Low temperature ashing instrument

Low temperature ashing instrument, Total:123 items.

The international standard classification for "Low temperature ashing instrument" includes: Welding, brazing and soldering , Coals , Adhesives , Products of the chemical industry , Industrial process measurement and control , Environmental testing , Optical equipment , Carbon materials , Gases for industrial application .

The Chinese standard classification for "Low temperature ashing instrument" includes: Lubricating oil , Petrochemical and chemical industry engineering , Solid fuel ore in general , Nonmetallic materials used for aviation and aerospace , Temperature and pressure instrument , Material composition analysis instrument and environment detection instrument in general , Basic laboratory equipment , Optical instrument in general , Carbon material in general , Industrial gas and chemical gas .

Group Standards of the People's Republic of China

T/CAR 6-2021 Automated cryogenic biobank
T/SXCIES 001-2021 Determination of viscosity-temperature characteristic of coal ash and slag in gasification : continuous cooling method
T/NXCL 010-2021 Low temperature curing silver conductor paste
T/CIET 552-2024 Technical requirements for low-temperature denitrification catalyst
T/SHDSGY 052-2023 Low temperature curing single component low stress insulating adhesive
T/CAMIE 10-2021 Sludge low temperature belt thermal drying machine
T/HEBQIA 256-2024 Low temperature shock analgesia device
T/SJZSYYQXH JZ008-2023 Calibration method of low temperature temperature tester
T/CSTM 00899-2024 Technical specifiction of pollution control for fly ash dioxins by catalytic decomposition under low temperature
T/SHDSGY 051-2023 Low temperature curing single component conductive adhesive
T/CISA 373-2024 Low temperature steel plate for LPG ships

Professional Standard - Petrochemical Industry

SH/T 3525-2004 Welding specification of low temperature steel for pertrochemical engineering
SH/T 0465-1992 No.4122 high-temperature instrument oil
SH/T 3525-2015 Welding specification of low temperature steel in petrochemical industry
SH/T 0385-1992 Grease 3 meter (54 low temperature grease)

Professional Standard - Coal

MT/T 853.1-2000 Classification for coal ash fusibility

Professional Standard - Aviation

HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles
HB 6744-1993 Flexure Test Under Low Temperature for Vulcanized Sealant at Room Temperature
HB 5274-1993 Test Method for Low Temperature Softness of Vulcanized Sealant at Room Temperature

Professional Standard - Military and Civilian Products

WJ 748-1994 Low temperature test method for adhesives used in optical instruments
WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments

工业和信息化部

WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments
WJ/T 748-2014 Low temperature test method for glue used in optical instruments
JB/T 13977-2020 Liquefied natural gas cryogenic submersible pumps

Hebei Provincial Standard of the People's Republic of China

DB13/T 2030-2014 Low temperature catalytic burner

Professional Standard - Machinery

JB/T 7386.1-1994 Industrial Automation Instrument Terms The Temperature Instrument?

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11606.3-1989 The method of environmental test for analytical instruments--Cold test
GB/T 12085.5-1989 Optics and optical instruments--Environmental test methods--Combined cold,low air pressure
GB/T 29189-2012 Thermo gravimetric analysis(TGA)for determination of oxidation temperature and ash content of carbon nanotubes
GB/T 12085.2-2010 Optics and optical instruments—Environmental test methods—Part 2:Cold,heat,humidity
GB/T 25475-2010 Industrial-process measurement and control instruments - Terminology - Temperature measuring instruments
GB/T 11606.14-1989 The method of environmental test for analytical insturments--Cold storage test
GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
GB/T 32710.3-2016 Safety requirements for environmental testing and conditioning equipment-Part 3:Refrigerated baths

Professional Standard - Chemical Industry

HG 3556-2004 Low temperature carbon monoxide shift catalyst
HG/T 3556-2012 Low Temperature Carbon Monoxide Shift Catalysts

Professional Standard - Ocean

HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
HY 21.2-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature storage test
HY 016.2-1992 Low temperature test for basic environmental test methods for marine instruments

Military Standard of the People's Republic of China-General Armament Department

GJB 940-1990 High and low temperature molybdenum disulfide grease
GJB 595.3-1988 Environmental test methods for artillery optical instruments - low temperature test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35528-2017 Safety guidelines for cryogenic liquefied gases

Taiwan Provincial Standard of the People's Republic of China

CNS 10021-1983 Method of test for torsion under low temperature of vulcanized rubber (→CNS 3564)

American Society for Testing and Materials (ASTM)

ASTM RR-D01-1014 1978 D3723-Test for Pigment Content of WaterEmulsion Paints byLow-Temperature Ashing
ASTM D4451-02(2008) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM D3723-05e1 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
ASTM D3723-84(1999) Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
ASTM D3723-05(2017) Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
ASTM D4451-85(1996) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM D3723-05(2011) Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
ASTM D4451-22 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM D4451-02(2021) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM D4451-02 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM D3723-05 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
ASTM D4451-02(2014) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM D3723-22 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
ASTM E2758-15a(2021) Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
ASTM E2758-10 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
ASTM E2758-15 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
ASTM E1311-89(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems

Society of Automotive Engineers (SAE)

SAE AMS2510A-1944 ENGINE GRAY FINISHING Low Baking
SAE AMS2510C-1968 ENGINE GRAY FINISHING Low Baking
SAE AMS2510-1940 ENGINE GRAY FINISHING Low Baking
SAE AMS2510B-1951 ENGINE GRAY FINISHING Low Baking
SAE AS8005-1977 MINIMUM PERFORMANCE STANDARD TEMPERATURE INSTRUMENTS
SAE AS8005A-1996 Minimum Performance Standard Temperature Instruments

German Institute for Standardization

DIN 58653:1960 Meteorological devices - Minimum thermometer
DIN 8902:1996 Pressure resistant circular sight glasses of soda-lime-glass without limitation in the range of low temperature
DIN 8903:1996 Pressure resistant oblong sight glasses of soda-lime-glass without limitation in the range of low temperature
DIN 8902 E:2019-11 Pressure resistant circular sight glasses of soda-lime-glass without limitation in the range of low temperature
DIN EN 12434:2000 Cryogenic vessels - Cryogenic flexible hoses; German version EN 12434:2000

South African Bureau of Standard

SANS 6300:2006 Lime tests - Isothermal slaking and preparation of quicklime

GSO

GSO ISO 7675:2015 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Chlorinated poly(vinyl chloride) (PVC-C)
GSO ISO 24490:2016 Cryogenic vessels -- Pumps for cryogenic service
BH GSO ISO 24490:2017 Cryogenic vessels -- Pumps for cryogenic service
OS GSO ISO 24490:2016 Cryogenic vessels -- Pumps for cryogenic service

GOST

GOST R 71143-2023 Cryogenic equipment. Apparatuses. Terms and definitions

SCC

CAN/CGSB-1.207-M91-1991 Low Temperature Curing Epoxy Coating
CAN/CGSB-1.207-1998 Low-Temperature Curing Epoxy Coating
DANSK DS/EN 12434/AC:2000 Cryogenic vessels – Cryogenic flexible hoses
AENOR UNE-EN 13275:2001 Cryogenic containers. Pumps for cryogenic use.
DANSK DS/EN 12434:2000 Cryogenic vessels – Cryogenic flexible hoses
NS-EN 12434:2000 Cryogenic vessels — Cryogenic flexible hoses
HOLDEN HN 1012-2001 Sealer Underbody - Low Temperature Cure
BS ISO 9022-5:1994 Optics and optical instruments. Environmental test methods-Combined cold, low air pressure

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE TO-98-4-1-1998 Rationalization of Low-Temperature to Medium-Temperature District Heating

Japanese Industrial Standards Committee (JISC)

JIS K 6261-3:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 3: Low temperature stiffening (Gehman test)
JIS K 6261-2:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 2: Low-temperature brittleness

Korean Agency for Technology and Standards (KATS)

KS B ISO 9022-5:2002 Optics and optical instruments－Environmental test methods－Part 5：Combined cold, low air pressure
KS M ISO 812:2009 Rubber, vulcanized or thermoplastic-Determination of low-temperature brittleness
KS B ISO 9022-5-2002(2017) Optics and optical instruments－Environmental test methods－Part 5：Combined cold, low air pressure
KS M ISO 812:2014 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
KS B ISO 24490-2022 Cryogenic vessels－Pumps for cryogenic service
KS M 6676-2008 Rubber, vulcanized or thermoplastic－Determination of low temperature properties
KS B ISO 24490-2017(2022) Cryogenic vessels－Pumps for cryogenic service
KS M ISO 2921-2014(2019) Rubber, vulcanized — Determination of low-temperature retraction (TR test)

International Organization for Standardization (ISO)

ISO 812:1991 Rubber, vulcanized; determination of low-temperature brittleness
ISO 1432:1976 Title missing - Legacy paper document
ISO 1432:1982 Rubber, vulcanized — Low temperature stiffening (Gehman test) — Determination

U.S. Air Force

AIR FORCE QPL-26626-QPD-2011 Hose Assembly, Reinforced, Cryogenic, Oxygen

British Standards Institution (BSI)

BS ISO 9022-5:1995 Optics and optical instruments - Environmental test methods - Combined cold, low air pressure
BS EN 12434:2000(2008) Cryogenic vessels - Cryogenic flexible hoses
BS EN 12434:2000 Cryogenic vessels - Cryogenic flexible hoses

Danish Standards Foundation

DS/ISO 813:1988 Rubber, vulcanized. Determination of adhesion to metal. One-plate method
DS/EN 12434/AC:2001 Cryogenic vessels - Cryogenic flexible hoses
DS/EN 12434:2000 Cryogenic vessels - Cryogenic flexible hoses
DS/EN 13275:2000 Cryogenic vessels - Pumps for cryogenic service

BE-NBN

NBN T 31-022-1985 Rubber, vulcanized - Low température stiffening (Gehman test) - Determination
NBN-ISO 812:1994 Rubber, vulcanized. Determination of low-temperature brittleness

Standard Association of Australia （SAA）

AS 2434.8:2002(R2013) Methods for analysis and inspection of low-rank coal and its coking matter Determination of ash content of low-rank coal

GOSTR

GOST R 59197-2020 Dry cement base adhesives, base coats for facade’s thermo insulation composite systems with external plaster lays for using at low temperature. Specifications

KR-KS

KS B ISO 24490-2017 Cryogenic vessels－Pumps for cryogenic service

Spanish Association for Standardization (UNE)

UNE 53541:2001 Rubber, vulcanized; determination of low-temperature brittleness.
UNE-EN 12434:2001 Cryogenic vessels - Cryogenic flexible hoses.
UNE-EN ISO 24490:2016 Cryogenic vessels - Pumps for cryogenic service (ISO 24490:2016)