repeatability deviation

repeatability deviation, Total:146 items.

The international standard classification for "repeatability deviation" includes: Steels pipes and tubes for specific use , Steels profiles , Steel wire, wire ropes and link chains , Steel bars and rods , Ferrous metals , Rubber compounding ingredients , Steels with special magnetic properties , Iron and steel products , Flat steel products and semi-products , Mechanical engineering drawings .

The Chinese standard classification for "repeatability deviation" includes: Steel tube and cast iron pipe , Profile steel and deformed steel , Carbon black , Steel sheet and strip , Optical instrument in general , Steel and iron products in general , Steel ingot and billet .

Professional Standard - Agriculture

GB 704-1983 Dimensions, shapes, weights and allowable deviations of hot-rolled flat steel
JB 2854-1980 Machining allowance, dimension deviation and weight deviation of iron castings

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9788-1988 Hot-rolled unequal-leg angle steel--Dimensions,shape,weight and tolerances
GB/T 705-1989 Hot-rolled hexagonal and octagonal steel bars--Dimensions, shape, weight and tolerance
GB/T 706-1988 Hot-rolled beam steel--Dimensions,shape,weight and tolerances
GB/T 17395-2008 Dimensions, shapes, masses and tolerances of seamless steel tubes
GB/T 905-1994 Dimension, shape, weight and tolerance for cold-drawn round, square and hexagonal steels
GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
GB/T 908-2008 Forged Bars - Dimensions, Shape, Weight and Tolerances
GB/T 707-1988 Hot-rolled channel steel--Dimensions,shape,weight and tolerances
GB/T 6726-1986 Cold forming sectional steel for cargo vehicle--Dimension, form, weight and permissible deviations
GB/T 14981-2009 Dimension shape mass and tolerance for hot-rolled round wire rod
GB/T 14981-2004 Dimensions,shape,mass and tolerances for hot-rolled wire rods
GB/T 7242-2010 Centering error of lenses
GB/T 702-2008 Hot-rolled Steel Bars - Dimensions, Shape, Weight and Tolerances
GB/T 708-2006 Dimension, Shape, Weight, and Tolerance for Cold-Rolled Steel Plat
GB/T 9787-1988 Hot-rolled equal-leg angle steel--Dimensions,shape,weight and tolerances
GB/T 702-2004 Hot-rolled round and square steel bars―Dimension,shape,weight and tolerance
GB/T 6726-2008 Cold forming sectional steel for vehicles - Dimensions shape weight and tolerances
GB/T 708-1988 Dimensions shape weight and tolerances for cold-rolled plates and sheets
GB 702-1986 Hot-rolled round and square steels—Dimension, shape, weight and tolerance
GB/T 6727-1986 Cold forming sectional steel for passenger vehicle; Dimension, form, weight and permissible deviations
GB/T 9946-1988 Dimensions,shape,weight and tolerances for hot-rolled L-sectional steel
GB 707-1988 Hot-rolled channel steel-Dimensions,shape,weight and tolerances
GB/T 708-2019(英文版) Dimension，shape，weight and tolerance for coldrolled steel strip and sheet
GB/T 709-1988 Dimensions, shape, weight and tolerances for hot rolled steel sheets and strips
GB/T 17395-2024 Dimensions, shapes, masses and tolerances of steel tubes
GB/T 15338-1994 Standard guide for carbon black--Validation of test method precision and bias
GB/T 702-1986 Hot-rolled round and square steels; Dimension,shape,weight and tolerance
GB/T 704-1988 Dimensions, shape, weight and tolerances for hot-rolled flats
GB/T 6723-1986 Cold forming sectional steel; Open sectional steel for general structure; Damnation, form, weight and permissible deviations
GB/T 17395-1998 Dimensions,shapes,masses and tolerances of seamless steel tubes
GB/T 16761-1997 Dimensions,shape,weight and tolerances for forged flats
GB/T 6728-2002 Cold Formed Steel Hollow Sections for General Structure - Dimensi
GB/T 709-2006 Dimension, Shape, Weight and Tolerances for Hot Rolled Sheets and
GB/T 6723-2008 Cold forming sectional steel - Open sectional steel for general structure - Dimensions shape weight and permissible tolerances
GB/T 14981-1994 Dimenisions shape weight and tolerances for hot-rolled wire rods
GB/T 908-1987 Forged round and square steels dimension, shape, weight and tolerance

Professional Standard - Ferrous Metallurgy

YB/T 001-1991 Dimension, shape, weight and tolerances of cog
YB/T 002-1991 Dimensions, shape, weight and tolerances for hot-rolled billet

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 908-2019 Forged bars for dimensions,shape,weight and tolerances
GB/T 709-2019 Dimension,shape,weight and tolerance for hot-rolled steel strip,plate and sheet
GB/T 708-2019 Dimension,shape,weight and tolerance for cold-rolled steel strip and sheet

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 702-2017 Hot-rolled steel bars - Dimensions, shape, weight and tolerances

Professional Standard - Aviation

HB 8626-2021 Airborne temperature sensor performance testing requires static indication error, recovery characteristics, dynamic response and temperature measurement deviation

Professional Standard-Ships

CB/T 3433-2013 Dimensions,shape,weight and allowable variation of symmetric section steel for ships
CB/T 3433-1992 Dimensions, shapes, weights and allowable deviations of symmetrical steel sections for ships

Professional Standard - Aerospace

QJ 771-1983 Limit deviation of dimensions without tolerance

Group Standards of the People's Republic of China

T/QGCML 3186-2024 Intelligent carbon monoxide gas detector indication error repeatability calculation system
T/QGCML 3187-2024 Intelligent oxygen gas detector indication error repeatability calculation and analysis software
T/QGCML 3188-2024 Intelligent sulfur hexafluoride gas detector indication error repeatability calculation software

Taiwan Provincial Standard of the People's Republic of China

CNS 518-1955 Tolerance of Whitworth Threads (Fine Fit)

IT-UNI

UNI 4202-1959 Zinc belt. Dimensions, deviations and weight
UNI 4201-1959 Zinc plate. Dimensions, deviations and weight
UNI 1751-1752-1941 Elastic gasket. Dimensions and deviations
UNI 468-1970 Round steel rod with h11 deviation. Dimensions and deviations
UNI 472-1970 Square wire steel pole with h11 deviation. Dimensions and deviations
UNI 469-1970 Precision round steel rod with h9 deviation. Dimensions and deviations
UNI 471-1970 Hexagonal wire steel rod with h10 deviation. Dimensions and deviations
UNI 3885-1957 Aircraft series engine characteristic deviations
UNI 470-1970 Hexagonal wire steel rod with h11 deviation. Dimensions and deviations
UNI 7226-P3-1973 Technical drawings. Shape and position deviation. Description of contour shape deviations
UNI 2089-1956 Wood fiber soft panel. Thickness and deviation
UNI 5415-1964 Elastic materials: finished products, stamped parts, dimensional deviations

South African Bureau of Standard

SANS 3001-PR1:2008 Civil engineering test methods Part PR1: Determination of uncertainty of measurement, repeatability, reproducibility and bias

PL-PKN

PN H83104-1972 Groy iron castings Dimensional tolerances, machining allowan- ces and weight deviaiions
PN H83154-1972 Steel castings Dimensional ?olerances. Machining allowan- ces and wieght deviations
PN H83207-1974 Non-ferrons metal castings Dimensional tolerances machining allowan- ces and weight deviations

German Institute for Standardization

DIN EN 336:2003 Timber for load-bearing purposes Dimensions, permissible deviations
DIN 178:1969 Bright Square Steel; Dimensions, Permissible Variations, Weights
DIN 6880:1975 Bright Key Steel; Dimensions, Permissible Variations, Weights
DIN 6880 E:2006-06 Bright Key Steel; Dimensions, Permissible Variations, Weights
DIN 59350:1982 Precision flat and square steel bars; Dimensions, weights, permissible deviations
DIN 59350 E:2006-06 Precision flat and square steel bars; Dimensions, weights, permissible deviations
DIN 513-3 E:2019-07 Metric buttress threads - Part 3: Deviations and tolerances
DIN 513-3:2020-12 Metric buttress threads - Part 3: Deviations and tolerances
DIN 59370:1978 Steel Sections; Bright Square Edge Equal Angles; Dimensions, Permissible Deviations, Weights
DIN 513-3 Metric buttress threads - Part 3: Deviations and tolerances
DIN 58172-1:1982 Testing of optical systems; deviations from symmetry
DIN 405-2:1997 General purpose knuckle threads - Part 2: Deviations and tolerances
DIN 7155-1:1966-08 ISO-fits for the shaft basis system; tolerance zones, deviations
DIN 7154-1:1966-08 ISO-fits for the hole basis system; tolerance zones, deviations
DIN 7155-1 ISO-fits for the shaft basis system; tolerance zones, deviations
DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 513-3:1985 Metric buttress threads; deviations and tolerances
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations

CU-NC

NC 02-06-1968 Representation of linear and angular desviations
NC 01-05-1967 Deviation of dimensions without tolerance indication.

AT-ON

ONORM M 3226-1969 Steel bars; hot rolled square steel.
ONORM M 1373 Teil.1-1985 Rough castings ofheavy metal alloys; dimensional variations

CZ-CSN

CSN 01 4421-1982 Measuring of deviations of straightness
CSN 01 4422-1982 Measuring of deviations of flatness.
CSN 795790-2001 Footwear - Acceptable deviations

NL-NEN

NEN 2431-1967 Bright key steel. Dimensions, toierances, weights
NEN 2886-1990 Maximum permissible dimensional deviations for buildings Stony load bearing structures
NEN 2888-1990 Maximum permissible dimensional deviations for the erection of load bearing structures of buildings

SCC

AWWA WQTC62518 Evaluating Turbidity Performance Excursions
NS 1557:1966 ISO tolerances and fits — Bore tolerances — Selection for general purposes
NS 1558:1966 ISO tolerances and fits — Shaft tolerances — Selection for general purposes
DIN 513-3 E:2019 Draft Document - Metric buttress threads; deviations and tolerances
JIS B 1702-3:2020 Cylindrical gears -- System of tolerance classification -- Part 3: Definitions and allowable values of deviations relevant to corresponding gear-tooth flanks and radial-composite deviations of injection-molded plastic gears
DIN 1542:1959 Sheet steel von 3 to 4.75 mm (middle plate), thicknesses, sizes, weights and measures deviations
BS 3730:1964 Assessment of departures from roundness

Standard Association of Australia （SAA）

AS 2884.4:1997 Heavy mineral sand concentrates - Sampling - Determination of precision and bias

Korean Agency for Technology and Standards (KATS)

KS D 3051-2022 Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
KS D 3052-2022 Shape, dimensions, weight and tolerances of hot-rolled steel flats
KS B 0420-2015 Deviations for Center Distances
KS B 0420-2020 Deviations for Center Distances
KS B 0420-2015(2020) Deviations for Center Distances
KS B 0420-1985 Deviations for Center Distances
KS B ISO 1328-2-2020 Cylindrical gears－ISO system of accuracy－Part 2：Definitions and allowable values of deviations relevant to radial composite deviations and runout information
KS D 3500-2019 Dimensions, weight and permissible variations of hot rolled steel plates, sheets and strip
KS D 3500-1986 Dimensions, weight and permissible variations of hot rolled steel plates, sheets and strip
KS B 0420-1971 Deviations for Center Distances

Danish Standards Foundation

DS 1103.7:1982 Test methods for rigid flat sheets — Determination of dimensions, angular and form deviations
DS 687:1990 Kunuckle thread. Deviations and tolerances

International Organization for Standardization (ISO)

ISO 13942:2000 Bonded abrasive products - Limit deviations and run-out tolerances
ISO 5864:1978 ISO inch screw threads; Allowances and tolerances

American National Standards Institute （ANSI)

ANSI/TIA/EIA 526-15-1993 Jitter Tolerance Measurement

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-A102-C-2000 Accelerated Moisture Resistance - Unbiased Autoclave
JEDEC JESD22-A102E-2015 Accelerated Moisture Resistance - Unbiased Autoclave
JEDEC JESD22-A101-B-1997 Steady-State Temperature Humidity Bias Life Test
JEDEC JESD22-A102D-2010 Accelerated Moisture Resistance - Unbiased Autoclave

Japanese Industrial Standards Committee (JISC)

JIS B 1702-2:1998 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
JIS Z 9046:1965 Significance test of difference between the two population means (standard deviations known, one-sided)
JIS Z 9048:1979 Significance test of difference between the two population means (standard deviations unknown, one-sided)
JIS Z 9047:1979 Significance test of difference between the two population means (standard deviations known, two-sided)
JIS B 1702-3:2008 Cylindrical gears -- The accuracy -- Part 3: Definitions and allowable values of deviations relevant to corresponding flanks of the gear teeth and radial composite deviations of injection molding plastic gears
JIS Z 9049:1965 Significance test of difference between the two population means (standard deviations unknown, two-sided)
JIS B 0613:1976 Deviations for centre distance

American Gear Manufacturers Association

AGMA 90FTM11-1990 Multiple Iteration- Respectable Trial-and-Error
AGMA 2015-2-B15-2015 Gear Tooth Flank Tolerance Classification System - Definitions and Allowable Values of Double Flank Radial Composite Deviations

RU-GOST R

GOST 24980-1981 Glass containers. Method of determination of size, mass, capacity and shape deviation
GOST 24980-1992 Glass containers. Method of determination parameters
GOST 24980-2005 Glass containers. Methods of testing the parameters

GOST

GOST 10356-1963 Deviations in the shape and location of surfaces. Basic definitions. Limit deviations

SAE - SAE International

SAE ARP794-1968 Airstream Deviation Instrument (ADI)

GSO

OS GSO ISO 1328-2:2013 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information

DIN

DIN 1542:1929 Sheet steel von 3 to 4.75 mm (middle plate), thicknesses, sizes, weights and measures deviations
DIN 1542:1924 Sheet steel von 3 to 4.75 mm (middle plate), thicknesses, sizes, weights and measures deviations
DIN 1542:1933 Sheet steel von 3 to 4.75 mm (middle plate), thicknesses, sizes, weights and measures deviations

Society of Automotive Engineers (SAE)

SAE ARP794-1991 AIRSTREAM DEVIATION INSTRUMENT (ADI)
SAE ARP794A-2008 Airstream Deviation Instrument (ADI)

YU-JUS

JUS K.F1.006-1990 Bonded abrasive products. Limit deviations and run-out tolerances

IN-BIS

IS 4897-1994 Deviations on untoleranced dimensions and mass of steel castings

SE-SIS

SIS SMS 2170-1966 Metric screw threads. Tolerances. Deviations for constructional threads

Others: standard deviation,curve deviation,linearity deviation,line deviation,Material deviation,unknown bias,Color deviation,Variation coefficient,Calibration bias,concentration deviation,Forging deviation,data bias,Deviation formula,data bias,Offset Calibration Offset,work deviation,signal deviation,repeatability deviation,repeatability deviation