R & D conditions

R & D conditions, Total:322 items.

The international standard classification for "R & D conditions" includes: Electrical and electronic equipment , Engine block and internal components , Internal combustion engines for road vehicles , Grinding and polishing machines , Measurement of volume, mass, density, viscosity , Connecting devices , Iron and steel forgings , Rotating machinery , Generating sets , Agricultural tractors and trailed vehicles , Watches , Measurement of force, weight and pressure , Generators , Other products of the textile industry , Coals , Electrical equipment of ships and of marine structures , Diagnostic, maintenance and test equipment , Power stations in general , Wind turbine systems and other alternative sources of energy , Industrial robots. Manipulators , Horology in general , Protection against crime , Industrial process measurement and control , Hydraulic energy engineering , Military engineering. Military affairs. Weapons .

The Chinese standard classification for "R & D conditions" includes: Electronic and electrical equipment , Intake, exhaust and fuel supply systems , Engine body and moving parts , New energy vehicle and other automobiles , Lubrication and cooling systems; heating devices , Car , Grinding machine , Physical property analyzer , Electrician alloy parts , Forging and pressing , Special machine , Generating unit , Steam turbine and its auxiliary equipment , Synchronous machine , Electrical devices and instruments , Ultrasonic wave and sound radiation defectoscope , Micro machine , Industrial electric heating equipment , Technical management , Technical management , Highway vehicle servicing installation , Toys , Sewing machine , Horology , Crushing and grinding equipment , Facsimile telegraph equipment , Engine , Launching and launch-control equipment , Engine , Engine auxiliary system and its accessories , General technical requirements , Electric rotating machinery in general , Other textile articles , Coal for power station and industrial boiler , High voltage switchgear , Power generation, transformation and distribution equipment for vessel , Highway vehicle utilization, maintenance and service , , Wind energy , Automatic logistics equipment , Social and public safety in general , Other generating equipment , Valve , Automatic control and remote control equipment , Special instruments for teaching , Water turbine and its auxiliary equipment , Railway passenger coaches .

Professional Standard - Automobile

QC/T 29031-1991 Specifications for electroplated coatings of automobile bearing bush
QC/T 469-2016 Automobile engine valve specification
QC/T 570-1999 Automobile engine cylinder liners - Specifications
QC/T 527-1999 Automobile engine connecting rod technical conditions
QC/T 729-2005 Automotive alternator technical specification
QC/T 469-2002 Technical condition of the automotive engine valve
QC/T 693-2002 Technical specification of liquefied petroleum gas engine
QC/T 544-2000 Technical Requirements for Automobile Engine Camshafts
QC/T 693-2011 Technical specification of Liquefied petroleum gas engine
QC/T 29094-1992 Automotive alternator technical specification
QC/T 289-2001 Technical specifications for oil pump of automotive engine
QC/T 282-1999 Technical Specification for Crank Shaft Thrust Piece for Vehicle Engine
QC/T 288.1-2001 Automotive engine cooling water pump conditions
QC/T 737-2005 Specifications for cast-iron piston ring of passenger car engine
QC/T 521-1999 Specifications for automobile valve lifters
QC/T 481-1999 Specifications of crankshaft for vehicle engine
QC/T 481-2005 Specifications of crankshaft for vehicle engine

Professional Standard - Machinery

JB/T 8613-1997 Technical conditions for engine comprehensive test bench
JB/T 1270-2002 Specification for Shaft Forgings for Hydroturbines and Hydrogen
JB/T 12218-2015 Specification for permanent magnet coreless generator
JB/T 12137-2015 Shaft forgings used for wind turbinc-Technical specification
JB/T 11028-2010 Specification of Collector Ring Forging for Steam Turbine Generator
JB/T 7596-1994 Technical specification for charging generator intended to be used in watercrafts
JB/T 1269-2002 Specification for magnetic ring forgings for turbine generators
JB/T 2841-1993 Controlled Gas Generation Device Basic Technical Conditions
JB/T 10134-1999 Tehnical specifications for alternatie generator with vaccum pump
JB/T 7596-2010 Specification of charging generating set in ships
JB/T 7026-2004 Specification for rotors forgings used below 50MW turbine generator
JB/T 11509-2013 Polyurethane Foaming Equipment - General Specifications
JB/T 1268-2014 Mn18Cr5 Series Nonmagnetic Retaining Ring Forgings for Turbine Generator - Technical Specification
JB/T 7178-2002 Specification for rotor forgings for 300MW to 600MW turbine generators
JB/T 5579-1991 Technical conditions of vacuum evaporation mirror coating equipment
JB/T 7023-2014 Thrust Runner Forgings for Hydraulic Generators - Technical Specification
JB/T 1270-2014 Shaft Forgings for Hydraulic Turbines and Hydraulic Generators - Technical Specification
JB/T 7178-1993 300-600 MW Turbine Generator Rotor Forging Specifications
JB/T 4271-2011 Specification for three-phase synchronous generator in ships
JB/T 6506-1992 Turbine Specification for Geothermal Power Generation
JB/T 9578-1999 Technical Requirements for Rare-earth Permanent Magnetism Synchronous Generator
JB/T 6761-1993 General Technical Specifications for Pulse Tachogenerators
JB/T 1268-2002 Specification for nonmagnetic retaining ring forgings for 50MW to 200MW turbine generators
JB/T 5754-1991 Specifications for One-channel Acoustic Emission Testing Instrument
JB/T 7071-1993 Basic Technical Conditions of Bulb Type Hydrogenerator
JB/T 9583.1-1999 General technical conditions for gas fuel generating sets
JB/T 1267-1993 25---200 MW Turbogenerator Rotor Forging Specifications
JB/T 1270-1993 Specifications for large shaft forgings of hydraulic turbines and hydroelectric generators
JB/T 11419-2013 Technical Specification for Evaporative Condensator Cooling Fan
JB/T 9455-1999 Specifications for the hair hygrometer
JB/T 11817-2014 Specification for small-scale single phase synchronous generators
JB/T 2661-2015 Specification for ZCF series direct current tachogenerator
JB/T 1267-2002 Specification for rotor forgings for 50MW to 200MW turbine generators
JB/T 9923.2-1999 Technical conditions of double disc grinder
JB/T 7023-1993 Specifications for mirror plate forgings for hydroelectric generators
JB/T 11775.2-2014 CNC Bevel Gear Lapping Machines - Part 2: Specifications
JB/T 6454-2008 Technical specification for heating resistance alloys
JB/T 9911.2-1999 Steel ball grinding machine technical conditions
JB/T 10304-2001 Gasoline generating sets of 50Hz technical conditions for
JB/T 7030-2002 Specification for nonmagnetic retaining ring forgings for 300MW to 600MW turbine generators
JB/T 6454-1992 Technical conditions of heating resistance alloy
JB/T 9455-2015 Hair hygrometer. Specifications
JB/T 9454-2015 Hair hygrograph. Specifications
JB/T 11662-2013 Technical requirements for moulds of EPS and EPP foaming
JB/T 7023-2002 Specification for runner plate forgings for hydrogenerators
JB/T 7026-1993 Specifications for rotor forgings of turbine generators below 50MW
JB/T 7071-2013 Fundamental technical specifications for bulb hydro generators
JB/T 8167-1996 Specifications of Automobile Alternator Bearings
JB/T 10303-2001 Diesel generating sets of 50Hz technical conditions for
JB/T 9623-1999 Specification for exhaust muffler of fossil power plant
JB/T 5575-1991 Technical conditions of vacuum evaporation optical coating equipment
JB/T 2661-1999 Specification for ZCF series direct current tachogenerator
JB/T 9454-1999 Specifications for the hair hygrograph
JB/T 7071-2005 Basic specification for bulb hydro generators
JB/T 1269-1993 Specifications for magnetic ring forgings for turbogenerators
JB/T 5576-1991 Technical conditions for vacuum evaporation decorative coating equipment
JB/T 9911.2-2007 Steel ball lapping machine-Part 2:Specifications
JB/T 7030-2014 Mn18Cr18N Nonmagnetic Retaining Ring Forgings for Turbine Generators - Technical Specification
JB/T 10265-2014 Upper and Lower Disk Forgings for Hydraulic Generators - Technical Specification
JB/T 7143.1-1993 Specifications for inverters for wind turbines
JB/T 10265-2001 Forging specification for upper and lower disks for hydraulic generators
JB/T 1269-2014 Specification for Magnetic Ring Forgings for Turbine Generators
JB/T 3320.2-2000 Specification for small size single - Phase synchronous generator
JB/T 11663-2013 Technical requirements for moulds of PU foaming
JB/T 1267-2014 Rotor Forgings for 50MW to 200MW Turbine Generators - Technical Specification

Group Standards of the People's Republic of China

T/ZGWJHXH 47-2023 Technical conditions for measuring cylinders used in power generation boilers
T/ZAITS 30301-2023 Specification on electronic documents archiving of procurement management of new research and development institutions
T/IQA 15-2022 Measurement Specification of Software Development Efficiency, Effectiveness and Excellence
T/GQYH 0228-2024 Guidelines for the development and application of knowledge components for military product development
T/JSLYXH 001-2021 Evaluation specification for research and development base of culture and tourism equipment technology
T/SDIRAA 323-2022 Software architecture and development specifications in the field of scientific research
T/HBMIF 001-2022 Technical requirement of engine flywheel ring gear
T/CEEIA 238-2016 Specifications for mirror plate forgings for large hydroelectric generators
T/JSJJ 006-2022 General technical requirements for intelligent sofa
T/CEEIA 237-2016 Specifications for main shaft forgings of large hydroelectric generating units
T/HBMIF 002-2022 Technical requirement of engine flywheel assembly
T/ZASDI 0001-2021 Guidelines for the development and application of product development knowledge components in the military industry
T/CSAE 103-2019 Technical conditions of low friction diamond-like films for engine parts
T/QGCML 1244-2023 Computer software development requirements research system
T/SHMHZQ 054-2022 Technical development process specification
T/QGCML 1676-2023 Technology course development process
T/BIAIM 0009-2024 General quality specification for automotive R&D simulation analysis software tools
T/ZPP 036-2023 Technical conditions for the production of luminescent building materials for construction
T/CFA 02010101.1-2020 Technical specifications of cylinder block castings for commercial vehicle
T/CFA 02010101.2-2020 Specifications for commercial vehicle engine cylinder head castings

Professional Standard - Electron

SJ/T 11463-2013 Specification for software research and development cost measurement
SJ 3223-1989 General specification for transmitting system of ground radar
SJ/T 10193-1991 Specifications for signal generator for Type QF1076
SJ 2774-1987 Generic specification for hand generators
SJ/T 10405-1993 Specification for 50kW medium wave AM broadcast transmitter
SJ/T 10522-1994 General specification for character generator
SJ 2524-1984 Specification for microwave reference signal generators
SJ/T 10613-1995 General specification for clock and station mark generators
SJ/T 10351-1993 Generic specification for television transmitters
SJ/T 10472-1994 Specification for function generators
SJ/T 10200-1991 General specification for stereo signal generators

Professional Standard - Nuclear Industry

EJ/T 763-1993 Light water test research reactor water quality technical conditions
EJ/T 764-1993 Water Quality Technical Conditions for Heavy Water Research Reactor

Professional Standard - Traffic

JT/T 114-1993 Specifications for pneumatic valve grinder
JT/T 106-1991 Technical requirements for automobile engine camshafts being overhauled
JT/T 105-1991 Technical requirements for automobile engine crankshafts being overhauled

Professional Standard - Light Industry

QB/T 2505-2000 Technical Specification for Sewing Machine Parts Blackening
QB/T 2360-1998 General Technical Specifications for Wind-up Toy
QB/T 2899-2007 Timekeeping instruments-Conditions for carrying out checks on redioluminescent deposits
QB/T 2310-1997 Clockwork
QB/T 5115-2017 Technical specification of polyvinyl chloride foam mat

Professional Standard - Military and Civilian Products

WJ 1827-1988 Fuze standard spring

Professional Standard - Geology

DZ/T 0192-1997 Technical conditions for laboratory triple head grinding machine

Professional Standard - Post and Telecommunication

YD/T 506-1991 Technical specification of automatic transmitter
YD/T 1247-2002 Technical condition of optical transmitter module for optical fiber analog transmission

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 719-2013 Technical conditions of permanent magnet generator

Professional Standard - Aviation

HBm 84-1989 Specifications for motorcycle engine transmission
HB 6719-1993 General Technical Specifications for Engine Model
HBm 76.5-1988 Motorcycle DC Generator Specifications
HBm 46-1985 Moped engine connecting rod specification
HBm 63-1987 Moped - General Technical Specification for the Engine
HBm 44-1985 Moped engine piston specification
HB 5525-1980 General Technical Specifications for Aviation Launch Bazooka
HB/Z 132.9-1989 Guidelines for the manufacturing process of aero-engines Process scientific research and test work management regulations
HB 5609-1980 Engine Clamp Specifications
HB/Z 132.2-1989 Guidelines for aero-engine manufacturing process work Regulations for the management of new aircraft development process work
HB 3434-1984 Technical conditions for small size blade type pneumatic engine series
HB 5621-1980 Specifications for Professional Technology of Aero-engine Tachometer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7562-1998 Technical condition of coal used for pulverized coal-fired boiler for power generation
GB/T 12975-1991 General specification for synchronous generator in ship
GB/T 14824-1993 Common technical requirements for generator circuit-breaker
GB/T 5578-1985 Specification for stationary steam turbines driving generator
GB/T 28566-2012 Security specification and its evaluation for generating unit interconnection
GB/T 23479.1-2009 Wind turbine double-fed asynchronous generator - Part 1: Technical specification
GB/T 23167-2008 Hair products - Manmade dyeing hair weaving and hair braid
GB/T 12181-1990 General purpose specification of low frequency signal generators
GB/T 7894-2009 Fundamental technical specifications for hydro generators
GB/T 3799-1983 Technical requirements for automobile engines being received from major overhaul
GB/T 20834-2007 Fundamental technical specifications for generator-motor
GB/T 9317-1988 Specifications of pulse signal generators
GB/T 7894-2001 Fundamental Technical Specifications for Hydro Generators
GB/T 13183-1991 General specification for sweep signal generators
GB/T 26470-2011(英文版) General specification for launching machine
GB/T 10760.1-1989 Specification for small wind generators
GB/T 13032-1991 General specification for marine diesel generator set
GB/T 19071.1-2003 Asynchronous generator for wind turbine generator systems—Part 1:Technical condition
GB/T 12975-2008 General specification for synchronous generator in ship
GB/T 20834-2014 Fundamental technical specifications for generator-motor
GB/T 27989-2011 Fundamental technical requirements for small hydraulic generators
GB/T 12114-1989 Generic specification of high frequency signal generators
GB/T 19069-2003 Technical condition for electrical controller of wind turbine generator systems
GB/T 7562-2010 Specification of coal used for pulverized coal-fired boiler for power generation
GB/T 12179-1990 General specifications of noise generators
GB/T 23168-2008 Hair products - Human hair weaving
GB/T 19071.1-2018 Wind turbines—Asynchronous generator—Part 1:Technical conditions
GB/T 26680-2011 Technical requirements for permanent magnet synchronous generator
GB/T 32231-2015 General technical specifications of engine used for all-terrain vehicles

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 23167-2019 Hair products-Manmade dyeing hair weaving and hair braid
GB/T 41148-2021 General requirements for gas fuel generating sets
GB/T 12975-2021 General specification for synchronous generator in ships
GB/T 40673-2021 Timekeeping instruments—Conditions for carrying out checks on radioluminescent deposits
GB/T 23168-2019 Hair products-Human hair weaving
GB/T 39407-2020 Grinding and polishing robot system—General specification
GB/T 37074-2018 Technical requirements of ultraviolet excitation fluorescent anti-counterfeiting fiber

Military Standard of the People's Republic of China-General Armament Department

GJB 9082-2017 Minimum launch conditions for launch vehicle test launch
GJB 9628-2019 Minimum launch conditions for launch vehicles
GJB 400-1987 Technical specifications of marine electric DC generator sets
GJB 514-1988 Technical conditions of marine electric power frequency generator sets
GJB 399-1987 Technical conditions of marine electric medium frequency generator sets
GJB 203-1986 Technical conditions of marine medium frequency generators

Professional Standard - Chemical Industry

HG/T 4754-2014 Specifications for steel fermentation vessels

Professional Standard - Energy

NB/T 31060-2014 The environmental conditions of the wind power equipment
NB/T 10442-2020 Basic procedures for research and development of wave and tidal current energy converters
NB/T 31064-2014 Technical specifications for off-shore type double-fed wind generator

Professional Standard - Electricity

DL/T 591-2010 Specification of instrumentation and control for turbine-generator in fossil fuel power plant
DL/T 776-2001 Technical requirements for insulation material of thermal power plants
DL/T 1110-2009 Fundamental technicalspecifications for evaporative cooling horizontal electrical machinery
DL/T 1067-2007 Fundamental technical specifications for evaporative cooling hydrogenerator (generator/motor)
DL/T 1067-2020 Fundamental technical specification for evaporative cooling hydro generators
DL/T 2662-2023 Technical specifications for heat supply retrofit of Coal-fired power units
DL/T 1628-2016 Specification for excitation transformers of hydro turbine generator
DL/T 843-2021 Specification for excitation system for synchronous generators
DL/T 923-2005 Specification of check valves for thermal power plant

Professional Standard - Education

JY 199-1985 Technical conditions of frog embryo development model
JY 148-1982 General Technical Specifications for Frog Development Sequence Specimen
JY 21-1979 Technical Conditions of Hand AC/DC Generators (Trial Implementation)
JY 0114-1994 Specification for transmitting and receiving of electromagnetic wave demonstrator

工业和信息化部

QC/T 1090-2017 Specifications of sealing gaskets for automotive engines
JB/T 10303-2020 Diesel generating sets of 50Hz technical conditions for
QC/T 1122-2019 Technical specifications of electric water pump for vehicle engine
QC/T 1145-2021 Technical specifications of diesel/methanol dual-fuel engine
QC/T 1146-2021 Technical specifications of methanol fuel engine
JB/T 7026-2018 Rotor forgings for 50 turbine generators and below一Technical specification
JB/T 10304-2020 Gasoline generating sets of 50Hz technical conditions for

Professional Standard - Agriculture

NY/T 845-2004 General technical qualification of generator for micro - Hydro power generating equipments

Professional Standard - Petroleum

SY/T 5683-1995 Technical conditions for well logging neutron generators

Chongqing Provincial Standard of the People's Republic of China

DB50/T 380-2011 Technical conditions for small synchronous generators

国家能源局

NB/T 10940-2022 Specification for exhaust muffler of fossil power plant
NB/T 31100-2016 Technical requirements of electrical excitation synchronous generator for wind turbine
NB/T 10831-2021 Specification of thrust runner disc forgings for large hydro-generators
NB/T 42113-2017 Small and medium power gas generating set general technical specifications
NB/T 10442-2021 Basic procedures for the development of wave energy and tidal energy conversion devices
NB/T 10830-2021 Specification of main shaft forgings for large hydro-generator set

机械工业部

JB/T 7074-1993 General technical conditions for gas turbine generators

Fujian Provincial Standard of the People's Republic of China

DB35/T 1814-2018 General technical requirements for black tea fermentation equipment

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1808-2018 Technical conditions of stone foam lightweight wallboard

Professional Standard - Forestry

LY/T 1152-1994 Technical conditions of forest tree seed light germination device

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 2879-2008 General engineering factor for zhe non fermentable Bean poroducts

Professional Standard - Aerospace

QJ 1016-1986 General technical requirements for engine piping system
QJ 650-1984 General technical requirements for tactical missile launch equipment and launch control equipment
QJ 1295-1987 General technical conditions for triggering fuzes of tactical missiles

Professional Standard-Ships

CB*/Z 349-1987 Technical conditions for device to seal foaming cable
CB/Z 349-1987 Technical conditions of foam type cable sealing device
CB 1222-1993 Technical Conditions for Installation of Submarine Thunder Launching Unit

Jilin Provincial Standard of the People's Republic of China

DB22/T 2316-2015 Specifications for automotive engine flywheel ring gear

中国石油化工总公司

SH 2002-1991 Technical conditions of ammonia evaporation tube crystallizer

Association Standard-China Association for Standardization

CAS 178-2009 Technical Requirements for Small Motor Vehicle Gasoline Engine

工业和信息化部/国家能源局

JB/T 6761-2016 General specification for pulse tachogenerator
JB/T 13288-2017 Engines. Piston cooling jets(PCJ). Specification

Professional Standard - Medicine

YY 91112-1999 Specifications for electrically heated steam generators for medical use

Professional Standard - Railway

TB 1450-1982 Basic technical specifications of synchronous generators for locomotives
TB/T 2396-1993 Techinical Conditions of Generator Car of Railway Passenger Car with Air Conditioner

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 10760.1-2017 Generator of small wind turbines - Part 1: Technical condition

Professional Standard - Water Conservancy

SL 321-2005 Fundamental technical specifications for large and medium hydrogenerators

CZ-CSN

CSN 22 4701-1986 Grinding tools. Grinding segments. Technical rules
CSN 42 0009-1978 Inspection ccrliticate. Conditions for issue

RU-GOST R

GOST 5009-1982 Abrasive cloth. Specifications
GOST 13344-1979 Waterproof abrasive cloth. Specifications
GOST 14068-1979 Paste VNII NP-232. Specifications
GOST 19782-1974 Paste VNII NP-225. Specifications
GOST 19774-1974 Grease VNII NP-207. Specifications
GOST 19337-1973 Grease VNII NP-274. Specifications
GOST 19832-1987 Grease VNII NP-260. Specifications
GOST 8073-1977 Nonfermented tobacco-material. Specifications
GOST 14296-1978 Grease VNII NP-279. Specifications
GOST 16105-1970 Grease VNII NP-257. Specifications
GOST 1028-1979 Black powder. General specification
GOST 6948-1981 Foaming agent PO-1. Specifications
GOST 9043-1993 Electric appliances for hair-cutting. General specifications
GOST 10227-1986 Jetfuels. Specifications
GOST 16264.0-1985 Small power electric machines. Motors. General specifications
GOST 23650-1979 Tobacco-fermented material, supplied for export. Specifications
GOST 7129-1979 Raw uncured makhorka (kind of shag). Specification

Korean Agency for Technology and Standards (KATS)

KS A IEC 60706-2:2008 Maintainability of equipment-Part 2:Maintainability requirements and studies during the design and development phase
KS R ISO 26262-5:2015 Road vehicles — Functional safety — Part 5: Product development at the hardware level

U.S. Military Regulations and Norms

ARMY AR 70-38-1979 RESEARCH DEVELOPMENT, TEST AND EVALUATION OF MATERIEL FOR EXTREME CLIMATIC CONDITIONS, REPRINT INCORPORATES CHANGE 1

British Standards Institution (BSI)

BS EN IEC 62614-1:2020 Fibre optics. Multimode launch conditions - Launch condition requirements for measuring multimode attenuation
BS ISO 26262-5:2011 Road vehicles. Functional safety. Product development at the hardware level

International Telecommunication Union (ITU)

ITU-T I.252. 4-1992 Call Forwarding Unconditional (Study Group I) 13 pp
ITU-T I.252.4 FRENCH-1992 Call Forwarding Unconditional (Study Group I) 13 pp
ITU-T I.252.4 SPANISH-1992 Call Forwarding Unconditional (Study Group I) 13 pp
ITU-T H.248.47-2008 Gateway control protocol: Statistic conditional reporting package Study Group 16
ITU-R SM.1752 SPANISH-2006 Limits for unwanted emissions under free-space condition
ITU-R SM.1752 FRENCH-2006 Limits for unwanted emissions under free-space condition
ITU-T G.7714 AMD 1-2012 Protocol for automatic discovery in SDH and OTN networks Amendment 1: New Appendix VI – Usage of the different discovery mechanisms (Study Group 15)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE CI-01-11-2001 Symposium on Psychrometrics at Extreme Conditions
ASHRAE CI-01-1-2001 Symposium on Air Velocity Measurements in Non-Ideal Flow Conditions
ASHRAE CH-06-8-2006 Symposium on Latest Findings in Commercial Kitchen Ventilation Research
ASHRAE KC-03-7-2003 Symposium on Developments in Radiant Cooling

US-FCR

FCR COE RPMAS 39680-1977 CARPETING M & R
FCR COE RPMAS 37100-1977 WATERPROOFING M & R
FCR COE RPMAS 39550-1977 WOOD FLOORING M & R
FCR FED H-08-9 CHAP 278-1983 MEDICAL RESEARCH AND DEVELOPMENT

SCC

BS PD IEC/TR 62614-2:2015 Fibre optics. Multimode launch conditions-Determination of launch condition requirements for measuring multimode attenuation
DANSK DS/EN IEC 62614-1:2020 Fibre optics – Multimode launch conditions – Part 1: Launch condition requirements for measuring multimode attenuation
CEI EN IEC 62614-1:2021 Fibre optics - Multimode launch condition Part 1: Launch condition requirements for measuring multimode attenuation
DANSK DS/IEC TR 62614-2:2015 Fibre optics - Multimode launch conditions - Part 2: Determination of launch condition requirements for measuring multimode attenuation
AENOR UNE 166002:2021 R&D Management: Requirements of R&D Management System.
AENOR UNE 166000:2006 R&D&I Management: Terminology and definitions of R&D&I activities.
CIE x028:2005 Proceedings of the CIE Symposium '05 Vision and Lighting in Mesopic Conditions
AENOR UNE 166003 EX:2003 R&D&I management: Competence and evaluation of auditors of R&D&I projects.
CEI 75-15:1997 Classificazione delle condizioni ambientali - Parte 2: Condizioni ambientali presenti in natura - Polvere, sabbia, nebbia salina
AENOR UNE 20367/1C:1980 CRUSHER COFFEE GRINDERS AND BLADE COFFEE GRINDERS FOR DOMESTIC AND ANALOGUE USES. SPECIAL SECURITY CONDITIONS
AENOR UNE 20367:1974 CRUSHER COFFEE GRINDERS AND BLADE COFFEE GRINDERS FOR DOMESTIC AND ANALOGUE USES. SPECIAL SECURITY CONDITIONS

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 62614-1:2020 Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation

Spanish Association for Standardization (UNE)

UNE-EN IEC 62614-1:2020 Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation (Endorsed by Asociación Española de Normalización in October of 2020.)

GSO

SD 270-1988 Technical requirements for steam turbine generators
BH GSO IEC TR 62614-2:2022 Fibre optics - Multimode launch conditions - Part 2: Determination of launch condition requirements for measuring multimode attenuation
GSO IEC TR 62614-2:2021 Fibre optics - Multimode launch conditions - Part 2: Determination of launch condition requirements for measuring multimode attenuation
GSO ISO 8178-4:2013 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Steady-state test cycles for different engine applications
SD 152-1987 Basic technical requirements for large and medium-sized hydro-generators

International Electrotechnical Commission (IEC)

IEC 62614-1:2020 Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation
IEC TR 62614-2:2015 Fibre optics - Multimode launch conditions - Part 2: Determination of launch condition requirements for measuring multimode attenuation

National Aeronautics and Space Administration (NASA)

NASA NACA-TN-646-1938 Wind-tunnel tests of a 2-engine airplane model as a preliminary study of flight conditions arising on the failure of one engine

German Institute for Standardization

DIN EN IEC 62614-1:2021-04 Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation (IEC 62614-1:2020); German version EN IEC 62614-1:2020 / Note: DIN EN 62614 (2011-04) remains valid alongside this standard until 202...
DIN EN IEC 62614-1 E:2019-12 Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation

PL-PKN

PN-EN IEC 62614-1-2021-03 E Fibre optics--Multimode launch conditions--Part 1: Launch condition requirements for measuring multimode attenuation (IEC 62614-1:2020)

SAE - SAE International

SAE AIR5683A-2016 High Performance 1553 Research and Development
SAE PT-94-2003 Homogeneous Charge of Compression Ignition (HCCI) Engines: Key Research and Development Issues

Society of Automotive Engineers (SAE)

SAE AIR5683-2011 High Performance 1553 Research and Development
SAE ARINC431-2010 NO FAULT FOUND - A CASE STUDY

IAEA - International Atomic Energy Agency

NS-G-4.4-2008 Operational Limits and Conditions and Operating Procedures for Research Reactors

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T P.570-2018 Artificial noise fields under laboratory conditions (Study Group 12)
ITU-T J.1002-2013 Pairing protocol specification for renewable conditional access system (Study Group 9)

AGMA - American Gear Manufacturers Association

2000FTM10-2000 Bending Fatigue Investigation under Variable Load Conditions on Case Carburized Gears

GOST

GOST R 59941-2021 Fermented fruit materials. General specifications
GOST 34428-2018 Photoluminescent evacuation systems. General specifications

American Welding Society (AWS)

WRC 517:2006 Examination of Mechanical Properties And Corrosion of High Temperature Alloys after Long Term Service under Advanced Power Plant Boiler Conditions - The Eddystone Studies

Indonesia Standards

SNI 4800-2011 Spesifikasi aspal cair tipe penguapan cepat

AT-ON

ONORM M 9032-3-1998 Machine tools - Acceptance conditions for surface grinding machines with double column (portal-type machines)

International Organization for Standardization (ISO)

ISO 22096:2007 Condition monitoring and diagnostics of machines - Acoustic emission

European Telecommunications Standards Institute (ETSI)

ETSI TR 103717 V 1.1.1-2021 SmartM2M - Study for oneM2M - Discovery and Query specification development

Association Francaise de Normalisation

NF A36-340:1996 Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions.
NF S86-306:2003 Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits.

Japanese Industrial Standards Committee (JISC)

JIS B 6251:2004 Machine tools -- Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table -- Testing of the accuracy
JIS H 1183 AMD 1:2012 Method for emission spectrochemical analysis of silver bullion (Amendment 1)

Aeronautical Radio Inc.

ARINC 431 BOOK-1996 No Fault Found - A Case Study
ARINC 431-1996 No Fault Found - A Case Study

GOSTR

GOST 16264.0-2018 Small power electric machines. Motors. General specifications

US-CFR-file

CFR 46-308.406-2014 Shipping. Part308:War risk insurance. Section308.406:Issuance of policies; terms and conditions.