hb/z

hb/z, Total:484 items.

The international standard classification for "hb/z" includes: Metallic coatings , Fasteners for aerospace construction , Chemical analysis of metals , Non-destructive testing of metals , Materials for aerospace construction , Steels , Aluminium , Manufacturing forming processes , Coatings and related processes used in aerospace industry , Paint coating processes , Glass , Surface treatment and coating , Aluminium products , Radiographic films .

The Chinese standard classification for "hb/z" includes: Material Protection , Standardization and quality management , Basic standards and general methods , Cold processing technology , Fasteners , Light metals and their alloys analysis method , Casting , Metal nondestructive testing method , Tools , Metal casting and forging materials used for aviation and aerospace , Cutters , Hot processing technology , Heat treatment , Hydraulic and pneumatic systems and their accessories , Basic standards for aviation and aerospace materials , Engine auxiliary system and its accessories , Composite materials and solid fuels , Moulds , Engine , Fuel system and its accessories , Coupling, brake and speed variator , Special glass , Basic standards and general methods , Special equipment for spacecraft manufacturing , Pipe fittings, clamps and seals , Electrical system and equipment , Air transport and ground equipment in general , General aviation , Technical management , Aircraft and its accessories in general , Welding and cutting , Light metals and their alloys , Nonmetallic materials used for aviation and aerospace , Elastic elements , Ambient conditions , Mechanical gadgets and components , General technical requirements , Navigation and communication system and equipment , Takeoff and landing devices , Photosensitive material , Cold processing technology , Special equipment for aircraft manufacturing .

Professional Standard - Aviation

HB/Z 186-1990 Flow turning
HB/Z 5005-2004 Painting process for aluminium alloys components
HB/Z 273.4-1995 Operation Guideline on the Cutting Processing - Chipping and Slotting
HB/Z 79-1995 Instructions for Nitrizing Process of Structural Steel and Stainless Steel for Aviation
HB/Z 223.17-2002 Aircraft Assembling Technology Anti-Loosing Technology for Thread Connection
HB/Z 5092.1-2001 Electroplating Black Chromium Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
HB/Z 223.8-2004 Aircraft assembling technology reveting of break mandrel revets
HB/Z 216-1992 Instructions for copper and copper alloys heat treatment process
HB/Z 281-1995 Guide for Analysis of Failure Mode, Effect and Hazardness of Aero-engine
HB/Z 5099.1-2000 Analysis Method for Electrosilvering Solution Determination of Silver Content in Electrosilvering Solution Through Potentiometric Titration
HB/Z 5073-1993 Electroinning Technology
HB/Z 5086.2-2000 Analysis Method for Cyaniding Electrocoppering Solution - Determination of Sodium Cyanide (Free)
HB/Z 202-1991 Design Guideline for layer plate limiter of aero-engine fuel oil and control system
HB/Z 300-1997 Design Guideline on Aircraft Hydraulic Power Conversion Device
HB/Z 63.3-2011 Preparation and application process of adhesive used in flexible joint of aircraft transparency.Part 2: J-189 adhesive
HB/Z 52-1993 K412 alloy electroslag remelting process manual
HB/Z 227.1-1992 Work Guidance on Airborne Equipment Manufacturing Process - General Provisions
HB/Z 103-1986 Aircraft Level Measurement Tolerance
HB/Z 210-1991 Low microstructure standard for turbojet engine turbine inner and outer shaft forgings
HB/Z 5088.6-1999 Analysis Method for Electronickelling Solution - Determination of Copper Content with Atomic Absorption Spectrometry Method
HB/Z 102-2000 Moisture Proofing，fungus Proofing and Salt Spray Proofing Coating Painting Process for Airborne Equipment
HB/Z 273.13-1995 Operation Guideline on the Cutting Processing - Scoring
HB/Z 296-1996 Guidance on Design and Manufacture of Plastic Injection Mold
HB/Z 5091.2-1999 Analysis Method for Chrome Plating Solution Determination of Dichromium Trioxide Content Through Potentiometric Titration
HB/Z 5019-2004 Casting technique of permanent alnico magnets
HB/Z 5076-1978 Aluminum and aluminum alloy anodizing process
HB/Z 350-2001 Resin transfer moulding (mould injecting) forming process of composite materials
HB/Z 5088.1-1999 Analysis Method for Electronickelling Solution - Determination of Nickel Sulfate and Magnesium Sulfate Content with EDTA Volumetric Method
HB/Z 5218.21-2004 Methods for chemical analysis of aluminium alloys-Part 21:Determination of beryllium content by beryllium Ⅱ spectrophotometric method
HB/Z 273.8-1995 Operation Guideline on the Cutting Processing - Grinding
HB/Z 5086.6-2000 Analytical method of cyanide electroplating copper solution Potentiometric titration determination of potassium sodium tartrate content
HB/Z 240-1993 Design and Manufacture of Cylindrical Spiral Compression Spring and Extension Spring of Piano Wires
HB/Z 267-1994 Preparation Guideline on the Manufacturing Order and Assembly Orders
HB/Z 155-1989 Recognized specifications for steel and high temperature alloy supplier's engineering for aviation
HB/Z 20025-2014 Process of skin stretch forming with flexible multi-point die
HB/Z 5089.3-2004 Methods for analysis of plating black nickel solutions-Part 3:Continual determination of nickel sulfate and zinc sulfate content by EDTA compleximetric method
HB/Z 292-1996 Aircraft Metal Conduit Manufacturing
HB/Z 337-1999 Analysis Method for Aluminum Alloy Chemical Conversion Solution (Alodine) - Determination of Alodine Content Through Oxidation Reduction Titration
HB/Z 5218.12-2004 Methods for chemical analysis of aluminium alloys-Part 12:Detetmination of nickel content by dimethylglyoxime extraction spectrophotometric method
HB/Z 5068-1992 Electrogalvanizing, electroplating cadmium process
HB/Z 355-2002 Principles procedures and requirements for aero-engines material purchase
HB/Z 352-2002 Stabilizing treatment for metallic parts of precise equipment & instrument for aviation
HB/Z 5083-2001 Reagents for analysis of metal plating and chemical overlay solutions
HB/Z 208-1991 Specification for sampling of test samples for spectroscopic analysis of nonferrous metal materials
HB/Z 298-1997 Design Guideline on Avionic Equipment of Civil Aircraft
HB/Z 5029-1995 Dry Air Storage Process of Aeroengine Equipment
HB/Z 20027.3-2014 Laser shock peening.Part 3: Aluminum alloy holes
HB/Z 5099.7-2000 Analysis Method for Silver Plating Solution - Determination of Iron and Copper Content in Silver Plating Solution with Atomic Absorption Spectrometry Method
HB/Z 20011-2011 Coin strengthening technology of holes and slots for aerial metal parts
HB/Z 176-1990 Design guidelines for oil return valves of aeroengine fuel and control systems
HB/Z 223.13-1998 Aircraft Assembly Process - Component Finish Machining
HB/Z 227.11-1992 Airborne Equipment Manufacturing Process Work Guidelines Process Discipline
HB/Z 220.3-1992 Aluminum Alloy Low Pressure Casting
HB/Z 256-1994 Design and Manufacture of Thin-wall Elastic Taper Lock
HB/Z 404-2013 Civil Aircraft Electrical Installation Design Guidelines
HB/Z 136-2000 Aeronautical structural steel heat treatment process
HB/Z 182-1990 State Machine Software Development Methodology
HB/Z 5218.15-2004 Methods for chemical analysis of aluminium alloys-Part 15:Determination of zirconium content by xylenol orange spectrophotometric method
HB/Z 214.1-1992 General principles of aviation product reliability growth
HB/Z 5087.5-2004 Methods for analysis of acid plating copper solutions part 5:Determination of nickel sulfate content by atomic absorption spectrometric method
HB/Z 5084-1978 Analytical method of cyanide electroplating zinc solution
HB/Z 233.13-1998 Aircraft Assembly Process - Component Finish Machining
HB/Z 226-1992 Print Inspection Requirements for Aviation Mold Line
HB/Z 316-1998 Neutral Salt Bath for Heating in Heat Treatment
HB/Z 227.3-1992 Work Guidance on Airborne Equipment Manufacturing Process - Process Review of Product Design
HB/Z 5091.3-1999 Analysis Method for Chrome Plating Solution Determination of Sulphide Acidic Content
HB/Z 260-1994 The Design and Manufacture of High Strength Plaster Mould
HB/Z 5100-1978 Analytical method of cyanide electroplating gold solution
HB/Z 231-1993 Maintainability Design Criteria for Conveyer
HB/Z 131-2004 Technical requirement for the selection of raw material of cast superalloys
HB/Z 200-1991 Design Guideline for rotary-vane type fuel pump of aero-engine fuel oil and control system
HB/Z 5015-1994 Instructions on Heat Treatment Process of Electromagnetic Pure Iron
HB/Z 5087.1-2004 Methods for analysis of acid plating copper solutions
HB/Z 5086.4-2000 Analysis Method for Cyaniding Electrocoppering Solution - Determination of Sodium Carbonate Content Through Potentiometric Titration
HB/Z 20010-2011 Process and quality inspection for Sn-Bi alloy plating
HB/Z 233.14-1998 Aircraft Assembly Process - Appearance Test of Component
HB/Z 56-1993 K417 Alloy Refusion Process Specification
HB/Z 132.3-1989 Regulations on Manufacturability Examination of Product Drawings in Guidelines for Manufacturing Processes of Aeroengines
HB/Z 223.7-2003 Aircraft Assemaling Technology Part 7: Riveting for Swaged Collar Type Rivet
HB 2390-1977 Thread rolling plate for HB 241-75, HB 242-70 thread d=2~6mm t=0.35~2mm
HB/Z 273.6-1995 Operation Guideline on the Cutting Processing - Boring
HB/Z 120-2011 TIG technology and quality test of titanium alloys
HB/Z 247-1993 No dimension drawing
HB/Z 315-1998 Vacuum Electron Beam Welding Process for High Temperature Alloy and Stainless Steel
HB/Z 286.6-1996 Guide for Design and Implementation of Monitoring System for Aviation Gas Turbine Engine - Temperature Monitoring
HB/Z 20006-2011 Roller impact strengthening technology for aluminum alloy parts in aircraft
HB/Z 357-2004 Heat treatment of structure steel casting for aviation
HB/Z 5010-1974 Manufacturing Technology of Low Pressure Formed Glass Fiber Reinforced Plastic Aeronautical Parts
HB/Z 273.5-1995 Machining Operation Guide Drilling
HB/Z 5218.8-2004 Methods for chemical analysis of aluminium alloys-Part 8:Determinition of titanium content by diantipyryl methane spectrophotometric method
HB/Z 261-2014 Guide for drafting EMC test report
HB/Z 20002-2011 Guideline of configuration management requirements for aviation products
HB/Z 179-1990 Basic requirements for software maintenance
HB/Z 5095.3-2004 Methods for analysis of cyaniding plating brass solutions -- Part 3: Determination of sodium carbonate content by potentiometric titrimetric method
HB/Z 5068-1978 Electrogalvanizing, electroplating cadmium process
HB/Z 269-1995 Guideline on the Selection of Lathe Dog
HB/Z 20027.4-2014 Laser shock peening.Part 4: Titanium weld joint
HB/Z 415-2014 General guidelines for airborne electronic equipment of civil aircraft
HB/Z 5107.1-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 1: Determination of sodium fluoride content in sodium fluoride oxidation solution by EDTA volumetric method
HB/Z 5085.1-1999 Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Cadmium Oxide Content with EDTA Volumetric Method
HB/Z 205-1991 Specification for sampling of specimens for chemical analysis of steels and superalloys
HB/Z 5084.4-2000 Analytical method of cyanide electroplating zinc solution for determination of sodium sulfide by potentiometric titration
HB/Z 291-1996 Grinding and Honing of Aircraft Parts
HB/Z 286.2-1996 Guide for Design and Implementation of Monitoring System for Aviation Gas Turbine Engine - Performance Monitoring
HB/Z 17-1992 Selection and Drawing Guideline on Plastic Compression Mold
HB/Z 5105.1-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
HB/Z 20019-2014 Process for riveting for titanium alloy rivet
HB/Z 5099.3-2000 Analysis Method for Electrosilvering Solution - Determination of Potassii Content in Electrosilvering Solution Through Potentiometric Titration
HB/Z 303-1997 Identification Requirements for Special Process
HB/Z 157-1990 Recognized specifications for civil metal materials by supplier
HB/Z 414-2014 General guidance for civil aircraft electrical power management
HB/Z 103-2023 Leveling check tolerance of aireraft
HB/Z 5105.2-2000 Analysis Method for ElectroChemical Polishing Solution - Determination of Chromic Oxide Content Through Potentiometric Titration
HB/Z 5218.19-2004 Methods for chemical analysis of aluminium alloys-Part 19:Determination of chromium content by diphenylcarvazide spectrophotometric method
HB/Z 199-2005 Forging techniques of titanium alloy
HB/Z 412-2013 Chemical Milling Technology of Titanium Alloy Parts
HB/Z 5017-1996 Moulding Process of Thermosetting Plastic Products
HB/Z 20009-2011 Implementation guideline for General requirements of aviation product data management
HB/Z 220.2-1992 Aluminum Alloy Metal Mold Casting
HB/Z 72-1995 Magnetic Particle Inspection
HB/Z 99.8-1987 Working Rules for Aircraft Production Finalization
HB/Z 5069-1978 Electroplating Copper Process
HB/Z 336-1999 Analysis Method for Load of Aircrafts Entraining System
HB/Z 335-1999 Coating Process of Molybdenum Disulfide Dry Film Lubricant on Fastening Piece
HB/Z 5088.4-1999 Analysis Method for Electronickelling Solution Determination of Boric Acid Content Through Potentiometric Titration
HB/Z 50-1993 Instructions on K412 Alloy Remelting Process
HB/Z 5093.7-2000 Analysis Method for Alkaline Electrotinning Solution - Determination of Copper Content with Atomic Absorption Spectrometry Method
HB/Z 55-1993 K417 Alloy Smelting Process Specification
HB/Z 346-2002 Process and inspection of repair welding for investment castings of steel
HB/Z 5107.13-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 13: Determination of potassium bichromate、sodium bichromate content by ferrous titrimetric method
HB/Z 195-1991 General Guidelines for Ada-based Programming Languages (Ada PDL)
HB/Z 72-1983 Aviation Parts Magnetic Particle Inspection Instructions
HB/Z 5085.5-1999 Analysis Method for Cyaniding Cadmium Electroplating Solution - the Determination Ofnickel Sulfate Content with EDTA Volumetric Method
HB/Z 5107.7-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 7: Determination of glacial acetic acid content in glacial acetic acid oxidation solution by potentiometric method
HB/Z 5091.1-1999 Analysis Method for Chrome Plating Solution Determination of Chromium Trioxide Content Through Potentiometric Titration
HB/Z 5087.4-2004 Methods for analysis of acid plating copper solutions part 4:Determination of iron content by atomic absorption spectrometric method
HB/Z 72-1998 Magnetic Particle Inspection
HB/Z 45-1993 Instructions on K406 Alloy Smelting Process
HB/Z 5020-1997 Heat Treatment for Casting of Aluminum Nickel and Cobalt Permanent Magnetic Alloys
HB/Z 262-1994 Specifications on the Sampling of Metal Heat Treatment Salt Bath for Chemical Analysis
HB/Z 223.12-1997 Aircraft Assembly Process - Holing
HB/Z 273.11-1995 Operation Guideline on the Cutting Processing - Digital Control Processing
HB/Z 288-1996 Design Guideline on the Equivalent Test Run Specifications for the Acceleration of Aero-engine Plunger Type Fuel Pump
HB/Z 223.5-1993 Aircraft Assembly Process - Sealing Riveting of Coating Sealant
HB/Z 306-1997 Forming Process Combination of Composite Material
HB/Z 122-1987 Rules for Dimension Change of O-shaped Rubber Sealing Ring in Aging Oil
HB/Z 5085.4-1999 Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Sodium Carbonate Content Through Potentiometric Titration
HB/Z 237-1993 Rigid Anodizing Process for Aluminium and Aluminium Alloy
HB/Z 282-1996 Bonding Process for the Reinforcement Materials on the Edge of Clear Parts of Aircrafts
HB/Z 223.3-2003 Aircraft assembling technology Part 3: Conventional riveting
HB/Z 5069-2011 Process and quality inspection for electroplated copper coatings
HB/Z 261-1994 Requirements for making test report on electromagnetic compatibility
HB/Z 20012-2011 Fillet rolling process of bolt
HB/Z 317-1998 Injection Molding Process of Thermosetting Plastic Products
HB/Z 5107.8-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 8: Determination of ammonia sulfate content in glacial acetic acid oxidation solution by barium sulfate gravimetric method
HB/Z 20001-2011 NC milling process of titanium alloy monolithic components for aircraft
HB/Z 5107.5-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 5: Determination of glacial acetic acid content in aluminum potassium sulfate oxidation solution by potentiometric method
HB/Z 5218.9-2004 Methods for chemical analysis of aluminium alloys-Part 9:Determination of zinc content by tri-n-octylamine extraction EDTA volumetric method
HB/Z 5108.1-1999 Analysis Method of Phosphating Solution - Determination of Free Acidity and Total Acidity Through Potentiometric Titration
HB/Z 5218.11-2004 Methods for chemical analysis of aluminium alloys-Part 11:Determination of nickel content by dim,ethylglyoxime separation-EDTA volumetric method
HB/Z 223.20-2002 Aircraft Assembling Technology Conduct Installation
HB/Z 348-2001 Repair welding process and inspection for titanium and titanium alloy casting
HB/Z 5105.3-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Sulfuric Acid and Phosphoric Acid
HB/Z 328-1998 Repair Welding Process of Magnesium Alloy Castings and Inspection
HB/Z 20004-2011 Assembly technology of fiber reinforced metal laminates structure
HB/Z 5084.2-2000 Analysis Method for Cyaniding Electrogalvanizing Solution - Determination of Sodium Hydroxide Content Through Potentiometric Titration
HB/Z 5082-1978 Copper and Copper Alloy Oxidation Process
HB/Z 132.5-1989 Guidelines for Manufacturing Processes of Aeroengines Product Process Division, Process Layout, and Material Quota Management Regulations
HB/Z 409-2013 Machining Technology of Resin Matrix Composite Parts
HB/Z 238-1993 Technology for Resistance Spot Welding and Seam Welding of High Temperature Alloy
HB/Z 5094.3-2004 Methods for analysis of acid plating tin solutions -- Part 3: Determination of lead content by atomic absorption spectrometric method
HB/Z 5089.5-2004 Methods for analysis of plating black nickel solutions-Part 5:Determination of ammonium thiocyanate content by potentiometric titrimetric method
HB 6938-1994 Excentric-back Cutter for Double-gear Bulb End-milling Cutter Used for HB 6929-94 and HB 6932-94 D=56~63mm
HB/Z 321-1998 Design Guideline on the Lift Device of Aircrafts
HB/Z 410-2013 Repair Technology of Resin Matrix Composite Parts
HB/Z 20017-2012 Process for laser welding of titanium and titanium alloys
HB/Z 165-1990 Recognized specifications for forging production process for civil aircraft
HB/Z 5107.17-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 17: Determination of nitric acid content in nitric acid oxidation solution by potentiometric method
HB/Z 339.2-1999 Analysis Method for Aluminum Alloy Chromic Acid Anodizing Solution - Determination of Chloridion Content Through Potentiometric Titration
HB/Z 215-1992 Equivalent values of hardness and strength of aluminum alloy plate materials
HB/Z 5218.10-2004 Methods for chemical analysis of aluminium alloys-Part 10:Determination of zine content by dithizone extraction separation-polarographic method
HB/Z 5104.1-1999 Analysis Method for Aluminum Alloy Sulphide Acid Anodizing Solution Determination of Free and Combined Sulfuric Acid Content Through Potentiometric Titration
HB/Z 147-1989 Unit of measurement conversion rules
HB/Z 5070-1992 Electronickelling Process
HB/Z 223.18-2002 Aircraft Assembling Technology Dimpling and Countersinking
HB/Z 5218.5-2004 Methods for chemical analysis of aluminium alloys-Part 5:Determination of silicon content by gravimetric method
HB/Z 5085.6-1999 Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Sodium Sulfate Content Through Volumetric Precipitation Method
HB/Z 199-1991 Titanium alloy forging process
HB/Z 343-2001 Heat treatment of controllable nitrogenous base protection atmosphere
HB/Z 223.4-2004 Aircraft assembling technology Reveting of interfere fitting for half crown rivets and conhead rivets
HB/Z 5085.8-1999 Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Copper Content Through Atomic Absorption Spectrometry Method
HB/Z 96-1985 Criteria for the Design and Arrangement of Airborne Antenna Subsystem
HB/Z 5107.10-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 10: Continual determination of manganese sulfate and magnesium sulfate content in sodium bichromate and magnesium sulfate oxidatioin solution by EDTA volumetric method
HB/Z 290-1996 Design Manual for Aircraft Cabin Transparency
HB/Z 5107.12-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 12: Determination of potassium bichromate content in potassium bichromate and magnesium sulfate oxidation solution by potentiometric method
HB/Z 20073-2018 Quality and inspection requirements for vacuum brazed joints
HB/Z 5110.1-2000 Aanalysis Method of ElectroChemical Degreasing and Chemical Degreasing Solution - Determination of Total Alkalinity Through Potentiometric Titration
HB/Z 345-2002 Process and inspection of repair welding for aluminium alloy castings
HB/Z 5107.3-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 3: Determination of potassium bichromate content in aluminum potassium sulfate oxidation solution by potentiometric method
HB/Z 5086.5-2000 Analysis method of cyanide electroplating copper solution Titration analysis method to determine the content of sodium cyanide (free), sodium cyanide and sodium carbonate
HB/Z 80-1997 Instructions on Heat Treatment of Stainless Steel and Heat Resistant Steel for Aviation
HB/Z 318-1998 Specification for stress relief before plating and hydrogen removal after plating
HB/Z 5079-1996 Chemical Oxidation Technology of Steel Parts
HB/Z 5093.6-2000 Analytical method of alkaline electroplating tin solution Determination of lead content by atomic absorption spectrometry
HB/Z 5107.11-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 11: Determination of sodium bichromate content in sodium bichromate and magnesium sulfate oxidation solution by potentiometric method
HB/Z 5087.6-2004 Methods for analysis of acid plating copper solutions part 6:Determination of arsenic content by spectrophotometric method
HB/Z 77-1984 Test method for cold bending properties of metal materials
HB/Z 85-1984 Rules for Trial Production and Finalization of Castings
HB/Z 314-1998 Electrolytic Machining of Titanium Alloy
HB/Z 227.8-1992 Work Guidance on Airborne Equipment Manufacturing Process - Selection, Ordering and Design of Process Equipment
HB/Z 249-1993 Requirements for the manufacture and installation of aircraft assembly process equipment
HB/Z 227.12-1992 Airborne Equipment Manufacturing Process Work Guidelines Product Process Appraisal
HB/Z 5088.2-1999 Analysis Method for Nickel Plating Solution Determination of Sodium Sulfate Content Through Precipitation Titration
HB/Z 403-2013 Selection and Application Guidelines for Electrical Overcurrent Protection Devices
HB/Z 252-1994 Reasonable Dimension Marking of Parts
HB/Z 5106-1978 Analysis method of aluminum alloy chemical oxidation (phosphoric acid-chromic acid method) solution
HB/Z 192-2008 Heat treatment of soft magnetic alloys
HB/Z 5096.1-2004 Methods for analysis of plating lead solutions -- Part 1: Determination of lead oxide content by EDTA volumetric method
HB/Z 222-1992 Numbering Method for Process Document
HB/Z 241-1993 Carbon fiber composite material aircraft skin antistatic polyurethane enamel painting process
HB/Z 132.9-1989 Guidelines for the manufacturing process of aero-engines Process scientific research and test work management regulations
HB/Z 188-1991 Standard catalogue for materials selectable for civil aircraft
HB/Z 4-1995 Requirements for the Design of O-type Seal Ring and Seal Structure
HB/Z 206-1991 Specification for sampling of specimens for spectroscopic analysis of steel and superalloys
HB/Z 5087.2-2004 Methods for analysis of acid plating copper solutions part 2:Determination of copper sulfate content by potentiometric titrimetric method
HB/Z 5099.8-2000 Analysis Method for Silver Plating Solution - Determination of Stibium Content in Silver Plating Solution with Atomic Absorption Spectrometry Method
HB/Z 338.1-1999 Analysis Method for Aluminum Alloy Isolation Anodic Oxidation Solution - Determination of Oxalic Acid Content Through Oxidation Reduction Titration
HB/Z 258-1994 Application Legend for the General Parts of Clamps
HB/Z 70-1993 K419 Alloy Refusion Process Specification
HB/Z 5107.15-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 15: Continual determination of manganese sulfate and magnesium sulfate content in potassium bichromate and magnesium sulfate oxidation solution by EDTA volumetric method
HB/Z 5089.4-2004 Methods for analysis of plating black nickel solutions-Part 4:Determination of sodium sulfate content by precipitation titrimetric method
HB/Z 421-2014 Assurance guidance for software in airborne systems and equipment certification for civil aircraft
HB/Z 78-1984 Structural steel and stainless steel resistance spot welding and seam welding process
HB/Z 5072-1978 Electrochrome plating process
HB/Z 5095.1-2004 Methods for analysis of cyaniding plating brass solutions -- Part 1: Continual determination of copper (II) cyanate and zinc oxide content by EDTA volumetric method
HB/Z 227.6-1992 Work Guidance on Airborne Equipment Manufacturing Process - Preparation of Process Specification
HB/Z 5218.17-2004 Methods for chemical analysis of aluminium alloys-Part 17:Determination oflead content by polarographic method
HB/Z 311-1998 Guideline on Determination of Flight Thrust
HB/Z 5088.5-1999 Analysis Method for Nickel Plating Solution Determination of Ferrous Content Through Atomic Absorption Spectrometry
HB/Z 299-1997 Aviation product quality audit
HB/Z 308-1997 The Outline and Approval Procedure of New Material Test for Civil Aircrafts
HB/Z 5099.4-2000 Analysis Method for Silver Plating Solution Determination of Potassium Carbonate Content in Hard Silver Solution Through Potentiometric Titration
HB/Z 420-2014 Assurance guidance for civil aircraft electronic hardware certification
HB/Z 5109.1-2001 Analysis method for passivation solution Determination of sodium bichromate content in zinc plating, cadmium plating diacid passivation solution through potentiometric titration
HB/Z 408-2013 Internal pressure push-bending forming process of aluminum alloy tube with small bending radius
HB/Z 242-1993 Acceptance Specifications on Mesograin/medium Speed Industtrial X-ray Film
HB/Z 5072-1992 Chromium Electroplating Process
HB/Z 20018-2012 Chemical cleaning process for aluminum alloys before laser welding
HB/Z 5084.1-2000 Analysis Method for Cyaniding Electrogalvanizing Solution - Continuous Determination of Sodium Cyanide and Zinc Oxide Content Through Complexometric Titration
HB/Z 244-1993 Software Support Environment
HB/Z 5107.4-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 4: Determination of aluminum potassium sulfate content in aluminum potassium sulfate oxidation solution by EDTA volumetric method
HB/Z 204-1991 Acceptance control procedure for metal materials used in aircraft
HB/Z 42-1993 Instructions on K403 Alloy Remelting Process
HB/Z 46-1993 Instructions on K 406 Alloy Remelting Process
HB/Z 220.6-1992 Precise Casting for Aluminum Alloy Gypsum Mold
HB/Z 312-1998 Guideline on the Installation and Design of Aircrafts Gas Turbine Auxiliary Power Device
HB/Z 170-2005 Cold expansion process for hole of aircraft metal part
HB/Z 286.1-1996 Guide for Design and Implementation of Monitoring System for Aviation Gas Turbine Engine - General
HB/Z 213-1992 Guidelines for Environmental Stress Screening of Airborne Electronic Equipment
HB/Z 5087-1978 Methods for analysis of acid copper electroplating solutions
HB/Z 322-1998 Design Guideline on Composite Material Structure of Military Aircraft
HB/Z 5107.16-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 16: Determination of potassium bichromite content in nitric acid oxidation solution by potentiometric method
HB/Z 5084.5-2000 Analysis Method for Cyaniding Electrogalvanizing Solution - Determination of Iron Content with Atomic Absorption Spectrometry Method
HB/Z 20027.1-2014 Laser shock peening.Part 1: Titanium blades
HB/Z 5094.4-2004 Methods for analysis of acid plating tin solutions -- Part 4: Determination of copper content by atomic absorption spectrometric method
HB/Z 201-1991 Design Guideline for thes ynchro moter of Aero-engine fuel oil and control system
HB/Z 26-1992 General Instructions on Aviation Parts Shot Peening Strengthening Process
HB/Z 178-1990 Basic requirements for software acceptance
HB/Z 190-2004 Injecting moulding technology for polyamide 1010 plastics
HB/Z 227.9-1992 Airborne Equipment Manufacturing Process Guidelines Ordering and Allocation of Non-standard Equipment and Outsourced Equipment
HB/Z 228-1993 Guide for Connection Process of Extruded Flaring-free Duct
HB/Z 189-1991 Carbon fibre composite member holing process
HB/Z 20008-2011 Guideline of overall application efficiency and evaluating of NC equipment
HB/Z 5093.3-2000 Analysis Method for Alkaline Electrotinning Solution - Determination of Sodium Acetate Content Through Potentiometric Titration
HB/Z 407.1-2013 Aluminum Alloy Parts Press-bending and Shaping Technology Part 1: Panel Parts
HB/Z 5071-2004 Process and quality inspection for electroless nickel plating
HB/Z 132.2-1989 Guidelines for aero-engine manufacturing process work Regulations for the management of new aircraft development process work
HB/Z 5110.4-2000 Aanalysis Method of ElectroChemical Degreasing and Chemical Degreasing Solution - Determination of Trisodium Phosphate Content with EDTA Volumetric Method
HB/Z 132.1-1988 Guideline on Aero-engine Manufacturing Process - Working Regulations for the Process Technology
HB/Z 63.2-2011 Preparation and application process of adhesive used in flexible joint of aircraft transparency.Part 2:SY-50s adhesive
HB/Z 223.15-2002 Aircraft Assembling Technology Check and Acceptance Inspection for Solid Rivet after Riveting
HB/Z 402-2013 Design guidelines for integrated modular avionics systems for civil aircraft
HB/Z 223.19-2002 Aircraft assembling technology assembling and test for landing gear
HB/Z 344-2001 Titanium alloy pickling process and quality inspection
HB/Z 132.8-1989 Guidelines for Manufacturing Processes of Aeroengines Process Work Regulations in Production Finalization
HB/Z 221-1992 Preparation and Management of Enterprise Standard System Table
HB/Z 5107.18-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 18: Determination of ammonium chloride (sodium chloride) content in nitric acid oxidation solution by potentiometric method
HB/Z 359-2005 Reference photograghs of indication for fluorescent penetrant testing
HB/Z 5093.5-2000 Analysis Method for Alkaline Electrotinning Solution - Qualitative Analysis of Divalent Stannum with Redox Process
HB/Z 293-1996 Guideline on the Electricity Application and Transient Protection of Civil Aircrafts
HB/Z 61-1998 Penetrant Inspection
HB/Z 274-1995 Excessive Humidity Control During the Cooling of Airborne Electronics
HB/Z 20014-2012 Process for laser welding of aluminum alloys
HB/Z 232-1993 Guidelines for review of manufacturing methods for civil aviation products
HB/Z 227.5-1992 Work Guidance on Airborne Equipment Manufacturing Process - Design of Process Program
HB/Z 5218.18-2004 Methods for chemical analysis of aluminium alloys-Part 18:Determination of chromium content by ammonium ferrous sulfate volumetric method
HB/Z 324-1998 Design of the Weight and Balance of Transport Aircrafts
HB/Z 236-1993 Electroplating Terne Metal Process
HB/Z 239-1993 Instructions on Heat Treatment Process of Expansion Alloy
HB/Z 20021-2014 Brazing process and quality inspection for titanium and titanium alloys
HB/Z 5006-1974 Instructions for painting process of aircraft magnesium alloy parts
HB/Z 5218.22-2004 Methods for chemical analysis of aluminium alloys-Part 22:Determination of boron content by carmine spectrophotometric method
HB/Z 48-1993 K211 alloy non-vacuum remelting process manual
HB/Z 219-1992 Delivery Acceptance Control Procedure of Nonmetallic Material for Aircrafts
HB/Z 341-2000 Molding of Composite Material - Clipping and Paving Process
HB/Z 5107.2-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 2: Determination of sodium fluoride content in sodium fluoride oxidation solution by depositive titrimetric method
HB/Z 80-2011 Heat treatment of stainless steel for aviation
HB/Z 5218.3-2004 Methods for chemical analysis of aluminium alloys-Part 3：Determination of iron content by o-phenanthroline spectrophotometric method
HB/Z 54-1993 K214 alloy remelting process manual
HB/Z 172-1990 Calculation stiffness of frame flat plate and standard plate
HB/Z 5093.1-2000 Analysis Method for Alkaline Electrotinning Solution - Determination of Sodium Stannate Content with EDTA Volumetric Method
HB/Z 44-1993 Instructions on K405 Alloy Remelting Process
HB/Z 5093.4-2000 Analysis Method for Alkaline Electrotinning Solution - Determination of Divalent Stannum Content with Oxidation Reduction Titration Method
HB/Z 7-1993 Cold-punching Mould Simplified Plotting Format
HB/Z 235-1993 Process Specifications on Fluorine, Silicon Rubber Metal Moulded Products
HB/Z 278-1995 Management and Design Guideline on the Anti-interference of Electromagnetic Radiation for Air Launching Weapons System
HB/Z 5091.5-1999 Analysis Method for Chrome Plating Solution Determination of Ferrous Content Through Atomic Absorption Spectrometry
HB/Z 5089.2-2004 Methods for analysis of plating black nickel solutions-Part 2:Continual determination of nickel sulfate and zinc sulfate content by magnesium sulfate back titrimetric EDTA volumetric method
HB/Z 5084.3-2000 Analysis Method for Cyaniding Electrogalvanizing Solution - Determination of Sodium Carbonate Content Through Potentiometric Titration
HB/Z 20023-2014 Process for plasma nitriding and plasma nitrocarburizing on steel parts for aviation
HB/Z 5218.2-2004 Methods for chemical analysis of aluminium alloys-Part 2：Detemination of copper content by iodimetric method
HB/Z 223.1-1992 Aircraft assembling technology Reveting of interfere fitting for half crown rivets and conhead rivets
HB/Z 227.4-1992 Work Guidance on Airborne Equipment Manufacturing Process - Preparation of Process Documents
HB/Z 196-1991 Leading use of life extension procedures and methods for airborne equipment of civil aircraft
HB/Z 5107.6-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 6: Determination of potassium bichromate content in glacial acetic acid oxidation solution by potentiometric method
HB/Z 20007-2011 Implementing guide of the general requirements for digital pre-assembly (DPA) of airplane
HB/Z 5218.23-2004 Methods for chemical analysis of aluminium alloys-Part 23:Determination of vanadium content by N-benzoyl-N-phenylhydroxylamine extraction spetrophotometric method
HB/Z 185-1990 Design guideline for lightning protection and overlapping of civil aircraft
HB/Z 273.12-1995 Operation Guideline on the Cutting Processing - Feeding
HB/Z 5092.3-2001 Analytical method of black chromium solution in electroplating Determination of boric acid content by potentiometric titration
HB/Z 234-1993 Technology for Hot Isostatic Pressing of Titanium Alloy Casting
HB/Z 132.6-1989 Guidelines for the manufacturing process of aero-engines Selection, manufacture and design of process equipment Regulations
HB/Z 339.1-1999 Analysis Method for Aluminum Alloy Chromic Acid Anodic Oxidation Solution - Determination of Free Chromium Trioxide and Total Chromium Trioxide Content Through Potentiometric Titration
HB/Z 5077-1978 Aluminum and aluminum alloy chemical oxidation (phosphoric acid-chromic acid method) process
HB/Z 5080-1996 Phosphonation Technology of Steel Parts
HB/Z 168-1990 Guideline for preparation of civil aviation product quality control procedure
HB/Z 20027.2-2014 Laser shock peening.Part 2: Titanium blisk
HB/Z 360-2008 Application guidance for avionics application software interface
HB/Z 356-2002 Insulation treatment for aeronautical electromechanical equipments
HB/Z 5087.7-2004 Methods for analysis of acid plating copper solutions part 7:Determination of antimony content by atomic absorption spectrometric method
HB/Z 5089.1-2004 Methods for analysis of plating black nickel solutions
HB/Z 5218.1-2004 Methods for chemical analysis of aluminium alloys-Part 1:Determination of copper content by BCO spectrophotometric method
HB/Z 273.2-1995 Operation Guideline on the Cutting Processing - Turning
HB/Z 263-1994 Manufacturing Process of Powder Metallurgy Magnetically Soft Material Products
HB/Z 5076-1993 Insulation Anodic Oxidation Technology of Aluminium and Aluminium Alloy
HB/Z 230-1993 Reliability Design Criteria for Transport Aircraft Systems
HB/Z 211-1992 Military Aircraft Systems Work Breakdown Structure
HB/Z 225-1992 Rubber Pressure Mold Standard Mold Base and Standard Accessories - Application Guide
HB/Z 223.21-2003 Aircraft assembling technology Part 21: Composites materials riveting
HB/Z 286.7-1996 Guidelines for Design and Implementation of Aviation Gas Turbine Engine Surveillance Systems Integrated Design of Surveillance Systems and Airborne Systems
HB/Z 259-1994 Diameter and Deviation for Interference Thread Bottom Hole
HB/Z 411-2013 Assembly Technology of Resin Matrix Composite Parts
HB/Z 5125-2008 Process of chemical milling for aluminum alloys in alkali solution
HB/Z 347-2002 Process and quality inspection for titanium and titanium alloy anodizing
HB/Z 223.9-1997 Aircraft Assembly Process - Weight Balance of Control Plane
HB/Z 20003-2011 Heat treatment of castings of stainless steel and heat-resistant steel for aviation
HB/Z 5010-1994 Manufacturing Process for Low-pressure Formed Glass Fiber Reinforced Plastic Aviation Workpiece
HB/Z 194-1991 Aircraft Safety Electrical Grounding Requirements
HB/Z 358-2005 Heat treatment for spring parts of steel for aviation
HB/Z 5094.1-2004 Methods for analysis of acid plating tin solutions -- Part 1: Determination of tin (II) sulfate content by potentiometric titrimetric method
HB/Z 5093.2-2000 Analytical method of alkaline electroplating tin solution Potentiometric titration to determine the content of sodium hydroxide
HB/Z 223.6-1996 Aircraft assembly process high lock bolt installation
HB/Z 5089.6-2004 Methods for analysis of plating black nickel solutions-Part 6:Determination of boric acid content by potentiometric titrimetric method
HB/Z 5091.4-1999 Analysis Method for Chrome Plating Solution Qualitative Analysis of NO2-
HB/Z 5107.9-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 9: Determination of chlorine content in glacial acetic acid oxidation solution by potentiometric method
HB/Z 401-2013 Environmental design guidelines for packaging and interfacing of integrated modular avionics systems for civil aircraft
HB/Z 119-2011 Fusion weld process and quality inspection for aluminium and aluminium alloys
HB/Z 63.1-2011 Preparation and application process of adhesive used in flexible joint of aircraft transparency.Part 1:Acrylic adhesive and modified acrylic adhesive
HB/Z 323-1998 Guideline on Analysis Technique for the Measurement Uncertainty of Flight Thrust
HB/Z 83-1984 Stainless steel pickling passivation treatment process
HB/Z 5104.2-1999 Analysis Method for Aluminum Alloy Sulphide Acid Anodizing Solution - Determination of Aluminum Content Through Potentiometric Titration
HB/Z 101-1985 Calculated Rigidity for Common Framework of Intersection Point Guage
HB/Z 313-1998 Design and Installation Requirements for Airentrainment System of Aircraft Engine
HB/Z 20027.6-2014 Laser shock peening.Part 6: Stainless steel weld seam
HB/Z 5107.14-2004 Methods for analysis of chemical oxidation solution for magnesium alloy -- Part 14: Determination of ammonia sulfate content in potassium bichromate and magnesium sulfate oxidation by potentiometric method
HB/Z 407.2-2013 Aluminum Alloy Parts Press-bending and Shaping Technology Part 2: Profile Parts
HB/Z 217-1992 Instructions for time-related fatigue life prediction method for strain energy
HB/Z 276-1995 Heat Treatment of Wrought Aluminium Alloy Parts
HB/Z 5083-1978 Commonly used reagents for electroplating solution analysis
HB/Z 5086.8-2000 Analysis Method for Cyaniding Electrocoppering Solution - Determination of Silver Content with Atomic Absorption Spectrometry Method
HB/Z 289-1996 Design Manual on the Compatibility of Aircrafts/suspenders
HB/Z 191-1991 Instructions for aviation structural steel stainless steel vacuum heat treatment
HB/Z 5073-1978 Tin plating process
HB/Z 5090.1-2001 Analysis method for electroless nickel plating solution Determination of nickel sulfate (or nickel chloride) content through EDTA volume method
HB/Z 268-1995 The Design and Manufacture Guideline on the Blanking Die
HB/Z 5085-1978 Analysis method of cadmium solution in cyanide electroplating
HB/Z 20026-2014 Protection for sheet metal parts in manufacturing process
HB/Z 227.7-1992 Work Guidance on Airborne Equipment Manufacturing Process - Process Quota Preparation of Material Consumption
HB/Z 326-1998 Composite Material Compression Molding Process
HB/Z 141-1989 Structural elements of die forgings
HB/Z 132.7-1989 Aero-engine manufacturing process work guidelines Non-standard equipment request, standard equipment selection, deployment management regulations
HB/Z 214.2-1992 Aviation Product Reliability Growth Management
HB/Z 5087.3-2004 Methods for analysis of acid plating copper solutions part 3:Determination of sulphuric acid content by potentiometric titrimetric method
HB/Z 353-2002 Principles procedures and requirements for aero-engines material selection
HB/Z 5085.7-1999 Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Iron Content Through Atomic Absorption Spectrometry Method
HB/Z 275-1995 First Article Inspection of Civil Aviation Product
HB/Z 33-1998 Ultrasonic Inspection for Wrought SuperAlloy Bar
HB/Z 20027.5-2014 Laser shock peening.Part 5: Super-alloy parts
HB/Z 47-1993 K211 alloy non-vacuum smelting process manual
HB/Z 354-2002 Principles procedures and requirements for aero-engines material research and development
HB/Z 5218.13-2004 Methods for chemical analysis of aluminium alloys-Part 13:Determination of total rare earth contents by oxalate gravimetric method
HB/Z 20022-2014 Porcelain anodized process and quality inspection for aluminium and aluminium alloys
HB/Z 305-1997 Composite Material Autoclave Moulding Process
HB/Z 212-1991 Guidelines for Writing Statements of Work
HB/Z 5110.3-2000 Aanalysis Method of ElectroChemical Degreasing and Chemical Degreasing Solution Determination of Sodium Silicate
HB/Z 220.1-1992 Aluminum alloy sand casting
HB/Z 203-1991 Selection of airplane wobble bearing
HB/Z 218-1992 Terminology of cold process in aviation
HB/Z 5096.2-2004 Methods for analysis of plating lead solutions -- Part 2: Determination of free fluorboric acid content by potentiometric titrimetric method
HB 6919-1994 Slot milling cutter for six-tooth roughing end mill for HB 6906-94 HB 6909-94.D=55~75mm
HB/Z 319-1998 Typical Configuration Guide for Aircraft and Helicopter Power Supply Systems
HB/Z 53-1993 K214 alloy smelting process manual
HB 6925-1994 HB 6911~6912-94 HB 6914~6915-94.D=63~80mm for slot milling cutter for three-tooth rough machining end mill
HB/Z 20016-2012 Process for laser-arc hybrid welding of aluminum alloys
HB/Z 273.3-1995 Operation Guideline on the Cutting Processing - Milling
HB/Z 5099.5-2000 Analysis Method of Silver Plating Solution - Determination of Potassium Hydroxide Content in Silver Plating Solution Through Potentiometric Titration
HB/Z 273.14-1995 Operation Guideline on the Cutting Processing - Bench Worker
HB/Z 41-1993 Instructions on K 403 Alloy Smelting Process
HB/Z 5218.14-2004 Methods for chemical analysis of aluminium alloys-Part 14:Determination of the cerium subgroup of rare earth elements content by tribromoarsenazo spectrophtometric method
HB/Z 223.11-2003 Aircraft assembling technology Part 11: Riveting for threaded hollow rivet
HB/Z 280-1995 Guideline on the Radar Scattering Cross Section Test of Aerial Vehicles
HB/Z 227.10-1992 Aviation airborne equipment manufacturing process work guideline process scientific research test
HB/Z 38-1993 Instructions on K401 Alloy Smelting Process
HB/Z 5085.2-1999 Analysis Method for Cyaniding Cadmium Electroplating Solution - Determination of Sodium Cyanide Content Through Potentiometric Titration
HB/Z 5094.2-2004 Methods for analysis of acid plating tin solutions -- Part 2: Determination of free sulphuric acid content by potentiometric titrimetric method
HB/Z 171-1990 Intersection locator calculates stiffness
HB/Z 20013-2012 Design guidelines for aerodynamic configuration of UAV
HB/Z 20015-2012 Process for laser welding with filling wire of aluminum alloys
HB/Z 5017-1976 Molding process of thermosetting plastic products
HB 2386-1977 Thread rolling shaft for rolling HB 241-75, HB 242-70 thread rolling wheel d=36~45mm t=1.5~2mm
HB/Z 5070-1978 Nickel plating process
HB/Z 229-1993 Main Parameters and Technical Requirements for Vibration Stress Relief
HB/Z 5088-1978 Analytical method of electroplating nickel solution
HB/Z 342-2000 Injection Molding Process of ThermoPlastic Engineering Plastics Used for Aviation
HB/Z 5080-1978 Phosphating process of iron and steel parts
HB/Z 132.4-1989 Guidelines for aero-engine manufacturing process Work regulations for process document management
HB/Z 400-2013 Civil Aircraft Avionics Software Management Guidelines
HB/Z 60-1996 Radiographic inspection
HB/Z 5218.4-2004 Methods for chemical analysis of aluminium alloys-Part 4:Determination of manganese content by potassium periodate spetrophotometric method
HB/Z 61-1992 penetration testing
HB/Z 302-1997 Design Guideline on Power Supply System of Civil Aircraft
HB/Z 227.2-1992 Work Guidance on Airborne Equipment Manufacturing Process - Processing Procedure
HB/Z 273.10-1995 Operation Guideline on the Cutting Processing - Gear Processing
HB/Z 5099.2-2000 Analysis Method for Electrosilvering Solution - Determination of Potassium Cyanide Content in Electrosilvering Solution Through Potentiometric Titration
HB/Z 220.5-1992 Aluminum Alloy Investment Shell Mold Precision Casting
HB/Z 5091-1978 Analytical method of chrome plating solution
HB/Z 220.4-1992 Aluminum Alloy Pressure Casting
HB/Z 166-1990 Recognized specifications for production process of metal materials for civil aircraft
HB/Z 220.7-1992 Aluminum Alloy Casting Impregnation
HB/Z 162-1990 Manufacturing process of powder metallurgy copper base clutch friction plate
HB/Z 422-2014 Development and certification guidance of IMA for civil aircraft
HB/Z 304-1997 Manufacturing Process of Composite Floor for Civil Aircraft
HB/Z 5071-1978 Electroless nickel plating process
HB/Z 51-1993 K412 alloy non-vacuum smelting process manual
HB/Z 339.3-1999 Analysis Method for Aluminum Alloy Chromic Acid Anodizing Solution - the Determination of Sulfate Radical
HB/Z 207-1991 Specification for sampling of samples for chemical analysis of non-ferrous metal materials
HB/Z 223.14-1998 Aircraft Assembly Process - Appearance Inspection of Component
HB/Z 224-1992 Application Guideline on Die Mold Parts
HB/Z 5074-1993 Electrosilvering Technology
HB/Z 5218.7-2004 Methods for chemical analysis of aluminium alloys-Part 7：Determination of magnesium content by cupral Separation-EDTA volumetric method
HB/Z 273.7-1995 Operation Guideline on the Cutting Processing - Broaching
HB/Z 5086.7-2000 Analytical method of copper cyanide electroplating solution Determination of lead content by atomic absorption spectrometry
HB/Z 413-2013 Durability Design Criteria for Civil Aircraft Structures
HB/Z 209-1991 Specification for sampling of samples for gas analysis of metallic materials
HB/Z 273.9-1995 Operation Guideline on the Cutting Processing - Honing
HB/Z 154-1989 Recognized specifications for steel and high temperature alloy smelting and lumbering process for aviation
HB/Z 85 COR 1984 Corrigendum to HB/Z85-84
HB/Z 265-1994 Technology for Aluminum Plating of Titanium Alloy Fastener Ion
HB/Z 198-2011 Electron beam weld process and quality inspection for titanium and titanium alloys
HB/Z 5086.1-2000 Analytical method for copper cyanide electroplating solution Determination of cuprous cyanide content by EDTA volumetric method
HB/Z 69-1993 K419 Alloy Smelting Process Specification
HB/Z 181.3-1990 Programming format - COBOL language
HB/Z 43-1993 Instructions on K405 Alloy Smelting Process
HB/Z 248-1993 Aircraft assembly jig design
HB/Z 284-1996 Design Guideline on the High Temperature Air Duct System of Aircrafts
HB/Z 58-1993 K418 Alloy Refusion Process Specification
HB/Z 184-1990 Defect indication pattern for steel and iron parts magnetic particle inspection
HB/Z 270-1995 The Design and Manufacture Guideline on the Die Mould
HB/Z 245-1993 Design and Manufacture of Curing Die for Aircraft Composite Components
HB/Z 57-1993 K418 Alloy Smelting Process Specification

British Standards Institution (BSI)

BS HB 10168:1999 Handbook HB 10168:1999
BS HB 10170:1999 Handbook HB 10170:1999
BS HB 10169:1999 Handbook HB 10167:1999
BS HB 10167:1999 Handbook HB 10167:1999

Others: hb/z,hb z,hb/z 80,hb/z 230,hb/z 5083,hb/z 118,hb/z 252,hb/z 271,hb/z 292,hb/z 159,hb/z 83,hb/z 119,hb/z 276,hb/z 207,hb/z 57,hb/z 339.2,hb/z 5109.1,hb/z 251,z - hb