Automatic flow detection

Automatic flow detection, Total:319 items.

The international standard classification for "Automatic flow detection" includes: Measurement of force, weight and pressure , Non-destructive testing of metals , Veterinary medicine , Non-destructive testing , Welded joints , Volumetric equipment and measurements , Biology. Botany. Zoology , Electrical engineering in general , Lifts. Escalators , Surgical instruments and materials .

The Chinese standard classification for "Automatic flow detection" includes: Electromagnetic Measurement , Mechanics Measurement , Metal nondestructive testing method , Animal quarantine, veterinary and epidemic prevention , Basic standards and general methods , Welding and cutting , Oil and gas gathering and transportation equipment , Mechanical quantity instrument, automatic weighing equipment and other measuring instrument , Basic Subject in general , Basic standards and general methods , Basic standards and general methods on chemical fertilizers , Elevator , Meteorology , Medical apparatus and devices in general .

Henan Provincial Standard of the People's Republic of China

DB41/T 2230-2022 Regulations for remote flow measurement of fully automatic hydrographic cableway
DB41/T 1974-2020 Flow online automatic monitoring specification

Group Standards of the People's Republic of China

T/QGCML 3343-2024 Pressure transmitter automatic calibration detection system
T/QGCML 1992-2023 Automated nuclear radiation measuring instrument
T/HEBQIA 183-2023 Fully automatic logistics seedbed
T/ZEIIA 03-2022 OLED automatic optical inspection equipment
T/QGCML 2146-2023 Automatic detection device for seed phenotypic parameters
T/CIET 25-2023 Rotor shaft automatic detection equipment
T/QGCML 2383-2023 Automatic steel pipe length detection device
T/CASME 706-2023 Quality inspection requirements and testing process for electric scooters
T/SJZJLXH 0001-2018 Calibration specification for on-site flow detection system
T/QGCML 3137-2024 Portable Single Gas Detection Automation Software
T/CSTM 00425-2023 Non-destructive testing— Steel products —Characterization and verification of automatic eddy current flaw detector
T/CSTM 00674-2023 Non-destructive testing—Steel products—Automatic testing of wate-jet coupling ultrasonic for seamless steel tube
T/CSEE 0334.1-2022 Automatic detection device for relay protection tester Part 1: Automatic detection device for analog interface
T/CIET 20-2023 DC motor air tightness automatic test equipment
T/QGCML 2085-2023 Fully automatic inspection tool detection device
T/CIET 032-2023 Door motor automatic detection equipment
T/SASJL 0022-2024 Static current detection method for autonomous driving buses in cold regions
T/GAPEC 002-2019 Specification for Quality Inspection of electric vehicle AC charging spot
T/QGCML 043-2020 Constant temperature and humidity automatic weighing system technical requirements and testing methods
T/SCMES 20-2023 Automatic inspection equipment for interior space geometry of transportation vehicles
T/CIPR 082-2023 Automatic test tube inner wall cleaning machine
T/CEA 9012.2-2023 Requirements for self-inspection before putting into service of escalators and moving walks
T/CIDA 0014-2022 Specification for field detection of flow comparison by real flow method in open channel
T/ZS 0604-2024 Integrated automatic inspection system for grain quality
T/QGCML 3302-2024 Thermocouple wire thermoelectric potential automatic detection system
T/CIPR 045-2022 Reverse light environment face automatic detection technology
T/CSTM 00829-2022 Measurement method of comprehensive properties for automatic eddy current testing system for rails
T/QGCML 3963-2024 Gas detector layout line automatic detection system
T/QGCML 3340-2024 Platinum resistance thermocouple automatic detection system
T/QGCML 901-2023 Functional Educational Robot Automatically Detecting Obstacles
T/ZEIIA 04-2022 TFT-LCD Automatic Optical Inspection Equipment
T/SASJL 0032-2024 DC charging performance testing method for autonomous driving buses in cold regions
T/SZIEIA 02-2022 AOI automatic optical inspection system
T/CEEIA 329-2018 Residual current operated protective devices with self-test function（RCD-ST）
T/QGCML 1650-2023 Automatic sampling equipment with liquid level detection
T/CASMES 46-2022 Automatic detection system of appearance defects for tubular yarn
T/CASME 876-2023 Automatic engine automatic leak testing machine
T/CIET 031-2023 Fully automatic axial clearance detection equipment

National Metrological Verification Regulations of the People's Republic of China

JJG(轻工) 28-1989 Verification rules for bicycle flywheel circular runout tester
JJG 692-2010 Non-invasive Automated Sphygmomanometers
JJG 656-2013 Nitrate-Nitrogen Automatic Analyzers
JJG 631-1989 Verification Regulation for Ammonia Automatic Monitor
JJG 126-1995 Verification Regulation of Measuring Transducers for Converting A.c.Electrical Quantities Into D.c.Electrical Quantities
JJG(机械) 72-1992 Verification rules for small power single-phase motor automatic detection device
JJG(轻工) 10-1989 Regulations for verification of bicycle movement adjuster
JJG 1139-2017 Low Voltage Metering Current Transformer Automatic Testing System
JJG 527-2007 Verification Regulation of Automatic Monitor System for Vehicle Speeding
JJG(粮食) 2-1990 Verification rules for automatic scales for quantitative packaging of flour
JJG(轻工) 12-1989 Verification rules for measuring tool for thread runout of rear axle body of bicycle
JJG 2087-1990 Measuring Instruments for DC EMF'S
JJG 313-2010 Instrument Current Transformers
JJG 1095-2014 Environmental Noise Automatic Monitors
JJG 631-2013 Ammonia-Nitrogen Automatic Analyzers
JJG 656-1990 Verification Regulation of Nitrate Automatic Monitor
JJG(机械) 110-1992 SYZZ series speed and fuel consumption automatic measuring instrument verification regulations
JJG(轻工) 44-1989 Verification rules for radial runout tester of bicycle bell shaft

工业和信息化部

YB/T 4083-2020 Measurement method of comprehensive properties for automatic eddy current testing system for steel tubes and steel bars
JB/T 13887-2020 Automatic recirculation valves

Professional Standard - Navy

HJB 324.4-2006 Introduced Russian submarine weapon test equipment measurement and verification regulations Part 4: 2.761.043 Acoustic wake self-guiding device testing platform
HJB 448.3-2009 Verification regulation for torpedo testing equipments of Yu-3BG.Part 3:Homing test set

Military Standard of the People's Republic of China-General Armament Department

GJB 5043-2001 Specifications for automatic mine detectors
GJB 9135-2017 General specification for automatic detection system of military AC and DC power supply characteristics

National Metrological Technical Specifications of the People's Republic of China

JJF(商业) 1-1982 Provisional Verification Method for Mechanical Automatic Quantitative Scale
JJF 1261.22-2017 Rules of Metrology Testing for Energy Efficiency of Self-ballasted Fluorescent Lamps for General Lighting Service
JJF 1261.5-2012 Rules of Metrology Testing for Energy Efficiency Label of Automatic Electric Rice Cookers
JJF 1261.5-2017 Rules of Metrology Testing for Energy Efficiency of Automatic Electric Rice Cookers
JJF 1424-2013 Program of Pattern Evaluation of Ammonia-Nitrogen Automatic Analyzers
JJF(机械) 014-2008 Calibration specification for electric iron automatic detection device

未注明发布机构

ASTM RR-C08-1017 2000 C1444-Standard Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders
ASTM C1444-00 Standard Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders
DIN EN ISO 16911-2 E:2011-10 Manual and automatic determination of rates and flows in stationary source discharge ventilation ducts Part 2: Automatic measurement systems (draft)

工业和信息化部/国家能源局

JB/T 12725-2016 Non-destructive testing instruments. Ultrasonic automatic detection system

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17286.2-2016 Liquid hydrocarbons--Dynamic measurement--Proving systems for volumetric meters--Part 2: Pipe provers
GB/T 27538-2011 Animal influenza detection - Method of pyrosequencing for HA and NA in influenza virus A(H1N1)
GB/T 27539-2011 Animal influenza detection—Method of real-time RT-PCR for detection of influenza virus A
GB/T 27739-2011 Automatic catchweighing instruments
GB/T 44362-2024 Non-destructive testing of welds—Ultrasonic testing—Automated total focusing technique (TFM)
GB/T 17286.1-1998 Liquid hydrocarbons--Dynamic measurement--Proving systems for volumetric meters--Part 1: General principles
GB/T 7735-2016 Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for detection of imperfections
GB/Z 43410-2023 Non-destructive testing—Automated ultrasonic testing—Selection and application of systems
GB/T 17286.2-1998 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers
GB/T 28297-2012 Thicker steel plates—Method for automatic ultrasonic testing
GB/T 27537-2011 Animal influenza detection—Protocol of DNA microarray examination for influenza A virus subtypes
GB/T 25757-2010 Non-destructive testing - Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes
GB/T 17286.1-2016 Liquid hydrocarbons dynamic measurement proving systems for volumetric meters--Part 1: General principles
GB/T 31932-2015 Method for electromagnetic automatic ultrasonic testing for thicker steel plates
GB/T 41812-2022 General rules for performance testing of automatic liquid handling workstation
GB/T 7735-2016(XG1-2021) Automatic eddy current testing for flaws in seamless and welded (except submerged arc welded) steel pipes Amendment No. 1

Professional Standard - Electricity

DL/T 1529-2016 Rules of Testing of Distribution Automation Terminal Equipment
DL/T 353-2019(英文版) Maintenance Guidelines for High Voltage DC Measuring Devices
DL/T 353-2010 Guide for HVDC measuring equipment maintenance
DL/T 2367-2021 Technical specification for automatic detection system of distribution terminal

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35725-2017 General requirements for automatic testing system of power quality monitoring equipment
GB/T 35806-2018 Animal influenza detection—Protocol of duplex real-time RT-PCR for influenza virus subtypes H7 and N9

Professional Standard - Energy

NB/SH/T 6038-2021 Determination of flow pressure of lubricating greases(automatic method)

Professional Standard - Commodity Inspection

SN/T 0736.11-2002 Chemical analysis of fertilizers for import and export - Determination of nitrogen content by auto analyzer

Chongqing Provincial Standard of the People's Republic of China

DB50/T 828-2017 Self-inspection rules for escalators and moving walks

Tianjin Provincial Standard of the People's Republic of China

DB12/ 097.2-1998 Quality Inspection and Evaluation Regulations for Automatic Fire-fighting Systems Part 2: Quality Inspection and Evaluation Regulations for Automatic Sprinkler Systems
DB12/ 097.1-1998 Regulations for quality inspection and evaluation of automatic fire protection systems Part 1: Regulations for quality inspection and evaluation of automatic fire alarm systems

Professional Standard - Aviation

HB 20114-2012 Methods for eddy current test of aero-engine blades

Professional Standard - Post and Telecommunication

YD/T 4271-2023 Technical requirements for automatic quality measurement of in-band flow information in telecom operators' networks

Professional Standard - Electron

SJ 20235-1993 Verification regulation of model IC-1500 automatic tester

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 24474.2-2020 Measurement of ride quality—Part 2:Escalators and moving walks

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1799-2016 Technical requirements for the verification device of automatic milking metering machine

Professional Standard - Meteorology

QX/T 32-2005 Temperature grads automatic measuring instrument

Fujian Provincial Standard of the People's Republic of China

DB35/T 1936-2020 Escalator and moving walk vibration measurement and evaluation

Professional Standard - Environmental Protection

HJ 377-2019 Technical specifications and test procedures for water quality on-line automatic monitoring equipment of chemical oxygen demand（CODCr）

Professional Standard - Medicine

YY 0670-2008 Non-invasive automated sphygmomanometer

Professional Standard - Petroleum

SY 6999-2014 General requirements for on-line verification of flowmeters with mobile gas flow standard devices
SY/T 6999-2014 General requirements for flow meters on-line verification with a traveling gas flow standard facility

Taiwan Provincial Standard of the People's Republic of China

CNS 10311-1983 Method of Test for Vending Machine
CNS 7080-1983 Method of Test for Sharp Pencils
CNS 14506-2001 Method of test for pour point of petroleum products (automatic ressure pulsing method)

Japanese Industrial Standards Committee (JISC)

JIS G 0583:2021 Automated eddy current examination of steel pipes and tubes
JIS G 0583:2012 Automated eddy current examination of steel pipes and tubes
JIS B 7607:1994 Automatic checkweighing and weight grading instruments
JIS G 0586:2021 Automated flux leakage examination of steel pipes and tubes
JIS G 0586:2012 Automated flux leakage examination of steel pipes and tubes
JIS Z 2324-4:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 4: Method of testing for performance characteristics of eddy current inspection system
JIS B 7607:2017 Automatic catchweighing instruments
JIS B 7607:2018 Automatic catchweighing instruments

SCC

BS 3889-2A:1986 Methods for non-destructive testing of pipes and tubes-Automatic eddy current testing of wrought steel tubes
AWWA WQTC71534 The Use of an In-Flow Imaging Flow Cytometer for Automated Detection and Monitoring of Cyanobacteria
AWWA ACE90132 Automatic Coagulant Dose Control Using a Streaming Current Detector Full Scale Application in Drinking Water Treatment
VDI 4480 BLATT 3-1999 Throughput of automatic carousel storage
UNE-EN 10246-3:2000 NON-DESTRUCTIVE TESTING OF STEEL TUBES. PART 3: AUTOMATIC EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS.
NS-EN 10246-3:1999 Non-destructive testing of steel tubes — Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
DANSK DS/ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
DANSK DS/EN ISO 16911-2:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems
DANSK DS/EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
JIS G 0582:2022 Automated ultrasonic examination of steel pipes and tubes
AWWA ACE92144 A Fundamental Basis for Use of the Streaming Current Detector
NS-EN ISO 16911-2:2013 Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 2: Automated measuring systems (ISO 16911-2:2013)
SA TR ISO 3313:2023 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
BS ISO/TR 3313:1998 Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
BS PD ISO/TR 9824:2007 Hydrometry. Measurement of free surface flow in closed conduits
AENOR UNE-EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
NS-EN ISO 10893-2:2011 Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
09/30166461 DC BS ISO 10893-2. Non-destructive testing of steel tubes. Part 2. Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
DIN EN ISO 16911-2 E:2011 Draft Document - Stationary source emissions - Manual and automatic determination of velocity and volumetric flow in ducts - Part 2: Automated measuring systems (ISO/DIS 16911-2:2011); German version prEN ISO 16911-2:2011
VDI/VDE 2650 BLATT 3-2006 Requirements for self-monitoring and diagnostics in field instrumentation — flow measurement
VDI/VDE 2640 BLATT 4-1983 Network measurements in flow cross sections; determination of the average temperature in flowing liquids
AWWA JAW26054 Journal AWWA — Using Streaming Current Detectors in Water Treatment
DIN EN ISO 10893-2 E:2009 Draft Document - Non destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO/DIS 10893-2:2008); German version prEN ISO 10893-2...
DANSK DS/ISO 13588:2019 Non-destructive testing of welds – Ultrasonic testing – Use of automated phased array technology
AWWA ACE90137 Automatic Leak Detection System on Large Diameter Pipes

HU-MSZT

MSZ 9650/16-1975 Pigment testing. Self-rectifying feature detection
MSZ 1485-1962 Quality standards and testing for automatically operating harvesting and threshing machines
MSZ 6544-1982 flow measuring body
MSZ 275/3-1980 High current free wire equipment. Testing standards
MSZ 275/1-1979 High current free wire equipment. concept testing
MSZ 15436-1982 Metal powder flow ability testing
MSZ 17132-1987 DC detection and measurement equipment. Technical products and testing
MSZ 21456/31-1983 Air gas pollution detection. Nitrogen hydroxide detection automatic analysis
MSZ 10074-1970 Metal cutting tools. Flow performance testing

Association Francaise de Normalisation

NF EN IEC 60730-2-15:2019 Automatic electrical control devices - Part 2-15: particular requirements for automatic electrical control devices detecting air flow, water flow and water level
NF EN 27842:1992 Automatic steam traps - Determination of flow rate - Test methods
NF X43-344-2*NF EN ISO 16911-2:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2 : automated measuring systems
NF EN ISO 16911-2:2013 Emissions from stationary sources - Manual and automatic determination of flow velocity and flow volume in ducts - Part 2: automatic measuring systems
NF ISO 1438:2021 Hydrometry - Measurement of flow in free surface flow channels using thin wall weirs
NF X10-390-1:1991 Measurement of free surface flow in closed conduits-Part1:Methods
NF X10-390-2:1991 Measurement of free surface flow in closed conduits-Part2:Equipment
NF ISO 8103-9:2022 Escalators and moving walks - Part 9: measurement of the quality of their movement
NF A49-785-2*NF EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2 : automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections.
NF EN ISO 10893-3/A2:2020 Non-destructive testing of steel tubes - Part 3: automated full-circumference leakage flow testing of seamless and welded ferromagnetic steel tubes (except submerged arc under powder flux) for the detection of ...
NF EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: automated eddy current testing for the detection of imperfections in seamless or welded steel tubes (except submerged arc under powder flux)
NF P82-208-9*NF ISO 8103-9:2022 Escalators and moving walks - Part 9 : measurement of ride quality
NF EN ISO 23913:2009 Water quality - Chromium(VI) dosage - Flow analysis method (FIA and CFA) and spectrometric detection

JP-JEM

JEM 1446-2008 Inspection of motor operated valve actuators used for nuclear power plant valves

German Institute for Standardization

DIN EN ISO 10893-2:2020-10 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011 + Amd 1:2020); German version EN ISO 10893-2:2011 + A1...
DIN EN ISO 16911-2:2013-06 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems (ISO 16911-2:2013); German version EN ISO 16911-2:2013
DIN EN 27842:1991 Automatic steam traps; determination of discharge capacity; test methods (ISO 7842:1988); german version EN 27842:1991
DIN EN ISO 13588:2019-07 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019); German version EN ISO 13588:2019
DIN EN ISO 16911-2:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems (ISO 16911-2:2013); German version EN ISO 16911-2:2013

GOSTR

GOST R ISO 10893-2-2016 Seamless and welded steel tubes. Part 2. Automated eddy current testing for the detection of imperfections
GOST 34486.2-2018 Escalators and moving walks. Rules and methods of examinations (tests) and measurements. Measurement of ride quality

ES-UNE

UNE-EN ISO 10893-2:2011/A1:2021 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch; change accep...
UNE-EN ISO 13588:2020 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)

Korean Agency for Technology and Standards (KATS)

KS B ISO 7842:2003 Automatic steam traps－Determination of discharge capacity－Test methods
KS B 5643-2003 Continuous analyzers for oxidants in ambient air
KS I ISO 14164-2006(2016) Stationary source emissions－Determination of the volume flowrate of gas streams in ducts(Automated method)
KS B 5343-2017 Automatic check weighing and weight grading instruments
KS B 5343-2022 Automatic check weighing and weight grading instruments
KS B 5313-2008 Recording rain gauges
KS B 5343-2017(2022) Automatic check weighing and weight grading instruments
KS B ISO TR 9824-1:2015 Measurement of free surface flow in closed conduits－Part 1：Methods
KS B ISO TR 3313-2019 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
KS B ISO TR 9824-1:2003 Measurement of free surface flow in closed conduits-Part 1:Methods
KS B ISO 18481:2020 Hydrometry — Liquid flow measurement using end depth method in channels with a free overfall
KS E 4116-2006(2011) Hot wire type gas alarms
KS B ISO TR 3313:2014 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
KS B ISO TR 3313:2004 Measurement of fluid flow in closed conduits-Guidelines on the effects of flow pulsations on flow-measurement instruments
KS B ISO TR 3313-2014(2019) Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
KS B 6931-2005(2010) Pneumatic fluid power－Determination of flow-ratecharacteristics of pneumatic control valves
KS E 4115-2006(2011) Interferometer type gas alarms
KS B ISO 18738-2-2023 Measurement of ride quality — Part 2: Escalators and moving walks
KS C IEC 60730-2-15:2020 Automatic electrical controls —Part 2-15: Particular requirements for automatic electrical air flow,water flow and water level sensing controls
KS E 4115-1980 Interferometer type gas alarms
KS B 0894-2003 Methods for automatic ultrasonic testing for welds of ferritic steel

International Telecommunication Union (ITU)

ITU-T Q.137-1988 Automatic testing equipment
ITU-R REPORT M.2084 RUSSIAN-2006 Satellite detection of automatic identification system messages
ITU-R REPORT M.2084 CHINESE-2006 Satellite detection of automatic identification system messages
ITU-R REPORT M.2084 ARABIC-2006 Satellite detection of automatic identification system messages
ITU-R INFORME M.2084 SPANISH-2006 Satellite detection of automatic identification system messages

International Organization for Standardization (ISO)

ISO/TR 9824:2007 Hydrometry - Measurement of free surface flow in closed conduits
ISO 16911-2:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems
ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
ISO 18481:2017 Hydrometry - Liquid flow measurement using end depth method in channels with a free overfall
ISO/TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
ISO 10893-2:2011/Amd 1:2020 Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections — Amendment 1: Chang
ISO/TR 3313:2018 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
ISO/TS 20460:2015 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
ISO 8103-9:2022 Escalators and moving walks — Part 9: Measurement of ride quality

VDI - Verein Deutscher Ingenieure

VDI 4480 Blatt 3-1997 Durchsatz von automatischen Umlauflagern
VDI 2466 Blatt 2-2007 Messen gasfoermiger Emissionen - Messen von Methan - Automatisches Verfahren - Flammenionisationsdetektor (FID)
VDI/VDE 2650 Blatt 3-2004 Requirements regarding self-monitoring and diagnosis in field instrumentation - Flow measurement

Indonesia Standards

SNI 09-0670-1989 Bycycle for crankshafts
SNI 19-4199-1996 Measurement of fluid flow in open channels - Methods for measurement of suspended sediment
SNI ISO 7278-2:2011 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers

British Standards Institution (BSI)

BS EN ISO 16911-2:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Automated measuring systems
BS EN ISO 10893-2:2011+A1:2020 Non-destructive testing of steel tubes - Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BS 7461:1991 Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control
BS ISO TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
BS ISO 8103-9:2022 Escalators and moving walks - Measurement of ride quality
BS PD ISO/TS 17951-2:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using continuous flow analysis (CFA) with automated in-line distillation
BS ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
BS ISO/TR 3313:1998(1999) Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow - measurement instruments
PD ISO/TR 3313:2018 Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
PD ISO/TR 9824:2007 Hydrometry. Measurement of free surface flow in closed conduits
BS ISO 18481:2017 Hydrometry. Liquid flow measurement using end depth method in channels with a free overfall
BS PD ISO/TR 3313:2018 Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
BS EN 10246-3:2000 Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BS ISO 7278-1:1996 Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters - General principles
BS EN ISO 25745-1:2012 Energy performance of lifts, escalators and moving walks. Energy measurement and verification
BS 3680-11A:1992 Measurement of liquid flow in open channels - Free surface flow in closed conduits - Methods of measurement
19/30398267 DC BS EN ISO 10893-2 AMD1. Non-destructive testing of steel tubes. Part 2. Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections

CN-QIYE

Q/GDW 1573-2014 Technical specifications for automatic verification system of low-voltage current transformers for metering
Q/GDW 11278-2014 Calibration method for automatic verification system of low-voltage current transformer for metering
Q/GDW 533-2010 Specifications for maintenance of high-voltage direct current transmission direct current measuring devices

GOST

GOST ISO 10893-2-2023 Seamless and welded steel tubes. Part 2. Automated eddy current testing for the detection of imperfections

Danish Standards Foundation

DS/ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
DS/EN ISO 16911-2:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems
DS/EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
DS/CEN/TR 15134:2005 Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
DS/EN ISO 7278-2:1996 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers

European Committee for Standardization (CEN)

EN ISO 16911-1:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
EN ISO 16911-2:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems
EN ISO 25745-1:2012 Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement and verification
EN 10246-3:1999 Non-Destructive Testing of Steel Tubes - Part 3: Automatic Eddy Current Testing of Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for the Detection of Imperfections

American Society for Testing and Materials (ASTM)

ASTM D7743-12 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders

RO-ASRO

STAS 6019/3-1988 Mcasurement and monitoring-automati- zation in industrial processes APPARATUS AND HQUII'MKNTS Tenuinology
STAS 8972/4-1982 Hydrometry WATER HOW MEASUREMENT IN THE FREE LEVEL FLOW SYSTEMS Method of stage discharge relation (rating curve)
STAS 10041-1975 LIQUID PENETRANT FLOW DETECTION Terminology

Association of German Mechanical Engineers

VDI 2466 Blatt 2-2008 Gaseous emission measurement - Measurement of methane - Automatic method - Flame ionisation detector (FID)
VDI/VDE 2628 Blatt 1-1989 Automated visual inspection; description of the testing task

BE-NBN

NBN-EN 27842-1992 Automatic water vapor purifier. Measurement of flow rate. experimental method
NBN S 21-108-1988 Components of automatic fire détection Systems - Part 8 : High temperature heat detectors
NBN 819 ADD 7-1991 AUTOMATISCHE AARDSTROOMSCHAKELAARS MET DIFFERENTIEELINRICHTING Bijkomende voorschriften voor automatische aardstroomschakelaars met een nominale spanning niet groter dan 415 V

GSO

BH GSO ISO 14164:2016 Stationary source emissions -- Determination of the volume flowrate of gas streams in ducts -- Automated method
GSO ISO 14164:2015 Stationary source emissions -- Determination of the volume flowrate of gas streams in ducts -- Automated method
GSO ISO/TR 9824:2015 Hydrometry -- Measurement of free surface flow in closed conduits
BH GSO ISO 10893-2:2016 Non-destructive testing of steel tubes -- Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
OS GSO ISO 10893-2:2015 Non-destructive testing of steel tubes -- Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
GSO ISO/TR 3313:2021 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
BH GSO ISO/TR 3313:2022 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
GSO ISO 10893-2:2015 Non-destructive testing of steel tubes -- Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BH GSO ISO/TR 9824:2016 Hydrometry -- Measurement of free surface flow in closed conduits
OS GSO ISO 7278-2:2014 Liquid hydrocarbons -- Dynamic measurement -- Proving systems for volumetric meters -- Part 2: Pipe provers
GSO ISO 9555-1:2014 Measurement of liquid flow in open channels -- Tracer dilution methods for the measurement of steady flow -- Part 1: General
GSO ISO 18738-2:2015 Measurement of ride quality -- Part 2: Escalators and moving walks
BH GSO ISO 7278-2:2016 Liquid hydrocarbons -- Dynamic measurement -- Proving systems for volumetric meters -- Part 2: Pipe provers
BH GSO ISO 18738-2:2016 Measurement of ride quality -- Part 2: Escalators and moving walks
OS GSO ISO 3847:2015 Liquid flow measurement in open channels by weirs and flumes -- End-depth method for estimation of flow in rectangular channels with a free overfall
GSO ISO 3847:2015 Liquid flow measurement in open channels by weirs and flumes -- End-depth method for estimation of flow in rectangular channels with a free overfall

KR-KS

KS B ISO 10893-2-2023 Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded(except submerged arc-welded) steel tubes for the detection of imperfections
KS B ISO 18481-2020 Hydrometry — Liquid flow measurement using end depth method in channels with a free overfall
KS B ISO 18738-2-2018(2023) Measurement of ride quality — Part 2: Escalators and moving walks
KS C IEC 60730-2-15-2020 Automatic electrical controls —Part 2-15: Particular requirements for automatic electrical air flow,water flow and water level sensing controls

Society of Automotive Engineers (SAE)

SAE J1939/16-2018 Automatic Baud Rate Detection Process
SAE J1939/16-2015 Automatic Baud Rate Detection Process

SAE - SAE International

SAE J1939-16-2015 Automatic Baud Rate Detection Process
SAE J1939-16-2018 Automatic Baud Rate Detection Process

AENOR

UNE 77227:2001 Stationary source emissions. Determination of the volume flowrate of gas stream in ducts. Automated method.
UNE-EN ISO 16911-2:2014 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems (ISO 16911-2:2013)
UNE-CEN/TR 15134:2011 IN Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
UNE-EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)

American Society of Mechanical Engineers (ASME)

ASME MFC-21.2-2010 Measurement of Fluid Flow by Means of Thermal Dispersion Mass Flowmeters

American Industrial Hygiene Association （AIHA)

ASSE 1028-1981 Performance Requirements for Automatic Flow Controllers

YU-JUS

JUS H.B8.766-1982 Testing of pesticides. Flowability of povvders
JUS N.S6.200-1985 Components of auto matic fire detection system. Introduction

CN-DB 1

DB1508/T 147-2023 Automatic flow measurement data verification specifications

PL-PKN

PN M42001-1974 National Automatisation nd Measurements stem Feed ressure and middle — ressure pneumatic signals e?uirements

American National Standards Institute （ANSI)

ANSI/IEEE C63.22:2004 Guide for Automated EMC Measurements

SE-SIS

SIS 11 40 50-1972 Non-destructive testing. Terminology. Register

AGMA - American Gear Manufacturers Association

01FTM3-2001 Automated Spiral Bevel Gear Pattern Inspection

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

REPORT M.2123-2007 Long range detection of automatic identification system (AIS) messages under various tropospheric propagation conditions
REPORT M.2084-2006 Satellite detection of automatic identification system messages

ITE - Institute of Transportation Engineers

LP-124A-1991 Traffic Detector Handbook (2nd Edition)
LP-124- Traffic Detector Handbook (1st Edition)

TR-TSE

TS 871-1971 VOCAEULARY OF TERMS AND SYMEOLS USED ?N CONNECTION WITH THE MEASUREMENT OF LIQUID FLOW WITH A FREE SURFACE

DIN

DIN EN 10246-3:2000 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; English version of DIN EN 10246-3

IPC - Association Connecting Electronics Industries

IPC AI-641-1987 User's Guidelines for Automated Solder Joint Inspection Systems
IPC AI-642-1988 User's Guidelines for Automated Inspection of Artwork@ Innerlayers and Unpopulated PWBs

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C63.22-2004 Guide for Automated EMC Measurements

Lithuanian Standards Office

LST EN ISO 10893-2:2011 Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
LST ISO 14164:2001 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method (identical ISO 14164:1999)

ESDU - Engineering Sciences Data Unit

SPF-M4-5-2007 Fluid Dynamic Gauging (FDG) in duct flows.

Standard Association of Australia （SAA）

AS 3778.4.10:1991 Measurement of water flow in open channels - Measurement using flow gauging structures - End-depth method for estimation of flow in rectangular channels with a free overfall
AS 3778.4.10:1991(R2009) Measurement of water flow in open channels using flow measuring structures End depth method for estimating flow in rectangular channels with free overflow

CZ-CSN

CSN 65 4826-1982 Fertilizers. Method for the determination of free flowlng property

Cooling Technology Institute

CTI STD-146-2008 Standard for Liquid Flow Measurement

GM North America

GM 9985076-1983 Fluid, Automatic Transmission
GM 9985158-1982 Fluid Automatic Transmission
GM 9985286-1996 Fluid, Automatic Transmission
GM 9985026-1980 Fluid Automatic Transmission

International Electrotechnical Commission (IEC)

IEC 60730-2-15:2017 Automatic electrical controls - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls

GM Europe

GME16553-2011 Schaltqualit盲t眉berpr眉fung f眉r Automatische Getriebe unter kalten Bedingungen im manuellen Mode Shiftquality Check for Automatic Transmissions under cold Conditions in manual Mode Revision 1; English/German; Includes Appendix A