Probe Measurement System

Probe Measurement System, Total:82 items.

The international standard classification for "Probe Measurement System" includes: Chemical analysis , Measuring instruments , Optical equipment , Other methods of testing of metals , Other standards related to optics and optical measurements , Optical measuring instruments , Other standards related to analytical chemistry , Testing of metals , Biology. Botany. Zoology , Electricity. Magnetism. Electrical and magnetic measurements , Burners. Boilers .

The Chinese standard classification for "Probe Measurement System" includes: Basic standards and general methods , Basic standards and general methods , Electron optics and other physical optics instrument , Semimetal and semiconductor material analysis method , Optical Measurement , Electrochemical, thermochemistry and optical profile type analyzer , Metal physical property test method , Biochemical reagent and clinical analysis reagent , Radio Measurement , Boiler and its auxiliary equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 42659-2023 Surface chemical analysis―Scanning probe microscopy―Determination of geometric quantities using SPM:Calibration of measuring systems
GB/T 26074-2010 Germanium monocrystal—Measurement of resistivity-DC linear four-point probe
GB/T 15074-1994 General guide for EPMA quantitative analysis
GB/T 15074-2008 General guide of quantitative analysis by EPMA
GB/T 17363-1998 Method of quantitative electron probe microanalysis on gold products
GB/T 29190-2012 Measurement methods of drift rate of scanning probe microscope
GB/T 16857.5-2004 Geometrical Product Specifications(GPS) - Acceptance and reverification tests for coordinate measuring machines(CMM) - Part 5:CMMs using multiple-stylus probing systems

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39518-2020 Geometrical product specifications (GPS)—Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
GB/T 1551-2021 Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method

未注明发布机构

DIN 6800-1 E:2013-04 Procedures in dosimetry; principles of photon and electron dosimetry with probe-type detectors
DIN 4000-178 E:2015-06 Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli
AS 1603.1:1997(R2016) Automatic fire detection and alarm system heat detector
DIN 6800-5:1980 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 5: Thermoluminescence dosimetry
DIN EN ISO 10360-5 E:2018-07 Product Geometric Specifications (GPS) Acceptance and Verification Testing of Coordinate Measuring Systems (CMS) Part 5: Coordinate Measuring Machines (CMM) using single-probe and multi-probe contact probing systems using discrete point and/or scanning me
DIN 6801-1 E:2016-06 Procedures of dosimetry with probe-type detectors for proton and ion radiation - Part 1: Ionization chambers

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34797-2017 Quality technical requirements of primers and probes
GB/T 16857.5-2017 Geometrical product specifications ( GPS)一Acceptance and reverification tests for coordinate measuring machines (CMM)一Part 5:CMMs using single or multiple stylus contacting probing systems

Military Standard of the People's Republic of China-General Armament Department

GJB 9727-2020 Langmuir Probe Detector Specifications

National Metrological Verification Regulations of the People's Republic of China

JJG 508-2004 Verification Regulation of Resistivity Measuring Instruments with Four-Probe Array Method

Professional Standard - Medicine

YY/T 1869-2023 Detector array measurement system - Performance characteristics and test methods

Professional Standard - Energy

NB/T 11267-2023 Boiler sootblower and gas temperature probe

Professional Standard - Machinery

JB/T 8501-1996 Boiler Soot Blowers and Thermoprobe

中国石油天然气总公司

SY/T 5927-1994 Petroleum Geophysical Exploration Global Positioning System (GPS) Measurement Specifications

AT-ON

ONORM M 1384-1989 Coordinate metrology; process of probing, uncertainty of probing, type of probe
ONORM M 1348-1995 Control of measuring and test equipment - Testing instruction for electrical linear measuring probes

German Institute for Standardization

DIN 4000-178:2016 Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli
DIN 4000-178:2016-12 Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli
DIN 4003-178:2016-12 Concept for the design of 3D models based on properties according to DIN 4000 - Part 178: Probing systems, stylus systems and styli / Note: Applies in conjunction with DIN 4000-178 (2016-12), DIN 4003-1 (2014-02).
DIN EN ISO 10360-5:2020 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or sc
DIN 6800-1:1980 Procedures in dosimetry; principles of photon and electron dosimetry with probe-type detectors
DIN 6800-4:2000-12 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 4: Film dosimetry
DIN 6800-1:2016 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 1: General
DIN 6801-1:2019-09 Procedures of dosimetry with probe-type detectors for proton and ion radiation - Part 1: Ionization chambers
DIN EN 54-5:2001 Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors; German version EN 54-5:2000

VDI - Verein Deutscher Ingenieure

VDI/VDE 2656 Blatt 1-2006 Bestimmung geometrischer Messgroessen mit Rastersondermikroskopen - Kalibrierung von Messsystemen

International Organization for Standardization (ISO)

ISO 230-10:2011/Amd 1:2014 Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools - Amendment 1: Measuring performance with scanning probes
ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
ISO/TR 4286:2021 Intelligent transport systems - Use cases for sharing of probe data
ISO/TS 17865:2016 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
ISO/PAS 12868:2009 Geometrical product specification (GPS) - Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems
ISO 10360-5:2020 Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus co
ISO 10360-5:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems

SCC

VDI/VDE 2656 BLATT 1-2019 Determination of geometric measurements with scanning probe microscopes - calibration of measuring systems
DIN 4000-178 E:2015 Draft Document - Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli
VDI/VDE 2634 BLATT 1-2002 Optical 3D measuring systems — imaging systems with point-shaped probing
11/30199166 DC BS ISO 11952. Surface chemical analysis. Scanning probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
VDI/VDE 2634 BLATT 1-2002 Optical 3D measuring systems — imaging systems with point-shaped probing
DIN 4003-178 E:2015 Draft Document - Concept for the design of 3D models based on properties according to DIN 4000 - Part 178: Probing systems, stylus systems and styli
BS DD ISO/PAS 12868:2009 Geometrical product specification (GPS). Coordinate measuring machines (CMM). Testing the performance of CMMs using single-stylus contacting probing systems
BS EN ISO 10360-5:2001 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)-CMMs using multiple stylus probing systems
DIN 6801-1:2019 Procedures of dosimetry with probe-type detectors for proton and ion radiation - Part 1: Ionization chambers
BS PD CLC/TS 50131-2-8:2012 Alarm systems. Intrusion and hold-up systems-Intrusion detectors. Shock detectors
AS 1603.1:1990 Automatic fire detection and alarm systems - Heat detectors

Association of German Mechanical Engineers

VDI/VDE 2656 Blatt 1-2008 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems

British Standards Institution (BSI)

BS PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
BS EN ISO 10360-5:2010 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using single and multiple stylus contacting probing systems
BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
BS PD ISO/TR 4286:2021 Intelligent transport systems. Use cases for sharing of probe data
PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
BS EN 54-5:2017+A1:2018 Fire detection and fire alarm systems - Heat detectors. Point heat detectors
BS EN 54-5:2001 Fire detection and fire alarm systems. Heat detectors. Point detectors
BS EN 50131-2-8:2016 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Shock detectors

Association Francaise de Normalisation

NF E60-100-10/A1:2014 Test code for machine tools - Part 10 : determination of measuring performance of probing systems of numerically controlled machines tools - Amendment 1 : measuring performance with scanning probes
NF EN ISO 10360-5:2020 Geometrical product specifications (GPS) - Acceptance and periodic verification tests of three-dimensional measuring systems (SMT) - Part 5: CMM using single stylus or multiple stylus probing systems using...

GSO

GSO ISO 11952:2015 Surface chemical analysis -- Scanning-probe microscopy -- Determination of geometric quantities using SPM: Calibration of measuring systems
BH GSO ISO 11952:2017 Surface chemical analysis -- Scanning-probe microscopy -- Determination of geometric quantities using SPM: Calibration of measuring systems
OS GSO ISO 11952:2015 Surface chemical analysis -- Scanning-probe microscopy -- Determination of geometric quantities using SPM: Calibration of measuring systems
GSO ISO 10360-5:2024 Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or...

RU-GOST R

GOST R 8.635-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for calibration
GOST 8.593-2009 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification
GOST 24392-1980 Monocrystalline silicon and germanium. Measurement of the electrical resistivity by the four-probe method

KR-KS

KS M ISO 7278-2-2003(2023) Liquid hydrocarbons - Verification systems for dynamic measurement volume meters - Part 2: Pipe provers

Korean Agency for Technology and Standards (KATS)

KS B ISO 10360-5-2019 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems
KS D 2714-2006 Scanning probe microscope-Method for lateral force microscope