Method Validation Scope

Method Validation Scope, Total:174 items.

The international standard classification for "Method Validation Scope" includes: General standards related to shipbuilding and marine structures , Protection against dangerous goods , Optical equipment , Marine engines and propulsion systems , Metrology and measurement in general .

The Chinese standard classification for "Method Validation Scope" includes: Overall vessels in general , Marking, packaging, transport and storage in general , Optical instrument in general , Marine internal-combustion engine , Legal medical expert , Hygiene, safety and labor protection , Industrial automation and control device in general .

Shanxi Provincial Standard of the People's Republic of China

DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography
DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy
DB14/T 2798-2023 Specification for verification of chemical analysis methods in testing laboratories

工业和信息化部

YD/T 3819-2021 Test method for wlan equipments supporting source address validation
JB/T 14409-2022 Test methods of melting temperature range for brazing filler metal and solder

Professional Standard - Commodity Inspection

SN/T 3898-2014 Guidance on the validation and acceptance of cosmetics alternative testing methods in vitro
SN/T 3526-2013 Chemicals - Validation basic requirements of alternative methods for in vitro toxicological testing
SN/T 4001-2015 Protocol of verification for animal quarantine method standards

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3851-2023 Specification for verification of chromatographic analysis methods for quality and safety testing of livestock products

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 30010-2013 Method for the verification of energy efficiency design index of ships
GB/T 12085.1-2022 Optics and photonics—Environmental test methods—Part 11:Mould growth
GB/T 41889-2022 Ships and marine technology—Verification method for portable power measurement using a strain gauge
GB/T 18851.5-2005 Non-destructive testing - Penetrant testing - Part5: Means of verification
GB/T 15647-1995 Compliance test procedures for steady-state availability
GB/T 12085.1-2010 Optics and optical instruments - Environmental test methods - Part 1:Definitions extent of testing
GB/T 12085.1-1989 Optics and optical instruments--Environmental test methods--Definitions extent of testing
GB/T 21781-2008 Test methods for melting point and melting range of chemical products - Capillary tube method

Jilin Provincial Standard of the People's Republic of China

DB22/T 2516-2016 Validation specification for a new method for the detection of drug residues in aquatic products

司法部

SF/T 0063-2020 General rules for method validation in forensic toxicology

Professional Standard - Agriculture

GB 31604.59-2023 National food safety standard - Food contact materials and products - General rules for verification of chemical analysis methods
GB 4789.45-2023 National food safety standard - General rules for verification of microbial test methods
GB 5009.295-2023 National food safety standard - General rules for verification of chemical analysis methods
SN/T 5490-2023 Guidelines for verificationof technical specificationsof Customs

Professional Standard - Traffic

JT/T 827-2012 Limits and Verification Methods of CO2 Emission for Commercial Ships

Professional Standard - Railway

TB/T 2536-1995 Test method for constant power speed range of diesel locomotive

Professional Standard - Machinery

JB/T 9233.10-1999 General methods of testing the performance of industrial process measurement and control instruments Overrange effect
JB/T 5164-1991 Electric fence pulser test method
JB/T 7138.4-1993 Test method for braided net fence

Professional Standard-Ships

CB 20072-2012 Test method of sea trial for verifying torpedo guidance law

Group Standards of the People's Republic of China

T/ZMDS 10006-2019 Reliability Testing and Assessment for Medical Electron Linear Accelerator Part 2:Method of Reliability Index Verification for Power Supply of Electron Gun
T/SUCA 045-2023 High-Dynamic Range（HDR）display certification technical specification
T/CECPA 002-2020 Evaluation and Validation Method for Nuclear Power Design and Safety Analysis Software
T/HNCAA 027-2021 Verification of inspection and testing standard methods
T/SUCA 044-2023 HDR LED display certification technical specification

Hebei Provincial Standard of the People's Republic of China

DB13/T 157.6-1993 Construction acceptance method of "Waishanzhuan" project

VN-TCVN

TCVN 4382-1986 Measuring equipments.Verification schedule.Scope and layout

European Committee for Standardization (CEN)

EN ISO 18063-2:2021 Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2:2021)
EN 13087-6:2012 Protective helmets - Test methods - Part 6: Field of vision
EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)

International Organization for Standardization (ISO)

ISO 18063-2:2021 Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks
ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
ISO 16140-3:2021/CD Amd 1 Microbiology of the food chain-Method validation-Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
ISO 16140-4:2020 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory
ISO 16140-4:2020/CD Amd 2 Microbiology of the food chain-Method validation-Part 4: Protocol for method validation in a single laboratory
ISO/DIS 16140-7 Microbiology of the food chain — Method validation — Part 7: Protocol for the validation of identification methods of microorganisms
ISO 12828-2:2016 Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods
ISO 9022-1:2012 Optics and photonics - Environmental test methods - Part 1: Definitions, extent of testing
ISO 16140-4:2020/DAmd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Validation of a larger test portion size for qualitative methods

British Standards Institution (BSI)

BS EN ISO 18063-2:2021 Rough-terrain trucks. Visibility test methods and their verification. Slewing rough-terrain variable-reach trucks
BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS ISO 9022-1:2012 Optics and photonics. Environmental test methods. Definitions, extent of testing
BS EN ISO 16140-4:2020+A1:2024 Microbiology of the food chain. Method validation - Protocol for method validation in a single laboratory
BS EN 12227-2:1999 Playpens for domestic use - Test methods
BS EN ISO 16140-3:2021 Microbiology of the food chain. Method validation. Protocol for the verification of reference methods and validated alternative methods in a single laboratory
PD IEC/TR 62935:2016 Measurement methods. High dynamic range video
BS PD IEC/TR 62935:2016 Measurement methods. High dynamic range video
BS EN ISO 16140-2:2016 Microbiology of the food chain. Method validation. Protocol for the validation of alternative (proprietary) methods against a reference method
BS EN ISO 16140-2:2016+A1:2024 Microbiology of the food chain. Method validation - Protocol for the validation of alternative (proprietary) methods against a reference method
BS EN ISO 16140-5:2020 Microbiology of the food chain. Method validation - Protocol for factorial interlaboratory validation for nonproprietary methods
BS EN ISO 16140-4:2020 Microbiology of the food chain. Method validation - Protocol for method validation in a single laboratory

American Society for Testing and Materials (ASTM)

ASTM D6352-19e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D1519-95(2000) Standard Test Method for Rubber Chemicals-Melting Range
ASTM E2938-15 Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range
ASTM D1519-95(2009) Standard Test Method for Rubber Chemicals-Melting Range
ASTM D1519-95(2004)e1 Standard Test Method for Rubber Chemicals-Melting Range
ASTM D1519-95(2009)e1 Standard Test Method for Rubber Chemicals-Melting Range
ASTM D6352-04(2009) Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176;C by Gas Chromatography
ASTM D6352-14 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D6352-02 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176C by Gas Chromatography
ASTM D6352-03 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176;C by Gas Chromatography
ASTM D7213-23 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D1519-95(2014) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D2265-06 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D6352-04e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176;C by Gas Chromatography
ASTM D2265-00 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D1078-11(2019) Standard Test Method for Distillation Range of Volatile Organic Liquids
ASTM D2265-94a Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D2265-06(2014) Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D6352-98 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176C by Gas Chromatography
ASTM D7213-14 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D2265-15 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D2265-22 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D6352-19 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 ℃ to 700 ℃ by Gas Chromatography
ASTM D6352-15 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174&x2009&xb0C to 700&x2009&xb0C by Gas Chromatography
ASTM D7398-23 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D7398-07 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615C by Gas Chromatography
ASTM D7213-15 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100&x2009&xb0C to 615&x2009&xb0C by Gas Chromatography
ASTM D1519-95(2023) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D7398-21 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D7398-11(2021) Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 ��C to 615 ��C by Gas Chromatography
ASTM D2595-22 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
ASTM D2265-20 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D1519-95(2019) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D7500-08 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils x2014; in Boiling Range from 100 to 735 x00B0; C by Gas Chromatography
ASTM D2887-04 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D2265-19 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D2265-15e1 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
ASTM D7398-11(2016) Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100&x2009&xb0C to 615&x2009&xb0C by Gas Chromatography
ASTM D2887-04a Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D2595-96 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range

RU-GOST R

GOST 8.322-1978 State system for ensuring the uniformity of measurements. Measuring signal generators. Methods and means for verification within the range of 0.03-17.44 GHz
GOST R 8.805-2012 State system for ensuring the uniformity of measurements. State verification schedule for means measuring electric field intensity within the frequency range from 0,0003 to 2500 MHz
GOST R 8.808-2012 State system for ensuring the uniformity of measurements. State verification schedule for means measuring magnetic field intensity within the frequency range from 0,000005 to 1000 MHz
GOST R 56510-2015 Metrological assurance in the field of non-destructive testing
GOST 12637-1967 High frequency magnet malleable materials. Testing methods at the range from 200 to 2000 mc
GOST R 57639-2017 Fire safety engineering. Validation and verification of calculation methods

German Institute for Standardization

DIN EN ISO 340:2007 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2004); English version of DIN EN ISO 340:2007-06
DIN EN 13087-6:2012 Protective helmets - Test methods - Part 6: Field of vision; German version EN 13087-6:2012
DIN EN ISO 16140-3:2021-06 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021); German version EN ISO 16140-3:2021
DIN EN ISO 16140-4:2020-12 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020); German version EN ISO 16140-4:2020

Korean Agency for Technology and Standards (KATS)

KS K 0592-2016 Test method for water resistance of coated cloth：High range, hydrostatic pressure method
KS K 0592-2022 Test method for water resistance of coated fabrics: High range,hydrostatic pressure method
KS C 0304-1-2020 Test method of magnetic shielding effectiveness in SLF range

SCC

AASHTO T 67-2005 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
BS ISO 9022-1:1994 Optics and optical instruments. Environmental test methods-Definitions, extent of testing
NS-EN 13124-2:2004 Windows, doors and shutters — Explosion resistance — Test method — Part 2: Range test
DANSK DS/ISO 12828-2:2016 Validation methods for fire gas analyses -- Part 2: Intralaboratory validation of quantification methods
DANSK DS/ISO 16140-3:2021 Microbiology of the food chain â€” Method validation â€” Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
DANSK DS/IEC TR 62935:2016 Measurement methods – High dynamic range video
DANSK DS/ISO 16140-4:2020 Microbiology of the food chain – Method validation – Part 4: Protocol for method validation in a single laboratory
BS 1610-1:1950 Verification of testing machines. Methods of load verification verification tensile and compression testing

CEN - European Committee for Standardization

EN 13087-6:2000 Protective Helmets - Test Methods - Part 6: Field of Vision (Incorporates Amendment A1: 2001)

Japanese Industrial Standards Committee (JISC)

JIS K 0064:1992 Test methods for melting point and melting range of chemical products
JIS A 1216:2009 Method for unconfined compression test of soils
JIS Z 3198-1:2003 Test methods for lead-free solders -- Part 1: Methods for measuring of melting temperature ranges
JIS Z 3198-1:2014 Test methods for lead-free solders.Part 1: Methods for measuring of melting temperature ranges

CZ-CSN

CSN 25 3308-1980 Block gauges. Methods of verification
CSN 25 7205-1981 Piston gauges. Method* of verification

Association Francaise de Normalisation

NF EN ISO 18063-2:2021 All-terrain trucks - Visibility test methods and their verification - Part 2: rotating all-terrain trucks with variable reach
NF P20-543*NF EN 13124-2:2004 Windows, doors and shutters - Explosion resistance - Test method - Part 2 : range test.
NF ISO 12828-2:2020 Validation method for fire gas analyzes - Part 2: intralaboratory validation of quantification methods
NF EN ISO 16140-3:2021 Microbiology of the food chain - Validation of methods - Part 3: protocol for the verification in a single laboratory of validated reference methods and alternative methods
NF X65-040-2*NF ISO 12828-2:2020 Validation method for fire gas analysis - Part 2 : Intralaboratory validation of quantification methods
NF V08-103-4*NF EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4 : protocol for method validation in a single laboratory
NF EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: protocol for method validation in a single laboratory
NF V08-103-5*NF EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 4 : protocol for method validation in a single laboratory
NF S10-030:2012 Optics and photonics - Environmental test methods - Part 1 : definitions, extent of testing.
NF C97-909:2008 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz.

PL-PKN

PN C05011 ArkusZ01-1971 Test methods of conveyer belts General re?uirements and scope of the standard
PN A79528-01-1992 Spirit (ethyl aJcohol) Methods of tests Rang? of tests and genera? principles
PN C82055 ArkusZ00-1974 Test methads oi pressed carfoom praduobs Genera? re?uiremenits and stop? of the standard

US-CFR-file

CFR 46-189.25-10-2014 Shipping. Part189:Inspection and certification. Section189.25–10:Scope of inspection.

Spanish Association for Standardization (UNE)

UNE-EN 13124-2:2004 Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test
UNE-EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
UNE-EN ISO 16140-4:2021 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)

KR-KS

KS V 8890-2019(2024) Dynamic range measurement test procedure of frequency analysis system for ships
KS M ISO 6299-2003(2023) Petroleum products - Dropping point test method for lubricating grease (wide temperature range)
KS B ISO 9022-1-2023 Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing

Danish Standards Foundation

DS/EN 13124-2:2004 Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test
DS/ISO 16140-3:2021 Microbiology of the food chain â€” Method validation â€” Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
DS/EN ISO 16140-3:2021 Microbiology of the food chain – Method validation – Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)

Lithuanian Standards Office

LST EN 13124-2-2004 Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test

CU-NC

NC 90-14-01-1985 Metrologlcal Assurance. Working Resistcince Thermometers. Verificatlon Methods and Means
NC 90-11-13-1987 Metrological Assurance. Installations to Verify Clocks. Methods and Means of Verification
NC 90-01-05-1987 Metrological Assurance. Sphere Indicator with 0,01 Division Value. Methods and Means of Verification
NC 90-03-01-1986 Metrological Assurance Square and Bar Levels Verification Methods and Means

American National Standards Institute （ANSI)

ANSI/ASTM D7398:2007 Test Method for the Boiling Range Distribution of Fatty Acid Methyl Esters (fame) in the Boiling Range from 100 to 615 C by Gas Chromatography
ANSI/SCTE 34-2010 Test Method for Cored Depth Verification

International Electrotechnical Commission (IEC)

IEC TR 62935:2016 Measurement methods - High dynamic range video

GOST

GOST R 8.763-2011 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of length in the range from 1·10-9 to 50 m and wavelength in the range from 0, 2 to 50 µm

AT-ON

ONORM S 5280-1-1998 Radon - Measuring methods and their r?nge of applications

ETSI - European Telecommunications Standards Institute

EG 201 015-2012 Methods for Testing and Specification (MTS); Standards engineering process; A Handbook of validation methods (V2.1.1)
EG 201 015-2011 Methods for Testing and Specification (MTS); Standards engineering process; A Handbook of validation methods (V2.1.1)

GOSTR

GOST 8.536-1985 State system for ensuring the uniformity of measurements. State verification schedule for means measuring of the coating thickness in the range of 1 to 20000 um
GOST 8.537-1985 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the surface coating density in the range of 0,001-1,000 kg/m2

Compressed Gas Association (U.S.)

CGA M-6-2013 Guideline for analytical method volidation

GSO

GSO ISO 12828-2:2021 Validation method for fire gas analysis — Part 2: Intralaboratory validation of quantification methods
BH GSO ISO 12828-2:2022 Validation method for fire gas analysis — Part 2: Intralaboratory validation of quantification methods
OS GSO 1637:2002 Methods for load verification of tensile testing machines

Standard Association of Australia （SAA）

AS 2701.1:1984 Methods of sampling and testing mortar for masonry construction - Scope and general
AS 2300.8.1:1983 Methods of chemical and physical testing for the dairying industry, Method 8.1: Anhydrous milk fat - Scope and general requirements

European Telecommunications Standards Institute (ETSI)

ETSI ETR 171-1995 Methods for Testing and Specification (MTS); Proforma for Scoping Reports

IN-BIS

IS 1828-1975 Tensile testing machine load verification method