Fiber composite anchorage national standard

Fiber composite anchorage national standard, Total:349 items.

The international standard classification for "Fiber composite anchorage national standard" includes: Reinforced plastics , Networking , Rolling, extruding and drawing equipment , Steel bars and rods , Yarns , Products in fibre-reinforced cement , Other construction materials , Road construction materials , Materials for aerospace construction , Other materials .

The Chinese standard classification for "Fiber composite anchorage national standard" includes: Fibre reinforced composites , Special carbon material , Mould , Profile steel and deformed steel , Asbestos material , Highway engineering , Hot processing technology , Composite materials and solid fuels .

Group Standards of the People's Republic of China

T/CECS 10163-2021 Fiber reinforced polyurethane composite pole tower
T/GDC 105-2021 Hydraulic abrasion resistant inorganic high performance fiber composites
T/CIA B001-2019 Technical specification for strengthening and repair of chemical engineering pipework with carbon fiber reinforced polymer composties
T/CITS 364-2025 Technical Specification for Recycling of Carbon Fiber Composite Material (CFRP) Waste
T/CASMES 131-2022 Bamboo fiber composite corrugated pipe
T/CSAA 9-2021 Numerical simulation methods of cure-induced deformation for continuous fiber-reinforced polymer-matrix composites
T/TMAC 127-2025 Technical specifications for fiber-reinforced composite anti-glare fences
T/CRRA 9902-2020 Technical specification for pyrolysis regeneration of waste carbon fiber composites
T/CSRA 2-2020 Phenolic resin for fibre reinforcement composite
T/COS 018-2024 Specification for carbon fiber reinforced polymer based composite ladder
T/SDAS 218-2021 Fibre reinforced polymer bars for hydraulic engineering
T/GDBX 038-2021 Carbon fiber composite wing fender for passenger cars
T/CIA 0009-2024 Fiber composite spiral rib reinforced pipes
T/GDC 103-2021 Inorganic high performance fiber composite panel for sound insulation wall
T/CSTM 00339-2021 Materials for underwater glass fiber composite sleeve system
T/CACE 078-2023 Recycled carbon fibre polytetrafluoroethylene composites for wear-resistant
T/SCSKJQYLHH 23-2024 Basalt fiber composite photovoltaic bracket
T/CSRA 9-2021 Preparation of aramid fiber III reinforced materials for test purposes
T/CIET 657-2024 Technical requirements for chopped carbon fiber and glass fiber reinforced polyetheretherketone composites
T/GDC 90-2021 High performance fiber reinforced inorganic composite mixtures
T/CIA 0010-2025 Basalt fiber composite bicycle frame set
T/CECS 146-2022 Technical specifications for strengthening concrete structures with carbon fiber reinforced composite materials
T/CSAE 209-2021 Technical requirements of vehicle hood with continuous carbon fiber reinforced polymer reinforced thermosetting plastics
T/CRRA 9901-2020 Coding rules for waste carbon fiber composites
T/CIET 482-2024 Technical requirements for carbon fiber composite graphite felt products
T/JSQA 125-2022 Glass fiber braids for composites
T/SZZX 005-2019 Carbon fiber composites watch cases
T/QGCML 4297-2024 Composite materials, fiber-reinforced composite materials, preform temperature compensation curing molding process specifications
T/AJB 010-2022 Technical Regulations for Strengthening Concrete Structures with Fiber Reinforced Composite Materials
T/CECS 10112-2020 Anchors and clamps for prestressed fiber reinforced composites
T/TMAC 038-2021 Technical specification for basalt fiber composite plastic mould
T/CASME 159-2022 Outdoor bamboo based fiber composite
T/CIET 1165-2025 Technical specifications for carbon fiber composite materials for aviation interiors
T/CSCM 01-2021 Fiber winding composite pole

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 45006-2024 Pultruded fiber reinforced polymer composite planks for wind turbine blades
GB/T 39549-2020 Fiber reinforced thermosetting composites septic tank
GB/T 31539-2015 Pultruded fiber reinforced polymer composites structural profiles
GB/T 26745-2021 Basalt fiber composites for civil engineering structures
GB/T 26743-2011 Fiber reinforced composite bars for civil engineering
GB/T 45755-2025 Pultruding moulds for fiber reinforced polymer composite plates
GB/T 36262-2018 Fiber reinforced polymer composite grids for civil engineering
GB/T 30967-2014 Practice for fiber reinforcement orientation codes for composite materials
GB/T 29552-2013 Fibre reinforced plastics composites bridge decks
GB/T 21490-2008 Carbon fiber sheet for strengthening and restoring structures
GB/T 35156-2017 Fiber reinforced polymer composites structural cables
GB/T 39041-2020 Carbon steel-fiber reinforced plastic clad bars for reinforcement concrete
GB/T 29324-2024 Carbon fiber reinforced composite core for overhead electrical conductors
GB/T 31539-2015(英文版) Pultruded fibre reinforced polymer composites structural profiles
GB/T 26744-2011 Glass fiber sheet for strengthening and restoring structures
GB/T 40724-2021 Terminology for carbon fiber and carbon fiber composites
GB/T 43116-2023 Fibre-reinforced plastic composites—Standard qualification plan (SQP) for composite materials,including reduced qualification plan (RQP) and extended qualification plan (EQP) schemes
GB/T 45467-2025 Fiber reinforced polymer composite tubes for confining concrete
GB/T 32376-2015 Elastic constants test method for fibre reinforced composites
GB/T 26745-2011 Basalt fiber composites for strengthening and restoring structures
GB/T 45011-2024 Test method for impact failure of fiber reinforced polymer matrix composites

Anhui Provincial Standard of the People's Republic of China

DB34/T 1694-2012 Fiber Reinforced Plastic (FRP) Bolt Forming Equipment

Professional Standard - Building Materials

JC/T 2736-2023 Classification and management guidelines for solid waste from fiber reinforced plastics
JC/T 2006-2021 Composite fiber for friction materials
JC/T 988-2023 Fiber reinforced composites conduits for cable
JC/T 2865-2024 Ductile fiber reinforced cementitious composites
JC/T 2827-2024 Technical specification for waste fiber composite materials recycling
JC/T 2486-2018 Automatic hydraulic press of fiber-reinforced composite material
JC/T 2362-2016 Fiber-reinforced composite material hydraulic pultrusion machine
JC/T 2510-2019 Fiber reinforced composite insulation board
JC/T 2006-2010 Composite fiber for friction materials
JC/T 2580-2020 Fiber-reinforced composite material caterpillar pultrusion machine

Professional Standard - Ferrous Metallurgy

YB/T 4558-2016 Technical specification for strengthening steel structures with fiber reinforced polymer

Professional Standard - Construction Industry

JG/T 167-2016 Carbon Fiber Laminate for Strengthening and Restoring Structures
JG/T 351-2012 Fiber reinforced composites standard
JG/T 167-2004 Carbon fiber laminate for strengthening and restoring structures
JG/T 364-2012 Fiber-reinforced Composite Grids

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1878-2016 Inorganic high-performance fiber composite drainage pipe
DB44/T 1609-2015 Inorganic high-performance fiber composite inspection manhole cover
DB44/T 1877-2016 Inorganic high-performance fiber composite power support
DB44/T 1608-2015 Inorganic High Performance Fiber Composite Materials

Military Standard of the People's Republic of China-General Armament Department

GJB 392A-2018 Specification for fiberglass composite gas cylinders for aviation use
GJB 2637-1996 Fatigue test method for carbon fiber resin matrix composite laminates
GJB 10062-2021 Specification for low thermal conductivity fiber reinforced ceramic matrix composite fasteners
GJB 9383-2018 Specification for carbon fiber composite gas cylinders for aerospace use
GJB 9460-2018 Specification for carbon fiber composite cylinders for aviation use
GJB 2895-1997 General specification for carbon fiber composite laminates and laminates
GJB 9384-2018 Specification for carbon fiber composite storage tanks for aerospace use

Professional Standard - Petroleum

SY/T 6585-2003 Carbon fibre composite continuous sucker rod

Hebei Provincial Standard of the People's Republic of China

DB13/T 1708-2013 Carbon Fiber Composite Material Core Aerial Conductor

Professional Standard - Traffic

JT/T 531-2004 Aramid fiber reinforced composites for bridge structures

Professional Standard - Machinery

JB 4060-1991 Mylar polyester fiber nonwoven soft composite material
JB/T 4062.1-1995 Soft composite materials Polyimide film aromatic polyamide fiber paper soft composite materials
JB/T 4061.1-1995 Soft composite materials Polyester film aromatic polyamide fiber paper soft composite materials

Professional Standard - Aviation

HB/Z 189-1991 Carbon fibre composite member holing process
HB 6740-1993 Opening Tensile Test for Carbon Fibre Composite Laminated Wood
HB 7624-1998 Test Method for Bending Fatigue of Carbon Fibre Composite Laminated Wood
HB 6739-1993 Compression Test for Carbon Fibre Composite Laminated Wood After Impacting
HB 6741-1993 Opening Compression Test for Carbon Fibre Composite Laminated Wood

Professional Standard - Energy

NB/T 11022-2022 Carbon fiber reinforced polymer matrix composite stranded core for overhead electrical conductors
NB/T 11023-2022 Overhead electrical stranded conductors with stranded carbon fiber composite core supported/reinforced

Shanxi Provincial Standard of the People's Republic of China

DB14/T 1722-2018 Technical Requirements for Durability Application of Carbon Fiber Composite Sheets for Bridge Reinforcement

Professional Standard - Aerospace

QJ 2808-1996 Specifications for Three-way Quartzfibre Composite Product
QJ 3074-1998 Test Method for Resistivity of Carbon Fiber and Composite Material

Professional Standard - Textile

FZ/T 64108-2023 Hemp fiber for reinforcement of needle-punched nonwoven composites

Hubei Provincial Standard of the People's Republic of China

DB42/T 1937-2022 Technical specification for strengthening masonry structures with high ductility fiber reinforced cement-based composite materials

Ministry of Housing and Urban-Rural Development of the People's Replublic of China

GB 50608-2020 Technical standard for fiber reinforced polymer (FRP) in construction

Shandong Provincial Standard of the People's Republic of China

DB37/T 2534-2014 Plant fiber and plastic composite decorative profile production line

Professional Standard - Energy and Power Planning

DL/T 1615-2016 Technical Guide for Operation and Maintenance of Carbon Fibre Composite Cores Overhead Lines

U.S. Military Regulations and Norms

ARMY MIL-HDBK-754-1991 PLASTIC MATRIX COMPOSITES WITH CONTINUOUS FIBER REINFORCEMENT
ARMY MIL-M-55220 A NOTICE 1-1996 MAST AB-577()/1GRC
ARMY MIL-M-55220 A-1973 MAST AB-577()/1GRC

International Organization for Standardization (ISO)

ISO/CD 19375:2024 Fibre-reinforced composites
ISO 8060:2024 Composites and reinforcements fibres
ISO/CD 12817:2024 Fibre-reinforced plastic composites
ISO/CD 12815:2024 Fibre-reinforced plastic composites
ISO/CD 13094:2024 Composites and reinforcement fibres
ISO/FDIS 8060:2023 Composites and reinforcements fibres
ISO 14127:2024 Carbon-fibre-reinforced composites - Determination of the resin, fibre and void contents
ISO/DIS 14127:2023 Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
ISO/FDIS 14127:2024 Carbon-fibre-reinforced composites-Determination of the resin, fibre and void contents
ISO 23523:2021 Test methods for discrete polymer fibre for fibre-reinforced cementitious composites
ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
ISO 14127:2008 Carbon-fibre-reinforced composites - Determination of the resin, fibre and void contents
ISO 13094:2025 Composites and reinforcement fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Combined stress test
ISO 22821:2021 Carbon-fibre-reinforced composites - Determination of fibre weight content by thermogravimetry (TG)
ISO 12817:2012 Fibre-reinforced plastic composites - Determination of open-hole compression strength
ISO/DIS 19044:2024 Test methods for fibre-reinforced cementitious composites
ISO 12817:2013 Fibre-reinforced plastic composites - Determination of open-hole compression strength
ISO/DIS 12817:2024 Fibre-reinforced plastic composites-Determination of open-hole compression strength

American Society for Testing and Materials (ASTM)

ASTM STP 636-1977 Fatigue of filamentary composite materials
ASTM STP 772-1982 Short Fiber Reinforced Composite Materials
ASTM STP 427-1967 Fiber-Strengthened Metallic Composites
ASTM STP 723-1981 Fatigue of fiber reinforced composites
ASTM D6507-19(2025) Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
ASTM STP 497-1972 Fiber Composites: Testing and Design (Session 2)
ASTM C1355/C1355M-96(2020) Standard Specification for Glass Fiber Reinforced Gypsum Composites
ASTM C1355/C1355M-96 Standard Specification for Glass Fiber Reinforced Gypsum Composites
ASTM C1355/C1355M-25 Standard Specification for Glass Fiber Reinforced Gypsum Composites
ASTM C1355/C1355M-96(2001) Standard Specification for Glass Fiber Reinforced Gypsum Composites
ASTM STP 521-1973 Test Methods for Analyzing High Modulus Fibers and Composites
ASTM D7332/D7332M-07e1 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

German Institute for Standardization

DIN 7735-2:1970 Types of paper-based composites, fiber-based composites and glass cloth-based composites
DIN CEN/TS 17158:2018*DIN SPEC 68158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material
DIN CEN/TS 17158:2018-06*DIN SPEC 68158:2018-06 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material; German version CEN/TS 17158:2018
DIN 65586 E:1994-11 Aerospace fibre reinforced plastics - fatigue strength behaviour of fibre composite materials under one-stage loading
DIN EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
DIN EN 15534-5:2019 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German and English version prEN 15534-5:2019
DIN EN 15534-6 E:2014-03 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
DIN EN 15534-4 E:2012 Draft Document - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC)) or natural fibre composites (NFC) - Part 4: Specifications for decking profiles and tiles; German version prEN 15534-4:2012
DIN EN 15534-5 E:2019 Draft Document - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German and English version prE...
DIN EN 15534-5:2019-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German and English version prEN 15534-5:2019 / ...
DIN EN 15534-5 E:2019-02 Draft Document - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German and English version prE...
DIN EN 15534-6:2018-01 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements; German version EN 15534-6:2015+A1:2017
DIN EN 15534-4:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles; German version EN 15534-4:2014
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
DIN EN 16245-3:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre; German version EN 16245-3:2013
DIN EN 15534-1:2018-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:...
DIN EN 15534-1 E:2012-09 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
DIN EN 15534-5:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014 / Note: To be re...
DIN EN 15534-5 E:2012-09 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
DIN EN 15534-4 E:2012-09 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
DIN EN 15534-6 E:2014 Draft Document - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and systems; German version prEN 15534-6:2014
DIN EN 16245-3 E:2011-03 Draft Document - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre; German version prEN 16245-3:2011
DIN EN 16245-3 E:2011 Draft Document - Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre; German version prEN 16245-3:2011
DIN EN 15534-1/A1 E:2017 Draft Document - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German and Englis...
DIN EN 15534-1/A1 E:2017-03 Draft Document - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German and Englis...
DIN 65583:1999-04 Aerospace - Fibre reinforced materials - Determination of glass transition of fibre composites under dynamic load
DIN EN 15534-1 E:2012 Draft Document - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version pr...
DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
DIN EN 3783 E:1992-11 Aerospace series - Fibre composite materials - Normalization of fibre dominated mechanical properties
DIN EN 15534-6:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements (includes Amendment A1:2017)
DIN EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles; German version EN 15534-4:2014
DIN EN 15534-6 A1 E:2017-03 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fiber composites (NFC)) — Part 6: Specifications for fencing profiles and elements
DIN EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014
DIN 61210:1982 Fibrous webs, bonded webs (felts, nonwoven fabrics, wadding and quilting material) and composite formed fabrics based on textile fibres; technological classification
DIN EN 3783:2013-12 Aerospace series - Fibre composite materials - Normalization of fibre dominated mechanical properties; German and English version EN 3783:2013

British Standards Institution (BSI)

PD CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material
BS PD CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)). Determination of particle size of lignocellosic material
BS EN 16245-3:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fibre
BS EN 15534-1:2014+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
BS EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Test methods for characterisation of compounds and products
BS EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for fencing profiles and elements
BS EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for decking profiles and tiles
BS EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
12/30266170 DC BS EN 15534-1. Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Test methods for characterisation of compounds and products
BS EN 15534-6:2015+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for fencing profiles and elements
12/30266176 DC BS EN 15534-5. Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
25/30474059 DC BS ISO 13182 Classification for discrete polymer fibre for fibre-reinforced cementitious composites
12/30266173 DC BS EN 15534-4. Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for decking profiles and tiles
BS ISO 14127:2024 Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents
BS ISO 14127:2008 Carbon-fibre-reinforced composites - Determination of the resin, fibre and void contents
19/30384123 DC BS EN 15534-5. Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5. Specifications for cladding profiles and tiles
BS EN ISO 14125:1998+A1:2011 Fibre-reinforced plastic composites. Determination of flexural properties
BS EN ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
BS ISO 13094:2025 Composites and reinforcement fibres. Carbon fibre reinforced plastics (CFRPs) and metal assemblies. Combined stress test
BS EN 16210:2013 Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment
BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
BS EN 16245-1:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. General requirements
BS ISO 23930:2023 Fibre-reinforced plastic composites. Full-section compressive test for pultruded profiles
23/30449728 DC BS ISO 14127. Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents
BS EN 12575:1998 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
20/30383022 DC BS ISO 23523. Test methods for discrete polymer fibre for fibre-reinforced cementitious composites
BS ISO 22821:2021 Carbon-fibre-reinforced composites. Determination of fibre weight content by thermogravimetry (TG)
BS ISO 12815:2013 Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
BS ISO 12817:2025 Fibre-reinforced plastic composites. Determination of open-hole compression strength

Gosstandart of Russia

GOST R 57970-2017 Carbon composites. Carbon composites reinforced with carbon fiber. Classification
GOST R 58016-2017 Ceramic composites. Silicon carbide composites reinforced with silicon carbide fiber. Classification
GOST 33846-2016 Polymer composites. Methods for determination of resins, fibers and voids in carbon composite
GOST R 57730-2017 Polymer composites. Determination of fibre length in the glass-fibre-reinforced products
GOST R 57755-2017 Polymer composites. Prepregs. Determination of the degree of fibre wetting
GOST R 56656-2015 Metal composites. Method for determination of tensile properties of fiber reinforced metal matrix composites
GOST R 57858-2017 Polymer composites. Method for determination of fiber volume fraction and fiber distribution in polymer matrix
GOST 34367.2-2017 Polymer composites. Acquisition and presentation of comparable numerical property data for long-fibre-reinforced composites
GOST R EN 40-7-2013 Fibre reinforced polymer composite of lighting columns. Technical specifications

Standards Norway

SN-CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) — Determination of particle size of lignocellosic material
NS-EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fiber composites (NFC)) - Part 6: Specifications for fencing profiles and elements
NS-EN 15534-6:2015+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
NS-EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
NS-EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
NS-EN 13421:2006 Plastics — Thermoset moulding compounds — Composites and reinforcement fibres — Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
NS-EN 16245-3:2013 Fibre-reinforced plastic composites — Declaration of raw material characteristics — Part 3: Specific requirements for fibre
NS-EN 15534-1:2014+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
NS-EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
NS-EN 3783:2013 Aerospace series — Fibre composite materials — Normalisation of fibre dominated mechanical properties

Danish Standards Foundation

DANSK DS/CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fiber composites (NFC)) – Determination of particle size of lignocellosic material
DANSK DS/EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
DANSK DS/EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
DANSK DS/EN 15534-6+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) – Part 6: Specifications for fencing profiles and elements
DANSK DS/EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
DANSK DS/EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
DS/EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
DANSK DS/EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
DS/EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
DANSK DS/EN ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
DANSK DS/EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) – Part 1: Test methods for characterisation of compounds and products
DANSK DS/EN 15534-1+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) – Part 1: Test methods for characterisation of compounds and products
DS/EN ISO 14125:1999 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/Corr.1:2002 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN 3783:2013 Aerospace series - Fibre composite materials - Normalisation of fibre dominated mechanical properties
DANSK DS/EN 3783:2013 Aerospace series - Fibre composite materials - Normalisation of fibre dominated mechanical properties

Ente Nazionale Italiano di Unificazione

UNI CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material
UNI EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3:Specific requirements for fibre
UNI EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
UNI EN 15534-6:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
UNI EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
UNI ISO 14127:2024 Carbon-fibre-reinforced composites - Determination of the resin, fibre and void contents
UNI EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
UNI EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
UNI 9897-4:1992 Carbon fibres for advanced composites. Determination of filament diameter.
EC 1-2004 UNI EN ISO 14125:2000 Fibre-reinforced plastic composites - Determination of flexural properties
UNI EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
UNI EN 3783:2014 Aerospace series - Fibre composite materials - Normalisation of fibre dominated mechanical properties
UNI 9897-5:1992 Carbon fibers for advanced composite materials. Determination of sizing content
UNI 9897-7:1992 Carbon fibres for advanced composites. Determination of tensile properties.
UNI 9897-6:1992 Carbon fibres for advanced composites. Determination of yarn twist.

Canadian Standards Association (CSA)

CSA C116-2018(R2023) Fibre-reinforced polymer composite crossarms
CSA C116-2018 Fibre-reinforced polymer composite crossarms

Society of Automotive Engineers (SAE)

SAE AMS3892A Fibers, Carbon Tow and Yarn, for Structural Composites
SAE AMS3892 Fibers, Carbon Tow and Yarn, for Structural Composites
SAE AMS3892B Fibers, Carbon Tow and Yarn, for Structural Composites
SAE AMS3892C Fibers, Carbon Tow and Yarn, for Structural Composites
SAE AMS3892B-1992 Fibers, Carbon, Tow and Yarn for Structural Composites
SAE T-124-2011 Automotive Carbon Fiber Composites From Evolution to Implementation
SAE AMS3902-1974 CLOTH, ORGANIC FIBER, HIGH MODULUS For Structural Composites
SAE AMS3902A-1977 CLOTH, ORGANIC FIBER, HIGH MODULUS For Structural Composites
SAE AMS3960 Advanced Composites Prepreg - Nominal 250 °F Cure - Carbon Fiber and Epoxy Resin, Unidirectional Tape
SAE AIR6292 Guidelines for Bonded Repair Process Evaluation of Fiber Reinforced Composite Structure
SAE AIR6292-2024 Guidelines for Bonded Repair Process Evaluation of Fiber Reinforced Composite Structure
SAE AMS3960A Advanced Composites Prepreg - Nominal 250 °F Cure - Carbon Fiber and Epoxy Resin, Unidirectional Tape

Military Standards (MIL-STD)

MIL MIL-PRF-47257F-2010 Compound, Epoxy, Filament Winding
MIL MIL-PRF-47257E-2004 COMPOUND, EPOXY, FILAMENT WINDING (SUPERSEDING MIL-PRF-47257D)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 23523:2024 Test methods for discrete polymer fibre for fibre-reinforced cementitious composites
BH GSO ISO 14127:2016 Carbon-fibre-reinforced composites - Determination of the resin, fibre and void contents

Association Francaise de Normalisation

NF ISO 15024:2002 Fiber-reinforced plastic composites - Determination of the mode I interlaminar fracture toughness, Gic, of polymer matrix composite materials reinforced with unidirectional fibers
NF EN 15534-4:2014 Composites based on cellulosic materials and thermoplastics (commonly known as wood-polymer composites (WPC) or natural fiber composites (NFC)) - Part 4: specifications relating to boards and slabs for decking
NF T58-300-6/IN1*NF EN 15534-6/IN1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6 : specifications for fencing profiles and elements
NF T58-300-6*NF EN 15534-6+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 6 : Specifications for fencing profiles and elements
NF T58-300-5*NF EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5 : specifications for cladding profiles and tiles
NF EN 15534-1/IN1:2018 Composites based on cellulosic materials and thermoplastics (commonly called wood-polymer composites (WPC) or naturally occurring fiber composites (NFC)) - Part 1: Test methods for the characterization of compositions and...
NF T58-300-4*NF EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4 : specifications for decking profiles and tiles
NF EN 15534-6/IN1:2018 Composites based on cellulose materials and thermoplastics (commonly called wood-polymer composites (WPC) or natural fiber composites (NFC)) - Part 6: Specifications relating to profiles and elements for fencing
NF EN 15534-1+A1:2018 Composites based on cellulosic materials and thermoplastics (commonly called wood-polymer composites (WPC) or naturally occurring fiber composites (NFC)) - Part 1: Test methods for the characterization of compositions and...
NF EN 15534-6+A1:2018 Composites based on cellulose materials and thermoplastics (commonly known as wood-polymer composites (WPC) or natural fiber composites (NFC)) - Part 6: Specifications for profiles and elements for fencing
NF EN 16245-3:2013 Fiber-reinforced plastic composites - Declaration of raw material characteristics - Part 3: special requirements for fibers
NF EN 13421:2006 Plastics - Thermoset molding compositions - Composites and reinforcing fibers - Preparation of specimens to determine anisotropy properties of compression molding composites
NF T25-501-1:2015 Reinforcement fibers - Flax fibers for plastic composites - Part 1: terminology and characterization of flax fibers
NF T58-300-1/IN1*NF EN 15534-1/IN1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : Test methods for characterisation of compounds and products
NF EN 15534-5:2014 Composites based on cellulose materials and thermoplastics (commonly called wood-polymer composites (WPC) or natural fiber composites (NFC)) - Part 5: specifications relating to strips and plates for cladding and the...
NF T57-120-3*NF EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3 : specific requirements for fibre
NF T58-300-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : test methods for characterisation of compounds and products
NF T58-300-1*NF EN 15534-1+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : Test methods for characterisation of compounds and products
NF T25-501-3:2015 Reinforcement fibers - Flax fibers for plastic composites - Part 3: determination of the tensile properties of technical fibers
NF T25-501-2:2015 Fibres de renfort - Fibres de lin pour composites plastiques - Partie 2 : détermination des propriétés en traction des fibres élémentaires
NF EN ISO 14125:1998 Fiber Reinforced Plastic Composites – Determination of Flexural Properties
NF L17-490*NF EN 3783:2015 Aerospace series - Fibre composite materials - Normalisation of fibre dominated mechanical properties
NF T57-105*NF EN ISO 14125:1998 Fibre-reinforced plastic composites. Determination of flexural properties.
NF T57-200:1973 Pipes and fittings of composite glass. Thermosetting materials. General review. Description. Classification. Characteristics.
NF EN ISO 14126:2000 Fiber-reinforced plastic composites - Determination of in-plane compressive characteristics

Spanish Association for Standardization (UNE)

AENOR UNE-EN 15534-6+A1:2018 Composites based on cellulose and thermoplastic materials [commonly called wood-plastic composites (WPC) or natural fibre composites (NFC)]. Part 6: Specifications for profiles and fencing elements.
UNE-EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
UNE-EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
UNE-EN 16245-3:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
UNE-EN 15534-6:2016+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
AENOR UNE-EN 16245-3:2014 Fiber-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fiber
AENOR UNE-EN 15534-6:2016 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fiber composites (NFC)) - Part 6: Specifications for fencing profiles and elements
AENOR UNE-EN 13421:2006 Plastics - Thermoset molding compounds - Composites and reinforcement fibers - Preparation of specimens for determining the anisotropy of the properties of compression molding composites
UNE-CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material (Endorsed by Asociación Española de Normaliz...
UNE-EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
UNE-EN ISO 14125/AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties. (ISO 14125:1998/Cor. 1:2001)
UNE-EN 15534-1:2014+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
AENOR UNE-EN 15534-1+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fiber composites (NFC)) - Part 1: Test methods for characterization of compounds and products
UNE-EN 3783:2013 Aerospace series — Fibre composite materials — Normalisation of fibre dominated mechanical properties (Endorsed by AENOR in October of 2013.)

National Aeronautics and Space Administration (NASA)

NASA-CR-2057-1972 Tensile failure criteria for fiber composite materials

CEN - European Committee for Standardization

PREN 15534-5-2019 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles

Association of German Mechanical Engineers

VDI 2014 Blatt 3-1997 Development of FRP components (fibre reinforced plastics) - Calculation
VDI 2014 BLATT 3-2006 Development of components made of fibre-reinforced plastics — calculations
VDI 2014 BLATT 1-1989 Development of components made of fibre-plastic composites; basics

American Water Works Association (AWWA)

AWWA ACE54245 Rehabilitation of 78-inch PCCP With Carbon Fiber Reinforced Composite Material

Swedish Institute for Standards

SS-EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
SS-EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
SS-EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
SS-EN 3783:2013 Aerospace series - Fibre composite materials - Normalisation of fibre dominated mechanical properties

GCC Standardization Organization

GSO ISO 23523:2024 Test methods for discrete polymer fibre for fibre-reinforced cementitious composites
GSO ISO 14127:2013 Carbon-fibre-reinforced composites - Determination of the resin, fibre and void contents
GSO ISO 14125:2015 Fibre-reinforced plastic composites -- Determination of flexural properties
GSO ISO 12817:2015 Fibre-reinforced plastic composites -- Determination of open-hole compression strength

WRC - Welding Research Council

BULLETIN 207-1975 JOINING OF METAL-MATRIX FIBER-REINFORCED COMPOSITE MATERIALS

European Committee for Standardization (CEN)

EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
EN 16245-4:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
EN 3783:2013 Aerospace series - Fibre composite materials - Normalisation of fibre dominated mechanical properties

ESDU - Engineering Sciences Data Unit

ESDU 84018 D-1995 Failure analysis of fibre reinforced composite laminates.

American Welding Society (AWS)

WRC 207:1975 Joining of Metal-Matrix Fiber-Reinforced Composite Materials

Korean Agency for Technology and Standards (KATS)

KS M ISO 14127-2019 Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
KS M ISO 14127:2019 Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
KS M ISO 14127:2014 Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
KS M ISO 14125-2012(2022) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125:2012 Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125-2012(2017) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125-2022 Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14126-2012(2017) Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction
KS M ISO 14126-2012(2022) Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction

National Association of Corrosion Engineers (NACE)

NACE Paper 13449-2019 Study on the rust-proof mechanism of fiber-reinforced composite materials

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 14127:2013 Carbon-fibre-reinforced composites - Determination of the resin, fibre and void contents
OS GSO ISO 14125:2015 Fibre-reinforced plastic composites -- Determination of flexural properties
OS GSO ISO 12817:2015 Fibre-reinforced plastic composites -- Determination of open-hole compression strength

South African Bureau of Standard

SANS 10349:2004 Fibre-reinforced plastics (FRP) composites - Glossary of technical terms

Lithuanian Standards Office

LST EN 13421-2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites

Japanese Industrial Standards Committee (JISC)

JIS K 7017:1999 Fibre-reinforced plastics composites -- Determination of flexural properties

(U.S.) Ford Automotive Standards

FORD M99G14-A-1991 GROUTING AND ANCHOR BOLT COMPOUND - DRY

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 3783:1992 Aerospace Series Fibre Composite Materials Normalisation of Fibre Dominated Mechanical Properties

IX-IX-ISO

ISO 12817:2025 Fibre-reinforced plastic composites — Determination of open-hole compression strength

Others: