Thermoplastic Rubber Hardness Tester

Thermoplastic Rubber Hardness Tester, Total:261 items.

The international standard classification for "Thermoplastic Rubber Hardness Tester" includes: Rubber , Plastics , Other rubber and plastics products , Equipment for the chemical industry , Rubber and plastics products in general .

The Chinese standard classification for "Thermoplastic Rubber Hardness Tester" includes: Rubber products in general , Basic standards and general methods for synthetic resin and plastic , Other rubber products , Special chemical instrument and meter .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 531.2-2009 Rubber vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
GB/T 25940-2010 IRHD dead-load testers
GB/T 39693.7-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 7:Apparent hardness of rubber-covered rollers by Shore-type durometer method
GB/T 531.1-2008 Rubber vulcanized or thermoplastic - Determination of indentation hardness - Part 1：Duromerer method （Shore hardness）
GB/T 2411-2008 Plastics and ebonite - Determination of indentation hardness by means of a duronmeter(shore hardness)
GB/T 7760-2003 Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method
GB/T 6031-1998 Rubber,vulcanized or thermoplastic-Determination of hardness(hardness between 10 IRHD and 100 IRHD)
GB/T 39693.8-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 8:Apparent hardness of rubber-covered rollers by Pusey and Jones method
GB/T 531-1999 Rubber-Determination of indentation hardness by means of pocket hardness meters
GB/T 23651-2009 Rubber vulcanized or thermoplastic - Hardness testing - Introduction and guide

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers
GB/T 39693.3-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale
GB/T 39693.6-2020 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 6:Apparent hardness of rubber-covered rollers by IRHD method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 6031-2017 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)

Taiwan Provincial Standard of the People's Republic of China

CNS 3555-2008 Methods of test for hardness of rubber,vulcanized or thermoplastic
CNS 3555-1999 "Methods of test for hardness of rubber, vulcanized or thermoplastic"

Professional Standard - Chemical Industry

HG/T 3077-1999 Requirements for hardness of rubber or plastics covered rollers
HG/T 2450-1999 Rubber -- Covered rollers -- Determination of apparent hardness : IRHD method
HG/T 3077-1988 Requirements for hardness of rubber or plastics covered rollers

化学工业部

HG/T 2450-1993 Determination of apparent hardness of rubber rollers International rubber durometer method

British Standards Institution (BSI)

BS ISO 48-4:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS ISO 19979:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS ISO 48-7:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by Shore-type durometer method
BS ISO 48-9:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Calibration and verification of hardness testers
BS ISO 48-3:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Dead-load hardness using the very low rubber hardness (VLRH) scale
BS EN ISO 21509:2015 Plastics and ebonite. Verification of Shore durometers
BS ISO 48-5:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by IRHD pocket meter method
BS ISO 7619-2:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. IRHD pocket meter method
BS EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS ISO 48:2010 Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 21509:2006 Plastics and ebonite - Verification of Shore durometers
BS ISO 27588:2012 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 27588:2009 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 18517:2008 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
BS ISO 18517:2015 Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
17/30335305 DC BS ISO 7619-1. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method (Shore hardness). Part 1: Durometer method (Shore hardness)
BS ISO 48-6:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by IRHD method
17/30291652 DC Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 48-8:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by Pusey and Jones method
BS ISO 48-2:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Hardness between 10 IRHD and 100 IRHD
BS ISO 48-1:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Introduction and guidance

Japanese Industrial Standards Committee (JISC)

JIS K 6253-3:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6253-3:2023 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6253-5:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 5: Calibration and verification of hardness testers
JIS K 6253:2006 Rubber, vulcanized or thermoplastic -- Determination of hardness
JIS K 6253-4:2012 Rubber, vulcanized or thermoplastic.Determination of hardness.Part 4: IRHD pocket meter method
JIS K 6253-2:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 2: IRHD method (hardness between 10 IRHD and 100 IRHD)
JIS K 6253:1997 Hardness testing methods for rubber, vulcanized or thermoplastic
JIS K 6253-1:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 1: General guidance

RO-ASRO

STAS 5441/1-1974 VULCANIZED ELASTOMERES Determination of hardness expressed in International Rubber Hard Degree
STAS SR ISO 868:1995 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

Association Francaise de Normalisation

NF ISO 48-4:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 4: penetration hardness by the durometer method (Shore hardness)
NF T46-003-4*NF ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4 : indentation hardness by durometer method (Shore hardness)
NF T46-052-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1 : durometer method (Shore hardness).
NF T46-003-5*NF ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5 : indentation hardness by IRHD pocket meter method
NF T46-003-9*NF ISO 48-9:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9 : calibration and verification of hardness testers
NF T46-003-7*NF ISO 48-7:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7 : apparent hardness of rubber-covered rollers by Shore-type durometer method
NF T46-052-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2 : IRHD pocket meter method.
NF T46-052:1988 Vulcanized or thermoplastic rubber. Determination of identation hardness by means of type shore pocket hardness meters.
NF EN ISO 868:2003 Plastics and ebonite - Determination of penetration hardness using a durometer (Shore hardness)
NF T46-003-3*NF ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3 : dead-load hardness using the very low rubber hardness (VLRH) scale
NF ISO 48-7:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 7: apparent hardness of rubber-coated cylinders by the Shore type durometer method
NF T51-174:1998 Plastics and ebonite. Determination of identation hardness by means of a durometer (Shore hardness).
NF T46-003:2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD).
NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
NF ISO 48-9:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 9: calibration and verification of durometers
NF T46-003-6*NF ISO 48-6:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6 : apparent hardness of rubber-covered rollers by IRHD method
NF T46-003-2*NF ISO 48-2:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2 : hardness between 10 IRHD and 100 IRHD
NF T51-123*NF EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers
NF EN ISO 21509:2015 Plastiques et ébonite - Vérification des duromètres Shore
NF T46-003-8*NF ISO 48-8:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8 : apparent hardness of rubber-covered rollers by Pusey and Jones method
NF T46-060:2015 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
NF T46-060:2005 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide.
NF T46-003-1*NF ISO 48-1:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 1 : introduction and guidance
NF ISO 48-1:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 1: introduction and guidelines
NF ISO 48-6:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 6: apparent hardness of rubber-coated cylinders by the DIDC method
NF ISO 48-8:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 8: apparent hardness of rubber-coated cylinders by the Pusey and Jones method
NF L17-311*NF EN 2837:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD.
NF L17-013*NF EN 2838:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD
NF ISO 48-2:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 2: hardness between 10 DIDC and 100 DIDC
NF ISO 48-5:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 5: penetration hardness by the pocket durometer method calibrated in DIDC

Korean Agency for Technology and Standards (KATS)

KS M ISO 7619-1-2021 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 7619-1-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 48:2008 Rubber, vulcanized or thermoplastic-Determination of hardness(hardness between 10 IRHD and 100 IRHD)
KS M 6784-2009 Hardness testing methods for rubber, vulcanized or thermoplastic
KS M ISO 7619-2-2021 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M ISO 27588-2021 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 7619-2-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M ISO 21509:2014 Plastics and ebonite — Verification of Shore durometers
KS M ISO 21509-2019 Plastics and ebonite — Verification of Shore durometers
KS M ISO 7619-2:2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M ISO 7619-2:2011 Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 2:IRHD pocket meter method
KS M ISO 868-2021 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M 6784-2014 Hardness testing methods for rubber, vulcanized or thermoplastic
KS M ISO 48-2023 Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
KS M ISO 7619-1:2011 Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 1:Durometer method(Shore hardness)
KS M ISO 7619-1:2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 868-2016(2021) Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 27588:2010 Rubber, vulcanized or thermoplastic-Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 27588:2015 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 18517-2017(2022) Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide
KS M ISO 18517:2017 Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide
KS M ISO 18517:2007 Rubber, vulcanized or thermoplastic－Hardness testing－Introduction and guide
KS M ISO 48:2018 Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)

South African Bureau of Standard

SANS 7619-1:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 1: Durometer method (Shore hardness)
SANS 7619-2:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 2: IRHD pocket meter method
SANS 10048:2009 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SANS 10048:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)

International Organization for Standardization (ISO)

ISO 7619-1:2004 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 48:2007 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 48-9:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers
ISO 48-7:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method
ISO 7619-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 48:1994 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD)
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 21509:2006 Plastics and ebonite - Verification of Shore durometers
ISO 7619-1:2004/Amd 1:2008 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness); Amendment 1: Precision data
ISO 868:1985 Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 27588:2012 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 27588:2008 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 48:1994/Amd 1:1999 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD); Amendment 1
ISO 2783:1975 Ebonite — Determination of hardness by means of a durometer
ISO 48-2:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
ISO 7619-2:2004 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
ISO 48-6:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6: Apparent hardness of rubber-covered rollers by IRHD method
ISO 48-8:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
ISO 18517:2005 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
ISO 18517:2015 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
ISO 48:2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 48:1975 Title missing - Legacy paper document
ISO 48:1974 Title missing - Legacy paper document
ISO 7619:1997 Rubber - Determination of indentation hardness by means of pocket hardness meters
ISO 48-1:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 1: Introduction and guidance
ISO 7619:1986 Rubber; Determination of indentation hardness by means of pocket hardness meters
ISO 2039:1973 Plastics and ebonite — Determination of hardness by the ball indentation method
ISO 11346:2023 Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use
ISO 48:2007/Cor 1:2009 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD); Technical Corrigendum 1

KR-KS

KS M ISO 7619-1-2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 48-4-2024 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)
KS M ISO 48-7-2024 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
KS M ISO 48-5-2024 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 5: Indentation hardness by IRHD pocket meter method
KS M ISO 27588-2015 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 868-2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 48-2018(2023) Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
KS M ISO 48-3-2024 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 3: Dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 7619-2-2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M ISO 48-6-2024 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 6: Apparent hardness of rubber-covered rollers by IRHD method
KS M ISO 48-8-2024 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
KS M ISO 48-2018 Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
KS M ISO 48-1-2024 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 1: Introduction and guidance
KS M ISO 18517-2017 Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide

CZ-CSN

CSN 62 1431-1993 Rubber, plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)

Spanish Association for Standardization (UNE)

UNE-ISO 7619-1:2011 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
UNE-EN ISO 21509:2016 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)
UNE-ISO 48:2008 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)

SCC

BS ISO 7619-1:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS ISO 7619-1:2004+A1:2008 Rubber, vulcanized or thermoplastic. Determination of indentation hardness-Durometer method (Shore hardness)
09/30193391 DC BS ISO 7619-1. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method (Shore hardness)
BS ISO 7619-2:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness-IRHD pocket meter method
BS ISO 27588:2008 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
DANSK DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DANSK DS/ISO 48:2016 Rubber, vulcanized or thermoplastic – Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS EN ISO 868:1998 Plastics and ebonite. Determination of indentation hardness by means of a a durometer (Shore hardness)
NS-EN ISO 21509:2015 Plastics and ebonite — Verification of Shore durometers (ISO 21509:2006)
AENOR UNE-EN ISO 21509:2016 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)
DANSK DS/EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)
NS-EN ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
06/30130350 DC ISO 48. Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
NS-EN ISO 868:1997 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985)
AENOR UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
DIN EN ISO 21509 E:2015 Draft Document - Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006); German version FprEN ISO 21509:2015
04/30110818 DC ISO 18517. Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
DIN ISO 27588 E:2014 Draft Document - Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2012)
DIN ISO 48-4 E:2020 Draft Document - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018); Text in German and English
BS ISO 48:2007 Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 18517:2005 Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
DIN ISO 48 E:2015 Draft Document - Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010); Text in German and English
DIN ISO 7619-1 E:2011 Draft Document - Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)
07/30164021 DC BS ISO 27588. Rubber, vulcanized or thermoset. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale

GSO

OS GSO ISO 27588:2013 Rubber, vulcanized or thermoplastic -- Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
GSO ISO 21509:2013 Plastics and ebonite -- Verification of Shore durometers
GSO ISO 48:2015 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BH GSO ISO 21509:2016 Plastics and ebonite -- Verification of Shore durometers
OS GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
BH GSO ISO 868:2016 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
OS GSO ISO 7619-1:2014 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
GSO ISO 7619-1:2014 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
OS GSO ISO 18517:2014 Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide
GSO ISO 48-9:2021 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers
GSO ISO 27588:2013 Rubber, vulcanized or thermoplastic -- Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BH GSO ISO 48-9:2022 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers
GSO ISO 18517:2014 Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide
GSO ISO 7619-2:2014 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method

German Institute for Standardization

DIN ISO 48:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:1994 + Amd. 1:1999)
DIN ISO 7619-1:2012 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)
DIN ISO 48-4:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN ISO 48-3 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
DIN EN ISO 868:2003-10 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN ISO 48-4 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
DIN EN ISO 21509:2015-10 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006); German version EN ISO 21509:2015
DIN ISO 27588 E:2014-05 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
DIN ISO 48-3:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN ISO 27588:2010-05 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
DIN ISO 48-3:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN EN ISO 21509 E:2015-03 Identification of Shore Hardness Testers for Plastics and Hard Rubbers (Draft)
DIN ISO 48-4:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN ISO 27588:2014 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2012)
DIN ISO 48-9 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers
DIN ISO 7619-2:2012 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method (ISO 7619-2:2010)
DIN ISO 48 E:2015-11 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
DIN ISO 48:2016-09 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
DIN ISO 48-8 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
DIN ISO 48-8:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method (ISO 48-8:2018)
DIN ISO 48-9:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018)

RU-GOST R

GOST R ISO 7619-1-2009 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method of measurement (Shore hardness)
GOST 24621-1991 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST R ISO 7619-2-2009 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 2. IRHD pocket meter method of measurement

Danish Standards Foundation

DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DS/ISO 7619:1989 Rubber. Determination of indentation hardness by means of pocket hardness meters

DIN

DIN ISO 27588:2010 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2008)
DIN ISO 48:2016 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010)

VN-TCVN

TCVN 4502-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer (Shore hardness)

TH-TISI

TIS 2245-2005 Plastics and ebonite.determination of indentation hardness by means of a durometer (shore hardness)

Indonesia Standards

SNI ISO 48:2012 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SNI ISO 18517:2012 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
SNI 06-4999-1999 Determination of hardness of vulcanized rubber by shore durometer

FI-SFS

SFS-ISO 868 E:1986 This standard is approved in English

European Committee for Standardization (CEN)

EN ISO 868:1997 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) ISO 868: 1985
EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN 2838:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD
EN 2839:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD
EN 2836:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD