Dilution Processor

Dilution Processor, Total:342 items.

The international standard classification for "Dilution Processor" includes: Laboratory medicine , Paints and varnishes , Solvents , Special wastes , Radiation measurements , Extraction and processing of petroleum and natural gas .

The Chinese standard classification for "Dilution Processor" includes: Medical laboratory equipment , Coating , Coating auxiliary materials , Specifications for pollution control , Petrochemical and chemical industry engineering , Ionizating Radiation Measurement , Basic standard and general method .

Professional Standard - Medicine

YY 91104-1999 Diluter
YY/T 0456.3-2014 Reagents for hematology analyzer―Part 3:Diluent
YY/T 0456.3-2003 Regents for hematology analyzer use—Part 3:Diluent

Taiwan Provincial Standard of the People's Republic of China

CNS 3233-1980 Dope Thinner
CNS 886-1986 Method of Test for Lacquer Thinner
CNS 554-1986 Lacquer Thinner
CNS 10447-1983 Solvent Diluted Pust Preventive Oil

Group Standards of the People's Republic of China

T/HEBQIA 114-2022 Alkyd thinner
T/CEMIA 019-2019 Thinner for display panels
T/HEBQIA 062-2022 Alkyd thinner
T/QGCML 3254-2024 Mixing device for diluent processing
T/CASME 1483-2024 Specification for the use of diluents of poultry semen

工业和信息化部

HG/T 3378-2022 Thinner for coatings

Professional Standard - Chemical Industry

HG/T 3860-2006 Method of test for evaporation rate of thinners and anti - Blushing agents
HG/T 3379-2003 Thiner for Perchlorvinyl Paint
HG/T 3378-1987 Thinner For Nitrocellulose Lacquer
HG/T 3379-1987 Thinner For Chlorinated Polyvinyl Chloride Paints
HG/T 3380-2003 Thiner for amino paint
HG/T 3378-2003 Thiner for nitrocellulose lacquer
HG/T 3380-1987 Thiner for amino paint
HG/T 3858-2006 Determination of water of thinners and retarders
HG/T 3861-2006 Methods of test for dilution ratio of thinners and anti - Blushing agents

中国石油化工总公司

SH 0354-1992 Solvent-diluted anti-rust oil

Professional Standard - Speciality

ZB G52002-1987 X-3 perchlorethylene paint thinner
ZB G52001-1987 X-1, X-2 nitro lacquer thinner
ZB G52003-1987 X-4 amino paint thinner

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33058-2016 Treatment and disposal method for exhaust gas in producting dilute nitric acid

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1751-1992 Determination of water of thinners and retarders
GB/T 1755-1979 Method of test for coloid ratio of thinnersand anti-blushing agents
GB/T 50815-2013 Technical code of vacuum concentration treatment for weak sulfuric acid

National Metrological Technical Specifications of the People's Republic of China

JJF 1267-2010 Primary method of isotope dilution mass spectrometry
JJF 2066-2023 Calibration Specification for Aerosol Diluters

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 2508-2022 Cashmere Goat Fresh Essence Diluent Formula

未注明发布机构

DIN 12838 E:2020-12 Dilution pipette, Demeter type 1.1
DIN 12839 E:2020-12 Dilution pipette, Demeter type 2.2

Professional Standard - Petroleum

SY/T 6451-2000 Specification for exploring well logging data processing and interpreting technology

Professional Standard - Rare Earth

XB/T 816-2023 Technical specifications for waste water treatment and reuse of rare earth metallurgy
XB/T 815-2023 Technical specifications for waste water treatment and reuse of rare earth mining and beneficiation

Professional Standard - Environmental Protection

HJ 1182-2021 Water quality—Determination of colority—Dilution level method

Professional Standard - Aerospace

QJ 1570.3-1988 842工程

Professional Standard - Energy

NB/T 11150-2023 Geothermal logging data processing and interpretation procedures

Korean Agency for Technology and Standards (KATS)

KS B ISO 8655-4:2017 Piston-operated volumetric apparatus－Part 4：Dilutors
KS B ISO 8655-4-2017(2022) Piston-operated volumetric apparatus－Part 4：Dilutors
KS M 2202-2021 Cutback asphalt
KS M 2202-2016(2021) Cutback asphalt
KS M 2202-2016 Cutback asphalt
KS B ISO 8655-4:2006 Piston-operated volumetric apparatus-Part 4:Dilutors
KS M 5469-1984 Test methods for THE DILUTABILITY and DILUTABILITY stability OF paint
KS M 5803-1983 Thinner for Primer paint
KS M 6060-2005 Thinner for organic coating materials
KS M 6060-2019 Thinner for organic coating materials
KS M 2212-2016(2021) Corrosion preventive oils solvent dilution
KS M 2212-2011 Corrosion preventive oils solvent dilution
KS M 6060-2014 Thinner for organic coating materials
KS M 0120-2009 General rule for dilution methods of standard solutions
KS M 2212-2016 Corrosion preventive oils solvent dilution
KS M 5801-1983 Thinner for synthetic resin enamel
KS M 0120-2019 General rule for dilution methods of standard solutions
KS M 6060-2009 Thinner for organic coating materials
KS M 5802-1983 Thinner for Cashew resin Enamel
KS M 6060-2014(2019) Thinner for organic coating materials
KS Q 16269-2013 Statistical interpretation of data
KS M 5723-1997 THINNER FOR ACRYL RESIN ENAMEL
KS M 5723-1997(2002) THINNER FOR ACRYL RESIN ENAMEL
KS M 5723-2004 THINNER FOR ACRYL RESIN ENAMEL
KS M 5468-1984 Test methods for dilution of components in lacquer
KS M 2257-2007(2022) Testing method for distillation of cut-back asphaltic products
KS M 2257-2022 Testing method for distillation of cut-back asphaltic products

British Standards Institution (BSI)

BS EN ISO 8655-4:2002 Piston-operated volumetric apparatus - Part 4:Dilutors
BS EN ISO 8655-4:2022 Piston-operated volumetric apparatus - Dilutors

KR-KS

KS B ISO 8655-4-2017 Piston-operated volumetric apparatus－Part 4：Dilutors
KS M 2212-2022 Solvent dilution type rust preventive oils

International Organization for Standardization (ISO)

ISO 8655-4:2022 Piston-operated volumetric apparatus — Part 4: Dilutors
ISO 8655-4:2002 Piston-operated volumetric apparatus - Part 4: Dilutors
ISO 8655-4:2002/cor 1:2008 Piston-operated volumetric apparatus - Part 4: Dilutors; Technical Corrigendum 1

(U.S.) Ford Automotive Standards

FORD SK-M14J9561-A-1995 THINNER
FORD ESK-M14J512-A1-1988 THINNER
FORD SK-M14J9550-C-1994 THINNER
FORD SK-M14J9573-B-1994 THINNER
FORD S-M14J4500-A-1994 THINNER
FORD S-M14J210-A-1994 THINNER
FORD SK-M14J9571-A-1994 THINNER
FORD ESK-M14J233-A-1994 THINNER
FORD ESK-M14J250-A-1990 THINNER
FORD SK-M14J9571-B-1994 THINNER
FORD WSK-M14J243-A-1990 THINNER
FORD WSS-M14J519-A-1998 FADE OUT THINNER
FORD M14J200-A-1991 AROMATIC HYDROCARBON THINNERS
FORD WSS-M14J521-A1-1998 PRIMER THINNER
FORD ESK-M14J229-A-1994 THINNER, FOR BASECOAT
FORD WSA-M62J31-A-1992 ENAMEL, WATER REDUCED
FORD WSS-M14J520-A-1998 RETARDER THINNER
FORD M14J100-A-1991 ALIPHATIC HYDROCARBON THINNERS
FORD M14J504-A-1990 THINNER - EXEMPT ENAMEL
FORD WSS-M14J514-A-1997 SOLVENT, AROMATIC HYDROCARBON, THINNER
FORD ESK-M14J232-A-1994 THINNER, MIXTURE OF MIBK AND DIACETONEALCOHOL, DILUTION OF PAINTS
FORD WSK-M14J248-A-1990 SOLVENT, NITROCELLULOSE THINNER
FORD WSK-M14J247-A-1997 SOLVENT, NITROCELLULOSE THINNER
FORD ESK-M14J512-A1-2012 THINNER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD M14J506-A-1990 ENAMEL REDUCER - HIGH EFFICIENCY ACRYLIC
FORD SK-M14J9561-D-1995 THINNER, RECYCLING BASECOAT, SOLID COLOUR AND CLEARCOAT, DILUTION OF PAINT (Shown on SK-M14J9561-A)
FORD ESK-M14J512-A2-1988 THINNER Shown on ESK-M14J512-A1
FORD ESK-M14J250-A2-1990 THINNER (Shown on ESK-M14J250-A)
FORD SK-M14J9561-B-1995 THINNER (Shown on SK-M14J9561-A)
FORD SK-M14J9561-C-1995 THINNER (Shown on SK-M14J9561-A)

HU-MSZT

MSZ 7480-1961 Thinner
MSZ 09 80 015-1972 paint thinner
MSZ 8576-1959 fat thinner
MSZ 3268-1965 diluted bitumen
MSZ 1584/4-1981 dilute melting agent
MNOSZ 19958-1955 Sampling and inspection of diluted bitumen
MSZ 1584/7-1979 Diluted synthetic industrial melting agent
MSZ 1584/2-1981 Dilute industrial melting agent properties
MSZ MI-05 22.660/3-1972 MI-05 22.660/3-72 Manual paint thinning

TH-TISI

TIS 865-2001 Cut.back asphalt
TIS 1318-2009 Retarded thinner
TIS 496-2010 Lacquer thinner
TIS 496-1983(en) LACQUER THINNER
TIS 520-2010 Nitrocellulose lacquer thinner
TIS 520(1)-1984(en) AUTOMOTIVE NITROCELLULOSE LACQUER THINNER

SCC

AS 2157:1978 Cutback bitumen
AS 2157:1980 Cutback bitumen
CAN/CGSB-1.4-2000 Petroleum Spirits Thinner
CAN/CGSB-1.110-M91-1991 General Purpose Thinner For Lacquers
CAN/CGSB-1.70-1999 High-Solvency Thinner
HOLDEN HN 1057-2001 Kaylo Thinner No. 300
AENOR UNE 48162:1962 THINNERS FOR SYNTHETIC ENAMELS
CAN/CGSB-1.4-1992 Thinner, mineral spirits
CAN/CGSB-1.70-M91-1991 Thinner with high solvent power
HOLDEN HN 1573-2001 Diluent for Anti-Friction Coating
CAN/CGSB-16.1-M89-1989 Cutback bitumen for roads
CAN/CGSB-1.197-1992 Thinner for Epoxy Coatings
CAN/CGSB 1.4-2000 Diluant, essence minerale
CAN/CGSB-1.124-1993 Thinner for Vinyl Coatings
CAN/CGSB 1.70-1999 Thinner with high solvent power
CAN/CGSB 1.94-M89-1989 Thinner, xylene (xylol)
AENOR UNE 48085:1985 Water in solvents and diluents.
CAN/CGSB-1.5-M91-1991 Low Flash Petroleum Spirits Thinner
BS 5082:1974 Specification for water-thinned priming paints for wood
CAN/CGSB-1.94-M89-1989 Thinner, xylene (xylol)
NS 4749:1979 Biological oxygen demand, BOD — Dilution method
UNE-EN 14733:2006 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
CAN/CGSB-1.124-1999 Thinner for vinyl resin coatings
UNE-EN 14733:2006+A1:2011 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
NS-EN 14733:2005 Bitumen and bituminous binders — Bituminous emulsions, fluxed and cut-back bitumen factory production control
INT 29-1948 Thinner for Primer, Metal, Zinc Chromate
ASSP/AIHA Z9.10-2010 Fundamentals Governing the Design and Operation of Dilution Ventilation Systems in Industrial Occupancies
ASTM D597-46 Specification for Cut-Back Asphalt (Rapid Curing Type)
AWWA MTC64597 Treatment of Dilute Wastewater Using an Anaerobic Membrane Bioreactor
MIL MIL-T-81772B-1986 THINNER, AIRCRAFT COATING (SUPERSEDING MIL-T-81772A)
DIN 12839 E:2020 Draft Document - Dilution pipette, Demeter type 2.2
NS-EN 15626:2009 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method

CZ-CSN

CSN 67 3150 Cast.03-1975 Dilulion ability
CSN 67 5839-1980 Thinner S 6900 for p^ints
CSN 67 5811-1980 Thiímer H 6000 for paints
CSN 67 5832-1980 Thinner S 6017 for paints
CSN 65 7205-1977 Cut - back aaphalts for roads
CSN 67 5814-1980 Thinner C 6002 for palnts
CSN 67 5820-1980 Thinner S 6001 for paints
CSN 67 5834-1980 Thinner S 6023 for paints
CSN 67 5825-1980 Thinner S 6006 for paints
CSN 67 5824-1980 Thinner S 6005 for paints
CSN 67 5823-1980 Thinner S 6004 for pnints
CSN 67 5821-1980 Thinner S 6002 for pnints
CSN 67 5829-1980 Thinner S 6010 for paints
CSN 67 5822-1980 Thinner S 6003 for paints
CSN 65 1171-1986 Diluted phosphoric acid for industrial use
CSN 67 5833-1980 Thinner S 6019 for paints
CSN 67 5819-1980 Thinner L 6000 for paints
CSN 67 5817-1980 Thinner C 6013 for paints
CSN 67 5816-1980 Thinncr C 6004 for paints
CSN 67 5813-1980 Thinner C 6001 forpaints
CSN 67 5818-1980 Thinner C 6020 forpaints
CSN 67 5831-1980 Thinner S 6QI4 for pninls
CSN 67 5838-1980 Thinner S 6706 for paimts
CSN 67 5841-1980 Thinner U 6000 for paints
CSN 67 5836-1980 Thinner S 6301 for painls
CSN 67 5840-1980 Thínner S 6904 for paints
CSN 67 5810-1980 Thlnner B 6000 for aints
CSN 67 5837-1980 Thinner S 6302 for painLs
CSN 67 5835-1980 Thinner S 6300 forpainls
CSN 67 5830-1980 Thinner S 6013 forpaínls
CSN 67 5815-1980 Thinner C 6003 for paints
CSN 67 5828-1980 Thinner S 60O9 for paints
CSN 67 5842-1980 Thinner U 6002 f o palnts
CSN 67 5826-1980 Thinner S 6007 for painls
CSN 67 5812-1980 Thinner C 6000 for paints
CSN 67 5827-1980 Thinner S 60Ofi fnrpnints
CSN ON 67 5450-1964 Thinner for ehlorinated rubber paints
CSN 65 7079-1983 Test for volatility of cut-back asphalts
CSN ON 67 3650-1961 Thinner 6000 for oil paints
CSN 67 5251-1959 Thinner. L6001 for paint L 1002
CSN 65 7083-1981 Distillation of Cut - Back asphaltic /bítuminous/ products
CSN 67 4701-1960 Speciál thinner C 6001 for itrocellulose paints

European Committee for Standardization (CEN)

EN ISO 8655-4:2002 Piston-operated volumetric apparatus - Part 4: Dilutors
EN ISO 8655-4:2022 Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2022)

Association Francaise de Normalisation

NF B35-655-4*NF EN ISO 8655-4:2003 Piston-operated volumetric apparatus - Part 4 : dilutors
NF T31-111:1991 EXTENDERS. THERMALY TREATED SILICA FOR PAINT INDUSTRY. SPECIFICATIONS AND TEST METHODS.
NF X31-428-2*NF ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Part 2 : dissolution by alkaline fusion.
NF X41-580-5:2006 Wood preservatives - physicochemical testing - Part 5 : dilution testing.
NF S93-310:2004 Systems for distribution and treatment of water for dilution of concentrated solutions for hemodialysis - Design requirements, operation, performance and safety.
NF B35-206:1968 Laboratory glassware. Dilution pipettes.

Society of Automotive Engineers (SAE)

SAE AMS3170F-2005 THINNER Alcohol-Ester
SAE AMS3170E-1995 THINNER Alcohol-Ester
SAE AMS3170D-1978 THINNER Alcohol-Ester
SAE AMS3170C-1968 THINNER Alcohol - Ester
SAE AMS3170B-1953 THINNER Alcohol - Ester
SAE AMS3170A-1952 THINNER Alcohol - Ester
SAE AMS3170-1948 THINNER Alcohol - Ester
SAE AMS3180-1940 TOLUENE THINNER Commercial
SAE AMS3180B-1952 TOLUENE THINNER Commercial
SAE AMS3170F-1996 Thinner Alcohol-Ester
SAE AMS3180A-1947 TOLUENE THINNER Commercial
SAE AMS3180C-1963 TOLUENE THINNER Commercial
SAE AMS3430E-2014 Brazing Filler Metal, Paste, Copper, Water Thinning
SAE AMS3430D-2008 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430C-2006 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430C-2001 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430B-1994 BRAZING FILLER METAL, PASTE, COPPER Water Thinning

United States Navy

NAVY TT-T-2935-2000 THINNER, PURGING
NAVY TT-T-2935 VALID NOTICE 1-2005 THINNER, PURGING
NAVY AN6004 REV 4-1971 REGULATOR - DILUTER DEMAND OXYGEN
NAVY MIL-R-6018 C-1966 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C NOTICE 1-1996 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C (1)-1971 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY AN4077 REV 1-1944 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
NAVY AN4077 REV 1 NOTICE 1-1960 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE

SAE - SAE International

SAE AMS3170G-2008 Thinner@ Alcohol-Ester
SAE AMS3430B-1990 Brazing Filler Metal@ Paste@ Copper Water Thinning
SAE AMS3430-1958 PASTE@ COPPER BRAZING Water Thinning
SAE AMS3430A-1983 BRAZING FILLER METAL@ PASTE@ COPPER Water Thinning

Japanese Industrial Standards Committee (JISC)

JIS K 5538:2002 Lacquer thinner
JIS K 5538:1995 Lacquer thinner

CH-SNV

SEV 3064-1965 dilution. quality regulations
SN 210 902/1-1984 Aluminium and aluminium alloys, wrought productsBarsTechnical conditions for delivery

PL-PKN

PN BN 6016-11-1966 Thinner. Ammonium sulfate
PN BN 6118-13-1964 Aurit paint thinner
PN C96171-1970 Petroleum products Dilute road bitumen AUG for soil stabilization
PN BN 6118-20-1966 reactive pigment diluent
PN BN 6118-16-1965 121 BT/01 paint thinner
PN BN 6110-10-1964 Paint thinner. Sample selection
PN BN 6118-10-1963 Chlorinated rubber product thinner
PN BN 6118-21-1966 Epoxy asphalt product thinner
PN BN 6118-22-1966 Epoxy coating product thinner
PN BN 6118-04-1963 Paint MN-16 and TN-16 thinner
PN BN 6118-03-1963 Ethylene polymer product thinner
PN BN 6118-19-1966 Styrenic Paint Product Thinner
PN BN 6110-14-1965 Paint thinner. Ingredients and labeling
PN BN 6118-15-1965 Thermal Spray Nitrocellulose Paint Thinner
PN BN 6118-07-1963 Universal nitrocellulose product thinner
PN BN 6118-05-1963 Nitrocellulose Product Thinner No. 647
PN BN 6118-11-1963 Chemically hardened coating product thinners
PN BN 6118-09-1963 Asphalt paint and asphalt paint thinner
PN BN 6118-01-1963 Nitrocellulose Paint Thinner for Skin

IN-BIS

IS 217-1961 Specification for diluted bitumen
IS 454-1961 Specification for DIGBOI type diluted bitumen

GM Europe

GME L 000 0239-2013 Thinner A-I for clear coat (English/German)
GME B 040 0394-2011 Cleaning thinner for spray booths
GME L 000 0545-2004 Varnish Thinner A-II
GME B 040 0227-2010 Cleaning and rinsing thinner
GME B 040 1514-2010 Flushing and cleaning thinner
GME B 440 0225-2013 Thinner for top and clearcoats (English/German)
GME B 040 1501-2014 Thinner for Spot-Repair (English/German)
GME B 040 0980-2003 Dilute wetting agent (English/German)
GME L 000 0435-2003 Water Thinned Fuel Tank Paint (English/German)
GME L 000 0537-2008 Thinner for 2-component clear coat

IL-SII

S.I.T.D.663-1967 DILUTED DTES FOR FOODSTUFFS

American Society for Testing and Materials (ASTM)

ASTM D2026-97(2004) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97(2004) Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2026-97 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2399-83(2005) Standard Practice for Selection of Cutback Asphalts
ASTM D2399-83(1999) Standard Practice for Selection of Cutback Asphalts
ASTM D2026-97(2010) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2026/D2026M-97(2010)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D3271-87(2006) Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
ASTM D2027/D2027M-10 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2027/D2027M-13 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM E788-97(2013) Standard Specification for Pipet, Blood Diluting
ASTM E788-97(2008) Standard Specification for Pipet, Blood Diluting

RU-GOST R

GOST 20909.5-1975 Non-diluted sperm of bulls. Methods for tests of physical properties
GOST 20909.1-1975 Non-diluted sperm of bulls. Method of sampling

BR-ABNT

ABNT EB-96R-1956 alkyd enamel thinner
ABNT MB-230R-1956 Alkyd enamel diluent testing
ABNT EB-33-1945 Dilute lead chrome green. Brazilian specifications
ABNT EB-99-1968 Diluted asphalt concrete and residual oil

Canadian General Standards Board （CGSB)

CGSB 1.110-M91-CAN/CGSB CORR 1-1991 General Purpose Thinner for Lacquers
CGSB 1.70-99-CAN/CGSB-1999 Diluant A Pouvoir Solvant Eleve
CGSB 1.124-99-CAN/CGSB-1999 Thinner for Vinyl Coatings

GM North America

GM 9985231-1973 Copper Brazing Paste, Water Thinning
GM 9984478-1997 Purge Thinner - for Enamels
GM 9984036-1990 Purge Thinner - Reclaimed
GM 9984422-1990 Thinner - Mistcoat, for Waterborne Enamel
GM 9984454-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984466-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984431-1990 Reducing Solvents for Topcoats (Shown On 9984425)
GM 9984462-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984500-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984430-1990 Reducing Solvents for Topcoats (Shown On 9984425)
GM 9984495-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984424-1990 Thinner - Evaporation Loss for Solution Lacquer
GM 9984464-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984493-1989 Purge Thinner for 9984111 Replaced by 9984478
GM 9984497-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984494-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984436-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984499-1990 Reducing Solvents for Primers (Shown on 9984446)

Military Standards (MIL-STD)

DOD A-A-50812 A-1989 PIPET, BLOOD DILUTING
DOD A-A-54126-1990 PIPET-DILUENT, BLOOD, LABORATORY

AR-IRAM

IRAM 6608-1959 Fast hardening diluted asphalt
IRAM 6610-1959 Medium speed hardening diluted asphalt
IRAM 6612-1959 Low speed hardening diluted asphalt
IRAM 6595-1956 Distillation test method for diluted bitumen

German Institute for Standardization

DIN 12838:2021 Dilution pipette, Demeter type 1,1
DIN 12839:2021 Dilution pipette, Demeter type 2,2
DIN 12838:2021-08 Dilution pipette, Demeter type 1,1
DIN 12839:2021-08 Dilution pipette, Demeter type 2,2
DIN 12838:1964 Dilution pipette, Demeter type 1.1
DIN 12839:1964 Dilution pipette, Demeter type 2.2

GM Daewoo

GMKOREA EDS-M-8718-2007 ESTA CLEANING THINNER (VERSION: 4)

YU-JUS

JUS H.P8.514-1986 Testing of pesticide?. Dilution stability
JUS U.M3.030-1996 Cutback asphalts for roads - Quality reguirements

Defense Logistics Agency

DLA DD-B-601-1959 BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITERS

AENOR

UNE 48085:1985 WATER IN SOLVENTS AND THINNERS
UNE 48097:2001 Paints and varnishes. Dilution stability.
UNE 48057:1960 CORROSION TEST, OF SOLVENTS AND DILUENTS
UNE 7149:1959 MODIFIED MIXIBILITY TEST OF WATER CUTBACKS.

ES-AENOR

UNE 48-085-1985 Water in solvents and diluents
UNE 48 057 Corrosion testing of solvents and diluents

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1616-1981 Topcoat@ Water Reducible (Rev 1)
NAS1617-1981 Coating: High Temperature Resistant@ Water Reducible (Rev 1)

U.S. Military Regulations and Norms

ARMY MIL-P-53030 A (2)-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
ARMY MIL-P-53030 A-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
ARMY A-A-857 B VALID NOTICE 2-2009 Thinner, Dope and Lacquer (Cellulose Nitrate)