content/peak area ratio

content/peak area ratio, Total:194 items.

The international standard classification for "content/peak area ratio" includes: Fissile materials , Mineral and metal fibres , Radiation measurements , Other methods of testing of metals , Cement. Gypsum. Lime. Mortar , Auxiliary materials and additives for plastics , Iron ores , Chemical analysis of metals , Powder metallurgy , Solid fuels , Particle size analysis. sieving , Cylinders , Textiles in general , Textile fabrics , Rubber compounding ingredients , Other products of the chemical industry , Physicochemical methods of analysis .

The Chinese standard classification for "content/peak area ratio" includes: Nuclear material, nuclear fuel and their analytical test method , Basic standards and general method , Building material raw material ore , Metallographic testing method , Cement , Carbon black , Metal physical property test method , Iron ore , Powder metallurgy analysis method , Coal for coking, chemical and building materials , Hydraulic and pneumatic device , Length Measurement , Basic standards and general methods , Basic standards and general methods for catalyst , Basic standards and general methods for synthetic resin and plastic , Special ceramics .

Group Standards of the People's Republic of China

T/ZSA 110-2022 Specific surface area and pore size analyzer
T/QGCML 2979-2024 Highly dispersed and large specific surface area zinc oxide
T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method

Professional Standard - Hydroelectric Power

SD 174-1985 Slope-area method determination specification

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 207-1963 Method of determination for specific surface of cement
GB/T 16698-1996 Measurement of emission rate of α particle Method for large area proportional counter
GB/T 6646.4 COR-1986 Method for specific surface area of chrysotile asbestos COR
GB/T 16698-2008 Measurement of emission rate of α particle - Method for large area proportional counter
GB/T 11847-2008 Determination of specific surface area of uranium dioxide powder by BET capacity method
GB/T 13390-1992 Metallic powder－Determination of the specific surface area－Method of nitrogen adsorption
GB/T 11847-1989 Determination of specific surface area of uranium dioxide powder by multipoint BET method
GB/T 10322.9-2023 Iron ores—Determination of specific surface area—Test method using air-permeability apparatus (Blaine)
GB/T 8074-2008 Testing method for specific surface of cement—Blaine method
GB/T 8074-1987 Testing method for specific surface of cement; Blaine method
GB/T 3780.5-2008 Carbon black - Part 5：Determination of specific surface area-CTAB test method
GB/T 13390-2008 Metallic powder-Determination of the specific surface area - Method of nitrogen adsorption
GB/T 10322.8-2009 Iron ores—Single-point determination of specific surface area—Nitrogen adsorption method
GB/T 22587-2008 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
GB/T 22587-2017 Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
GB/T 7702.20-2008 Test method for granular activated carbon from coal - Determination of pore volume and specific surface area
GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 13305-2008 Micrographic method for determining area content of the α-phases in stainless steels
GB/T 8074-2008(英文版) Testing method for specific surface of cement—Blaine method
GB/T 3780.5-2002 Carbon black used in rubber products--Determiantion of specific surface area--CTAB test method
GB/T 13305-1991 Austenitic stainless steels－Determination of area content of the α-phase－Micrographic method using STANDARD diagrams
GB/T 6646.4-1986 Method for specific surface area of chrysotile asbestos
GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method

Professional Standard - Chemical Industry

HG/T 6138-2023 Specific surface area and pore size analyzer

Taiwan Provincial Standard of the People's Republic of China

CNS 11151-1984 Method of Test for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete

Professional Standard - Machinery

JB/T 7939-1999 Hydraulic fluid power. Cylinders. Bore and rod area ratios
JB/T 7939-2010 Hydraulic fluid power-Bore and rod area ratios

National Metrological Verification Regulations of the People's Republic of China

JJG(建材) 107-1999 Verification regulation for determination specific surface area of air permeability apparatus
JJG 660-2006 Verification Regulation of Pattern Area Measuring Instruments

Professional Standard - Textile

FZ/T 01033-1993 Determination of Mass Per Unit Area and Pile Fabrics (Cover) Containing Cashmere
FZ/T 01033-2012 Test Method of Mass Per Unit Area and Pile Percent of Pile Fabric

Professional Standard - Energy

NB/SH/T 0571-2021 Standard test method for determining microspore volume and zeolite area of a catalyst

国家能源局

SY/T 6154-2019 Determination of specific surface and pore size distribution of rocks- Static adsorption capacity method
SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts Static nitrogen adsorption capacity method

Professional Standard - Military and Civilian Products

WJ 2250-1994 Verification Regulations for Activated Carbon Specific Surface Area Meter

Professional Standard - Agriculture

126药典四部-2020 0900 Property inspection method 0991 Specific surface area measurement method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 3780.5-2017 Carbon black-Part 5:Determination of specific surface area-CTAB test method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38691-2020 Testing method for specific surface area of petroleum refining catalysts
GB/T 40139-2021 Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging

National Metrological Technical Specifications of the People's Republic of China

JJF 1479-2014 Calibration Specification for Dose Area Product Meters

Professional Standard - Building Materials

JC/T 995-2006 Zirconia powder with low specific surface area and better sinter ability

工业和信息化部

QB/T 5089-2017 Leather. Measurement of area

Korean Agency for Technology and Standards (KATS)

KS B ISO 1070:2003 Liquid flow measurement in open channels－Slope-area method
KS I ISO 11461:2005 Soil quality－Determination of soil water content calculatedon a volume basis(Gravimetric method)
KS M 1915-2009 Phthalic anhydride for industrial use－Methods of test－Determination of 1,4-naphthaquinone content－Colorimetric method
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS B ISO 7181-2013 Hydraulic fluid power－Cylinders－Bore and rod area ratios
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS B 5323-2009 Variable area flowmeters
KS B ISO 7181-2006(2011) Hydraulic fluid power－Cylinders－Bore and rod area ratios
KS M ISO 11646-2017(2022) Leather－Measurement of area
KS M ISO 11646-2022 Leather－Measurement of area
KS B 5323-2009(2019) Variable area flowmeters
KS B 5323-2019 Variable area flowmeters
KS B 5323-1995 Variable area flowmeters
KS A 0094-2019 Determination of the specific surface area of powders(solids) by gas adsorption method
KS B ISO 7181:2006 Hydraulic fluid power-Cylinders-Bore and rod area ratios
KS B ISO 7181:2013 Hydraulic fluid power－Cylinders－Bore and rod area ratios
KS B OIMLR 139-1-2006 Instruments for measuring the areas of leathers
KS M ISO 11646:2007 Leather－Measurement of area
KS M ISO 11646:2017 Leather－Measurement of area
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method

International Organization for Standardization (ISO)

ISO 1070:1992 Liquid flow measurement in open channels; slope-area method
ISO 11461:2001 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
ISO 23604:2022 Method of determining specific surface area of coal
ISO 12800:2003 Nuclear fuel technology - Guide to the measurement of the specific surface area of uranium oxide powders by the BET method
ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
ISO 12800:2017 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
ISO 11646:2014 Leather - Measurement of area
ISO 11646:2014 | IULTCS/IUP 32 Leather — Measurement of area
ISO 11646:1993 | IULTCS/IUP 32 Leather — Measurement of area
ISO 7181:1991 Hydraulic fluid power; cylinders; bore and rod area ratios
ISO 9277:2022 Determination of the specific surface area of solids by gas adsorption — BET method
ISO 11646:1993 Leather; measurement of area
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio

YU-JUS

JUS H.B8.239-1988 Ethanot for industrial use. Determination of methanol content (methanol contents between 0,10 and 1J50% (V/V)). Visualcolorimetricmethod
JUS H.G8.210-1985 Reagents. Methanct. Determination of free acidcontent (as HCOOH). Volumetric method
JUS L.N1.046-1991 Ey?raulic fluid pofter. CylJoders. Bore and rod area ratios

ZA-SANS

SANS 5748:2010 Specific surface of cement
SANS 5748:2006 Specific surface of cement

Association Francaise de Normalisation

NF EN 16074:2019 Paints and varnishes - Determination of the non-volatile matter content and the specific surface yield of pre-painting coatings
NF EN ISO 18757:2006 Technical ceramics - Determination of the specific surface area (mass area) of ceramic powders by gas adsorption using the BET method
NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
NF M60-456*NF EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
NF G52-021*NF EN ISO 11646:2014 Leather - Measurement of area
NF G52-021:2000 Leather - Measurement of area.
NF C74-103*NF EN IEC 60580:2020 Medical electrical equipment - Dose area product meters

CZ-CSN

CSN 72 2114-1970 Determination of specific surface of cement
CSN 44 1818-1987 Iron ore concentrates, Method of determination of specific surface

SCC

AENOR UNE 51001:1966 DETERMINATION OF SPECIFIC WEIGHT WITH AREOMETER
NS 9011:1981 Liquid chlorine for industrial use — Determination of the content of chlorine by volume in the vaporized product
DANSK DS/ISO 12800:2018 Nuclear fuel technology – Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
NS 848:1954 Area and volumes of buildings — Rules for measurement
AS 2879.4:1991 Alumina - Determination of specific surface area by nitrogen adsorption
UNE 59050:1993 LEATHER. MEASUREMENT OF AREA.
DANSK DS/EN ISO 11646:2014 Leather - Measurement of area
BS 4359-2:1971 Determination of the specific surface area of powders. Recommended air permeability methods
BS ISO 7181:1991 Hydraulic fluid power. Cylinders. Bore and rod area ratios
AWPA F1-95 Volume and Specific Gravity Correction Tables for Creosote and Creosote Solution (Up to 59% Tar)
CEI EN IEC 60580:2020 Medical electrical equipment - Dose area product meters
DANSK DS/EN IEC 60580:2020 Medical electrical equipment – Dose area product meters
AWWA ACE63152 Comparison of Lead Contributions from Faucets of Varying Lead Content
DANSK DS/EN 60580:2001 Medical electrical equipment – Dose area product meters
AS 3778.3.3:1990 Measurement of water flow in open channels, Part 3.3: Velocity-area methods - Measurement by slope-area method
AWPA F1-08 Volume and Specific Gravity Correction Tables for Creosote and Creosote Solution (Up to 59% Tar)
DANSK DS/EN ISO 12800:2019 Nuclear fuel technology – Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)
CEI EN 60580:2001 Medical electrical equipment - Dose area product meters

GSO

BH GSO ISO 19950:2022 Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas
GSO ISO 19950:2021 Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas
OS GSO 543:1994 Carpets - determination of measured surface pile density and measured pile fiber volume ratio.
GSO ISO 1388-7:2002 Ethanol for industrial use metod of test : determination of methanol content between 0.01 and 0.20 % (v/v ) - photometric method .
GSO ISO 16586:2013 Soil quality -- Determination of soil water content as a volume fraction on the basis of known dry bulk density -- Gravimetric method
NB/SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts - Static nitrogen adsorption capacity method
GSO ISO 12800:2013 Nuclear fuel technology -- Guide to the measurement of the specific surface area of uranium oxide powders by the BET method
BH GSO ISO 11646:2016 Leather -- Measurement of area
OS GSO ISO 9277:2013 Determination of the specific surface area of solids by gas adsorption -- BET method
BH GSO ISO 9277:2016 Determination of the specific surface area of solids by gas adsorption -- BET method
OS GSO IEC 60580:2014 Medical electrical equipment - Dose area product meters
BH GSO IEC 60580:2016 Medical electrical equipment - Dose area product meters
GSO ISO 10111:2013 Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods

British Standards Institution (BSI)

BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
BS ISO 23604:2022 Method of determining specific surface area of coal
21/30425566 DC BS ISO 23604. Method of determining specific surface area of coal
BS EN ISO 12800:2019 Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
BS EN ISO 11646:1998 Leather - Measurement of area
BS EN ISO 11646:2014 Leather. Measurement of area
BS ISO 7181:1997 Hydraulic fluid power. Cylinders. Bore and rod area ratios
BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
BS EN IEC 60580:2020 Medical electrical equipment. Dose area product meters
BS EN 61788-12:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-12:2002 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-12:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires

RU-GOST R

GOST 10898.5-1984 Ion-exchange resins. Determination of specific surface
GOST 13144-1979 Graphite. Methods for the determination of specific surface
GOST R ISO 11646-2017 Leather. Measurement of area

European Committee for Standardization (CEN)

EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
HD 379 S1-1979 Area exposure product meter
EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)

RO-ASRO

STAS 4223/2-1970 CEMENT Determination of specific surface by means of the flowmeter

TR-TSE

TS 3496-1980 DETERMINATION OF SPECIFIC SURFACE AREA OF POWDERED ORE SAMPLES

PT-IPQ

E 209-1967 water. Determine the percentage of water in the total sulfide content (measurement volume)

IN-BIS

IS 11146-1984 Recommendations for Hydraulic Cylinder Bore Diameter and Rod Area Ratio
IS 5534-1969 Method for determination of specific surface area of powdered ore samples

American Society for Testing and Materials (ASTM)

ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D5130-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials

Japanese Industrial Standards Committee (JISC)

JIS Z 8830:1990 Determination of the specific surface area of powders by gas adsorption methods

AENOR

UNE 22164:1994 DETERMINATION OF BET SPECIFIC SURFACE FOR SEPIOLITIC MATERIALS.
UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.

PL-PKN

PN C04422-1968 Inorganic pigment* for paints Determination ol specific area
PN C89652-1987 Porous materials and powders The BET method for the determination of the specific surface area

HU-MSZT

MSZ 10861/1-1980 Deposition machinery. Nickel content
MSZ 10861/4-1981 Deposition equipment. Silver content
MSZ 6186-1979 Official corn proportion content

German Institute for Standardization

DIN EN ISO 12800:2019-09 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German version EN ISO 12800:2019
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN EN ISO 11646:2014-07 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
DIN ISO 9277:2014-01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN EN IEC 60580:2021-07 Medical electrical equipment - Dose area product meters (IEC 60580:2019); German version EN IEC 60580:2020
DIN 15545:1972-03 Film 35 mm; projected image area, aspect ratio 1,66 : 1
DIN EN ISO 11646:2014 Leather - Measurement of area (ISO 11646:2014); German version EN ISO 11646:2014
DIN EN ISO 11646:1998 Leather - Measurement of area (ISO 11646:1993); German version EN ISO 11646:1998
DIN EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)
DIN EN ISO 12800:2018 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German and English version prEN ISO 12800:2018

Danish Standards Foundation

DS/EN ISO 11646:1999 Leather - Measurement of area

ATIS - Alliance for Telecommunications Industry Solutions

T1.TR.74-2001 Objective Video Quality Measurement Using a Peak- Signal-to-Noise-Ratio (PSNR) Full Reference Technique

AT-ON

ONORM ISO 7181:1992 Hydraulic fluid power - Cylinders -Area ratios between bores and rods

KR-KS

KS A ISO 9277-2024 Determination of the specific surface area of solids by gas adsorption — BET method

SE-SIS

SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio

IT-UNI

UNI 4870-1961 Wood particle panel testing. Unit area weight determination and apparent specific gravity determination

ES-UNE

UNE-EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017) (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN IEC 60580:2020 Medical electrical equipment - Dose area product meters (Endorsed by Asociación Española de Normalización in May of 2020.)

SAE - SAE International

SAE AMS2401E-2000 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401D-1986 Cadmium Plating Low Hydrogen Content Deposit

Society of Automotive Engineers (SAE)

SAE AMS2401J-2013 Plating, Cadmium, Low Hydrogen Content Deposit
SAE J911-1998 Surface Roughness and Peak Count Measurement of Cold-Rolled Sheet Steel
SAE AMS2401A-1965 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401-1963 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401G-2002 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2401D-1991 CADMIUM PLATING Low Hydrogen Content Deposit
SAE AMS2401B-1968 CADMIUM PLATING Low Hydrogen Content Deposit

Indonesia Standards

SNI 13-6661-2002 Specific surface area measurement for mineral powder by nitrogen gas adsorption

Standard Association of Australia （SAA）

AS/NZS 4957:2002 Medical electrical equipment - Dose area product meters