Eclipse

Eclipse, Total:73 items.

The international standard classification for "Eclipse" includes: Lubricants, industrial oils and related products , Other methods of testing of metals , Testing of metals , Corrosion of metals , Semiconducting materials , Cement. Gypsum. Lime. Mortar , Surface treatment .

The Chinese standard classification for "Eclipse" includes: Lubricating grease , Metallographic testing method , Metal physical property test method , Metal chemical property test method , Compound semiconductor material , Cement , Vacuum grease and anti-rust grease , Synthetic grease , Petroleum drilling .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 226-1991 Etch test for macrostructure and defect of steels
GB/T 30868-2014 Test method for measuring micropipe density of monocrystalline silicon carbide wafers―Chemically etching
GB/T 18590-2001 Corrosion of metals and alloys - Evaluation of pitting corrosion
GB/T 17897-1999 Test of pitting corrosion resistance of stainless steels in the ferric chloride solution
GB/T 43315-2023 Test method for flow pattern defects in silicon wafer—Etching technique
GB/T 7326-1987 Lubricating grease; Corrosiveness to copper; Copper strip test
GB/T 226-2015 Test method for macrostructure and defect of steel by etching
GB/T 6383-2024 Method of cavitation corrosion test
GB/T 749-2008 Test Method for Determining Capability of Resisting Sulfate Corrod

Professional Standard - Petrochemical Industry

SH/T 0106-1992 Test method for sweat corrosion of anti-rust oil
SH/T 0232-1992 Determination method for copper strip corrosion of liquefied petroleum gas
SH/T 0080-1991 Test method for corrosivity of rust preventive oil and grease
SH/T 0450-1992 Determination method for oxidation corrosion of synthetic oil
SH/T 0195-1992 Lubricating Oil Corrosion Test Method
SH/T 0331-1992 Test method for corrosion of lubricating grease

Professional Standard - Agriculture

卫法监发〔2001〕159号 Notice on Printing and Distributing Test Methods for Determination of Benzoyl Peroxide in Flour and Oil
卫法监发〔2003〕42号 Notice on Printing and Distributing "Technical Specifications for Inspection and Evaluation of Health Foods" (2003 Edition)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 14142-2017 Test method for crystallographic perfection of epitaxial layers in silicon—Etching technique
GB/T 8753.1-2017 Anodizing of aluminium and its alloys-Assessment of quality of sealed anodic oxidation coatings-Part 1:Measurement of the loss of mass after immersion in acid solution(s)

Professional Standard - Electricity

DL/T 1460-2015 Test Method for Quantitative Determination of Corrosive Sulfur in Mineral Insulating Oils Copper Power Corrording Test

Professional Standard - Military and Civilian Products

WJ/Z 258-1990 Propellant ablative test ablation gun method

Group Standards of the People's Republic of China

T/WSJD 53-2024 Radon Measurement CR-39 Track Etch Method

Professional Standard - Petroleum

SY 5390-1991 Drilling Fluid Corrosion Performance Test Method Drill Pipe Corrosion Ring Method
SY/T 5390-1991 Inspection Method for Corrosion Properties of Drilling Fluid - Drill Bar Corrosion Ring Method

Taiwan Provincial Standard of the People's Republic of China

CNS 10008-1983 Processes of Corrosion Protection for Magnesium Alloys
CNS 13624-1995 Test Methods for Crystallographic Perfection of Gallium Arsenside by Molten Potassium Hydroxide(KOH)Etch Technique

Military Standard of the People's Republic of China-General Armament Department

GJB 323B-2018 Ablative material ablation test method
GJB 323A-1996 Ablative material ablation test method

RO-ASRO

STAS 12640-1988 MACIIINING BY ELECTROEROSION Terminology

JP-JAS

IPC - Association Connecting Electronics Industries

IPC TM-650 2.3.7.2A-1994 Alkaline Etching Method
IPC TM-650 2.3.7.1A-1994 Cupric Chloride Etching Method
IPC TM-650 2.3.32D-2004 Flux Induced Corrosion (Copper Mirror Method)
IPC TM-650 2.3.32C-1995 Flux Induced Corrosion (Copper Mirror Method)

Korean Agency for Technology and Standards (KATS)

KS D 0225-2021 Method of 10 percent oxalic acid etch, test for stainless steels
KS B 0510-2001 METHOD OF WET CORROSION TEST FOR BRAZED JOINT
KS D 8329-1986 Processes for corrosion protection of magnesium alloys
KS M 2196-2011(2021) Testing method for rust generation
KS K 0833-2009 Test method for snap corrosion
KS D 8329-2020 Processes for corrosion protection of magnesium alloys
KS D 0292-2009 Test method of erosion corrosion on pipe

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS)

MSS SP-51-2007 Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings
MSS SP-51-2021 Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings
MSS SP-51-2003 Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings
MSS SP-51-2012 Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings

CZ-CSN

CSN 42 0467-1983 Macrostructure of steel. Deep etching method control. Reference samples

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.

SP-51-2000 Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings
SP-51-2012 Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings
SP-51-2007 Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings
SP-51-2003 Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings

International Federation of Trucks and Engines

NAVISTAR CEMS AT-2-2001 Determination of Austenite Grain Size by Thermal Etching
NAVISTAR MPAPS AT-2-2016 Determination of Austenite Grain Size by Thermal Etching

Association Francaise de Normalisation

NF A05-153:1984 Iron and steel. Macroscopic examination by means of copper salt etching.
NF X31-147:1996 Soil quality. Soils, sediments. Total solubilizing by acid attack.
NF U44-140:1984 Fertilizers and soils conditioners. Solubilizing of calcium and magnesium by hydrochloric attack.

American Society for Testing and Materials (ASTM)

ASTM D3885-07 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D968-05e1 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM D968-05(2010) Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM D968-05 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM D968-93(2001) Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM D968-15 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

Japanese Industrial Standards Committee (JISC)

JIS G 0553 AMD 1:2012 Steel -- Macroscopic examination by etching (Amendment 1)
JIS G 0553:2008 Steel -- Macroscopic examination by etching

HU-MSZT

MSZ KGST 990-1978 Erosion Methods for Electrodeposition Measurements

International Organization for Standardization (ISO)

ISO 4969:2015 Steel - Etching method for macroscopic examination

British Standards Institution (BSI)

14/30286808 DC BS ISO 4969. Steel. Etching method for macroscopic examination
BS ISO 15106-7:2015 Plastics. Film and sheeting. Determination of water vapour transmission rate. Calcium corrosion method

GSO

DL/T 429.8-1991 Test method for oil quality in power system--Corrosion determination method

American National Standards Institute （ANSI)

ANSI/ADA 97-2002 Corrosion Test Methods

SCC

ADA 97-2002(R2013) Corrosion Test Methods

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM1312-9-1997 Fastener Test Methods; Method 9 Stress Corrosion