Craton structure

Craton structure, Total:281 items.

The international standard classification for "Craton structure" includes: Steels profiles , Stainless steels , Reinforced plastics , Structures of buildings , Steel bars and rods , Rolling, extruding and drawing equipment .

The Chinese standard classification for "Craton structure" includes: Steel ingot and billet , Steel and iron products in general , Fibre reinforced composites , Profile steel and deformed steel , Mould .

Professional Standard - Aviation

HB 8610-2021 General requirements for loading of tension and compression pads for aircraft structural testing

Professional Standard - Ferrous Metallurgy

YB/T 037-1993 High-quality structural steel cold-drawn flat steel
YB/T 037-2005 Quality structure cold-draw flat steels

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1452-1987 Test method for flatwise tension strength of nonmetal sandwich constructions
GB/T 1452-2005 Test method for flatwise tensioin strength of sandwich constructions
GB 55004-2021 General code for composite structures
GB 55005-2021 General code for timber structures
GB/T 3078-2008 Quality structural steel cold drawn bars
GB/T 31539-2015 Pultruded fiber reinforced polymer composites structural profiles
GB/T 3078-1994 Technical Requirements for Quality Structural Steels Cold Drawn Bar
GB 55001-2021 General code for engineering structures
GB 55007-2021 General code for masonry structures

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 3078-2019 Quality structural steel cold drawn bars
GB/T 6110-2021 Drawing dies—Carbide alloy drawing dies—Structural types and dimensions

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 1452-2018 Test method for flatwise tension strength of sandwich constructions
GB/T 35156-2017 Fiber reinforced polymer composites structural cables

Anhui Provincial Standard of the People's Republic of China

DB34/T 2235-2014 Technical specification for testing the tensile strength of structural concrete by drilling and pulling method

Group Standards of the People's Republic of China

T/HBFWZL 04-2022 pramipexole transdermal patch
T/CECS 692-2020 Technical specification for structure of pultruded fiber reinforced polymer composites

Professional Standard - Urban Construction

GB 55006-2021 General code for steel structures

Professional Standard - Agriculture

711药典二部-2020 Potassium clavulanate, part seven
672药典二部-2015 The first part Qihua clarithromycin tablets
671药典二部-2015 The first part seven draw clarithromycin
548药典二部-2010 Potassium clavulanate, part seven
555药典二部-2010 The first part Qihua clarithromycin tablets
665药典二部-2015 Potassium clavulanate, part seven
554药典二部-2010 The first part seven draw clarithromycin
717药典二部-2020 The first part seven draw clarithromycin
718药典二部-2020 The first part Qihua clarithromycin tablets

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 2569-1997 Melon Variety Karaxai (Jiashi Melon)

Military Standard of the People's Republic of China-General Armament Department

GJB 2876-1997 General specifications for aircraft structures

未注明发布机构

DIN 53292:1976 Testing of sandwiches; Tensile test perpendicular to the faces
DIN EN ISO 8339 E:2001-11 Determination of tensile properties of sealants for building structures (draft)
DIN EN 572-6:1995 Basic products made from soda lime glass
ASTM RR-C24-1028 1990 C1135-Test for Determining of Tensile Adhesion Properties of Structural Sealants

Hebei Provincial Standard of the People's Republic of China

DB13/T 1682-2012 Zn-5%Al-Mixed Rare Earth Alloy Coated Cable for Structural Use

American Society of Civil Engineers (ASCE)

ASCE 55-16-2016 Tensile Membrane Structures

SCC

AWWA ACE61715 Commercial, Institutional, and Industrial Water Use in the Santa Clara Valley Water District
BS PD CEN/TS 19102:2023 Design of tensioned membrane structures
MIL MIL-DTL-43098/27A-2017 MEDALLION, CLARA BARTON OUTSTANDING TEAM AWARD, DEFENSE POW/MIA ACCOUNTING AGENCY
MIL MIL-DTL-43098/27-2017 MEDALLION, CLARA BARTON OUTSTANDING TEAM AWARD, DEFENSE POW/MIA ACCOUNTING AGENCY
AS 2249:1979 Sandarac resin
AWWA SOURCES55727 Water Reuse Planning in Clark County Sanitation District
MIL MIL-DTL-11589/594-2005 RIBBON, IRAQ CAMPAIGN MEDAL
MIL MIL-DTL-3943/319C-2016 Medal, Iraq Campaign
MIL MIL-DTL-3943/319B-2008 Medal, Iraq Campaign
MIL MIL-DTL-11589/594B-2015 Ribbon, Iraq Campaign Medal
MIL MIL-DTL-11589/594A-2010 Ribbon, Iraq Campaign Medal
DIN EN 3346 E:1998 Draft Document - Aerospace series - Aluminium alloy AL-P2014A-T3 - Drawn tube for structural applications; 0.6 mm <kleiner => a <kleiner => 12.5 mm
MIL MIL-DTL-11589/696-2017 RIBBON, CLARA BARTON, OUTSTANDING TEAM AWARD, DEFENSE POW/MIA ACCOUNTING AGENCY
BS 1243:1964 Specification for metal ties for cavity wall construction
AENOR UNE-EN 1993-1-11:2015 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
NS-EN 1993-1-11:2006 Eurocode 3 — Design of steel structures — Part 1-11: Design of structures with tension components
DANSK DS/EN 1993-1-11:2007 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
BS 1243:1972 Specification for metal ties for cavity wall construction
DANSK DS/EN 1993-1-11/AC:2007 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
AS A157:1966 Low and intermediate tensile strength carbon steel plates of structuralquality
CAN/CGSB-38.43-1993 Construction Details for Uniform Coats, Jackets and Tunics (Fusible Interlining)
AWWA ACE58332 Distributed Generation at the Santa Clara Valley Water District
DIN EN 1383 E:2014 Draft Document - Timber structures - Test methods - Pull through resistance; German version prEN 1383:2014
AWWA ACE95006 Water Availability for Future Municipal Use in the Portland, Oregon Area, From the Bull Run, Columbia, Clackamas, Willamette and Trask Rivers
UNE-EN 1383:2000 TIMBER STRUCTURES. TEST METHODS. PULL THROUGH RESISTANCE OF TIMBER FASTENERS.
DIN 96142 E:2011 Draft Document - Medical instruments - Ligature needle type Kronecker
MIL MIL-DTL-11484/313D-2019 Lapel Button, IRAQ Campaign Medal
MIL MIL-DTL-11484/313C-2015 Lapel Button, IRAQ Campaign Medal
AWWA WQTC62616 Utilization of Groundwater Resources in Iraq Rural Potable Water Supply Fast Track Reconstruction
AWWA WQTC64057 Brackish Water Treatment for Rural Water Supplies in Iraq
AWWA SOURCES55691 Challenges to Meet High Reclaimed Water Quality in Clark County, Nevada
DIN EN 1993-1-11 E:2024 Draft Document - Eurocode 3 - Design of steel structures - Part 1-11: Tension components; German and English version prEN 1993-1-11:2024
MIL MIL-DTL-11484/313B-2010 Lapel Button, IRAQ Campaign Medal
MIL MIL-DTL-11484/313A-2005 LAPEL BUTTON, IRAQ CAMPAIGN MEDAL
NS-EN 1383:2016 Timber structures — Test methods — Pull through resistance of timber fasteners
MIL MIL-DTL-11484/313-2005 LAPEL BUTTON, IRAQ CAMPAIGN MEDAL
AWWA SOURCES55665 Proactive Public Participation by Clark County Sanitation District in Reuse Planning
NS-EN 1383:1999 Timber structures — Test methods — Pull through resistance of timber fasteners
DANSK DS/EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners
AENOR UNE-EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners
NS-EN 1382:2016 Timber Structures — Test methods — Withdrawal capacity of timber fasteners
DANSK DS/EN 1382:2016 Timber Structures - Test methods - Withdrawal capacity of timber fasteners
UNE-EN 1382:2000 TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF TIMBER FASTENERS

Standard Association of Australia （SAA）

AS 3550.7:1993 Waters - The construction and use of the Secchi disc
AS 2249:1999(R2013) Australian sandalak resin
AS 1636.1:1996 Tractors - Roll-over protective structures - Criteria and tests - Conventional tractors

American National Standards Institute （ANSI)

ANSI/ASAE S478.1-2012 Roll-Over Protective Structures (ROPS) for Compact Utility Tractors

GM Europe

GME L 000 0218-2010 Kunstaz-De Klerk

British Standards Institution (BSI)

PD CEN/TS 19102:2023 Design of tensioned membrane structures
PD CEN TS 19102:2023 Design of tensioned membrane structures
BS EN 1993-1-11:2006 Eurocode 3. Design of steel structures - Design of structures with tension components
BS EN 1383:1999 Timber structures - Test methods - Pull-through resistance of timber fasteners
BS EN 1993-1-11:2006(2010) Eurocode 3 — Design of steel structures — Part 1 - 11 : Design of structures with tension components
BS EN 1993-1-11:2006/NA:2008 Eurocode 3 : Design of steel structures Part 1 - 11 : Design of structures with tension components
BS ISO 630-2:2021 Structural steels. Technical delivery conditions for structural steels for general purposes
BS ISO 12003-1:2008 Agricultural and forestry tractors - Roll-over protective structures on narrow-track wheeled tractors - Front-mounted ROPS
BS ISO 12003-1:2009 Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors. Front-mounted ROPS
NA to BS EN 1993-1-11:2006 UK National Annex to Eurocode 3. Design of steel structures. Design of structures with tension components
NA to BS EN 1993-1-11-2006 National Annex (informative) to BS EN 1993‑1‑11:2006, Eurocode 3: Design of steel structures – Part 1‑11: Design of structures with tension components
BS EN 12504-3:2005 Testing concrete in structures - Determination of pull-out force
BS ISO 6971:2002 Cranked-link drag chains of welded construction, attachments and sprockets
NA to BS EN 1993-1-11-2008 UK National Annex to Eurocode 3. Design of steel structures. Design of structures with tension components

European Committee for Standardization (CEN)

CEN/TS 19102:2023 Design of tensioned membrane structures
FprCEN/TS 19102 Design of tensioned membrane structures
prEN 1993-1-11 rev Eurocode 3 - Design of steel structures - Part 1-11: Tension components

CZ-CSN

CSN 73 1401 Zb-1988 Czech National Standard 73 1401 Steel Structure Design
CSN 73 8106 Za-1986 Czech Standard 73 8106 Protective and recording structures
CSN 73 1101 Zb-1987 Czech National Standard 73 1101 Masonry design structures
CSN 73 1201 Za-1989 Czech national standard 731201 Design of concrete structures
CSN 73 6205 Zc-1989 Czech National Standard 73 6205 Steel Bridge Structural Design
CSN 73 6205 Za-1987 Czech National Standard 73 6205 Steel Bridge Structural Design
CSN 73 1101 Za-1982 Czech National Standard 73 1101 Masonry design structures
CSN 73 1201 Zd-1986 Czech National Standard 73 1201 Design of concrete structures
CSN 73 0851 Za-1990 Czech National Standard 73 0851 * Determination of fire-resistant building structures
CSN 73 1251 Za-1982 Czech National Standard 73 1251 Design of concrete structures
CSN 73 1204 Za-1990 Czech National Standard 73 1204 Specific structural design in two directions
CSN 73 0101 Zc-1970 Revision c. 6/1970 Czech National Standard 73 0101 Building Structural Drawings
CSN 03 8260 Za-1989 Czech National Standard 03 8260 Protection of Steel Structures from Atmospheric Corrosion

Korean Agency for Technology and Standards (KATS)

KS H 2524-2023 Garaetteok
KS M 7096-2002 Testing method for stiffness of paper(clark method)
KS M 7096-1993 Testing method for stiffness of paper(clark method)
KS D 3777-2018 High tensile strength steel tubes for tower structural purposes
KS D 3781-2016(2021) High tensile strength steel for tower structural purposes
KS D 3780-2006(2011) High tensile strength steel tubes for tower structural purposes
KS M 7096-2018 Paper — Determination of stiffness by Clark stiffness tester
KS W 0635-1992(2012) Aircraft-Ground support electrical supplies - General requirements
KS F 2157-1-2017 Method of tension test for nonstructural wood-based panels
KS F 2157-2-2017 Method of tension test for structural wood-based panels
KS F 2762-2021 Measurement of bond strength of products for the protection and repair of concrete structures by pull-off
KS M 7096-2008 Paper-Determination of stiffness by Clark stiffness tester
KS M 7096-2013 Paper ? Determination of stiffness by Clark stiffness tester
KS F 2157-8-2015 Method of tension test for structural wood--based panels
KS F 2157-4-2015 Method of tension test for structural wood--based panels
KS F 2157-2-2007 Method of tension test for structural wood-based panels
KS B 0864-1971(1995) METHOD OF NOTCHED TENSION TESTING OF MATERIAL FOR WELDED STRUCTURE
KS F 2158-2-2007 Method of compression test for wood-based structural panels
KS F 2157-1-2007 Method of tension test for nonstructural wood-based panels
KS B 0864-2001 METHOD OF NOTCHED TENSION TESTING OF MATERIAL FOR WELDED STRUCTURE
KS F ISO 2394-2002(2021) General principles on reliability for structures
KS B ISO 6971:2013 Cranked－link drag chains of welded construction, attachments and sprockets
KS B ISO 6971:2005 Cranked-link drag chains of welded construction, attachments and sprockets
KS D 3503-2014 Rolled steels for general structure
KS B 8020-2016 General rules for structure of oil burning appliances
KS B 8102-2011 General constructions of gas burning appliances
KS D 3503-2008 Rolled steels for general structure
KS B 8020-2016(2021) General rules for structure of oil burning appliances
KS B 8020-2010 General rules for structure of oil burning appliances
KS B 8020-2022 General rules for structure of oil burning appliances

RU-GOST R

GOST 18794-1980 Tension springs. Design and dimensions
GOST 24540-1980 Connection strips. Design and dimensions
GOST 18220-1990 Key broaches for higher class roughness. Design
GOST 13160-1967 Fixing devices with retractable handle for machine retaining devices. Design and dimensions
GOST 26479-1985 Double-pass square broaches for holes with sides from 12,5 to 60 mm. Design and dimensions
GOST 26478-1985 Double-pass square broaches for holes with sides from 10 to 12 mm. Design and dimensions
GOST 22362-1977 Reinforced concrete structures. Methods for determination of reinforcement tensioning forse
GOST R 59700-2021 Krasnodar tea. Specification
GOST R ISO 12003-1-2011 Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors. Part 1. Front-mounted ROPS. Technical requirements and teat methods
GOST 12200-1966 Holding devices. Eye-screws for tension spring. Design
GOST 12199-1966 Holding devices. Groove screws for tension springs. Design
GOST 26480-1985 Square broaches for holes with sides from 25 to 41 mm. Design and dimensions
GOST 24541-1980 Locks of removable die parts. Design and dimensions
GOST 20364-1974 Round broaches of variable cutting of diameters from 10 to 13 mm. Design and dimensions

UNKNOWN

YB/T 037-93 High quality structural steel cold drawn flat steel

IET - Institution of Engineering and Technology

CORRSPDC MICHAL FARADY VOL 6-2011 The Correspondence of Michael Faraday@ Volume 6: 1860-1867
CORRSPDC MICHAL FARADY VOL 2-1993 The Correspondence of Michael Faraday@ Volume 2: 1832-1840
CORRSPDC MICHAL FARADY VOL 3-1996 The Correspondence of Michael Faraday@ Volume 3: 1841-1848
CORRSPDC MICHAL FARADY VOL 1-1991 The Correspondence of Michael Faraday@ Volume 1: 1811-1831
CORRSPDC MICHAL FARADY VOL 4-1999 The Correspondence of Michael Faraday@ Volume 4: 1849-1855
CORRSPDC MICHAL FARADY VOL 5-2008 The Correspondence of Michael Faraday@ Volume 5: 1855-1860

IN-BIS

IS 9329-1979 Specifications of speculum, eye, clark pattern
IS 9307 Pt.5-1979 Test Methods for Sandwich Structures of Timber-Based Structures Part V Horizontal Tensile Test
IS 2783-1976 Specifications of Jersey Wool Balaclava
IS 1057-1968 Commercial Metric Carat Weight Specifications
IS 7756-1975 Standards for depressor muscles, tongue, and rake lines

American Society for Testing and Materials (ASTM)

ASTM D3500-90(1995)e1 Standard Test Methods for Structural Panels in Tension
ASTM D3500-20 Standard Test Methods for Wood Structural Panels in Tension
ASTM D3500-14 Standard Test Methods for Structural Panels in Tension
ASTM D3500-90(2009) Standard Test Methods for Structural Panels in Tension
ASTM C297-94(1999) Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM C297/C297M-16 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM C297/C297M-15 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

Japanese Industrial Standards Committee (JISC)

JIS G 3129:2005 High tensile strength steel for tower structural purposes
JIS G 3129:1995 High tensile strength steel for tower structural purposes
JIS G 3474:1995 High tensile strength steel tubes for tower structural purposes
JIS X 3016:2006 CLI: Common Language Infrastructure
JIS P 8143:2009 Paper -- Determination of stiffness -- Clark stiffness tester method
JIS P 8143:1996 Paper -- Determination of stiffness by Clark stiffness tester
JIS G 3101:2020 Rolled steels for general structure
JIS G 3444:2021 Carbon steel tubes for general structure
JIS S 3030:2001 General rules for construction of oil burning appliances
JIS S 3030:1996 General rules for construction of oil burning appliances

National Aeronautics and Space Administration (NASA)

NASA UFGS-03 41 33-2011 PRECAST STRUCTURAL PRETENSIONED CONCRETE

German Institute for Standardization

DIN 1415-1:1973 Broaches; classification, nomenclature, designs
DIN EN 1993-1-11:2007 Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components; German version EN 1993-1-11:2006
DIN EN 1993-1-11:2010-12 Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components; German version EN 1993-1-11:2006 + AC:2009
DIN EN 1382:2016-07 Timber structures - Test methods - Withdrawal capacity of timber fasteners; German version EN 1382:2016
DIN 53292:1982 Testing of sandwiches; Tensile test perpendicular to the faces
DIN EN 1383:2016-07 Timber structures - Test methods - Pull through resistance of timber fasteners; German version EN 1383:2016
DIN EN 1542:1999-07 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off; German version EN 1542:1999

Association Francaise de Normalisation

NF P22-381/NA*NF EN 1993-1-11/NA:2007 Eurocode 3 - Design of steel structures - Part 1-11 : design of structures with tension components - National Annex to NF EN 1993-1-11:2007 - Design of structures with tension components
NF T54-603:1983 Plastic-based sandwich structures - Perpendicular tensile test
NF P22-381*NF EN 1993-1-11:2007 Eurocode 3 : design of steel structures - Part 1-11 : design of structures with tension components
NF P22-466:1979 Metal construction. Jointing by means of bolts with controlled tightening. Methods of tightening and checking of bolts.
NF P22-460:1979 Metal construction. Jointing by means of bolts with controlled tightening. Structures requirements and checking of jointing.
NF P22-463:1978 Metal construction. Jointing by means of bolts with controlled tightening. Execution of joints.
NF P21-378*NF EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners
XP ISO/TS 4640:2023 Oral medicine - Test methods for tensile adhesion to tooth structure

FI-SFS

SFS 2940-1973 Logging tractor. Overall structure determination

KR-KS

KS D 3777-2018(2023) High tensile strength steel tubes for tower structural purposes
KS F 2157-1-2023 Method of tension test for nonstructural wood-based panels
KS F 2157-2-2023 Method of tension test for structural wood-based panels

VDI - Verein Deutscher Ingenieure

VDI 2161-1961 Muelltonnenschraenke

GB-REG

REG NASA-LLIS-1056--1999 Lessons Learned - X-33 Structural Test Article (STA) Tank Incident

Defense Logistics Agency

DLA A-A-50194 B-2003 HOOD, BALACLAVA, EXTENDED COLD WEATHER

U.S. Military Regulations and Norms

ARMY MIL-DTL-3943/319 B VALID NOTICE 1-2013 Medal, Iraq Campaign
ARMY MIL-DTL-11589/594 A-2010 RIBBON, IRAQ CAMPAIGN MEDAL
ARMY MIL-H-44265 A-1990 HOOD, COMBAT VEHICLE CREWMEN'S (BALACLAVA)
ARMY MIL-DTL-11484/313 B-2010 LAPEL BUTTON, IRAQ CAMPAIGN MEDAL

YU-JUS

JUS M.L1.610-1978 Agricultural tractors - Construction recommendations for cabs
JUS G.E3.603-1981 Tractor tyres. Agricultural steering wheels. Diagonal construction
JUS G.E3.601-1981 Tractor tyres. Agricultural steering wheels. Diagonal constmction

Indonesia Standards

SNI 01-7234-2006 Standard shape of bottom lampara dragging trawl construction
SNI 01-7233-2006 Standard shape of arad rigger trawl construction

ET-QSAE

ES A.C2.051-1973 weight metric carat weight

IFI/FASTNR - Industrial Fastener Institute

130-1986 Structural Splitting Self-Plugging Pull Mandrel Blind Rivets
130-2003 Structural Splitting Self-Plugging Pull Mandrel Blind Rivets
119-1986 Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
530-1982 Metric Structural Splitting Self Plugging Pull Mandrel Blind Rivets
119-2003 Standard for Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
521-1982 Metric Structural Self Plugging Pull Mandrel Blind Rivets - Type 2B
551-1999 Metric Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets

Danish Standards Foundation

DS/EN 1993-1-11:2007 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
DS/EN 1993-1-11/AC:2009 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
DS/EN 1383:2000 Timber structures - Test methods - Pull through resistance of timber fasteners

Lithuanian Standards Office

LST EN 1993-1-11-2007 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
LST EN 1993-1-11-2007/AC-2009 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
LST EN 1383-2000 Timber structures - Test methods - Pull through resistance of timber fasteners

AENOR

UNE-EN 1993-1-11:2015 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components

International Organization for Standardization (ISO)

ISO/TS 4640 Dentistry — Test methods for tensile bond strength to tooth structure
ISO 6971:2002 Cranked-link drag chains of welded construction, attachments and sprockets

ACI - American Concrete Institute

ACI SP-208-2003 Examples for the Design of Structural Concrete with Strut-and-Tie Models
ACI SP-273-2010 Further Examples for the Design of Structural Concrete with Strut-and-Tie Models
ACI SP-273-2011 Further Examples for the Design of Structural Concrete with Strut-and-Tie Models

ZA-SANS

SANS 1482:2008 Ladies' shoes, flat lasted, with stuck-on outer soles
SANS 1492-1:2000 Men's shoes with stuck-on outer soles Part 1: Flat lasted construction

GSO

GSO ISO 8340:2007 Building construction - Sealants - Determination of tensile properties at maintained extension
GSO EN 1542:2021 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
BH GSO EN 1542:2022 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
BH GSO ISO 11527:2016 Building construction -- Sealants -- Test method for the determination of stringiness
GSO 1584:2002 Agricultoral equipment - roll over protection structures for agricultural tractors.
OS GSO 1584:2002 Agricultoral equipment - roll over protection structures for agricultural tractors.

NZ-SNZ

NZS 3422:1975 WELDED FABRIC OF DRAWN STEEL WIRE FOR CONCRETE REINFORCEMENT

AIA/NAS - Aerospace Industries Association of America Inc.

NASM20600-1999 Rivet@ Blind@ Structural Pull Stem@ Self-Plugging@ Protruding Head@ Type II

Society of Automotive Engineers (SAE)

SAE CPGM1_L92-2006 J1349 Certified Power Engine Data for GM L92 as used in 2007 Cadillac Escalade, Cadillac Escalade ESV and Cadillac Escalade EXT Level 1
SAE CPGM2_L92-2006 J1349 Certified Power Engine Data for GM L92 as used in 2007 Cadillac Escalade, Cadillac Escalade ESV, Cadillac Escalade EXT Level 2
SAE J2194-1987 Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors
SAE J1194-1999 Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors
SAE J2194-2002 Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors
SAE J1194-1977 Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors
SAE J2194-2009 Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors
SAE J1194-1994 ROLLOVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS
SAE J2194-1993 ROLL-OVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS
SAE J2194-1997 ROLL-OVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS
SAE J1194-2009 Rollover Protective Structures (ROPS) for Wheeled agricultural tractors
SAE J1194-1983 ROLL-OVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS

RO-ASRO

STAS 500/2-1980 STRUCTURAI. STEELS FOR GENERAL PURPOSE Grades

HU-MSZT

MNOSZ 10473-1952 Surgical equipment. Chladni stethoscope
MNOSZ 11973-1953 Surgical equipment. Kravusser nose forceps

CEN - European Committee for Standardization

EN 1383:1999 Timber Structures - Test Methods - Pull-Through Resistance of Timber Fasteners

SAE - SAE International

SAE J2194-2016 Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors
SAE J1194-2016 Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors
SAE J1194-1989 ROLLOVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS

SE-SIS

SIS 11 01 36-1965 Sampling for tensile testing and structure inspection of .spheriodal cast iron

American Concrete Institute

ACI SP-208-2002 Examples for the Design of Structural Concrete with Strut-and-Tie Models

American Bureau of Shipping

ABS 2 IACS NOTICE 3-2008 Common Structural Rules for Oil Tankers

IPC - Association Connecting Electronics Industries

IPC TM-650 2.1.3A-1976 Plated Through Hole Structure Evaluation

Cooling Technology Institute

CTI STD-137-2014 Fiberglass Pultruded Structural Products for Use in Cooling Towers
CTI STD-137-2003 Fiberglass Pultruded Structural Products for Use in Cooling Towers
CTI STD-137-2013 Fiberglass Pultruded Structural Products for Use in Cooling Towers
CTI STD-137-2007 Fiberglass Pultruded Structural Products for Use in Cooling Towers

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM20600-1999 Rivet, Blind, Structural Pull Stem, Self-Plugging, Protruding Head, Type II

ES-UNE

UNE-EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners
UNE-EN 1382:2016 Timber Structures - Test methods - Withdrawal capacity of timber fasteners

ESDU - Engineering Sciences Data Unit

FAT E.05.01 A-1977 Endurance of structural joints. (Aluminium alloy material - tensile loading.)