Secondary mass spectrometry analysis
Secondary mass spectrometry analysis, Total:266 items.
The international standard classification for "Secondary mass spectrometry analysis" includes: Chemical analysis , Biology. Botany. Zoology , Organic chemicals in general , Cosmetics. Toiletries , Rubber , Textiles in general , Laboratory medicine , Protection against crime .
The Chinese standard classification for "Secondary mass spectrometry analysis" includes: Basic standards and general methods , Basic Subject in general , Organic chemicals in general , Cosmetics , Electron optics and other physical optics instrument , Rubber products in general , Basic standards and general methods , Medical laboratory equipment , Electrochemical, thermochemistry and optical profile type analyzer , Technical Management , Crime judging technology , chromatograph .
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 29613.2-2014 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2:Determination of styrene/butadiene/isoprene ratio
- GB/T 6041-2002 General rules for mass spectrometric analysis
- GB/T 40109-2021 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon
- GB/T 40129-2021 Surface chemical analysis—Secondary ion mass spectrometry—Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
- GB/T 39699-2020 Rubber. Identification of polymers. Pyrolytic gas-chromatographic method using mass-spectrometric detection
- GB/Z 35959-2018 General rule for liquid chromatography-mass spectrometry
- GB/Z 32494-2016 Surface chemical analysis—Auger electron spectroscopy—Derivation of chemical information
- GB/T 33682-2017 General microganism identification method with matrix-assisted laser desorption/ionization time of flight mass spectrometry
- GB/T 20176-2006 Surface chemical analysis-Secondary-ion mass spectrometry-Determination of boron atomic concentration in silicon using uniformly doped materials
- GB/T 6041-2020 General rules for mass spectrometric analysis
- GB/T 40896-2021 Determination of diethylene glycol monoethyl ether in cosmetics—Gas chromatography mass spectrometry
- GB/T 43663-2024 Surface chemical analysis—Secondary-ion mass spectrometry—Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- GB/T 32495-2016 Surface chemical analysis—Secondary-ion mass spectrometry—Method for depth profiling of arsenic in silicon
- GB/T 41064-2021 Surface chemical analysis—Depth profiling—Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
- SN/T 4573-2016 Determination of bis(2-methoxy ethyl)ether in coatings、inks and adhesives- Gas chromatography/mass spectrometry
- GB/T 25186-2010 Surface chemical analysis—Secondary-ion mass spectrometry—Determination of relative sensitivity factors from ion-implanted reference materials
Professional Standard - Post and Telecommunication
- YD/T 6121-2024 Identification and resolution system for the Industrial Internet—Testing specification for interface between national-level node and secondary-level node
- YD/T 6120-2024 Identification and resolution system for the Industrial Internet — Technical requirements for interface between national-level node and secondary-level node
- YD/T 6122-2024 Identification and resolution system for the Industrial Internet — Technical requirements for secondary-level nod
- YD/T 6123-2024 Identification and resolution system for the Industrial Internet ——Testing specification for secondary-level node
Professional Standard - Textile
- FZ/T 01148-2019 Textiles—Determination of adipicdihydrazide—Method using LC-MS/MS
- FZ/T 01164-2022 Textiles-Screening of phthalates-Pyrolysis-gas chromatography-mass spectrometry method
Professional Standard - Medicine
- YY/T 0589-2016 Electrolyte analyzer
- YY/T 0589-2005 Electrolyte analyzer
National Metrological Verification Regulations of the People's Republic of China
- JJG 1051-2009 Electrolyte Analyzers
- JJG 1051-2021 Electrolyte Analyzers
Zhejiang Provincial Standard of the People's Republic of China
- DB33/T 542-2005 Determination of chloramphenicol residues in aquatic products by gas chromatography-secondary mass spectrometry
Heilongjiang Provincial Standard of the People's Republic of China
- DB23/T 3079-2022 Heilongjiang Industrial Internet logo analysis (comprehensive) secondary node logo assignment rules
- DB23/T 3081-2022 Heilongjiang Industrial Internet Logo Analysis (Comprehensive) Secondary Node Operation Specification
Professional Standard - Commodity Inspection
- SN/T 3543-2013 Determination of hexabromocyclododecane (HBCD) in food for export - Liquid chromatography-tandem mass spectrometry method
- SN/T 3847-2014 Determination of benzodiazepines in foods for export - Liquid chromatogram-Mass spectrum or mass-spectrography
- SN/T 5308-2021 Determination of benzene, toluene, chlorobenzene, p-Xylene ando-Xylene in food-grade lubricating oils - Headspace-chromatographyl mass spectrometry
- SN/T 5342-2021 Textiles for import and export - Determination of phthalates - Pyrolysis-Gas chromatography-mass spectrometry qualitative screening method
- SN/T 3123-2012 Determination of musk xylene in detergent products-Gas chromatography-tandem mass spectrometry
- SN/T 3119-2012 Determination of distearyl dimethyl ammonium chloride in dyeing and finishing textile agents-LC-MS/MS
Professional Standard - Machinery
- JB/T 7404-1994 Analyzer of Electrolyte Natrium and Potassium
Taiwan Provincial Standard of the People's Republic of China
- CNS 12509-1989 General Rules Analytical Methods in Gas Chromatography/Mass Spectrometry
- CNS 12511-1989 General Rules for Mass Spectrometric Analysis
Professional Standard - Electron
- SJ/T 10553-1994 Method of emission spectrochemical analysis of impurities in ZrO2 for use in electron ceramics
- SJ/T 10552-1994 Method of emission specthochemical analysis of impurities in TiO2 for use in electron ceramics
- SJ/T 10551-2021 The measurement of emission spectrum analysis for aluminium oxide used in electronic ceramics
- SJ/T 10553-2021 Method of emission specthchemical analysis of impurities in ZrO2 for use in electron ceramics
- SJ/T 10551-1994 Method of emission spectrochemical analysis of impurities in AL203 for use in electron ceramics
- SJ/T 10552-2021 Method of emission specthchemical analysis of impurities in TiO2 for use in electron ceramics
Professional Standard - Petroleum
- SY/T 6188-1996 Analytical Method of Rock Pyrolysis by Gas Chromatography
- SY/T 7315-2016 Comprehensive two-dimensional gas chromatography component analysis method for condensate oil
- SY/T 6188-2016 Analysis method for rock pyrolysis gas chromatography
Professional Standard - Judicatory
- SF/T 0108-2021 Forensic examination of paint evidence—Pyrolysis-gas chromatography / mass spectrometry
Group Standards of the People's Republic of China
- T/ZPP 017-2023 Mass Cytometry Analyzer
- T/SIA 023.1-2021 Service capability maturity for Secondary-Level node of identification and resolution system of industrial internet—Part 1:Model
- T/HATSI 0021-2022 Identification and resolution for the industrial internet—Secondary node application service platform—Data interface specification
- T/CNTAC 151-2023 Textiles—Screening method of benzotriazoles—Pyrolysis-gas chromatography-mass spectrometry method
- T/SIA 023.2-2021 Service capability maturity for Secondary-Level node of identification and resolution system of industrial internet—Part2: Assessment method
Professional Standard - Education
- JY/T 0572-2020 General rules for analytical methods for circular dichroism spectroscopy
- JY/T 003-1996 General principles for organic mass spectrometry
Professional Standard - Environmental Protection
- HJ 909-2017 Water quality - Determination of polybrominated diphenyl ethers - Gas chromatography mass spectrometry
未注明发布机构
- FORD FLTM EU-AZ 053-01-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS
- FORD FLTM EU-AZ 053-1-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS
Professional Standard - Agriculture
- SN/T 5074-2018 Determination of dimethyl yellow in foods for export - LC-MS/MS Method
- 空气和废气监测分析方法 7.1.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter 1 Basic Theory of Chemical Mass Balance (CMB) Receptor Model Two Basic Principles of Double Source Apportionment Technology
National Health Commission of the People's Republic of China
- GB 23200.33-2016 National food safety standard―Determination of Benoxacor, Anilofos, Allidochlor 110 pesticides residues in foods Gas chromatography-mass spectrometry
Professional Standard - Geology
- DZ/T 0064.87-2021 Methods for analysis of groundwater quality- Part 87: Determination of δ13C - Online method for acidolysis by phosphoric acid- gas isotope ratio mass spectrometry
American Society for Testing and Materials (ASTM)
- ASTM C696-11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
- ASTM C696-99 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
- ASTM C696-19 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
- ASTM C697-98 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
- ASTM C696-99(2005) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
- ASTM C697-24 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
- ASTM C697-16 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
- ASTM C697-10 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
- ASTM RR-C26-1000 1976 C0791-Methods for Chemical, Mass Spectrometric, Spectrochemical Analysis of Nuclear-Grade Boron Carbide
- ASTM E1504-11 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
- ASTM C697-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
- ASTM C791-83(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
- ASTM RR-C26-1012 2003 C0791-Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
- ASTM C791-19 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
- ASTM C791-24 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
- ASTM C791-12 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
- ASTM C791-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
- ASTM C759-10 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
- ASTM C698-16 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O
2 ) - ASTM E1881-12 Standard Guide for Cell Culture Analysis with SIMS
- ASTM C791-11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
- ASTM UOP1015-17 Determination of Trace Oxygenates in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry
- ASTM C809-94(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite Pellets
- ASTM C698-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O 2 )
- ASTM C758-04(2010) Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
- ASTM E1881-06 Standard Guide for Cell Culture Analysis with SIMS
- ASTM C799-19 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
- ASTM C758-18 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
- ASTM C698-98 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O 2 )
- ASTM C698-24 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O<inf>2</inf>)
- ASTM UOP1023-18 Determination of Trace Arsine and Phosphine in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometry
- ASTM C889-06 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd 2 O 3 ) Powder
- ASTM C759-18 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
- ASTM C889-11 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd 2 O 3 ) Powder
British Standards Institution (BSI)
- BS ISO 13084:2018 Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
- BS ISO 13084:2011 Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
- BS ISO 20411:2018 Surface chemical analysis. Secondary ion mass spectrometry. Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
- BS ISO 10638:2017 Rubber. Identification of antidegradants by gas chromatography/mass spectrometry
- BS ISO 10638:2010 Rubber - Identification of antidegradants by gas chromatography/mass spectrometry
- 25/30500395 DC BS ISO 13084 Surface chemical analysis — Secondary ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
- 10/30199193 DC BS ISO 13084. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time of flight secondary ion mass spectrometer
- BS ISO 12406:2010 Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of arsenic in silicon
- BS ISO 7270-2:2024 Rubber. Analysis by pyrolytic gas-chromatographic method - Determination of styrene/butadiene/isoprene ratio
- BS ISO 17858:2007 Water quality - Determination of dioxin-like polychlorinated Biphenyls - Method using gas-chromatography/mass spectrometry
- BS ISO 20341:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials
- BS ISO 7270-2:2012 Rubber. Analysis by pyrolytic gas-chromatographic methods. Determination of styrene/butadiene/isoprene ratio
- BS ISO 22048:2004 Surface chemical analysis. Information format for static secondary-ion mass spectrometry
- BS ISO 22048:2004(2005) Surface chemical analysis — Information format for static secondary - ion mass spectrometry
- BS ISO 7270-2:2005 Rubber. Analysis by pyrolytic gas-chromatographic methods. Determination of styrene/butadiene/isoprene ratio
- 10/30199169 DC BS ISO 12406. Surface chemical analysis. Secondary ion mass spectrometry. Method for depth profiling of arsenic in silicon
- BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
- 07/30138812 DC BS ISO 23830. Surface chemical analysis. Secondary-ion mass spectrometry. Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- BS EN IEC 62321-3-3:2021 Determination of certain substances in electrotechnical products - Screening. Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption…
- 23/30447641 DC BS EN IEC 62321-8. Determination of certain substances in electrotechnical products - Part 8. Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption…
- BS ISO 23830:2008 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- BS ISO 17862:2013 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
- 10/30195776 DC BS ISO 7270-2. Rubber. Analysis by pyrolytic gas-chromatographic methods. Part 2. Determination of styrene/butadiene/isoprene ratio
- 20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
- BS ISO 23812:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
- BS ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
- BS EN 14047:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
- BS EN 14047:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
- BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials
- BS ISO 18256-1:2019 Nuclear fuel technology. Dissolution of plutonium dioxide-containing materials-Dissolution of plutonium dioxide powders
- BS EN 12441-8:2004 Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method
International Organization for Standardization (ISO)
- ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
- ISO 13084:2018 Surface chemical analysis — Secondary ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
- ISO 10638:2010 Rubber - Identification of antidegradants by gas chromatography/mass spectrometry
- ISO 10638:2017 Rubber - Identification of antidegradants by gas chromatography/mass spectrometry
- ISO 12406:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of arsenic in silicon
- ISO/TS 22933:2022 Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
- ISO 20341:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials
- ISO 22048:2004 Surface chemical analysis — Information format for static secondary-ion mass spectrometry
- ISO 17560:2014 Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth profiling of boron in silicon
- ISO 7270-2:2005 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio
- ISO 7270-2:2012 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio
- ISO 7270-2:2024 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
- ISO 23830:2008 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 20411:2018 Surface chemical analysis - Secondary ion mass spectrometry - Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
- ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO 22032:2006 Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry
- ISO 14237:2000 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
- ISO 21701:2019 Textiles —Test method for accelerated hydrolysis of textile materials and biodegradation under controlled composting conditions of the resulting hydrolysate
- ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
Kingdom of Bahrain Testing and Metrology Directorate
- BH GSO ISO 13084:2016 Surface chemical analysis -- Secondary-ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
- BH GSO ISO 17560:2016 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of boron in silicon
- BH GSO ISO 23830:2016 Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- BH GSO ISO 22048:2016 Surface chemical analysis -- Information format for static secondary-ion mass spectrometry
GCC Standardization Organization
- GSO ISO 13084:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
- GSO ISO 23830:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- GSO ISO 22048:2013 Surface chemical analysis -- Information format for static secondary-ion mass spectrometry
- GSO ISO 7270-2:2015 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2: Determination of styrene/butadiene/isoprene ratio
- GSO ISO 18114:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of relative sensitivity factors from ion-implanted reference materials
- GSO ISO 12406:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of arsenic in silicon
- GSO ISO 17560:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of boron in silicon
The Directorate General of Specifications and Metrology (DGSM)
- OS GSO ISO 13084:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
- OS GSO ISO 23830:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- OS GSO ISO 12406:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of arsenic in silicon
- OS GSO ISO 22048:2013 Surface chemical analysis -- Information format for static secondary-ion mass spectrometry
- OS GSO ISO 17858:2010 Water quality- Determination of dioxin-like polychlorinated biphenyls- Method using gas chromatography/ mass spectrometry
AT-ON
- ONORM M 6238 Teil.1-1986 Water analysis; determination ofnitrate; 2,6-dimethylphenol spectrometric method
- ONORM M 6612-2001 Water analysis - Calcit saturation of water
RO-ASRO
- STAS SR 12271-18-1996 Uranium dioxide. Uranium isotopic analysis by mass spectrometry
Japanese Industrial Standards Committee (JISC)
- JIS K 0157:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
- JIS K 6241:2012 Rubber -- Identification of antidegradants by gas chromatography/mass spectrometry
- JIS K 0164:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of boron in silicon
- JIS K 0153:2015 Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- JIS K 0158:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
- JIS K 6231-2:2007 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2: Determination of styrene, butadiene, isoprene ratio
- JIS K 0168:2011 Surface chemical analysis -- Information format for static secondary-ion mass spectrometry
- JIS K 6951:2000 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by analysis of evolved carbon dioxide
- JIS K 0118:1979 General rules for mass spectrometric analysis
- JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
- JIS K 0123:1995 General rules for analytical methods in gas chromatography mass spectrometry
Magyar Szabványügyi Testület
- MSZ 11596-1983 Resolution (2) Mineral water, analytical function
- MSZ 7370-1961 Carbon disulfide for analytical purposes
Korean Agency for Technology and Standards (KATS)
- KS D ISO 20341:2005 Surface chemical analysis-Secondary-ion mass spectrometry-Method for estimating depth resolution parameters with multiple delta-layer reference materials
- KS D ISO 22048-2020 Surface chemical analysis - Information format for static secondary-ion mass spectrometry
- KS D ISO 22048-2005(2020) Surface chemical analysis - Information format for static secondary-ion mass spectrometry
- KS M ISO 7270-2:2017 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
- KS M ISO 7270-2:2007 Rubber-Analysis by pyrolytic gas-chromatographic methods-Part 2:Determination of styrene/butadiene/isoprene ratio
- KS D ISO 17560-2003(2023) Surface chemical analysis - Secondary ion mass spectrometry - Boron depth distribution measurement method in silicon
- KS M 0025-2008(2023) General rules for mass spectrometric analysis
- KS M ISO 7270-2-2017(2022) Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
- KS M ISO 7270-2-2022 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
- KS M ISO 7270-2-2017 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
- KS M 0027-1993 General Rules for Analytical Methods in Gas Chromatography Mass Spectrometry
- KS M 0027-2008(2023) General rules for analytical methods in gas chromatography mass spectrometry
- KS M 0027-2023 General rules for analytical methods in gas chromatography mass spectrometry
- KS M 0025-2008(2018) General rules for mass spectrometric analysis
- KS D 1899-2003 Methods for emission spectrochemical analysis of electrolytic cathode copper
- KS I ISO 9439-2018 Water quality-Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium-Carbon dioxide evolution test
- KS M ISO 10638-2023 Rubber — Identification of antidegradants by gas chromatography/mass spectrometry
- KS M 0025-2023 General rules for mass spectrometric analysis
- KS M ISO 10638-2012(2017) Rubber-Identification of antidegradants by gas chromatography/mass spectrometry
- KS D ISO 14237-2003(2023) Surface geometry analysis - Secondary ion mass spectrometry - Method for measuring the concentration of boron atoms uniformly added in silicon
- KS I ISO 22032:2007 Water quality-Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge-Method using extraction and gas chromatography/mass spectrometry
- KS M 0025-1993 General rules for mass spectrometric analysis
- KS M ISO 10638-2012(2022) Rubber-Identification of antidegradants by gas chromatography/mass spectrometry
- KS I ISO 17858:2022 Water quality — Determination of dioxin-like polychlorinated biphenyls — Method using gas chromatography/mass spectrometry
- KS I ISO 17858-2009(2014) Water quality-Determination of dioxin-like polychlorinated biphenyls-Method using gas chromatography/mass spectrometry
- KS M 0027-2008(2018) General rules for analytical methods in gas chromatography mass spectrometry
- KS M 9101-2007 Water quality-Determination of total mercury by flameless atomic absorption spectrometry(Method after digestion with permanganate-peroxodisulfate)
- KS I ISO 17858-2022 Water quality — Determination of dioxin-like polychlorinated biphenyls — Method using gas chromatography/mass spectrometry
CN-STDBOOK
- 图书 A-5078 Analysis of answers to typical exercises of the second-level registered metrologist qualification examination (2022 edition)
American Water Works Association (AWWA)
- AWWA WQTC58782 Sub-ppb Quantitation of Perchlorate in Drinking Waters Containing High Total Dissolved Solids Using Ion Chromatography — Mass Spectrometry
Association Francaise de Normalisation
- NF ISO 23830:2009 Chemical analysis of surfaces - Mass spectrometry of secondary ions - Repeatability and constancy of the scale of relative intensities in static mass spectrometry of secondary ions
- NF ISO 17560:2006 Chemical analysis of surfaces - Mass spectrometry of secondary ions - Determination of boron in silicon by thickness profiling
- NF T46-051-2*NF ISO 7270-2:2012 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: determination of styrene/butadiene/isoprene ratio
- NF T46-051-2*NF ISO 7270-2:2024 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2 : determination of styrene/ butadiene/isoprene ratio
- NF ISO 7270-2:2024 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2 : determination of styrene/ butadiene/isoprene ratio
- NF EN 62321-8:2017 Determination of certain substances in electrotechnical products - Part 8: Analysis of phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry ...
- NF ISO 7270-2:2012 Caoutchouc - Méthodes d'analyse par pyrolyse et chromatographie en phase gazeuse - Partie 2 : détermination du rapport styrène/butadiène/isoprène
- NF M60-404:1998 Determination of plutonium content in plutonium dioxide (PuO2) of nuclear grade quality. Gravimetric method.
- NF C05-100-8*NF EN 62321-8:2017 Determination of certain substances in electrotechnical products - Part 8 : phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS)
- NF T46-053:2003 Rubber - Identification - Pyrolytic gas and chromatographic method - Mass spectrometry detection.
- NF X21-064*NF ISO 23830:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry.
- NF X21-066*NF ISO 23812:2009 Surface chemical analysis - Secondary ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
- NF T90-306:1993 WATER QUALITY. EVALUATION IN AN AQUEOUS MEDIUM OF THE "ULTIMATE" AEROBIC BIODEGRADABILITY OF ORGANIC COMPOUDS. METHOD BY ANALYSIS OF RELEASED CARBON DIOXIDE. (EUROPEAN STANDARD EN 29439).
- NF X21-070*NF ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials.
- NF ISO 14237:2010 Chemical analysis of surfaces - Mass spectrometry of secondary ions - Determination of boron atoms in silicon using uniformly doped materials
- NF H60-147*NF EN 14047:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxyde
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)
- ASHRAE AT-01-9-3-2001 Second Law Analysis of Refrigerators and Air Conditioners
- ASHRAE 4323-2000 Comparison of Binary Mixture Heat and Mass Transfer Analysis with Single-Component Heat and Mass Transfer Analysis in the Design of GAX Absorber/Desorber
European Committee for Electrotechnical Standardization(CENELEC)
- EN 62321-8:2017 Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS)@ gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS)
Comitato Elettrotecnico Italiano
- CEI EN 62321-8:2017 Determination of certain substances in electrotechnical products Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS)
- CEI EN IEC 62321-3-3:2022 Determination of certain substances in electrotechnical products Part 3-3: Screening - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption acc...
American National Standards Institute (ANSI)
- ANSI/NEMA 62321-8-2017 Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py-TD-GC-MS) Published
Swedish Institute for Standards
- SS-EN 62321-8:2017 Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py-TD-GC-MS)
- SS-ISO 7270-2:2024 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio (ISO 7270-2:2024, IDT)
- SS-ISO 7270-2:2005 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio (ISO 7270-2:2005, IDT)
- SS-EN 16215:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS
- SS-EN 14047:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
German Institute for Standardization
- DIN EN 62321-8 E:2014 Draft Document - Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by Pyrolyzer Gas Chromatography-Mass Spectrometry (Py-GC-MS), Ion Attachment Mass Spectrometry (IAMS), Gas Chromatography-Mass Spectromet...
- DIN 55689:2006 Solvents for paints and varnishes - Propylene glycol ethers - Gas chromatographic determination of the degree of purity
- DIN EN 62321-8 E:2014-01 Draft Document - Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by Pyrolyzer Gas Chromatography-Mass Spectrometry (Py-GC-MS), Ion Attachment Mass Spectrometry (IAMS), Gas Chromatography-Mass Spectromet...
- DIN 55688:2006 Solvents for paints and varnishes - Ethylene glycol ethers - Gas chromatographic determination of the degree of purity
- DIN EN IEC 62321-3-3:2023 Determination of certain substances in electrotechnical products - Part 3-3: Screening - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption ac...
IT-UNI
- UNI 3658-1955 Procedures for chemical analysis of minerals. Determination of titanium in iron ore. Photometric and colorimetric methods for disaggregation with sodium peroxide.
- UNI 3895-1957 Procedures for the chemical analysis of minerals. Determination of the silica content of chrome minerals. Sodium peroxide disaggregation method.
- UNI 3893-1957 Procedures for the chemical analysis of minerals. Determination of the chrome content of chrome minerals. Volumetric method by means of disaggregation with sodium peroxide.
- UNI 3894-1957 Procedures for the chemical analysis of minerals. Determination of the total iron content of chrome minerals. Volumetric method by means of disaggregation with sodium peroxide.
Gosstandart of Russia
- GOST ISO/TR 18818-2020 Perfumery and cosmetic products. Analytical methods. Detection and quantitative determination of diethanolamine by GC/MS
- GOST R 56240-2014 Copper. Spectral methods of impurity analysis
- GOST 34868-2022 Wine products. Determination of composition of the dissolved carbon dioxide using isotope ratio mass spectrometry method IRMS/SIRA
Standard Association of Australia (SAA)
- AS ISO 22048:2006 Surface chemical analysis - Information format for static secondary-ion mass spectrometry
- AS ISO 22048:2006(R2016) Surface chemical analysis - Information format for static secondary-ion mass spectrometry
- AS ISO 17560:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon
Bureau of Indian Standards
- IS 16197-3-3-2024 Determination of Certain Substances in Electrotechnical Products - Part 3 Screening - Section 3 Polybrominated Biphenyls Polybrominated Diphenyl Ethers and Phthalates in Polymers by Gas Chromatography-Mass Spectrometry Using a Pyrolyser/Thermal Desorption
- IS 16197-8-2020 Determination of Certain Substances in Electrotechnical Products Part 8 Phthalates in Polymers by Gas Chromatography - Mass Spectrometry ( GC-MS ), Gas Chromatography - Mass Spectrometry Using a Pyrolyzer / Thermal Desorption Accessory ( Py-TD-GC-MS )
European Committee for Standardization (CEN)
- EN 17200:2023 Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates and digests - Analysis by inductively coupled plasma mass spectrometry (ICP-MS)
- EN 14047:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
- EN 16521:2014 Cosmetics - Analytical methods - GC/MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injection
Defense Logistics Agency
- DLA QPL-8971-10-2004 ELECTRODES, GRAPHITE, SPECTROMETRIC GRADE
Ente Nazionale Italiano di Unificazione
- UNI EN 16215:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS
National Association of Corrosion Engineers
- NACE AMPP Guide 21555-2024 Water Analysis for Corrosion Prediction - Sampling Analysis and Interpretation
US-FCR
- FCR FED H-08-4 VOL 1 24J-1969 TYPICAL DIAGRAMIC DETAILS FOR LEAD SHIELDING (SECONDARY PROTECTION)
Spanish Association for Standardization (UNE)
- UNE-EN IEC 62321-3-3:2021 Determination of certain substances in electrotechnical products - Part 3-3: Screening - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption ac...
Association for Electrical, Electronic & Information Technologies (VDE)
- VDE 0042-1-3-3-2018 Determination of certain substances in electrotechnical products - Part 3-3: Screening of polybrominated biphenyls@ polybrominated diphenyl ethers and phthalates in polymers by pyrolysis (Py-GC-MS) or thermal desorption (TD-GC-MS) gas chromatography-mass
Danish Standards Foundation
- DANSK DS/ISO 17858:2007 Water quality - Determination of dioxin-like polychlorinated biphenyls - Method using gas chromatography/mass spectrometry
Standards Norway
- NS-ISO 9439:1990 Water quality — Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds — Method by analysis of released carbon dioxide
Mass spectrometry,Secondary mass spectrometry analysis,Peptide MS analysis,Peptide Mass Spectrometry Analysis,Mass spectrometry,Mass spectrometry secondary analysis,field analysis mass spectrometry,Secondary Spectrum Analysis,In-flight mass spectrometry analysis,Analysis of MS/MS,MS analysis,Quinone Mass Spectrometry Analysis,Mass spectrometry method,Secondary mass spectrometry analysis,Mass spectrometry analysis 01,analytical ionization mass spectrometry,Analysis of mass spectrum,field analysis mass spectrometry,How to analyze mass spectrum,In-flight mass spectrometry analysis