Test Equipment Template

Test Equipment Template, Total:238 items.

The international standard classification for "Test Equipment Template" includes: Test conditions and procedures in general , Reinforced plastics , Environmental testing , Electrical engineering in general , Construction equipment .

The Chinese standard classification for "Test Equipment Template" includes: Reliability and maintainability , Fibre reinforced composites , Basic standards and general methods , Medical ultrasound, laser, high-frequency instrument and equipment , Casting equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5170.2-2017 Inspection methods for environmental testing equipments―Part 2:Temperature testing equipments
GB 7288.2-1987 Equipment reliability testing; Preferred test conditions; Equipment for stationary use in weather protected locations; High degree of simulation
GB/T 5170.9-2017 Inspection methods for environmental testing equipments―Part 9:Solar radiation testing equipments
GB/T 7288.2-1987 Equipment reliability testing--Preferred test conditions--Equipment for stationary use in weather protected locations--High degree of simulation
GB 5080.2-1986 Equipment reliability testing - Guidance for the design of test cycles
GB/T 27797.8-2011 Fibre-reinforced plastics—Methods of producing test plates—Part 8:Compression moulding of SMC and BMC
GB/T 27797.6-2011 Fibre-reinforced plastics—Methods of producing test plates—Part 6:Pultrusion moulding
GB/T 5170.8-2008 Inspection methods for environmental testing equipments for electric and electronic products—Salt mist testing equipments
GB/T 5170.22-2024 Inspection methods environmental testing equipment—Part 22:The equipment for acoustic vibration test in reverberation field
GB/T 27797.4-2013 Fibre-reinforced Plastics - Methods of Producing Test Plates - Part 4: Moulding of Prepregs
GB/T 27797.7-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding
GB/T 5080.2-1986 Equipment reliability testing--Guidance for the design of test cycles
GB 7288.1-1987 Equipment reliability testing; Preferred test conditions; Indoor portable equipment; Low degree of simulation
GB/T 5170.2-2008 Inspection methods for environmental testing equipments for electric and electronic products - Temperature testing equipments
GB/T 5170.5-2008 Inspection methods for environmental testing equipments for electric and electronic products - Damp heat testing equipments
GB/T 27797.2-2011 Fibre-reinforced plastics—Methods of producing test plates—Part 2:Contact and spray-up moulding
GB/T 7288.1-1987 Equipment reliability testing--Preferred test conditions--Indoor portable equipment--Low degree of simulation
GB/T 5170.8-2017 Inspection methods for environmental testing equipments―Part 8:Salt mist testing equipments
GB/T 5170.20-2022 Inspection methods for environmental testing equipments—Part 20：Water testing equipments
GB/T 27797.3-2011 Fibre-reinforced plastics—Methods of producing test plates—Part 3:Wet compression moulding
GB/T 5170.11-2017 Inspection methods for environmental testing equipments—Part 11: Corrosive gas testing equipments
GB/T 27797.9-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of GMT/STC

Professional Standard - Medicine

YY/T 0108-2008 Testing methods for M-mode of ultrasonic diagnostic equipment

Professional Standard - Construction Industry

JGJ/T 414-2018 Standard for test of construction formwork and scaffold
JG/T 5020.2-1992 Testing method of steel form cleaning machine

Group Standards of the People's Republic of China

T/XAI 10-2021 Test equipment for impedance value of package substrate
T/CEEIA 704-2023 Electrical equipment performance test under the working condition of artificial simulated high altitude

Professional Standard - Machinery

JB/T 13398-2018 Wide heavy plate mill. Acceptance standard

Professional Standard - Electron

SJ/Z 9065-1987 Laboratory equipment

Professional Standard - Energy

NB/T 11568.9-2024 Calibration procedures for geotechnical testing equipment for hydropower projects Part 9: Permeable panels

Magyar Szabványügyi Testület

MSZ 6008-1958 Template temperature measurement equipment. round template
MNOSZ 17105-1953 Conical scale plate gap. For taper gauge equipment between templates
MSZ 6029-1958 Template temperature measurement equipment. Device connection ring
MSZ 6555-1959 Mobile template. Processing template flow equipment with 30-100 mm
MSZ 6026-1.lap-1958 Template temperature measurement equipment. Light product double tail equipment
MNOSZ 17104-1953 Symmetry calculation of cone template. Trough type conical formwork equipment. Exterior wall cone
MSZ 6001-1986 Tube form template. Temperature measuring equipment
MNOSZ 17103-1953 Template cork cone. Trough type formwork equipment is used for external production. Content definition
MSZ 6016-1.lap-1958 Template temperature measurement equipment. Premium size
MSZ 6025-1.lap-1958 Template temperature measurement equipment. Independently connected devices. Two-tail internal flow

German Institute for Standardization

DIN 18134:2001 Soil; Testing procedures and testing equipment - Plate load test
DIN 18134 E:1995-08 Soil; Testing procedures and testing equipment - Plate load test
DIN 18134:2012 Soil - Testing procedures and testing equipment - Plate load test
DIN 18134:1993 Soil; Testing procedures and testing equipment - Plate load test
DIN IEC 60605-3-4:1993 Equipment reliability testing; preferred test conditions; equipment for portable and non-stationary use; low degree of simulation; identical with IEC 60605-3-4:1992
DIN 51231-1:1972 Material testing machines - Testing equipment for structural components - Part 1: Floor slabs
DIN 51231-1:2001-12 Material testing machines - Testing equipment for structural components - Part 1: Floor slabs
DIN 18134 E:2010-04 Draft Document - Soil - testing procedures and testing equipment - Plate load test
DIN 58921:2011-01 Test method to demonstrate the suitability of a medical device simulator during steam sterilisation - Medical device simulator testing; Text in German and English
DIN 51231-1:2001 Material testing machines - Testing equipment for structural components - Part 1: Floor slabs
DIN 50049 Beiblatt 1:1980 Material test document sample inspection certificate template
DIN 18216:1986 Formwork ties; requirements, testing, use
DIN 53142-1:2004 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 53142-1 E:2014-09 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN IEC 60605-3-1:1988 Electrical engineering; equipment reliability testing; preferred test conditions; indoor portable equipment; low degree of simulation; identical with IEC 60605-3-1:1986
DIN EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) (IEC 61189-3:2007); German version EN 61189-3:2008
DIN 53142-1:2014 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 65071-2:1992 Aerospace; fibre reinforced moulding materials; preparation of test panels of plain reinforcing fibre products
DIN EN 12576:1998-09 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC; German version EN 12576:1998
DIN EN 14619:2005 Roller sports equipment - Kick scooters - Safety requirements and test methods; German version EN 14619:2004
DIN EN 12576:1998 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC; German version EN 12576:1998
DIN EN 957-5:1996 Stationary training equipment - Additional specific safety requirements and test methods for pedal crank training equipment
DIN 55437-1:1992 Testing of board; testing of creasings; laboratory producing of test creasings
DIN EN 61180-2:1995 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment (IEC 61180-2:1994); German version EN 61180-2:1994
DIN ISO 13820 E:2023 Draft Document - Paper, board and corrugated fibreboard - Description and calibration of fixed platen compression-testing equipment (ISO 13820:2021); Text in German and English
DIN EN 61180 E:2013-07 Draft Document - High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
DIN EN 61629-2:1998 Aramid pressboard for electrical purposes - Part 2: Methods of test (IEC 61629-2:1996); German version EN 61629-2:1996

Gosstandart of Russia

GOST R 52752-2007 Formworks. Test methods
GOST R ISO 20242-4-2012 Industrial automation systems and integration. Service interface for testing applications. Part 4. Device capability profile template
GOST R 53189-2008 Environmental dynamic test metods for machines, instruments and other technical articles. Mixed mode vibration tests
GOST R 55994-2014 Fire resistance tests. Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation

Ente Nazionale Italiano di Unificazione

UNI 10467-3:1995 Raised access floors. Test methods. Load tests on the floor unit.
UNI 6010:1967 Mould, mould cover and pad for the making of rammed mortar specimens for compression tests.
UNI 11763-2:2024 Temporary works equipment - Formworks - Part 2: Horizontal formworks - General requirements for design, construction and use
UNI 11763-1:2019 Temporary works equipment - Formworks - Part 1: Vertical formworks - General requirements for design, construction and use
UNI EN 13451-6:2003 Swimming pool equipment - Additional specific safety requirements and test methods for turning boards
UNI 6771:1970 Foundry tools. Metallic matchplates with triangle references.

Underwriters Laboratories (UL)

UL 1437-1998 Electrical analog instruments, panel board types
UL 1437-1993 Electrical analog instruments, panel board types

SE-SIS

SIS SS 27 11 16-1979 Corrugated metal sheets — Water tightness test of fixings
SIS SS 03 43 11-1986 Office machines and data processing equipment - Tabulating template

Standards Norway

NS 3251:1975 Test methods for rigid flat sheets - Apparatus and general testing conditions
NS-EN 12576:1998 Plastics — Fibre reinforced composites — Preparation of compression moulded test plates of SMC, BMC and DMC

Korean Agency for Technology and Standards (KATS)

KS A IEC 60605-3-1-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS A IEC 60605-3-1-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS A IEC 60605-3-5-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions －Section 5：Test cycle 5：Ground mobile equipment－Low degree of simulation
KS A IEC 60605-3-6-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS A IEC 60605-3-6-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS A IEC 60605-3-5-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions －Section 5：Test cycle 5：Ground mobile equipment－Low degree of simulation
KS V 0940-2019 Performance test procedure for deck equipments of vessel intended for cold climate region
KS A IEC 60605-3-2-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Equipment for stationary use in weatherprotected location－High degree of simulation
KS A IEC 60605-3-1:2002 Equipment reliability testing－Part 3：Preferred test conditions－Indoor portable equipment－Law degree of simulation
KS A IEC 60605-3-2-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Equipment for stationary use in weatherprotected location－High degree of simulation
KS A IEC 60605-3-4-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions－Section 4：Test cycle 4：Equipment for portable and non－stationary use－Low degree of simulation
KS V 0940-2014(2019) Performance test procedure for deck equipments of vessel intended for cold climate region
KS A IEC 60605-3-4-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions－Section 4：Test cycle 4：Equipment for portable and non－stationary use－Low degree of simulation
KS M ISO 1268-9:2012 Fibre-reinforced plastics－Methods of producing test plates－Part 9：Moulding of GMT/STC
KS V 0940-2014(2024) Performance test procedure for deck equipments of vessel intended for cold climate region
KS V 0940-2024 Performance test procedure for deck equipments of vessel intended for cold climate region
KS V 0940-2014 Performance test procedure for deck equipments of vessel intended for cold climate region
KS A IEC 60605-3-3-2002(2017) Equipment reliability testing－Part 3：Preferred test conditions Section 3：Test cycle 3：Equipment for stationary use in partially weatherprotected locations－Low degree of simulation
KS C IEC 61180-2:2006 High-voltage test techniques for low-voltage equipment－Part 2：Test equipment
KS C IEC 61180-2-2019 High-voltage test techniques for low-voltage equipment — Part 2：Test equipment
KS A IEC 60605-3-3-2002(2022) Equipment reliability testing－Part 3：Preferred test conditions Section 3：Test cycle 3：Equipment for stationary use in partially weatherprotected locations－Low degree of simulation
KS A IEC 60605-3-6:2002 Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation
KS R 1119-2004 Braking device dynamometer test procedure-Truck and bus
KS W 0926-2014 Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment
KS C 8111-2008 Testing methods for wiring devices
KS A IEC 60605-3-5:2002 Equipment reliability testing－Part 3：Preferred test conditions －Section 5：Test cycle 5：Ground mobile equipment－Low degree of simulation

American Society for Testing and Materials (ASTM)

ASTM F1062-97(2013) Standard Test Method for Verification of Ski Binding Test Devices
ASTM D5940-96 Experimental practice in preparing small specimens of thermoplastic materials by injection molding
ASTM F1061-08(2013) Standard Specification for Ski Binding Test Devices
ASTM D3010-87 Practice for Preparing Compression-Molded Test Sample Plaques of Rigid Poly(Vinyl Chloride) Compounds
ASTM G179-04 Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
ASTM C120-05 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
ASTM F1820-13 Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices
ASTM F155-65 Method of Test for for Temper of Strip and Sheet Metals for Electronic Devices (Spring-Back Method
ASTM D2394-05 Standard Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D3044-94(2000) Standard Test Method for Shear Modulus of Wood-Based Structural Panels
ASTM F1820-97 Standard Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device
ASTM D3044-94(2011) Standard Test Method for Shear Modulus of Wood-Based Structural Panels
ASTM F1820-97(2009) Standard Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device
ASTM C120-00 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
ASTM E1837-96(2002) Standard Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated Use Test)
ASTM E1837-96(2007) Standard Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated Use Test)
ASTM D3044-94 Standard Test Method for Shear Modulus of Wood-Based Structural Panels

Association of German Mechanical Engineers

VDI/VDE/DGQ 2618 Blatt 6.2-2013 Pruefmittelueberwachung - Pruefanweisung fuer Pruefplatten
VDI VDE DGQ 2618 Blatt 6-2-2014 Measuring and testing equipment inspection instructions for control panels
VDI/VDE/DGQ 2618 Blatt 19.1-2013 Inspection of measuring and test equipment - Test instruction for special gauges and test equipment
VDI/VDE/DGQ 2618 Blatt 6.2-2014 Inspection of measuring and test equipment - Test instructions for surface plates
VDI/VDE/DGQ 2618 BLATT 6.2:2014 Test equipment monitoring — test instructions for test plates
VDI VDE DGQ 2618 Blatt 19-1-2014 Inspection of measuring and test equipment – Test instruction for special gauges and test equipment
VDI 2776 BLATT 2-2024 Process engineering plants - Modular plants - Design of modular plants
VDI/VDE/DGQ 2618 Blatt 19.1-2014 Inspection of measuring and test equipment - Test instruction for special gauges and test equipment
VDI 2776 BLATT 3-2024 Process engineering plants - Modular plants - Safety of modular plants

International Electrotechnical Commission (IEC)

IEC 60605-3-5:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation
IEC 60605-3-6:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 6: Test cycle 6: Outdoor transportable equipment - Low degree of simulation
IEC 60605-3-5:1996/COR1:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation
IEC 60605-3-1:1986 Equipment reliability testing. Part 3 : Preferred test conditions. Indoor portable equipment - Low degree of simulation
IEC 60605-3-4:1992 Equipment reliability testing; part 3: preferred test conditions; section 4: test cycle 4: equipment for portable and non-stationary use; low degree of simulation
IEC 62343-2-1:2023 Dynamic modules - Part 2-1: Reliability qualification - Test template
IEC 62343-2-1:2019 Dynamic modules - Part 2-1: Reliability qualification - Test template
IEC 60605-3-3:1992 Equipment reliability testing; part 3: preferred test conditions; section 3: test cycle 3: equipment for stationary use in partially weatherprotected locations; low degree of simulation
IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
IEC 60605-3-2:1986 Equipment reliability testing. Part 3 : Preferred test conditions. Equipment for stationary use in weatherprotected locations - High degree of simulation
IEC TS 63106-2:2022 Simulators used for testing of photovoltaic power conversion equipment - Recommendations - Part 2: DC power simulators
IEC TS 63106-1:2020 Simulators used for testing of photovoltaic power conversion equipment - Recommendations - Part 1: AC power simulators

British Standards Institution (BSI)

BS 5985:1980 Specification for a template for services to dental unit bases or floor boxes
BS ISO 1268-9:2003 Fibre-reinforced plastics - Methods of producing test plates - Moulding of GMT/STC
BS ISO 1268-3:2000 Fibre-reinforced plastics - Methods of producing test plates - Wet compression moulding
BS ISO 1268-3:2001 Fibre-reinforced plastics - Methods of producing test plates - Wet compression moulding
BS EN 61180-2:1995 High-voltage test techniques for low-voltage equipment - Test equipment
BS ISO/TR 9122-4:1993 Toxicity testing of fire effluents-The fire model (furnaces and combustion apparatus used in small-scale testing)
BS EN 13613:2009 Roller sports equipment - Skateboards - Safety requirements and tests methods
BS PD IEC/TR 62271-308:2002 High-voltage switchgear and controlgear-Guide for asymmetrical short-circuit breaking test duty T100a
BS EN 13613:2010 Roller sports equipment. Skateboards. Safety requirements and tests methods
BS ISO 13820:2014 Paper, board and corrugated fibreboard. Description and calibration of compression-testing equipment
BS 601-5:1973 Specification for steel sheet and strip for magnetic circuits of electrical apparatus-Methods of test
BS EN 13613:2001 Roller sports equipment - Skateboards - Safety requirements and test methods
BS EN 13451-6:2001 Swimming pool equipment - Additional specific safety requirements and test methods for turning boards
BS EN 14619:2005 Roller sports equipment - Kick scooters - Safety requirements and test methods
BS ISO 1268-2:2001 Fibre-reinforced plastics - Methods of producing test plates - Contact and spray-up moulding
BS EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations — Test 16r: Deflection of contacts, simulation
BS EN 13451-10:2014 Swimming pool equipment. Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
BS EN 61180:2016 High-voltage test techniques for low-voltage equipment. Definitions, test and procedure requirements, test equipment
BS EN 14619:2015 Roller sports equipment. Kick scooters. Safety requirements and test methods
BS 5760-13.6:1997 Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment-Outdoor transportable equipment. Low degree of simulation
BS ISO 16900-5:2016+A1:2018 Respiratory protective devices — Methods of test and test equipment Part 5 : Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools
BS EN 12576:1998 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC

PL-PKN

PN M77650-1990 Household equipment Stainless steel sheet vessels Specifications and tests

GCC Standardization Organization

GSO OIML R118:2007 Testing procedures and Test Report Format For Pattern evaluation of Fuel Dispensers For Motor Vehicles
GSO ISO 16900-5:2021 Respiratory protective devices — Methods of test and test equipment — Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools

Spanish Association for Standardization (UNE)

UNE-ISO 13820:2008 Paper, board and corrugated fibreboard -- Description and calibration of compression-testing equipment
AENOR UNE 180201:2016 Formwork. General design, performance requirements and verifications.
UNE 180201:2022 Formwork. General Design, performance requirements and verifications
UNE 56 708 Preparation of test tubes for particleboard testing
UNE 56-734-1988 Test tube preparation before hardboard testing

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4266.19:2004 Reconstituted wood-based panels - Methods of test - Assessing appearance of melamine overlaid panels

RO-ASRO

STAS SR 13427-1999 Agricultural machines Mouldboard ploughs Test methods

Standard Association of Australia （SAA）

AS 4362.2:1996(R2015) Low voltage equipment High voltage testing technology testing equipment
AS CA70:1971 Design and construction of formwork (known as the SAA Formwork Code)

International Organization for Standardization (ISO)

ISO 13820:2021 Paper, board and corrugated fibreboard — Description and calibration of fixed platen compression-testing equipment
ISO 13820:1996 Paper, board and corrugated fibreboard - Description and calibration of compression-testing equipment
ISO 1268-9:2003 Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of GMT/STC
ISO 13820:2014 Paper, board and corrugated fibreboard - Description and calibration of compression-testing equipment
ISO 1268-7:2001 Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding

CEN - European Committee for Standardization

EN 13613:2009 Roller sports equipment - Skateboards - Safety requirements and tests methods

Association Francaise de Normalisation

NF S52-333*NF EN 13613:2009 Roller sports equipment - Skateboards - Safety requirements and tests methods
NF F70-015:1992 Railway fixed equipment. Equipment assign for connecting plates-supports and cases of modulars equipment. Engineering and designing rules.
NF P93-350:1995 Building site equipment. Wallforms for concrete.
NF F48-111:1992 Railway fixed equipement. Modular power supply units for signalling equipement, telecommunication equipment and computer equipement. Low voltage switch board equipement.
NF S52-742:1997 Winter-sports equipment. Test devices for the setting of the functional unit ski/boot/binding. Requirements and tests.
NF F70-021:1997 Railway fixed equipment. Modulated switchgear enclosures. Classification, definition of test and approval procedures.
NF C41-107:1995 High-voltage test techniques for low-voltage equipment. Part 2 : test equipment.
NF S52-405:2005 Rollers sports equipment - Kick scooters - Safety requirements and test methods.
NF F48-211:1992 Railway fixed equipment. Modular power supply units for signalling equipment, telecommunication equipment and computer equipment. Low voltage switch board system.
NF T57-156*NF EN 12576:1998 Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC.
NF R16-332-2*NF ISO 7440-2:1993 Road vehicles. Fuel injection equipment testing. Part 2 : orifice plate flow-measurement.
NF T57-153-11*NF ISO 1268-11:2006 Fibre-reinforced plastics - Methods of producing test plates - Part 11 : injection moulding of BMC and other long-fibre moulding compounds - Small plates.

European Committee for Standardization (CEN)

EN 13613:2001 Roller Sports Equipment - Skateboards - Safety Requirements and Test Methods

Danish Standards Foundation

DS/EN 12576:1999 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC og DMC
DANSK DS/EN 61180-2:2012 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment

Swedish Institute for Standards

SS-EN 12576:1998 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMCand DMC
SS-EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
SS-EN 1751:2024 Ventilation for buildings — Air terminal devices — Aerodynamic testing of damper and valves
SS-EN 61300-2-50:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode
ISO 2678 Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment

(U.S.) Ford Automotive Standards

FORD FLTM BI 123-01-2005 PAINTED SHEET METAL CORROSION TEST (LABORATORY-SIMULATED ARIZONA PROVING GROUND TEST)
FORD FLTM BI 003-07-2001 PREPARATION OF CAST IRON PANELS FOR PAINT TEST

CZ-CSN

CSN IEC 605-3-4:1994 Equipment reliability testing.Part 3-4:Preferred test conditions for equipment reliability testing.Equipment for portable and non-stationary use-Low degree of simulation

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 61180-2:2014 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment

The Society for Protective Coatings (SSPC)

SSPC PA 12-1997(2012) Preparation of Uncontaminated Rusted Steel Test Panels

Society of Automotive Engineers (SAE)

SAE AMS3217A-1993 Standard Elastomer Stocks Test Slabs
SAE ARINC438-2010 GUIDANCE FOR ACCEPTANCE OF FLIGHT SIMULATION TRAINING DEVICES
SAE AIR5320-1999 Summary of Icing Simulation Test Facilities
SAE AIR5320A-2015 Summary of Icing Simulation Test Facilities
SAE ARP1398A-2000 Testing of Oxygen Equipment

Bureau of Indian Standards

IS 2106-17-1973 Environmental tests for electronic and electrical equipment-17 - Stimulated solar radiation at ground level
IS 16826-2018 High - Voltage Test Techniques For Low-Voltage Equipment - Definitions, Test and Procedure Requirements, Test Equipment

IPC - Association Connecting Electronics Industries

IPC 7525B-2011 Stencil Design Guidelines
IPC 7525-2000 Stencil Design Guidelines
IPC 7525B RUSSIAN-2011 Stencil Design Guidelines
IPC 7525B CD-2011 Stencil Design Guidelines
IPC 7525B CHINESE-2011 Stencil Design Guidelines
IPC 7525A CD-2007 Stencil Design Guidelines
IPC 7525B CHINESE CD-2011 Stencil Design Guidelines

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0432-10-2013 High-voltage test techniques for low-voltage equipment - Definitions@ test and procedure requirements@ test equipment

Aeronautical Radio Inc.

ARINC 438-2013 GUIDANCE FOR ACCEPTANCE OF FLIGHT SIMULATION TRAINING DEVICES

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC 7525C CHINESE-2021 BUILD ELECTRONICS BETTER - TEMPLATE DESIGN GUIDE

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 61180-2:2016 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
BH GSO ISO 16900-5:2022 Respiratory protective devices — Methods of test and test equipment — Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools

Comitato Elettrotecnico Italiano

CEI EN 61180-2:1997 High-voltage test techiniques for low-voltage equipment - Part 2: Test equipment

Japanese Industrial Standards Committee (JISC)

JIS K 7016-7:2009 Fibre-reinforced plastics -- Methods of producing test plates -- Part 7: Resin transfer moulding

AT-ON

ONORM M 1339-1999 Control of measuring and test equipment - Applicability test of measuring and test equipment

European Association of Aerospace Industries

AECMA PREN 3110-1989 Aerospace Series Sealants Method of Manufacture of Moulded Plates

United States Navy

NAVY UFGS-26 08 00-2008 APPARATUS INSPECTION AND TESTING

YU-JUS

JUS U.B1.047-1997 Testine ofsoil - Determination of deformation modulus bv circular plate load test

Others: Test equipment standard,Equipment function test,Equipment function test,Test equipment,Constant temperature test equipment,Attached equipment test,High pressure test equipment,Environmental test equipment,Auxiliary Equipment Test,Equipment Test Report Template,Clinical Trial Equipment,Table test equipment,High voltage equipment test,Test Equipment Template,Device template,Environmental test equipment,Equipment Test Report Template,Device Report Template,Equipment Certification Template