heating furnace

heating furnace, Total:85 items.

The international standard classification for "heating furnace" includes: Boilers and heat exchangers , Refractories , Energy and heat transfer engineering in general , Burners. Boilers , Equipment for the metallurgical industry , Steels , Flat steel products and semi-products , Extraction and processing of petroleum and natural gas , Equipment for petroleum and natural gas industries , Fuels , Processing equipment , Production of metals .

The Chinese standard classification for "heating furnace" includes: Boiler and its auxiliary equipment , Argillaceous and high alumina fire resistance , Unshaped refractory , Other building material equipment , Technical management , Basic standards and general methods , Basic standards and general method , Other power equipment , Steel and iron products in general , Steel sheet and strip , Technical management , Petroleum exploration, development, gathering and transportation equipment in general , Hygiene, safety and labor protection , Mechanical equipment installation engineering , Metallurgical machinery in general , Petrochemical and chemical industry engineering , Metallurgical industry engineering , Rolling equipment , Heat treatment equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 21435-2008 Phase change heater
GB/T 33840-2025 General technical requirements for water jacket furnaces
GB/T 17719-2009 Calculation method and utilization guides for waste heat resource’s quantity of industrial boiler’s and flame heating furnace’s exhaust gas
GB/T 33956-2017 Methods of determination and calculation of heat balance in continuous reheating furnace for steel rolling
GB/T 15319-1994 Monitoring and testing method for energy saving of flame heating furnace
GB/T 29728-2013 Energy consumption grades of furnace for CGL
GB/T 31344-2014 Technical requirements of measurement and verification of energy savings-Slab reheating furnace system
GB 24848-2010 Minimum allowable values of energy efficiency and energy efficiency grades for heater of petroleum industry
GB/T 33840-2017 General technical requirement for water jacket furnace
GB 38449-2019 Minimum allowable values of energy efficiency and energy efficiency grade of regenerative rolling reheating furnace
GB/T 32972-2016 Technical specification energy saving design for reheating furnace of steel rolling in iron and steel works
GB/T 17719-1999 Calculating method and utilization guides for waste heat resources quantity of industrial boilers and flame heating furnaces waste gas
GB/T 22590-2021 Refractory castables for rolling mill reheating furnace
GB/T 32489-2016 Technical requirement of energy-saving operation for reheating furnace in steel rolling
GB/T 22590-2008 Refractory castables for reheating furnaces

Professional Standard - Ferrous Metallurgy

YB 4062-1991 Specification for claw of chained heating furnace
YB/T 071-1995 Specification for annular furnace bottom machinery
YB/T 018-1992 Specification for walking beam heating furnace
YB 4063-1991 Specification for hot slideway of heating furnace
YB/T 4242-2011 Technical specification energy saving design for reheating furnace of steel rolling in iron and steel works
YB 4409-2014 Code for quality inspection and acceptance of annular heating furnace brick-lining
YB/T 4439-2014 High alumina anchor bricks for beating furnace
YB/T 4466-2014 Technical specification of energy-saving operation for reheating furnace in steel rolling
YB/T 071-2024 Ring furnace bottom mechanical technical conditions
YB/T 4259-2012 Operation specification of reheating furnace for CGL

Professional Standard - Petroleum

SY/T 5262-2016 Specification for torch type heating furnace
SY/T 5262-2000 Specification for fire tube type heater
SY/T 0524-2024 Thermal Oil Heater System Specification
SY 0031-2004 Safety Regulations for Heaters Used in Petroleum Industry
SY/T 0538-2021 Standard for tubular heater
SY/T 6381-2016 Heat determination for heating furnace of petroleum industry
SY/T 0540-1994 Types and basic parameters of heating furnaces in petroleum industry
SY 0538-2012 Specification for Tube Heated Furnaces
SY/T 0540-2013 Type and Basal Parameters for Heater Used in Petroleum Industry
SY/T 0538-2012 Specification for tubular heater
SY/T 5262-2009 Specification for Fire Tube Type Heater
SY/T 0538-2004 Code for tubular heater
SY 0031-1995 Safety code for heaters used in petroleum industry
SY/T 6381-1998 Heat for heating furnace
SY/T 0404-1998 Heating furnace construction and acceptance specification
SY/T 0540-2006 Type and basal parameters of heaters used in petroleum industry
SY/T 0524-2008 Code for heater system with heat-transfer oil
SY 0031-2012 Safety regulations for heaters used in petroleum industry
SY/T 6381-2008 Heat determination for heating furnace
SY/T 5261-1991 Method for calculation of strength of pressure components of fire-tube heating furnace
SY/T 0539-1994 Sectional specification for boned permanent ferrite magnets for seal
SY/T 0538-1994 Technical conditions of tubular heating furnace

Professional Standard - Energy

SY/T 6381-2024 Heat determination for heating furnace of the petroleum industry

Professional Standard - Machinery

JB/T 5706-1991 Resistance Heating Furnace for Softening and Annealing of Copper Products. Grading of Energy Consumption
JB/T 2628-2010 The basic data for rack pusher of furnace in rolling mill
JB/T 2628-1999 The basic data for rack pusher of furnace in rolling mill
JB/T 5711-1991 Heating Furnace for Thermoforming of Steel Plates. Grading of Energy Consumption
JB/T 5710-1991 Heating furnace for repair welding of iron casting. Grading of energy consumption
JB/T 50153-1999 Heating furnaces for forging. Grading of energy consumption (only for internal use)
JB/T 7688.11-1995 Technical conditions of metallurgical cranes Heating furnace loading and unloading cranes
JB/T 5636-1991 Optical glass softening & heating oven. Grading of energy consumption
JB/T 5705-1991 Resistance Heating Furnace for Softening and Annealing of Aluminum Products. Grading of Energy Consumption
JB/T 5695-1991 Heating Furnace for Bars. Grading of Energy Consumption

Professional Standard - Petrochemical Industry

SH/T 3128-2002 Ceramic fibre linings of fired heaters for general refinery service
SH/T 3036-2003 Fired heaters for general refinery service
SH/T 3037-2002 Calculation of heater-tube thickness in petroleum refineries
SHJ 1039-1984 Refinery tubular heating furnace tube expansion engineering technical conditions
SH/T 3036-2012 Fired heaters for general refinery service
SHJ 1044-1984 Technical condition for tube heating furnace brick works of oil refinery

Shanxi Provincial Standard of the People's Republic of China

DB1409/T 32-2022 Guidelines for energy-saving monitoring of natural gas heating furnaces for forging

Ministry of Housing and Urban-Rural Development of the People's Replublic of China

GB 50825-2013 Code for quality acceptance of reheating furnaces in iron and steel works

Hubei Provincial Standard of the People's Republic of China

DB42/T 2049-2023 Energy efficiency grades and test rules for rolling continuous heating furnaces

Shandong Provincial Standard of the People's Republic of China

DB37/T 4359-2021 The safty technical requirements for gas combustion system ofthe heating furnace in the rolling plate mill

Taiwan Provincial Standard of the People's Republic of China

CNS 13639-1996 Steel Tubes for Fired Heaters

Professional Standard - Non-ferrous Metal

YS/T 121.4-1992 Nonferrous metals processing enterprises flame heating furnace and annealing furnace heat balance test and calculation method

Professional Standard - Electron

SJ/T 31423-1994 Requirements of Readiness and Methods of Inspection and Assessment for Vacuum Resistance-heated Furnaces

Underwriters Laboratories (UL)

UL 391-1991 Solid-fuel and combination-fuel central and supplementary furnaces
UL 391-1995 Solid-fuel and combination-fuel central and supplementary furnaces
UL 391-2019 Solid-fuel and combination-fuel central and supplementary furnaces
UL 727-2006 UL Standard for Safety Oil-Fired Central Furnaces Ninth Edition

Korean Agency for Technology and Standards (KATS)

KS D 3587-1986 STEEL TUBES FOR FIRED HEATER
KS D 3587-1991(2011) STEEL TUBES FOR FIRED HEATER

Japanese Industrial Standards Committee (JISC)

JIS G 3467:1988 Steel tubes for fired heater
JIS G 3467:2006 Steel tubes for fired heater
JIS G 3467:2013 Steel tubes for fired heater

Canadian Standards Association (CSA)

CSA B140.4-2004(R2019) Oil furnace temperature air heating furnace
CSA 2.3B-2008-2008 Gas-Fired Central Furnaces
CSA/AM ANSI Z21.47-2016/CSA 2.3-2016 Gas-fired central furnaces

Danish Standards Foundation

DANSK DS/EN 15034:2006 Heating boilers – Condensing heating boilers for fuel oil

CZ-CSN

CSN ON 06 4410-1962 Heating fuel furnace