Ball Pressure Tester

Ball Pressure Tester, Total:351 items.

The international standard classification for "Ball Pressure Tester" includes: Globe valves , Electrical wires and cables , Environmental testing , Plastics , Geology. Meteorology. Hydrology , Sports equipment and facilities , Sports equipment and facilities in general , Advanced ceramics , Mechanical testing , Electrical and electronic testing , Adhesives , Measurement of electrical and magnetic quantities , Glass products , Electrical engineering in general , Textile fabrics , Laboratory ware and related apparatus , Optical equipment , Substations. Surge arresters , Other textile machinery , Textile machinery , Looms. Weaving machines , Electricity. Magnetism. Electrical and magnetic measurements , Nuclear energy engineering .

The Chinese standard classification for "Ball Pressure Tester" includes: Paper manufacturing machinery in general , Valve , Wire with insulation layer , Basic standards and general methods , Material composition analysis instrument and environment detection instrument in general , Basic standards and general methods for synthetic resin and plastic , Engineering investigation and geotechnical engineering in general , Sports goods , Hydrology and water conservancy instrument , Special ceramics , Physics and Mechanics , Electric transmission and transformation equipment in general , Basic standards and general methods for adhesives , Electrical instrument and meter in general , Laboratory glass, ceramic and plastic vessel , Basic standards and general methods , Basic standards and general methods , Optical instrument in general , Papermaking in general , Nonmetal material testing machine , Textile testing instrument , Textile machinery and apparatus in general , Knitting machinery and apparatus , Special instruments for teaching , Office supplies and office implements , Length Measurement , Electromagnetic Measurement , Mechanics Measurement , Navigation equipment , Environmental Condition and General Test Method , Petroleum exploration logging equipment and instrument , Other electronic instrument and equipment .

Group Standards of the People's Republic of China

T/ZZB 0659-2018 Martindale abrasion and pilling tester
T/ZZB 1357-2019 Textile waterproof performance tester — Hydrostatic pressure method
T/HBJLXH 006-2023 Ball pressure tester calibration method

Professional Standard - Light Industry

QB 1048-1991 Compression Strength Tester
QB/T 2386-1998 Short Span Compressive Strength Tester for Paper and Board

Professional Standard - Machinery

JB/T 4279.12-2008 Verification procedure for test equipment of enamelled winding wire Part12:Continuity of insulation tester(low voltage method)
JB/T 4279.13-1994 Enamelled winding wire test equipment and equipment verification method High-voltage paint film continuity tester
JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
JB/T 8861-2004 Ball valve-potential pressure
JB/T 6214-2014 Guide to the Reliability Compliance Test and Determination Test(Exponential Distribution)of Instrumentation
JB/T 7083-1993 Impulse Voltage Testing Instruments for Low Voltage Apparatus
JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
JB/T 9395-2017 Four-ball friction testing machines
JB/T 11504-2013 Digital Readout for Spherical Inductive Linear Transducer
JB/T 8861-1999 Ball valve static pressure life test regulations
JB/T 4279.11-2008 Verification procedure for test equipment of enamelled winding wire Part11:Breakdown voltage tester
JB/T 7080-1993 Testing instrument for winding inter-turn impulse voltage
JB/T 7080-2013 Impulse Voltage Tester for Winding Interturn Insulation
JB/T 7083-2013 Impulse-voltage tester for low-voltage electrical installations
JB/T 4279.13-2008 Verification procedure for test equipment of enamelled winding wire Part13:Continuity of insulation tester(high-voltage method)
JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
JB/T 4279.12-1994 Enamelled winding wire test equipment and equipment verification method Low-voltage paint film continuity tester
JB/T 7440-1994 Die-casting technique parameter tester
JB/T 6214-1992 Guideline for Reliability Validation Test and Determination Test (Exponential Distribution) for Instrumentation

工业和信息化部/国家能源局

JB/T 8861-2017 Ball valve-Potential pressure life test regulation

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12085.8-1989 Optics and optical instruments--Environmental test methods--High pressure, low pressure, immersion
GB/T 25898-2010 Instrumented nanoindentation test-Indentation hardness and modulus of thin film
GB/T 16896.1-1997 Digital recorders for measurements in high-voltage impulse tests. Part 1: Requirements for digital recorders
GB/T 14625.3-2008 Test methods for basketball football volleyball and handball - Part 3: The determination of resistance to shock
GB/T 14149-1993 glassware - Interchangeable spherial ground joints
GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film
GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments
GB/T 5169.21-2006 Fire hazard testing for electric and eletronic products - Part 21: Abnormal heat - Ball pressure test
GB/T 21190-2007 Paper board and corrugated fibreboard—Description and calibration of compression-testing equipment
GB/T 22541-2008 Instrument for soil test - Compaction apparatus
GB/T 3398-1982 Test for hardness of plastics by the ball indentation
GB/T 14625.4-1995 Testing conditions and samples preparation for basketball, football, volleyball and handball
GB/T 12085.18-2011 Optics and optical instruments—Environmental test methods—Part 18:Combined damp heat and low internal pressure
GB/T 21043-2007 Instrument for soil test—Strain-controlled unconfined compression apparatus
GB/T 5169.21-2017 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test method
GB/T 22876-2008 Paper，board and corrugated fiberboard - Description and calibration of compression testing equipment
GB/T 12085.8-2010 Optics and optical instruments—Environmental test methods—Part 8:High pressure low pressure immersion
GB/T 14625.4-2008 Test methods for basketball,football,volleyball and handball—Part 4:Test conditions and sample preparation
GB/T 11606.10-1989 The method of environmental test for analytical instruments--Low air pressure test
GB/T 12085.5-2010 Optics and optical instruments—Environmental test methods—Part 5:Combined cold low air pressure
GB/T 4802.3-1997 Textiles-Assessing the rate of pilling of fabrics-Pilling box method
GB/T 22458-2008 General rules of instrumented nanoindentation test
GB/T 31228-2014 Instrumented nanoindentation test. Terminology
GB/T 15725.4-1995 Laboratory glassware - Flask(multiple neck)
GB/T 311.6-1983 High voltage test techniques; Part 5:Sphere-gaps for voltage measurement
GB/T 12746-2007 Geotechnical engineering instrument for test—Penetration test apparatus
GB/T 14625.1-2008 Test methods for basketball, football, volleyball and handball - Part 1: Measurement of roundness
GB/T 42665-2023 Test method for spherical indentation strength of porous ceramics全国工业陶瓷标准化技术委员会(SAC/TC 194)
GB/T 4852-2002 Test method for tack of pressure sensitive adhesive tapes by rolling ball
GB/T 11606.2-1989 The method of environmental test for analytical instruments--Line frequency and voltage test
GB/T 32192-2015 Withstanding voltage tester
GB/T 4935.2-2009 Instrument for soil test—Oedometer—Part 2:Pneumatic oedometer
GB/T 14625.3-1993 Basketball, football, volleyball, handball. The determination of resistance to shock
GB/T 12745-2007 Geotechnical engineering instrument for test—Cone static or dynamic penetrometer
GB/T 9357-2008 Instrument for soil test - Permeameter

Professional Standard - Textile

FZ/T 98021-2019 Textile waterproof performance tester—Hydrostatic pressure method
FZ/T 98014-2016 Martindale abrasion and pilling tester
FZ/T 98019-2018 Rolling box pilling tester
FZ/T 90079.1-1995 Test methods of butyronitrile picker for cotton machine - sphere indentation hardness
FZ/T 90078.1-1995 Test methods of butyronitrile buffer ring for cotton machine - sphere indentation hardness
FZ/T 90080.1-1995 Test methods of plastic picker for textile - sphere indentation hardness
FZ/T 98022-2021 Circular locus pilling tester

Professional Standard - Education

JY 211-1986 Technical conditions of celestial globe
JY 58-1980 Technical specifications for globe (trial)
JY 137-1982 Air-compression Fire-catching Instrument
JY/T 0562-2015 Eyeball
JY/T 0420-2010 Experimental apparatus for the internal pressure of liquid
JY 0003-1990 The transparent celestial globe

Anhui Provincial Standard of the People's Republic of China

DB3411/T 0021-2023 Standards for laboratory management of electric bicycle charger manufacturers

工业和信息化部

QB/T 2386-2017 Short span compression tester for paper and board

National Metrological Verification Regulations of the People's Republic of China

JJG 465-1986 Spherometer Special -Gauge
JJG 125-2015 Paint Abrasion Tester
JJG 401-1985 Spherometer
JJG(交通) 125-2015 Abrasion tester for paint films
JJG 795-2004 Verification Regulation of Withstanding Voltage Testers
JJG 795-2016 Withstanding Voltage Testers
JJG 023-2020 Asphalt Ductility Tester
JJG 946-1999 Verification Regulation of Pressure Tide Gauge
JJG 151-2020 Falling Ball Resilience Modulus Tester

Professional Standard - Electricity

DL/T 1681-2016 High voltage test equipment matching guidelines
DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester

Professional Standard-Ships

CB* 645-1988 Star Globe
CB 645-1988 Planetarium

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41485-2022 Nuclear instrumentation—Geophysical borehole instrumentation to determine rock density
GB/T 32065.15-2019 Environmental test methods for oceanographic instruments-Part 15:Hydrostatic pressure test

National Metrological Technical Specifications of the People's Republic of China

JJF(石化)034-2020 Calibration Specification for Softening Point Testers(Ring and ball Method)for Petrochemical Products
JJF(石化) 034-2020 Calibration specification for softening point tester (ring and ball method) of petrochemical products
JJF 1978-2022 Calibration Specification for Ball-bar Indicators
JJF 1831-2020 Calibration Specification for Spherometers
JJF 1691-2018 Calibration Specification for Impulse Voltage Testers for Winding Interturn Insulation

Professional Standard - Ocean

HY 016.15-1992 The basic method of environmental test for oceanographic instruments—Hydrostatic pressure test
HY 21.11-1992 The basic method of environmental test for oceanographic instruments - Guideline for hydrostatic pressure test

Taiwan Provincial Standard of the People's Republic of China

CNS 15141-2007 Textiles - Determination of fabric propensity to surface fuzzing and to pilling : Pilling box method
CNS 13986-1997 Method of test for wear resistance of fine ceramics by ball on disk method

Hubei Provincial Standard of the People's Republic of China

DB42/T 397-2006 Verification Criterion of Meter for Testing voltage drop of voltage transformer secondary cicuit

Professional Standard - Petroleum

SY/T 5102-1993 Basic Environment Test of Instrument for Petroleum Exploration and Development - Test K: HTHP Test

Professional Standard - Geology

DZ 0039.11-1992 Condition and method for basic environment test of geological instrument product - high temperature / high-voltage comprehensive test
DZ 0039.9-1992 Condition and method for basic environment test of geological instrument product - pressure test
DZ 0039.10-1992 Condition and method for basic environment test of geological instrument product - low air pressure test
DZ 28.9-1984 Basic Environmental Test Conditions and Methods for Geological Instrument Products Low Pressure Test
DZ 28.8-1984 Basic environmental test conditions and methods for geological instrument products Pressure test

Professional Standard - Electron

SJ/T 10144-1991 Specification for solderability test instrument by globule method
SJ/T 11384-2008 General specification of withstanding voltage tester

Professional Standard - Military and Civilian Products

WJ 234-1964 Sealing Tester
WJ 745-1994 Test method for compressive shear strength of adhesives for optical instruments

未注明发布机构

ASTM RR-B07-1002 2010 B0648-Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
DIN 12264 E:2019-08 Laboratory glassware; connections with spherical joints
DIN 51350-5 E:2013-12 Testing of lubricants - Testing in the four-ball tester - Part 5: Determination of wearing characteristics for consistent lubricants
ASTM RR-F08-1009 2009 F1888-Test Method for Compression-Displacement of Baseballs and Softballs
ASTM RR-D08-1017 2014 D0036/D0036M-Standard Test Method for Softening Point of Bitumen (Ring and Ball Apparatus)
CSA C22.2 No.160-2015(R2020) Voltage and polarity testers

国家海洋局

HY/T 046-1999 SCA2-2 pressure tide gauge

Military Standard of the People's Republic of China-General Armament Department

GJB 987A-1998 Weather balloon test methods
GJB 987.3-1990 Weather balloon test method Ozone aging test
GJB 987B-2020 Weather balloon test methods
GJB 570.7-1988 Typical test methods for meteorological instruments - barometric pressure measurement sensors

Professional Standard - Surveying and Mapping

CH/T 1053-2022 Globe - General requirements

Professional Standard - Aquaculture

SC 146-1986 Code for Acceptance of Fish Finder Test

机械工业部

JB/T 56214-1992 Guidelines for instrument reliability verification tests and measurement tests (exponential distribution)

AT-ON

ONORM E 1372-1955 Detector. Ball pressure detector, heating mandrel detector
ONORM E 1360-1960 Detector. Ball pressure detector, heating mandrel detector
ONORM E 1364-1971 Apparatus for pressure lest on shrouds.

VN-TCVN

TCVN 7497-2005 Bitumen.Test method for softening point (ring-and-ball apparatus)

British Standards Institution (BSI)

BS EN 60695-10-2:2003 Fire hazard testing - Abnormal heat - Ball pressure test
BS EN 60695-10-2:2004 Fire hazard testing - Abnormal heat - Ball pressure test
BS EN 60695-10-2:2014 Fire hazard testing. Abnormal heat. Ball pressure test method
BS ISO 9022-8:1994 Optics and optical instruments - Environmental test methods - High pressure, low pressure, immersion
BS ISO 9022-8:1995 Optics and optical instruments - Environmental test methods - High pressure, low pressure, immersion
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests. Requirements for software for tests with impulse voltages and currents

American Society for Testing and Materials (ASTM)

ASTM F1888-09 Test Method for Compression-Displacement of Baseballs and Softballs
ASTM F1888-02 Test Method for Compression-Displacement of Baseballs and Softballs
ASTM F1888-98 Test Method for Compression-Displacement of Baseballs and Softballs
ASTM F1888-09(2022) Standard Test Method for Compression-Displacement of Baseballs and Softballs
ASTM D36-06 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM F1888-09(2014) Standard Test Method for Compression-Displacement of Baseballs and Softballs
ASTM F2844-10 Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
ASTM D36/D36M-14 Standard Test Method for Softening Point of Bitumen 40;Ring-and-Ball Apparatus41;
ASTM D36/D36M-14e1 Standard Test Method for Softening Point of Bitumen &40;Ring-and-Ball Apparatus&41;
ASTM F2844-11 Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
ASTM E28-67 Standard Method Of Test For Softening Point By Ring-And-Ball Apparatus
ASTM D3511/D3511M-15 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM F2844-11(2015) Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
ASTM F2844-11(2016) Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
ASTM F1269-13 Standard Test Methods for Destructive Shear Testing of Ball Bonds
ASTM D3511/D3511M-13 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3512/D3512M-10e2 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
ASTM D3511/D3511M-10e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3512/D3512M-10e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
ASTM F1269-06 Test Methods for Destructive Shear Testing of Ball Bonds
ASTM E2546-15(2023) Standard Practice for Instrumented Indentation Testing
ASTM D3511-07a Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3511-07 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3511-05 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D2596-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D6493-99 Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
ASTM D1213-54 Test Method for Crushing Resistance of Glass Spheres (Intent to Withdraw)
ASTM E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-21 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM D6493-05 Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
ASTM E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM D6493-05(2010) Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
ASTM D2596-97 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D3512/D3512M-10(2014) Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
ASTM D2596-97(2008) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D2596-97(2002)e1 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D2783-03(2009) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
ASTM B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM E28-99(2009) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
ASTM D4970/D4970M-16 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
ASTM D7681-11(2016)e1 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D7681-11(2016) Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM B648-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM D7681-11 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D7681-11(2021) Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D2783-03(2014) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
ASTM D2783-03 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
ASTM D2596-15 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D2783-19 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
ASTM D2783-21 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
ASTM D3121-94(1999) Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM D2783-88(1998) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
ASTM D3121-17 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM D2596-14 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM F1888-09(2016) Standard Test Method for Compression-Displacement of Baseballs and Softballs
ASTM D4970/D4970M-10e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
ASTM D3121-05 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM F1881-98 Standard Test Method for Measuring Baseball Bat Performance Factor
ASTM D3121-06 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM D7971-15 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer

Korean Agency for Technology and Standards (KATS)

KS K 0500-1995 Testing method for the pilling in woven fabrics pressure method
KS C IEC 60695-10-2:2001 Fire hazard testing－Part 10：Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires－Section 2：Method for testing products made from non-metallic materials for resistance to heat using t
KS C 1001-1970 Impulse voltage testing for instrument transformers
KS C 2006-1998(2018) Ball Pressure Test Method for Thermoplastics
KS D ISO 10802-2013 Ductile iron pipelines－Hydrostatic testing after installation
KS D ISO 10802-2006(2011) Ductile iron pipelines－Hydrostatic testing after installation
KS D ISO 10802:2013 Ductile iron pipelines－Hydrostatic testing after installation
KS D ISO 10802:2006 Ductile iron pipelines-Hydrostatic testing after installation
KS B ISO 14577-1-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
KS C IEC 60695-10-2:2021 Fire hazard testing — Part 10-2:Abnormal heat — Ball pressure test method
KS B 0950-2019 Metallic materials－Instrumented indentation test for indentation tensile properties
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS M ISO 6441:2003 Paints and varnishes－Indentation test(spherical or pyramidal)
KS M ISO 6441-2005 Paints and varnishes－Indentation test(spherical or pyramidal)
KS M ISO 6441:2005 Paints and varnishes－Indentation test(spherical or pyramidal)
KS C IEC 61083-1-2006(2021) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
KS K 0499-2023 Testing method for pilling resistance of textile fabrics: Random tumble pilling tester method
KS C IEC 61083-1:2022 Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests
KS C IEC 61083-1:2006 Instruments and software used for measurement in High-voltage impulse tests－Part 1：Requirements for instruments
KS K 0499-2018 Testing method for pilling resistance of textile fabrics:Random tumble pilling tester method
KS K 0499-1983 Testing method for pilling resistance of textile fabrics:Random tumble pilling tester method
KS B ISO 14577-1-2015 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
KS B ISO 9022-8-2017(2022) Optics and optical instruments－Environmental test methods－Part 8：High pressure, low pressure, immersion
KS B ISO 9022-8:2017 Optics and optical instruments－Environmental test methods－Part 8：High pressure, low pressure, immersion
KS B ISO 9022-8-2022 Optics and optical instruments－Environmental test methods－Part 8：High pressure, low pressure, immersion
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method

American National Standards Institute （ANSI)

ANSI/ASTM F1888:2009 Test Method For Compression-displacement Of Baseballs And Softballs
ANSI/ASTM F2844:2011 Test Method for Displacement Compression of Softball and Baseball Bat Barrels

Canadian General Standards Board （CGSB)

CGSB 4.2 NO. 51.2-M87-CAN/CGSB-1987 Methodes Pour Epreuves Textiles Resistance Au Boulochage - Appareil D'Essai De Boulochage

United States Navy

NAVY MIL-V-24578 B-1988 VALVES, GLOBE, PRESSURE INSTRUMENT, STEM TEST CONNECTION, UNION END
NAVY MIL-STD-206 B CHG NOTICE 2-1993 FRICTION TORQUE TESTING FOR BEARINGS, BALL, ANNULAR (INSTRUMENT TYPE)
NAVY MIL-STD-206 B VALID NOTICE 1-1991 FRICTION TORQUE TESTING FOR BEARINGS, BALL, ANNULAR (INSTRUMENT TYPE)

SCC

CAN/CGSB 4.2 No.51.2-M87-1987 Textile testing methods - Pilling resistance - Pilling testing apparatus
BS 3900-E12:1986 Methods of test for paints-Indentation test (spherical or pyramidal)
CAN/CGSB-4.2 No./No.51.2-M87-1987 Textile Test Methods Resistance to Pilling - Random Tumble Pilling Tester
IEC 60052:1935 Rules for the measurement of test-voltage at power frequencies in dilectric tests by sphere gaps
SPC GB/T 32065.15-2019 Environmental test methods for oceanographic instruments -- Part 15: Hydrostatic pressure test (TEXT OF DOCUMENT IS IN CHINESE)
BS ISO 9022-18:1994 Optics and optical instruments. Environmental test methods-Combined damp heat and low internal pressure
UNE-EN 60695-10-2:2004 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test
BS EN 61083-1:1993 Digital recorders for measurements in high-voltage impulse tests-Requirements for digital recorders
CEI EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
BS ISO 9022-5:1994 Optics and optical instruments. Environmental test methods-Combined cold, low air pressure
BS 2782-3 METHOD 365D:1991 Methods of testing plastics. Mechanical properties-Determination of hardness by the ball indentation method
BS 5811:1979 Method of test for determination of the resistance to pilling of woven fabrics (pill testing box method)
CSA C22.2 No.160-M1985-1985(R2012) Voltage and Polarity Testers
12/30230305 DC BS EN 60695-10-2. Fire hazard testing. Part 10-2. Abnormal heat. Ball pressure test

Association Francaise de Normalisation

NF D30-500/A1:1997 Test gases - Test pressures - Appliances categories.
NF C20-924-10-2:2004 Fire hazard testing - Part 10-2 : abnormal heat - Ball pressure test.
NF R63-302:1999 Pressure gauges. Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles. Metrology, requirements and testing.
NF G07-121-1:2002 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1 : pilling box method.
NF C20-924-10-2*NF EN 60695-10-2:2014 Fire hazard testing - Part 10-2 : abnormal heat - Ball pressure test method
NF C41-105*NF EN 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1 : requirements for instruments
NF EN 61083-1:2001 Devices and software used for measurements during high voltage impulse tests - Part 1: requirements for devices
NF H00-046:1993 Packaging. Complete, filled transport packages. Stacking test using compression tester.
NF C41-105:1993 Digital recorders for measurements in high-voltage impulse tests. Part 1 : requirements for digital recorders.
NF P90-108:1993 Sports field. Indentation resistance test of football cleats on sanded synthetic turf
NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method

KR-KS

KS C 2006-1998(2023) Testing method for ball pressure of thermoplastics
KS C IEC 60695-10-2-2021 Fire hazard testing — Part 10-2:Abnormal heat — Ball pressure test method
KS M ISO 6441-2003 Paints and varnishes－Indentation test(spherical or pyramidal)
KS C IEC 61083-1-2022 Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests
KS B ISO 9022-8-2017 Optics and optical instruments－Environmental test methods－Part 8：High pressure, low pressure, immersion
KS P ISO 12867-2021 Ophthalmic instruments — Trial frames

German Institute for Standardization

DIN 51350-4:2015 Testing of lubricants - Testing in the four-ball tester - Part 4: Determination of welding load of consistent lubricants
DIN EN 60695-10-2:2004 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test (IEC 60695-10-2:2003); German version EN 60695-10-2:2003
DIN EN 837-1:1997 Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-1:1996
DIN 12244-1:1979 Laboratory glassware; interchangeable spherical ground joints
DIN 51350-4:1984 Testing of lubricants; testing by the Shell four-ball tester; determination of welding load of consistent lubricants
DIN ISO/TS 17892-5:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test (ISO/TS 17892-5:2004); German version CEN ISO/TS 17892-5:2004
DIN EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001
DIN 51350-5:1984 Testing of lubricants; testing by the Shell four-ball tester; determination of wear characteristics for consistent lubricants
DIN 51350-5:2015 Testing of lubricants - Testing in the four-ball tester - Part 5: Determination of wearing characteristics for consistent lubricants
DIN 12264:1977 Laboratory glassware; connections with spherical joints
DIN 53325:1974 Testing of leather; ball compression test for determination of grain expansion capacity and the force of fracture with the lastometer
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002
DIN 51350-1:2015 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN 51350-6:1996 Testing of lubricants - Testing in the Shell four-ball tester - Part 6: Determination of shear stability of lubricating oils containing polymers
DIN 51350-1:2010 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN ISO 9022-8:2000 Optics and optical instruments - Environmental test methods - Part 8: High pressure, low pressure, immersion (ISO 9022-8:1994)

Indonesia Standards

SNI 12-3812-1995 Strike test instrument for badminton ball
SNI 12-3813-1995 Reflect test instrument for ball
SNI 12-4247-1996 Abrasion resistance testing instrument for basket ball
SNI ASTM D2783:2011 Standard test method for measurement of extreme-pressure properties of lubricating fluids (Four-Ball Method)

RU-GOST R

GOST IEC 60695-10-2-2013 Fire hazard testing. Part 10-2. Abnormal heat. Ball pressure test
GOST 8291-1983 Dead-weight preassure-gauge testers. General technical requirements
GOST 29078-1991 Leather. Spherical tension test method

TH-TISI

TIS 2381.10-2-2009 Fire hazard testing.part 10-2: abnormal heat.ball pressure test
TIS 1216-1994 Standard test method for softening point of bituminous meterials (ring-and-ball apparatus)
TIS 2195-2004 Ductile iron pipelines.hydrostatic testing after installation

International Organization for Standardization (ISO)

ISO 10802:1992 Ductile iron pipelines; hydrostatic testing after installation
ISO 6441:1984 Paints and varnishes; Indentation test (spherical or pyramidal)
ISO 10802:2020 Ductile iron pipelines — Hydrostatic testing after installation
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method

IT-UNI

UNI ISO 10802:2020 Ductile iron pipelines — Hydrostatic testing after installation

International Electrotechnical Commission (IEC)

IEC 60695-10-2:2003 Fire hazard testing - Part 10-2: Abnormal heat; Ball pressure test
IEC 60695-10-2/COR1:2006 Fire hazard testing - Part 10-2: Abnormal heat; Ball pressure test; Corrigendum 1
IEC 61083-1:2021 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
IEC 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat; Ball pressure test
IEC 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments

European Committee for Standardization (CEN)

EN 837-1:1996 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
prEN 61083-1-1992 Digital recorders for measurements in high-voltage impulse tests; part 1: requirements for digital recorders (IEC 1083-1:1991)
EN ISO 12867:2010 Ophthalmic instruments - Trial frames (ISO 12867:2010)

HU-MSZT

MNOSZ 2137-1955 Spherical cryogenic glass apparatus for laboratory use
MSZ 21302-1966 Laboratory glassware, narrow short neck star flask

GSO

GSO ISO 10802:2023 Ductile iron pipelines — Hydrostatic testing after installation
BH GSO ISO 10802:2023 Ductile iron pipelines — Hydrostatic testing after installation
BH GSO IEC 61083-1:2023 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
OS GSO IEC 61083:2007 Instruments and software used for measurement in high- voltage impulse tests - Part 1: Requirements for instruments
BH GSO ISO 9022-8:2015 Optics and optical instruments – Environmental test methods - Part 8:High pressure, low pressure, immersion
OS GSO ISO 9022-8:2013 Optics and optical instruments – Environmental test methods - Part 8:High pressure, low pressure, immersion

Standard Association of Australia （SAA）

AS 61083.1:2006 Instruments and software used for measurement in high-voltage impulse tests - Requirements for instruments

Japanese Industrial Standards Committee (JISC)

JIS C 60695-10-2:2008 Fire hazard testing -- Part 10-2: Abnormal heat -- Ball pressure test
JIS C 60695-10-2:2018 Fire hazard testing -- Part 10-2: Abnormal heat -- Ball pressure test method
JIS S 8602:1984 Test records
JIS B 7912-8:2010 Field procedures for testing geodetic and surveying instruments -- Part 8: GNSS (RTK)
JIS B 7922:2017 Electronic Wet-bulb globe temperature (WBGT) index meter

RO-ASRO

STAS 8618-1979 MINERAL OILS Determination of resistance to high pressures with four balls testing machine
STAS 11053/8-1978 Testing devices for electrical purposesBALL PRESSURE APPARATUS

U.S. Military Regulations and Norms

ARMY A-A-52412 A-2011 INCLINOMETER, BALL STYLE

Lithuanian Standards Office

LST EN 60695-10-2-2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method (IEC 60695-10-2:2014)

AENOR

UNE-EN 61083-1:2002 Instruments and software used for measurement in high-voltage impulse tests -- Part 1: Requirements for instruments.

GM Daewoo

GMKOREA EDS-T-7742-2011 Steel Ball Impact Test

CENELEC - European Committee for Electrotechnical Standardization

EN 61083-1:1993 Digital recorders for measurements in high-voltage impulse tests Part 1: Requirements for digital recorders

National Electrical Manufacturers Association（NEMA)

NEMA WC 53-2008 STANDARD TEST METHODS FOR EXTRUDED DIELECTRIC POWER, CONTROL, INSTRUMENTATION, AND PORTABLE CABLES FOR TEST

Society of Automotive Engineers (SAE)

SAE AIR5026A-2011 Test Cell Instrumentation
SAE AIR5026-1996 Test Cell Instrumentation
SAE J211A-1971 INSTRUMENTATION FOR IMPACT TESTS
SAE J1367-2012 Performance Test Procedure Ball Joints and Spherical Rod Ends
SAE J211B-1974 INSTRUMENTATION FOR IMPACT TEST
SAE J977A-1968 INSTRUMENTATION FOR LABORATORY IMPACT TESTS

Danish Standards Foundation

DS/EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
DS/EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests – Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

The American Road & Transportation Builders Association

AASHTO T 53-2009(R2018) Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO T 53-2011 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)

CZ-CSN

CSN 02 4633-1989 Instrument precision ball bearings
CSN 02 4633 Z1-1996 Instrument precision ball bearings

SAE - SAE International

SAE J211-2004 INSTRUMENTATION FOR IMPACT TEST (PDF IS NOT AVAILABLE)
SAE J977-1966 INSTRUMENTATION FOR LABATORY IMPACT TESTS

GB-REG

REG NASA-LLIS-0372-1995 Lessons Learned - Loss of Instruments Caused by Balloon-Gondola Incident

AASHTO - American Association of State Highway and Transportation Officials

T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-2006 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-2009 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-1992 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)

YU-JUS

JUS B.G8.152-1987 Methods of phisical testing of iron ores. tron ore pellets. Determination of crushing strength

(U.S.) Ford Automotive Standards

FORD FLTM BJ 014-01-2001 MODIFIED FOUR-BALL FRICTION TEST

ESDU - Engineering Sciences Data Unit

SPF-M3-7-2007 Developing a high temperature and pressure fluid dynamic gauge for the crude oil annular test section.

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0432-7-2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001

Others: Mercury porosimeter test method,Ball Pressure Tester