Propylene Production Method

Propylene Production Method, Total:408 items.

The international standard classification for "Propylene Production Method" includes: Rubber , Aliphatic hydrocarbons , Thermoplastic materials , Plastics , Equipment for the chemical industry , Latex and raw rubber , Plastics pipes, fittings and valves , Occupational safety. Industrial hygiene .

The Chinese standard classification for "Propylene Production Method" includes: Synthetic rubber , Basic organic chemicals , Synthetic resin and plastic , Rubber products in general , Water treatment agent , Basic standards and general methods for synthetic resin and plastic , Hygiene, safety and labor protection , Basic standard and general method for synthetic rubber , Non-metal chemical machinery equipment , Plastic profile , Labor sanitation .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8661-1988 Determination of residual acrylonitrile monomer content in acrylonitrile-butadiene-styrene resin by gas chromatography
GB/T 33085-2016 Water treatment chemicals一Poly(diallyldimethyIammonium chloride)
GB/T 42268-2022 Rubber，ethylene-propylene-diene(EPDM)—Evaluation procedure
GB/T 10009-1988 Acrylonitrile--Butadiene--Styrene (ABS) plastics extrusion plates
GB/T 9353-1988 Determination of residual styrene monomer in Acrylonitrile-Butadiene-Styrene(ABS) resin by gas chromatography
GB 29966-2013 National Food Safety Standard Food Additive Identification Allyl disulfide
GB 12672-1990 Acrylonitrile-butadiene-styrene (ABS) resin
GB 29960-2013 National Food Safety Standard Food Additive Identification Allyl disulfide Food Additive Identification Diallyl sulfide
GB/T 31403-2015 Plastics―Acrylonitrile-butadiene-styrene/poly(methyl methacrylate) alloy
GB/T 42620-2023 Additive manufacturing—Acrylonitrile-butadiene-styrene (ABS) filament for material extrusion
GB/T 13290-1991 Propylene and butadiene for industrial use－Sampling in the liquid phase
GB/T 24797.3-2014 Film for wrapping rubber bales―Part 3:Ethylene-propylene-diene rubber(EPDM),acrylonitrilebutadiene rubber(NBR),hydrogenated nitrile-butadiene rubber(HNBR),acrylic-ethylene rubber(AEM) and acrylic rubber(ACM)
GB/T 13290-2014 Propylene and butadiene for industrial use―Sampling in the liquid phase
GB/T 14837.1-2014 Rubber and rubber products―Determination of the composition of vulcanizates and uncured compounds by thermogravimetry―Part 1:Butadiene,ethylene-propylene copolymer and terpolymer,isobutene-isoprene,isoprene and styrene-butadiene rubbers
GB/T 12672-2009 Acrylonitrile-butadiene-styrene(ABS)resin

Professional Standard - Petrochemical Industry

SH/T 1548-2004 1-Butene for industrial use -- Determination of trace propadience and propyne -- Gas chromatographic method
SH/T 1841-2023 Rubber, ethylene-propylene-diene (EPDM)
SH/T 1743-2011 Rubber ethylene-propylene-diene(EPDM)—Evaluation procedure
SH/T 1159-2010 Acrylonitrile-butadiene rubber（NBR）——Determination of the swelling ratio
SH/T 1157.1-2012 Rubber, raw-Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -Part 1 : Combustion (Dumas)method
SH/T 1157.2-2015 Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile. butadiene rubber(NBR). Part 2: Kjeldahl method
SH/T 1743-2004 Rubber, ethylene-propylene-diene (EPDM)-Evaluation procedure
SH/T 1751-2005 Determination of ethylene units in ethylene-propylene copolymer (EPM) and ethylene-propylene-diene terpolymers (EPDM)
SH/T 1611-2004 Acrylonitrile-butadiene rubber (NBR) -- Evaluation procedure

Group Standards of the People's Republic of China

T/SDAS 723-2023 1,3-Dichloropropene
T/HEBQIA 121-2022 1,3-Dichloropropene
T/CSTM 00539-2021 Liquid random acrylonitrile-butadiene rubber
T/CPCIF 0229-2022 Dimethyldiallylammonium chloride by-product sodium chloride
T/CSTM 00538-2021 Liquid acrylonitrile-butadiene rubber
T/CPCIF 0136-2021 2-Hydroxyethyl methacrylate，Hydroxypropyl methacrylate（mixture of 2-hydroxypropyl and 2-hydroxy-1-methylethyl methacrylate）& Hydroxypropyl acrylate（mixture of 2-hydroxypropyl and 2-hydroxy-1-methylethyl acrylate）for industrial use
T/SDHCIA 021-2022 Mixted solution of acrylic acid dimer and acrylic acid
T/GDPIA 39-2021 Paint-free acrylonitrile-butadiene-styrene (ABS) material
T/ZZB 1674-2020 Acrylonitrile-Butadiene-Styrene（ABS） children's building block toys
T/JGWS 3-2021 Reinforced recycled acrylonitrile-butadiene-styrene compound
T/SDEPI 019-2021 By product cis-1,3-dichloropropene from epichlorohydrin production
T/SDEPI 020-2021 By product trans-1,3-dichloropropene from epichlorohydrin production
T/JSBC 3-2020 Flame retardant recycled acrylonitrile-butadiene-styrene compound
T/NBSL 002-2022 Flame Retardant ABS
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/ZZB 2983-2022 Ethyl 3-(N,N-dimethylamino)acrylate
T/SDEPI 021-2021 By product 2,3-dichloropropene from epichlorohydrin production

Taiwan Provincial Standard of the People's Republic of China

CNS 11286-1985 Method of Test for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics
CNS 13347-1994 Method of Test for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Fittings for Water Works
CNS 10014-1983 Method of Test for Acrylonitrial Butadiene Rubber (NBR)
CNS 11338-1985 Method of Test for Acrylonitrile-Butadiene-Styrene Sheets
CNS 13159-1995 Method of Test for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipes for Water Works
CNS 10013-1983 Method of Test for Acrylonitrile Butadiene Rubber (NBR) Latex
CNS 13158-1995 Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipes for Water Works
CNS 11337-1985 Acrylonitrile-Butadiene-Styrene (ABS) Sheets
CNS 11285-1985 Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics

Professional Standard - Chemical Industry

HG/T 2643-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) diaphragm valve
HG/T 6285-2024 Test method for the activity of catalysts for the oxidation of methacrolein to methacrylic acid
HG/T 21561-1994 The ABS pipes and fittings series
HG/T 2737-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) ball valve
HG/T 6281-2024 Test method for catalyst activity of propylene oxidation to acrolein
HG/T 21561-1994（编制说明） Acrylonitrile Butadiene Styrene (ABS) Pipe and Fittings
HG/T 4947~4948-2016 Cosmetic ingredients-Lauryl phosphate

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34685-2017 Acrylonitrile-butadiene rubber(NBR)-Evaluation procedure
GB/T 36089-2018 Acrylonitrile-butadiene rubber(NBR)

未注明发布机构

ASTM RR-D11-1065 1993 D3900-Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN EN ISO 19062-2 E:2018-03 Plastics Acrylonitrile Butadiene Styrene (Draft)
DIN EN ISO 19066-2 E:2019-04 Plastic Methyl Methacrylate Acrylonitrile Butadiene Styrene (Draft)
AS/NZS 3518:2013(R2018) Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications
ASTM D2282-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe
ASTM RR-D11-1021 1982 D3900-Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry

工业和信息化部

HG/T 4948-2016 Tripropylene glycol diacrylate for photosensitive materials
HG/T 5592-2019 Analytical method of chemical composition in oxidation of methylacrolein to methacrylic acid catalyst
HG/T 5360-2018 Dimethyldiallylammonium chloride for water treatment chemicals
SH/T 1831-2020 Determination of free acrylonitrile content in acrylonitrile-butadiene rubber-Headspace gas chromatography
SH/T 1814-2020 Determination of vanadium content in ethylene- -propylene copolymer( EPM) and ethylene- -propylene- -diene terpolymers( EPDM)

国家能源局

SH/T 1814-2017 Determination of vanadium in ethylene-propylene copolymer (EPM) and ethylene-propylene-diene terpolymer (EPDM) spectrophotometrically

Professional Standard - Light Industry

QB/T 2894-2007 Acrylonitrile-butadiene-styrene(ABS) color masterbatch
QB/T 2029-1994 ABS/PVC Sheet Material

Military Standard of the People's Republic of China-General Armament Department

GJB 2050A-2020 Specification for carboxyl-terminated polybutadiene acrylonitrile
GJB 2050-1994 Specification for carboxyl-terminated polybutadiene acrylonitrile

Professional Standard - Commodity Inspection

SN/T 3470.1-2013 Rubber||raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR). Part 1:Combustion method
SN/T 3470.2-2013 Rubber||raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR). Part 2:Kjeldahl method

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1456-2014 Acrylic and polybutadiene anodic electrocoats

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39694-2020 Hydrogenated acrylonitrile-butadiene rubber (HNBR)—General specification and evaluation procedure
GB/T 37427-2019 Plastics—Acrylonitrile-butadiene-styrene(ABS) compound for automobile

中国石油化工总公司

SH 1504-1992 Acrylonitrile-Butadiene-Styrene (ABS) Molding and Extrusion Compound Nomenclature

中华人民共和国国家卫生和计划生育委员会

GBZ/T 300.80-2017 Determination of toxic substances in workplace air—Part 80: Allyl chloride and dichloropropylene

Association Francaise de Normalisation

NF T20-803:1976 Propylene. Determination of the propene and propadine. Gas phase chromatographic method.
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF T20-816*NF ISO 8174:1987 Ethylene and propylene for industrial use. Determination of acetone, acetonitrile, propan-2-ol and methanol. Gas chromatographic method.
NF D11-140:2010 Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods.
NF T53-038-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T20-818*NF ISO 8563:1987 Propylene and butadiene for industrial use. Sampling in the liquid phase.
NF ISO 8563:1987 Propylène et butadiene à usage industriel - Échantillonnage en phase liquide
NF D11-141*NF EN 15720:2010 Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T53-038-2*NF EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF EN ISO 2507-3:2017 Tubes and fittings made of thermoplastic materials - Vicat softening temperature - Part 3: special test conditions for tubes and fittings made of acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA)
NF EN ISO 15493:2004 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for com...
NF EN ISO 15493/A1:2017 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for com...

BR-ABNT

ABNT EB-631-1979 Ethylene propylene glycol

American Society for Testing and Materials (ASTM)

ASTM F2806-23 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ASTM F2806-20 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ASTM F2806-10(2015) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ASTM D3187-06(2011) Standard Test Methods for Rubbermdash;Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM F2806-10 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ASTM D3900-95(2000) Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers)
ASTM D3900-95(2004)e1 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM UOP1014-17 Determination of Trace Propadiene and Methyl Acetylene Impurities in Polymer Grade Propylene by Gas Chromatography
ASTM F2806-10e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ASTM D3900-05 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D2993-98 Standard Specification for Acrylonitrile-Butadiene Rubberized Tar
ASTM D4415-91(2000)e1 Standard Test Methods for Determination of Dimer in Acrylic Acid
ASTM D3187-00 Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM D3900-05a Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D4415-91(1996)e1 Standard Test Methods for Determination of Dimer in Acrylic Acid
ASTM D4415-05 Standard Test Methods for Determination of Dimer in Acrylic Acid
ASTM D6047-17 Standard Test Methods for Rubber, Raw&x2014Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D3187-06 Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
ASTM D6047-99(2009) Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D6047-99(2003) Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D5492-06 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
ASTM D6047-99(2014) Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D5492-98 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
ASTM D6047-15 Standard Test Methods for Rubber, Raw&x2014Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D3900-15 Standard Test Methods for Rubber&x2014Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D3187-06(2016) Standard Test Methods for Rubber&x2014Evaluation of NBR (Acrylonitrile-Butadiene Rubber)

German Institute for Standardization

DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DIN EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003); German version EN ISO 10366-2:2003
DIN EN ISO 15493/A11:2021-07 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 154...

International Organization for Standardization (ISO)

ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 20299-3:2008 Film for wrapping rubber bales - Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
ISO 8174:1986 Ethylene and propylene for industrial use; Determination of acetone, acetonitrile, propan-2-ol and methanol; Gas chromatographic method
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure
ISO 4097:2007 Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 24048:2022 Plastics — Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
ISO 4097:2020 Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure
ISO 8563:1987 Propylene and butadiene for industrial use; Sampling in the liquid phase
ISO 4658:2020 Acrylonitrile-butadiene rubber (NBR) — Evaluation procedure
ISO 8563:2023 Propylene and butadiene for industrial use — Sampling in the liquid phase
ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR) - Evaluation procedure
ISO/PRF 8563 Propylene and butadiene for industrial use — Sampling in the liquid phase
ISO 24698-1:2018 Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Part 1: Combustion (Dumas) method
ISO 24698-1:2008 Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Part 1: Combustion (Dumas) method
ISO 9924-1:2000 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 4658:1990 Rubber, acrylonitrile-butadiene (NBR); evaluation procedure
ISO 9924-1:2016 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 9924-1:2023 Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 24698-2:2008 Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Part 2: Kjeldahl method
ISO 10366-1:2002 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materialsPart 1:Designation system and basis for specifications
ISO 4097:1991 Rubber, ethylene-propylene-diene (EPDM); general purpose types; evaluation procedure
ISO 10366-1:1993 Plastics; methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials; part 1: designation system and basis for specifications
ISO 16565:2002 Rubber - Determination of 5-ethylidenenorbonene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
ISO 10366-2:1994 Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 10366-2:2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 16565:2013 Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
ISO 19066-2:2020 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 9924-1:1993 Rubber and rubber products; determination of composition of vulcanizates and uncured compounds by thermogravimetry; part 1: butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 16565:2008 Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers

Korean Agency for Technology and Standards (KATS)

KS M 3845-2010 Plastics-Recycled moulding materials-Acrylonitrile/butadiene/styrene(ABS)
KS M ISO 8563-2002(2012) Propylene and butadiene for industrial use－Sampling in the liquid phase
KS M 3351-1982 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-1986 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M ISO 8174:2007 Ethylene and propylene for industrial use－Determination of acetone, acetonitrile, propan－2－ol and methanol－Gas chromatographic method
KS M 3351-2002 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-2016(2021) Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3347-2022 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3351-1979(1997) ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-2011 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3347-2016 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M ISO 8174:2017 Ethylene and propylene for industrial use — Determination of acetone, acetonitrile, propan-2-ol and methanol — Gas chromatographic method
KS M ISO 4097:2021 Rubber, ethylene-propylene-diene(EPDM) — Evaluation procedure
KS M ISO 20299-3:2012 Film for wrapping rubber bales-Part 3:Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
KS M ISO 24698-2:2010 Rubber, raw－Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR)－Part 2：Kjeldahl method
KS M 3356-2016 Diallyl phthalate molding compounds
KS M 3356-2021 Diallyl phthalate molding compounds
KS M 3356-1981 Diallyl phthalate molding compounds
KS M ISO 4658:2011 Acrylonitrile-butadiene rubber(NBR)-Evaluation procedure
KS M ISO 8563:2013 Propylene and butadiene for industrial use－Sampling in the liquid phase
KS M ISO 8563:2002 Propylene and butadiene for industrial use-Sampling in the liquid phase
KS M ISO 4658:2016 Acrylonitrile-butadiene rubber(NBR)－Evaluation procedure
KS M ISO 4658:2022 Acrylonitrile-butadiene rubber(NBR) — Evaluation procedure
KS M ISO 24698-1:2010 Rubber, raw－Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR)－Part 1：Combustion(Dumas) method
KS M 3356-2016(2021) Diallyl phthalate molding compounds
KS M ISO 12092-2005(2015) Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride)(PVC－U), chlorinated poly(vinyl chloride) (PVC－C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-
KS M ISO 24698-1:2021 Rubber, raw — Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) —Part 1: Combustion (Dumas) method
KS M ISO 9924-1:2007 Rubber and rubber products－Determination of the composition of vulcanizates and uncured compounds by thermogravimetry－Part 1：Butadiene, ethylene－propylene copolymer and terpolymer,isobutene－isoprene, isoprene and styrene-butadiene rubbers
KS M ISO 10366-2:2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 9924-1:2017 Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
KS M 3845-2020 Plastics－Recycled moulding materials－Acrylonitrile/butadiene/styrene(ABS)
KS M ISO 9924-1-2022 Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
KS M ISO 10366-2:2006 Plastics-Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 16565-2022 Rubber — Determination of 5-ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene-propylene-diene(EPDM) terpolymers
KS M ISO 10366-2-2016(2021) Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M 3845-2010(2020) Plastics－Recycled moulding materials－Acrylonitrile/butadiene/styrene(ABS)
KS M ISO 10366-2-2021 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 4097:2009 Rubber, ethylene-propylene-diene(EPDM)－Evaluation procedure
KS M ISO 16565:2007 Rubber－Determination of 5－ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene－propylene－diene(EPDM) terpolymers
KS M ISO 16565:2017 Rubber — Determination of 5-ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene-propylene-diene(EPDM) terpolymers

SAE - SAE International

SAE AMS3217/2C-2012 Test Slabs@ Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile@ 65 - 75
SAE AMS3217/2-1983 Test Slabs@ Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile@ 65 - 75
SAE AMS3217/2A-1993 Test Slabs@ Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile@ 65 - 75
SAE AMS3217/1A-1993 Test Slabs@ Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile@ 65 - 75
SAE AMS3217/1-1983 TEST SLABS@ ACRYLONITRILE BUTADIENE (NBR-H) High Acrylonitrile@ 65 – 75
SAE AMS3202N-2018 Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 55 - 65
SAE AMS3201M-2018 Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 35 - 45
SAE AMS3214J-1983 ACRYLONITRILE BUTADIENE (NBR) RUBBER Aromatic Fuel Resistant 35 - 45
SAE AMS3202K-1998 Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 55 - 65
SAE AMS3213K-1985 ACRYLONITRILE BUTADIENE (NBR) RUBBER Aromatic Fuel Resistant 75 - 85
SAE AMS3213M-2017 Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 - 85

British Standards Institution (BSI)

BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS ISO 20299-3:2008 Film for wrapping rubber bales - Ethylene-propylene-diene rubber (EPDM), acrylonitrile- butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
BS EN 15719:2010 Sanitary appliances. Baths made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods
BS ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
BS ISO 4097:2007 Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure
BS EN 15719:2009 Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
BS ISO 24698-1:2008 Rubber, raw - Determination of bound Acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Combustion (Dumas) method
BS ISO 24698-2:2008 Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Kjeldahl method
BS ISO 24048:2022 Plastics. Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS ISO 4658:2020 Acrylonitrile-butadiene rubber (NBR). Evaluation procedure
BS ISO 8563:2023 Propylene and butadiene for industrial use. Sampling in the liquid phase
BS EN 2104:1996(1999) Acrylonitrile - butadiene rubber (NBR) — Hardness 40 IRHD
BS 5391-1:2006 Acrylonitrile-butadiene-styrene (ABS) pressure pipe - Specification
BS ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR) - Evaluation procedure
BS ISO 4658:2000 Acrylonitrile-butadiene rubber (NBR) - Evaluation procedure
BS ISO 9924-1:2001 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS ISO 9924-1:2016 Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS EN ISO 19066-2:2020 Plastics. Methyl methacrylate-acrylonitrile-butadienestyrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
22/30396487 DC BS ISO 24048. Plastics. Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
BS ISO 9924-1:2000 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS ISO 9924-1:2023 Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS ISO 16565:2013 Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylenepropylene-diene (EPDM) terpolymers
22/30452602 DC BS ISO 8563. Propylene and butadiene for industrial use. Sampling in the liquid phase
BS 5391-1:2006(2011) Acrylonitrile - butadiene - styrene (ABS) pressure pipe – Part 1 : Specification
20/30388677 DC BS ISO 4658. Acrylonitrile-butadiene rubber (NBR). Evaluation procedure

Society of Automotive Engineers (SAE)

SAE AMS3217/2B-2004 Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
SAE AMS3217/2B-1998 Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
SAE AMS3217/2D-2020 Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
SAE AMS3260B-1990 Ethylene-Propylene-Diene (EPDM) Rubber, General Purpose, 45-55
SAE AMS3217/1B-1998 Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
SAE AMS3217/1B-2013 Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
SAE AMS3217/1C-2019 Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
SAE AS3551A-2020 O-Ring Molded from AMS7272 Butadiene-Acrylonitrile Rubber (NBR)
SAE AMS3260C-2009 Ethylene-Propylene-Diene (EPDM) Rubber, General Purpose, 45-55
SAE AMS7260E-2017 Rings, Butadiene-Acrylonitrile (NBR) Rubber, Molded Fuel and Low Temperature Resistant 70 - 80
SAE AS3569A-2021 O-RING MOLDED FROM AMS7270 BUTADIENE-ACRYLONITRILE (NBR) RUBBER MATERIAL
SAE AMS3249C-1993 Ethylene Propylene (EPDM) Rubber Hydrazine-Base-Fluid Resistant 75 - 85
SAE AMS7260E-1994 Rings, Butadiene-Acrylonitrile (NBR) Rubber, Molded Fuel and Low Temperature Resistant 70 - 80
SAE AMS3201K-1998 Butadiene Acrylonitrile (NBR) Rubber, Dry Heat Resistant, 35-45
SAE AMS3202L-1998 Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant, 55-65
SAE AMS-A-8576-1997 Adhesive, Acrylic Base, for Acrylic Plastic
SAE AMS3214K-2007 Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 35 - 45
SAE AMS3215N-2019 Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 - 75
SAE AMS3213L-1991 Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 - 85
SAE AMS3213N-2023 Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 - 85
SAE AMS3214M-2019 Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 35 - 45
SAE AMS7274H-1991 Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Oil Resistant 65 - 75
SAE AMS3215L-2003 ACRYLONITRILE BUTADIENE (NBR) RUBBER Aromatic Fuel Resistant 65 - 75
SAE AMS3212N-1998 Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 55 - 65
SAE AMS3213L-2001 Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 - 85
SAE AMS7274H-1995 RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER Oil Resistant 65 - 75
SAE AMS3212M-1985 ACRYLONITRILE BUTADIENE (NBR) RUBBER Aromatic Fuel Resistant 55 - 65
SAE AMS3215K-1985 ACRYLONITRILE BUTADIENE (NBR) RUBBER Aromatic Fuel Resistant 65 - 75

Danish Standards Foundation

DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

CEN - European Committee for Standardization

EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 10366-1:2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

AENOR

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

SCC

DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
BS 6064:1981 Methods of test for raw acrylonitrile-butadiene (NBR) rubber
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
AWWA B451-2023 Poly(Diallyldimethylammonium Chloride)
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
AWWA B451-2016 Poly(Diallyldimethylammonium Chloride)
HOLDEN HN 1259-2007 ACRYLONITRILE BUTADIENE STYRENE (ABS) COMPOUNDS
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
BS 6063:1981 Methods of test for non-oil extended raw general purpose ethylene-propylene-diene rubbers (EPDM)
HOLDEN HN 1259-2012 Acrylonitrile Butadiene Styrene ABS Compounds
06/30150431 DC ISO 4097. Rubber, ethylene-propylene-diene (EPDM) Evaluation procedure
07/30161577 DC BS ISO 20299-3. Film for wrapping rubber bales. Part 3. Ethylene-propylene-diene rubber (EPDM), acrylonitrile- butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
BS 4935:1989 Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
BS EN ISO 10366-2:1999 Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
HOLDEN HN 2411-2004 ACRYLONITRILE BUTADIENE STYRENE (ABS) AND POLYAMIDE 6 ALLOYS
HOLDEN HN 2411-2012 Acrylonitrile Butadiene Styrene ABS and Polyamide 6 Alloys
BS EN ISO 10366-2:2003 Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS 2751:1990 Specification for general purpose acrylonitrile-butadiene rubber compounds
BS ISO 16565:2002 Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
07/30162094 DC BS ISO 24698-2. Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR). Part 2. Kjedahl method
07/30162068 DC BS ISO 24698-1. Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR). Part 1. Combustion (Dumas) method
BS ISO 16565:2008 Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
10/30212482 DC BS ISO 4658. Acrylonitrile-butadiene rubber (NBR). Evaluation procedure
BS EN ISO 2580-2:2003 Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials-Preparation of test specimens and determination of properties

European Committee for Standardization (CEN)

EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN 2104:1996 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD
EN ISO 10366-2:1999 Plastics - Methyl Methacrylate/Acrylonitrile/Butadiene/Styrene (MABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 10366-2:1994
EN ISO 10366-2:2003 Plastics Methyl methacrylate - acrylonitrile - butadiene- styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties ISO 10366-2:2003
EN ISO 10366-1:1999 Plastics - Methyl Methacrylate/Acrylonitrile/Butadiene/ Styrene (MABS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications ISO 10366-1:1993
EN ISO 2580-2:1999 Plastics - Acrylonitrile/Butadiene/Styrene (ABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 2580-2: 1994
EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)

Japanese Industrial Standards Committee (JISC)

JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6873:1975 Acrylonitrile-butadiene-styrene (ABS) sheets
JIS K 6874:1995 Testing methods for ABS resins
JIS K 6918:1995 Diallyl phthalate molding compounds
JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS K 6938-1:2006 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6226-1:2003 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
JIS K 6938-2:1999 Plastics -- Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6938-2:2007 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6938-1:1999 Plastics -- Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6747:1995 Polypropylene moulding materials

RO-ASRO

STAS 10024-1975 ACRYLONITRILE- BUTADIENE - STYRENE COPOLYMER

GM Europe

GME QK 001244-1998 Acrylnitril-Butadien-Styrol-Terpolymerisat Methylmethacrylate-Acrylonitrile-Butadiene-Styrene-Polymer English Translation Available
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME QK 000974-2008 Polypropylene/ethylene propylene diene rubber blend.English/Germany
GME QK 002500-2006 Reinforced blend of acrylonitrile-butadiene-styrene copolymer (ABS) and acrylic-styrene-acrylonitrile (ASA) English/German
GME QK 001952-2003 ABS ABS English/German
GME QK 001956-2003 ABS ABS English/German
GME QK 000262-1996 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene-Styrene Terpolymer English/German
GME QK 001951-2009 Acrylnitril-Butadien-Styrol Terpolymerisat Acrylonitrile-Butadien-Styrene Terpolymer English/German
GME QK 001951-2003 ABS ABS English/German
GME TM 411300-1976 ABS-Folie ABS-Foil German
GME QK 001249-1993 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene Styrene-Terpolymer English/German
GME QK 000273-1996 Acrylnitril-Butadien-Styrol Terpolymerisat Acrylonitrile-Butadiene-Styrene-Terpolymer English/German
GME QK 001909-2007 Blend from PBT and ASA with glass fibers Blend from PBT and ASA with Glass Fibers English/German

IT-UNI

UNI 7041-1972 Acrylonitrile. Butadiene. Styrene (ABS) thermoplastic material. Classification

US-FCR

FCR VA 07 53 23-2011 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING
FCR UFGS-07 53 23-2012 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING
FCR AF ETL 90-8-1990 ETHYLENE PROPYLENE DIENE MONOMER (EPDM) ROOFING, GUIDE SPECIFICATION FOR

GSO

BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 8174:2008 Ethylene and propylene for industrial use - Determination of acetone, acetonitrile, propan-2-ol and methanol - Gas chromatographic method
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 8563:2008 Propylene and butadiene for industrial use - Sampling in the liquid phase
GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 8563:2008 Propylene and butadiene for industrial use - Sampling in the liquid phase
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
BH GSO ISO 16565:2016 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
GSO ISO 10366-2:2013 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
OS GSO ISO 16565:2014 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
GSO ISO 16565:2014 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
BH GSO ISO 10366-2:2016 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
GSO ISO 9924-1:2014 Rubber and rubber products -Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
OS GSO ISO 10366-2:2013 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

American Water Works Association (AWWA)

ANSI/AWWA B451-23 Poly(Diallyldimethylammonium Chloride)
AWWA B451-1998 Poly(Diallyldimethylammonium Chloride)
AWWA B451-2010 Poly(Diallyldimethyl-ammonium Chloride)

TH-TISI

TIS 2357-2007 Acrylonitrile.butadiene.styrene (abs) pressure pipe
TIS 655.3-2011 Plastic utensils for food.part 3: acrylonitrile-butadiene-styrene and styrene.acrylonitrile

KR-KS

KS M ISO 4097-2021 Rubber, ethylene-propylene-diene(EPDM) — Evaluation procedure
KS M ISO 4658-2022 Acrylonitrile-butadiene rubber(NBR) — Evaluation procedure
KS M ISO 10366-2-2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 24698-1-2021 Rubber, raw — Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) —Part 1: Combustion (Dumas) method
KS M ISO 16565-2017 Rubber — Determination of 5-ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene-propylene-diene(EPDM) terpolymers

American National Standards Institute （ANSI)

ANSI/AWWA B451-2016 Poly(Diallyldimethylammonium Chloride)
ANSI/ASTM D5492:1998 Test Method for Determination of Xylene Solubles in Propylene Plastics
ANSI/AWWA B451-2023 Standard for Poly (Diallyldimethylammonium Chloride)
ANSI/ASTM F2969:2012 SPECIFICATION FOR ACRYLONITRILE-BUTADIENE-STYRENE (ABS) IPS DIMENSIONED PRESSURE PIPE

ZA-SANS

CKS 489-1977 EPDM-styrene rubber sheet (for waterproofing)

GM Daewoo

GMKOREA EDS-M-4315-2012 Blow molding acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-4301-2012 Heat Resistance Acrylonitrile- Butadiene-Styrene Copolymer
GMKOREA EDS-M-4309-2012 Weather Resistant Acrylonitrile-Butadiene- Stylene Copolymer
GMKOREA EDS-M-4305-2012 Matt acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-5135-2012 Polyamide 6 / Acrylonitrile- Butadiene-Styrene Copolymer Blend
GMKOREA EDS-M-4325-2012 10% Talc Filled Acrylonitrile- Butadiene-Styrene Copolymer

US-AAMA

AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

YU-JUS

JUS G.C1.079-1987 Rubber, ethylene-propylene

U.S. Air Force

AIR FORCE AF ETL 90-8-1990 ETHYLENE PROPYLENE DIENE MONOMER (EPDM) ROOFING, GUIDE SPECIFICATION FOR

FI-SFS

SFS-ISO 2580/2 E:1986 Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Part 2: Determination of properties

Defense Logistics Agency

DLA MIL-P-83800 A (2)-1984 PROPANEDIOL (METRIC) 1,2
DLA MIL-P-83800 A NOTICE 1-1998 PROPANEDIOL (METRIC) 1,2
DLA MIL-P-83800 A VALID NOTICE 2-2004 PROPANEDIOL (METRIC) 1,2
DLA MIL-P-83800 A-1983 PROPANEDIOL (METRIC) 1,2

GM Global

GMW 15572-2011 Acrylonitrile Butadiene Styrene Issue 3; English

ES-AENOR

UNE 53-380 Pt.2-1990 Pressure water conduit made of propylene. Part 2: Characteristics and test methods of propylene-ethylene copolymers
UNE 53-380 Pt.2-1991 Pressure water conduit made of propylene. Part 2: Characteristics and test methods of propylene-ethylene copolymers

SE-SIS

SIS 16 27 00-1974 Rubber type 70 (ethylene-propylene copolymer and ethylene propylene terpolymer, EPM and EPDM)

GM North America

GM GM9740P-1988 Acrylonitrile, Styrene and Butadiene Compositions in ABS Polymers

BE-NBN

NBN T 04-516-1988 Propylene and butadiene for industrial use - Sampling in the liquid phase

ES-UNE

UNE-EN ISO 19066-2:2021 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)

Others: Propylene Dimethyl Ester,Diallyl terephthalate,Polypropylene polystyrene,Propylene polystyrene,Milk Propylene,Propylene Production Method,Propylene detector,Propylene moisture detection,Moisture Detection in Propylene,Propylene triamine,Acrylonitrile-butadiene-propadiene,Acrylonitrile-Butadiene-Propylene Polycarbonate,Propylenediamine,Raman spectrum of propadiene,Propylene polystyrene,Methyl allene,Allylregestrin II,DMAP,allenyl phosphate