Propylene moisture detection

Propylene moisture detection, Total:399 items.

The international standard classification for "Propylene moisture detection" includes: Rubber , Thermoplastic materials , Plastics , Organic chemicals , food products in general , Aliphatic hydrocarbons , Plastics pipes, fittings and valves , Equipment for the chemical industry , Surface active agents , Chemicals for purification of water , Latex and raw rubber , Occupational safety. Industrial hygiene .

The Chinese standard classification for "Propylene moisture detection" includes: Synthetic rubber , Water treatment agent , Synthetic resin and plastic , Basic standards and general methods for synthetic resin and plastic , Basic organic chemicals , Food sanitation , Plastic profile , Rubber products in general , Non-metal chemical machinery equipment , Basic standard and general method for synthetic rubber , Labor sanitation .

Taiwan Provincial Standard of the People's Republic of China

CNS 11338-1985 Method of Test for Acrylonitrile-Butadiene-Styrene Sheets
CNS 13346-1994 Acrylonitrile - butadiene - Styrene (ABS) Plastic Fittings for Water Works
CNS 13475-1995 Method of Test for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Pipes and Fittings for Chemical Industrial and General Uses
CNS 11286-1985 Method of Test for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics
CNS 3276-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Water Absorption)
CNS 13345-1994 Method of Test for Rigid Acrylonitrile - Butadiene - Styrene (ABS) Compounds for Pipes and Fittings
CNS 10013-1983 Method of Test for Acrylonitrile Butadiene Rubber (NBR) Latex
CNS 2638-1984 Method of Test for Polymethyl Acrylate Resin Treated Waterproof Nylon Cloth
CNS 13347-1994 Method of Test for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Fittings for Water Works
CNS 11337-1985 Acrylonitrile-Butadiene-Styrene (ABS) Sheets
CNS 10014-1983 Method of Test for Acrylonitrial Butadiene Rubber (NBR)
CNS 7272-1987 Method of Test for Polypropylene Ropes
CNS 13158-1995 Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipes for Water Works
CNS 13159-1995 Method of Test for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipes for Water Works

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 42268-2022 Rubber，ethylene-propylene-diene(EPDM)—Evaluation procedure
GB/T 14837.1-2014 Rubber and rubber products―Determination of the composition of vulcanizates and uncured compounds by thermogravimetry―Part 1:Butadiene,ethylene-propylene copolymer and terpolymer,isobutene-isoprene,isoprene and styrene-butadiene rubbers
GB/T 18916.13-2024 Norm of water intake for industry—Part 13: Ethylene and propylene
GB/T 3727-2003 Ethylene or propylene for industrial use—Determination of trace water
GB/T 31403-2015 Plastics―Acrylonitrile-butadiene-styrene/poly(methyl methacrylate) alloy
GB/T 24797.3-2014 Film for wrapping rubber bales―Part 3:Ethylene-propylene-diene rubber(EPDM),acrylonitrilebutadiene rubber(NBR),hydrogenated nitrile-butadiene rubber(HNBR),acrylic-ethylene rubber(AEM) and acrylic rubber(ACM)
GB/T 5009.152-2003 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for foods pack
GB/T 13290-1991 Propylene and butadiene for industrial use－Sampling in the liquid phase
GB/T 13290-2014 Propylene and butadiene for industrial use―Sampling in the liquid phase
GB/T 20207.2-2006 Acrylonitrile-butadiene-styrene (ABS) pressure piping systems—Part 2:Fittings
GB/T 20207.1-2006 Acrylonitrile-butadiene-styrene (ABS) pressure piping systems - Part 1: Pipes
GB/T 12005.6-1989 Determination for hydrolysis degree of partly hydrolysis polyacrylamide
GB/T 33085-2016 Water treatment chemicals一Poly(diallyldimethyIammonium chloride)
GB/T 10009-1988 Acrylonitrile--Butadiene--Styrene (ABS) plastics extrusion plates
GB 12005.6-1989 Method for Determination of Degree of Hydrolysis of Partially Hydrolyzed Polyacrylamide
GB/T 12672-2009 Acrylonitrile-butadiene-styrene(ABS)resin
GB 12672-1990 Acrylonitrile-butadiene-styrene (ABS) resin
GB/T 17338-1998 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging

工业和信息化部

SH/T 1831-2020 Determination of free acrylonitrile content in acrylonitrile-butadiene rubber-Headspace gas chromatography
SH/T 1814-2020 Determination of vanadium content in ethylene- -propylene copolymer( EPM) and ethylene- -propylene- -diene terpolymers( EPDM)
HG/T 5360-2018 Dimethyldiallylammonium chloride for water treatment chemicals
HG/T 4948-2016 Tripropylene glycol diacrylate for photosensitive materials

Group Standards of the People's Republic of China

T/CSTM 00538-2021 Liquid acrylonitrile-butadiene rubber
T/JSBC 3-2020 Flame retardant recycled acrylonitrile-butadiene-styrene compound
T/ZZB 1674-2020 Acrylonitrile-Butadiene-Styrene（ABS） children's building block toys
T/SDEPI 019-2021 By product cis-1,3-dichloropropene from epichlorohydrin production
T/NBSL 002-2022 Flame Retardant ABS
T/SDEPI 020-2021 By product trans-1,3-dichloropropene from epichlorohydrin production
T/CPCIF 0136-2021 2-Hydroxyethyl methacrylate，Hydroxypropyl methacrylate（mixture of 2-hydroxypropyl and 2-hydroxy-1-methylethyl methacrylate）& Hydroxypropyl acrylate（mixture of 2-hydroxypropyl and 2-hydroxy-1-methylethyl acrylate）for industrial use
T/SDAS 723-2023 1,3-Dichloropropene
T/ZZB 0804-2018 Co-polypropylene plastic inspection well for urban and rural drainage-well seat
T/GDPIA 39-2021 Paint-free acrylonitrile-butadiene-styrene (ABS) material
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/SDEPI 021-2021 By product 2,3-dichloropropene from epichlorohydrin production
T/HEBQIA 121-2022 1,3-Dichloropropene
T/CSTM 00539-2021 Liquid random acrylonitrile-butadiene rubber
T/SDHCIA 021-2022 Mixted solution of acrylic acid dimer and acrylic acid

Professional Standard - Chemical Industry

HG/T 2429-2014 Water treatment chemicals. Acrylic acid-Acrylates copolymer
HG/T 2737-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) ball valve
HG/T 21561-1994 The ABS pipes and fittings series
HG/T 2429-2006 Water treatment chemicals - Acrylic acid - Acrylates copolymer
HG/T 2643-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) diaphragm valve
HG/T 21561-1994（编制说明） Acrylonitrile Butadiene Styrene (ABS) Pipe and Fittings
HG/T 2429-1993 Water treatment agent acrylic acid-acrylic ester copolymer
HG/T 4947~4948-2016 Cosmetic ingredients-Lauryl phosphate

Professional Standard - Petrochemical Industry

SH/T 1157.2-2015 Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile. butadiene rubber(NBR). Part 2: Kjeldahl method
SH/T 1157.1-2012 Rubber, raw-Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) -Part 1 : Combustion (Dumas)method
SH/T 1159-2010 Acrylonitrile-butadiene rubber（NBR）——Determination of the swelling ratio
SH 2604.04-2003 Water treatment chemicals - Polyacrylic acid/sodium polyacrylate
SH/T 1548-2004 1-Butene for industrial use -- Determination of trace propadience and propyne -- Gas chromatographic method
SH/T 1841-2023 Rubber, ethylene-propylene-diene (EPDM)
SH/T 1743-2004 Rubber, ethylene-propylene-diene (EPDM)-Evaluation procedure
SH/T 1611-2004 Acrylonitrile-butadiene rubber (NBR) -- Evaluation procedure
SH/T 1743-2011 Rubber ethylene-propylene-diene(EPDM)—Evaluation procedure
SH 2604.06-2003 Water treatment chemicals - Acrylic acid - acrylate series copolymer
SH/T 1504-1992 Acrylonitrile-butadiene-styrene (ABS) molding and extrusion materials classification nomenclature
SH/T 1751-2005 Determination of ethylene units in ethylene-propylene copolymer (EPM) and ethylene-propylene-diene terpolymers (EPDM)

Professional Standard - Recommended Standards for Engineering Construction

CECS 270-2010 Technical specification for ABS plastical pipeline of water supply and drainage engineering

Professional Standard - Agriculture

SN/T 5581-2023 Determination of composition of monomer in recycledacrylonitrile-butadiene-styrene copolymer - Elemental analyzer
2257药典二部-2010 Part II Seventeen Drawings Acrylic IV
549兽药典一部-2015 The second part of the main text variety five-paint ethyl acrylate-methyl methacrylate copolymer aqueous dispersion
水和废水监测分析方法 4.4.12-2003 Part Four Organic Pollutants Chapter Four Determination of Specific Organic Compounds Dodecacrylonitrile and Acrolein
JJF 2113-2024 Calibration specifications for acrylonitrile gas detectors
SL 748-2017 Determination of acrolein, acrylonitrile and acetaldehyde in water by purge and trap-gas chromatography
JAP-049 Dichloroisopropyl ether detection method
水产品质量安全检验手册 2.14.0.0-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products Section 14 Determination of Eicosapentaenoic Acid and Docosahexaenoic Acid in Aquatic Products (GBT 5009.168-2003)
2256药典二部-2010 Part Two Seventeen Paintings Acrylic III
2255药典二部-2010 Part Two Seventeen Drawings Acrylic II

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 36089-2018 Acrylonitrile-butadiene rubber(NBR)
GB/T 34685-2017 Acrylonitrile-butadiene rubber(NBR)-Evaluation procedure

国家能源局

SH/T 1814-2017 Determination of vanadium in ethylene-propylene copolymer (EPM) and ethylene-propylene-diene terpolymer (EPDM) spectrophotometrically

中华人民共和国国家卫生和计划生育委员会

GBZ/T 300.80-2017 Determination of toxic substances in workplace air—Part 80: Allyl chloride and dichloropropylene

未注明发布机构

ASTM RR-D11-1065 1993 D3900-Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
DIN EN ISO 19062-2 E:2018-03 Plastics Acrylonitrile Butadiene Styrene (Draft)
DIN EN ISO 19066-2 E:2019-04 Plastic Methyl Methacrylate Acrylonitrile Butadiene Styrene (Draft)
ASTM RR-F17-1025 1984 D2680-Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM RR-D11-1021 1982 D3900-Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)

Professional Standard - Commodity Inspection

SN/T 3470.2-2013 Rubber||raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR). Part 2:Kjeldahl method
SN/T 3470.1-2013 Rubber||raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR). Part 1:Combustion method
SN/T 2844-2011 Determination of Acylamide in Textiles

Professional Standard - Light Industry

QB/T 2894-2007 Acrylonitrile-butadiene-styrene(ABS) color masterbatch
QB/T 2029-1994 ABS/PVC Sheet Material

Military Standard of the People's Republic of China-General Armament Department

GJB 2050-1994 Specification for carboxyl-terminated polybutadiene acrylonitrile
GJB 2050A-2020 Specification for carboxyl-terminated polybutadiene acrylonitrile

Professional Standard - Environmental Protection

HJ 806-2016 Water quality - Determination of acrylonitrile and acrolein - Purge and trap/gas chromatography

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1456-2014 Acrylic and polybutadiene anodic electrocoats

Professional Standard - Water Conservancy

SL/T 748-2017 Water quality – Determination of acrolein, acrylonitrile and acetaldehyde-Purge and trap/gas chromatography

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40006.5-2021 Plastics—Recycled plastics—Part 5：Acrylonitrile-butadiene-styrene (ABS) materials

Association Francaise de Normalisation

NF T20-803:1976 Propylene. Determination of the propene and propadine. Gas phase chromatographic method.
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF T20-816*NF ISO 8174:1987 Ethylene and propylene for industrial use. Determination of acetone, acetonitrile, propan-2-ol and methanol. Gas chromatographic method.
NF T20-801:1973 Chemical analysis of propylene. Determination of water traces.
NF T94-403:1998 Chemicals used for treatment of water intended for human consumption. Poly(diallyldimethylammonium chloride).
NF T94-403*NF EN 1408:2008 Chemicals used for treatment of water intended for human consumption - Poly(diallyldimethylammonium chloride).
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T20-818*NF ISO 8563:1987 Propylene and butadiene for industrial use. Sampling in the liquid phase.
NF ISO 8563:1987 Propylène et butadiene à usage industriel - Échantillonnage en phase liquide
NF T54-024-3*NF EN ISO 2507-3:2017 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3 : test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
NF T53-038-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T53-038-2*NF EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF EN 1408:2008 Chemicals used for the treatment of water intended for human consumption - Poly(dimethyldiallylammonium chloride)
NF EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) materials for molding and extrusion - Part 2: preparation of specimens and determination of properties

ZA-SANS

CKS 489-1977 EPDM-styrene rubber sheet (for waterproofing)

Society of Automotive Engineers (SAE)

SAE AMS3217/2B-2004 Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
SAE AMS3217/2D-2020 Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
SAE AMS3217/1B-2013 Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
SAE AMS3217/1C-2019 Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
SAE AMS3217/2B-1998 Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
SAE AMS3217/1B-1998 Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
SAE AMS3260B-1990 Ethylene-Propylene-Diene (EPDM) Rubber, General Purpose, 45-55
SAE AMS3260C-2009 Ethylene-Propylene-Diene (EPDM) Rubber, General Purpose, 45-55
SAE AMS3249C-1993 Ethylene Propylene (EPDM) Rubber Hydrazine-Base-Fluid Resistant 75 - 85
SAE AMS3201K-1998 Butadiene Acrylonitrile (NBR) Rubber, Dry Heat Resistant, 35-45

British Standards Institution (BSI)

BS EN 1408:2008 Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)
BS ISO 20299-3:2008 Film for wrapping rubber bales - Ethylene-propylene-diene rubber (EPDM), acrylonitrile- butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS ISO 4097:2007 Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure
BS ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
BS ISO 16565:2013 Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylenepropylene-diene (EPDM) terpolymers
BS ISO 24698-1:2008 Rubber, raw - Determination of bound Acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Combustion (Dumas) method
BS ISO 24698-2:2008 Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Kjeldahl method
BS 5391-1:2006(2011) Acrylonitrile - butadiene - styrene (ABS) pressure pipe – Part 1 : Specification
BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
BS EN 2104:1996(1999) Acrylonitrile - butadiene rubber (NBR) — Hardness 40 IRHD
BS ISO 24048:2022 Plastics. Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
BS 5391-1:2006 Acrylonitrile-butadiene-styrene (ABS) pressure pipe - Specification
BS ISO 16152:2005 Plastics - Determination of xylene-soluble matter in polypropylene
BS ISO 4658:2020 Acrylonitrile-butadiene rubber (NBR). Evaluation procedure
BS ISO 8563:2023 Propylene and butadiene for industrial use. Sampling in the liquid phase
BS EN ISO 10366-2:2003(2004) Plastics — Methyl methacrylate - acrylonitrile - butadiene - styrene (MABS) moulding and extrusion materials — Part 2 : Preparation of test specimens and determination of properties
BS ISO 4658:2000 Acrylonitrile-butadiene rubber (NBR) - Evaluation procedure
BS ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR) - Evaluation procedure
BS EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 19066-2:2020 Plastics. Methyl methacrylate-acrylonitrile-butadienestyrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 2507-3:2017 Thermoplastics pipes and fittings. Vicat softening temperature.Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
BS ISO 16152:2022 Plastics. Determination of xylene-soluble matter in polypropylene

BR-ABNT

ABNT EB-631-1979 Ethylene propylene glycol

FI-SFS

SFS-ISO 2580/2 E:1986 Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Part 2: Determination of properties

International Organization for Standardization (ISO)

ISO 20299-3:2008 Film for wrapping rubber bales - Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 24698-2:2008 Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Part 2: Kjeldahl method
ISO 8174:1986 Ethylene and propylene for industrial use; Determination of acetone, acetonitrile, propan-2-ol and methanol; Gas chromatographic method
ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 4097:2007 Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure
ISO 24698-1:2008 Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Part 1: Combustion (Dumas) method
ISO 24698-1:2018 Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Part 1: Combustion (Dumas) method
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 16565:2002 Rubber - Determination of 5-ethylidenenorbonene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
ISO 2580-2:1982 Plastics; Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials; Part 2 : Determination of properties
ISO 4097:2020 Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure
ISO 16565:2013 Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
ISO 24048:2022 Plastics — Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 16565:2008 Rubber - Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 8563:1987 Propylene and butadiene for industrial use; Sampling in the liquid phase
ISO 4658:2020 Acrylonitrile-butadiene rubber (NBR) — Evaluation procedure
ISO 16152:2005 Plastics - Determination of xylene-soluble matter in polypropylene
ISO 8563:2023 Propylene and butadiene for industrial use — Sampling in the liquid phase
ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR) - Evaluation procedure
ISO/PRF 8563 Propylene and butadiene for industrial use — Sampling in the liquid phase
ISO 4658:1990 Rubber, acrylonitrile-butadiene (NBR); evaluation procedure
ISO 10366-2:2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 10366-2:1994 Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 2507-3:1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
ISO 16152:2022 Plastics — Determination of xylene-soluble matter in polypropylene
ISO 19066-2:2020 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 9924-1:2000 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 9924-1:2016 Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 4097:1991 Rubber, ethylene-propylene-diene (EPDM); general purpose types; evaluation procedure

GSO

GSO ISO 8174:2008 Ethylene and propylene for industrial use - Determination of acetone, acetonitrile, propan-2-ol and methanol - Gas chromatographic method
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 16565:2014 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
BH GSO ISO 16565:2016 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
GSO ISO 16565:2014 Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
GSO ISO 8563:2008 Propylene and butadiene for industrial use - Sampling in the liquid phase
OS GSO ISO 8563:2008 Propylene and butadiene for industrial use - Sampling in the liquid phase
OS GSO ISO 10366-2:2013 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
BH GSO ISO 10366-2:2016 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
OS GSO ISO 8361-3:2008 Thermoplastics pipes and fittings – water absorption – Part 3: Test conditions for acrylonitrile / butadiene/styrene(ABS) pipes and fittings
OS GSO ISO 16152:2013 Plastics - Determination of xylene-soluble matter in polypropylene
GSO ISO 8361-3:2008 Thermoplastics pipes and fittings – water absorption – Part 3: Test conditions for acrylonitrile / butadiene/styrene(ABS) pipes and fittings
GSO ISO 10366-2:2013 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
GSO ISO 2507-3:2013 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

SAE - SAE International

SAE AMS3217/2-1983 Test Slabs@ Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile@ 65 - 75
SAE AMS3217/2C-2012 Test Slabs@ Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile@ 65 - 75
SAE AMS3217/2A-1993 Test Slabs@ Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile@ 65 - 75
SAE AMS3217/1A-1993 Test Slabs@ Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile@ 65 - 75
SAE AMS3217/1-1983 TEST SLABS@ ACRYLONITRILE BUTADIENE (NBR-H) High Acrylonitrile@ 65 – 75

RU-GOST R

GOST 24975.5-1991 Ethylene and propylene. Methods of water determination

SCC

DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
CSA B181.1-1973 Acrylonitrile-butadiene-styrene (ABS-DWV) drain, waste and vent pipes and fittings
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
07/30161577 DC BS ISO 20299-3. Film for wrapping rubber bales. Part 3. Ethylene-propylene-diene rubber (EPDM), acrylonitrile- butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
AWWA B451-2023 Poly(Diallyldimethylammonium Chloride)
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
HOLDEN HN 1259-2007 ACRYLONITRILE BUTADIENE STYRENE (ABS) COMPOUNDS
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
AWWA B451-2016 Poly(Diallyldimethylammonium Chloride)
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
BS ISO 16565:2002 Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
HOLDEN HN 1259-2012 Acrylonitrile Butadiene Styrene ABS Compounds
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
BS ISO 16565:2008 Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
06/30150431 DC ISO 4097. Rubber, ethylene-propylene-diene (EPDM) Evaluation procedure
07/30162094 DC BS ISO 24698-2. Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR). Part 2. Kjedahl method
12/30263490 DC BS ISO 16565. Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
DANSK DS/ISO 19066-2:2020 Plastics – Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DANSK DS/EN ISO 10366-2:2004 Plastics – Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
BS EN ISO 10366-2:2003 Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials-Preparation of test specimens and determination of properties
AWWA MTC69767 Nanofouling of Polypropylene Microfiltration Membranes by Clarified Secondary Effluent
NS 3062:1974 Pipes and fittings of acrylonitrile-butadiene-styrene for soil and waste water - Dimensions and quality requirements
HOLDEN HN 2411-2012 Acrylonitrile Butadiene Styrene ABS and Polyamide 6 Alloys
HOLDEN HN 2411-2004 ACRYLONITRILE BUTADIENE STYRENE (ABS) AND POLYAMIDE 6 ALLOYS
DANSK DS/EN 1408:2008 Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)
NS-EN 1408:1998 Chemicals used for treatment of water intended for human consumption — Poly(diallydimethylammonium chloride)

Japanese Industrial Standards Committee (JISC)

JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6873:1975 Acrylonitrile-butadiene-styrene (ABS) sheets
JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS K 6874:1995 Testing methods for ABS resins
JIS K 6918:1995 Diallyl phthalate molding compounds
JIS K 6938-2:1999 Plastics -- Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6938-2:2007 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6226-1:2003 Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers

Korean Agency for Technology and Standards (KATS)

KS M 3368-2015 High impact acrylonitrile-butadiene-styrene(ABS) fitting for water works service
KS M ISO 20299-3:2012 Film for wrapping rubber bales-Part 3:Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
KS M 3368-2012 High impact acrylonitrile-butadiene-styrene(ABS) fitting for water works service
KS M 3347-1986 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3351-1982 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3351-2002 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-2016(2021) Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3347-2022 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3351-1979(1997) ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-2011 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3368-2015(2020) High impact acrylonitrile-butadiene-styrene(ABS) fitting for water works service
KS M ISO 8174:2007 Ethylene and propylene for industrial use－Determination of acetone, acetonitrile, propan－2－ol and methanol－Gas chromatographic method
KS M 3347-2016 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 1962-2002 Ethylene and propylene for industrial use-Determination of traces of carbon monoxide and carbon dioxide-Gas chromatographic method
KS M 3368-2020 High impact acrylonitrile-butadiene-styrene(ABS) fitting for water works service
KS M 3368-1994 High impact acrylonitrile-butadiene-styrene(ABS) Fitting for water works service
KS M ISO 8174:2017 Ethylene and propylene for industrial use — Determination of acetone, acetonitrile, propan-2-ol and methanol — Gas chromatographic method
KS M ISO 24698-1:2010 Rubber, raw－Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR)－Part 1：Combustion(Dumas) method
KS M ISO 4097:2021 Rubber, ethylene-propylene-diene(EPDM) — Evaluation procedure
KS M ISO 16565-2022 Rubber — Determination of 5-ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene-propylene-diene(EPDM) terpolymers
KS M 3356-2016 Diallyl phthalate molding compounds
KS M 3356-2021 Diallyl phthalate molding compounds
KS M ISO 24698-2:2010 Rubber, raw－Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR)－Part 2：Kjeldahl method
KS M ISO 24698-1:2021 Rubber, raw — Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) —Part 1: Combustion (Dumas) method
KS M ISO 16565:2007 Rubber－Determination of 5－ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene－propylene－diene(EPDM) terpolymers
KS M ISO 16565:2017 Rubber — Determination of 5-ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene-propylene-diene(EPDM) terpolymers
KS M 3356-1981 Diallyl phthalate molding compounds
KS M ISO 8563:2013 Propylene and butadiene for industrial use－Sampling in the liquid phase
KS M ISO 4658:2011 Acrylonitrile-butadiene rubber(NBR)-Evaluation procedure
KS M ISO 16152:2006 Plastics－Determination of xylene-soluble matter in polypropylene
KS M ISO 8563:2002 Propylene and butadiene for industrial use-Sampling in the liquid phase
KS M ISO 4658:2016 Acrylonitrile-butadiene rubber(NBR)－Evaluation procedure
KS M ISO 4658:2022 Acrylonitrile-butadiene rubber(NBR) — Evaluation procedure
KS M ISO 10366-2:2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 16152-2021 Plastics－Determination of xylene-soluble matter in polypropylene
KS M ISO 16152-2006(2021) Plastics－Determination of xylene-soluble matter in polypropylene
KS M ISO 10366-2:2006 Plastics-Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 16152-2006(2016) Plastics－Determination of xylene-soluble matter in polypropylene
KS M ISO 16565-2017(2022) Rubber — Determination of 5-ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene-propylene-diene(EPDM) terpolymers
KS M ISO 10366-2-2016(2021) Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M 3356-2016(2021) Diallyl phthalate molding compounds
KS M ISO 8563-2002(2012) Propylene and butadiene for industrial use－Sampling in the liquid phase
KS M ISO 10366-2-2021 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties

German Institute for Standardization

DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN 1408:2008 Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride); English version of DIN EN 1408:2008-04
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN 54217:1975 Testing of textiles; quantitative analysis of binary mixtures, acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres, dimethyl formamide method
DIN EN ISO 19066-2:2020-07 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020); German version EN ISO 19066-2:2020
DIN EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003); German version EN ISO 10366-2:2003
DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DIN EN 1408:2023 Chemicals used for treatment of water intended for human consumption - Poly(diallyldimethylammonium chloride)

PL-PKN

PN C04627-02-1991 Water and waste water Tests for acrylonitryle Determination of acrylonitryle with mercaptoethanol method

American Society for Testing and Materials (ASTM)

ASTM D2751-77ae1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe And Fittings
ASTM D2751-96a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
ASTM D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
ASTM D2680-20 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D2680-01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D2235-04(2016) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
ASTM D2680-95a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D2661-24 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2235-22 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
ASTM D2661-78 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Drain, Waste, And Vent Pipe And Fittings
ASTM D3900-95(2004)e1 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
ASTM D3900-95(2000) Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers)
ASTM UOP1014-17 Determination of Trace Propadiene and Methyl Acetylene Impurities in Polymer Grade Propylene by Gas Chromatography
ASTM D2993-98 Standard Specification for Acrylonitrile-Butadiene Rubberized Tar
ASTM F2806-23 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ASTM F628-91 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core
ASTM F628-79e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Drain, Waste, And Vent Pipe Having A Foam Core
ASTM D2661-08 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D4415-91(2000)e1 Standard Test Methods for Determination of Dimer in Acrylic Acid
ASTM D2661-02 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

GM Europe

GME QK 001244-1998 Acrylnitril-Butadien-Styrol-Terpolymerisat Methylmethacrylate-Acrylonitrile-Butadiene-Styrene-Polymer English Translation Available
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME QK 000974-2008 Polypropylene/ethylene propylene diene rubber blend.English/Germany
GME QK 002500-2006 Reinforced blend of acrylonitrile-butadiene-styrene copolymer (ABS) and acrylic-styrene-acrylonitrile (ASA) English/German
GME QK 001952-2003 ABS ABS English/German
GME QK 001956-2003 ABS ABS English/German

European Committee for Standardization (CEN)

EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN 2104:1996 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD
EN 1408:1998 Chemicals Used for Treatment of Water Intended for Human Consumption - Poly(Diallyldimethylammonium Chloride)
EN 1408:2008 Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)
EN 1408:2023 Chemicals used for treatment of water intended for human consumption - Poly(diallyldimethylammonium chloride)

TH-TISI

TIS 655.3-2011 Plastic utensils for food.part 3: acrylonitrile-butadiene-styrene and styrene.acrylonitrile
TIS 2357-2007 Acrylonitrile.butadiene.styrene (abs) pressure pipe

RO-ASRO

STAS 11557-1982 RUBBER Test recipe for testing rubber acrylonil rile-butadiene
STAS 10024-1975 ACRYLONITRILE- BUTADIENE - STYRENE COPOLYMER
STAS 8722-1970 PROPANE-PROPYLENE FRACTION

US-FCR

FCR VA 07 53 23-2011 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING
FCR UFGS-07 53 23-2012 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING
FCR AF ETL 90-8-1990 ETHYLENE PROPYLENE DIENE MONOMER (EPDM) ROOFING, GUIDE SPECIFICATION FOR

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN 1408-2008 Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)

Danish Standards Foundation

DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN 1408:2008 Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)

CEN - European Committee for Standardization

EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 2507-3:2017 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/ butadiene/styrene (ABS) and acrylonitrile/styrene/ acrylic ester (ASA) pipes and fittings

AENOR

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
UNE-EN 1408:2008 Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)

American Water Works Association (AWWA)

ANSI/AWWA B451-23 Poly(Diallyldimethylammonium Chloride)
AWWA B451-1998 Poly(Diallyldimethylammonium Chloride)
AWWA B451-2010 Poly(Diallyldimethyl-ammonium Chloride)

KR-KS

KS M ISO 4097-2021 Rubber, ethylene-propylene-diene(EPDM) — Evaluation procedure
KS M ISO 16565-2017 Rubber — Determination of 5-ethylidenenorbornene(ENB) or dicyclopentadiene(DCPD) in ethylene-propylene-diene(EPDM) terpolymers
KS M ISO 24698-1-2021 Rubber, raw — Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) —Part 1: Combustion (Dumas) method
KS M ISO 4658-2022 Acrylonitrile-butadiene rubber(NBR) — Evaluation procedure
KS M ISO 10366-2-2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties

American National Standards Institute （ANSI)

ANSI/AWWA B451-2016 Poly(Diallyldimethylammonium Chloride)
ANSI/ASTM D2751:2005 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
ANSI/ASTM D5492:1998 Test Method for Determination of Xylene Solubles in Propylene Plastics
ANSI/AWWA B451-2023 Standard for Poly (Diallyldimethylammonium Chloride)
ANSI/ASTM F628:2012 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core

IT-UNI

UNI 7041-1972 Acrylonitrile. Butadiene. Styrene (ABS) thermoplastic material. Classification
UNI 7702-1977 Elastic material. Raw materials and ingredients. Butadiene, acrylonitrile rubber (NBR). Preparation and vulcanization of mixtures for evaluation of test methods

GM North America

GM GM9740P-1988 Acrylonitrile, Styrene and Butadiene Compositions in ABS Polymers
GM 9984026-1988 Acrylic Enamels - Waterborne

AT-ON

ONORM B 5179/A1-2000 Pipes and fittings of acrylnitrile-butadien-styrene (ABS) or acrylester-styrene-acryl-nitrile (ASA) with sockets for hot water resistant waste and soil installations inside buildings - Dimensions, technical terms of delivery, tests and marking of conformi

US-AAMA

AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

GM Daewoo

GMKOREA EDS-M-4315-2012 Blow molding acrylonitrile-butadiene-styrene copolymer
GMKOREA EDS-M-4301-2012 Heat Resistance Acrylonitrile- Butadiene-Styrene Copolymer
GMKOREA EDS-M-4309-2012 Weather Resistant Acrylonitrile-Butadiene- Stylene Copolymer
GMKOREA EDS-M-4305-2012 Matt acrylonitrile-butadiene-styrene copolymer

AASHTO - American Association of State Highway and Transportation Officials

M 264-2003 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping
M 264-1992 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping (Twentieth Edition; ASTM D2680-93)

ES-UNE

UNE-EN ISO 2507-3:2018 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
UNE-EN ISO 19066-2:2021 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)

The American Road & Transportation Builders Association

AASHTO M 264-2003 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
AASHTO M 264-2003(R2007) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping

U.S. Air Force

AIR FORCE AF ETL 90-8-1990 ETHYLENE PROPYLENE DIENE MONOMER (EPDM) ROOFING, GUIDE SPECIFICATION FOR

YU-JUS

JUS F.S3.140/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of acryllic, certain modocrylic or certain chlorofibres and certain other fibres. Dimethylformamide method. Amendments

VN-TCVN

TCVN 6147-3-2003 Thermoplastics pipes and fittings.Vicat softening temperature.Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

Others: Propylene detector,Propylene moisture detection,Moisture Detection in Propylene