Principles of phase contrast microscopy

Principles of phase contrast microscopy, Total:167 items.

The international standard classification for "Principles of phase contrast microscopy" includes: Testing of metals , Chemical analysis of metals , Optical equipment , Animal feeding stuffs , Test conditions and procedures in general , Crude petroleum , Powder metallurgy .

The Chinese standard classification for "Principles of phase contrast microscopy" includes: Magnifier and microscope , Metallographic testing method , Metal physical property test method , Metal processing property test method , Livestock and poultry feed and additive , Basic standards and general methods , Crude petroleum , Electron optics and other physical optics instrument , Powder metallurgy analysis method .

Professional Standard - Machinery

JB/T 10077-1999 Metallurgical microscope
JB/T 7398.11-1994 Microscope - Phase Contrast Device
JB/T 7398.9-1994 Microscope - Radiography Facility

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3488-1983 Hardmetals; Metallographic determination of microstructure
GB/T 32189-2015 Test method for surface roughness of GaN single crystal substrate by atomic force microscope
GB/T 22064-2008 Microscopes - Interfacing connection for 35 mm SLR photo cameras
GB/T 14145-1993 Test method for stacking fault density of epitaxial layers of silicon by interference contrast microscopy

工业和信息化部

YB/T 4928-2021 Microlithofacies analysis method of pore structure of coke and raw coal
YB/T 4676-2018 Analysis of precipitates of steel-Transmission election microscope method

National Metrological Verification Regulations of the People's Republic of China

JJG(教委) 14-1992 Metallographic Microscope Verification Regulations
JJG(教委) 012-1996 Verification regulation for metallographic microscope

National Metrological Technical Specifications of the People's Republic of China

JJF 1914-2021 Calibration Specification for Metallurgical Microscopes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33714-2017 Nanotechnology―Test method for size of nanoparticles―Atomic force microscopy
GB/T 34269-2017 Atlas of microscopic examination for feedstuff
GB/T 14698-2017 Identification method of feed material by microscopy

Professional Standard - Railway

TB/T 2787-1997 Metallographic Microscopic Examination of Locomotive Axle
TB/T 2816.2-1997 Metallographic Microscopic Examination of Vehicle and Tender Axles

Professional Standard - Petroleum

SY 0521-2008 Microscopic observation method for determination of wax precipitation point of crude oil
SY/T 0521-1993 Microscopic Observation Method for Determination of Wax Precipitation Point of Crude Oil
SY/T 0521-2008 Determination of wax appearance temperature in crude petroleum-Test method by microscopic observation

Professional Standard - Education

JY/T 012-1996 General rules for metallographic microscopy
JY/T 0585-2020 General rules of analytical methods for the metallographic microscope

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1531-2013 Technical Requirements for Phase Shift Differential Confocal Microscopy

Group Standards of the People's Republic of China

T/CSTM 00003-2019 Thickness measurements of two-dimensional materials Atomic force microscopy (AFM)
T/QGCML 1940-2023 Scanning electron microscope in-situ high temperature mechanical testing device
T/SPSTS 031-2023 Graphene Material Surface Potential Measurement Atomic Force Microscopy

Taiwan Provincial Standard of the People's Republic of China

CNS 11020-1984 Method for Microscopical Determination of Volume Percent of Petrographic Components of Coal
CNS 12998-1992 Method of Determination for Microstructure of Hardmetals (Metallographic Method)

未注明发布机构

JIS B 7253-3:2024 Microscopes -- Definition and measurement of illumination properties -- Part 3: Incident light fluorescence microscopy with incoherent light sources
DIN EN ISO 643 E:2015-06 Photomicrographic determination of apparent grain size of steel (draft)
DIN EN ISO 20705 E:2018-10 General principles for quantitative microanalytical testing of textiles (draft)

Professional Standard - Agriculture

GB/T 14698-2017(XG1-2019) Microscopic inspection method of feed raw materials "No. 1 Amendment"

未注明发布机构

JIS B 7253-3:2024 Microscopes -- Definition and measurement of illumination properties -- Part 3: Incident light fluorescence microscopy with incoherent light sources
DIN EN ISO 20705 E:2018-10 General principles for quantitative microanalytical testing of textiles (draft)
DIN EN ISO 643 E:2015-06 Photomicrographic determination of apparent grain size of steel (draft)

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 3488.3-2021 Hardmetals—Metallographic determination of microstructure—Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals

Standard Association of Australia （SAA）

AS 2856.3:2000(R2013) Coal Petrography Microscopic Coal Microscopic Reflectivity Microscopic Determination Method
AS 2856.2:1998(R2013) Coal petrography microscopic analysis
AS 2856.1:2000(R2013) Preparation of coal samples for incident light microscopy of coal petrography

CU-NC

NC 05-06-1986 Metallography. Microphotograph Images Scale

American Society for Testing and Materials (ASTM)

ASTM E2382-04(2020) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
ASTM E2382-04 Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
ASTM E2382-04(2012) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
ASTM E1967-11 Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM E1967-11a Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM E1967-98(2003) Standard Test Method for the Automated Determinaton of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM E1967-19 Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM D7201-06(2011) Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
ASTM D6057-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ASTM E1967-98 Standard Test Method for the Automated Determinaton of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM E883-11(2024) Standard Guide for Reflected–Light Photomicrography

German Institute for Standardization

DIN 28071:1986 Furnaces with lining for the chemical industry; instructions for brick-lining
DIN EN ISO 4499-1:2020-11 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020); German version EN ISO 4499-1:2020
DIN EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003
DIN EN ISO 20705:2020-05 Textiles - Quantitative microscopical analysis - General principles of testing (ISO 20705:2019); German version EN ISO 20705:2020
DIN 22021:1985 Investigations of the raw material in hard-coal-mining; microscopical examinations of rocks
DIN SPEC 91284:2012 Principles of microscopic evacuation analyses

CZ-CSN

CSN 01 3806-1979 Technical targets for micrography
CSN 42 0460-1983 Metallographic pictures, enlargement, dimensions and designation
CSN 44 1344-1975 Micropetrographical analysis of lignites
CSN 42 0704-1964 Metalographical enlargement, laigenew and designation
CSN 19 6791-1990 Reprography. Micrographic film spools
CSN 01 3364-1986 Graphical symbols for electrical diagrams. Display elements

Danish Standards Foundation

DS/ISO 4087:1980 Microfilming of newspapers on 35 mm unperforated microfilm for archival purposes
DS/EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description
DS/EN 24499:1994 Hardmetals. Metallographic determination of microstructure

Association for Information and Image Management (AIIM)

AIIM 10197-1993 Micrographics - Readers - Printers for transparent microforms - Characteristics
AIIM 7565-1993 Micrographics - Readers for transparent microforms - Measurement of characteristics
AIIM 6198-1993 Micrographics - Readers for transparent microforms - Performance characteristics
AIIM 10198-1994 Micrographics - Rotary camera for 16mm microfilm - Mechanical and optical characteristics

British Standards Institution (BSI)

BS EN ISO 4499-1:2020 Hardmetals. Metallographic determination of microstructure - Photomicrographs and description
BS EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Photomicrographs and description
BS ISO 7404-4:2016 Methods for the petrographic analysis of coals. Method of determining microlithotype, carbominerite and minerite composition
BS ISO 7404-4:2017 Methods for the petrographic analysis of coals. Method of determining microlithotype, carbominerite and minerite composition
BS 4490:1989 Methods for micrographic determination of the grain size of steel
BS EN ISO 643:2012 Steels. Micrographic determination of the apparent grain size
BS ISO 23729:2022 Surface chemical analysis. Atomic force microscopy. Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
21/30412880 DC BS ISO 23729. Surface chemical analysis. Atomic force microscopy. Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
18/30369645 DC BS EN ISO 4499-1. Hardmetals. Metallographic determination of microstructure. Part 1. Photomicrographs and description
BS EN ISO 20705:2020 Textiles. Quantitative microscopical analysis. General principles of testing
BS ISO 19056-2:2019 Microscopes. Definition and measurement of illumination properties - Illumination properties related to the colour in bright field microscopy
BS ISO 19056-3:2022 Microscopes. Definition and measurement of illumination properties - Incident light fluorescence microscopy with incoherent light sources
BS ISO 10198:1994(2000) Micrographics — Rotary camera for 16 mm microfilm — Mechanical and optical characteristics

CH-SNV

VSM 10851-1943 drawing. Display principle

American National Standards Institute （ANSI)

ANSI/ASTM D6057:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ANSI/AIIM MS32-1996 Microrecording of Engineering Source Documents on 35-mm Microfilm

IN-BIS

IS 4381-1967 Specifications for pathological microscopy

GOST

GOST 13.1.101-1979 Reprography. Terms and definitions

Korean Agency for Technology and Standards (KATS)

KS D ISO 5949:2002 Tool steels and bearing steels-Micrographic method for assessing the distribution of carbides using reference photomicrographs
KS D ISO 5949:2013 Tool steels and bearing steels－Micrographic method for assessing the distribution of carbides using reference photomicrographs
KS D ISO 4499-1:2009 Hardmetals-Metallographic determination of microstructure-Part 1:Photomicrographs and description
KS D ISO 4499-1-2009(2019) Hardmetals－Metallographic determination of microstructure－Part 1：Photomicrographs and description
KS D ISO 4499-1-2019 Hardmetals－Metallographic determination of microstructure－Part 1：Photomicrographs and description
KS X ISO 6196-6-2007(2012) Mircrographics－Vocabulary－Part 6：Equipment
KS X 5912-2020 Density of silver-gelatin type microfilms for micrographics
KS I ISO 8672-2006(2017) Air quality－Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy(Membrane filter method)
KS I ISO 8672:2021 Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy —Membrane filter method
KS X ISO TR 12031-2013 Micrographics－Inspection of silver-gelatin microforms for evidence of deterioration

European Committee for Standardization (CEN)

EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size
EN ISO 4499-1:2020 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)
prEN 24499-1992 Hardmetals; metallographic determination of microstructure (ISO 4499:1978)
EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2008)
EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size ISO 643: 2003
EN ISO 20705:2020 Textiles - Quantitative microscopical analysis - General principles of testing (ISO 20705:2019)

PT-IPQ

NP 303-1963 Microcopies. Terminologie et déíinitions

Association Francaise de Normalisation

NF EN ISO 6428:2003 Technical Drawings – Requirements for Micrography
NF A95-186-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1 : photomicrographs and description.
NF A05-150:1985 Steel products. Techniques of micrographic examination.
NF EN ISO 4499-1:2020 Hard metals - Metallographic determination of the microstructure - Part 1: photomicrographic images and description
NF A04-102:2003 Steels - Micrographic determination of the apparent grain size.
NF A04-102:2013 Steels - Micrographic determination of the apparent grain size
NF A95-442:1993 Hardmetals. Metallographic determination of microstructure.
NF EN ISO 20705:2020 Textiles - Analyse quantitative par microscopie - Principes généraux des essais
NF G06-008*NF EN ISO 20705:2020 Textiles - Quantitative microscopical analysis - General principles of testing

GSO

OS GSO ISO 4499-1:2016 Hardmetals -- Metallographic determination of microstructure -- Part 1: Photomicrographs and description
GSO ISO 13095:2015 Surface Chemical Analysis -- Atomic force microscopy -- Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
GSO ISO 8038:2015 Microscopes -- Screw threads for objectives and related nosepieces
BH GSO ISO 8038:2016 Microscopes -- Screw threads for objectives and related nosepieces
GSO ISO 10198:2015 Micrographics -- Rotary camera for 16 mm microfilm -- Mechanical and optical characteristics
BH GSO ISO 10198:2017 Micrographics -- Rotary camera for 16 mm microfilm -- Mechanical and optical characteristics
OS GSO ISO 10198:2015 Micrographics -- Rotary camera for 16 mm microfilm -- Mechanical and optical characteristics

International Organization for Standardization (ISO)

ISO 4499-1:2020 Hardmetals — Metallographic determination of microstructure — Part 1: Photomicrographs and description
ISO 4499-1:2008 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description
ISO 23729:2022 Surface chemical analysis — Atomic force microscopy — Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
ISO 8038:2011 Microscopes — Screw threads for objectives and related nosepieces
ISO 4499:1978 Hardmetals; Metallographic determination of microstructure
ISO 7404-4:1988 Methods for the petrographic analysis of bituminous coal and anthracite; part 4: method of determining microlithotype, carbominerite and minerite composition
ISO 20705:2019 Textiles — Quantitative microscopical analysis — General principles of testing
ISO 19056-3:2022 Microscopes — Definition and measurement of illumination properties — Part 3: Incident light fluorescence microscopy with incoherent light sources

VE-FONDONORMA

NORVEN 84-1-1963 Microscope related terms and definitions

RU-GOST R

GOST 13.1.302-1987 Reprography. Micrography. Vesicular film. General specifications
GOST R ISO 643-2015 Steels. Micrographic determination of the apparent grain size
GOST R ISO 643-2011 Steels. Micrographic determination of the apparent grain size
GOST 13.1.403-1975 Reprography. Micrography. Microcopying equipment. Types
GOST R 13.1.107-2005 Reprography. Micrography. Microforms of archival documents. General specifications
GOST 13.1.103-1985 Reprography. Micrography. Image scales
GOST 13.1.301-1986 Reprography. Micrography. Silver-gelatin films. Specifications
GOST 4.360-1985 Product-quality index system. Reprography. Micrography. Microfilm cameras. Index nomeclature
GOST 5640-1968 Steel. Metallographic method for determination of microstructure of sheets and bands
GOST 4.338-1985 Product-quality index system. Reprography. Micrography. Microcopying equipment. Nomenclature of indices

YU-JUS

JUS C.A3.031-1986 Metaltographic determlnation of microstructure of hardtmtals

ESDU - Engineering Sciences Data Unit

SPB-M6-3-2010 Apr.08: Atomic Force Microscopy (background to technique)
SPB-M14-1-2010 Sept.10: Interactions and rheological properties of Asphaltenes studied by Atomic Force Microscopy

IET - Institution of Engineering and Technology

PRINC MICROW CIRC-1987 Principles of Microwave Circuits
PRINC MICROW MEAS-1993 Principles of Microwave Measurements

SCC

NS-ISO 4499:1978 Hardmetals — Metallographic determination of microstructure
NS-EN ISO 4499-1:2010 Hardmetals — Metallographic determination of microstructure — Part 1: Photomicrographs and description (ISO 4499-1:2008)
AWWA DSS91029 The Mechanics of Cement Mortar Lining in Place
BS EN 24499:1993 Specification for hardmetals. Metallographic determination of microstructure
AWWA MTC93001 Microfiltration Principles and Applications
NS-EN ISO 4499-1:2020 Hardmetals — Metallographic determination of microstructure — Part 1: Photomicrographs and description (ISO 4499-1:2020)
DANSK DS/ISO 20705:2020 Textiles – Quantitative microscopical analysis – General principles of testing
VDI 2731 BLATT 1-2009 Micro gears — basics
AENOR UNE 1030:1951 Photomicrographs. Metallography. Mineralogy. Petrography. Magnifications and formats.
VDI 3866 BLATT 4-2002 Determination of asbestos in technical products — phase contrast microscopic method

KR-KS

KS I ISO 8672-2021 Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy —Membrane filter method

IT-UNI

UNI 6500-1969 Anodic oxidation lining of aluminum and its alloys. Measuring lining thickness by optical microscope
UNI 7604-1976 Examination with electron microscope of metallic materials by the replica technique. Preparation of replicas for microfractography examination.

PL-PKN

PN-EN ISO 4499-1-2021-02 E Hardmetals -- Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)

ES-UNE

UNE-EN ISO 20705:2021 Textiles - Quantitative microscopical analysis - General principles of testing (ISO 20705:2019)

ZA-SANS

SANS 5949:2005 Tool steels and bearing steels - Micrographic method for assessing the distribution of carbides using reference photomicrographs

Association of German Mechanical Engineers

VDI/VDE 3699 Blatt 2-2014 Process control using display screens - Principles
VDI/VDE 3699 Blatt 2-2005 Process control using display screens - Principles

GOSTR

GOST 5640-2020 Steel. Metallographic method for determination of microstructure of flat rolled product

NL-NEN

NEN-ISO 4499:1993 Hardmetals. Metallographic determination of microstructure (ISO 4499:1978)

VDI - Verein Deutscher Ingenieure

VDI/VDE 3699 Blatt 2-2012 Prozessfuehrung mit Bildschirmen - Grundlagen

Others: phase contrast microscope,Trinocular Phase Contrast Microscope,Interference Contrast Microscopy,phase contrast microscope,microscope phase contrast,microscope phase contrast,Phase Contrast Interference Microscopy,Phase contrast principle,Transmission Electron Microscopy Phase Contrast,Phase Contrast Microscopy and Interference Microscopy,Transmission Electron Microscopy Phase Contrast