Hot fiber equipment

Hot fiber equipment, Total:454 items.

The international standard classification for "Hot fiber equipment" includes: Man-made fibres , Textile fibres in general , Equipment for the chemical industry , Reinforced plastics , Other materials , Textile glass materials , Carbon materials , Products in fibre-reinforced cement , Rolling, extruding and drawing equipment , Natural fibres , Refractories , Forestry equipment , Materials for aerospace construction , Commercial refrigerating appliances , Cables .

The Chinese standard classification for "Hot fiber equipment" includes: Chemical fibre in general , Non-metal chemical machinery equipment , Fibre reinforced composites , Glass fibre , Special carbon material , Chemical fibre , Mould , Fibre crop and product , Refractory fibre , Cotton textile in general , Silviculture machinery and tools , Composite materials and solid fuels , Refrigeration equipment , Cable and its accessory .

Group Standards of the People's Republic of China

T/QGCML 4129-2024 Glass fiber drawing machine
T/SCS 000027-2023 Determination of the tensile properties of ceramic multifilament yarns at elevated temperature
T/ZZB 3059-2023 Three-piece direct roving winder for glass fiber
T/CASME 1069-2023 Moisture-absorption and heat-generating fiber
T/JSQA 196-2024 Automated Pultrusion Equipment for Aerospace Carbon Fiber-Filled Core Material
T/CSTM 00443-2023 Test method of the tensile properties of single fiber——Balance method
T/SZJL 7-2024 Determination of tensile properties of carbon nanotube fibers and bundles
T/CSCM 04-2020 Carbon fiber heating cable
T/ZZB 0893-2018 Fine-denier polyester raschel blanket
T/CSCM 07-2020 Fiber reinforced composite insulated tension pole used in 750kV AC gas-insulated metal-enclosed switchgear（GIS）

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 5349-1985 Test method for axial tensile properties of fiber reinforced thermosetting plastic pipes
GB/T 3354-1999 Test method for tensile properties of oriented fiber reinforced plastics
GB/T 35156-2017 Fiber reinforced polymer composites structural cables
GB/T 27797.6-2011 Fibre-reinforced plastics—Methods of producing test plates—Part 6:Pultrusion moulding
GB/T 14344-2008 Testing method for tensile of man-made filament yarns
GB/T 26749-2011 Carbon fiber - Determination of tensile properties of resin-impregnated yarn
GB/T 6098-2018 Test method for length of cotton fibres—Roller analyser
GB/T 17911.5-1999 Refractory ceramic fibre products--Determination of tensile strength
GB/T 16779-1997 Test method for tension--tension fatigue of fiber reinforced plastic laminates
GB/T 16779-2008 Test method for tension-tension fatigue of fiber reinforced plastic laminates
GB/T 14337-2008 Testing method for tensile properties of man-made staple fibres
GB/T 5349-1985 Test method for longitudinal tensile properties of fiber-reinforced thermosetting plastic pipe
GB/T 41312.2-2023 Test method for measurement of the permeability of chemical equipment—Part 2:Fiber reinforced thermosetting plastic equipment
GB/T 31539-2015 Pultruded fiber reinforced polymer composites structural profiles
GB/T 44307-2024 Carbon-fibre-reinforced composites—Determination of fibre weight content—Thermogravimetry(TG)
GB/T 26749-2022 Carbon fibre—Determination of tensile properties of resin-impregnated yarn
GB/T 3362-2017 Test methods for tensile properties of carbon fiber multifilament
GB/T 17687-1999 Polypropylene staple fiber used by melting method
GB/T 45270-2025 Man-made fibre—Test method for tensile properties of short-cut fibre
GB/T 3362-2005 Test methods for tensile properties of carbon fiber multifilament
GB/T 31290-2014 Carbon fibre―Determination of the tensile properties of single-filament specimens
GB/T 13096.1-1991 Test method for tensile properties of pultruded glass fiber reinforced plastic rods
GB/T 14344-2022 Man-made fibre—Test method for tensile properties of filament yarns
GB/T 31959-2015 Determination of thermal oxidative resistance of carbon fiber
GB/T 6098.1-1985 Test method for length of cotton fibres--Roller analyser
GB/T 11718.7-1989 Medium density fiberboard--Determination of flush tensile strength
GB/T 14344-2003 Testing method for drawability of synthetic filament yarns
GB/T 1447-2005 Fiber-reinforced plastics composites-Determination of tensile properties
GB/T 34520.5-2017 Test methods for continuous silicon carbide fiber-Part 5:Tensile properties of single-filament fiber
GB/T 37794-2019 Carbon fibre—Determination of knot strength
GB/T 14337-2022 Man-made fibre—Test method for tensile properties of staple fibre
GB/T 33837-2017 Coated glass fiber products -- Determination of the tension-tension fatigue properties
GB/T 45755-2025 Pultruding moulds for fiber reinforced polymer composite plates
GB/T 35156-2025 Fiber reinforced polymer composites structural cables
GB/T 31290-2022 Carbon fibre—Determination of the tensile properties of single-filament specimens
GB/T 5349-2005 Fiber-reinforced thermosetting plastic composites pipe—Determination of longitudinal tensile properties
GB/T 3362-1982 Test method for tensile properties of carbon fiber strands
GB/T 43015-2023 Synthetic fibre—Test method for shrinkage in hot air of staple fibres

Professional Standard - Building Materials

JC/T 490-1991 Dimensional tolerances for glass fiber reinforced thermoset plastic pultruded profiles
JC/T 2367-2016 Magnesium silicate fiber blanket for thermal insulation
JC/T 2264-2014 Jute fiber products for sound absorption and thermal insulation
JC/T 349-1983 Fiberglass reinforced plastics. Test method of tension fatigue resistance
JC/T 490-2010 Dimensional tolerance of thermosetting glass fibre reinforced plastics pultruded shapes
JC/T 544-1994 Measurement and Calculation Method of Heat Balance of Glass Fiber Drawing Furnace
JC/T 2362-2016 Fiber-reinforced composite material hydraulic pultrusion machine
JC/T 941-2016 Pultruded glass fiber reinforced plastics profiles for doors and windows
JC/T 2580-2020 Fiber-reinforced composite material caterpillar pultrusion machine
JC/T 490-1992 Dimensional tolerance of extruded sections of fiber glass reinforced thermosetting plastic

Professional Standard - Agriculture

NY 1495-2007 Fiber decorticator for tropical crop---Technical means for ensuring safety
NY/T 2635-2014 Test method for breaking tenacity of ramie fiber
NY/T 1801-2009 Machinery for sisal hemp processing-Fiber drying equipment

Professional Standard - Textile

FZ/T 52007-2006 Polypropylene staple fiber used by melting method
FZ/T 50046-2019 High modulus fibers. Test method for tensile properties of single high modulus fiber
FJJ 215-1986 Quality inspection standard for viscose fiber equipment installation

Taiwan Provincial Standard of the People's Republic of China

CNS 12061-1997 Cellulosic fiber loose fill thermal insulation
CNS 11522-1986 High - Temperature Fiber Blanket Thermal Insulation
CNS 13555-1995 Method of Test for Tensile Properties of Carbon Fiber Reinforced Plastics
CNS 11523-1986 Method of Test for High - Temperature Fiber Blanket Thermal Insulation

Professional Standard - Commodity Inspection

SN/T 3236-2012 Test method for identification of textile fibers-Raman spectrometry
SN/T 0058-1992 Method for test of chemical/wool top length for import - A wira fibre diagram machine

Professional Standard - Aviation

HB 7625-1998 Tensile Test for Carbon Fibre Composite Laminated Wood Under Warm-damp Environment
HB 5440-1989 Tensile-tensile fatigue test method for carbon fiber resin matrix composites

Professional Standard - Traffic

JT/T 818-2011 Tensile Fixture for Glass Fibre Geogrid

Professional Standard - Chemical Industry

HG/T 20696-2018 Technical code of reinforced plastics equipment for chemical industry

Henan Provincial Standard of the People's Republic of China

DB41/T 956-2014 Hot-melt tires for fiber products
DB41/T 955-2014 Hot-melt quilts and mattresses for wadding fiber products
DB41/T 2743-2024 Design and construction technical specification of carbon fiber composite parallel stranded cable

Hebei Provincial Standard of the People's Republic of China

DB13/T 2060-2014 Carbon fiber flexible heating wire

Professional Standard - Public Safety Standards

GA/T 2332-2025 Forensic Science Fiber Inspection Raman Spectroscopy

Ministry of Housing and Urban-Rural Development of the People's Replublic of China

GB 50750-2012 Code for engineering installment acceptance of viscose fiber machinery
GB 51160-2016 Technical Specification for Fiber Reinforced Plastic Equipment and Pipeline Engineering
GB 51139-2015 Design Specification for cellulose fiber pulp factory

Military Standard of the People's Republic of China-General Armament Department

GJB 10246.1-2021 Test methods for mechanical properties of fiber-reinforced airgel insulation materials Part 1: Tensile properties
GJB 993-1990 Test method for tensile properties of aramid fibers without dipping method
GJB 1871-1994 Test method for tensile properties of single carbon fiber

Professional Standard - Business

SB/T 10931-2012 Controlled atmosphere storage appliance—Hollow fiber membrane nitrogen generator

Anhui Provincial Standard of the People's Republic of China

DB34/T 1694-2012 Fiber Reinforced Plastic (FRP) Bolt Forming Equipment

Professional Standard - Construction Industry

JG/T 538-2018 Carbon-fiber heating cables in building

National Metrological Technical Specifications of the People's Republic of China

JJF(纺织)024-2015 Calibration Specification for Roller Fiber Length Analyzer
JJF(纺织) 024-2006 Calibration specification for roller fiber length analyzer
JJF(纺织) 024-2015 Calibration Specification for Roller Fiber Length Analyzer

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1720-2015 Test method for tensile properties of carbon fiber reinforced plastics

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2321-2017 Test method for tensile properties of basalt fiber monofilament

Standard Association of Australia （SAA）

AS 2462:1981 Cellulosic fibre thermal insulation
AS 4359.1:1996 Insulating refractory ceramic fibres - Bulk fibre and blankets
AS 4359.2:1998 Insulating refractory ceramic fibres - Board

National Standardisation Body (ASRO)

STAS 8520-1987 TEXTILE FIBRES Tensile testing on individual fibres

Association Francaise de Normalisation

NF T25-101:1986 CARBON FIBERS. CARBON FIBRE FILAMENT YARN TENSILE TEST.
NF G07-220-1*NF EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1 : method using a manual thermodetection device
NF T25-501-2:2015 Reinforcing fibres - Flax fibres for plastic composites - Part 2: Determination of the tensile properties of elementary fibres
NF T25-501-3:2015 Reinforcement fibers - Flax fibers for plastic composites - Part 3: determination of the tensile properties of technical fibers
NF B51-010:1942 Wood. Tensile test perpendicular to fibres.
NF B51-010:2019 Wood - Tensile test perpendicular to fibres
NF T57-034*NF EN 17129:2018 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
NF G36-001:1995 Fibre ropes for general service. Manila and sisal.
NF G07-220-3*NF EN 14278-3:2004 Determination of the stickiness of cotton fibres - Part 3 : method using an automatic thermodetection rotating drum device
NF T25-102*NF ISO 11566:1997 Carbon fibre. Determination of the tensile properties of single-filament specimens.
NF EN IEC 61754-7-2:2018 Fibronic interconnect devices and passive components - Fibronic connector interfaces - Part 7-2: MPO type connector family - Two fiber rows
NF T25-101*NF EN ISO 10618:2005 Carbon fibre - Determination of tensile properties of resin-impregnated yarn.
NF G07-220-2*NF EN 14278-2:2004 Textiles - Determination of cotton fibres stickiness - Part 2 : method using an automatic thermodetection plate device
NF B38-153*NF EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
NF S52-804:2011 Sports and recreational equipment - Fabrics for awnings - Specification.
NF EN ISO 10618:2005 Carbon fibers - Determination of tensile properties on resin-impregnated yarns

Japanese Industrial Standards Committee (JISC)

JIS R 7606:2000 Carbon fibre -- Determination of the tensile properties of the single-filament specimens
JIS L 1069:1995 Tensile strength tests of natural fibres
JIS L 1069:2002 Tensile strength tests of natural fibres
JIS A 9525:1991 Cellulosic fiber loose fill thermal insulation
JIS F 3419:1995 Ships' steel guy blocks with swivels for fibre rope
JIS L 1069:2002 AMD 1:2008 Tensile strength tests of natural fibres (Amendment 1)
JIS K 7054:1995 Testing method for tensile properties of glass fiber reinforced plastics
JIS R 7608:2007 Carbon fibre -- Determination of tensile properties of resin-impregnated yarn
JIS H 7405:1993 Test method for tensile properties of fiber reinforced metals
JIS K 7073:1988 Testing method for tensile properties of carbon fiber reinforced plastics
JIS K 7054:1987 Testing Method for Tensile Properties of Glass Fiber Reinforced Plastics
JIS K 7087:1996 Testing methods for tensile creep of carbon fibre reinforced plastics
JIS A 5571:2019 Tension member for seismic reinforcement-- Carbon fibre composite strand wires

Ente Nazionale Italiano di Unificazione

UNI EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
UNI 1932:1986 Textiles. Thread testing. Tensile testing
UNI EN 13895:2003 Textiles - Monofilaments - Determination of tensile properties
UNI 6540-1969 Fiberglass products for thermal and sound insulation. Mantle tensile rupture load determination
UNI 3747:1956 Tests on wood fibre panels. Tensile test
UNI 2901-1945 Textile material testing. Fiber tensile test
UNI EN 17129:2019 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
UNI 3747-1956 Wood fiber panel testing. Tensile force* measurement
UNI EN ISO 10618:2003 Carbon fibre - Determination of tensile properties of resin-impregnated yarns
UNI 9299:1988 Mineral fiber. Semirigid mineral fiber panel for thermal matters. Acceptance criteria.
UNI EN 320:1994 Fibreboards. Determination of resistance to axial withdrawal of screws.
UNI EN 2597:1999 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction
UNI EN ISO 10618:2005 Carbon fibre - Determination of tensile properties of resin-impregnated yarn
UNI ISO 3345:1985 Wood. Determination of ultimate tensile stress parallel to grain.

American Society for Testing and Materials (ASTM)

ASTM D3840-10 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
ASTM D3840-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pipe Fittings for Nonpressure Applications
ASTM C208-72(1982) Standard Specification for Insulating Board (Cellulosic Fiber), Structural and Decorative
ASTM C208-12 Standard Specification for Cellulosic Fiber Insulating Board
ASTM C208-95(2001) Standard Specification for Cellulosic Fiber Insulating Board
ASTM C208-08e1 Standard Specification for Cellulosic Fiber Insulating Board
ASTM C208-08 Standard Specification for Cellulosic Fiber Insulating Board
ASTM RR-C16-1039 2012 C1497-Specification for Cellulosic Fiber Stabilized Thermal Insulation
ASTM C208-95 Standard Specification for Cellulosic Fiber Insulating Board
ASTM D3840-01 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
ASTM D3840-99 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
ASTM C209-98 Standard Test Methods for Cellulosic Fiber Insulating Board
ASTM RR-C16-1037 2011 C0739-Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM D3840-01(2005) Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
ASTM C1497-01 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
ASTM C1497-01e1 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
ASTM C209-12 Standard Test Methods for Cellulosic Fiber Insulating Board
ASTM C1497-24 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
ASTM C209-15 Standard Test Methods for Cellulosic Fiber Insulating Board
ASTM D2105-25 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM C1497-04 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
ASTM C739-17 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM D2996-00 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-01(2007)e1 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-95 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-01 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-15 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM C1497-16 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
ASTM C1497-12 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
ASTM C739-25 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C739-24 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C739-03 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C739-05a Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C739-21 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C739-05b Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C739-03e1 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C739-11 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM RR-C16-1010 1986 C0739-Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM D3917-96(2002)e1 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
ASTM D2105-01(2019) Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D3917-08 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
ASTM D3917-96 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
ASTM C739-21a Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C739-00e1 Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation
ASTM C739-77 Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation
ASTM C739-00 Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation
ASTM C739-08 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C739-88 Standard Specification for Cellulose Fiber (Wood-Base) Loose-Fill Thermal Insulation
ASTM D3517-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM RR-D20-2006 2022 D3916-Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM C846-16(2021) Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
ASTM D3262-11 Standard Specification for x201C; Fiberglass x201D; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3916-22 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM D3916-02 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM C1056-86 Test method for preparation of loose-fill mineral fiber thermal insulation samples
ASTM D3262-25 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM C1015-02 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
ASTM C1015-99 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
ASTM D3517-11 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D3517-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pressure Pipe
ASTM C1015-06 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
ASTM D3916-08(2016) Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM D2653-07(2018) Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)

Korean Agency for Technology and Standards (KATS)

KS M 3535-1999 Pultruded fibre reinforced plastics
KS M 3531-1-1998 Pultruded fiber reinforced plastic
KS M 3535-2024 Pultruded fibre reinforced plastics
KS M 3535-2019 Pultruded fibre reinforced plastics
KS M 3535-2009 Pultruded fibre reinforced plastics
KS F 3300-2022 Wood fiber panel for thermal insulation
KS F 4904-2009(2019) Stretchy asphalt roofing felts(synthetic fiber base)
KS F 5660-2001 Polyester fiber sound absorbing and thermal insulation
KS F 5660-2017 Polyester fiber sound absorbing and thermal insulation
KS V 3429-2023 Steel guy blocks with swivels for fiber rope
KS M 3880-2011(2021) Cellulose foam for thermal insulation
KS F 5660-2017(2022) Polyester fiber sound absorbing and thermal insulation
KS F 2565-2020 Method for tension test of steel fibers for concrete
KS D 8508-1997 Test method for tensile properties of fiber reinforced metals
KS F 5660-2022 Polyester fiber sound absorbing and thermal insulation
KS F 2565-2015 Method for tension test of steel fibers for concrete
KS F 2565-2015(2020) Method for tension test of steel fibers for concrete
KS L 6803-2012(2017) Carbon fiber－Determination of the tensile properties of the single-filament specimens
KS L 6803-2012(2022) Carbon fiber－Determination of the tensile properties of the single-filament specimens
KS L 6803-2022 Carbon fiber－Determination of the tensile properties of the single-filament specimens
KS L 6804-2012(2017) Carbon fibre－Determination of the tensile properties of the single-filament specimens
KS D 8508-2022 Test method for tensile properties of fiber reinforced metals
KS L ISO 10618-2023 Carbon fibre — Determination of tensile properties of resin-impregnated yarn
KS L ISO 3342-2013(2018) Textile glass－Mats－Determination of tensile breaking force
KS D 8508-1997(2022) Test method for tensile properties of fiber reinforced metals
KS L ISO 10618-2018(2023) Carbon fibre — Determination of tensile properties of resin-impregnated yarn
KS V 3429-2013(2023) Steel guy blocks with swivels for fiber rope
KS F 5660-2011 Polyester fiber sound absorbing and thermal insulation
KS M 3381-2009 Testing method for tensile properties of glass fiber reinforced plastics
KS L ISO 3342:2008 Textile glass-Mats-Determination of tensile breaking force
KS D 8508-1997(2017) Test method for tensile properties of fiber reinforced metals
KS L ISO 3342:2013 Textile glass-Mats-Determination of tensile breaking force
KS M 3381-2004 Testing method for tensile properties of glass fiber reinforced plastics
KS L ISO 10618-2018 Carbon fibre — Determination of tensile properties of resin-impregnated yarn
KS L ISO 10618:2018 Carbon fibre — Determination of tensile properties of resin-impregnated yarn

British Standards Institution (BSI)

BS 2052:1965 Ropes made from coir, hemp, manilla & sisal
BS 5803-5:1985 Thermal insulation for use in pitched roof spaces in dwellings - Specification for installation of man-made mineral fibre and cellulose fibre insulation
BS EN 61744:2005 Calibration of fibre optic chromatic dispersion test sets
BS EN 2747:1998 Glass fibre reinforced plastics - Tensile test
BS EN 17129:2018 Continuous-fibre-reinforced plastic composites. Pultruded unidirectional rods. Determination of tensile properties in parallel to the fibre direction
BS EN 698:1995 Fibre ropes for general service. Manila and sisal
BS 5803-3:1985 Thermal insulation for use in pitched roof spaces in dwellings - Specification for cellulose fibre thermal insulation for application by blowing
BS EN 14278-1:2005 Textiles - Determination of cotton fibre stickiness - Method using a manual theromodetection device
BS EN 14278-1:2004 Textiles-Determination of cotton fibre stickiness-Part 1:Method using a manual thermodetection device
BS 4029:1966 Tensile elastic recovery of single fibres and filaments
BS EN 698:1995(1999) Fibre ropes for general service — Manila and sisal
BS EN 2597:1998 Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction
BS ISO 11566:1996(1998) Carbon fibre — Determination of the tensile properties of single - filament specimens
BS ISO 11566:1996 Carbon fibre - Determination of the tensile properties of single-filament specimens
BS 4029:1978 Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines)
BS ISO 19375:2024 Fibre-reinforced composites. Measurement of interfacial shear strength by means of a micromechanical single-fibre pull-out test
BS ISO 3342:2011 Textile glass. Mats. Determination of tensile breaking force
PD IEC TR 61282-14:2019 Fibre optic communication system design guides. Determination of the uncertainties of attenuation measurements in fibre plants
BS 3411:1971 Method for the determination of the tensile properties of individual textile fibres
BS EN ISO 10618:2004 Carbon fibre - Determination of tensile properties of resin-impregnated yarn
BS EN 61754-20:2012 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type LC connector family
BS EN 61300-2-19:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Damp heat (steady state)
24/30477435 DC BS ISO 19375 Fibre-reinforced composites -Measurement of interfacial shear strength by means of a micromechanical single-fibre pull-out test
BS EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
BS ISO 1268-5:2001 Fibre-reinforced plastics - Methods of producing test plates - Filament winding
BS EN ISO 10618:2000 Carbon fibre - Determination of tensile properties of resin-impregnated yarns
BS 5803-3:1985(1999) Thermal insulation for use in pitched roof spaces in dwellings — Part 3 : Specification for cellulose fibre thermal insulation for application by blowing

Swedish Institute for Standards

SIS 65 00 07-1948 Determine fiber tensile properties
SS-EN 17129:2018 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
SS 812310:2014 Fibre Concrete - Design of Fibre Concrete Structures
SS-EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
SS-EN 2561:1995 Aerospace series - Carbon fibre reinforced plastics - Unidirection laminates - Tensile test parallel to the fibre direction
SIS PR 20 04 02 Test Method, Tensile Fixtures on Fiber Cage Plastics

Bureau of Indian Standards

IS 235-1989 Textile fibers—Tensile properties of various fibers—Methods of determination
IS 5748-1969 Test method for tensile strength of asbestos fibers
IS 2727-2022 Method for quantitative chemical analysis of binary mixture of manila and sisal fibres
IS 2727-1964 Methods for quantitative chemical analysis of binary mixtures of manila and sisal fibers
IS 17311-2019 Carbon Fibre — Determination of the Tensile Properties of Single-Filament Specimens
IS 18455-2023 Carbon Fibre Determination of Tensile Properties of Resin-Impregnated Yarn

Polski Komitet Normalizacyjny (PKN)

PN P80011-1989 Textile raw materials Polyacrylic fibres dyedAnilana
PN P80010-1988 Textile raw materials Polyacrylic fibres Anilana
PN P04680-13-1991 Retted flax straw Determination of long fibre output by means of KL-14 device
PN BN 6118-15-1965 Thermal Spray Nitrocellulose Paint Thinner

Underwriters Laboratories (UL)

ULC 703-2025 Standard for Cellulose Fibre Insulation for Buildings / Norme sur l'isolant en fibre cellulosique pour les bâtiments

GCC Standardization Organization

BH GSO ASTM D2105:2024 Standard test method for longitudinal tensile properties of "fiberglass" (glass-fiber-reinforced thermosetting-resin) pipe and tube
GSO ISO 1181:2015 Fibre ropes -- Manila and sisal -- 3-, 4- and 8-strand ropes
GSO ISO 5079:2008 Textile fibres -Determination of breaking force and elongation at break of individual fibres
GSO ISO 9904:2015 Textile machinery and accessories -- Steel pins for spinning preparatory and spinning machinery
GSO ISO 11566:2014 Carbon fibre -- Determination of the tensile properties of single-filament specimens
GSO ISO 4510-2:2013 Earth-moving machinery -- Service tools -- Part 2: Mechanical pullers and pushers
GSO ASTM D2105:2009 Standard test method for longitudinal tensile properties of "fiberglass" (glass-fiber-reinforced thermosetting-resin) pipe and tube

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ASTM D2105:2009 Standard test method for longitudinal tensile properties of "fiberglass" (glass-fiber-reinforced thermosetting-resin) pipe and tube
OS GSO ISO 10618:2013 Carbon fibre - Determination of tensile properties of resin-impregnated yarn

American National Standards Institute （ANSI)

ANSI/ASTM D3840:2010 Specification For "fiberglass " Glass-fiber-reinforced Thermosetting-resin Pipe Fittings For Nonpressure Applications
ANSI/ASTM D2996:2001 Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe
ANSI/ASTM D2310:2006 Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D2105:2001 Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ANSI/ASTM D4024:2012 Specification for Machine Made Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ANSI/ASTM D3262:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ANSI/TAPPI T1013 om-2010 Loss on ignition of fiber glass mats
ANSI/ASTM D2997:2001 Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ANSI/VITA 46.4-2012 PCIExpress on the VPX Fabric Connector

Canadian General Standards Board （CGSB)

CAN/CGSB 41.22-1993 Fibreglass-Reinforced Plastic Corrosion-Resistant Equipment
CAN/CGSB-51.60-M90-1990 Loose-fill cellulose fiber thermal insulation
CAN/CGSB-51.10-1992 Thermal insulation in mineral fibers, panels
CGSB 40-GP-1M METH 9-1978 Methods of Sampling and Testing Cordage Nonmanila Fiber

Gosstandart of Russia

GOST 33598-2015 Carbon fiber. Determination of thermal oxidative resistance of carbon fibers
GOST R ISO 1181-2007 3-, 4- and 8-strand Manila and sisal fibre ropes. General specifications
GOST 32667-2014 Carbon fibre. Determination filament's tensile properties
GOST R 53552-2009 Cotton fibre. Method for determination of unit breaking strength
GOST R ISO 10618-2012 Carbon fibre. Method for determination of tensile properties of resin-impregnated yarn
GOST R 57801-2017 Pultruded profiles from glass-fiber-reinforced plastic. Tolerances
GOST 34261-2017 Glassfiber. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
GOST 6737-1980 Drawframes for cotton and man-made fibres. General specifications
GOST R 54924-2012 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods for determination of longitudinal tensile properties

Spanish Association for Standardization (UNE)

UNE 59501:1992 FOOTWEAR. TENSILE STRENGTH OF FIBREBOARD.
UNE-EN 17129:2020 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
UNE-EN 61756-1:2006 Fiber optic interconnect devices and passive components Fiber management system interfaces
UNE 40407:1981 TEXTILE FIBERS. CONTROL OF LONGITUDINAL RETRACTION EXPERIMENTED BY CHEMICAL FIBERS IN THERMIC TREATEMENTS
JIS A 9504:2024 Man made mineral fibre thermal insulation materials
UNE-EN 2561:1996 AEROSPACE SERIES. CARBON FIBRE REINFORCED PLASTICS. UNIDIRECTIONAL LAMINATES. TENSILE TEST PARALLEL TO THE FIBRE DIRECTION.
UNE-EN 2597:1999 AEROSPACE SERIES. CARBON FIBRE REINFORCED PLASTICS. UNIDIRECTIONAL LAMINATES. TENSILE TEST PERPENDICULAR TO THE FIBRE DIRECTION.
UNE-EN 2747:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. TENSILE TEST.

German Institute for Standardization

DIN 58141-7:1990 Testing of fibre optic elements; determination of tensile load of fibre optic cables
DIN EN 17129:2019-02 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction; German version EN 17129:2018
DIN EN 17129:2019 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
DIN EN 17129 E:2017 Draft Document - Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties parallel to the fibre direction; German and English version prEN 17129:2017
DIN 58141-7 E:2012-08 Measurement of fiber optic elements - Part 7: Determination of tensile load of fiber optic cables
DIN 53843-2:1988-03 Testing of textiles; loop tensile test for staple fibres
DIN EN 17129 E:2017-07 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
DIN 16459:2021-06 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
DIN EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device; German version EN 14278-1:2004
DIN 16459:2023-08 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
DIN EN ISO 10618:2004-11 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004); German version EN ISO 10618:2004
DIN EN 61:1977 Determination of tensile properties of glass fiber reinforced plastics
DIN EN ISO 10618:2004 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004); German version EN ISO 10618:2004
DIN EN 14278-2:2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device; German version EN 14278-2:2004
DIN SPEC 40032:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Type URM connector family
DIN EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005
DIN SPEC 16457:2019-12 Short fiber reinforced thermoplastics - Tension-compression-shear test with tube specimens under cyclic loading
DIN 16459 E:2020-12 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
DIN 16459:2019-12 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
DIN 16459 E:2018-12 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
DIN 16459:2023 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
DIN 16459:2021 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
DIN 16459:2019 Determination of the fiber volume content of fiber-reinforced Plastics by thermogravimetric analysis (TGA)
DIN 65378:1989-11 Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction
DIN SPEC 16457:2019 Short fiber reinforced thermoplastics - Tension-compression-shear test with tube specimens under cyclic loading

GM Europe

GME STD 518859-1998 Fibre board 8859 Hot stamped board designed with PP-, polyester- and bast fibres Fiberskiva 8859 Varmpressad skiva uppbyggd av PP-, polyesteroch bastfibrer
GME STD 518859-2000 Fibre board 8859 Hot stamped board designed with PP-, polyester- and bast fibres Fiberskiva 8859 Varmpressad skiva uppbyggd av PP-, polyesteroch bastfibrer

Society of Automotive Engineers (SAE)

SAE AMS3679B-1993 Insulation, Thermal Ceramic Fiber
SAE AMS3680C-1993 Insulation, Thermal Silica Fiber
SAE AMS3679 Insulation, Thermal, Ceramic Fiber
SAE AMS3679C-2015 Insulation, Thermal, Ceramic Fiber
SAE AMS3679B-1998 Insulation, Thermal, Ceramic Fiber
SAE AMS3679B Insulation, Thermal, Ceramic Fiber
SAE AMS3680A-1974 INSULATION, THERMAL Silica Fiber
SAE AMS3679A Insulation, Thermal, Ceramic Fiber
SAE AMS3680B-2011 INSULATION, THERMAL Silica Fiber
SAE AMS3679C Insulation, Thermal, Ceramic Fiber
SAE AMS3680-1949 INSULATION, THERMAL Silica Fiber
SAE AMS3679A-1992 INSULATION, THERMAL Ceramic Fiber
SAE AMS3680C-2006 Insulation, Thermal Silica Fiber
SAE AMS3812A-1988 RODS, GLASS FIBER, POLYESTER RESIN, COATED Pultrusion
SAE AMS3812C Rods, Glass Fiber, Polyester Resin, Loaded Pultrusion
SAE AMS3679B-2006 Insulation, Thermal Ceramic Fiber
SAE AMS3680D-2015 Insulation, Thermal Silica Fiber
SAE AMS3812-1978 RODS, GLASS FIBER/POLYESTER RESIN, COATED Pultrusion
SAE AMS3812B-1993 Rods, Glass Fiber, Polyester Resin, Coated Pultrusion
SAE AMS3812B Rods, Glass Fiber, Polyester Resin, Coated, Pultrusion
SAE AMS3812A Rods, Glass Fiber, Polyester Resin, Coated, Pultrusion
SAE AMS3812 Rods, Glass Fiber, Polyester Resin, Coated, Pultrusion
SAE AMS3892/10A Tow, Carbon Fiber for Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus
SAE AMS3892/10B Tow, Carbon Fiber For Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus
SAE AMS3892/12A Tow, Carbon Fiber For Structural Composites 730 (5033) Tensile Strength, 41 (283) Tensile Modulus
SAE AMS3892/12 Tow, Carbon Fiber for Structural Composites 730 (5033) Tensile Strength, 41 (283) Tensile Modulus
SAE AMS3892/10 Tow, Carbon Fiber for Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus
SAE AMS3812C-2016 Rods@ Glass Fiber@ Polyester Resin@ Loaded Pultrusion
SAE AMS3812B-1998 Rods, Glass Fiber, Polyester Resin, Loaded Pultrusion
SAE AMS3811C-2016 Rods@ Aramid Fiber@ Polyester Resin Coated Pultrusion

GM Holden Ltd

HOLDEN HN 2034-2012 Felt - Thermo-bonded Fibre
HOLDEN HN 2034-2005 Felt - Thermo-Bonded Fibre
HOLDEN HN 1929-2009 INSULATION – CERAMIC FIBRE
HOLDEN HN 2443-2004 THERMOFORMABLE POLYESTER FIBRE INSULATOR
HOLDEN HN 2443-2013 Thermoformable Polyester Fibre Insulator

Indonesia Standards

SNI 03-0186-1987 Glass wool heat insulation
SNI 15-1571-2004 Bata tahan api isolasi jenis samot

Fondo para la Normalización y Certificación de la Calidad Venezuela, République bolivarienne du

COVENIN 973-1976 Venezuela carboxyfiber sodium standard

Danish Standards Foundation

DANSK DS/EN ISO 1181:2004 Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes
DANSK DS/EN 17129:2018 Continuous-fibre-reinforced plastic composites – Pultruded unidirectional rods – Determination of tensile properties in parallel to the fibre direction
DANSK DS/EN ISO 10618:2004 Carbon fibre - Determination of tensile properties of resin-impregnated yarn
DS/EN ISO 10618:2004 Carbon fibre - Determination of tensile properties of resin-impregnated yarn

European Committee for Standardization (CEN)

EN 13496:2002 Thermal insulation products for building applications Determination of the mechanical properties of glass fibre meshes
EN 13496:2013 Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)
EN 17129:2018 Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
EN 61:1977 Glass reinforced plastics. Determination of tensile properties
EN 698:1995 Fibre Ropes for General Service - Manila and Sisal
EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
EN ISO 10618:1999 Carbon Fibre - Determination of Tensile Properties of Resin-Impregnated Yarns ISO 10618: 1999
EN 2597:1998 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction

Standards Norway

NS-EN 17129:2018 Continuous-fibre-reinforced plastic composites — Pultruded unidirectional rods — Determination of tensile properties in parallel to the fibre direction
NS-EN 698:1995 Fibre ropes for general service — Manila and sisal

BELST

STB 995-2011 Carbonic fiber materials URAL. General specifications

Swiss Association for Standardization (SNV)

VSM 33715-1968 Fiberglass felt mat. Determine tensile strength

International Association of Plumbing and Mechanical Officials

IAPMO PS 82-1995 Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Fittings

Czech Standards Institute (UNMZ)

CSN 80 0207-1988 Man-made fibres. Staple and tow. Method of determination of loop tensile strength
CSN 34 3191-1964 Safety technical regulations for attendance and maintenance of high-frequency electrothermal plants
CSN 34 3191-1985 Safety technical regulations for attendance and maintenance of high-frequency electrothermal plants
CSN 49 0151-1983 Fiberboards. Determination of tension strength perpendicular to the plane of tne panel
CSN 80 0200-1984 Testing of single fíbre tensile strength and elongation
CSN 80 0523-1974 Man-made fibres.Determination of pre-paralion contenl and low-moleeular parl on man-made fibres

GM North America

GM GMN3914-2001 Fiber Graphic, Heat Transfer

Canadian Standards Association (CSA)

CSA A101-1975 Mineral Fibre Thermal Building Insulation
CSA A101-M1983-1983 Thermal insulation of buildings, mineral fiber
CAN/ULC 703:2025 Norms on Cellulosic Fiber Insulation for Buildings

National Aeronautics and Space Administration (NASA)

NASA-CR-2057-1972 Tensile failure criteria for fiber composite materials

Standards Institution of Israel

S.I.455-1962 TESTING THE TENSILE STRENGTH OF FIBRES YARNS AND THREADS
S.I.750-1969 MINERAL WOOL FOR THERMAL INSULATION: LOOSE WOOL

Military Standards (MIL-STD)

MIL MIL-DTL-32585-2017 INSULATION, THERMAL AND ACOUSTIC, FIBROUS GLASS
MIL MIL-B-2766C-1987 BATTING, FIBROUS GLASS, LIFESAVING EQUIPMENT (NO S/S DOCUMENT)

The Japanese Circulation Society

JCS 5502-2007 Heat proof optical fiber cables

Institute of Electrical and Electronics Engineers (IEEE)

IEEE C136.20-1990 Roadway Lighting Equipment - Fiber-Reinforced Plastic (FRP) Lighting Poles
IEEE Std C136.20-1990 Roadway Lighting Equipment - Fiber-Reinforced Plastic (FRP) Lighting Poles

National Electrical Manufacturers Association（NEMA)

NEMA C136.20-1986 ROADWAY LIGHTING EQUIPMENT - FIBER-REINFORCED PLASTIC (FRP) LIGHTING POLES

United States Navy

NAVY MIL-I-16411 F-1988 INSULATION FELT, THERMAL, GLASS FIBER
NAVY MIL-I-742 F-1980 INSULATION BOARD, THERMAL, FIBROUS GLASS

International Electrotechnical Commission (IEC)

IEC 61314-1:2011 Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification
IEC 60874-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
IEC 61274-1:2011 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification

Belgian Standards Institute

NBN 928-1971 Glass fiber reinforced plastic. Tensile property measurement

International Organization for Standardization (ISO)

ISO 11566 Carbon fibre - Determination of the tensile properties of single-filament specimens
ISO 10618:1999 Carbon fibre - Determination of tensile properties of resin-impregnated yarn
ISO 11566:1996 Carbon fibre - Determination of the tensile properties of single-filament specimens
ISO 9489:1991 Thermally insulated fibre-cement piping systems
ISO 10618:2004 Carbon fibre - Determination of tensile properties of resin-impregnated yarn
ISO 9163:1996 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO/DIS 19375:2024 Fibre-reinforced composites-Measurement of interfacial shear strength by means of a micromechanical single-fibre pull-out test
ISO 3342:1995 Textile glass - Mats - Determination of tensile breaking force
ISO 3342:2011 Textile glass - Mats - Determination of tensile breaking force

Underwriter Laboratories of Canada (ULC)

CAN/ULC S706-2002 Standard for Wood Fibre Thermal Insulation for Buildings
CAN/ULC-S706-2002 Standard for Wood Fibre Thermal Insulation for Buildings
CAN/ULC-S702-1997 Standard for Mineral Fibre Thermal Insulation for Buildings

Associação Brasileira de Normas Técnicas

ABNT P-MB-473-1969 Hot washing size adjustment of cotton, linen, ramie fiber, man-made fiber and other textiles

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1851.16:1997 Maintenance of fire protection equipment - Pyrogen fire extinguishing aerosol systems

Malaysia Standards

MS 1020-1986 Specification for mineral fiber insulation materials

Cuban Institute of Standards and Metrology

NC 43-14-1968 Particle boards and fibre boards Tensile strength perpendicular to the surface
NC 43-13-1968 Particle boards and fibre boards Tensile strength parallel to the surface

Türk Standardları Enstitüsü

TS 958-1971 D?AMETERS OF DRAFTING ROLLERS FOR COTTON, WOOL, SPUN STLK. AND STAPLE FIBRE

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 10618:2016 Carbon fibre - Determination of tensile properties of resin-impregnated yarn

South African Bureau of Standard

SANS 6173:2004 Fibreboard - Preparation of test specimens

American Water Works Association (AWWA)

AWWA M45 ERTA-2008 Fiberglass Pipe Design

Cooling Technology Institute

CTI STD-137-2007 Fiberglass Pultruded Structural Products for Use in Cooling Towers
CTI STD-137-2014 Fiberglass Pultruded Structural Products for Use in Cooling Towers
CTI STD-137-2013 Fiberglass Pultruded Structural Products for Use in Cooling Towers
CTI STD-137-2003 Fiberglass Pultruded Structural Products for Use in Cooling Towers

Aerospace, Security and Defence Industries Association of Europe (ASD)

PREN 2597-1990 Aerospace Series Carbon Thermosetting Resin Undirectional Laminates Tensile Test Perpendicular to the Fibre Direction (Issue P 1)

Others: