Rubber hardness measurement method

Rubber hardness measurement method, Total:465 items.

The international standard classification for "Rubber hardness measurement method" includes: Rubber , Other rubber and plastics products , Plastics , Rubber and plastics products in general , Equipment for the chemical industry .

The Chinese standard classification for "Rubber hardness measurement method" includes: Rubber products in general , Other rubber products , Basic standards and general methods for synthetic resin and plastic , Basic standard and general method for synthetic rubber , Special chemical instrument and meter , Mechanics Measurement .

未注明发布机构

DIN ISO 27588 E:2014-05 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ASTM RR-D11-1091 2000 D2240- Standard Test Method for Rubber Property—Durometer Hardness
DIN ISO 48-3 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
ASTM RR-D11-1024 1983 D1415-Test Method for Rubber Property—International Hardness
ASTM RR-D11-1029 1984 D2240-Test Method for Rubber Property—Durometer Hardness
DIN ISO 27588:2010-05 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
DIN ISO 48-9 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers
DIN ISO 48-8 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
DIN ISO 18898 E:2014-06 Rubber - Calibration and verification of hardness testers
DIN ISO 18898 E:2016-09 Rubber - Calibration and verification of hardness testers
DIN ISO 48-4 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1697-2001 Ebonite-Determination of impact strength
GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
GB/T 23651-2009 Rubber vulcanized or thermoplastic - Hardness testing - Introduction and guide
GB/T 6031-1998 Rubber,vulcanized or thermoplastic-Determination of hardness(hardness between 10 IRHD and 100 IRHD)
GB/T 531.1-2008 Rubber vulcanized or thermoplastic - Determination of indentation hardness - Part 1：Duromerer method （Shore hardness）
GB/T 12832-1991 Rubbers-Determination of crystallization effects by hardness measurements
GB/T 531.2-2009 Rubber vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
GB/T 1699-2003 Ebonite--Determination of martin heat resistance temperature
GB/T 39693.8-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 8:Apparent hardness of rubber-covered rollers by Pusey and Jones method
GB/T 1700-2001 Ebonite-Determination of shearing strength
GB/T 7760-2003 Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method
GB/T 12832-2008 Rubber-Determination of crystallization effects by hardness measurements
GB/T 2411-2008 Plastics and ebonite - Determination of indentation hardness by means of a duronmeter(shore hardness)
GB/T 531-1999 Rubber-Determination of indentation hardness by means of pocket hardness meters
GB/T 2438-2002 Ebonite--Determination of crushing strength
GB/T 39693.7-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 7:Apparent hardness of rubber-covered rollers by Shore-type durometer method
GB/T 1698-2003 Ebonite--Determination of hardness by means of a durometer

化学工业部

HG/T 2450-1993 Determination of apparent hardness of rubber rollers International rubber durometer method

Professional Standard - Chemical Industry

HG/T 3848-2008 Ebonite - Determination of shearing strength
HG/T 3077-1988 Requirements for hardness of rubber or plastics covered rollers
HG/T 2118-1991 Conventional international rubber hardness machine with low hardness
HG/T 3847-2008 Ebonite - Determination of martin heat resistance temperature
HG/T 3077-1999 Requirements for hardness of rubber or plastics covered rollers
HG/T 2450-1999 Rubber -- Covered rollers -- Determination of apparent hardness : IRHD method
HG/T 3845-2008 Ebonite-Determination of impact strength
HG/T 3844-2008 Ebonite-Determination of cross breaking strength
HG 2116-1991 Conventional International Rubber Hardometer - High Hardness
HG/T 2116-1991 Conventional international rubber hardness machine with high hardness
HG/T 3323-1982 Method for Determination of Rubber Slurry Viscosity (Rotary Viscometer Method)
HG 2117-1991 Conventional International Rubber Hardometer - Medium Hardness
HG 2118-1991 Conventional International Rubber Hardometer - Low Hardness
HG/T 3323-2008 Rubber Latex Bord - Determination of viscosity(Rotating viscometer method)
HG/T 3846-2008 Ebonite-Determination of hardness by means of a durometer
HG/T 2117-1991 Medium hardness of conventional international rubber hardness machine
HG/T 3863-2008 Ebonite-Determination of crushing strength

Professional Standard - Aviation

HB 5234-1983 Test Method for Hardness of O-shaped Rubber Ring

Taiwan Provincial Standard of the People's Republic of China

CNS 5140-1980 Method of Test for Cross-Breaking Strength of Ebonite
CNS 3555-1999 "Methods of test for hardness of rubber, vulcanized or thermoplastic"
CNS 3555-2008 Methods of test for hardness of rubber,vulcanized or thermoplastic
CNS 5139-1980 Method of Test for Crushing Strength Direction of Ebonite

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39693.3-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale
GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers
GB/T 39693.6-2020 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 6:Apparent hardness of rubber-covered rollers by IRHD method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 6031-2017 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)

Group Standards of the People's Republic of China

T/ZZB 0553-2018 Dual-hardness silicone nipple

National Metrological Verification Regulations of the People's Republic of China

JJG 2049-1990 Measuring Instruments for International Rubber Hardness Degree

Professional Standard - Agriculture

GB 6032-1985 Determination of international hardness of vulcanized rubber (30 ~ 85IRHD) micro test method

Korean Agency for Technology and Standards (KATS)

KS M 6784-1999 Hardness testing methods for vulcanized rubber
KS M 6784-1994 Hardness testing methods for vulcanized rubber
KS M ISO 3387:2009 Rubber-Determination of crystallization effects by hardness measurements
KS M ISO 3387:2014 Rubber — Determination of crystallization effects by hardness measurements
KS M 6784-2014 Hardness testing methods for rubber, vulcanized or thermoplastic
KS M 6784-2009 Hardness testing methods for rubber, vulcanized or thermoplastic
KS M 6511-2001 Testing methods for IRHD for vulcanized rubbers
KS M ISO 48:2008 Rubber, vulcanized or thermoplastic-Determination of hardness(hardness between 10 IRHD and 100 IRHD)
KS M ISO 7619-1-2021 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 7619-1-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 27588-2021 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 7267-1:2010 Rubber-covered rollers－Determination of apparent hardness－Part 1：IRHD method
KS M ISO 3387-2014(2019) Rubber — Determination of crystallization effects by hardness measurements
KS M ISO 3387-2019 Rubber — Determination of crystallization effects by hardness measurements
KS M ISO 7619-2-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M ISO 7619-2-2021 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M 6636-1992 Method of measurement of conveyor RUBBER belt thickness
KS M ISO 868-2021 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 48-2023 Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
KS M ISO 7619-2:2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method
KS M ISO 7619-2:2011 Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 2:IRHD pocket meter method
KS M ISO 868-2016(2021) Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 27588:2015 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 27588:2010 Rubber, vulcanized or thermoplastic-Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 7619-1:2011 Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 1:Durometer method(Shore hardness)
KS M ISO 7619-1:2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 19004-2023 Rubber and rubber products－Determination of the sensitivity of test methods
KS M ISO 19004-2007(2022) Rubber and rubber products－Determination of the sensitivity of test methods
KS M ISO 7267-2:2010 Rubber-covered rollers－Determination of apparent hardness－Part 2：Shore-type durometer method
KS M ISO 19004:2007 Rubber and rubber products－Determination of the sensitivity of test methods
KS M ISO 7780-2021 Rubber and rubber latices－Determination of manganese content－Sodium periodate photometric methods
KS M ISO 7780:2006 Rubber and rubber latices-Determination of manganese content-Sodium periodate photometric methods
KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
KS M ISO 19004-2007(2017) Rubber and rubber products－Determination of the sensitivity of test methods
KS M ISO 7780-2016(2021) Rubber and rubber latices－Determination of manganese content－Sodium periodate photometric methods

ZA-SANS

SANS 3387:2003 Rubber - Determination of crystallization effects by hardness measurements
SANS 7619-1:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 1: Durometer method (Shore hardness)
SANS 7619-2:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 2: IRHD pocket meter method
SANS 10048:2009 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SANS 10048:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SANS 5650:1972 Determination of hardness of elastomeric material
SANS 7619:2003 Rubber - Determination of indentation hardness by means of pocket hardness meters
SANS 5870:1976 Hardness of vulcanized rubbers of hardness 30-95 IRH degrees
SANS 5870:2008 Hardness of vulcanized rubbers of hardness 30-95 IRH degrees

PT-IPQ

NP 2918-1988 Rubber, vulcanized Determination of hardness (hardness between 10 and 35 IRHD)
NP 2916-1988 Vulcanized rubbers Determination of hardness (hardness between 30 and 85 IRHD)
NP 2917-1988 Rubber, vulcanized Determination of hardness (hardeness between 85 and 100 IRHD)
NP ISO 7619:2001 Rubber Determination od indentation hardness by means of packet hardness meters

Standard Association of Australia （SAA）

AS 1683.15.2:1990 Methods of test for elastomers - Durometer hardness
AS 1683.15.1:2000 Methods of test for elastomers - International rubber hardness
AS 1683.5:1974 Methods of test for rubber - Coagulum content of rubber latices
AS 1683.4:1992 Methods of test for elastomers - Rubber, vulcanized - Determination of density
AS 1683.3:2001 Methods of test for elastomers - Latex, rubber, natural concentrate - Determination of dry rubber content
AS 1683.2:2001 Methods of test for elastomers - Latex, rubber - Determination of total solids content

RU-GOST R

GOST 263-1975 Rubber. Method for the determination of Shore A hardness
GOST R ISO 7619-1-2009 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method of measurement (Shore hardness)
GOST 24616-2017 Plastics cellular and foam rubber. Method for determination of hardness
GOST 255-1990 Ebonite. Determination of cross-breaking strength
GOST 8.406-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for rubber. Verification methods and means
GOST 14863-1969 Rubber. Method for determination of rubber to cord adhesion
GOST 24621-1991 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 20403-1975 Rubber. Method for determination hardness in international units (30 to 100 IRHD)
GOST 24616-1981 Plastics celluar and foam rubber. Method for determination of hardness
GOST 9627.1-1975 Glued plywood. Method for determination of hardness
GOST 211-1975 Ebonite. Method for determination of shear strength

American Society for Testing and Materials (ASTM)

ASTM D2240-05(2010) Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM D2240-15 Standard Test Method for Rubber Property&x2014Durometer Hardness
ASTM D2240-15(2021) Standard Test Method for Rubber Property—Durometer Hardness
ASTM D2240-02 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D2240-15e1 Standard Test Method for Properties of Rubber &8212; Durometer Hardness
ASTM D1415-88(1994) Standard Test Method for Rubber Property-International Hardness
ASTM D2240-03 Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM D1415-68 Standard Test Method for International Hardness Of Vulcanized Rubber
ASTM D2240-00 Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM D2240-02b Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM D1415-88(1999) Standard Test Method for Rubber Property-International Hardness
ASTM D2240-05 Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM D2240-02a Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM D1415-06(2012) Standard Test Method for Rubber Propertymdash;International Hardness
ASTM D2240-04e1 Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM D1415-05 Standard Test Method for Rubber Property8212;International Hardness
ASTM D1415-06 Standard Test Method for Rubber Property8212;International Hardness
ASTM D2240-04 Standard Test Method for Rubber Property8212;Durometer Hardness
ASTM D1415-18 Standard Test Method for Rubber Property—International Hardness
ASTM D1415-88(2004) Standard Test Method for Rubber Property—International Hardness

SCC

BS 903-A26:1969 Physical testing of rubber-Determination of hardness
AS 1683.15.1:1990 Methods of test for elastomers - International rubber hardness
BS 5294:1976 Method of test. Determination of crystallization effects in rubbers by hardness measurements
BS 903-A7:1957 Methods of testing vulcanized rubber. Determination of hardness
UNE 53549:1991 RUBBER. DETERMINATION OF HARDNESS IN (IRHD) INTERNATIONAL RUBBER HARDNESS DEGREES
BS 903-C4:1957 Methods of testing vulcanized rubber. Determination of lelectric strength of insulating soft vulcanized rubber and ebonite
09/30193391 DC BS ISO 7619-1. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method (Shore hardness)
07/30164021 DC BS ISO 27588. Rubber, vulcanized or thermoset. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
AS 1180.9B:1973 Methods of test for hose made from elastomeric materials, Method 9B: Hardness of vulcanized rubbers of low hardness (10 to 35 IRHD)
BS 6057-3-3.11:1984 Rubber latices. Methods of test-Determination of viscosity of rubber latices.
AS 1180.9C:1973 Methods of test for hose made from elastomeric materials, Method 9C: Hardness of vulcanized rubbers of high hardness (85 to 100 IRHD)
BS 7164-28-28.2:1990 Chemical tests for raw and vulcanized rubber. Methods for determination of copper content-Photometric method
AS 1683.15:1976 Methods of test for elastomers - Indentation hardness of rubber and plastics by means of a durometer
BS 2782-3 METHOD 365D:1978 Methods of testing plastics. Mechanical properties-Determination of hardness of plastics and ebonite by the ball indentation method
DANSK DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
UNE 53580:1975 ELASTOMERS. RUBBER PLATES FOR SHOE SOLES OF HIGH HARDNESS. CHARACTERISTICS AND TEST METHODS
DANSK DS/ISO 48:2016 Rubber, vulcanized or thermoplastic – Determination of hardness (hardness between 10 IRHD and 100 IRHD)
AS 1180.9A:1973 Methods of test for hose made from elastomeric materials, Method 9A: Hardness of vulcanized rubbers of standard hardness (35 to 85 IRHD)
BS 2719:1956 Pocket type rubber hardness meters. Methods of use and calibration
BS 6057-3.11:1987 Rubber latices. Methods of test-Determination of viscosity of rubber latices
BS 2719:1975 Methods of use and calibration of pocket type rubber hardness meters
DIN ISO 7619-2 E:2011 Draft Document - Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method (ISO 7619-2:2010)
BS ISO 7619-1:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS ISO 27588:2008 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 7619-1:2004+A1:2008 Rubber, vulcanized or thermoplastic. Determination of indentation hardness-Durometer method (Shore hardness)
AENOR UNE 53580:1975 Elastomers. Rubber plates for shoe soles of high hardness. Characteristics and test methods.
BS EN ISO 868:1998 Plastics and ebonite. Determination of indentation hardness by means of a a durometer (Shore hardness)
06/30130350 DC ISO 48. Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS 903-A57:1989 Physical testing of rubber-Determination of indentation hardness by means of pocket hardness meters
NS-EN ISO 868:1997 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985)
BS 6057-3-3.3:1985 Rubber latices. Methods of test-Determination of alkalinity of natural rubber latices
NS-EN ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
BS 6057-3-3.7:1982 Rubber latices. Methods of test-Determination of density of natural rubber latices
BS 903-C1:1956 Methods of testing vulcanized rubber. Determination of surface resistivity of insulating soft vulcanized rubber and ebonite
BS 7442-3-3.1:1991 Rubber or plastics covered rollers. Method of test-Determination of apparent hardness (IRHD method)
BS 7164-26-26.2:1990 Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content-Sodium periodate photometric methods
BS 903-C2:1956 Methods of testing vulcanized rubber. Determination of surface resistivity of insulating soft vulcanized rubber and ebonite
11/30212455 DC BS ISO 3387. Rubber. Determination of crystallization effects by hardness measurements
DIN ISO 27588 E:2014 Draft Document - Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2012)
AENOR UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
DIN ISO 48-4 E:2020 Draft Document - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018); Text in German and English
BS 7442-3.2:1991 Rubber or plastics covered rollers. Method of test-Determination of Shore hardness
DIN ISO 7619-1 E:2011 Draft Document - Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)
BS 6057-3-3.4:1990 Rubber latices. Methods of test-Determination of dry rubber content of natural rubber latices
BS ISO 7619-2:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness-IRHD pocket meter method
BS 6057-3-3.2:1992 Rubber latices. Methods of test-Determination of total solids content of rubber latices
BS 6057-3-3.2:1981 Rubber latices. Methods of test-Determination of total solids content of rubber latices
BS 6057-3-3.8:1981 Rubber latices. Methods of test-Determination of coagulum content of rubber latices
AS 1683.2:1974 Methods of test for rubber, Method 2: Solids content of latex
BS 6057-3.3:1990 Rubber latices. Methods of test-Determination of alkalinity of natural rubber latex concentrate
AS 1683.17:1981 Methods of test for rubber, Method 17: Vulcanized rubber - Determination of carbon black content - Pyrolytic method
BS 6057-3-3.13:1984 Rubber latices. Methods of test-Determination of sludge content of natural rubber latices
DIN ISO 48 E:2015 Draft Document - Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010); Text in German and English

British Standards Institution (BSI)

BS ISO 48-4:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - IRHD method
BS ISO 7267-1:2009 Rubber-covered rollers. Determination of apparent hardness. IRHD method
BS ISO 7267-1:2017 Rubber-covered rollers. Determination of apparent hardness. IRHD method
BS ISO 3387:2020 Rubber. Determination of crystallization effects by hardness measurements
BS ISO 3387:2012 Rubber. Determination of crystallization effects by hardness measurements
BS 903-A63:1995 Physical testing of rubber - Method for determination of crystallization effects by hardness measurements
BS EN 2432:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD
BS 903-A26:1995(2001) Physical testing of rubber — Part A26 : Method for determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS EN 2260:1995 Silicone rubber (VMQ) - Hardness 60 IRHD
BS EN 2431:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD
BS EN 2430:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD
BS EN 2261:1995 Silicone rubber (VMQ) - Hardness 70 IRHD
BS EN 2429:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD
BS EN 2428:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD
BS EN 2259:1995 Silicone rubber (VMQ) - Hardness 50 IRHD
BS ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Shore-type durometer method
BS ISO 7267-2:2009 Rubber-covered rollers. Determination of apparent hardness. Shore-type durometer method
BS ISO 48-7:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by Shore-type durometer method
BS ISO 19979:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS 903-A26:1995 Physical testing of rubber - Method for determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 48:2010 Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 48-3:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Dead-load hardness using the very low rubber hardness (VLRH) scale
BS 7164-28.2:1995 Chemical tests for raw and vulcanized rubber. Methods for determination of copper content. Photometric method
BS EN 2104:1996 Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD
BS 7164-27.2:1990 Chemical tests for raw and vulcanized rubber. Methods for determination of iron content. Photometric method
BS EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS ISO 27588:2012 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 48-6:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by IRHD method
BS ISO 7619-2:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. IRHD pocket meter method
BS ISO 27588:2009 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS 7442-3.1:1998 Rubber or plastics covered rollers - Method of test - Determination of apparent hardness (IRHD method)
17/30335305 DC BS ISO 7619-1. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method (Shore hardness). Part 1: Durometer method (Shore hardness)
BS 7442 Sec.3.2:1991 Rubber or plastics covered rollers. Method of test. Determination of Shore hardness
BS ISO 48-8:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by Pusey and Jones method
19/30371102 DC BS ISO 3387. Rubber. Determination of crystallization effects by hardness measurements
BS ISO 48-5:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by IRHD pocket meter method
BS ISO 18517:2008 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
BS ISO 18517:2015 Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
BS EN 2259:1995(1999) Silicone rubber (VMQ) — Hardness 50 IRHD
BS EN 2260:1995(1999) Silicone rubber (VMQ) — Hardness 60 IRHD
BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
BS ISO 7780:1998(2010)*BS 7164-26.2:1998 Rubber and rubber lattices — Determination of manganese content — Sodium periodate photometric methods
BS ISO 7780:1998 Rubber and rubber latices. Determination of manganese content. Sodium periodate photometric methods
BS ISO 19983:2017 Rubber. Determination of precision of test methods
BS EN 2841:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 60 IRHD
BS 903-A21.1:1997 Physical testing of rubber. Determination of rubber to metal bond strength. Adhesion to rigid substrates. 90 peel method

RO-ASRO

STAS 5441/1-1974 VULCANIZED ELASTOMERES Determination of hardness expressed in International Rubber Hard Degree
STAS 5441/3-1975 VULCAN IZED RUBBERS Determination cf hardness of vulcanizcd rubbers cf high hardness
STAS SR ISO 868:1995 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

Association Francaise de Normalisation

NF T46-029:1976 Vulcanized rubbers of high hardness (85 to 100 irhd). Determination of hardness.
NF ISO 48-4:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 4: penetration hardness by the durometer method (Shore hardness)
NF T46-028:1976 Vulcanized rubbers of low hardness (10 to 35 irhd). Determination of hardness.
NF T46-003-4*NF ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4 : indentation hardness by durometer method (Shore hardness)
NF T47-404-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1 : IRHD method.
NF T46-003-7*NF ISO 48-7:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7 : apparent hardness of rubber-covered rollers by Shore-type durometer method
NF T46-052-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1 : durometer method (Shore hardness).
NF T46-003-5*NF ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5 : indentation hardness by IRHD pocket meter method
NF T46-003-6*NF ISO 48-6:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6 : apparent hardness of rubber-covered rollers by IRHD method
NF T46-052-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2 : IRHD pocket meter method.
NF T46-027:2012 Rubber - Determination of crystallization effects by hardness measurements
NF T46-025:1981 Rubber. Determination of stiffness of vulcanized rubber (cehemann test).
NF T46-003-3*NF ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3 : dead-load hardness using the very low rubber hardness (VLRH) scale
NF T46-003-8*NF ISO 48-8:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8 : apparent hardness of rubber-covered rollers by Pusey and Jones method
NF ISO 48-6:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 6: apparent hardness of rubber-coated cylinders by the DIDC method
NF ISO 3387:2020 Rubber - Determination of the effects of crystallization using hardness measurements
NF ISO 48-7:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 7: apparent hardness of rubber-coated cylinders by the Shore type durometer method
NF T46-052:1988 Vulcanized or thermoplastic rubber. Determination of identation hardness by means of type shore pocket hardness meters.
NF EN ISO 868:2003 Plastics and ebonite - Determination of penetration hardness using a durometer (Shore hardness)
NF T46-003:2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD).
NF T46-027:1976 Rubbers. Determination of crystallization effects by hardness test.
NF T51-174:1998 Plastics and ebonite. Determination of identation hardness by means of a durometer (Shore hardness).
NF ISO 48-8:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 8: apparent hardness of rubber-coated cylinders by the Pusey and Jones method
NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
NF T47-404-3:2012 Rubber-covered rollers - Determination of apparent hardness - Part 3 : Pusey and Jones method.
NF T46-003-9*NF ISO 48-9:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9 : calibration and verification of hardness testers
NF ISO 19983:2022 Rubber - Determination of the precision of test methods
NF T47-404-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2 : Shore-type durometer method.
NF T40-027:2006 Rubber and rubber products - Determination of the sensitivity of test methods.
NF ISO 48-5:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 5: penetration hardness by the pocket durometer method calibrated in DIDC
NF T46-003-2*NF ISO 48-2:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2 : hardness between 10 IRHD and 100 IRHD
NF L17-010*NF EN 3697:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD
NF L17-013*NF EN 2838:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD
NF L17-311*NF EN 2837:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD.
NF EN ISO 21509:2015 Plastiques et ébonite - Vérification des duromètres Shore
NF T51-123*NF EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers
NF L17-011*NF EN 3698:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD
XP T47-814:2007 Rubber bearings - Determination of apparent Shore A hardness using a pocket durometer
NF L17-006*NF EN 2843:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD

Japanese Industrial Standards Committee (JISC)

JIS K 6253-3:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6253-3:2023 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6253-2:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 2: IRHD method (hardness between 10 IRHD and 100 IRHD)
JIS K 6253:1997 Hardness testing methods for rubber, vulcanized or thermoplastic
JIS K 6253:2006 Rubber, vulcanized or thermoplastic -- Determination of hardness
JIS K 6253-4:2012 Rubber, vulcanized or thermoplastic.Determination of hardness.Part 4: IRHD pocket meter method
JIS K 6253-5:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 5: Calibration and verification of hardness testers

CZ-CSN

CSN 62 1431-1993 Rubber, plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
CSN 62 1433-1981 Vulcanized rubbers. Determination of hardness. (Hardness between 30 and 85 IRHD)
CSN 62 1432-1980 Determination oí frardness o? vulcanized rubber by the meihod Shore D
CSN 62 1557-1965 Measuring of low - tempera ture stiffen ing of rubber and rubber-like materials by means of a torsional wire apparatus
CSN ISO 8053:1993 Rubber and latex. Determination of copper content. Photometric method
CSN 72 2348-1983 Testing of caulking compounds for building purposes. Indentation hardness of elastomeric sealants by means of durometer by Shore a

SE-SIS

SIS 16 22 01-1962 Rubber. Determination of hardness
SIS 16 22 23-1974 Rubber. Determination of low hardness (10 — 35 IRHD)
SIS 16 22 24-1974 Rubber. Determination of high hardness (85 — 100 IRHD)
SIS SS 16 14 14-1983 Plastics and ebonite - Determination of temperature of deflection under load
SIS SS-ISO 75:1988 Plastics and ebonite — Determination of temperature of deflection under load

GSO

BH GSO ASTM D1415:2022 Standard Test Method for Rubber Property—International Hardness
GSO ASTM D1415:2021 Standard Test Method for Rubber Property—International Hardness
OS GSO ISO 27588:2013 Rubber, vulcanized or thermoplastic -- Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
OS GSO ISO 3387:2015 Rubber -- Determination of crystallization effects by hardness measurements
GSO ISO 3387:2015 Rubber -- Determination of crystallization effects by hardness measurements
GSO ISO 48:2015 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BH GSO ISO 868:2016 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
OS GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
GSO ISO 7780:2015 Rubbers and rubber latices -- Determination of manganese content -- Sodium periodate photometric methods
OS GSO ISO 7619-1:2014 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
GSO ISO 7619-1:2014 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
BH GSO ISO 48-9:2022 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers
GSO ISO 48-9:2021 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers
OS GSO ISO 7780:2015 Rubbers and rubber latices -- Determination of manganese content -- Sodium periodate photometric methods
OS GSO ISO 18517:2014 Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide
GSO ISO 19004:2014 Rubber and rubber products -- Determination of the sensitivity of test methods
OS GSO ISO 19004:2014 Rubber and rubber products -- Determination of the sensitivity of test methods
OS GSO ISO 8053:2006 RUBBER AND LATEX – DETERMINATION OF COPPER CONTENT – PHOTOMETRIC METHOD
OS GSO ISO/TR 16314:2013 Rubber - Measurement of the aromaticity of oil in reclaimed rubbers
GSO ISO 8053:2006 RUBBER AND LATEX – DETERMINATION OF COPPER CONTENT – PHOTOMETRIC METHOD
GSO ISO/TR 16314:2013 Rubber - Measurement of the aromaticity of oil in reclaimed rubbers

HU-MSZT

MSZ 494-1967 Rubber hardness test
MNOSZ 13594-1955 Determination of bending hardness of hard rubber
MSZ KGST 1198-1978 Determination of hardness of type A rubber
MI 14026/8-1971 Rubber belt testing. Extension hardness testing

PK-PSQCA

PS 413-1964 DETERMINATION OF HARDNESS OF RUBBERS

International Organization for Standardization (ISO)

ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD); Determination of hardness
ISO 2783:1975 Ebonite — Determination of hardness by means of a durometer
ISO 48:2007 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 7267-1:1997 Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method
ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 48-7:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD); Determination of hardness
ISO 7619-1:2004 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 48:1979 Vulcanized rubbers; Determination of hardness (Hardness between 30 and 85 IRHD)
ISO 48-6:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6: Apparent hardness of rubber-covered rollers by IRHD method
ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method
ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method
ISO 2039:1973 Plastics and ebonite — Determination of hardness by the ball indentation method
ISO 3387:2012 Rubber - Determination of crystallization effects by hardness measurements
ISO 3387:1994 Rubber - Determination of crystallization effects by hardness measurements
ISO 3387:2020 Rubber — Determination of crystallization effects by hardness measurements
ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 7267-1:1986 Rubber-covered rollers; Determination of apparent hardness; Part 1 : IRHD method
ISO 48-8:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
ISO 7619:1997 Rubber - Determination of indentation hardness by means of pocket hardness meters
ISO 48:1994 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD)
ISO 7619:1986 Rubber; Determination of indentation hardness by means of pocket hardness meters
ISO 7267-2:1986 Rubber-covered rollers; Determination of apparent hardness; Part 2 : Shore-type durometer method
ISO 7619-2:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
ISO 48:1994/Amd 1:1999 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD); Amendment 1
ISO 27588:2008 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 27588:2012 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 7619-1:2004/Amd 1:2008 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness); Amendment 1: Precision data
ISO 868:1985 Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 2474:1972 Ebonite; Determination of crushing strength
ISO 48-2:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 48-9:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers
ISO 18898:2012 Rubber - Calibration and verification of hardness testers
ISO 18898:2016 Rubber - Calibration and verification of hardness testers
ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2: Shore-type durometer method
ISO 3387:1994/Cor 1:2000 Rubber - Determination of crystallization effects by hardness measurements; Technical Corrigendum 1
ISO 7780:1998 Rubber and rubber latices - Determination of manganese content - Sodium periodate photometric methods
ISO 19004:2004 Rubber and rubber products - Determination of the sensitivity of test methods
ISO 7780:1987 Rubbers and rubber latices; Determination of manganese content; Sodium periodate photometric methods
ISO/DIS 19983:2023 Rubber — Determination of precision of test methods
ISO 19983:2017 Rubber - Determination of precision of test methods
ISO 7619-2:2004 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
ISO 2473:1972 Ebonite — Determination of cross-breaking strength
ISO 19983:2022 Rubber — Determination of precision of test methods
ISO 8053:1986 Rubber and latex; Determination of copper content; Photometric method
ISO 8053:1995 Rubber and latex - Determination of copper content - Photometric method
ISO/TR 9272:2005 Rubber and rubber products - Determination of precision for test method standards

Danish Standards Foundation

DS/ISO 1818:1979 Vulcanized rubber of low hardness (10 to 35 IRHD). Determination of hardness
DS/ISO 1400:1979 Vulcanized rubbers of high hardness (85 to 100 IRHD). Determination of hardness
DS/ISO 48:1989 Vulcanized rubbers. Determination of hardness (Hardness between 30 and 85 IRHD)
DS/ISO 7267/1:1987 Rubber covered rollers. Determination of apparent hardness. Part 1: IRHD method
DS/ISO 7619:1989 Rubber. Determination of indentation hardness by means of pocket hardness meters
DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DS/ISO 7267/2:1987 Rubber covered rollers. Determination of apparent hardness. Part 2: Shore durometer method

German Institute for Standardization

DIN ISO 48:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:1994 + Amd. 1:1999)
DIN ISO 48-8:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method (ISO 48-8:2018)
DIN ISO 7619-1:2012 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)
DIN 53541:1980 Rubber; determination of crystallization effects by hardness measurements
DIN ISO 48-8:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method (ISO 48-8:2018)
DIN ISO 48-3:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN ISO 48-4:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN EN ISO 868:2003-10 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN ISO 48-3:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN EN 2429:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD; German version EN 2429:1995
DIN EN 2431:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD; German version EN 2431:1995
DIN EN 2430:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD; German version EN 2430:1995
DIN ISO 48-4:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN ISO 27588:2014 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2012)
DIN EN 2432:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD; German version EN 2432:1995

AENOR

UNE-ISO 7619-1:2011 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
UNE-ISO 48:2008 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
UNE 53637:1993 RUBBERS AND RUBBER LATICES. DETERMINATION OF MANGANESE CONTENT. SODIUMPERIODATE PHOTOMETRIC METHODS.
UNE 53636:1991 RUBBER AND LATEX. DETERMINATION OF COPPER CONTENT. PHOTOMETRIC METHOD.

TR-TSE

TS 2611-1977 EBON?TE - DETERMINATION OF HARDNESS BY MEANS OF A DUROMETER
TS 2401-1976 PLATICS AND EBON?TE — DETERMINATION OF HARDNESS BY THE BALL INDENTATION METHOD
TS 2875-1977 Vulcanized Rubbers of Low Hardness (10 To 35IRHD) Determination of Hardness
TS 2876-1977 Vulcanized Rubbers Of High Hardness (85 To 100 IRHD) Determination Of Hardness
TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength
TS 2708-1977 EBONITE - DETERMINATION OF CRUSHING STRENGTH

KR-KS

KS M ISO 7619-1-2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 27588-2015 Rubber, vulcanized or thermoplastic－Determination of dead-load hardness using the very low rubber hardness(VLRH) scale
KS M ISO 48-2018(2023) Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
KS M ISO 868-2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 7619-2-2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method

YU-JUS

JUS G.S2.125-1986 Rubber. Determination of Indentation hardness of a durometer (hardness Shore A and D)
JUS G.S2.526-1984 Plastics and ebonite. Determination of hardness by the ball indentation method
JUS G.S2.527-1984 Plastics. Determination of hardness by the ball indentation method. Rockwell hardness
JUS G.S2.143-1986 Rubber. Determination of hardness by the ball indentation method (IRHD)

FI-SFS

SFS-ISO 868 E:1986 This standard is approved in English

VDI - Verein Deutscher Ingenieure

VDI/VDE 2616 Blatt 2-2000 Hardness testing of plastics and rubber
VDI/VDE 2616 Blatt 2-1986 Hardness testing of plastics and rubber
VDI/VDE 2616 Blatt 2-1996 Hardness testing of plastics and rubber

IL-SII

S.I.722-1968 TESTING OF HARDNESS OF VULCANIZED RUBBER

DIN

DIN ISO 27588:2010 Rubber, vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2008)
DIN ISO 48:2016 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010)

Indonesia Standards

SNI 06-4999-1999 Determination of hardness of vulcanized rubber by shore durometer
SNI ISO 18517:2012 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
SNI ISO 48:2012 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
SNI 06-1846-1990 Rubber roll hardness for tanning leather machine

IN-BIS

IS 3400 Pt.2-1980 Test methods for hardness of vulcanized rubber Part Ⅱ

PL-PKN

PN C04260-1954 Rubber marking the softening point of hard rubber using the Vicata method
PN C04237-05-1991 Rubber test methods at Iow temperatur? Determination of stiffening (Gehman test)
PN C94126-1966 Schedule of tolerances for products in rubber and ebonite

VN-TCVN

TCVN 4502-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer (Shore hardness)

TH-TISI

TIS 2245-2005 Plastics and ebonite.determination of indentation hardness by means of a durometer (shore hardness)

European Committee for Standardization (CEN)

EN ISO 868:1997 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) ISO 868: 1985
prEN 667-1992 Rubber floor coverings; determination of indentation hardness by means of a durometer (Shore A hardness)
EN 2838:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD
EN 2839:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN 2836:2012 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD
EN 3698:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD

BE-NBN

NBN T 31-002-1976 Vulcanized rubbers - indentation hardness by means of a Shore duro-meter
NBN T 31-001-1976 Vulcanized rubbers - Determination of hardness (hardness between 30 and 85 I.R.H.D.)
NBN T 40-108-1988 Plastics and ebonite - Determination of température of deflection under load