deuterium dilution

deuterium dilution, Total:417 items.

The international standard classification for "deuterium dilution" includes: Paints and varnishes , Solvents , Food additives , Radiation measurements , Fluorescent lamps. Discharge lamps .

The Chinese standard classification for "deuterium dilution" includes: Coating , Coating auxiliary materials , Synthetic food additives , Ionizating Radiation Measurement , Electric light source products , Basic standard and general method for coating .

Professional Standard - Medicine

YY 91104-1999 Diluter

Taiwan Provincial Standard of the People's Republic of China

CNS 7395-1981 Method of test for deuterium oxide
CNS 554-1986 Lacquer Thinner
CNS 886-1986 Method of Test for Lacquer Thinner
CNS 10447-1983 Solvent Diluted Pust Preventive Oil
CNS 3233-1980 Dope Thinner
CNS 7155-1981 Deuterium oxide

Group Standards of the People's Republic of China

T/HEBQIA 114-2022 Alkyd thinner
T/QGCML 3254-2024 Mixing device for diluent processing
T/CNFIA 192-2024 low deuterium water
T/QGCML 3904-2024 Mixing and diluting device for shampoo production
T/SHZSAQS 00131-2022 Technical regulations for dilution and storage of fresh sheep essence
T/TAIA 003-2024 Chemical reagent—Determination of deuteration ratio of deuterated chloroform—1H NMR method
T/CHBAS 53-2024 Gases for Electronic Industry Deuterated Ammonia
T/HEBQIA 062-2022 Alkyd thinner
T/CEMIA 019-2019 Thinner for display panels
T/BPCT 001-2024 Determination of the degree of deuteration in deuterated chloroform—Nuclear magnetic resonance spectroscopy
T/CASME 1483-2024 Specification for the use of diluents of poultry semen
T/HBSX 005-2024 Low Deuterium Health Water
T/GDL 4-2023 Packaged drinking water（Deuterium depleted water）

工业和信息化部

HG/T 3378-2022 Thinner for coatings

Professional Standard - Chemical Industry

HG/T 3378-1987 Thinner For Nitrocellulose Lacquer
HG/T 3380-1987 Thiner for amino paint
HG/T 3861-2006 Methods of test for dilution ratio of thinners and anti - Blushing agents
HG/T 3379-2003 Thiner for Perchlorvinyl Paint
HG/T 3858-2006 Determination of water of thinners and retarders
HG/T 3380-2003 Thiner for amino paint
HG/T 3379-1987 Thinner For Chlorinated Polyvinyl Chloride Paints
HG 2684-1995 Food Additives - Diluted Benzoyl Peroxide
HG/T 3859-2006 Method for blushing test of thinners and anti - Blushing agents
HG/T 3378-2003 Thiner for nitrocellulose lacquer
HG/T 3860-2006 Method of test for evaporation rate of thinners and anti - Blushing agents

Military Standard of the People's Republic of China-General Armament Department

GJB 295A-2004 Deuterium Oxide Specification
GJB 295-1987 Deuterium oxide

中国石油化工总公司

SH 0354-1992 Solvent-diluted anti-rust oil

Professional Standard - Speciality

ZB G52001-1987 X-1, X-2 nitro lacquer thinner
ZB G52003-1987 X-4 amino paint thinner
ZB G52002-1987 X-3 perchlorethylene paint thinner

轻工业部

QB 1116.3-1991 Instrument bulb deuterium lamp

National Metrological Technical Specifications of the People's Republic of China

JJF 2066-2023 Calibration Specification for Aerosol Diluters
JJF 1267-2010 Primary method of isotope dilution mass spectrometry

Professional Standard - Light Industry

QB/T 1116.3-1991 Instrument Lamps - Deuterium Lamps
QB/T 1116.3-2008 Instrument lamps-Deuterium lamps

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 2508-2022 Cashmere Goat Fresh Essence Diluent Formula

未注明发布机构

DIN 12838 E:2020-12 Dilution pipette, Demeter type 1.1
DIN 12839 E:2020-12 Dilution pipette, Demeter type 2.2

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 19825-2005 Food additive-Diluted benzoyl peroxide
GB/T 1755-1979 Method of test for coloid ratio of thinnersand anti-blushing agents
GB/T 1753-1979 Method of test for evaporation rate of thinners and anti-blushing agents
GB/T 1722-1992 of colour of varnishes, boiled oils and thinners
GB/T 1752-1979 Method for blushing test of thinners and anti-blushing agents
GB/T 1751-1992 Determination of water of thinners and retarders

Professional Standard - Environmental Protection

HJ 1182-2021 Water quality—Determination of colority—Dilution level method

(U.S.) Ford Automotive Standards

FORD SK-M14J9561-A-1995 THINNER
FORD ESK-M14J512-A1-1988 THINNER
FORD SK-M14J9550-C-1994 THINNER
FORD SK-M14J9573-B-1994 THINNER
FORD S-M14J4500-A-1994 THINNER
FORD ESK-M14J233-A-1994 THINNER
FORD SK-M14J9571-A-1994 THINNER
FORD S-M14J210-A-1994 THINNER
FORD ESK-M14J250-A-1990 THINNER
FORD SK-M14J9571-B-1994 THINNER
FORD WSK-M14J243-A-1990 THINNER
FORD WSS-M14J519-A-1998 FADE OUT THINNER
FORD M14J200-A-1991 AROMATIC HYDROCARBON THINNERS
FORD WSS-M14J521-A1-1998 PRIMER THINNER
FORD ESK-M14J229-A-1994 THINNER, FOR BASECOAT
FORD WSA-M62J31-A-1992 ENAMEL, WATER REDUCED
FORD WSS-M14J520-A-1998 RETARDER THINNER
FORD M14J504-A-1990 THINNER - EXEMPT ENAMEL
FORD M14J100-A-1991 ALIPHATIC HYDROCARBON THINNERS
FORD WSS-M14J514-A-1997 SOLVENT, AROMATIC HYDROCARBON, THINNER
FORD ESK-M14J232-A-1994 THINNER, MIXTURE OF MIBK AND DIACETONEALCOHOL, DILUTION OF PAINTS
FORD WSK-M14J248-A-1990 SOLVENT, NITROCELLULOSE THINNER
FORD WSK-M14J247-A-1997 SOLVENT, NITROCELLULOSE THINNER
FORD ESK-M14J512-A1-2012 THINNER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD M14J506-A-1990 ENAMEL REDUCER - HIGH EFFICIENCY ACRYLIC
FORD SK-M14J9561-D-1995 THINNER, RECYCLING BASECOAT, SOLID COLOUR AND CLEARCOAT, DILUTION OF PAINT (Shown on SK-M14J9561-A)
FORD ESK-M14J512-A2-1988 THINNER Shown on ESK-M14J512-A1
FORD ESK-M14J250-A2-1990 THINNER (Shown on ESK-M14J250-A)
FORD SK-M14J9561-B-1995 THINNER (Shown on SK-M14J9561-A)
FORD SK-M14J9561-C-1995 THINNER (Shown on SK-M14J9561-A)
FORD M14J147-1991 ALIPHATIC HYDROCARBON THINNERS (Shown on M14J100A)
FORD WSS-M14J521-A2-1998 PURGE THINNER (Shown on WSS-M14J521-A1)

HU-MSZT

MSZ 7480-1961 Thinner
MSZ 09 80 015-1972 paint thinner
MSZ 8576-1959 fat thinner
MSZ 3268-1965 diluted bitumen
MSZ 1584/4-1981 dilute melting agent
MNOSZ 19958-1955 Sampling and inspection of diluted bitumen
MSZ 1584/7-1979 Diluted synthetic industrial melting agent
MSZ 1584/2-1981 Dilute industrial melting agent properties
MSZ MI-05 22.660/3-1972 MI-05 22.660/3-72 Manual paint thinning
MSZ 10196/1.lap-1962 Viscosity detection of plastics in diluent
MSZ 11073-1962 to dilute mineral acid and lye solutions

TH-TISI

TIS 865-2001 Cut.back asphalt
TIS 1318-2009 Retarded thinner
TIS 496-2010 Lacquer thinner
TIS 496-1983(en) LACQUER THINNER
TIS 520-2010 Nitrocellulose lacquer thinner
TIS 520(1)-1984(en) AUTOMOTIVE NITROCELLULOSE LACQUER THINNER

SCC

AS 2157:1978 Cutback bitumen
AS 2157:1980 Cutback bitumen
CAN/CGSB-1.4-2000 Petroleum Spirits Thinner
MIL MIL-P-87897-1982 PROPELLANT, DEUTERIUM
CAN/CGSB-1.110-M91-1991 General Purpose Thinner For Lacquers
CAN/CGSB-1.70-1999 High-Solvency Thinner
HOLDEN HN 1057-2001 Kaylo Thinner No. 300
AENOR UNE 48162:1962 THINNERS FOR SYNTHETIC ENAMELS
CAN/CGSB-1.4-1992 Thinner, mineral spirits
CAN/CGSB-1.70-M91-1991 Thinner with high solvent power
CAN/CGSB-16.1-M89-1989 Cutback bitumen for roads
HOLDEN HN 1573-2001 Diluent for Anti-Friction Coating
CAN/CGSB-1.197-1992 Thinner for Epoxy Coatings
CAN/CGSB 1.4-2000 Diluant, essence minerale
CAN/CGSB-1.124-1993 Thinner for Vinyl Coatings
CAN/CGSB 1.70-1999 Thinner with high solvent power
CAN/CGSB 1.94-M89-1989 Thinner, xylene (xylol)
AENOR UNE 48085:1985 Water in solvents and diluents.
CAN/CGSB-1.5-M91-1991 Low Flash Petroleum Spirits Thinner
BS 5082:1974 Specification for water-thinned priming paints for wood
CAN/CGSB-1.94-M89-1989 Thinner, xylene (xylol)
NS 4749:1979 Biological oxygen demand, BOD — Dilution method
UNE-EN 14733:2006 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
CAN/CGSB-1.124-1999 Thinner for vinyl resin coatings
UNE-EN 14733:2006+A1:2011 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
NS-EN 14733:2005 Bitumen and bituminous binders — Bituminous emulsions, fluxed and cut-back bitumen factory production control
INT 29-1948 Thinner for Primer, Metal, Zinc Chromate
ASTM D597-46 Specification for Cut-Back Asphalt (Rapid Curing Type)
MIL MIL-T-81772B-1986 THINNER, AIRCRAFT COATING (SUPERSEDING MIL-T-81772A)
DIN 12839 E:2020 Draft Document - Dilution pipette, Demeter type 2.2
NS-EN 15626:2009 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
CAN/CGSB 1.110-M91-1991 Thinner for general use, for lacquer products
DIN 12838 E:2020 Draft Document - Dilution pipette, Demeter type 1.1
AASHTO M 82-1975(2012) Standard Specification for Cutback Asphalt (Medium-Curing Type)
CAN/CGSB 1.124-1999 Diluant pour revetements aux resines vinyliques
NS-EN 15626:2016 Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
AASHTO M 82-2017(2021) Standard Specification for Cutback Asphalt (Medium-Curing Type)
DANSK DS/EN 15626:2016 Bitumen and bituminous binders – Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test – Aggregate method
AENOR UNE 41106:1970 Fluidized bitumens ("cut-back") of the rapid curing type.
AENOR UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesion of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
UNE-EN 15626:2009 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
AENOR UNE 41105:1970 Fluidized bitumens ("cut-back"), medium curing type.
NS-EN 14896:2006 Bitumen and bituminous binders — Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders — Rotating spindle viscometer method

CZ-CSN

CSN 67 3150 Cast.03-1975 Dilulion ability
CSN 67 5839-1980 Thinner S 6900 for p^ints
CSN 67 5811-1980 Thiímer H 6000 for paints
CSN 67 5832-1980 Thinner S 6017 for paints
CSN 67 5825-1980 Thinner S 6006 for paints
CSN 65 7205-1977 Cut - back aaphalts for roads
CSN 67 5814-1980 Thinner C 6002 for palnts
CSN 67 5820-1980 Thinner S 6001 for paints
CSN 67 5834-1980 Thinner S 6023 for paints
CSN 67 5824-1980 Thinner S 6005 for paints
CSN 67 5823-1980 Thinner S 6004 for pnints
CSN 67 5821-1980 Thinner S 6002 for pnints
CSN 67 5829-1980 Thinner S 6010 for paints
CSN 67 5822-1980 Thinner S 6003 for paints
CSN 65 1171-1986 Diluted phosphoric acid for industrial use
CSN 67 5833-1980 Thinner S 6019 for paints
CSN 67 5819-1980 Thinner L 6000 for paints
CSN 67 5817-1980 Thinner C 6013 for paints
CSN 67 5816-1980 Thinncr C 6004 for paints
CSN 67 5813-1980 Thinner C 6001 forpaints
CSN 67 5841-1980 Thinner U 6000 for paints
CSN 67 5838-1980 Thinner S 6706 for paimts
CSN 67 5818-1980 Thinner C 6020 forpaints
CSN 67 5831-1980 Thinner S 6QI4 for pninls
CSN 67 5836-1980 Thinner S 6301 for painls
CSN 67 5840-1980 Thínner S 6904 for paints
CSN 67 5826-1980 Thinner S 6007 for painls
CSN 67 5827-1980 Thinner S 60Ofi fnrpnints
CSN 67 5812-1980 Thinner C 6000 for paints
CSN 67 5810-1980 Thlnner B 6000 for aints
CSN 67 5837-1980 Thinner S 6302 for painLs
CSN 67 5835-1980 Thinner S 6300 forpainls
CSN 67 5830-1980 Thinner S 6013 forpaínls
CSN 67 5815-1980 Thinner C 6003 for paints
CSN 67 5828-1980 Thinner S 60O9 for paints
CSN 67 5842-1980 Thinner U 6002 f o palnts
CSN ON 67 5450-1964 Thinner for ehlorinated rubber paints
CSN 65 7079-1983 Test for volatility of cut-back asphalts
CSN ON 67 3650-1961 Thinner 6000 for oil paints
CSN 67 5251-1959 Thinner. L6001 for paint L 1002
CSN 65 7083-1981 Distillation of Cut - Back asphaltic /bítuminous/ products
CSN 67 4701-1960 Speciál thinner C 6001 for itrocellulose paints
CSN 64 0363-1982 Polyamides. Determination of the vis- osity number in dilute solution
CSN 67 5801-1980 Thinn-ers for paínts. asic and generál equirements
CSN 67 4255-1961 Thinner S 6005 for synthetic painta for ight metala
CSN 67 4254-1960 Thinner S 6004 for paints S 1004 nd S 2016

Korean Agency for Technology and Standards (KATS)

KS M 2202-2021 Cutback asphalt
KS M 2202-2016(2021) Cutback asphalt
KS M 2202-2016 Cutback asphalt
KS M 5469-1984 Test methods for THE DILUTABILITY and DILUTABILITY stability OF paint
KS M 5803-1983 Thinner for Primer paint
KS M 6060-2005 Thinner for organic coating materials
KS M 6060-2019 Thinner for organic coating materials
KS M 2212-2016(2021) Corrosion preventive oils solvent dilution
KS M 6060-2014 Thinner for organic coating materials
KS M 2212-2011 Corrosion preventive oils solvent dilution
KS M 0120-2009 General rule for dilution methods of standard solutions
KS M 2212-2016 Corrosion preventive oils solvent dilution
KS M 5801-1983 Thinner for synthetic resin enamel
KS M 0120-2019 General rule for dilution methods of standard solutions
KS M 6060-2009 Thinner for organic coating materials
KS M 5802-1983 Thinner for Cashew resin Enamel
KS M 6060-2014(2019) Thinner for organic coating materials
KS M 5723-1997 THINNER FOR ACRYL RESIN ENAMEL
KS M 5723-1997(2002) THINNER FOR ACRYL RESIN ENAMEL
KS M 5723-2004 THINNER FOR ACRYL RESIN ENAMEL
KS M 5468-1984 Test methods for dilution of components in lacquer
KS M 2257-2007(2022) Testing method for distillation of cut-back asphaltic products
KS M 2257-2022 Testing method for distillation of cut-back asphaltic products
KS M 2257-1982 Testing method for distillation of cut-back asphaltic products
KS B ISO 8655-4:2017 Piston-operated volumetric apparatus－Part 4：Dilutors
KS M 2110-2011 Testing method for diluted pour point of lubricating oil for aircraft reciprocating engine
KS M 2110-1986 Testing method for diluted pour point of lubricating oil for aircraft reciprocating engine
KS M 5553-1984 Test methods for ester keton contents of Thinner for lacquer
KS B ISO 8655-4-2017(2022) Piston-operated volumetric apparatus－Part 4：Dilutors

U.S. Air Force

AIR FORCE MIL-P-87897 VALID NOTICE 1-1988 PROPELLANT, DEUTERIUM
AIR FORCE MIL-P-87897-1982 PROPELLANT, DEUTERIUM
AIR FORCE MIL-P-87897 ADMIN. NOTICE 3-2005 PROPELLANT, DEUTERIUM

Society of Automotive Engineers (SAE)

SAE AMS3170F-2005 THINNER Alcohol-Ester
SAE AMS3170E-1995 THINNER Alcohol-Ester
SAE AMS3170D-1978 THINNER Alcohol-Ester
SAE AMS3170B-1953 THINNER Alcohol - Ester
SAE AMS3170C-1968 THINNER Alcohol - Ester
SAE AMS3170A-1952 THINNER Alcohol - Ester
SAE AMS3170-1948 THINNER Alcohol - Ester
SAE AMS3180-1940 TOLUENE THINNER Commercial
SAE AMS3180B-1952 TOLUENE THINNER Commercial
SAE AMS3180A-1947 TOLUENE THINNER Commercial
SAE AMS3170F-1996 Thinner Alcohol-Ester
SAE AMS3180C-1963 TOLUENE THINNER Commercial
SAE AMS3430E-2014 Brazing Filler Metal, Paste, Copper, Water Thinning
SAE AMS3430D-2008 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430C-2006 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430C-2001 Brazing Filler Metal, Paste, Copper Water Thinning
SAE AMS3430B-1994 BRAZING FILLER METAL, PASTE, COPPER Water Thinning
SAE AMS3113-1945 Compound, Zinc Chromate, Sealing (Thinned) Hot Oil Resisting

United States Navy

NAVY TT-T-2935-2000 THINNER, PURGING
NAVY TT-T-2935 VALID NOTICE 1-2005 THINNER, PURGING
NAVY AN6004 REV 4-1971 REGULATOR - DILUTER DEMAND OXYGEN
NAVY MIL-R-6018 C-1966 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C NOTICE 1-1996 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C (1)-1971 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY AN4077 REV 1-1944 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
NAVY AN4077 REV 1 NOTICE 1-1960 FITTING - OIL DILUTION SYSTEM TWIN RESTRICTED TUBE
NAVY MS22062 REV F-1991 REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC, PRESSURE BREATHING
NAVY MS22062 REV F NOTICE 1-1997 REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC, PRESSURE BREATHING
NAVY QPL-16173-QPD-2013 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
NAVY QPL-16173-QPD-2010 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
NAVY QPL-16173-2010 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
NAVY QPL-16173-84 NOTICE 1-2008 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
NAVY MIL-R-25410 G-1991 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
NAVY MIL-R-25410 G NOTICE 1-1997 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
NAVY QPL-16173-2012 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
NAVY QPL-16173-2013 Corrosion Preventive Compound, Solvent Cutback, Cold-Application
NAVY QPL-16173-QPD-2011 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
NAVY QPL-16173-2011 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION

SAE - SAE International

SAE AMS3170G-2008 Thinner@ Alcohol-Ester
SAE AMS3430B-1990 Brazing Filler Metal@ Paste@ Copper Water Thinning
SAE AMS3430-1958 PASTE@ COPPER BRAZING Water Thinning
SAE AMS3430A-1983 BRAZING FILLER METAL@ PASTE@ COPPER Water Thinning

Japanese Industrial Standards Committee (JISC)

JIS K 5538:2002 Lacquer thinner
JIS K 5538:1995 Lacquer thinner

CH-SNV

SEV 3064-1965 dilution. quality regulations
SN 210 902/1-1984 Aluminium and aluminium alloys, wrought productsBarsTechnical conditions for delivery
VSM 12008-1972 mineral oil. Lubricating oil diluted with gasoline

PL-PKN

PN BN 6016-11-1966 Thinner. Ammonium sulfate
PN BN 6118-13-1964 Aurit paint thinner
PN BN 6118-20-1966 reactive pigment diluent
PN BN 6118-16-1965 121 BT/01 paint thinner
PN BN 6110-10-1964 Paint thinner. Sample selection
PN BN 6118-10-1963 Chlorinated rubber product thinner
PN BN 6118-21-1966 Epoxy asphalt product thinner
PN BN 6118-22-1966 Epoxy coating product thinner
PN BN 6118-04-1963 Paint MN-16 and TN-16 thinner
PN BN 6118-03-1963 Ethylene polymer product thinner
PN BN 6118-19-1966 Styrenic Paint Product Thinner
PN BN 6110-14-1965 Paint thinner. Ingredients and labeling
PN BN 6118-15-1965 Thermal Spray Nitrocellulose Paint Thinner
PN BN 6118-07-1963 Universal nitrocellulose product thinner
PN BN 6118-05-1963 Nitrocellulose Product Thinner No. 647
PN BN 6118-11-1963 Chemically hardened coating product thinners
PN BN 6118-09-1963 Asphalt paint and asphalt paint thinner
PN BN 6118-01-1963 Nitrocellulose Paint Thinner for Skin

IN-BIS

IS 217-1961 Specification for diluted bitumen
IS 454-1961 Specification for DIGBOI type diluted bitumen

GM Europe

GME L 000 0239-2013 Thinner A-I for clear coat (English/German)
GME B 040 0394-2011 Cleaning thinner for spray booths
GME L 000 0545-2004 Varnish Thinner A-II
GME B 040 0227-2010 Cleaning and rinsing thinner
GME B 440 0225-2013 Thinner for top and clearcoats (English/German)
GME B 040 1501-2014 Thinner for Spot-Repair (English/German)
GME B 040 1514-2010 Flushing and cleaning thinner
GME B 040 0980-2003 Dilute wetting agent (English/German)
GME L 000 0435-2003 Water Thinned Fuel Tank Paint (English/German)
GME L 000 0537-2008 Thinner for 2-component clear coat
GME L 000 0570-2013 Thinner for metaleffect base coat (English/German)

IL-SII

S.I.T.D.663-1967 DILUTED DTES FOR FOODSTUFFS

American Society for Testing and Materials (ASTM)

ASTM D2026-97(2004) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97(2004) Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2026-97 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027-97 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2399-83(2005) Standard Practice for Selection of Cutback Asphalts
ASTM D2399-83(1999) Standard Practice for Selection of Cutback Asphalts
ASTM D2026-97(2010) Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2026/D2026M-97(2010)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027/D2027M-10 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2027/D2027M-13 Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM E788-97(2013) Standard Specification for Pipet, Blood Diluting
ASTM E788-97(2008) Standard Specification for Pipet, Blood Diluting
ASTM E788-97(2003) Standard Specification for Pipet, Blood Diluting
ASTM D2028-97 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM E788-97(2019) Standard Specification for Pipet, Blood Diluting
ASTM D2028/D2028M-10 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM E788-97 Standard Specification for Pipet, Blood Diluting
ASTM D2028-97(2004) Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D402/D402M-24 Standard Test Method for Distillation of Cutback Asphalt
ASTM D2399-12 Standard Practice for Selection of Cutback Asphalts
ASTM D2026/D2026M-15(2021)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D2027/D2027M-19(2024) Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2399-21 Standard Practice for Selection of Cutback Asphalts

BR-ABNT

ABNT EB-96R-1956 alkyd enamel thinner
ABNT MB-230R-1956 Alkyd enamel diluent testing
ABNT EB-33-1945 Dilute lead chrome green. Brazilian specifications
ABNT EB-99-1968 Diluted asphalt concrete and residual oil
ABNT NBR 5765-2012 Diluted asphalt — Determinations of flashpoint — Tag open cup

Military Standards (MIL-STD)

DOD A-A-50812 A-1989 PIPET, BLOOD DILUTING
DOD A-A-54126-1990 PIPET-DILUENT, BLOOD, LABORATORY

GM North America

GM 9985231-1973 Copper Brazing Paste, Water Thinning
GM 9984478-1997 Purge Thinner - for Enamels
GM 9984036-1990 Purge Thinner - Reclaimed
GM 9984422-1990 Thinner - Mistcoat, for Waterborne Enamel
GM 9984454-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984466-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984431-1990 Reducing Solvents for Topcoats (Shown On 9984425)
GM 9984430-1990 Reducing Solvents for Topcoats (Shown On 9984425)
GM 9984495-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984462-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984500-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984424-1990 Thinner - Evaporation Loss for Solution Lacquer
GM 9984464-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984497-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9984493-1989 Purge Thinner for 9984111 Replaced by 9984478
GM 9984494-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984436-1990 Reducing Solvents for Topcoats (Shown on 9984425)
GM 9984499-1990 Reducing Solvents for Primers (Shown on 9984446)
GM 9985784-2014 Lubricant, Rubber (Nonwater Dilutable) (Issue 2)
GM 9985784-1993 Lubricant, Rubber (Nonwater Dilutable)

Canadian General Standards Board （CGSB)

CGSB 1.110-M91-CAN/CGSB CORR 1-1991 General Purpose Thinner for Lacquers
CGSB 1.70-99-CAN/CGSB-1999 Diluant A Pouvoir Solvant Eleve
CGSB 1.124-99-CAN/CGSB-1999 Thinner for Vinyl Coatings
CGSB 1.4-00-CAN/CGSB-2000 Petroleum Spirits Thinner

Association Francaise de Normalisation

NF X31-428-2*NF ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Part 2 : dissolution by alkaline fusion.
NF B35-206:1968 Laboratory glassware. Dilution pipettes.

KR-KS

KS M 2212-2022 Solvent dilution type rust preventive oils
KS B ISO 8655-4-2017 Piston-operated volumetric apparatus－Part 4：Dilutors

AR-IRAM

IRAM 6608-1959 Fast hardening diluted asphalt
IRAM 6610-1959 Medium speed hardening diluted asphalt
IRAM 6612-1959 Low speed hardening diluted asphalt
IRAM 6595-1956 Distillation test method for diluted bitumen
IRAM 6611-1959 How to determine the hardening index of diluted asphalt

German Institute for Standardization

DIN 12838:2021 Dilution pipette, Demeter type 1,1
DIN 12838:2021-08 Dilution pipette, Demeter type 1,1
DIN 12839:2021-08 Dilution pipette, Demeter type 2,2
DIN 12839:2021 Dilution pipette, Demeter type 2,2
DIN 12838:1964 Dilution pipette, Demeter type 1.1
DIN 12839:1964 Dilution pipette, Demeter type 2.2
DIN 12750:1969 Blood dilution pipettes for blood corpuscles counting
DIN 53238-24:1995 Pigments and extenders - Method for assessment of ease of dispersion - Part 24: Microscopic assessment of dispersions of pigments and extenders

GM Daewoo

GMKOREA EDS-M-8718-2007 ESTA CLEANING THINNER (VERSION: 4)
GMKOREA EDS-T-7680-2011 Solubility test of sound insulation pad diluent

YU-JUS

JUS H.P8.514-1986 Testing of pesticide?. Dilution stability
JUS U.M3.030-1996 Cutback asphalts for roads - Quality reguirements

Defense Logistics Agency

DLA DD-B-601-1959 BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITERS

AENOR

UNE 48085:1985 WATER IN SOLVENTS AND THINNERS
UNE 48097:2001 Paints and varnishes. Dilution stability.
UNE 48057:1960 CORROSION TEST, OF SOLVENTS AND DILUENTS
UNE 7149:1959 MODIFIED MIXIBILITY TEST OF WATER CUTBACKS.
UNE 7148:1959 MIXIBILITY TEST OF WATER AND COAGULATION CUTBACKS.

ES-AENOR

UNE 48-085-1985 Water in solvents and diluents
UNE 48 057 Corrosion testing of solvents and diluents
UNE 30 148 Analytical reagents. Perchloric acid (diluted to 70%) CI04HM 100,46

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1616-1981 Topcoat@ Water Reducible (Rev 1)
NAS1617-1981 Coating: High Temperature Resistant@ Water Reducible (Rev 1)

British Standards Institution (BSI)

BS EN ISO 8655-4:2022 Piston-operated volumetric apparatus - Dilutors
BS EN ISO 8655-4:2002 Piston-operated volumetric apparatus - Part 4:Dilutors

U.S. Military Regulations and Norms

ARMY MIL-P-53030 A (2)-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
ARMY MIL-P-53030 A-1992 PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD AND CHROMATE FREE
ARMY A-A-857 B VALID NOTICE 2-2009 Thinner, Dope and Lacquer (Cellulose Nitrate)

Indonesia Standards

SNI 06-6018-1999 Test method for gasoline diluent in used gasoline engine oils by distilation

NL-NEN

NEN 3905-1982 Bitumen and tar products - Cut-back bitumen

RO-ASRO

STAS 3122-1980 Paints and varnishes. THINNERS FOR NITROCELLULOSE ASE PRODUCTS
STAS 3123-1985 VABNISHES AND PAINTS Thinners for alkyde resin base products
STAS 52-1980 PETROLEUM DIEUENTS FOR T1M- BER PRESERVATION IMPREGNATES
STAS 3122-1985 VARNISHES AND PAINTS Thinners for nitrocellulose base preducts

General Motors Corporation (GM)

GM 9985555-1989 Lubricant, Tire Mounting, Prediluted

US-CFR-file

CFR 40-1065.240-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.240:Dilution air and diluted exhaust flow meters.

RU-GOST R

GOST 20909.1-1975 Non-diluted sperm of bulls. Method of sampling
GOST 11034-2018 Polyamides. Method for determination of the viscosity number of dilute solutions
GOST 32057-2013 Cutback bituminous products. Determination of distillation characteristics
GOST 11034-1982 Polyamides. Method for determination of the viscosity number of dilute solution

The American Road & Transportation Builders Association

AASHTO M 82-2017 Standard Specification for Cutback Asphalt (Medium-Curing Type)
AASHTO M 81-92(R2017) Standard Specification for Cutback Asphalt (Rapid-Curing Type)

TR-TSE

TS 122-1978 STANDARD METHOD OF DISTILLATION TEST FOR CUT-BACK ASPHALTIC PRODUCTS

CU-NC

NC 26-150-1986 Veterinary Drugs Glyoerate Diluent Teatine Methods
NC 26-75-44-1990 Drugs. Diluent Sauton Injection. Quality Süecifications

International Organization for Standardization (ISO)

ISO 8655-4:2022 Piston-operated volumetric apparatus — Part 4: Dilutors

Aerospace Industries Association

AIA NAS 1616-1981 (Inactive)Topcoat, Water Reducible (Rev. 1)

AASHTO - American Association of State Highway and Transportation Officials

M82-1975 Standard Specification for Cut-Back Asphalt (Medium-Curing Type)
M 82-1975 Standard Specification for Cutback Asphalt (Medium-Curing Type)

US-GSA

GSA A-A-857 B VALID NOTICE 1-2004 THINNER, DOPE AND LACQUER (CELLULOSE NITRATE)

ES-UNE

UNE-EN 15626:2016 Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method

FI-SFS

SFS 3019-1979 Determine the biochemical oxygen demand in water. dilution method