Determination method of heat sealer

Determination method of heat sealer, Total:407 items.

The international standard classification for "Determination method of heat sealer" includes: Hydraulic construction , Other materials for the reinforcement of composites , Testing of metals in general , Glass products , Cement. Gypsum. Lime. Mortar , Central heating systems , Coals , Binders. Sealing materials , Pesticides and other agrochemicals , Analytical chemistry , Insecticides , Integrated circuits. Microelectronics , Other equipment for petroleum and natural gas industries , Equipment for petroleum and natural gas industries .

The Chinese standard classification for "Determination method of heat sealer" includes: Other non-metal mine product , Metal physical and chemical property test method in general , Industrial technical glass , Cement , Coal analysis methods , Sealing material , Basic standards and general methods for pesticides , Basic standards and general methods , Heat supply and heating engineering , Material composition analysis instrument and environment detection instrument in general , Microcircuit in general , Thermal Measurement , Medical sanitary products , Petroleum drilling , Petroleum exploration, development, gathering and transportation equipment in general , Postal machinery , Postal packaging , Technical management .

Professional Standard - Water Conservancy

SL 123-1995 Method for calibration of cement mortar flow tester
SL 132-1995 Calibration method for vapor-pressure type air entrainment tester
SL/T 136-2017 Calibration method of concrete thermal parameter measuring instrument
SL/T 124-2014 Calibration method of cement hydration heat meter
SL 136-2017 SL/T 136-2017 (Calibration method for apparatus testing thermal parameters of concrete)
SL 124-1995 Ccalibration method for cement hydration heat (direct method) tester
SL 124-2014 Calibration methods for testing instrument of hydration heat of cement
SL 113-2014 Code for calibration of photoelectric fall cone liquid limit and plastic limit device
SL 113-1995 Calibration method for photoelectric liquid-plastic tester
SL 136-1995 Calibration method for concrete adiabatic temperature rise tester
SL 123-2012 Calibration methods for fluidity tester of cement mortar
SL/T 113-2014 Calibration method of photoelectric liquid plastic limit measuring instrument

National Metrological Technical Specifications of the People's Republic of China

JJF(纺织) 05A-1985 Verification method of Y412A raw cotton moisture meter
JJF(电子) 34-1982 Verification method of HL-12A comprehensive radar tester
JJF(航空) 036-1988 Verification method of pendulum weighing instrument for impact testing machine
JJF(电子) 36-1982 Verification method of ZCL-10B radar comprehensive tester
JJF(航空) 040-1988 Calibration method of thermoelectric comparator
JJF(纺织) 05-1985 Verification method of Y412 raw cotton moisture meter
JJF(电子) 17-1982 Calibration method of LCD-1 large inductance measuring instrument
JJF(纺织) 02-1985 Calibration method of Y145 air-flow fiber fineness tester
JJF(电子) 22-1982 Verification method of BT-3 frequency characteristic tester
JJF(电子) 13-1982 Calibration Method of CC-6 Small Capacitance Measuring Instrument
JJF(电子) 35-1982 Verification method of HL-6 comprehensive radar tester
JJF(电子) 24-1982 Verification method of 2K2-1 coaxial impedance measuring instrument

Professional Standard - Machinery

JB/T 6298-1992 Test method of determining combustion characteristics of coal with thermal analyzer
JB 5784-1991 Test methods for closed glow plugs
JB/T 5784-1991 Closed glow plug test method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31850-2015 Test method for thermogravimetry(TG) of no-matallic sealing materials
GB/T 12959-2024 Test methods for heat of hydration of cement
GB/T 19136-2021 Testing method of the accelerated storage stability at elevated temperature for pesticides
GB/T 213-1996 Determination of calorific value of coal
GB/T 213-2008 Determination of calorific value of coal
GB/T 44374-2024 Determination of performance of pressurized fluid extractor
GB/T 9338-1988 Method of instrumental measurement of whiteness of fluorescent whitening agents
GB/T 32266-2015 Method of performance testing for atomic fluorescence spectrometer
GB/T 13477.13-2002 Test method for building sealants Part 13: Determination of adhesion/cohesion properties at variable temperatures
GB/T 13754-2008 Test methods of thermal output of heating radiators
GB/T 43859-2024 Test method for performance of water activity meters
GB/T 213-2003 Determination of calorific value of coal
GB/T 1573-2001 Determination of thermal stability of coal
GB/T 13754-2017 Test methods of thermal output of heating radiators
GB/T 12959-1991 Test method for heat of hydration of cement－The heat of solution method
GB/T 13477.13-2019 Test method for building sealants—Part 13:Determination of adhesion/cohesion properties at variable temperatures
GB/T 12959-2008 Test methods for heat of hydration of cement
GB/T 14862-1993 Junction-to-case thermal resistance test methods of packages for semiconductor integrated circuits
GB/T 1573-2018 Determination of thermal stability of coal
GB/T 19136-2003 Testing method for the storage stability at elevated temperature of pesticides
GB/T 22638.7-2008 Test methods for aluminium and aluminium alloy foils - Part 7: Determination of heat seal strength
GB/T 9452-2003 Testing method for work zone of heat treatment furnace
GB/T 13754-1992 Test method of thermal output of heat emittor
GB/T 37991-2019 Measuring method for ultra-thin glass reheating line shrinkage—Dilatometer method
GB/T 22638.7-2016 Test methods for aluminium and aluminium alloy foils Part 7:Determination of heat seal strength

Professional Standard - Aviation

HBm 59-1987 Damp heat test method for miniature automobile instrument
HB 5367.7-1986 Method for Determination of Density of Carbon Graphite Sealing Materials
HB 5367.4-1986 Determination method for thermal oxidation weight loss of carbon graphite sealing materials
HBm 66.49-1990 Mini-truck - Damp Heat Test Method for Instrument
HB 5337-1986 Determination Method for Radial Force of Labiate Rubber Sealing Ring

National Metrological Verification Regulations of the People's Republic of China

JJG(烟草) 32-2023 Calibration procedures for cigarette packet sealing tester - Negative pressure extraction-water immersion method
JJG(烟草)32-2023 Verification Regulation of Cigarette Packet Seal Tester—Method of Pumping-water Immersion
JJG 463-1996 Melting-Point-Measuring Instruments with Thermo-Micro-Method

Professional Standard - Textile

FZ/T 01069-1999 Measuring method of yarn diameter CCD measuring instrument method

中国轻工总会

ZBW 0017-1989 Yarn diameter measurement method CCD measuring instrument method

Professional Standard - Medicine

YY/T 1432-2016 Test method for determination of heatsealability of flexible webs of medical devices as measured by seal strength

Hunan Provincial Standard of the People's Republic of China

DB43/T 2129-2021 Test method for trace carbon residual detector

Military Standard of the People's Republic of China-General Armament Department

GJB 337-1987 Determination method of nitrogen content of nitrocellulose (interferometer method)
GJB 8684.20-2015 Pyrotechnic performance test methods Part 20: Determination of infrared shielding time Infrared thermal imaging camera method
GJB 570.13-1988 Meteorological instrument final test method cloud meter
GJB 570.14-1988 Typical test methods for meteorological instruments Radiosonde
GJB 772.309-1993 Test Methods for Explosives Specific Heat Capacity Determination Microcaloric Calorimetry

未注明发布机构

EIA JEDEC JESD51-1995 Methodology for the Thermal Measurement of Component Packages (Single Semiconductor Device)

Professional Standard - Military and Civilian Products

WJ 2261-1994 Verification rules for thermal conductivity and infrared absorption nitrogen and oxygen detectors
WJ 2262-1994 Verification Regulations for Thermal Conductivity Meter

Group Standards of the People's Republic of China

T/CCASC 0035-2024 Testing of thermal stability of polyvinyl chloride resin- Thermogravimetric analyzer method
T/CMA YJ070-2024 Calibration Method for On-line Combustion Calorimeter
T/CMA 034-2021 Calibration method for salt content meters analyzers
T/HBJLXH 002-2022 Calibration Method of Geotextile water permeability tester
T/CMA HG109-2023 Calibration Method for On-line Dissolved Oxygen Analyzer
T/HBJLXH 003-2022 Calibration Method of Free calcium oxide analyzer
T/CMA 032-2021 Calibration method for automatic benzene crystal point testers
T/CMA 031-2021 Calibration method for basic nitrogen meters
T/GDCKCJH 043-2021 Performance requirements and test methods of mercury diffusion hydrogen tester
T/CMA 033-2021 Calibration method for distillation range testers of petroleum products
T/HBJLXH 003-2023 Calibration method for asphalt wax content tester

Professional Standard - Commodity Inspection

SN/T 5240-2020 Import and export textiles-Heat release rate-Test method of cone calorimeter method

Taiwan Provincial Standard of the People's Republic of China

CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer

Professional Standard - Petroleum

SY/T 6816-2010 Calibration Method of Equipment for Measuring Sand Content in Drilling Fluids
SY 6677-2007 Calibration Method of Drilling Fluid Solid Phase Quantity Meter
SY/T 7517-1994 Determination method of crude oil specific heat capacity adiabatic calorimetry
SY/T 7081-2016 Calibrating method for calibration device of geophone tester
SY/T 6588-2006 Calibration Methods for Electric Log Tools
SY/T 6677-2007 Calibration method of mnd retort assembly
SY 6816-2010 Calibration Method of Drilling Fluid Sand Content Meter
SY 6810-2010 Calibration method of rock gas permeability tester
SY/T 6677-2022 Calibration method of drilling fuid retort assembly
SY 7517-2010 Determination method of specific heat capacity of crude oil
SY 7081-2016 Calibration method of calibration device of geophone tester
SY/T 6810-2010 The Calibration Method of Measuring Instruments of Core Gas
SY/T 5798-1993 Evaluation method for wax inhibitors in crude oil Wax deposition tester method

Professional Standard - Chemical Industry

HG/T 6261-2023 Determination of viscosity of thermosetting resins by rotational rheometer method

Professional Standard - Radio Television Film

GY 22-1984 Verification Method of RC-1 Field Strength Meter

Professional Standard - Post and Telecommunication

YD/T 776-1996 Envelope chromaticity detector
YD/T 775-1996 Envelope detection method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5384.20-2005 Test methods of performance for pyrotechnic composition Part 20: Determination of infrared screening time Infrared thermal imaging sets method

Professional Standard - Traffic

JT/T 3162-1993 Testing methods for portable pendulum tester

Professional Standard - Hydroelectric Power

SD 321-1989 Method for determining the calorific value of coal

Professional Standard - Environmental Protection

HJ 924-2017 Technical requirement and test procedures for rapid COD photometric analyzer

Professional Standard - Coal

MT/T 394-1995 Method for determination of sampling efficiency of respirable dust measuring instrument
MT 394-1995 Determination Methods for Sampling Efficiency of Respirable Dust Measuring Instrument

Professional Standard - Electron

SJ/T 10298-1991 Test methods for LCR measuring instruments

South African Bureau of Standard

SANS 5764:2005 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)

European Committee for Standardization (CEN)

EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
EN 13880-4:2003 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value
EN 993-14:1998 Methods of Test for Dense Shaped Refractory Products - Part 14: Determination of Thermal Conductivity by the Hot-Wire (Cross-Array) Method
EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
EN 13880-2:2003 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C
EN 13880-5:2024 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differintial method
EN 13880-9:2003 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
EN 13880-8:2003 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
EN 993-11:2007 Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock

American Society for Testing and Materials (ASTM)

ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM RR-E37-1051 2018 E3142-Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM E3142-18a(2023) Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM D93-80e1 Standard Test Methods for Flash Point By Pensky-Martens Closed Tester
ASTM D93-90e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
ASTM C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D5591-22 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D7750-12(2017) Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D7750-12 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM RR-D02-1447 1999 D6375-Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM E1311-89(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
ASTM RR-E37-1035 2005 E2206-Test Method for Force Calibration of Thermomechanical Analyzers
ASTM D3464-96(2023) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D3464-96(2001) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM RR-D20-1124 1985 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM RR-E37-1017 1996 E1582-Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM RR-D20-2005 2023 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM F1320-01(2006) Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
ASTM E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
ASTM D6375-24 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM RR-D20-2000 2020 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM D6375-09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer 40;TGA41; Noack Method
ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM RR-E37-1050 2010 E2744-Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM RR-C24-1047 1995 C0906-Test Method for T-Peel Strength of Hot Applied Sealants
ASTM D2858-70(1997)e1 Thermal conductivity measurement method
ASTM RR-E37-1019 1997 E1860-Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM C1871-22 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM E228-95 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Vitreous Silica Dilatometer
ASTM C1871-18 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM E476-87(2001) Standard Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test)
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM RR-E37-1007 1984 E1582-Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM C1871-18a Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM RR-E37-1011 1990 E1363-Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
ASTM D6073-96 Standard Test Method for Relative Setting of Heatset Printing Inks by the Sinvatrol Tester
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E1354-24 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM RR-E27-1003 2002 E0537-Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers

Standard Association of Australia （SAA）

AS K154.6:1964 Methods of test for sealers and adhesives (for automotive purposes), Method 6: Determination of consistency of sealers by extrudiometer
AS K154.6:1970 Methods of test for sealers and adhesives (for automotive purposes), Method 6: Determination by pressure extrudiometer of the consistency of sealers
AS K154.7:1970 Methods of test for sealers and adhesives (for automotive purposes), Method 7: Determination by pressure extrudiometer of the consistency of sealers after accelerated ageing
AS K154.4:1964 Methods of test for sealers and adhesives (for automotive purposes), Method 4: Determination of heat resistance of adhesive bonds
AS 2925.5:1987 Methods of testing thermosetting laminated sheet, Method 5: Method for determining resistance to dry heat
AS K154.7:1964 Methods of test for sealers and adhesives (for automotive purposes), Method 7: Determination of can stability of sealers
AS 1937.4:1977 Methods of test for sealers and adhesives for automotive purposes - Determination of heat resistance of adhesive bonds

German Institute for Standardization

DIN EN 50193:1999 Closed electrical instantaneous water heaters – Methods for measuring performance
DIN EN 13880-4:2003-09 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value; German version EN 13880-4:2003 / Note: To be replaced by DIN EN 13880-4 (2022-10).
DIN EN ISO 5764:2002-09 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2002)
DIN EN 13880-5:2004 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance; German version EN 13880-5:2004
DIN EN 13880-4:2003 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value; German version EN 13880-4:2003
DIN EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C; German version EN 13880-1:2003
DIN EN ISO 5764 E:2007-10 Draft Document - Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO/DIS 5764:2007); German version prEN ISO 5764:2007
DIN EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009); English version of DIN EN ISO 5764:2009-10
DIN EN 13880-2:2003 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C; German version EN 13880-2:2003
DIN EN 13880-5:2004-10 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance; German version EN 13880-5:2004
DIN EN 13880-5:2024 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance; German version EN 13880-5:2024
DIN EN 13880-5:2023-07 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance; German and English version prEN 13880-5:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN 13880-5 (2004-10).
DIN EN 13880-2:2003-11 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C; German version EN 13880-2:2003
DIN EN 13880-1:2003-11 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C; German version EN 13880-1:2003
DIN EN 13880-9:2003 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements; German version EN 13880-9:2003
DIN EN 13880-8:2003 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion; German version EN 13880-8:2003
DIN 53381-3:1971 Thermal stability test method
DIN EN 13880-3:2022 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience); German and English version prEN 13880-3:2022
DIN EN 13880-1 E:2000-07 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
DIN EN 13880-2 E:2000-07 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C
DIN EN 13880-5 E:2001-02 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
DIN EN 13880-5 E:2023 Draft Document - Hot applied joint sealants - Part 5: Test method for the determination of flow resistance; German and English version prEN 13880-5:2023
DIN EN 13880-8:2019-03 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion; German version EN 13880-8:2018
DIN EN 50193:1999-06 Closed electrical instantaneous water heaters - Methods for measuring performance; German version EN 50193:1997
DIN EN 13880-3:2003-09 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience); German version EN 13880-3:2003 / Note: To be replaced by DIN EN 13880-3 (2022-10).
DIN EN 13880-13 E:2016 Draft Document - Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test); German and English version prEN 13880-13:2016
DIN EN 13880-13:2003 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test); German version EN 13880-13:2003
DIN EN 13880-3:2003 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience); German version EN 13880-3:2003
DIN EN 13880-3:2022-10 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience); German and English version prEN 13880-3:2022 / Note: Date of issue 2022-09-23*Intended as replacement for DIN EN 13880-3 (2003-09).
DIN EN 13880-13:2003-11 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)

Gosstandart of Russia

GOST R 56623-2015 Non-destructive testing. Methods of determination of thermal resistance of enclosing structures
GOST 8.411-1981 State system for ensuring the uniformity of measurements. Lever microme ters. Rules and procedure of verification
GOST R ISO 5764-2011 Milk. Determination of freezing point. Thermistor cryoscope method (reference method)
GOST R 54165-2010 Glass and glass products. Thermal properties determination methods. Thermal resistance determination method
GOST R 54853-2011 Bulidings and structures. Method for determination of thermal resistance and thermal coefficient of enclosing structures wiht assistance of heat flow meter
GOST 25935-1983 Dosimetric instruments. Methods of measuring main parameters
GOST 33076-2014 Medical gloves. Method for determination of leak tightness
GOST R ISO 13402-2008 Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure. Test methods
GOST 27319-1987 Thermoplastic materials. Method of determination of thermal bonding strength
GOST 8.255-1977 State system for ensuring the uniformity of measurements. Capasitance measures. Methods and means of calibration
GOST 8.518-1984 State system for ensuring the uniformity of measurements. Ferritometers for austenite steel. Methods of verification
GOST 26602-1985 Windows. Methods of determination of thermal resistance
GOST 8.255-2003 State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure
GOST 18136-1972 Oils. Method for determination of oxidation stability in a universal apparatus
GOST 33785-2016 Sealing materials and gaskets from them. Method for determination of resistance to liquids
GOST 8.154-1975 State system for ensuring the uniformity of measurements. "Artifical ear"-type measuring instruments. Methods and means of verification

Swedish Institute for Standards

SS-EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009)
SS-EN 13880-5:2024 Hot applied joint sealants — Part 5: Test method for the determination of flow resistance
SS-EN 13880-5:2004 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
SS-EN 17667:2022 Test method - Determination of thermal resistance of filled textile articles and similar items using small guarded hotplate apparatus
SS-EN 62194:2005 Method of evaluating the thermal performance of enclosure
SS-EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25°C
SS-EN 13880-2:2003 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25°C
SS-EN 13880-3:2024 Hot applied joint sealants — Part 3: Test method for the determination of penetration and recovery (resilience)

British Standards Institution (BSI)

BS EN 13880-4:2003 Hot applied joint sealants - Test method for the determination of heat resistance - Change in penetration value
BS EN 13880-5:2004 Hot applied joint sealants - Test method for the determination of flow resistance
BS EN 13880-1:2003 Hot applied joint sealants - Test method for the determination of density at 25 °C
BS EN 13880-5:2024 Hot applied joint sealants - Test method for the determination of flow resistance
BS EN 13880-2:2003 Hot applied joint sealants - Test method for the determination of cone penetration at 25 °C
BS EN 27726:1994 Thermal environments. Instruments and methods for measuring physical quantities
BS EN 13880-9:2003 Hot applied joint sealants - Test method for the determination of compatibility with asphalt pavements
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS EN 13880-3:2003 Hot applied joint sealants - Test method for the determination of penetration and recovery (resilience)
BS 5728-6:1993 Measurement of flow of cold potable water in closed conduits-Test methods for combination meters
BS EN 50193:1997 Closed electrical instantaneous water heaters - Methods for measuring performance
BS EN 13880-6:2019 Hot applied joint sealants. Method for the preparation of samples for testing
BS EN 13880-13:2018 Hot applied joint sealants. Test method for the determination of the discontinuous extension (adherence test)
BS EN 13880-8:2018 Hot applied joint sealants. Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
BS EN 13880-3:2024 Hot applied joint sealants - Test method for the determination of penetration and recovery (resilience)
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN 13880-13:2003 Hot applied joint sealants - Test method for the determination of the discontinuous extension (adherence test)
BS EN 13880-8:2003 Hot applied joint sealants - Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
BS EN 13880-10:2003 Hot applied joint sealants - Test method for the determination of adhesion and cohesion following continuous extension and compression
BS 874:1965 Methods for determining thermal insulating properties. With definitions of thermal insulating terms
BS 4745:1971 Method for the determination of thermal resistance of textiles
BS 5728-3:1984 Measurement of flow of cold potable water in closed conduits-Methods for determining principal characteristics of single meters (including test equipment)
BS 7603:1992 Method for determination of stresses in glass-to-glass sealings
BS 874:1973(1999) Methods for Determining thermal insulating properties with definitions of thermal insulating terms

The American Road & Transportation Builders Association

AASHTO TP 89-2010(R2016) Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 89-2010(2016) Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO T 370-2017 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
AASHTO T 370-2018 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
AASHTO T 370-2022 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
AASHTO TP 85-2010(2016) Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
AASHTO TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
AASHTO TP 85-2010(R2016) Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
AASHTO T 368-2017 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot- Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
AASHTO T 368-2017(2021) Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
AASHTO T 368-2022 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)

AASHTO - American Association of State Highway and Transportation Officials

T73-1989 Standard Method of Test for Flash Point by Pensky-Martens Closed Tester
TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
T 370-2017 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
T 370-2018 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
T 368-2017 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
TP 126-2017 Standard Method of Test for Evaluation of the Tracking Resistance of Hot-Poured Asphalt Crack Sealant by Dynamic Shear Rheometer (DSR)
TP 126-2018 Standard Method of Test for Evaluation of the Tracking Resistance of Hot-Poured Asphalt Crack Sealant by Dynamic Shear Rheometer (DSR)
T73-1999 Standard Method of Test for Flash Point by Pensky-Martens Closed Tester (Nineteenth Edition; Revision Per Interim Specifications - Tests and Methods - 1999)

Underwriter Laboratories of Canada (ULC)

ULC 135-2004 Standard Test Method for the Determination of Combustibility Parameters of Building Materials Using an Oxygen Consumption Calorimeter (Cone Calorimeter)
ULC-S135:2022-2022 STANDARD TEST METHOD FOR THE DETERMINATION OF COMBUSTIBILITY PARAMETERS OF BUILDING MATERIALS USING AN OXYGEN CONSUMPTION CALORIMETER (CONE CALORIMETER)

CZ-CSN

CSN ISO 7726:1993 Thermal environments. Instruments and methods for measuring physical quantities

Danish Standards Foundation

DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
DS/EN 13880-5:2005 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
DS/EN 13880-4:2003 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value
DANSK DS/EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
DS/EN 13880-1:2004 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
DANSK DS/EN 13880-5:2004 Hot applied joint sealants – Part 5: Test method for the determination of flow resistance
DANSK DS/EN 13880-4:2003 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value
DANSK DS/EN 13880-13:2018 Hot applied joint sealants – Part 13: Test method for the determination of the discontinuous extension (adherence test)
DS/EN 13880-2:2004 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C
DANSK DS/EN 13880-3:2003 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
DANSK DS/EN IEC 62372:2022 Nuclear instrumentation – Housed scintillators – Test methods of light output and intrinsic resolution
DANSK DS/EN 13880-9:2003 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
DS/EN 13880-3:2003 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
DANSK DS/EN 13880-2:2003 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C
DS/EN 13880-9:2003 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements

Ente Nazionale Italiano di Unificazione

UNI EN 13880-4:2003 Hot applied joint sealants - Test method for the determination of heat resistance - Change in penetration value
UNI EN 13880-1:2003 Hot applied joint sealants - Test method for the determination of density at 25 °C
UNI EN 13880-5:2004 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
UNI EN 13880-5:2024 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
UNI EN 27726:1995 Thermal environments. Instruments and methods for measuring physical quantities.
UNI EN 13880-12:2003 Hot applied joint sealants - Test method for the manufacture of concrete test blocks for bond testing (recipe methods)
UNI EN ISO 15908:2005 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
UNI EN ISO 14851:2005 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
UNI EN 13880-8:2003 Hot applied joint sealants - Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
UNI 10593-4:1996 Glass in building. Insulating glass units. Tests method for determination of the physical properties of edge seals.

Association Francaise de Normalisation

NF P98-880-5*NF EN 13880-5:2005 Hot applied joint sealants - Part 5 : test method for the determination of flow resistance
NF X35-202:1994 Thermal environments. Instruments and methods for measuring physical quantities.
NF P98-880-4*NF EN 13880-4:2003 Hot applied joint sealants - Part 4 : test method for the determination of heat resistance - Change in penetration value
NF EN 13880-4:2003 Hot-applied joint sealants - Part 4: Test method for determining heat resistance - Variation in penetrability
NF C73-193:2014 Closed electrical instantaneous water heaters - Methods for measuring performance
NF EN 13880-5:2005 Hot-applied joint sealants - Part 5: test method for determining creep resistance
NF EN 13880-1:2004 Hot-applied joint sealants - Part 1: test method for determining density at 25 oC
NF EN 13880-5:2024 Hot applied joint sealants - Part 5 : test method for the determination of flow resistance
NF ISO 21901:2021 Thermal insulation - Test method for thermal diffusivity - Periodic heating method
NF EN 13880-2:2004 Hot-applied joint sealants - Part 2: test method for determining cone penetration at 25 oC
NF P98-880-10:2004 Hot applied joint sealants - Part 10 : Test method for the determination of adhesion and cohesion following continuous extension and compression.
NF EN 13880-3:2003 Hot-applied joint sealants - Part 3: test method for determining penetrability and springback
NF P98-880-1*NF EN 13880-1:2004 Hot applied joint sealants - Part 1 : test method for the determination of density at 25o C
NF P98-880-9*NF EN 13880-9:2003 Hot applied joint sealants - Part 9 : test method for the determination of compatibility with asphalt pavements
NF EN IEC 60695-2-10:2021 Essais relatifs aux risques du feu - Partie 2-10 : essais au fil incandescent/chauffant - Appareillage et méthode commune d'essai
NF EN 13880-9:2003 Hot-applied joint sealants - Part 9: test method for determining compatibility with bituminous coatings
NF X10-025:1991 Thermal insulation - Determination of thermal resistance and thermal conductivity in steady state - Fluxmetric method
NF P98-880-13:2004 Hot applied joint sealants - Part 13 : test method for the determination of the discontinuous extension (adherence test).
NF P98-880-2*NF EN 13880-2:2004 Hot applied joint sealants - Part 2 : test method for the determination of cone penetration at 25o C

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN prEN 3101:1970 Non-metallic materials - Sealants - Test method - Determination of resistance to thermal rupture
ASD-STAN PREN 3101-1997 Aerospace Series Non-Metallic Materials Sealants Test Method Determination of Resistance to Thermal Rupture (Edition P 1)

American National Standards Institute （ANSI)

ANSI/ASTM D6375:2009 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) (Noack Method)
ANSI/ASTM D3795:2000 Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer (15.04)
ANSI/ASHRAE 193P-2010 Method of Test for Determining the Airtightness of HVAC Equipment
ANSI/ASTM D4591:2001 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 3580.12.1:2001 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method

Standards Norway

NS-ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
NS-EN 13880-5:2024 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
NS-EN 13880-4:2003 Hot applied joint sealants — Part 4: Test method for the determination of heat resistance — Change in penetration value
NS-EN 13880-1:2003 Hot applied joint sealants — Part 1: Test method for the determination of density at 25 ºC
NS-EN 13880-5:2004 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
NS-EN 13880-2:2003 Hot applied joint sealants — Part 2: Test method for the determination of cone penetration at 25 ºC
NS-EN 13880-8:2018 Hot applied joint sealants — Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

Spanish Association for Standardization (UNE)

UNE 32105:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY THE CALORIMETER BOMB METHOD.
UNE-EN 50193:1998 CLOSED ELECTRICAL INSTANTANEOUS WATER HEATERS. METHODS FOR MEASURING PERFORMANCE.
UNE-EN 13880-5:2006 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
UNE-EN 13880-1:2004 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
UNE 51024:1987 PETROLEUM PRODUCTS. DETERMINATION OF FLASH POINT. ABEL-PENSKY CLOSED TESTER
UNE-EN 13880-2:2004 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25°C
UNE-EN 13880-3:2004 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
UNE-EN 13880-9:2004 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements

GCC Standardization Organization

BH GSO ASTM C1363:2024 Standard test Method for Thermal performance of building Materials and Envelope Assemblies by Means of Hot Box Apparatus
BH GSO ASTM D1826:2024 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter

International Organization for Standardization (ISO)

ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities

RO-ASRO

STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities
STAS 7622-1966 test methods. Method for determination of thermal insulation properties of mineral powdered thermal insulators

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 3101-1990 Aerospace Series Test Methods for Sealants Determination of Resistance to Thermal Rupture

Japanese Industrial Standards Committee (JISC)

JIS A 1316:2022 Test method using cone calorimeter measuring heat release rate and smoke production rate for building materials
JIS Z 4511:1991 Methods of calibration for exposure meters and dose-equivalent meters
JIS C 2541:2023 Thermal measurement method of loss distribution on iron core surfaces by means of an infrared camera
JSA JIS Z 0238 Test methods for heat-sealed flexible packaging and semi-rigid containers
JIS K 0971:1989 Calibration methods for micro-volumetric apparatus
JIS Z 0238:1998 Testing methods for heat sealed flexible packages
JIS B 7440:1987 Test code for accuracy of coordinate measuring machines
JIS P 8143:2009 Paper -- Determination of stiffness -- Clark stiffness tester method

European Committee for Electrotechnical Standardization（CENELEC）

EN 50193:1997 Closed Electrical Instantaneous Water Heaters; Methods for Measuring Performance (Remains Current)

American Water Works Association (AWWA)

AWWA WQTC55114 Instrumental Methods for the Determination of Cyanobacterial Toxins

Association of German Mechanical Engineers

VDI VDE DGQ DKD 2622 Blatt 2-1-2011 Calibration of measuring equipment for electrical quantities - Methods for the determination of measurement uncertainty

Lithuanian Standards Office

LST EN 13880-5-2004 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
LST EN 13880-4-2004 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value
LST EN 13880-1-2004 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
LST EN 13880-2-2004 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25°C
LST EN 13880-3-2004 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
LST EN 13880-9-2004 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements

VN-TCVN

TCVN 5241-1990 Sewing thread.Method for determination of diameter on thickness tester

Korean Agency for Technology and Standards (KATS)

KS B 4411-2020 Double sizers — Test and inspection methods
KS H ISO 5764-2006(2016) Milk－Determination of freezing point－Thermistor cryoscope method
KS B ISO 3149-2013 Radiators, convectors and similar appliances－Determination of thermal output－Test method using liquid-cooled closed booth
KS B ISO 7858-3-2015 Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 3: Test methods
KS M 2734-2013 Testing method of colour of fats and oils by means of loviboned tintometer
KS M 6898-2016 Testing method for set in lasting with the dome plasticity apparatus
KS F 2823-2006 Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)

AT-ON

ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)

American Gear Manufacturers Association

AGMA 96FTM9-1996 Development of a Practical Thermal Rating Method for Enclosed Gear Drives
AGMA 96FTM9 Development of a Practical Thermal Rating Method for Enclosed Gear Drives

Society of Automotive Engineers (SAE)

SAE ARP4252B-2017 Instrumental Methods of Determining Surface Cleanliness
SAE ARP4252-1995 INSTRUMENTAL METHODS OF DETERMINING SURFACE CLEANLINESS
SAE ARP4252A-2017 Instrumental Methods of Determining Surface Cleanliness

International Federation of Trucks and Engines

NAVISTAR CEMS DT-7-2009 VOID - Method for Determining Hardness of Seal Materials

GOST

GOST 33192-2024 Petroleum products and other liquids. Method for determination of flash point by Tag closed cup tester

International Electrotechnical Commission (IEC)

IEC 62372:2006 Nuclear instrumentation - Housed scintillators - Measurement methods of light output and intrinsic resolution

Bureau of Indian Standards

IS 1448-6-1984 Methods of test for petroleum and its products part 6: Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter Method
IS 3346-1980 Method of the determination of thermal conductivity of thermal insulation materials (two slab guarded hot plate method)

CEN - European Committee for Standardization

EN 13880-8:2018 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

Instrument Society of America (ISA)

ISA RP67.04.02-2010 Methodologies for the Determination of Setpoints for Nuclear Safety-Related Instrumentation

BE-NBN

NBN B 12-213-1975 cement. Heat conduction method for measuring heat of hydration
NBN 236-1952 Method for determination of heat emissions from radiators
NBN-EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)
NBN X 10-002-1986 Specifications relating to the appliances and methods

TR-TSE

TS 1092-1972 METHODS OF TEST POR BOT POURED ELASTIC TYPE?S OF CONCRETE, JOINT SEALERS

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 41.9-2000 Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants

Magyar Szabványügyi Testület

MSZ 18222/3-1979 Audiometry instrument testing methods

AR-IRAM

IRAM 8502-1954 Leather heat loss measurement method

IN-BIS

IS 10699-1983 Determination method of specific heat of grain
IS 9027-1978 Determination method of grain thermal conductivity

SG-SPRING SG

SS 323 Pt.F1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part F1 : Determination Of Heat Seal Strength

Others: Determination method of heat sealer