Gas phase adjustment method

Gas phase adjustment method, Total:411 items.

The international standard classification for "Gas phase adjustment method" includes: Fertilizers , Refrigerating technology , Valves in general , Ventilation and air-conditioning systems , Ventilators. Fans. Air-conditioners , Marine ventilation, air-conditioning and heating systems , Energy and heat transfer engineering in general , Installations in buildings in general , Braking systems , Anaesthetic, respiratory and reanimation equipment , Other equipment related to power transmission and distribution networks .

The Chinese standard classification for "Gas phase adjustment method" includes: Railway passenger coaches , Refrigeration equipment , Basic standards and general methods on chemical fertilizers , Actuator , Pesticide , Household air conditioning and cooling appliances , Marine transportation vessels , Technical management , Architectural physics , Braking system , Dump truck , Life-support system and equipment , Analysis methods for toxic substances in atmosphere , Technical Management , Surgery devices , Complete equipment for high voltage device .

Professional Standard - Railway

TB/T 1675-2001 Railway Passenger air conditioning test methods

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37500-2019 Determination of plant growth regulators in fertilizer—High performance liquid chromatography
GB/T 20738-2018 Rooftop air conditioning unit
GB/T 40460-2021 Determination of plant growth regulators in fertilizers—Gas chromatography

Professional Standard - Machinery

JB/T 3830.3-1984 Test method for marine vertical cabinet air conditioner

Group Standards of the People's Republic of China

T/ZZB 3080-2023 Passive residential air conditioner
T/GXAS 003-2017 Gas chromatography analysis method of caryophyllene in heavy turpentine
T/QGCML 1954-2023 High pressure difference resistant pneumatic regulating valve
T/CAB 0100-2021 Room air conditioner with huge air volume
T/SDAQI 058-2021 Determination of Plant Growth Regulator in Water Soluble Fertilizer by Gas Chromatography-Mass Spectrometry
T/CASME 17-2022 Pneumatic diaphragm single seat regulating valve
T/CAS 442-2020 Multi mode sterilization function requirements and test methods for room air conditioners
T/QGCML 2676-2023 Gas storage type pneumatic regulating valve
T/ZZB 1023-2019 Pneumatic control valves for petroleum， petrochemical， natural gas and related industries
T/CAMS /CICEIA67-2021 Electronic control regulating valve for diesel engine
T/QGCML 1487-2023 General specifications for pneumatic regulating valves
T/CAS 234-2014 Air Jet Type Room Air Conditioners
T/CAB CSISA0030-2020 Test and Evaluation for Artificial Thermal Environment Comfort Part 1: Room Air Conditioner
T/GXAS 004-2017 Gas Chromatographic Analysis Method of Longifolene in Heavy Turpentine Oil
T/CEC 533-2021 Technical specification for three-phase unbalance adjustment energy-saving device in low-voltage station area
T/ZZB 0234-2017 Non-adjustable gas utility lighter
T/ZZB 0100-2016 Non-adjustable gas lighter
T/GDAR 0001-2020 Performance requirements and test methods for virus and oil eliminating for air conditioners
T/CRAAS 1203-2023 Reliability evaluation method for air conditioners used in data centers and base stations
T/CAB 0079-2020 Test and evaluation method for room air conditioner with easily disassemble and cleaning function
T/SSR 701-2019 The evaluation values and testing method of long-term energy conservation for heat exchangers used in room air-conditioners
T/CAS 299-2018 Room air conditioner with air cleaning function
T/CAS 744-2023 Test method for corrosion resistance of aluminum heat exchangers for room air conditioners
T/CAGDE 005-2017 Room air conditioners
T/CAEE 001-2023 Carbon emission assessment methods and requirements for the entire life cycle of room air conditioners

Professional Standard-Ships

CB/Z 232-1986 Calculation method for air conditioning system design of surface warships

Professional Standard - Agriculture

GB/T 42954-2023 Determination of plant growth regulators in fertilizers—Gas chromatography-mass spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17758-1999 Unitary air conditioners
GB/T 7725-2022 Room air conditioner
GB/T 17758-2023 Unitary air conditioners
GB/T 4213-2008 Pneumatic industrial process control valves
GB/T 17758-2010 Unitary air conditioners
GB/T 20738-2006 Rooftop air conditioning unit
GB/T 24985-2010 Test methods for reliability on household and similar room air conditioners
GB/T 7725-2004 Room air conditioners
GB/T 17981-2000 Economic operation of air conditioning systems
GB/T 7725-1996 Room air conditioners
GB/T 17981-2007 Economic operation of air conditioning systems
GB 8201-1987 Analytical method of content for fosamine aqueous solution
GB/T 13409-1992 Air-conditioning and ventilation of accommodation spaces on board ships-Design parameter and method of calculations

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33029-2016 Composition of turpentine and related terpene products一 Test methods of capillary gas chromatography
GB/T 35972-2018 Energy-saving commissioning method of heating andair conditioning system

Taiwan Provincial Standard of the People's Republic of China

CNS 3615-2004 Non-ducted air conditioners
CNS 6874-1989 Method of Measurment of Air Quantity for Ventiation and Air Conditioning System

Professional Standard - Automobile

QC/T 38-1992 Automobile and trailer - Test method for pneumatic adjusting and protective device stage
QC/T 656-2023 Heating ventilation and air conditioning assembly for automotive air conditioning
QC/T 37-2015 Automobile and trailer―Specifications and test methods of bench for pressure regulator and protector
QC/T 76.9-1993 Test method for mining dump truck - Performance test for air conditioning system

Hebei Provincial Standard of the People's Republic of China

DB13/T 1610-2012 Phase-change energy-saving heat storage and temperature-adjusting materials

Professional Standard - Aviation

HBm 47-1986 Room Air Conditioners
HB 6504-1991 General specification for oxygen regulator

Professional Standard - Chemical Industry

HG/T 2981-1987 Analytical method of content for fosamine aqueous solution
HG/T 2981-1987(1997) Analytical method of content for fosamine aqueous solution

未注明发布机构

CSA 6.18-2002(R2017) Service Regulators for Natural Gas
AS 2913:2000(R2016) Evaporative air-conditioning equipment
DIN EN ISO 10524-2 E:2017-04 Pressure regulators for medical gases Part 2: Inlet pressure regulators and linear pressure regulators (draft)
CAN/CSA-Z10524-4-2012(R2017) Pressure regulators for use with medical gases — Part 4: Low-pressure regulators
SAE AS8027-2023 Crew Member Oxygen Regulators, Demand
SAE AS1197B-2023 Continuous Flow Oxygen Regulator
DIN EN ISO 10524-3:2006 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves

Shanghai Provincial Standard of the People's Republic of China

DB31/T 941.1-2015 Evaluation method for top runner on ernergy conservation (domestic electrical appliances).Part 1:Room air conditioners

工业和信息化部/国家能源局

JB/T 13289-2017 Internal combustion engines. Variable valve control system. Cam phaser. Techical requirements

Professional Standard - Environmental Protection

HJ 696-2014 Water Quality - Determination of Turpentine - Gas Chromatography Method
HJBZ 18-1997 Energy saving, low noise room air conditioner

Professional Standard - Electron

SJ 1713-1981 Measurement of phaseshift of power klystrons
SJ 1860-1981 Measurement of AM-PM conversion coefficient of power klystrons
SJ/T 10870-1996 Measurements of electrical properties of disk-seal tubes - Methods of measurement for AM - PM conversion coefficient
SJ/T 31438-1994 Requirements of Readiness and Methods of Inspection and Assessment for Heat-pump Room Air Conditioners

Beijing Provincial Standard of the People's Republic of China

DB11/T 1538-2018 Split air conditioner energy saving monitoring

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1462.2-2014 Cloud Technology Applied Room Air Conditioner Part 2: Cloud Room Air Conditioner

Professional Standard - Medicine

YY/T 1439.2-2016 Pressure regulators for use with medical gases—Part 2:Manifold and line pressure regulators

Professional Standard - Commodity Inspection

SN/T 3935-2014 Determination of uniconazole class of plant growth regulators residues in foods for export - GC-MS method

国家能源局

NB/T 10327-2019 Low-voltage active three-phase unbalanced load regulator

Professional Standard - Petroleum

SY/T 7066-2016 Calculation method of energy saved for gas field
SY 7066-2016 Gas Field Energy Saving Calculation Method

Henan Provincial Standard of the People's Republic of China

DB41/T 1359-2016 Explosion-proof unit air conditioner

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2225-2016 Test method for controlled atmosphere storage of fruits and vegetables

Korean Agency for Technology and Standards (KATS)

KS R 1053-2007 Testing method for automobile air conditioners
KS R 1053-2013 Test methods for automobile air conditioners
KS F 2807-2001 Method of measurement of air quantity for ventilation and air conditioning system
KS B 6717-2004 Ice thermal storage units for air conditioning purpose－Test methods
KS C 9306-2011 Air conditioners
KS H ISO 15592-2:2013 Fine-cut tobacco and smoking articles made from it-Methods of sampling, conditioning and analysis-Part 2:Atmosphere for conditioning and testing
KS B 8213-2019 Pressure regulators and associated safety devices for gas appliances－Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
KS H ISO 15592-2-2023 Fine-cut tobacco and smoking articles made from it－Methods of sampling, conditioning and analysis－Part 2：Atmosphere for conditioning and testing
KS C IEC 60535-2002(2017) Jet fans and regulators
KS C IEC 60535-2022 Jet fans and regulators
KS B 6354-2016(2021) LP－GAS pressure regulators used in cutting,heating and related processes
KS B 8213-2009(2019) Pressure regulators and associated safety devices for gas appliances－Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
KS B ISO 6953-2-2013 Pneumatic fluid power－Compressed air pressure regulators and filter-regulators－Part 2：Test methods to determine the main characteristics to be included in literature from suppliers
KS B ISO 6953-2-2005(2010) Pneumatic fluid power－Compressed air pressure regulators and filter-regulators－Part 2：Test methods to determine the main characteristics to be included in literature from suppliers
KS B ISO 7292:2005 Flowmeter regulators used on cylinders for welding, cutting and allied processes-Classification and specifications
KS B ISO 7292:2015 Flowmeter regulators used on cylinders for welding, cutting and allied processes－Classification and specifications
KS B ISO 2503-1:2002 Gas welding equipment－Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
KS B ISO 2503-1:2003 Gas welding equipment－Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
KS B ISO 2503-2007(2017) Gas welding equipment－Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
KS R 2056-2013 Expansion valves for automobile air conditioners
KS B ISO 7292-2005(2010) Flowmeter regulators used on cylinders for welding, cutting and allied processes－Classification and specifications
KS B 6213-2019 Liquefied petroleum gas regulators for domestic use
KS R 2056-2002 Expansion valves for automobile air conditioners
KS W 5092-2023 AC generators and associated regulators for aircraft

Standard Association of Australia （SAA）

AS 4621:2019 Regulator for use with liquefied petroleum — Vapour phase
AS 4618:2019 Gas appliance regulators
AS 2913:2000 Evaporative air-conditioning equipment
AS 3840.1:1998 Pressure regulators for use with medical gases - Pressure regulators and pressure regulators with flow-metering devices

Society of Automotive Engineers (SAE)

SAE ARP5374B-2021 Method of Testing Pre-Conditioned Air Equipment
SAE AS1197-1993 CONTINUOUS FLOW OXYGEN REGULATOR
SAE AIR806B-1997 Air Conditioning of Aircraft Cargo
SAE AS1197A-2018 Continuous Flow Oxygen Regulator
SAE AS8027-2018 Crew Member Oxygen Regulators, Demand
SAE AS1197B-2019 Continuous Flow Oxygen Regulator
SAE AS463-2002 Oxygen Regulators for Commercial Transport Aircraft
SAE AS8027-1995 Crew Member Oxygen Regulators, Demand

Japanese Industrial Standards Committee (JISC)

JIS B 8615:1984 Testing methods for unitary air conditioners
JIS B 8372-3:2022 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
JIS C 9612:2013 Room air conditioners
JIS C 9612:1994 Room air conditioners
JIS C 9612:1999 Room air conditioners
JIS C 9612:2005 Room air conditioners
JIS B 8616:1993 Package air conditioners
JIS A 4412:1994 Air-conditioning unit for dwellings
JIS B 8372-2:2022 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
JIS B 8372-2:2003 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
JIS E 4015 AMD 1:2011 Measuring methods for air conditioning and heating temperature of railway rolling stock (Amendment 1)

SAE - SAE International

SAE ARP5374B-2016 Method of Testing Pre-Conditioned Air Equipment
SAE ARP5374-2001 Method of Testing Pre-Conditioned Air Equipment
SAE AS1197A-1998 Continuous Flow Oxygen Regulator
SAE AS1197-1970 Continuous Flow Oxygen Regulator
SAE AS4792B-2019 Water Conditioning Agents for Aqueous Magnetic Particle Inspection

AENOR

UNE 7523-1:1997 ATMOSPHERES FOR CONDITIONING AND TESTING. DETERMINATION OF RELATIVE HUMIDITY. PART 1: ASPIRATED PSYCHROMETER METHOD.
UNE 7523-2:1997 ATMOSPHERES FOR CONDITIONING AND TESTING. DETERMINATION OF RELATIVE HUMIDITY. PART 2: WHIRLING PSYCHROMETER METHOD.
UNE-EN 88-2:2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
UNE 28603:1988 AIRCRAFT. GROUND AIR. CONDITIONING CONNECTIONS.

RU-GOST R

GOST R ISO 187-2012 Pulps, paper, board. Standard atmosphere for conditioning and testing. Method for monitoring the atmosphere and conditioning
GOST 10681-1975 Textiles. Methods for determination atmospheric conditions for sample conditioning and testing
GOST R 51125-1998 Domestic air conditioning and pollution control equipment. Safety requirement and methods of testing
GOST 32795-2014 Fine-cut smoking tobacco and smoking articles made fromit. Methods of sampling, conditioning and analysis. Part 2. Atmosphere for conditioning and testing

FI-SFS

SFS 5150-1986 Air conditioning device. Air filter testing methods
SFS 4699-1981 Air conditioning device. Stability requirements for air conditioning facilities
SFS 5512-1989 Air conditioning device. Measurement of air flow and air pressure in air conditioning systems
SFS 5329-1987 Air conditioning device. Regulators for constant airflow and varying airflow. test
SFS 5331-1987 Air conditioning device. Adjustment and closing device testing
SFS 5357-1987 Air conditioning device. Central air conditioning. Determination
SFS 5330-1987 Air conditioning device. Adjustment device and closing device. Equipment requirements
SFS 5517-1989 Air conditioning device. Determination of the acceptable range of air conditioning systems. Noise measurement
SFS 5332-1987 Air conditioning device. High-resolution air filtration vulnerability testing. concepts, units, methods
SFS 4281-1978 Air conditioning device. Round flange. Combined with gap measurement
SFS 5407-1987 Air conditioning device. Heating blower. Determination
SFS 5406-1987 Air conditioning device. Hot air blower. Determination
SFS 5358-1987 Air conditioning device. Central air conditioning. Requirements and tests

International Organization for Standardization (ISO)

ISO/DTS 19870:2023 Methodology for Determining the Greenhouse Gas Emissions Associated with the Production, Conditioning and Transport of Hydrogen to Consumption Gate
ISO/CD TS 19870:2011 Methodology for Determining the Greenhouse Gas Emissions Associated with the Production, Conditioning and Transport of Hydrogen to Consumption Gate
ISO 10524-2:2018 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
ISO 10524-2:2005 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
ISO 4677-2:1985 Atmospheres for conditioning and testing; Determination of relative humidity; Part 2 : Whirling psychrometer method
ISO 4677-1:1985 Atmospheres for conditioning and testing; Determination of relative humidity; Part 1 : Aspirated psychrometer method
ISO 2503:1983/Add 1:1984 Pressure regulators for gas cylinders used in welding, cutting and allied processes — Addendum 1
ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
ISO 7292:1997 Flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification and specifications
ISO 6953-2:2023 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to include in supplier’s literature
ISO/FDIS 6953-2:2023 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to include in supplier’s literature
ISO 6953-2:2024 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to include in supplier’s literature
ISO/DIS 6953-2 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to include in supplier’s literature
ISO 10294-1:1996 Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method
ISO 16358-2:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part 2: Heating seasonal performance factor
ISO 10524-3:2005 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
ISO 16358-1:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part 1: Cooling seasonal performance factor
ISO 10524-1:2018 Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices

Association Francaise de Normalisation

NF EN ISO 187:2022 Paper, cardboard and pulp - Normal conditioning and testing atmosphere and method of monitoring the atmosphere and conditioning samples
NF EN 334/IN1:2009 Gas pressure regulating devices (regulators) for inlet pressures up to 100 bar
NF EN ISO 10524-1:2019 Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1 : détendeurs et détendeurs-débitmètres
NF EN ISO 2503:2009 Gas Welding Equipment - Integrated flow meter regulators and regulators for gas cylinders used for welding, cutting and related techniques up to 300 bar (30 MPa)
NF ISO 15592-2:2002 Rolling tobacco and articles made from this type of tobacco - Methods of sampling, packaging and analysis - Part 2: packaging and testing atmosphere
NF D36-302-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1 : pressure regulators for inlet pressures up to and including 500 mbar.
NF ISO 6953-3:2012 Pneumatic transmissions - Compressed air pressure regulators and filter regulators - Part 3: alternative test methods for measuring the flow characteristics of pressure reducing valves
NF EN ISO 2503/A1:2015 Gas welding equipment - Regulators and integrated flow meter regulators for gas cylinders used for welding, cutting and related techniques up to 300 bar (30 MPa) - Amendment 1
NF A84-420:1991 Equipment for gas welding and allied processes. Pressure regulators inlet connections. Dimensions.
NF EN ISO 10524-1/A1:2023 Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1 : détendeurs et détendeurs-débitmètres - Amendement 1
NF EN ISO 10524-4:2008 Détendeurs pour l'utilisation avec les gaz médicaux - Partie 4 : détendeurs basse pression
NF S95-159-4*NF EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4 : low-pressure regulators
NF S95-178/A1:2002 Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.
NF E49-330-2:2000 Pneumatic fluid power - Compressed air regulators and filter-regulators - Part 2 : test methods to determine the main characteristics to be included in literature from suppliers.
NF D36-302-1/IN1*NF EN 88-1/IN1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1 : pressure regulators for inlet pressures up to and including 50 kPa
NF S95-178:1998 Pressure regulators for use with medical gases. Part 3 : pressure regulators integrated with cylinder valves.
NF D36-302-1*NF EN 88-1+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1 : pressure regulators for inlet pressures up to and including 50 kPa
NF E29-795:2017 Gas cylinders - Conditioning of halogenated hydrocarbons - Filling and draining method - Reclaimation of halogenated hydrocarbons
NF E29-795:2014 Gas cylinders - Conditioning of halogenated hydrocarbons - Filling and draining method - Reclaimation of halogenated hydrocarbons
NF E29-795:1992 Gas cylinders. Conditioning of halogenated hydrocarbons. Filling and draining method. Reclaimation of halogenated hydrocarbons.
NF E49-330-2*NF ISO 6953-2:2015 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 2 : test methods to determine the main characteristics to be included in literature from suppliers
NF E29-190-2:2014 Appareils de régulation de pression de gaz (régulateurs) pour réseaux de distribution et branchements - Partie 2 : régulateurs de type B
NF S95-159-1:2006 Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow-metering devices.
NF EN 88-1/IN1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: pressure regulators for inlet pressure less than or equal to 50 kPa
NF ISO 6953-2:2015 Pneumatic transmissions - Pressure regulators and filter-regulators for compressed air - Part 2: test methods to determine the main characteristics to be included in suppliers' documentation
NF EN ISO 10524-3:2019 Regulators for use with medical gases - Part 3: regulators integrated into gas cylinder valves (VIPR)
NF A84-420:2011 Equipment for gas welding and allied processes - Pressure regulators inlet connections - Dimensions.
NF S95-159-3:2006 Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.

American National Standards Institute （ANSI)

ANSI Z21.18-2007 Gas Appliance Pressure Regulators (same as CSA 6.3)
ANSI/AHAM RAC-1-2008 Room Air Conditioners
CSA 6.18-2002(R2022) Service Regulators for Natural Gas
ANSI/ASHRAE 127-2012 Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners
ANSI/ASHRAE 158.2-2018 Methods of Testing Capacity of Refrigerant Pressure Regulators
ANSI/ASHRAE 158.2-2011 Methods of Testing Capacity of Refrigerant Pressure Regulators

SCC

BS 6427-1:1983 Conditioning of sacks for testing.-Method for conditioning paper sacks
BS 2852-1:1982 Testing for rating of room air-conditioners-Method of testing for rating of room air-conditioners for cooling performance
BS PD ISO/TS 19870:2023 Hydrogen technologies. Methodology for determining the greenhouse gas emissions associated with the production, conditioning and transport of hydrogen to consumption gate
DANSK DS/ISO/TS 19870:2023 Hydrogen technologies – Methodology for determining the greenhouse gas emissions associated with the production, conditioning and transport of hydrogen to consumption gate
MIL MIL-R-42043-1987 REGULATOR, OXYGEN
10/30205401 DC BS ISO 6953-3. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Part 3. Alternative test methods for measuring the flow-rate characteristics of pressure regulators
BS 3554-1:1971 Specification for gas governors-Independent governors for inlet pressures up to 25 mbar
BS EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances-Pressure regulators for inlet pressures up to and including 50 kPa
BS 3554-2:1972 Specification for gas governors-Independent governors for inlet pressures up to 350 mbar
CAN/CSA-Z10524-1-2012(C2017) Regulators for use with medical gases — Part 1: Regulators and flow meter regulators
ANSI/CAN/UL/ULC 252:2023 Compressed Gas Regulators
VDI 3785 BLATT 1-2008 Environmental meteorology — methodology and presentation of results of studies on planning-relevant urban climate
FM Approvals 1363:2012 Suction Pressure Regulating Valves
DANSK DS/ISO 15592-2:2001 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing
BS 5669-1:1989 Particleboard-Methods of sampling, conditioning and test
ANSI/CAN/UL 144:2021 LP-Gas Regulators
DANSK DS/EN IEC 60665:2019 A.C. ventilating fans and regulators for household and similar purposes – Methods for measuring performance
CAN/CSA-Z10524-4-2012(C2017) Regulators for use with medical gases — Part 4: Low pressure regulators
FCI 4-1-2007 Pressure Regulator Hydrostatic Shell Test Method
CEI EN IEC 60665:2019 A.C. ventilating fans and regulators for household and similar purposes - Methods for measuring performance
FCI 4-1-2014(R2019) Pressure Regulator Hydrostatic Shell Test Method
DANSK DS/EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
NS-EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
CSA 6.3:19/ANSI Z21.18-2019(R2024) Gas Appliance Pressure Regulators
CSA 6.3-2000(R2006) Gas Appliance Pressure Regulators
CSA 6.3:19/ANSI Z21.18-2019 Gas Appliance Pressure Regulators
CSA ANSI Z21.18-2007 (R2017)/CSA 6.3-2007(R2016) Gas Appliance Pressure Regulators
UNE-EN 88-1:2008 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar
NS-EN 88-1:2007 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar
ULC ORD-C252-1975 Guide for the Investigation of Gas Pressure Regulators
CSA/ANSI Z21.18:19 • CSA 6.3-2019 Gas appliance pressure regulators
CAN/CSA-Z10524-3-2012(C2017) Regulators for use with medical gases — Part 3: Regulators integrated into gas cylinder valves
04/30111044 DC EN 88-1. Pressure governors and associated safety devices for gas appliances. Part 1. Pressure governors for inlet pressures up to 500 mbar
AENOR UNE 20443:1983 Jet fans and associated speed regulators.
BS 3016-1:1958 Pressure regulators for use with butane/propane gases. Low pressure regulators for use with butane gas
BS 3016-3:1960 Pressure regulators for use with butane/propane gases. Variable high pressure regulators
NS-EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
DANSK DS/EN 88-1+A1:2016 Pressure regulators and associated safety devices for gas appliances – Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
BS 3016-2:1960 Pressure regulators for use with butane/propane gases. Low pressure regulators for use with propane gas
AS 1441.1:1973 Methods of test for coated fabrics, Method 1: Conditioning of test specimens
DIN 53102:1968 Testing of paper and board; method for the conditioning of samples
UNE-EN 13787:2003 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar.
NS-EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
CAN/CSA Z10524-4-2012(R2022) Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
DANSK DS/EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
BS 3431:1973 Method for the conditioning of paper and board for testing
SPC GB/T 37500-2019 Determination of plant growth regulators in fertilizer -- High performance liquid chromatography (TEXT OF DOCUMENT IS IN CHINESE)
AENOR UNE-EN 88-2:2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
NS-EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances — Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
DANSK DS/EN ISO 2503:2009 Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
DANSK DS/EN ISO 2503/A1:2009 Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
NS-EN 738-3:1998 Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves
UNE-EN 738-3:1999 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
CAN/CSA-Z10524-2-2012(C2017) Regulators for use with medical gases — Part 2: Pipe and rail regulators
BS EN ISO 10524-2:2006 Pressure regulators for use with medical gases-Manifold and line pressure regulators

BE-NBN

NBN 232-13-1970 Pneumatic adjustment
NBN D 51-002-1972 Central heating, ventilation and air conditioning. moderation feed
NBN D 17-001-1975 Central heating, ventilation and air conditioning, regulators and gas expanders

GSO

GSO ISO 4677-2:2008 Atmospheres for conditioning and testing-Determination of relative humidity-Part 2 : Whirling Psychrometer Method
OS GSO ISO 6953-3:2016 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
GSO ISO 6953-3:2016 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
OS GSO ISO 4677-1:2008 Atmospheres for conditioning and testing-Determination of relative humidity-Part 1 : Aspirated psychrometer method
GSO ISO 4677-1:2008 Atmospheres for conditioning and testing-Determination of relative humidity-Part 1 : Aspirated psychrometer method
OS GSO 587:1995 METHODS OF TEST FOR LOW PRESSURE REGULATORS FOR VALVES OF LIQUEFIED PETROLEUM GAS CYLINDERS
OS GSO ISO 4677-2:2008 Atmospheres for conditioning and testing-Determination of relative humidity-Part 2 : Whirling Psychrometer Method
GSO 587:1995 METHODS OF TEST FOR LOW PRESSURE REGULATORS FOR VALVES OF LIQUEFIED PETROLEUM GAS CYLINDERS
BH GSO ISO 15592-2:2016 Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 2: Atmosphere for conditioning and testing
GSO ISO 15592-2:2013 Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 2: Atmosphere for conditioning and testing
GSO ISO 2503:2010 Gas welding equipment -- Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
GSO ISO 10524-4:2015 Pressure regulators for use with medical gases -- Part 4: Low-pressure regulators
BH GSO ISO 6953-2:2016 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
OS GSO ISO 6953-2:2015 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
GSO ISO 6953-2:2015 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
OS GSO ISO 10524-4:2015 Pressure regulators for use with medical gases -- Part 4: Low-pressure regulators
GSO ISO 187:2002 Paper board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples.

British Standards Institution (BSI)

PD ISO/TS 19870:2023 Hydrogen technologies. Methodology for determining the greenhouse gas emissions associated with the production, conditioning and transport of hydrogen to consumption gate
BS ISO 15592-2:2001 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Atmosphere for conditioning and testing
BS EN 738-2:1999 Pressure regulators for use with medical gases - Manifold and line pressure regulators
BS EN ISO 10524-4:2009 Pressure regulators for use with medical gases. Low-pressure regulators
BS EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Low-pressure regulators
BS EN ISO 10524-3:2006+A1:2013 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
BS EN ISO 10524-3+A1:2008 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
BS EN ISO 10524-3:2008 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
BS ISO 6953-2:2015 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Test methods to determine the main characteristics to be included in literature from suppliers
BS EN ISO 10524-3:2006 Pressure regulators for use with medical gases - Pressure regulators integrated with cylinder valves
BS EN 738-3:1999 Pressure regulators for use with medical gases - Pressure regulators integrated with cylinder valves
BS EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 50 kPa
BS ISO 10294-3:1999 Fire-resistance tests - Fire dampers for air distribution systems - Guidance on the test method
BS ISO 16358-1:2013 Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factors. Cooling seasonal performance factor
BS ISO 16358-1:2013+A1:2019 Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factors. Cooling seasonal performance factor
BS ISO 16358-2:2013 Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factors. Heating seasonal performance factor
BS EN 738-1:1997 Pressure regulators for use with medical gases - Pressure regulators and pressure regulators with flow metering devices
BS EN ISO 10524-2:2007 Pressure regulators for use with medical gases - Manifold and line pressure regulators
BS ISO 10263-4:2009 Earth-moving machinery - Operator enclosure environment - Heating, ventilating and air conditioning (HVAC) test method and performance
BS EN ISO 10524-3:2019 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves (VIPRs)
BS ISO 6953-2:2024 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators - Part 2: Test methods to determine the main characteristics to include in supplier’s literature
BS EN ISO 10524-1:2019+A1:2023 Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow-metering devices
BS EN IEC 60665:2019 A.C. ventilating fans and regulators for household and similar purposes. Methods for measuring performance
BS EN ISO 10524-1:2019 Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow-metering devices
BS ISO 10294-1:1997 Fire-resistance tests - Fire dampers for air distribution systems - Test method
BS EN 738-4:1999 Pressure regulators for use with medical gases - Low-pressure regulators intended for incorporation into medical equipment
BS 2782-10 Method 1004:1977 Methods of testing plastics. Glass reinforced plastics. Standard atmospheres for conditioning and testing
BS EN 12078:1998 Zero governors for gas burners and gas burning appliances
BS EN 88-1:2007 Pressure regulators and associated safety devices for gas appliances - Pressure regulators for inlet pressures up to and including 500 mbar
BS EN ISO 10524-2:2019 Pressure regulators for use with medical gases. Manifold and line pressure regulators

CZ-CSN

CSN 07 8685-1981 Argon regulator
CSN 07 8681-1981 Hydrogen regulator
CSN 07 8677-1981 Oxygen regulators
CSN 30 3561-1961 Air brakes. Pressure regulátor
CSN 18 5305-1986 Pneumatic regulators for automation. Classification, generál technical require-ments and testing methods

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R S.742-1992 Spectrum Utilization Methodologies - Section 4D2 - Coordination Methods

CEN - European Committee for Standardization

EN ISO 10524-2:2019 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
EN ISO 10524-3:2019 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs)
EN 88-1:2007 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar
EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa

PT-IPQ

NP 107-1962 Tolérances et ajustements. Terminologie
NP HD 516-2000 Guide to use of low voltage harmonized cables

American Society for Testing and Materials (ASTM)

ASTM E41-92(1998) Terminology Relating to Conditioning
ASTM D6387-19 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
ASTM D6387-19(2023) Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
ASTM D7823-16 adjunct Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption&x2014Gas Chromatography/Mass Spectrometry
ASTM D7823-16 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption&x2014Gas Chromatography/Mass Spectrometry
ASTM D7823-14 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly &40;Vinyl Chloride&41; Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
ASTM D6387-99(2014)e1 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
ASTM D4920-13 Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE EQUIP IP CH 4-2008 AIR HANDLING AND DISTRIBUTION
ASHRAE 90138-2009 DAMPERS AND AIRFLOW CONTROL

BR-ABNT

ABNT P-MB-186-1972 Air conditioner facilities
ABNT P-EB-110-1955 Petroleum Liquefied Gas Pressure Regulator

Underwriters Laboratories (UL)

UL 252-2017 UL Standard for Safety Compressed Gas Regulators (Tenth Edition; Reprint with Revisions Through and Including August 10@ 2018)
UL 252-2010 UL Standard for Safety Compressed Gas Regulators (Ninth Edition; Reprint with Revisions Through and Including January 28, 2015)
UL 144-2021 UL Standard for Safety LP-Gas Regulators
UL 144-1999 UL Standard for Safety LP-Gas Regulators Seventh Edition; Reprint with Revisions Through and Including January 18,2002
UL 252-1984 Compressed gas regulators
UL 252A-2019 Compressed gas regulator accessories
UL 252A-2003 Compressed gas regulator accessories

Compressed Gas Association (U.S.)

CGA E-4-2016 Standard for gas pressure regulators
CGA E-4-2006 STANDARD FOR GAS PRESSURE REGULATORS FIFTH EDITION

U.S. Air Force

AIR FORCE A-A-59721 VALID NOTICE 1-2009 Load, Bank, Electrical

Underwriter Laboratories of Canada (ULC)

CSA ANSI/CAN/UL 144-2021 LP-Gas Regulators

HU-MSZT

MNOSZ 14635-1956 Surveying prints. Two-point adjustment method

German Institute for Standardization

DIN EN ISO 10524-2:2006 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005); English version of DIN EN ISO 10524-2:2006-07
DIN EN 88-1:2016-06 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa; German version EN 88-1:2011+A1:2016 / Note: To be replaced by DIN EN 88-1 (2020-06).
DIN EN 88-2:2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; English version of DIN EN 88-2:2008-03
DIN EN 88-1:2020-06 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa; German and English version prEN 88-1:2020 / Note: Date of issue 2020-05-08*Intended as replacement for DI...
DIN EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008); German version EN ISO 10524-4:2008
DIN EN 88-2:2020-06 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; German and English version prEN 88-2:2020 / Note: Date of issue 2020-05-08*Intended as repl...
DIN EN 88-1:2020 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa; German and English version prEN 88-1:2020
DIN EN 88-1:2008 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar; English version of DIN EN 88-1:2008-04
DIN ISO 15592-2:2005-05 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing (ISO 15592-2:2001)
DIN EN ISO 10524-4:2008-09 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008); German version EN ISO 10524-4:2008
DIN EN 88-2:2008-03 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; German version EN 88-2:2007 / Note: To be replaced by DIN EN 88-2 (2015-01), DIN EN 88-2 (2...

Danish Standards Foundation

DS/ISO 15592-2:2001 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing
DS/EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
DS/EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
DS/EN 88-2:2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
DS/EN 13787:2002 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar

United States Navy

NAVY MIL-G-18916 (3)-1985 GOVERNORS, STEAM DRIVEN PUMP PRESSURE REGULATING, NAVAL SHIPBOARD
NAVY MIL-G-18916-1955 GOVERNORS, STEAM DRIVEN PUMP PRESSURE REGULATING, NAVAL SHIPBOARD
NAVY MIL-C-19064 B VALID NOTICE 1-1991 CONNECTOR, OXYGEN HOSE TO REGULATOR
NAVY MIL-C-19064 B NOTICE 3-2005 CONNECTOR, OXYGEN HOSE TO REGULATOR
NAVY MIL-C-19064 B-1964 CONNECTOR, OXYGEN HOSE TO REGULATOR
NAVY MIL-C-19064 B (2)-1978 CONNECTOR, OXYGEN HOSE TO REGULATOR
NAVY MIL-A-19865 C-1990 AIR CONDITIONER, MECHANICALLY REFRIGERATED
NAVY MIL-R-6018 C-1966 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C (1)-1971 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C NOTICE 1-1996 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY QPL-23098-12 NOTICE 1-2008 Regulators, Line Voltage, Single Phase, 400 Hertz A.C. Naval Shipboard

IN-BIS

IS 6901-1988 Specification for gas cylinder pressure regulators for use in welding, cutting and related processes
IS 2943-1991 Raw silk—Method for determination of regulated size (count)
IS 1391-1971 Specifications for indoor air conditioners
IS 10936-1984 Heald frame coordination dimensions related to heald frame pitch

European Committee for Standardization (CEN)

EN ISO 10524-2:2006 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
EN 88-2:2022 Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
EN 585:1994 Gas Welding Equipment - Pressure Regulators for Gas Cylinders Used in Welding, Cutting and Allied Process up to 200 Bar

ES-UNE

UNE-EN IEC 60665:2019 A.C. ventilating fans and regulators for household and similar purposes - Methods for measuring performance
UNE-EN 88-1:2012+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa

KR-KS

KS B 8213-2009(2024) Pressure regulators and associated safety devices for gas appliances－Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
KS B ISO 2503-1-2002 Gas welding equipment－Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
KS C IEC 60665-2023 A.C. ventilating fans and regulators for household and similar purposes — Methods for measuring performance
KS B 6213-2009(2024) Liquefied petroleum gas regulators for domestic use
KS W 5092-2003(2023) AC generators and associated regulators for aircraft

ET-QSAE

ES O.B9.020-1973 Paper and board method for conditioning test specimens

Lithuanian Standards Office

LST EN 88-1-2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
LST EN 13787-2002 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
LST EN 88-2-2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar

VN-TCVN

TCVN 7741-4-2010 Pressure regulators for use with medical gases.Part 4: Low-pressure regulators
TCVN 7741-3-2007 Pressure regulators for use with medical gases.Part 3: Pressure regulators integrated with cylinder valves
TCVN 7741-1-2007 Pressure regulators for use with medical gases.Part 1: Pressure regulators and pressure regulators with flow-metering devices

Defense Logistics Agency

DLA MIL-R-19180 B-1989 REGULATOR, PRESSURE, COMPRESSED GAS
DLA MIL-R-19180 B NOTICE 1-1998 REGULATOR, PRESSURE, COMPRESSED GAS

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO C449-1980 Air Brake Slack Adjuster

ES-AENOR

UNE 100-152-1988 Air conditioning. Pipe bearing capacity

UNKNOWN

YY 0116-1993 Medical room air conditioner
YY 0116-93 Medical room air conditioner

RO-ASRO

STAS 10750-1988 Ventilating and air conditioning installations DAMPERS Classification and typification

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 79-2015 Method of Testing for Rating Fan-Coil Conditioners
ASHRAE 158.2-2006 Methods of Testing Capacity of Refrigerant Pressure Regulators
ASHRAE 79-2002 Method of Testing for Rating Fan-Coil Conditioners
ASHRAE 158.2-2011 Methods of Testing Capacity of Refrigerant Pressure Regulators
ASHRAE 79 ERTA-2014 Method of Testing for Rating Fan-Coil Conditioners
ASHRAE 158.2-2018 Methods of Testing Capacity of Refrigerant Pressure Regulators
ASHRAE 3640-1993 Method to Account for Energy Conservation Measure Interactions