tetrazole polyacrylonitrile
tetrazole polyacrylonitrile, Total:340 items.
The international standard classification for "tetrazole polyacrylonitrile" includes: Reinforced plastics , Thermoplastic materials , Plastics , food products in general , Plastics pipes , Organic chemicals , Rubber , Textiles in general , Man-made fibres , Plastics pipes, fittings and valves , Seals, glands , Road construction , Occupational safety. Industrial hygiene .
The Chinese standard classification for "tetrazole polyacrylonitrile" includes: Fibre reinforced composites , Synthetic resin and plastic , Basic standards and general methods for synthetic resin and plastic , Food sanitation , Plastic profile , General organic chemicals , Hygiene, safety and labor protection , Synthetic rubber , Basic standards and general methods , Chemical fibre , Chemical fibre in general , Sealing and sealing device , Highway engineering , Labor sanitation , Sampling methods for solid waste, soil and other environmental elements .
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 7717.12-1994 Acrylonitrile for industrial use-Determination of content of acetonitrile acetone and acrolein-Gas chromatographic method
- GB/T 24797.3-2014 Film for wrapping rubber bales―Part 3:Ethylene-propylene-diene rubber(EPDM),acrylonitrilebutadiene rubber(NBR),hydrogenated nitrile-butadiene rubber(HNBR),acrylic-ethylene rubber(AEM) and acrylic rubber(ACM)
- GB/T 20389-2006 Determination of acrylonitrile residues in acrylic fibre
- GB 12672-1990 Acrylonitrile-butadiene-styrene (ABS) resin
- GB/T 23442-2009 Determination of structure and morphology for the precursors of polyacrylonitrile-based carbon fibers
- GB/T 26752-2020 PAN-based carbon fibre
- GB/T 5009.152-2003 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for foods pack
- GB/T 17338-1998 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging
- GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride)(PVC - C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-styrene-acrylester (ASA) f
- GB 30609-2014 National Food Safety Standard - Food Additives - Polyoxyethylene Polyoxypropylene Pentaerythritol Ether
- GB/T 31403-2015 Plastics―Acrylonitrile-butadiene-styrene/poly(methyl methacrylate) alloy
- GB 7717.1-1994 Acrylonitrile for industrial use. Specifications
- GB/T 26752-2011 PAN-based carbon fibre
- GB/T 7717.3-1987 Acrylonitrile--Determination of acrylonitrile content
- GB/T 7717.1-1994 Acrylonitrile for industrial use—Specifications
- GB/T 12672-2009 Acrylonitrile-butadiene-styrene(ABS)resin
- GB/T 8661-2008 Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method
Jilin Provincial Standard of the People's Republic of China
- DB22/T 2589-2016 Polyacrylonitrile-based carbon fiber cloth
Military Standard of the People's Republic of China-General Armament Department
- GJB 2154A-2021 Specification for polyacrylonitrile based plain weave carbon cloth
- GJB 8484-2015 Specification for polyacrylonitrile carbon fiber
- GJB 2050-1994 Specification for carboxyl-terminated polybutadiene acrylonitrile
- GJB 3942-2000 Specification for polyacrylonitrile preoxidized fibers for aerospace applications
- GJB 8764-2015 Specification for polyacrylonitrile fibrils for carbonization
- GJB 1980-1994 Specification for polyacrylonitrile drug wrap cloth
- GJB 1981-1994 Specification for polyacrylonitrile medicine package rope
- GJB 3943-2000 Specification for monolithic mats of polyacrylonitrile preoxidized fibers
- GJB 2154-1994 Specification for polyacrylonitrile based plain weave carbon cloth
- GJB 2050A-2020 Specification for carboxyl-terminated polybutadiene acrylonitrile
Professional Standard - Textile
- FZ/T 50032-2015 Determination of residual solvent content in PAN-based carbon fiber precursors
- FZ/T 01140-2017 Textiles-Quantitative chemical analysis-Mixtures of acrylic and certain modacrylic fibres
- FZ/T 54065-2012 PAN-based carbon fiber precursors
- FZ/T 52021-2012 Acrylic staple fiber modified with milk protein
- FZ/T 54130-2021 PAN-based carbon fiber large-tow precursor
- FZ/T 50043-2018 PAN-Based carbon fiber precursors-Test method for oil content
未注明发布机构
- DIN EN ISO 19066-2 E:2019-04 Plastic Methyl Methacrylate Acrylonitrile Butadiene Styrene (Draft)
- GJB 5335-2004 Specification for polyacrylonitrile fibrils for carbonization
- DIN EN ISO 19065-2 E:2018-03 Plastics Acrylonitrile Styrene Acrylate (Draft)
- DIN EN ISO 19062-2 E:2018-03 Plastics Acrylonitrile Butadiene Styrene (Draft)
- DIN EN ISO 19064-2 E:2019-04 Plastic Styrene Acrylonitrile (Draft)
- DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
Group Standards of the People's Republic of China
- T/NBSL 002-2022 Flame Retardant ABS
- T/GDPIA 51-2022 Anti-squeaking PC/ABS material for automotive interiors
- T/CIQA 79-2024 Recycled raw material of polyacrylonitrile fibers
- T/JCBD 7-2022 Jizhijipin polyacrylonitrile-based carbon fiber precursor
- T/CSTM 00882-2023 Industrial grade PAN-based large-tow carbon fiber filament
- T/CAMDI 004-2016 Acrylonitrile-butadiene-styrene copolymer (ABS) special material for infusion and blood transfusion equipment
- T/CPCIF 0010-2017 Polyoxyethylene polyoxypropylene pentaerythritol ether for industry
- T/SHPTA 066-2023 Plastics-Modified Polycarbonate / acrylonitrile-butadiene-styrene (PC / ABS) material for vehicle
- T/SHXH 012-2016 Filtrate reducers for drilling fluids―Salts of hydrolyzed polyacrylonitrile
- T/CSTM 00008-2019 Oxidized polyacrylonitrile（PAN）-based crimped staple fiber
- T/CSTM 00538-2021 Liquid acrylonitrile-butadiene rubber
- T/SDCA 016-2021 Taishan Quality-High modulus PAN-based carbon fiber
Professional Standard - Chemical Industry
- HG/T 21561-1994（编制说明） Acrylonitrile Butadiene Styrene (ABS) Pipe and Fittings
- HG/T 2737-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) ball valve
- HG/T 2643-2023 Non-metallic chemical equipment - Acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polypropylene homopolymer (PPH), polyvinylidene fluoride (PVDF) and glass fiber reinforced polypropylene (FRPP) diaphragm valve
Professional Standard - Light Industry
- QB/T 2894-2007 Acrylonitrile-butadiene-styrene(ABS) color masterbatch
- QB/T 2029-1994 ABS/PVC Sheet Material
Professional Standard - Agriculture
- 水和废水监测分析方法 4.4.12-2003 Part Four Organic Pollutants Chapter Four Determination of Specific Organic Compounds Dodecacrylonitrile and Acrolein
- JAP-013 Oxaconazole, benzoconazole, cyproconazole, siclozine, thifurin, tetrakridine, tebuconazole, triaconazole, l fludioxonil, propiconazole, hexaconazole and penconazole Detection method
中国石油天然气总公司
- SY/T 5316-1994 Hydrolysis of polyacrylonitrile-ammonium salt in drilling fluid
- SY/T 5063-1994 Hydrolysis of polyacrylonitrile-calcium salt in drilling fluid
- SY/T 5062-1994 Water decomposition of polyacrylonitrile--sodium salt in drilling fluid
Professional Standard - Machinery
- JB/T 7852-1995 Specifications of polyacrylonitrile preoxidized fiber for braided packing
- JB/T 7852-2008 Specifications of pre-oxidized polyacrylonitrile fiber used for braided packing
- JB/T 10819-2008 Specifications for polyacrylonitrile braided packing
Professional Standard - Traffic
- JT/T 525-2004 Fiber for cement concrete in highway - polypropylene fiber and acrylic fiber
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
- GB/T 36089-2018 Acrylonitrile-butadiene rubber(NBR)
Anhui Provincial Standard of the People's Republic of China
- DB34/T 2434-2015 Quantitative chemical analysis of textiles blends of polyacrylonitrile fibers, certain modacrylic fibers and cotton (formic acid/zinc chloride method)
Professional Standard - Petrochemical Industry
- SH 1540-1993 Styrene/Acrylonitrile (SAN) Copolymer Molding and Extrusion Nomenclature
- SH/T 1503-2014 Rubber-Nitrile latez-Determination of bound acrylonitrile content
Fujian Provincial Standard of the People's Republic of China
- DB35/T 1641-2017 Acrylonitrile-styrene-acrylate terpolymer (ASA) synthetic resin tile technical conditions
中华人民共和国国家卫生和计划生育委员会
- GBZ/T 300.133-2017 Determination of toxic substances in workplace air— Part 133: Acetonitrile, acrylonitrile and methylacrylonitrile
Professional Standard - Environmental Protection
- HJ 679-2013 Soil and sediment - Determination of acrolein, acrylonitrile, acetonitrile Headspace-Gas chromatography method
- HJ 874-2017 Solid waste - Determination of acrolein, acrylonitrile and acetonitrile - Headspace gas chromatography method
工业和信息化部
- SH/T 1831-2020 Determination of free acrylonitrile content in acrylonitrile-butadiene rubber-Headspace gas chromatography
- QB/T 5621-2021 Technical specification for recycling and recycling of acrylonitrile-butadiene-styrene copolymer (ABS) classification
Professional Standard - Commodity Inspection
- SN/T 3470.1-2013 Rubber||raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR). Part 1:Combustion method
GM Europe
- GME QK 000222-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
- GME QK 000223-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
- GME QK 000225-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
- GME QK 000221-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
- GME QK 000220-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English Translation Available
- GME QK 000224-1996 Styrol-Acrylnitril-Copolymerisat mit Glasfasern Styrene-Acrylonitrile-Copolymer with Glass Fibres English Translation Available
- GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
- GME QK 001244-1998 Acrylnitril-Butadien-Styrol-Terpolymerisat Methylmethacrylate-Acrylonitrile-Butadiene-Styrene-Polymer English Translation Available
- GME QK 000242-2009 Acrylic Ester-Styrene-Acrylonitrile-Terpolymer (English/German)
- GME QK 000172-2005 Acrylate-Styrene-Acrylonitrile Terpolymer English/German
- GME QK 000234-1996 Acrylester-Styrol-Acrylnitril-Terpolymerisat Acrylic Ester-Styrene-Acrylonitrile-Terpolymer English/German
- GME QK 000234-2010 Acrylate-styrene-acrylonitrile terpolymer English/German. 3rd edition
- GME TM 410100-1982 ABS/PVC-Folie ABS/PVC-Foil German
- GME QK 000226-2010 Acrylate-styrene-acrylonitrile terpolymers. 3rd edition English/German
- GME QK 001952-2003 ABS ABS English/German
- GME QK 000243-2010 Acrylate-styrene-acrylonitrile terpolymer. 1st edition. English/German
- GME TM 410300-1974 ABS/PVC - Folie ABS/PVC - Foil German
- GME STD 518755-1997 Plastic 8755 PVC/ABS Plast 8755 PVC/ABS English/Swedish
- GME QK 000262-1996 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene-Styrene Terpolymer English/German
- GME TM 410800-1986 ABS/PVC-Folie ABS/PVC-Foil German
- GME QK 001956-2003 ABS ABS English/German
- GME TM 410900-1986 ABS/PVC-Folie ABS/PVC-Foil German
- GME QK 001249-1993 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene Styrene-Terpolymer English/German
- GME QK 001951-2003 ABS ABS English/German
- GME TM 411300-1976 ABS-Folie ABS-Foil German
- GME QK 001951-2009 Acrylnitril-Butadien-Styrol Terpolymerisat Acrylonitrile-Butadien-Styrene Terpolymer English/German
- GME QK 001251-1991 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene-Styrene-Terpolymer English/German
- GME QK 000273-1996 Acrylnitril-Butadien-Styrol Terpolymerisat Acrylonitrile-Butadiene-Styrene-Terpolymer English/German
- GME TM 412100-1996 ABS/PVC-Folie ABS/PVC-Foil English/German
- GME TM 411700-1996 ABS/PVC-Folie ABS/PVC-Foil English/German
- GME TM 411500-1981 ABS/PVC-Folie ABS/PVC-Foil German; Includes Appendix
- GME QK 000269-1999 Acrylonitrile-Butadiene-Styrene Copolymer (ABS) Molding Compound English/German
- GME QK 001271-2010 Mixtures of polyamide 6 and acrylonitrile-styrene-acrylate (Issue 1; English/German)
- GME QK 000226-1996 Acrylester-Styrol-Acrylnitril-Copolymerisat Acrylic Ester-Styrene-Acrylonitrile-Copolymer English/German [Replaced: GME QK 000220, GME QK 000220]
- GME TM 410700-1974 ABS/PVC-Folie ABS/PVC-Foil German; Includes Appendix
- GME STD 518731-1995 Plastic 8731 ABS Plast 8731 ABS English/Swedish
- GME STD 518743-1998 Plastic 8743 ABS Plast 8743 ABS English/Swedish
- GME QK 000302-1983 ABS-PVC-Formmasse (Regenerat) ABS-PVC-Compound (Regenerated Material) German
- GME QK 002500-2006 Reinforced blend of acrylonitrile-butadiene-styrene copolymer (ABS) and acrylic-styrene-acrylonitrile (ASA) English/German
- GME QK 000288-2005 ABS-Moulding Compound (English/German)
- GME QK 000317-1983 ABS-Formmasse ABS-Moulding Compounds English/German
- GME STD 518361-2001 Plastic 8361 ABS Plast 8361 ABS English/Swedish
- GME QK 001958-2003 ABS mit Glasfasern ABS with Glass Fibres English/German
- GME QK 000195-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German
- GME QK 000227-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German
- GME STD 518739-2002 Plastic 8739 ABS+PA6 Plast 8739 ABS+PA6 English/Swedish
- GME QK 001246-1984 ABS/PVC-Blend (Revision 2; English/German; This standard may be applied only for current programs. It is inactive for all future projects and without replacement. If this product should be used for a new project, a Re-Certification according to GMW15702 i
- GME QK 000291-1999 Acrylonitrile Butadiene Styrene Copolymer (ABS) English/German [Replaces: GME QK 000298]
- GME QK 000301-1983 ABS-PVC-Compound Folienmaterial ABS-PVC-Compound Foil Material German
- GME QK 000188-2003 Blend from PC and ABS Blend from PC and ABS English/German
- GME QK 001248-1988 ABS/PVC-Blend ABS/PVC-Blend English/German
- GME QK 001955-2003 Blend from ABS and PC Blend from ABS and PC English/German
- GME QK 000216-2005 Blend from ABS and PC (English/German)
- GME QK 001961-2005 Blend from ABS and PC Blend from ABS and PC English/German
- GME QK 000195-2010 Blend from PC and ABS (English/German)
- GME QK 000312-1996 Acrylnitril-Butadien-Styrol-Terpolymerisat Acrylonitrile-Butadiene-Styrene-Terpolymer English/German [Replaced: GME QK 000313]
- GME QK 001962-2007 ABS mit Glasfasern ABS with Glass Fibres English/German [Replaced: GME QK 001957]
- GME QK 002200-1999 Acrylonitrile-butadiene-styrene copolymer (ABS) with glass fiber (GF). English/German
- GME QK 000240-2007 Acrylonitrile-butadiene-styrene copolymer (ABS) and polyamide blends with mineral materials English/German
PL-PKN
- PN P80015-1989 Textiles raw materialsPolyacrylonitrile cable Anilana
- PN P80010-1988 Textile raw materials Polyacrylic fibres Anilana
- PN P80011-1989 Textile raw materials Polyacrylic fibres dyedAnilana
- PN C04627-02-1991 Water and waste water Tests for acrylonitryle Determination of acrylonitryle with mercaptoethanol method
- PN C05069-1992 Nitrile latex. Determination of residual acrylonitrile content
- PN C05071-1992 Nitrile latex. Determination of bound akrylonitrille content
GM Daewoo
- GMKOREA EDS-M-4308-2012 Acrylonitrile-styrene-acrylate copolymer
- GMKOREA EDS-M-4315-2012 Blow molding acrylonitrile-butadiene-styrene copolymer
- GMKOREA EDS-M-4309-2012 Weather Resistant Acrylonitrile-Butadiene- Stylene Copolymer
- GMKOREA EDS-M-4301-2012 Heat Resistance Acrylonitrile- Butadiene-Styrene Copolymer
- GMKOREA EDS-M-4305-2012 Matt acrylonitrile-butadiene-styrene copolymer
- GMKOREA EDS-M-5135-2012 Polyamide 6 / Acrylonitrile- Butadiene-Styrene Copolymer Blend
- GMKOREA EDS-M-4644-2012 Acrylonitrile Butadiene Styrene Copolymer / Polycarbonate Blend (III)
- GMKOREA EDS-M-4325-2012 10% Talc Filled Acrylonitrile- Butadiene-Styrene Copolymer
- GMKOREA EDS-M-4303-2012 Heat resistance and impact strength Acrylonitrile-butadiene-styrene copolymer
- GMKOREA EDS-M-4642-2012 Acrylonitrile Butadiene Styrene Copolymer / Polycarbonate Blend for Metal Plating
RO-ASRO
- STAS 10024-1975 ACRYLONITRILE- BUTADIENE - STYRENE COPOLYMER
- STAS 12152-1989 ACRYLON1TRILE
- STAS 11470-1989 EXTRUDED FLAT PLATES OF AGRYLONITRILEBUTADIENESTYRENIG COPOLYMER
- STAS 11204-1986 Organic dyes CATIONIC DYES FOR POLYACRY LON1TRILIG FIBRES DYEING
Korean Agency for Technology and Standards (KATS)
- KS K 0363-1985 Identification of polyacrylonitrile fibers
- KS K 0363-2014 Identification of polyacrylonitrile fibers
- KS M ISO 4581:2016 Plastics ? Styrene/acrylonitrile copolymers－Determination of residual acrylonitrile monomer content－Gas chromatography method
- KS M ISO 4581-2021 Plastics ? Styrene/acrylonitrile copolymers－Determination of residual acrylonitrile monomer content－Gas chromatography method
- KS M ISO 4581:2006 Plastics ? Styrene/acrylonitrile copolymers-Determination of residual acrylonitrile monomer content-Gas chromatography method
- KS M ISO 4581-2016(2021) Plastics?Styrene/acrylonitrile copolymers－Determination of residual acrylonitrile monomer content－Gas chromatography method
- KS K 0363-2010 Identification of polyacrylonitrile fibers
- KS M 3360-2002 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
- KS M 3360-1981 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
- KS M 3017-2011 Testing methods for acrylonitrile
- KS M 3351-1982 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
- KS M 3360-2001 STYRENE-ACRYLONITRILE COPOLMER MOLDING AND EXTRUSION MATERIALS
- KS M 3347-1986 Acrylonitrile-butadiene-styrene(ABS) sheets
- KS M ISO 12092:2005 Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure-Resis
- KS M 3017-2021 Testing methods for acrylonitrile
- KS M 3017-2016(2021) Testing methods for acrylonitrile
- KS M 3347-2022 Acrylonitrile-butadiene-styrene(ABS) sheets
- KS M 3351-1979(1997) ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
- KS M ISO 12092-2005(2015) Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride)(PVC－U), chlorinated poly(vinyl chloride) (PVC－C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-
- KS M 3347-2016 Acrylonitrile-butadiene-styrene(ABS) sheets
- KS M 3351-2002 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
- KS M 3347-2016(2021) Acrylonitrile-butadiene-styrene(ABS) sheets
- KS M 3347-2011 Acrylonitrile-butadiene-styrene(ABS) sheets
- KS M 3017-2016 Testing methods for acrylonitrile
- KS M ISO 24698-2:2010 Rubber, raw－Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR)－Part 2：Kjeldahl method
- KS M ISO 4658:2011 Acrylonitrile-butadiene rubber(NBR)-Evaluation procedure
British Standards Institution (BSI)
- BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
- BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
- BS EN ISO 19065-2:2019 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Preparation of test specimens and det...
- BS 2782-4 Method 453C:1996 Methods of testing plastics. Chemical properties. Determination of residual acrylonitrile monomer content in styrene/acrylonitrile copolymers using gas chromatography
- BS EN ISO 2507-3:2017 Thermoplastics pipes and fittings. Vicat softening temperature.Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
- BS 5392-1:2006 Acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe - Specification
- BS ISO 24698-2:2008 Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Kjeldahl method
- BS ISO 24698-1:2008 Rubber, raw - Determination of bound Acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Combustion (Dumas) method
- BS ISO 4658:2020 Acrylonitrile-butadiene rubber (NBR). Evaluation procedure
- BS ISO 24048:2022 Plastics. Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
GSO
- GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
- OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
- BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
- OS GSO ISO 4581:2013 Plastics-Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method
- OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
- GSO ISO 4581:2013 Plastics-Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method
- BH GSO ISO 4581:2016 Plastics-Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method
- GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
Lithuanian Standards Office
- LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
Danish Standards Foundation
- DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
YU-JUS
- JUS F.B2.071-1977 Polyacrylonitrile filament tow. Technical requirements
- JUS F.B2.072-1977 Polyacrylonitrile tops converter. Technical requirements
- JUS ISO 4581:1992 Plastics. Styrene/acrylonitrile copolymers. Determination of residual acrylonitrile monomer content. Gas chromatography method
- JUS ISO 2561:1992 Plastics. Determination of residual styrene monomer in polystyrene. Gas chromatographic method
- JUS F.B1.071-1977 Polyacry]omtrile fibres. Technical requirements for staple fibres
- JUS G.C1.073-1984 Rubber, raw styrene — butadien, emulsion polymerized. Test recipe and method of evaluation.
German Institute for Standardization
- DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
- DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- DIN EN ISO 19065-2:2019-06 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
- DIN EN ISO 19065-1:2015-03 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
- DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
CEN - European Committee for Standardization
- EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
- EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- EN ISO 2507-3:2017 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/ butadiene/styrene (ABS) and acrylonitrile/styrene/ acrylic ester (ASA) pipes and fittings
AENOR
- UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
Association Francaise de Normalisation
- NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
- NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
- NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
- NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
- NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
- NF T20-816*NF ISO 8174:1987 Ethylene and propylene for industrial use. Determination of acetone, acetonitrile, propan-2-ol and methanol. Gas chromatographic method.
- NF T54-420*NF EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods.
- NF G06-007:1974 Textiles. Quantitative analysis of binary mixtures of acrylic, certain modacrylics or certain chlorofibres and certain other fibres.
SCC
- DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
- UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
- NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
- DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
- NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
- NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
- AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
- DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
- DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
- NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
- DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
- HOLDEN HN 2411-2004 ACRYLONITRILE BUTADIENE STYRENE (ABS) AND POLYAMIDE 6 ALLOYS
- HOLDEN HN 2411-2012 Acrylonitrile Butadiene Styrene ABS and Polyamide 6 Alloys
- AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
- DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
- HOLDEN HN 1577-2001 Moulding Compound - Styrene Acrylonitrile (SAN)
- ASD-STAN prEN 2962:1970 Carbon fibre filament yarn - (Polyacrylonitirle precursor) - Technical specification
- HOLDEN HN 1782-2012 ASA (Acrylonitrile-styrene-acrylate) Compounds and Blends
- BS ISO 4894-1:1990 Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials-Designation
- HOLDEN HN 1782-2001 ASA (Acrylonitrile - Styrene Acrylate) Compounds and Blends
- HOLDEN HN 1259-2007 ACRYLONITRILE BUTADIENE STYRENE (ABS) COMPOUNDS
- HOLDEN HN 1259-2012 Acrylonitrile Butadiene Styrene ABS Compounds
- HOLDEN HN 1783-2009 OSA OLEFINIC RUBBER – STYRENE – ACRYLONITRILE COMPOUNDS
SAE - SAE International
- SAE AMS3217/2C-2012 Test Slabs@ Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile@ 65 - 75
- SAE AMS3217/2-1983 Test Slabs@ Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile@ 65 - 75
- SAE AMS3217/2A-1993 Test Slabs@ Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile@ 65 - 75
- SAE AMS3217/1A-1993 Test Slabs@ Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile@ 65 - 75
- SAE AMS3217/1-1983 TEST SLABS@ ACRYLONITRILE BUTADIENE (NBR-H) High Acrylonitrile@ 65 – 75
United States Navy
- NAVY QPL-5425-21-2003 PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT
- NAVY QPL-8184-19 (1)-1996 PLASTIC SHEET, ACRYLIC, MODIFIED
- NAVY QPL-8184-19-1995 PLASTIC SHEET, ACRYLIC, MODIFIED
International Organization for Standardization (ISO)
- ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
- ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- ISO 4581:1987 Plastics; Styrene/acrylonitrile copolymers; Determination of residual acrylonitrile monomer content; Gas chromatography method
- ISO 4581:1994 Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method
- ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
- ISO 2507-3:1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
- ISO 12092:2000 Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure - R
- ISO 24048:2022 Plastics — Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
- ISO 3899:1988 Rubber; nitrile latex; determination of residual acrylonitrile content
- ISO 3900:1995 Rubber - Nitrile latex - Determination of bound acrylonitrile content
- ISO 2580-2:1982 Plastics; Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials; Part 2 : Determination of properties
European Committee for Standardization (CEN)
- EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
- EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
- EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
- EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
Japanese Industrial Standards Committee (JISC)
- JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
- JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
- JIS K 6875:1995 Testing methods for AS resins
- JIS K 6874:1995 Testing methods for ABS resins
- JIS K 6759:1995 Testing methods for acrylonitrile
- JIS K 6873:1975 Acrylonitrile-butadiene-styrene (ABS) sheets
Society of Automotive Engineers (SAE)
- SAE AMS3217/2B-2004 Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
- SAE AMS3217/2B-1998 Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
- SAE AMS3217/2D-2020 Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
- SAE AMS3217/1B-1998 Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
- SAE AMS3217/1B-2013 Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
- SAE AMS3217/1C-2019 Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
KR-KS
- KS M ISO 4581-2016 Plastics?Styrene/acrylonitrile copolymers－Determination of residual acrylonitrile monomer content－Gas chromatography method
- KS M ISO/CD 23483-2021 Determination of PAN-based carbon fibre tow characteristics — Thermal conductivity
American Society for Testing and Materials (ASTM)
- ASTM UOP1043-20 Determination of Trace Acetonitrile and Propionitrile in Polymer Grade Ethylene and Propylene by Gas Chromatography Mass Spectrometry
- ASTM D4322-96 Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
- ASTM D4322-96(2001)e1 Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
- ASTM D2282-99 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
- ASTM D2282-99e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
- ASTM D2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
- ASTM D2680-95a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
- ASTM D5508-94a(2001)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
- ASTM D2680-01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
- ASTM D1527-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
- ASTM D5508-94a Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
- ASTM D5508-94a(2009)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
- ASTM D5508-16 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
- ASTM E1178-97(2002) Standard Test Methods for Analysis of Acrylonitrile
- ASTM E1178-97 Standard Test Methods for Analysis of Acrylonitrile
- ASTM D5508-23 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
- ASTM D2751-96a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
- ASTM D2680-01(2014) Standard Specification for Acrylonitrile-Butadiene-Styrene &40;ABS&41; and Poly&40;Vinyl Chloride&41; &40;PVC&41; Composite Sewer Piping
- ASTM D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
- ASTM F2806-10e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
ES-UNE
- UNE-EN ISO 19065-2:2020 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GM North America
- GM GM9740P-1988 Acrylonitrile, Styrene and Butadiene Compositions in ABS Polymers
American National Standards Institute （ANSI)
- ANSI/ASTM D5508:1994 Test Method for Quantitation of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymers and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (08.03)
- ANSI/ASTM D3965:1999 Specification for Rigid Acrylonitrile Butadiene-Styrene (ABS) Compounds for Pipe and Fittings (08.03, 08.04)
- ANSI/ASTM D1527:2005 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
- ANSI/ASTM D4673:1998 Acrylonitrile-Butadiene-Styrene (ABS) Molding and Extrusion Materials, Specification for (08.03)
- ANSI/ASTM D4322:1996 Test Method for Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
- ANSI/ASTM D2751:2005 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
- ANSI/ASTM D2468:1996 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
IN-BIS
- IS 12540-1988 Acrylonitrile specifications
- IS 11141-1984 Acrylonitrile safety regulations
SE-SIS
- SIS 16 66 52-1966 Styrene-acrylonitrile copolymer moulding and extrusion compounds
RU-GOST R
- GOST 30713-2000 Polyacrylonitrile fibre. Determination of the concentration of acrylonitrile migration in air. Method of gas chromatography
- GOST 11097-1986 Technical acrylonitrile. Specifications
(U.S.) Ford Automotive Standards
- FORD WSK-M4D905-A1-1996 ABS, HIGH IMPACT STRENGTH EXTRUSION MOLDING COMPOUND
- FORD WSS-M4D827-A3-1995 ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND
- FORD WSS-M1P83-D1-2011 ELECTROPLATING, BRIGHT OR LOW GLOSS DECORATIVE FINISH OVER ABS, PC/ABS OR NYLON FILLED 鈥?INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4D24-A-2005 ABS COPOLYMER ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M98D31-A1-2006 LAMINATE, POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) OR POLYVINYL CHLORIDE (PVC) SKIN/POLYPROPYLENE (PP) FOAM, LOW PRESSURE MOLDING **TO BE USED WITH FORD WSS-M99P1111-A**
VN-TCVN
- TCVN 6147-3-2003 Thermoplastics pipes and fittings.Vicat softening temperature.Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
FI-SFS
- SFS-ISO 2580/2 E:1986 Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Part 2: Determination of properties
GM Global
- GMW 15582-2013 Acrylonitrile Butadiene Styrene and Polycarbonate Blend, Filled Issue 2; English
European Association of Aerospace Industries
- AECMA PREN 2105-1989 Aerospace Series Acrylonitrile-Butadiene - Rubber (NBR) Hardness 50 IRHD
- AECMA PREN 2107-1989 Aerospace Series Acrylonitrile-Butadiene - Rubber (NBR) Hardness 70 IRHD
TH-TISI
- TIS 2357-2007 Acrylonitrile.butadiene.styrene (abs) pressure pipe
Tetrazole-1,3-phthalic acid,rimsulfuron-methyl,Tetrazolium,tetrazole polyacrylonitrile,p-toluenesulfonyl tetrazole,tetrazolium light,Tetrazolium colorimetric method,tetrahydrozoline nitrate,tetrazolium solution reaction,Tetrazolium salt colorimetric test,Triphenyltetrazolium Chloride
