Bromine content of plastic

Bromine content of plastic, Total:478 items.

The international standard classification for "Bromine content of plastic" includes: Plastics in general , Physicochemical methods of analysis , Plastics , Sterilization and disinfection , Jewellery , Toys , Rubber and plastics products in general , Thermoplastic materials , Reinforced plastics , Paints and varnishes , Thermosetting materials , Carbon materials , Other wood-based panels .

The Chinese standard classification for "Bromine content of plastic" includes: Basic standards and general methods for synthetic resin and plastic , Rubber products in general , Sanitation in general , Toys , Fibre reinforced composites , Synthetic resin and plastic , Basic standard and general method for coating , Artistic handicrafts , Special carbon material , Artificial board , .

Group Standards of the People's Republic of China

T/ZAEPI 013-2023 Recycled Plastic Barrel for Hydrobromic Acid Solution Packaging Container
T/CIET 178-2023 Guidelines for assessing recycled plastic content in products
T/CPPIA 6-2021 Determination of Hexabromocyclododecane in Expanded Polystyrene and Extruded Polystyrene--Gas Chromatography-Mass Spectrometry
T/CSRA 24-2024 Requirements for Traceability of Plastic Recycling and Regeneration and Recycled Plastic Content in Plastic Products? Part 1: Post-Consumer Recycled Plastics
T/CSTM 00452-2021 Determination of hexabromocyclododecane content in coatings and related materials

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 26370-2020 Hygienic requirements for disinfectant containing bromine
GB/T 38415-2019 Determination of tetrabromobisphenol A and hexabromocyclododecanes content in toys—High performance liquid chromatography-tandem mass
GB/T 36791-2018 Determination of bromine in organic flame retardant—Oxygen bomb combustion-ion selective electrode method
GB/T 38291-2019 Determination of lead in plastic materials
GB/T 38290-2019 Determination of cadmium in plastic materials
GB/T 17832-2021 Silver jewellery alloys—Determination of silver—Volumetric (potentiometric) method using potassium bromide
GB/T 38287-2019 Determination of hexavalent chromium in plastic materials
GB/T 37638-2019 Determination of polybrominated biphenyls and polybrominated biphenyl ethers in plastic products—High performance liquid chromatography
GB/T 39715.1-2021 Plastics—Biobased content—Part 1: General principles
GB/T 37639-2019 Determination of polybrominated biphenyls and polybrominated diphenyl ethers in plastic products—Gas chromatography and mass spectrometry
GB/T 36793-2018 Determination of platicizers in rubber-plastics—Gas chromatography-mass spectrometry method
GB/T 39715.4-2021 Plastics—Biobased content—Part 4: Determination of biobased mass content
GB/T 39715.3-2021 Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content
GB/T 24282-2021 Plastics—Determination of xylene-soluble matter fraction in polypropylene
GB/T 39715.2-2021 Plastics—Biobased content—Part 2: Determination of biobased carbon content
GB/T 38292-2019 Determination of mercury in plastic materials

工业和信息化部

SH/T 1824-2019 Plastics - Determination of antimony content in thermoplastic polyester

未注明发布机构

ASTM RR-D20-1215 2000 D5630-Test Method for Ash Content in Plastics
ASTM RR-D20-1256 2012 D1603-Test Method for Carbon Black Content in Olefin Plastics
DIN 53704:1960 Testing of plastics; determination of the free phenol in phenolic moulding materials; photometrical method
DIN EN ISO 15512 E:2016-06 Determination of water content of plastics (draft)
DIN 53715:1973 Testing of plastics; determination of water content by titration according to Karl Fischer
DIN EN ISO 15512 E:2018-05 Determination of water content of plastics (draft)

Professional Standard - Commodity Inspection

SN/T 2941-2011 Determination of Melamine in Plastic Materials and Products
SN/T 2547-2010 Determination of polybromobiphenyls and polybromodiphenyl ethers in plastic—GC/MS method
SN/T 3008-2011 Determination of cadmium content in plastics and plastics products for import and export - Wet decomposition method

Professional Standard - Petrochemical Industry

SH/T 1770-2010 Plastics - Determination of water content for Polyethylene
SH/T 1839-2023 Determination of bromine content of brominated isobutene-isoprene rubber(BIIR) —X fluorescence spectrometry

海关总署

SN/T 5217-2019 Determination of Brominated Vegetable Oils in food for export

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 4616-2008 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
GB/T 3855-2005 Test method for resin content of carbon fiber reinforced plastics
GB/T 2577-1989 Test method for resin content of glass fiber reinforced plastics
GB/T 2577-2005 Test method for resin content of glass fiber reinforced plastics
GB/T 3365-2008 Carbon fiber reinforced plastics - Determination of void content and fiber volume content
GB 3855-1983 Test method for resin content of carbon fiber reinforced plastics
GB/T 44308-2024 Determination of constituent content and void content of carbon fiber and glass fiber hybrid reinforced plastics
GB/T 12006.2-2009 Plastics—Polyamides—Part 2:Determination of water content
GB/T 17832-1999 Determination of silver in silver jewellery alloys--Volumetric（potentiometric）method using potassium bromide
GB/T 38812.4-2022 Direct reduced iron—Determination of metallic iron—Bromine-methanol titrimetric method
GB/T 3855-1983 Test method for resin content of carbon fiber reinforced plastics
GB/T 4616-1984 Phenolic moulding materials;Determination of acetone soluble matter(apparent resin content of material in the unmoulded state)
GB/T 32684-2016 Plastics一Phenolic resins Determination of free formaldehyde content
GB/T 30925-2014 Plastics―Ethylene-vinyl acetate copolymer(EVAC)thermoplastics―Determination of vinyl acetate content
GB/T 41926-2022 Plastics—Epoxy resins—Determination of 1,2-glycol content
GB/T 17832-2008 Silver jewellery alloys - Determination of silver - Volumetric (potentionmetric) method using potassium bromide
GB/T 1725-2007 Paints varnishes and plastics—Determination of non-volatile-matter content
GB 26370-2010 Hygienic standard for disinfectants with bromine

Taiwan Provincial Standard of the People's Republic of China

CNS 12777-1990 Method of Test for Fiber Content of Glass Fiber Reinforced Plastics
CNS 7049-1981 Method of Test for Carbon Blank in Olefin Plastics

Professional Standard - Building Materials

JC/T 287-2010 Test methods for void content of fibre reinforced plastics

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35821-2018 Determination of biomass content in biomass/plastic composites

中华人民共和国卫生部、中国国家标准化管理委员会

GB/T 26370-2010 Hygienic standard for disinfectants with bromine

Hebei Provincial Standard of the People's Republic of China

DB13/T 1297-2010 Determination of antimony sulfide content in fireworks and firecrackers mixture Potassium bromate volumetric method

Japanese Industrial Standards Committee (JISC)

JIS K 7392:2009 Waste plastics -- Test method for total bromine contents
JIS K 7251:2002 Plastics -- Determination of water content
JIS K 0085:1983 Methods for determination of bromine in exhaust gas
JIS K 0085:1998 Methods for determination of bromine in flue gas
JIS K 7192:1999 Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content
JIS K 7146:2006 Plastics -- Epoxy resins -- Determination of 1,2-glycol content

HU-MSZT

MSZ 10192/5-1980 Plastic testing. Heavy plastic content
MSZ 10192/4-1970 Plastic testing. Hard foam (plastic) water content detection
MSZ 21470/26-1982 Soil environmental protection inspection, chlorbrofuron content determination
MSZ KGST 985-1978 Determination of decalin content in plastic resins
MSZ KGST 2351-1980 Determination of copper, iron and titanium content in plastic resins
MSZ 10192/1-1970 Plastic testing. Heavy element water content definition
MSZ KGST 1694-1979 Determination of mixture content of plastic resins
MSZ KGST 428-1944 Comprehensive plastic products. Common content definition
MSZ KGST 1426-1978 Method for determination of phosphorus content in plastic products
MSZ 10198-1962 Definition of polyamide for testing moisture content in plastics
MSZ KGST 429-1977 Plastic luminous body integrated device quiet device content
MNOSZ 11088-1953 Valve elastic plastic contains magnetic core
MSZ 7553-1961 Checking plastics by measuring the content of free ammonia and amino groups
MSZ 7251-1959 Plastic inspection, free phenol content inspection

British Standards Institution (BSI)

BS DD CEN/TS 15408:2006 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
BS EN ISO 15512:2016 Plastics. Determination of water content
BS EN 13191-2:2000 Non-fatty food - Determination of bromide residues - Determination of inorganic bromide
BS EN ISO 15512:2014 Plastics. Determination of water content
BS EN 13191-1:2000 Non-fatty food - Determination of bromide residues - Determination of total bromide as inorganic bromide
BS EN ISO 15512:2019 Plastics. Determination of water content
BS ISO 16620-4:2016 Plastics. Biobased content. Determination of biobased mass content
BS ISO 16620-4:2024 Plastics. Biobased content - Determination of biobased mass content
BS ISO 16620-2:2015 Plastics. Biobased content. Determination of biobased carbon content
BS ISO 16620-2:2019 Plastics. Biobased content - Determination of biobased carbon content
BS EN 15408:2011 Solid recovered fuels. Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
BS ISO 16620-1:2015 Plastics. Biobased content. General principles
DD CEN/TS 15408:2006 Solid recovered fuels — Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
BS DD CEN/TS 16137:2011 Plastics. Determination of bio-based carbon content
BS EN ISO 15512:2009 Plastics - Determination of water content(ISO 15512:2008)
BS EN 12118:1998 Plastics piping systems. Determination of moisture content in thermoplastics by coulometry
BS EN ISO 960:1998 Plastics — Polyamides (PA) — Determination ofwater content
BS ISO 16620-3:2015 Plastics. Biobased content. Determination of biobased synthetic polymer content
BS EN 637:1995(2000)*BS 2782-12 mtd 1205a:1995 Plastics piping systems — Glass - reinforced plastics components — Determination of the amounts of constituents using the gravimetric method
BS ISO 16620-5:2017 Plastics. Biobased content. Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
BS ISO 7725:2020 Rubber and rubber products. Determination of chlorine and bromine content
BS ISO 24047:2021 Plastics. Polyethylene (PE) and polypropylene (PP) thermoplastics. Determination of metal content by ICP-OES
BS EN ISO 14896:2009 Plastics - Polyurethane raw materials - Determination of isocyanate content
BS EN ISO 585:1991 Plastics. Unplasticized cellulose acetate. Determination of moisture content
BS EN ISO 585:1999 Plastics - Unplasticized cellulose acetate - Determination of moisture content
BS EN ISO 7510:2024 Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
BS EN 31427:1994 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide
BS ISO 7510:2017 Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
BS EN ISO 3251:2003 Paints, varnishes and plastics - Determination of non-volatile-matter content
BS EN ISO 3251:2008 Paints, varnishes and plastics. Determination of non- volatile-matter content
BS EN ISO 21627-3:2009 Plastics - Epoxy resins - Determination of chlorine content - Total chlorine
20/30396484 DC BS ISO 24047. Plastics. Polyethylene (PE) and polypropylene (PP) thermoplastics. Determination of metal content by ICP-OES
BS EN ISO 8985:2022 Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content
23/30445431 DC BS ISO 16620-4. Plastics. Biobased content - Part 4. Determination of biobased mass content
BS EN ISO 21627-1:2009 Plastics - Epoxy resins - Determination of chlorine content - Inorganic chlorine
BS EN 1905:1999 Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content
BS ISO 21048:2014 Plastics. Epoxy resins. Determination of 1,2-glycol content
19/30358810 DC BS ISO 7725. Rubber and rubber products. Determination of chlorine and bromine content
BS EN ISO 3251:2019 Paints, varnishes and plastics. Determination of non-volatile-matter content
BS EN ISO 21627-2:2009 Plastics - Epoxy resins - Determination of chlorine content - Easily saponifiable chlorine
BS EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
20/30409956 DC BS EN ISO 8985. Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content

SCC

BS EN ISO 15512:2003 Plastics. Determination of water content
BS ISO 15512:1999 Plastics. Determination of water content
UNE 53282:1975 PLASTICS MATERIALS. DETERMINATION OF N2 CONTENT OF RESIUS AND PLASTICS MATERIALS
SN-CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content
DANSK DS/CEN/TS 17627:2021 Plastics – Recycled plastics – Determination of solid contaminants content
BS PD CEN/TS 17627:2021 Plastics. Recycled plastics. Determination of solid contaminants content
AENOR UNE-CEN/TS 16295 EX:2013 Plastics - Declaration of the bio-based carbon content
SN-CEN/TS 16295:2012 Plastics — Declaration of the bio-based carbon content
UNE 84090:1994 COSMETIC RAW MATERIALS. TEST OF CONTENT OF STERS OF P-HYDROXYBENZOATES. BROMINATION METHOD.
DANSK DS/CEN/TS 16295:2012 Plastics - Declaration of the bio-based carbon content
AENOR UNE 53134:1968 PLASTIC MATERIALS. DETERMINATION OF THE SOLID CONTENT OF AMINOPLAST RESINS MODIFIED WITH ALCOHOLS
DANSK DS/EN ISO 15512:2019 Plastics – Determination of water content (ISO 15512:2019)
UNE-EN ISO 15512:2010 Plastics - Determination of water content (ISO 15512:2008)
NS-EN ISO 15512:2019 Plastics - Determination of water content (ISO 15512:2019)
NS-EN ISO 15512:2003 Plastics — Determination of water content (ISO 15512:1999)
DANSK DS/CEN/TS 16137:2011 Plastics - Determination of bio-based carbon content
DANSK DS/ISO 15512:2019 Plastics – Determination of water content (ISO 15512:2019)
NS-EN ISO 15512:2014 Plastics - Determination of water content (ISO 15512:2014)
SN-CEN/TS 16137:2011 Plastics — Determination of bio-based carbon content
NS-EN ISO 15512:2016 Plastics — Determination of water content (ISO 15512:2016)
UNE-EN ISO 15512:2004 Plastics - Determination of water content (ISO 15512:1999)
NS-EN ISO 15512:2009 Plastics - Determination of water content (ISO 15512:2008)
AENOR UNE-CEN/TS 16137 EX:2012 Plastics - Determination of bio-based carbon content
DIN CEN/TS 15408:2006 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content; German version CEN/TS 15408:2006
SN-CEN/TS 15408:2006 Solid recovered fuels — Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
AENOR UNE 53124:1966 Plastic materials. Determination of the solids content of aminoplast resins, in aqueous solution.
DANSK DS/ISO 16620-4:2024 Plastics – Biobased content – Part 4: Determination of biobased mass content
DANSK DS/EN 15408:2011 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
NS-EN 15408:2011 Solid recovered fuels — Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
AENOR UNE 53282:1975 Plastic materials. Determination of nitrogen content in resins and plastic materials by the Kjeldahl method.
HOLDEN HN 0177-1991 Content of Volatile Component in T10TM Plasticised Trim
DANSK DS/EN 15343:2007 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
AENOR UNE-EN 15343:2008 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
NS-EN 12118:1997 Plastics piping systems — Determination of moisture content in thermoplastics by coulometry
07/30144836 DC EN ISO 15512. Plastics. Determination of water content
AENOR UNE-EN ISO 15512:2020 Plastics. Determination of water content. (ISO 15512:2019).
NS-EN 15343:2007 Plastics — Recycled Plastics — Plastics recycling traceability and assessment of conformity and recycled content
SPC GB/T 37639-2019 Determination of polybrominated biphenyls and polybrominated diphenyl ethers in plastic products -- Gas chromatography and mass spectrometry (TEXT OF DOCUMENT IS IN CHINESE)
AENOR UNE-EN 12118:1998 PLASTICS PIPING SYSTEMS. DETERMINATION OF MOISTURE CONTENT IN THERMOPLASTICS BY COULOMETRY.
DANSK DS/EN 12118:1997 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
DIN EN 15408 E:2009 Draft Document - Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content; German version prEN 15408:2009
BS EN ISO 14896:2001 Plastics. Polyurethane raw materials. Determination of isocyanate content
DANSK DS/EN ISO 14896:2009 Plastics - Polyurethane raw materials - Determination of isocyanate content
DANSK DS/EN ISO 585:1999 Plastics - Unplasticized cellulose acetate - Determination of moisture content
BS 4839-3:1992 Plastics containers-Specification for closed head plastics drums over 70 L up to and including 250 L total capacity
DIN EN ISO 15512 E:2018 Draft Document - Plastics - Determination of water content (ISO/DIS 15512:2018); German and English version prEN ISO 15512:2018
09/30203040 DC BS EN 15408. Solid recovered fuels. Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
BS EN ISO 21627-3:2003 Plastics. Epoxy resins. Determination of chlorine content-Total chlorine
NS 9015:1981 Liquefied phenol for industrial use — Determination of phenols content — Bromination method
AENOR UNE-EN 1905:1999 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
NS-EN 1905:1998 Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material — Method for assessment of the PVC content based on total chlorine content
DANSK DS/EN 1905:1999 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on the total chlorine content
DANSK DS/ISO 8985:2022 Plastics – Ethylene/vinyl acetate copolymer (EVAC) thermoplastics – Determination of vinyl acetate content
NS-EN ISO 960:1997 Plastics — Polyamides (PA) — Determination of water content (ISO 960:1988)
NS-EN ISO 585:1999 Plastics — Unplasticized cellulose acetate — Determination of moisture content (ISO 585:1990)
DANSK DS/EN ISO 308:1998 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
DANSK DS/EN ISO 8985:1998 Plastics – Ethylene/vinyl acetate copolymer (EVAC) thermoplastics – Determination of vinyl acetate content
BS EN ISO 21627-1:2003 Plastics. Epoxy resins. Determination of chlorine content-Inorganic chlorine
BS ISO 21048:2004 Plastics. Epoxy resins. Determination of 1,2-glycol content
NS-EN ISO 14896:2009 Plastics — Polyurethane raw materials — Determination of isocyanate content (ISO 14896:2009)
CEI EN 62321/AB:2009 Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
DANSK DS/EN 62321:2009 Electrotechnical products – Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
NS-EN ISO 14896:2001 Plastics — Polyurethane raw materials — Determination of isocyanate content (ISO 14896:2000)
AENOR UNE 53401:1986 PLASTICS. POLYCARBONATE RESINS. DETERMINATION OF CONTENT IN EXTRATABLE MATERIALS
BS EN ISO 21627-2:2003 Plastics. Epoxy resins. Determination of chlorine content-Easily saponifiable chlorine
AENOR UNE-EN ISO 585:2000 PLASTICS - UNPLASTICIZED CELLULOSE ACETATE - DETERMINATION OF MOISTURE CONTENT (ISO 585:1990)
DANSK DS/ISO 3251:2019 Paints, varnishes and plastics – Determination of non-volatile-matter content
CEI EN 62321:2009 Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
UNE-EN ISO 14896:2002 Plastics - Polyurethane raw materials - Determination of isocyanate content. (ISO 14896:2000)
NS-EN ISO 8985:1998 Plastics — Ethylene/vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetate content (ISO 8985:1998)
AENOR UNE-EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998)

International Organization for Standardization (ISO)

ISO 15512:2019 Plastics — Determination of water content
ISO 15512:1999 Plastics - Determination of water content
ISO 15512:2014 Plastics - Determination of water content
ISO 15512:2008 Plastics - Determination of water content
ISO 15512:2016 Plastics - Determination of water content
ISO 9782:1993 Plastics; reinforced moulding compounds and prepregs; determination of apparent volatile-matter content
ISO/DIS 16620-4:2023 Plastics — Biobased content — Part 4: Determination of biobased mass content
ISO/PRF 16620-4:2023 Plastics — Biobased content — Part 4: Determination of biobased mass content
ISO 16620-4:2016 Plastics - Biobased content - Part 4: Determination of biobased mass content
ISO/R 960:1969 Plastics — Determination of the water content in polyamides
ISO 960:1988 Plastics; polyamides (PA); determination of water content
ISO 16620-2:2019 Plastics — Biobased content — Part 2: Determination of biobased carbon content
ISO 16620-2:2015 Plastics - Biobased content - Part 2: Determination of biobased carbon content
ISO 585:1982 Plastics - Non-plasticized cellulose acetate - Determination of moisture content
ISO 7725:2020 Rubber and rubber products — Determination of chlorine and bromine content
ISO 3251:2003 Paints, varnishes and plastics - Determination of non-volatile-matter content
ISO 585:1990 Plastics; unplasticized cellulose acetate; determination of moisture content
ISO 16620-1:2015 Plastics - Biobased content - Part 1: General principles
ISO 24047:2021 Plastics - Polyethylene (PE) and polypropylene (PP) thermoplastics - Determination of metal content by ICP-OES
ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
ISO 1904:1972 Liquefied phenol for industrial use; Determination of phenols content; Bromination method
ISO 1597:1975 Plastics; Unplasticized cellulose acetate; Determination of acetic acid yield
ISO 1597:1994 Plastics - Unplasticized cellulose acetate - Determination of acetic acid yield
ISO 7725:1991 Rubber and rubber products; determination of bromine and chlorine content; oxygen flask combustion technique
ISO 16620-5:2017 Plastics - Biobased content - Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
ISO 8985:2022 Plastics — Ethylene/vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetate content
ISO 21048:2004 Plastics - Epoxy resins - Determination of 1,2-glycol content
ISO 16620-3:2015 Plastics - Biobased content - Part 3: Determination of biobased synthetic polymer content
ISO 21048:2014 Plastics - Epoxy resins - Determination of 1,2-glycol content
ISO 9397:1989 Plastics; phenolic resins; determination of free formaldehyde content
ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content
ISO 11427:1993 Determination of silver in silver jewellery alloys; volumetric (potentiometric) method using potassium bromide
ISO 3251:2019 Paints, varnishes and plastics — Determination of non-volatile-matter content
ISO 5416:1987 Direct reduced iron; Determination of metallic iron content; Bromine-methanol titrimetric method
ISO 5416:2006 Direct reduced iron - Determination of metallic iron - Bromine-methanol titrimetric method
ISO 308:1981 Plastics; Phenolic moulding materials; Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
ISO 308:1994 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
ISO 308:1976 Title missing - Legacy paper document

CZ-CSN

CSN 64 0218-1982 Determination of the sh content of plastics
CSN 64 0322-1964 Determination of chlorine content n plastics
CSN 65 2480-1981 Sodium Chloride (Salt) Metod of Bromides Content Determination
CSN ISO 8988:1994 Plastics.Phenolic resins.Determination of hexamethylene-tetramine content

Association Francaise de Normalisation

NF T51-176*NF EN ISO 15512:2019 Plastics - Determination of water content
NF T51-176:2014 Plastics - Determination of water content
NF T20-408:1971 Sodium chloride for industrial use. Determination of bromine.
NF T54-935*NF EN 12118:1997 Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.
NF T51-356*NF EN ISO 585:1999 Plastics. Unplasticized cellulose acetate. Determination of moisture content.
NF X34-222*NF EN 15408:2011 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content.
NF ISO 9782:1994 Reinforced plastics - Compositions for molding and prepregs - Determination of the apparent volatile matter content
NF EN 15408:2011 Solid recovered fuels - Methods for the determination of sulfur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
NF EN 15343:2008 Plastics - Recycled plastics - Traceability of plastics recycling and assessment of conformity and content of recycled products
NF EN 637:1994 Plastic pipe systems - Glass-reinforced plastic components - Determination of constituent contents using the gravimetric method
NF EN 12118:1997 Plastic piping systems - Coulometric determination of water content in thermoplastic materials
NF EN ISO 14896:2009 Plastics - Polyurethane raw materials - Determination of isocyanate content
NF EN ISO 7510:2024 Plastic piping systems - Glass-reinforced plastic (GRP) components - Determination of constituent contents
NF T52-119:1985 Plastics. Base materials for polyurethanes. Polyethers. Determination the sodium and potassium content.
NF T52-130*NF EN ISO 14896:2009 Plastics - Polyurethane raw materials - Determination of isocyanate content
NF T51-176:1998 Plastics. Polyamides (PA). Determination of water content.
NF T30-084:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content.
NF T54-924*NF EN 1905:1999 Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content.
NF T51-820*NF EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
NF T51-430:1983 Plastics. Phenolic resins. Determination of water content
NF T51-820:1998 Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content.
NF EN ISO 3451-4:2000 Plastics - Determination of ash content - Part 4: polyamides

European Committee for Standardization (CEN)

EN ISO 15512:2014 Plastics - Determination of water content (ISO 15512:2014)
EN ISO 15512:2019 Plastics - Determination of water content (ISO 15512:2019)
EN ISO 15512:2009 Plastics - Determination of water content
PD CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content
CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content
PD CEN/TS 16137:2011 Plastics - Determination of bio-based carbon content
EN ISO 15512:2003 Plastics - Determination of water content ISO 15512:1999
EN ISO 15512:2016 Plastics - Determination of water content
EN ISO 177:2017 Plastics - Determination of migration of plasticizers
EN 15408:2011 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
EN 12118:1997 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
EN ISO 960:1997 Plastics - Polyamides (PA) - Determination of Water Content ISO 960:1988
EN 13191-2:2000 Non-fatty food - Determination of bromide residues - Part 2: Determination of inorganic bromide
EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022, Corrected version 2022-08)
EN ISO 1597:1999 Plastics - Unplasticized Cellulose Acetate - Determination of Acetic Acid Yield ISO 1597: 1994
EN ISO 585:1999 Plastics - Unplasticized Cellulose Acetate - Determination of Moisture Content
EN ISO 3251:2003 Paints, varnishes and plastics - Determination of non-volatilematter content ISO 3251: 2003
EN ISO 3251:2019 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)
EN ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
EN ISO 3251:1995 Paints and Varnishes - Determination of Non- Volatile Matter of Paints, Varnishes and Binders for Paints and Varnishes (ISO 3251 : 1993)
EN ISO 21627-3:2003 Plastics Epoxy resins Determination of chlorine content Part 3: Total chlorine ISO 21627-3:2002
EN 637:1994 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method
EN ISO 8985:1998 Plastics - Ethylene/Vinyl Acetate Copolymer (EVAC) Thermoplastics - Determination of Vinyl Acetate Content ISO 8985:1998
EN ISO 9397:1997 Plastics - Phenolic Resins - Determination of Free-Formaldehyde Content - Hydroxlamine Hydrochloride Method ISO 9397: 1995
EN ISO 7510:2024 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
EN ISO 11427:2016 Jewellery - Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:2014)
prEN 637-1992 Plastics piping systems; glass-reinforced plastics components; determination of constituents and their content using the gravimetric method
EN 31427:1994 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:1993)

GSO

OS GSO ISO 15512:2013 Plastics - Determination of water content
GSO ISO 15512:2013 Plastics - Determination of water content
OS GSO ISO 9782:2013 Plastics - Reinforced moulding compounds and prepregs - Determination of apparent volatile-matter content
BH GSO ISO 9782:2016 Plastics - Reinforced moulding compounds and prepregs - Determination of apparent volatile-matter content
GSO ISO 16620-4:2021 Plastics — Biobased content — Part 4: Determination of biobased mass content
BH GSO ISO 16620-4:2022 Plastics — Biobased content — Part 4: Determination of biobased mass content
GSO ISO 16620-2:2015 Plastics -- Biobased content -- Part 2: Determination of biobased carbon content
BH GSO EN 15343:2023 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
BH GSO ISO 16620-2:2017 Plastics -- Biobased content -- Part 2: Determination of biobased carbon content
GSO EN 15343:2023 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
OS GSO ISO 16620-2:2015 Plastics -- Biobased content -- Part 2: Determination of biobased carbon content
BH GSO ISO 14896:2016 Plastics -- Polyurethane raw materials -- Determination of isocyanate content
OS GSO ISO 14896:2015 Plastics -- Polyurethane raw materials -- Determination of isocyanate content
GSO ISO 14896:2015 Plastics -- Polyurethane raw materials -- Determination of isocyanate content
GSO ISO 585:2015 Plastics -- Unplasticized cellulose acetate -- Determination of moisture content
OS GSO ISO 585:2015 Plastics -- Unplasticized cellulose acetate -- Determination of moisture content
BH GSO ISO 7510:2016 Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
OS GSO ISO 7510:2015 Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
GSO ISO 21048:2013 Plastics - Epoxy resins - Determination of 1,2-glycol content
GSO ISO 16620-3:2015 Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
GSO ISO 16620-5:2021 Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
BH GSO ISO 16620-5:2022 Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
OS GSO ISO 21048:2013 Plastics - Epoxy resins - Determination of 1,2-glycol content
GSO ISO 16620-1:2015 Plastics -- Biobased content -- Part 1: General principles
BH GSO ISO 16620-1:2017 Plastics -- Biobased content -- Part 1: General principles
OS GSO ISO 16620-1:2015 Plastics -- Biobased content -- Part 1: General principles
BH GSO ISO 16620-3:2017 Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
GSO ISO 3251:2022 Paints, varnishes and plastics — Determination of non-volatile-matter content
BH GSO ISO 3251:2023 Paints, varnishes and plastics — Determination of non-volatile-matter content
GSO ISO 21627-3:2013 Plastics -- Epoxy resins -- Determination of chlorine content -- Part 3: Total chlorine

German Institute for Standardization

DIN EN ISO 15512:2019-09 Plastics - Determination of water content (ISO 15512:2019); German version EN ISO 15512:2019
DIN EN 12118:1997 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
DIN CEN/TS 17627:2021-07 Plastics - Recycled plastics - Determination of solid contaminants content; German version CEN/TS 17627:2021
DIN EN 1122:2002 Plastics - Determination of cadmium - Wet decomposition method; German version EN 1122:2001
DIN EN 15408:2011-05 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content; German version EN 15408:2011
DIN 51863-2:1983 Testing of gaseous fuels and other gases; determination of hydrogen cyanide content; bromide cyanogen method
DIN EN ISO 15512:2019 Plastics - Determination of water content (ISO 15512:2019)
DIN EN ISO 585:2000 Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990); German version EN ISO 585:1999
DIN EN 15343:2008-02 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content; German version EN 15343:2007
DIN EN 12118:1997-11 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
DIN EN 13191-1:2000 Non-fatty foods - Determination of bromide residues - Part 1: Determination of total bromide as inorganic bromide; German version EN 13191-1:2000
DIN EN ISO 14896:2009-07 Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009); German version EN ISO 14896:2009
DIN EN ISO 4589-2:2006 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996 + Amd. 1:2005)(includes Amendment A1:2006) English version of DIN EN ISO 4589-2:1999 + A1:2006-06
DIN EN ISO 585:2000-02 Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990); German version EN ISO 585:1999
DIN CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content; German version CEN/TS 17627:2021
DIN EN 13191-2:2000 Non-fatty foods - Determination of bromide residues - Part 2: Determination of inorganic bromide; German version EN 13191-2:2000
DIN EN ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008); German version EN ISO 3251:2008
DIN EN 1905:1999-02 Plastics piping systems - Unplastized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content; German version EN 1905:1998
DIN EN ISO 308:1998 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997
DIN EN ISO 8985:2022-11 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022, Corrected version 2022-08); German version EN ISO 8985:2022
DIN EN ISO 7510:2024-04 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017); German version EN ISO 7510:2024
DIN EN ISO 15061:2001 Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001); German version EN ISO 15061:2001
DIN EN ISO 7510:2023 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017); German and English version prEN ISO 7510:2023
DIN ISO 4576:2001 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
DIN EN ISO 3251:2019-09 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019); German version EN ISO 3251:2019
DIN 53704:1988 Testing of plastics; determination of the free phenol in phenolic moulding materials; photometrical method
DIN EN ISO 308:1998-03 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997
DIN 53715:1991 Testing of plastics; determination of water content by titration according to Karl Fischer
DIN EN 15408:2011 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content; German version EN 15408:2011

ES-UNE

UNE-EN ISO 15512:2020 Plastics - Determination of water content (ISO 15512:2019)
UNE 53930-1:2019 Plastics. Plastic carrier bags with high content in recycled plastic for product carriage. Part 1: General
UNE 53272:2019 Plastics. Determination of volatile content
UNE 53930-2:2019 Plastics. Plastic carrier bags with high content in recycled plastic for product carriage. Part 2: Polyethylene (PE) carrier bags
UNE-EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022, Corrected version 2022-08)

Danish Standards Foundation

DS/EN ISO 15512:2009 Plastics - Determination of water content
DS/CEN/TS 17627:2021 Plastics – Recycled plastics – Determination of solid contaminants content
DS/CEN/TS 16295:2012 Plastics - Declaration of the bio-based carbon content
DS/CEN/TS 16137:2011 Plastics - Determination of bio-based carbon content
DS/EN 15408:2011 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
DS/EN 15343:2008 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
DS/EN 12118:1998 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
DS/EN ISO 14896:2009 Plastics - Polyurethane raw materials - Determination of isocyanate content
DS/EN ISO 585:1999 Plastics - Unplasticized cellulose acetate - Determination of moisture content
DS/ENV 1122:1995 Determination of cadmium in plastics with the method of the wet decomposition
DS/EN ISO 308:1998 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
DS/EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
DS/EN 1905:1999 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on the total chlorine content
DS/EN ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content

PL-PKN

PN Z04062-1971 Air pur?ty protectton Determination of hydirogen bromide content
PN C89085-17-1986 Epoxy resins Methods of testing Determination of total chlorine and bromine content
PN C89082-13-1986 Unsaturated polyester resins Methods of testing Determination of total chlorine and bromine content

ES-AENOR

UNE 53 087 Determination of chlorine content in plastics
UNE 53-090-1984 General determination method of gray matter content in plastics

International Federation of Trucks and Engines

NAVISTAR CEMS DT-8-2004 Glass Content of Reinforced Plastics

RO-ASRO

STAS SR 8934-25-1997 Sodium chloride - Determination of bromid content - lodometric method
STAS 5798-1968 plastic. Determination of carbolic acid content
STAS 12155-1982 PLASTICIZERS FOR PLASTICS Ester content and saponification value determination
STAS 7725-1967 plastic. Determination of water content in polyamide
STAS 5797-1968 plastic. Determination of content of substances dissolved in acetone solution
STAS 10054-1975 PLASTICS Determination of the acetone soluble matter (resin content) of phenolic moulding materials

IPC - Association Connecting Electronics Industries

IPC TM-650 2.3.35B-1995 Halide Content@ Quantitative (Chloride & Bromide
IPC TM-650 2.3.35C-2004 Halide Content@ Quantitative (Chloride & Bromide)

IT-UNI

UNI CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content
UNI 5644-1965 Plastic material testing. Determination of moisture content of unplasticized cellulose acetate

American Society for Testing and Materials (ASTM)

ASTM E649-00(2005)e1 Standard Test Method for Bromine in Chlorine
ASTM E649-00 Standard Test Method for Bromine in Chlorine
ASTM E649-00(2011) Standard Test Method for Bromine in Chlorine
ASTM D6505-00 Standard Test Method for Assay of normal -Propyl Bromide Content
ASTM D6505-00(2006) Standard Test Method for Assay of normal -Propyl Bromide Content
ASTM D5630-06 Standard Test Method for Ash Content in Plastics
ASTM D5630-94 Standard Test Method for Ash Content in Thermoplastics
ASTM D6505-00(2017) Standard Test Method for Assay of normal -Propyl Bromide Content
ASTM D6505-00(2012) Standard Test Method for Assay of normal -Propyl Bromide Content
ASTM D5630-01 Standard Test Method for Ash Content in Thermoplastics
ASTM D5630-22 Standard Test Method for Ash Content in Plastics
ASTM D6505-00(2022) Standard Test Method for Assay of normal -Propyl Bromide Content
ASTM D5630-13 Standard Test Method for Ash Content in Plastics
ASTM D2734-94 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D2734-16 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D2734-94(2003) Standard Test Methods for Void Content of Reinforced Plastics
ASTM D2734-09 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D1603-01 Standard Test Method for Carbon Black In Olefin Plastics
ASTM D1603-06 Standard Test Method for Carbon Black Content in Olefin Plastics
ASTM D1603-12 Standard Test Method for Carbon Black Content in Olefin Plastics
ASTM D1603-94 Standard Test Method for Carbon Black In Olefin Plastics
ASTM D1603-14 Standard Test Method for Carbon Black Content in Olefin Plastics

AT-ON

ONR CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content

Lithuanian Standards Office

LST CEN/TS 17627-2021 Plastics - Recycled plastics - Determination of solid contaminants content
LST EN ISO 15512:2009 Plastics - Determination of water content (ISO 15512:2008)
LST EN 15408-2011 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
LST EN 15343-2008 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
LST EN 12118-2002 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
LST EN 1905-2002 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
LST EN ISO 14896:2009 Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009)
LST EN ISO 585:2000 Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990)
LST EN ISO 308:2002 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994)
LST EN ISO 8985:2001 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998)

RU-GOST R

GOST 12497-1978 Plastics. The method of epoxy group determination
GOST 11736-1978 Plastics. Method for determination of water content
GOST 33515-2015 Solid recovered fuel. Method for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
GOST R 54226-2010 Solid recovered fuels. Determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
GOST 6073-1975 Ethylated benzines. The methods for determination of the content of bromine and chlorine scavengers
GOST 8997-1989 Petroleum products. Electrometric method for determination of bromine numbers and unsaturated hydrocarbons
GOST 1036-2014 Plastic lubricants. Method of determination of mechanical impurities content
GOST 34376.3-2017 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Part 3. Determination of the ester group content

AENOR

UNE 53272:1974 PLASTICS. DETERMINATION OF VOLATILE CONTENT.
UNE-CEN/TS 16295:2013 EX Plastics - Declaration of the bio-based carbon content
UNE-CEN/TS 16137:2012 EX Plastics - Determination of bio-based carbon content
UNE-EN 15408:2011 Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
UNE-EN 15343:2008 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
UNE-EN 12118:1998 PLASTICS PIPING SYSTEMS. DETERMINATION OF MOISTURE CONTENT IN THERMOPLASTICS BY COULOMETRY.
UNE-EN 1905:1999 PLASTICS PIPING SYSTEMS. UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PIPES, FITTINGS AND MATERIALS. METHOD FOR ASSESSMENT OF THE PVC CONTENT BASED ON TOTAL CHLORINE CONTENT
UNE-EN ISO 14896:2009 Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009)
UNE-EN ISO 585:2000 PLASTICS - UNPLASTICIZED CELLULOSE ACETATE - DETERMINATION OF MOISTURE CONTENT (ISO 585:1990)
UNE-EN ISO 308:1998 PLASTICS - PHENOLIC MOULDING MATERIALS - DETERMINATION OF ACETONE-SOLUBLE MATTER (APPARENT RESIN CONTENT OF MATERIAL IN THE UNMOULDED STATE) (ISO 308:1994).
UNE-EN ISO 8985:1998 PLASTICS. ETHYLENE/VINYL ACETATE COPOLYMER (EVAC) THERMOPLASTICS. DETERMINATION OF VINYL ACETATE CONTENT. (ISO 8985:1998).

GM North America

GM GM9077P-1988 Glass Content of Glass Reinforced Plastics

TH-TISI

TIS 122-1975 Standard for lead content in plastic toys

(U.S.) Ford Automotive Standards

FORD FLTM BO 006-2-2001 DETERMINATION OF ASH CONTENT OF MOLDED MATERIALS
FORD FLTM EU-BO 006-2-2001 DETERMINATION OF ASH CONTENT OF MOULDED MATERIALS

CEN - European Committee for Standardization

PD CEN/TS 15408:2006 Solid recovered fuels - Methods for the determination of sulphur (S)@ chlorine (Cl)@ fluorine (F) and bromine (Br) content

Korean Agency for Technology and Standards (KATS)

KS M ISO 3251:2021 Paints, varnishes and plastics —Determination of non-volatile-matter content
KS M ISO 9782-2002(2022) Plastics－Reinforced moulding compounds and prepregs－Determination of apparent volatile－matter content
KS M ISO 9782-2002(2017) Plastics－Reinforced moulding compounds and prepregs－Determination of apparent volatile－matter content
KS M ISO 9782-2022 Plastics－Reinforced moulding compounds and prepregs－Determination of apparent volatile－matter content
KS M ISO 3251:2011 Paints, varnishes and plastics－Determination of non-volatile-matter content
KS M ISO 3001-2002(2017) Plastics－Epoxy compounds－Determination of epoxy
KS F 2244-1990(2001) MEASURING METHOD FOR FIBER CONTENT OF GLASS FIBER REINFORCED PLASTICS
KS M ISO 308-2020 Plastics－Phenolic moulding materials－Determination of acetone-soluble matter(apparent resin content of material in the unmoulded state)
KS M ISO 308-2010(2020) Plastics－Phenolic moulding materials－Determination of acetone-soluble matter(apparent resin content of material in the unmoulded state)
KS C IEC 62321-2021 Electrotechnical products－Determination of levels of six regulated substances(lead, mercury, cadmium, hexavalent chromium,polybrominated biphenyls, polybrominated diphenyl ethers)
KS M ISO 3251-2011(2016) Paints, varnishes and plastics－Determination of non-volatile-matter content
KS M ISO 8618-2002(2007) Plastics－Liquid phenolic resins－Conventional determination of non－volatile matter
KS D ISO 11427:2006 Determination of silver in silver jewellery alloys－Volumetric (potentiometric) method using potassium bromide
KS E ISO 5416:2011 Direct reduced iron－Determination of metallic iron－Bromine-methanol titrimetric method
KS C IEC 62321-2009(2019) Electrotechnical products－Determination of levels of six regulated substances(lead, mercury, cadmium, hexavalent chromium,polybrominated biphenyls, polybrominated diphenyl ethers)

KR-KS

KS M ISO 3251-2021 Paints, varnishes and plastics —Determination of non-volatile-matter content

FI-SFS

SFS-ISO 585 E:1986 This standard is approved in English
SFS-ISO 1875 E:1986 This standard is approved in English
SFS-ISO 3451/1 E:1986 Plastics. Determination of ash. Part 1: General method

DIN

DIN EN ISO 15512:2004 Plastics - Determination of water content (ISO 15512:1999)
DIN EN ISO 14896:2002 Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2000)
DIN EN ISO 7510:2024 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017); German version EN ISO 7510:2024

American National Standards Institute （ANSI)

ANSI/ASTM D6506:2000 Test Method for Assay of Normal-Propyl Bromide Content
ANSI/ASTM D6226:1998 Test Method for Open Cell Content of Rigid Cellular Plastics

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.3.35-2004 Halide Content, Quantitative (Chloride& Bromide) Revision C

BE-NBN

NBN T 04-289-1985 Liquefied phenol for industrial use- Determination of phenols content-Bromination method
NBN EN 637-1994 Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method
NBN-EN 31427-1994 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:1993)

PT-IPQ

NP EN 12118-2002 Plastics piping systems Determination of moisture content in thermoplastics by coulometry

TR-TSE

TS 1955-1975 LIQUEFIED PHENOL FOR INDUSTRIAL USE — DETERMINATION OF PHENOLS CONTENT — BROMINATION METHOD

AR-IRAM

IRAM 13 309-1962 plastic. Determination method for determining the content of free ammonia and ammonia-containing compounds in phenolic plastic molds
IRAM 13 307-1962 Method for determination of methanol-insoluble material content in plastics

YU-JUS

JUS G.S1.755-1991 Plastics.Phenolic resins.Determination of residual phenol contect by iodometric method
JUS G.S1.814-1991 Plastics.Epoxide resins and related materials. Determination of easily saponifiable chlorine
JUS G.S1.506-1988 Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine

GOST

GOST 34801-2021 Drinking water. Determination of bromate ions content by ion chromatography
GOST R ISO 16620-3-2022 Plastics. Biobased content. Part 3. Determination of biobased synthetic polymer content

ZA-SANS

SANS 3251:2007 Paints, varnishes and plastics - Determination of non-volatile-matter content
SANS 11427:1993 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide

GM Global

GMW 14335-2011 Determining the Moisture Content of Plastic Components and Molding Compounds Issue 2; English

European Committee for Electrotechnical Standardization（CENELEC）

EN 62321:2009 Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)

GM Europe

GME QK 000741-1983 Phenoplast mit F黮lstoffen, asbestfrei Phenoplast with Fillers, Free of Asbestos German
GME QK 000745-1988 Phenoplast mit mineralischen F黮lstoffen Phenoplast with Mineral Filler
GME QK 000742-1983 Phenoplast mit F黮lstoffen, asbestfrei Phenoplast with Fillers, Free of Asbestos German