suburban catalyst
suburban catalyst, Total:439 items.
The international standard classification for "suburban catalyst" includes: Other products of the chemical industry , Wastes in general , Surface active agents , Other organic chemicals , Products of the chemical industry in general , Other non-ferrous metals and their alloys , food products in general , Thermoplastic materials , Other equipment for the chemical industry , Medicaments .
The Chinese standard classification for "suburban catalyst" includes: Basic standards and general methods for catalyst , Standardization and quality management , Catalyst , Chemical additive , Rare metals and their alloys , Foods fermentation and brewing in general , Petroleum products in general , Precious metals and their alloys , Basic standards and general methods for chemical additive , Hygiene, safety and labor protection .
Military Standard of the People's Republic of China-General Armament Department
- GJB 1960-1994 Catalyst-814 and Catalyst-816 Specifications
- GJB 1960A-2019 Catalyst-814 and Catalyst-816 Specifications
- GJB 7402-2011 Specification for high loading iridium catalyst of aircraft
- GJB 9874-2020 Specification for gel propellant decomposition catalysts
国家能源局
- SH/T 0964-2017 Determination of catalytic cracking catalyst wear index straight tube method
- SH/T 0960-2017 Sampling method for catalytic cracking catalysts, auxiliaries and adsorbents
- SH/T 0954-2017 Determination of apparent bulk density of catalytic cracking catalysts
- SH/T 0952-2017 Determination method of microreactivity index of catalytic cracking catalyst
- SH/T 0961-2017 Determination of alumina content in catalytic cracking catalyst EDTA volumetric method
- SH/T 0950-2017 Determination of lanthanum oxide and cerium oxide content in catalytic cracking catalysts by X-ray fluorescence spectrometry
- SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst carriers by mechanical tapping
- SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts Static nitrogen adsorption capacity method
- SH/T 0953-2017 Determination of loss on ignition of catalytic cracking catalyst
- SH/T 0962-2017 Determination of sodium oxide content in catalytic cracking catalysts by flame photometry
- SH/T 0955-2017 Water droplet method for determination of pore volume of catalytic cracking catalysts
- SH/T 0963-2017 Determination of iron oxide content in catalytic cracking catalyst - phenanthroline spectrophotometry
- SH/T 0951-2017 Determination of particle size distribution of catalytic cracking catalysts by laser scattering method
工业和信息化部
- HG/T 5036-2016 Test method of catalytic performance for organic sulfur conversion absorption catalysts at room temperature
- HG/T 5027-2016 Test method of catalytic performance for butyraldehyde vapor phase hydrogenation of butanol catalyst
- HG/T 5525-2019 Al-Ni alloy hydrogenation catalyst
- HG/T 5205-2017 Nickel series gas phase benzene hydrogenation catalysts
- HG/T 5767-2020 Catalysts for cobalt and molybdenum sulfide
- HG/T 5035-2016 Test method of catalytic performance in the catalyst for nitrobenzene hydrogenation to aniline
- HG/T 5760-2020 Dimethyl ether carbonylation catalyst for methyl acetate synthesis
- HG/T 5761-2020 Catalytic performance test methods of dimethyI ether carbonylation catalyst for methyl acetate synthesis
- HG/T 5038-2016 Analytical method of chemical composition for Raney nickel catalyst
- HG/T 5313-2018 Special catalysts for FCC MIP process for promoting isoparaffin and propylene
- HG/T 5526-2019 Aluminum-nickel alloy hydrogenation catalyst activity test method
- HG/T 5580-2019 Analytical method of chemical composition in polyoxyethylene catalyst
- HG/T 5596-2019 Sulfur-tolerant carbon monoxide shift catalysts in medium-high pressure
- HG/T 5030-2016 Analytical method of chemical composition for cobalt molybdenum curing uses catalyst
- HG/T 5314-2018 Rare earth containing catalytic cracking additive for heavy oil with high distillate yields
- HG/T 5315-2018 Alkylation catalyst used for purification process
- HG/T 5581-2019 Test method of activity for polyethylene oxide catalysts
- HG/T 5768-2020 Catalyst for coating production-Dibutyltin oxide
- HG/T 5584-2019 Terephthalic acid hydrotreating catalysts
- HG/T 2779-2016 Sulfur-tolerant carbon monoxide shift catalysts
- HG/T 5588-2019 Test method for cobalt in waste petrochemical catalysts
- HG/T 5704-2021 Test method for nickel in waste catalysts
- HG/T 5029-2016 Test method of activity for cobalt molybdenum curing uses catalyst
- HG/T 5529-2019 Methanol hydrogen production catalysts
- HG/T 5765-2020 Determination method of metallic elements in catalytic cracking catalysts
- HG/T 5770-2020 Ammonia decomposition hydrogen production catalysts
- HG/T 5204-2017 Butyraldehyde vapor phase hydrogenation system butanol catalysts
- HG/T 6055-2022 Ruthenium-based catalyst for ammonia synthesis
- HG/T 5955-2021 Petrochemical waste catalyst-Molybdenum determination method
- HG/T 5195-2017 Test method for catalytic performance of octenal gas phase hydrogenation to 2-ethylhexanol catalyst
- HG/T 5194-2017 Alkylation catalyst activity test method
- HG/T 5416-2018 Prereduced ammonia synthesis catalyst
- HG/T 5405-2018 Test method of catalytic performance for ethylene polymerization catalyst
Group Standards of the People's Republic of China
- T/CNIA 0054-2020 Rhodium Carbon Catalyst
- T/CRRA 0703-2018 Sampling method of solid spent petrochemical catalysts
- T/HEBQIA 055-2022 Catalyst micro-reactor evaluation device
- T/SACE 015-2020 Blister Copper Made from Waste Catalyst
- T/CRRA 0704-2018 Specification for packaging of solid spent petrochemical catalysts
- T/CBMF 70-2019 Visible light photocatalytic antibacterial agent
- T/CSTM 00525-2022 Selective hydrodesulfurization catalyst for fluid catalytic cracking gasoline
- T/SDHCIA 032-2022 Regenerated FCC Equilibrium Catalyst
- T/SDHCIA 035-2023 Sodium tungstate made from waste catalyst
- T/CSTM 01264-2024 The determination method for acid accessibility index of catalytic cracking catalyst
- T/SDHCIA 034-2022 Regenerated tungsten-molybdenum-based hydrogenation catalyst
- T/ZAEPI 026-2024 Deactivated selective catalytic reduction catalyst regeneration powder
- T/JSSES 27-2023 Wasted denitrification catalyst regeneration powder
- T/CNIA 0050-2020 Alumina Supported Ruthenium Catalyst
- T/CNIA 0019-2019 Resin catalyst for disproportionation reaction of chlorosilane
- T/CSTM 00552-2022 Kaolin clay for cracking catalyst
- T/CNIA 0051-2020 Alumina Supported Palladium Catalyst
- T/CNIA 0057-2020 Calcium Carbonate Supported Palladium Catalyst
- T/GDBX 060-2022 Platinum-carbon catalyst
- T/CRRA 1904-2024 Regeneration powder of the waste SCR denitration catalyst
- T/SDHCIA 033-2022 Regenerated Copper Raw Materials Made from Waste Catalysts
- T/ZZB 0389-2018 Plate-type DeNOx catalysts
- T/QGCML 1911-2023 Silica-aluminum powder for making ceramics from waste catalyst
- T/SACE 018-2020 High-alumina china clay made from waste catalyst
- T/CIET 552-2024 Technical requirements for low-temperature denitrification catalyst
- T/CSTM 00320-2020 Tail-end hydrogenation catalyst for C2 fraction
- T/CSTM 00064-2019 Catalyst for oxidation of propylene to acrolein
- T/CIEP 0012-2024 Determination of carbon content of catalysts in catalytic cracking and catalytic reforming units - Elemental analyzer method
- T/SICCA 003-2018 Indoor air-purification photocatalyst
- T/CSTM 00065-2019 Catalyst for oxidation of acrolein to acrylic acid
- T/CIESC 0018-2021 FCC regenerated equilibrium catalyst
- T/CNIA 0052-2020 Ruthenium zinc catalyst
- T/ZHLSSH 005-2024 Self-fitting nano catalytic wastewater treatment agent
- T/ZZB 0388-2018 Honeycomb-type DeNOx catalysts
- T/QGCML 4200-2024 Evaluation of denitration catalyst regeneration methods
- T/CNIA 0058-2020 Carbon supported palladium hydroxide catalyst
- T/CICEIA /CAMS26-2021 Diesel engine — Cu-zeolite SCR catalyst for NOx emission control
- T/SDCA 40-2022 Catalyst formulation for suspension bed hydrogenation
- T/CSTM 00526-2022 Hydroisomerization and hydrodesulfurization catalyst for fluid catalytic cracking gasoline
- T/QGCML 1910-2023 Low magnetic agent and resurrection catalyst
- T/JSSES 11-2020 Group standard for ex-situ regeneration of alumina base catalyst
- T/CRRA 0709-2023 Collection, packaging and sampling of catalytic combustion spent catalysts
- T/CSTM 00319-2020 Front-end hydrogenation catalyst for C2 fraction
- T/CNIA 0056-2020 Barium Sulfate Supported Palladium Catalyst
- T/CRRA 0708-2023 Collection, packaging and sampling of spent catalysts for adsorption desulfurization of catalytic gasoline (S Zorb)
- T/CSTM 01240-2024 Prehydrogenation catalyst for catalytic cracking gasoline
- T/SACE 016-2020 Nickel Alloys Made from Spent Catalysts
- T/SACE 017-2020 Zinc Oxide from Spent Catalyst
- T/GDBX 059-2022 Palladium-carbon catalyst
- T/CRRA 0705-2018 Specification for the collection of solid spent petrochemical catalysts
- T/CNIA 0053-2020 Platinum carbon catalyst
- T/NAIA 024-2021 Thermal power plants can be back mixed with denitrification catalysts
Professional Standard - Chemical Industry
- HG/T 3554-2005 Analytical method of chemical composition in ammonia synthesis catalyst
- HG/T 4227-2011 isobutylene etherification resin catalyst
- HG/T 2271-2007 The platinum catalyst Oxidizing ammonia into nitric acid
- HG/T 3545-1990 Determination of ammonia aynthesis catalyst
- HG/T 3556-2012 Low Temperature Carbon Monoxide Shift Catalysts
- HG/T 2976-1983 Fertilizer Catalyst Wear Rate Determination
- HG/T 4107-2016 Methanol synthesis catalysts
- HG/T 2779-1996 Carbon Monoxide Sulfur Tolerant Shift Catalyst
- HG/T 5029~5030-2016 Analytical method of chemical composition for cobalt molybdenum curing uses catalyst
- HG/T 3554-2013 Analytical Method of Chemical Composition in Ammonia Synthesis Catalyst
- HG/T 5408~5411-2018 Analytical method for chemical composition of ruthenium carbon catalyst for hydrogenation of pyridine to piperidine, analytical method for chemical composition of inorganic sulfur catalyst in deliquefied gas, analytical method for chemical composition of
- HG/T 6227-2023 Analysis method of chemical composition of catalytic cracking catalyst X-ray fluorescence spectrometry
- HG/T 3555-2006 Analytical method of chemical components in light oil reforming catalyst
- HG/T 2086-2004 The catalyst oxidizing sulphuric dioxide into sulphuric acid
- HG/T 2271-2014 The platinum catalyst Oxidizing ammonia into nitric acid
- HG/T 3555-2016 Analytical method of chemical components in light oil reforming catalyst
- HG/T 6225-2023 Chromium-based ethylene polymerization catalyst
- HG 2088-1991 S107, S108 vanadium catalysts for sulfuric acid production
- HG/T 3545-2006 Test method of actavity for ammonia synthesis catalyst
- HG/T 6139-2023 Regenerated antimony pentachloride catalyst
- HG/T 2514-1993 Test method for organosulfur hydrogenation catalyst
- HG/T 2511-2013 Analytical Method of Chemical Composition in Methanation Catalyst
- HG/T 2273.2-2004 The natural gas catalyst for secondary reforming
- HG/T 2505-2004 Organic sulphur hydrogenation catalyst
- HG/T 3542-1986 Analytical Method for Trace Sulfur in Fertilizer Catalysts
- HG/T 2782-2024 Determination of crushing resistance of chemical catalyst particles
- HG/T 4556-2013 The catalyst for cyclohexanol dehydrogenation
- HG 2086-2004 The catalyst oxidizing sulphuric dioxide into sulphuric acid
- HG/T 2273.1-2004 The natural gas catalyst for primary reforming
- HG 2509-1993 methanation catalyst
- HG/T 5405~5407-2018 Test methods for catalytic performance of ethylene polymerization catalysts, test methods for sulfur capacity of inorganic sulfur catalysts in deliquefied gas, and test methods for activity of sweetening catalysts at room temperature (2018)
- HG/T 5313~5314-2018 Special Catalyst for Catalytic Cracking to Increase Production of Isoparaffins and Propylene Production and Rare Earth Containing High Liquid Yield Heavy Oil Catalytic Cracking Cocatalyst (2018)
- HG/T 2509-2012 Methanation Catalysts
- HG/T 2559-2011 Classification type and nomenclature for fertilizer catalyst products
- HG/T 3543-2014 Analytical method of chemical composition in natural gas reforming catalyst
- HG/T 2510-2014 Test method of activity for methanation catalyst
- HG/T 5038~5040-2016 Analytical method of chemical compositionin pre-reduced ammonia synthesis catalysts
- HG/T 4680-2014 Test method for single pellet crush strength of fertilizer catalysts
- HG/T 4557-2013 The Catalyst for Nitrobenzene Hydrogenation to Aniline
- HG 3556-2004 Low temperature carbon monoxide shift catalyst
- HG/T 3555-1984 Analytical method of chemical components in light oil reforming catalyst
- HG/T 6282-2024 Determination of Carbon Monoxide Index of Catalytic Cracking Catalyst
- HG/T 2782-2011 Test method for single pellet crush strength of fertilizer catalysts
- HG/T 4349-2012 Carbonyl sulfide hydrolyzed catalysts at room temperature
- HG/T 5584~5587-2019 Terephthalic acid hydrorefining catalyst, activity test method of ruthenium-based ammonia synthesis catalyst, chemical composition analysis method of supported ammonia synthesis catalyst, and chemical composition analysis method of catalyst for hydrogenat
- HG/T 5764~5767-2020 Determination of pore structure of petroleum refining catalysts, determination of metal elements in catalytic cracking catalysts, test methods for catalyst activity of supported rosin disproportionation and catalysts for cobalt and molybdenum sulfide (202
- HG/T 2511-2005 Analytical method of chemical composition in Methanation catalyst
- HG/T 4348-2012 est method of naphtha steam reforming catalysts
- HG/T 3554-1981 Analytical Method for Chemical Components of Ammonia Synthesis Catalyst
- HG/T 4387-2012 Butylene Hydration Resistance High-temperature Resin Catalyst
- HG/T 5035~5037-2016 Catalytic Performance Test of Nitrobenzene Hydrogenation to Aniline Catalyst and Normal Temperature Organic Sulfur Conversion and Absorption Catalyst and Activity Test Method of Methanol Hydrogen Production Catalyst (2016)
- HG/T 2976-2011 Test method for attrition and abrasion of fertilizer catalysts
- HG/T 3543-2006 Analytical method of chemical composition in natural gas reforming catalyst
- HG/T 5756~5758-2020 Analytical methods for chemical composition of catalysts for selective hydrogenation of benzene to cyclohexene, analytical methods for chemical composition of aluminum-based hydrogenation catalysts, and determination of reduction degree of catalysts for a
- HG/T 4853-2015 Cesium catalyst of sulfuric acid production use
- HG/T 4107-2009 Methanol synthesis catalysts
- HG 3546-2002 High temperature carbon monoxide shift catalysts
- HG/T 3545-2014 Test method of activity for ammonia synthesis catalyst
- HG/T 4347-2012 Naphtha steam reforming catalysts
- HG 2505-1993 Organic Sulfur Hydrogenation Catalyst
- HG/T 2780-1996 Test method for carbon monoxide sulfur tolerant shift catalysts
- HG/T 2510-1993 Methanation Catalyst Test Method
- HG/T 2273.1~2273.3-2013 Natural gas conversion catalyst, thermal protection agent (2013)
- HG 2507-1993 S109 Type Vanadium Catalyst for Sulfuric Acid Production
- HG/T 2273.1-2013 The Natural Gas Catalyst for Primary Reforming
- HG 2505-2004 Organic sulphur hydrogenation catalyst
- HG/T 5204~5205-2017 Butyraldehyde vapor phase hydrogenation system butanol catalysts
- HG 2086-1991 S101 type vanadium catalyst for sulfuric acid production
- HG/T 3543-1988 Analytical method of chemical composition for natural gas reforming catalysts
- HG/T 2782-1996 Determination of resistance to crushing of fertilizer catalyst particles
- HG/T 2505-2012 Organic Sulphur Hydrogenation Catalysts
- HG 2271.1-1992 Platinum catalyst for S201 nitric acid production
- HG 2559-1994 Fertilizer catalyst product classification model and name
- HG/T 4863-2015 High palladium catalyst for ammonia oxidation in nitric acid production
- HG/T 4860-2015 Methanol to light olefins catalysts
- HG/T 2510-2006 Test method of activity for methanation catalyst
- HG/T 4555-2013 Analytical Method of Micro-chlorine in Fertilizer Catalyst
- HG/T 3546-2011 High temperature carbon monoxide shift catalysts
- HG/T 2509-2004 Methanation catalyst
- HG/T 3544-1989 The determinatino of high temperature carbon monoxide shift catalyst
- HG/T 4617-2014 Ester resin catalyst
- HG/T 5579~5583-2019 Test methods for activity of terephthalic acid hydrotreating catalysts, chemical composition analysis methods and activity test methods for polyethylene oxide catalysts, test methods for activity test methods for n-olefin to isobutylene catalysts in lique
- HG/T 5189~5193-2017 Analytical method of chemical composition for organic sulfur conversion absorption catalysts at room temperature
- HG/T 2273.2-2013 The Natural Gas Catalyst for Secondary Reforming
- HG/T 3550-2004 Ammonia synthesis catalyst
- HG/T 3542-2005 Analytical method of micro - Sulphur in fertilizer catalyst
- HG/T 3550-2013 Ammonia Synthesis Catalyst
- HG/T 2511-1993 Analytical method for chemical composition of methanation catalyst
- HG/T 4675-2014 Precipitated iron catalyst for Fischer-Tropsch synthesis
- HG/T 5759~5762-2020 Normal temperature iron oxide desulfurizer, dimethyl ether carbonylation to methyl acetate catalyst, dimethyl ether carbonylation to methyl acetate catalyst catalytic performance test method and chromium-based ethylene polymerization catalyst chemical com
- HG/T 3542-2013 Analytical Method of Micro - Sulphur in Fertilizer Catalyst
- HG/T 2976-1999 Determination for attrition and abrasion of fertilizer catalyst
- HG/T 2086-2013 The Catalyst Oxidizing Sulphuric Dioxide Into Sulphuric Acid
- HG/T 6283-2024 Catalytic cracking of light olefins promoter
Jilin Provincial Standard of the People's Republic of China
- DB22/T 2660-2017 Test of Catalytic Activity of PDS Desulfurization Catalyst
- DB22/T 3071-2019 Explosive Catalyst Detection and Sampling Procedures
Hebei Provincial Standard of the People's Republic of China
- DB13/T 5528-2022 Technical specification for catalytic coal gasification without recovery catalyst
- DB13/T 5511-2022 Coal Catalytic Gasification Catalyst Recovery Process Technical Regulations
未注明发布机构
- ASTM RR-D32-1011 1984 D4438-Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
- ASTM RR-D32-1017 1986 D4164-Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
- ASTM RR-D32-1039 2002 D6761-Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM RR-D32-1018 1986 D4180-Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM RR-D32-1042 2014 D7964-Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
- ASTM RR-D32-1022 1987 D4699-Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
- ASTM RR-D32-1005 1985 D4512-Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- DIN 16945 Testing of resins, hardeners and accelerators, and catalyzed resins
- ASTM RR-D32-1040 2004 D7084-Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- DIN 16945:1976 Testing of resins, hardeners and accelerators, and catalyzed resins
- ASTM RR-D32-1016 1985 D3907-Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM RR-D32-1024 1988 D4179-Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM RR-D32-1003 1982 D4058-Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
Professional Standard - Energy
- NB/SH/T 6075-2023 Dynamic Image Method for Determination of Catalyst Morphology in Catalytic Cracking
- NB/SH/T 0863-2013 Guideline for Determination of Chemical Element in Fluid Catalytic Cracking Accelerant with X-ray Fluorescence Spectrometric Methods
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 5816-1995 and adsorbents-Determination of surface area
- GB/T 18881-2009 GB/T 18881-2009
- GB/T 29914-2013 Oxidation Catalyst for Diesel Vehicle Exhaust Purification
- GB/T 31584-2015(英文版) Plate type DeNO x catalysts
- GB/T 18881-2002 Catalyst for petrol vehicle exhaust purification
- GB/T 31584-2015 Plate-type DeNOx catalysts
- GB/T 20370-2006 Biocatalyst Guideline for enzyme preparation nomenclature
- GB/T 31587-2015(英文版) Honeycomb type DeNO x catalysts
- GB/T 27870-2011 Photocatalyst for air purification
- GB/T 31587-2015 Honeycomb-type DeNOx catalysts
- GB/T 23592-2009 Catalyst for motorcycle exhaust purification
- GB/T 23277-2009 Chemical analysis methods of catalysts containing precious metals - Determination of platinum palladium and rhodium in automobile exhaust-purifying catalysts - Spectrophotometry
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 39718-2020 High mass flux catalyst for hydrogen peroxide decomposition
- GB/T 41499-2022 Waste catalyzer—Classification
- GB/T 37352-2019 Marine selective catalytic reduction(SCR)cellular-type denitrification catalysts
- GB/T 38602-2020 Test method of catalytic activity for catalytic wet oxidation of organic wastewater
- GB/T 37360-2019 Test method of activity for rhodium carbon catalysts
- GB/T 37359-2019 Test method of activity for palladium carbon catalysts
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
- GB/T 35960-2018 Catalysts titanium oxide type for sulfur recovery
- GB/T 23592-2017 Catalysts for motorcycle exhaust purification
- GB/T 34496-2017 Catalyst for heavy-duty gas engine vehicle exhaust purification
- GB/T 34700-2017 Rare earth type selective catalytic reduction (SCR) denitration catalysts
- GB/T 18881-2017 Catalyst for light-duty petrol vehicle exhaust purification
- GB/T 34703-2017 Test method of catalytic activity for platinum-carbon catalysts
Professional Standard - Petrochemical Industry
- SH/T 0666-1998 Petroleum Refining Catalyst Classification
- SH/T 0341-1992 Determination method for aluminum oxide content in catalyst carrier
- SH/T 0570-1993 Determination method for platinum content in reforming catalyst
Professional Standard - Rare Earth
- XB/T 505-2003 Substrate of catalyst for petrol vehicle emission purification
- XB/T 503-1993 Gasoline vehicle exhaust purification spherical rare earth catalyst
- XB/T 506-2007 Oxidation catalyst for diesel vehicle exhaust purification
- XB/T 505-2011 Substrate of catalyst for gasoline vehicle emission purification
Anhui Provincial Standard of the People's Republic of China
- DB34/T 1442-2011 FD hydrodesulfurization catalyst
Shandong Provincial Standard of the People's Republic of China
- DB37/T 2603-2014 Technical Requirements for Selective Catalytic Reduction (SCR) Denitrification Catalysts in Shandong Province
Professional Standard - Machinery
- JB/T 11880.9-2016 Diesel engines.Selective catalytic reduction (SCR) systems.Part 9: Catalysts
Professional Standard - Agriculture
- GB 3636-1983 Determination of abrasion for fertilizer catalyst, molecular sieve and absorbent
- ZB G 75003-1986 Analytical method for loss on ignition of fertilizer catalyst
Professional Standard - Non-ferrous Metal
- YS/T 210-1994 Pelleted catalyst of platinum for diesel engine exhaust gases purification
- YS/T 1662-2023 Specification for packaging of precious metals waste catalyst
- YS/T 210-2009 Pelleted catalyst of platinum for diesel engine exhaust gases purification
Professional Standard - Coal
- MT 869-2000 Carbon monoxide oxidative for filter self-rescuers
Professional Standard - Electricity
- DL/T 1828-2018 Regenerated DeNOx catalysts for Thermal Power Plant
PL-PKN
- PN C83030-1971 Accelerators for vulcanization Accelerator D
HU-MSZT
- MSZ 3652-1979 catalyst
- MNOSZ 19812-1953 Methyl formate nickel catalyst
GSO
- NB/SH/T 0960-2017 Sampling method for catalytic cracking catalysts, promoters and adsorbents
- NB/SH/T 0955-2017 Determination of pore volume of catalytic cracking catalysts - Water drop method
- NB/SH/T 0954-2017 Determination of apparent bulk density of catalytic cracking catalyst
- NB/SH/T 0953-2017 Determination of ignition loss of catalytic cracking catalyst
- NB/SH/T 0952-2017 Determination of the micro-reaction index of catalytic cracking catalyst
- NB/SH/T 0964-2017 Determination of the attrition index of catalytic cracking catalysts - Straight tube method
- NB/SH/T 0961-2017 Determination of alumina content in catalytic cracking catalysts - EDTA volumetric method
- NB/SH/T 0951-2017 Determination of particle size distribution of catalytic cracking catalysts - Laser scattering method
- NB/SH/T 0962-2017 Determination of sodium oxide content in catalytic cracking catalysts - Flame photometry
- NB/SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst supports by mechanical tapping
- NB/SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts - Static nitrogen adsorption capacity method
- NB/SH/T 0963-2017 Determination of iron oxide content in catalytic cracking catalysts - O-phenanthroline spectrophotometric method
- NB/SH/T 6068-2022 Balance agent for start-up and replenishment of catalytic cracking unit
- NB/SH/T 0950-2017 Determination of lanthanum oxide and cerium oxide content in catalytic cracking catalysts - X-ray fluorescence spectrometry
SCC
- AWWA JAW3136 Journal AWWA — Suburban Customer ... Water Rates, Village of Niles v. City of Chicago, Appellate Court of Illinois, Feb. 28, 1980. (AWW/01/0.-$4)
- AWWA JTMGT61337 Regional Water Supply Planning in a Rapidly Growing Suburban Area
- HOLDEN HN 2009-2013 Sealant - Two Part Silicone - Catalyst
- HOLDEN HN 2009-1997 Sealant - Two Part Silicone - Catalyst
- HOLDEN HN 1958-2009 SEALANT – TWO PART SILICONE - CATALYST
- MIL MIL-C-943A-1953 CATALYST, SCREEN (NO S/S DOCUMENT)
- SPC GB/T 37360-2019 Test method of activity for rhodium carbon catalysts (TEXT OF DOCUMENT IS IN CHINESE)
- MIL MIL-C-82822-1989 CATALYST, BURNRATE (NO S/S DOCUMENT)
- SPC GB/T 37352-2019 Marine selective catalytic reduction (SCR) cellular-type denitrification catalysts (TEXT OF DOCUMENT IS IN CHINESE)
- AWWA JAW3869 Journal AWWA — Water Supply in the Paris Suburbs: Changing Treatment for Changing Demands
- AWWA JAW64485 Journal AWWA — Beyond the Tap: City Water Service as a Catalyst for Regional Economic Development
- SPC GB/T 37458-2019 Guidelines for traffic safety evaluation of suburban arterial roads (TEXT OF DOCUMENT IS IN CHINESE)
- AWWA JAW31584 Journal AWWA — Washington Suburban Sanitary Commission Implements GIS
GM North America
- GM 9986017-1993 Bismuth Catalyst
- GM 9986018-1993 Tertiary Amine Catalyst
- GM 9986015-1993 Dibutyl Tin Dilaurate Catalyst
- GM 9986016-1993 Dimethyl Tin Dilaurate Catalyst
- GM 9986019-1993 SRIM, Organotin Catalyst
General Motors Corporation (GM)
- GM 9982231-1996 Adhesive, Promoter
- GM 9982249-2002 Adhesive Promoter
- GM 9981810-1993 Adhesive, Promoter, RTV to Chrome Revision A
- GM 9984457-1992 Catalyst, EOLR for Basecoats
- GM 9985988-1994 Adhesive, Prepromoter, (Laquer Thinner)
- GM 9985983-1994 Adhesive, Two-Part, Silicone, Catalyst
- GM 9984810-1998 Primer (Adhesion Promoter) - Solventborne for TPO Revision D [Replaced: GMNA 9984084]
- GM 9984818-2002 Stand Alone Adhesion Promoter for TPO Revision A
- GM 9984808-1998 Primer (Adhesion Promoter) - Waterborne for TPO Revision B
American Society for Testing and Materials (ASTM)
- ASTM D3766-86(2007) Standard Terminology Relating to Catalysts and Catalysis
- ASTM D3766-86(2002) Standard Terminology Relating to Catalysts and Catalysis
- ASTM D3663-03 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM D3663-20 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM D3663-03(2015) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- ASTM UOP333-07 Fines in Catalysts and Catalyst Supports by Sieve Analysis
- ASTM D3766-08 Standard Terminology Relating to Catalysts and Catalysis
- ASTM D8353-20 Standard Guide for Determination of Individual Particle Strength of Low Surface Area Catalysts and Catalyst Carriers by Drop Test onto a Steel Plate
- ASTM D3766-24a Standard Terminology Relating to Catalysts and Catalysis
- ASTM D3766-86(1997) Standard Terminology Relating to Catalysts and Catalysis
- ASTM D3766-08(2013) Standard Terminology Relating to Catalysts and Catalysis
- ASTM UOP333-10 Fines in Catalysts and Catalyst Supports by Sieve Analysis
- ASTM D6761-22a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D4058-96(2015) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
- ASTM D6761-02 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D6761-22 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM UOP896-93 Platinum in Spent Catalyst
- ASTM D4365-95(2001) Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
- ASTM D6761-17 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D3766-08(2018) Standard Terminology Relating to Catalysts and Catalysis
- ASTM D4365-95 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
- ASTM D6761-07(2012) Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D4365-95(2007)e1 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
- ASTM D4058-96(2020) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
- ASTM UOP954-03 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
- ASTM D7084-23 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM D7206/D7206M-19 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
- ASTM D6761-07 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D5153-91(1997) Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
- ASTM UOP602-12 Soxhlet Extraction of Catalyst
- ASTM D7206/D7206M-06(2013)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
- ASTM D4179-22 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM D6761-04 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D7084-18 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM UOP954-11 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
- ASTM D4179-11 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM D7084-04 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM D7206/D7206M-06(2012)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
- ASTM D6175-03(2013) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM UOP602-89 Soxhlet Extraction of Catalyst
- ASTM UOP410-14 Sodium in Catalysts by AAS
- ASTM UOP254-14 Apparent Bulk Density of Fluid Cracking Catalyst
- ASTM D4164-03 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
- ASTM D6175-03(2008) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM D7084-04(2009) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM UOP815-87 Acid Insolubles in Catalysts
- ASTM D7084-04(2017) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
- ASTM D6761-04a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- ASTM D4180-03(2008) Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM D4180-03 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM D4180-13 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM D4164-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
- ASTM D4179-11(2017) Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM D7964/D7964M-14 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
- ASTM D8393-21 Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water Adsorption
- ASTM D6175-03(2019) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM D6175-03 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM UOP629-90 Analysis of Hydrogen Fluoride Alkylation Catalysts and Regenerator Bottoms
- ASTM D4164-13 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
- ASTM UOP878-87 Potassium in Catalysts by Atomic Absorption
- ASTM D4164-13(2018) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
- ASTM D3907/D3907M-19 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM D4699-03(2018) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM D4699-03(2018)e1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM D4781-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM D4781-03(2013) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM UOP254-87 Apparent Bulk Density of Fluid Cracking Catalyst
- ASTM UOP894-91 Mercury in Catalysts by GF-AAS
- ASTM UOP879-87 Aluminum in Catalysts by Atomic Absorption
- ASTM D4438-13(2018)e1 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
- ASTM UOP715-85 Rhenium Catalysts by Spectrophotometry
- ASTM D4699-03(2013) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM D4699-03 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
- ASTM D3907-03(2008) Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM D4438-24 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
- ASTM D7964/D7964M-19 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
- ASTM D3907-03 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM D4641-17 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
- ASTM D4164-99 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
- ASTM UOP303-07 Impurities in Catalysts by ICP-OES
- ASTM UOP778-07 Packed Apparent Bulk Density (ABD) of Extruded Catalyst
- ASTM UOP294-93 Apparent Bulk Density of Catalyst Particles
- ASTM D4284-12 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
- ASTM D4780-12(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
- ASTM UOP602-15 Soxhlet Extraction of Catalyst
- ASTM UOP909-98 Loss on Ignition of Catalyst at 700°C
- ASTM UOP294-14 Apparent Bulk Density of Catalyst Particles
- ASTM D4438-13 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
- ASTM D4780-23 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
- ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM UOP944-96 Surface Area of Fresh and Regenerated Catalyst
- ASTM UOP967-00 Automated Crush Strength of Spherical Catalysts
- ASTM D3907/D3907M-13 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- ASTM D4284-12(2017)e1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
- ASTM D4180-13(2018) Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM UOP412-87 Loss on Ignition of Catalysts at 500°C
- ASTM UOP973-01 Automated Crush Strength of Extruded Catalysts
- ASTM D3908-03 Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method
American National Standards Institute (ANSI)
- ANSI/NFPA 1141-2011 Fire Protection Infrastructure for Land Development in Wildland, Rural, and Suburban Areas
- ANSI/NFPA 1142-2011 Standard on Water Supplies for Suburban and Rural Fire Fighting
- ASTM D4699-23 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM D4180-23 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ANSI/NAPM IT9.16-1993 Imaging Media - Photographic Activity Test
Korean Agency for Technology and Standards (KATS)
- KS L 1622-2006 Glossary of terms used in photocatalysts
- KS L 1622-2006(2021) Glossary of terms used in photocatalysts
- KS L 1622-2022 Glossary of terms used in photocatalysts
- KS L 1622-2006(2016) Glossary of terms used in photocatalysts
Universal Oil Products Company (UOP)
- UOP 333-2010 Fines in Catalysts and Catalyst Supports by Sieve Analysis
- UOP 602-2015 Soxhlet Extraction of Catalyst
- UOP 954-2011 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
- UOP 410-2014 Sodium in Catalysts by AAS
- UOP 254-2014 Apparent Bulk Density of Fluid Cracking Catalyst
- UOP 303-2007 IMPURITIES IN CATALYSTS BY ICP-AES
- UOP 973-2001 AUTOMATED CRUSH STRENGTH OF EXTRUDED CATALYSTS
- UOP 294-2014 Apparent Bulk Density of Catalyst Particles
Institute of Interconnecting and Packaging Electronic Circuits (IPC)
- IPC MI-660 11.3-1984 Palladium Catalyst Analysis
GM Europe
- GME4667-2004 脺berpr眉fung der Haftf盲higkeit von Beschichtungen im Katalysator Test of Coating Adherence in Catalytic Converters English/German; Includes Appendix A
- GME L 000 0953-2003 Ordinary topcoat catalyst (Germany)
- GME8282-2002 Absolutbeurteilung der Haftfestigkeit von Katalysatorbeschichtungen Catalytic Converter - Washcoat Loss Evaluation English/German; Includes Appendix A-C
Institute of Electrical and Electronics Engineers (IEEE)
- The IEEE Global Initiative on Ethics of Extended Reality (XR) Report--Extended Reality (XR) Ethics i The IEEE Global Initiative on Ethics of Extended Reality (XR) Report--Extended Reality (XR) Ethics in Education
AT-ON
- ONORM B 3020 Teil.11-1988 Planed timber profiles; country house boards (profil L)
United States Navy
- NAVY QPL-23586-2011 SEALING COMPOUND (WITH ACCELERATOR), SILICONE RUBBER, ELECTRICAL
- NAVY MIL-C-85493-1981 CATALYST, BURN RATE 2, 2 BIS (ETHYLFERROCENYL) PROPANE
RU-GOST R
- GOST 3193-1974 Platinum alloy catalytic gauzes. Specifications
ITE - Institute of Transportation Engineers
- LP-162-1989 Travel Characteristics at Large-Scale Suburban Activity Centers
- 102-1979 Traffic Measurement Methods for Urban and Suburban Areas
(U.S.) Ford Automotive Standards
- FORD E-MR004-056B-1979 FURAN LIQUID CORE BINDER AND CATALYST
- FORD E-MR004-4017-1982 PHENOLIC LIQUID CORE BINDER AND CATALYST
Indonesia Standards
- SNI 06-4170-1996 Specification of calcium chloride for speeding up concrete hardening
IN-BIS
- IS 8325-1983 Specification for nickel formate for nickel catalysts
- IS 6018-1971 Specification for platinum and platinum-rhodium catalyst wire mesh
German Institute for Standardization
- DIN 16945:1989 Testing of resins, hardeners and accelerators, and catalyzed resins
- DIN 43532:1986 Lead-acid storage batteries; vent plug with catalyst
- DIN 16945:1989-03 Testing of resins, hardeners and accelerators, and catalyzed resins
U.S. Military Regulations and Norms
- ARMY MIL-B-45371 R NOTICE 1-1996 BUSES, MOTOR: SUBURBAN AND INTERCITY, 41 TO 53 ADULT PASSENGER, 4X2, 6X2 AND 6X4, COMMERCIAL
- ARMY MIL-B-45371 R-1990 BUSES, MOTOR: SUBURBAN AND INTERCITY, 41 TO 53 ADULT PASSENGER, 4X2, 6X2 AND 6X4, COMMERCIAL
International Organization for Standardization (ISO)
- ISO/TS 10650:1999 Dental equipment - Powered polymerization activators
API - American Petroleum Institute
- API PUBL 4667-1997 Vehicle Emissions Testing of Rapidly Aged Catalysts
catalyst,molecular catalyst,reaction catalyst,mercury catalyst,Suburban University,Suburban Lab Supplies,suburban catalyst,Catalyst-based catalyst,Suburban Gas Chromatograph Regulations,Suburban Industrial Design,Suburban Accessories Industrial Design,Suburban Instruments Product Design,Suburban Gas Chromatograph Use,Suburban Instrument Calibration Methods,Suburban Instrument Calibration Report,"catalyst,Suburban detection and analysis instrument,Suburban Analytical Instrument Calibration,Suburban Optical Metrology Instruments,Suburban Lab Instruments