Quantitative measurement range

Quantitative measurement range, Total:450 items.

The international standard classification for "Quantitative measurement range" includes: Fruits and derived products , Animal feeding stuffs , Raw materials , Geology. Meteorology. Hydrology , Lubricants, industrial oils and related products , Chemical reagents , Non-destructive testing , Solvents , Chemical analysis of metals , Products of the chemical industry in general , Cement. Gypsum. Lime. Mortar , Photographic paper, films and cartridges , Applications of information technology in general , Other standards related to nuclear energy , Paper and board , Abrasives , Pigments and extenders , Metrology and measurement in general , Dividing and tool-workpiece holding devices , Measuring instruments , Occupational safety. Industrial hygiene , Analytical chemistry , Hydraulic energy engineering .

The Chinese standard classification for "Quantitative measurement range" includes: Livestock and poultry feed and additive , Analysis methods for exhaust emission pollutants , Ceramic and glass in general , Daily use ceramics products , Ionizating Radiation Measurement , Natural resource and environment protection , Lubricating grease , Chemical reagent in general , Basic standards and general methods , Papermaking in general , Basic standards and general methods for dye , Metallographic testing method , Cement , Basic standards and general methods for photosensitive material , Information processing technology in general , Accelerator for agriculture and industry , Grinding material and apparatus , Display recording instrument , Measuring tool and instrument , Measuring devices , Labor sanitation , Measurement in general , Length Measurement , Water conservancy and water power engineering in general .

Group Standards of the People's Republic of China

T/SHZSAQS 00160-2022 Determination of residual amount of methylpiperium in cotton stalks
T/CAIA SH016-2021 Industrial hemp - determination of cannabidiol and cannabinolic acid - high performance liquid chromatography
T/CAIA SH017-2021 Industrial hemp - determination of cannabinol, Δ9-Tetrahydrocannabinol and tetrahydrocannabinolic acid -high performans liquid chromatography
T/CAGIS 10-2023 Quality requirements and evaluation of surveying and mapping products for delimiting river and lake management area
T/CSTM 00873-2022 Industrial hemp - determination of cannabidiol and cannabinolic acid - high performance liquid chromatography
T/SCS 000012-2021 Determination of trace elements in boron carbide–silicon carbide pellets by Inductively coupled plasma optical emission spectrometry

Professional Standard - Non-ferrous Metal

YS/T 3037-2020 Technical specification of acoustic wave test for surrounding rock relaxation range of gold mine

Professional Standard - Agriculture

NY/T 1945-2010 Determination of selenium in feed--Microwave digestion--Atomic fluorescence spectrometry
NY/T 2012-2011 Determination of free phenolic acid in fruits and derived products
NY/T 3678-2020 Real time PCr method for detection of Nosema bombycis
NY/T 2010-2011 Determination of total flavonoids in citrus fruits and derived products
NY/T 2011-2011 Determination of limonin in citrus fruits and derived products
NY/T 2336-2013 Determination of polymethoxylated flavones in citrus and derived products.HPLC
NY/T 2014-2011 Determination of hesperidin and naringin in citrus fruits and derived products

Professional Standard - Environmental Protection

HJ/T 45-1999 Stationary source emission -- Determination of asphaltic smoke -- Gravimetric method
HJ/T 28-1999 Stationary source emission -- Determination of hydrogen cyanide -- Iso-nicotinic-acid-3-methyl-1-phenyl-5-pyrazolone spectrophotometric method

Professional Standard - Light Industry

QB/T 1047-1998 Paper and Paperboard Quantitative Tester
QB/T 1546-1992 Measurement Method for Ceramic Glaze Melting Temperature Range
QB/T 1546-2016 Test method for melting temperature range of ceramic glaze
QB/T 1547-2016 Test method for sintering temperature range of ceramic material
QB/T 1547-1992 Measurement Method for Ceramic Material Temperature Range Burning Method

National Metrological Verification Regulations of the People's Republic of China

JJG 852-1993 Neutron Ambient Dose Equivalent Meter
JJG 852-2006 Verification Regulation of Neutron Ambient Dose Equivalent (Rage) meters
JJG 393-2018 Portable Ambient Dose Equivalent(Rate) Meters and Monitors for X and gamma Radiations

Professional Standard - Ocean

HY/T 238-2018 Extent of protection delimits of marine observation environment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22811-2008 Corrugated fibreboard - Determination of the grammage of the component papers after separation
GB/T 2384-2015 Dyes intermediates―General method for the determination of melting range
GB/T 5402-2003 Raper and board—Determination of air peremeance(medium range)—Gurley method
GB/T 617-1988 Chemical reagent-General method for the determination of melting range
GB/T 34127-2017 Fixed energy high intensity proton cyclotron within the range of 10 MeV～20 MeV
GB/T 2384-2007 Dyes intermediates—General method for the determination of melting range
GB/T 15749-2008 Measuring method in quantitative metallography
GB/T 2403-2006 Cationic dyes - Determination of suitable range of pH of dyeing liquor in acrylic dyeing
GB/T 3498-1983 Lubricating greases;Determination of dropping point(wide temperature range)
GB/T 12960-2019 Quantitative determination of constituents of cement
GB/T 22872-2008 Solid fibreboard—Determination of grammage of single layers
GB/T 22901-2008 Paper and board - Determination of air permeance(medium range) - General method
GB/T 12960-2007 Quantitative determination of constituents of cement
GB/T 617-2006 Chemicalreagent - General method for the determination of melting range
GB/T 2403-2014 Cationic dyes―Determination of suitable range of pH of dyeing liquor in acrylic dyeing
GB/T 40692-2021 Definition and scope for government information system
GB/T 2384-2021 Dyes intermediates—General method for the determination of melting range
GB/T 14321-2022 Determination method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer
GB/T 24328.5-2009 Tissue paper and tissue products—Part 5:Determination of grammage
GB/T 14766-1993 Photography－black－and－white continuous-tone papers--determination of ISO speed and ISO range for printing
GB/T 2679.13-1996 Paper and board-Determination of air permeance (medium range)-Bendtsen method
GB/T 2384-1992 Dye intermediates general method for the determination of melting range
GB 617-1988 General method for determination of melting point range of chemical reagents
GB/T 39242-2020 Non-destructive testing—Ultrasonic testing—Sensitivity and range setting
GB/T 2403-1980 Determination of suitable pH range of the dye both for the dyeing of acrylic fibres with cationic dyes
GB/T 3498-2008 Petrolum products - Determination of dropping point of lubricating greases (wide temperature range)

Liaoning Provincial Standard of the People's Republic of China

DB21/T 4104-2025 Specifications for delineation of river and lake management areas

Professional Standard - Land Management

TD/T 1094-2024 Procedures for determining the scope of townships

Taiwan Provincial Standard of the People's Republic of China

CNS 10268-1983 Method of Test for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
CNS 8835-1996 Methods of Test for Melting Point and Melting Range of Chemical Products

Professional Standard - Petrochemical Industry

SH/T 0661-1998 Standard test method for evaporation loss of lubricating greases over wide-temperature range
SH/T 0165-1992 Petroleum products - Determination of high vacuum distillation within high boiling point

Professional Standard - Machinery

JB/T 10007-1999 Large external micrometer
JB/T 10007-2012 Large ecternal micrometer
JB/T 9266-1999 Temperature measuring range of indicating instruments and recording instruments

Professional Standard - Aviation

HB 3420-1983 Adjustable flat plate type measurement instrument (range of measurement: 200~1000)
HB 3419-1983 Adjustable flat plate type measurement instrument (range of measurement: 75~200)
HB 3422-1983 Adjustable bow type measuring instrument (range of measurement: 50~300)
HB 3423-1983 Adjustable bow type measuring instrument (range of measurement: 300~500)
HB 3421-1983 Adjustable tubular type measuring instrument (range of measurement: 340~1000)

Guangdong Provincial Standard of the People's Republic of China

DB44/T 2398-2022 Technical specification for demarcation of river course management scope

Professional Standard - Electron

SJ/T 10171.9-1991 Measurement methods for performances of separator of alkaline batteries-Determination of air permeability through separator (medium range)-Schopper method

National Health Commission of the People's Republic of China

GBZ/T 300.38-2017 Determination of toxic substances in workplace air—Part 38: Carbon disulfide
GBZ/T 300.133-2017 Determination of toxic substances in workplace air— Part 133: Acetonitrile, acrylonitrile and methylacrylonitrile
GBZ/T 300.19-2017 Determination of toxic substances in workplace air—Part 19: Molybdenum and its compounds
GBZ/T 300.84-2017 Determination of toxic substances in workplace air—Part 84: Methyl alcohol, propyl alcohol and octyl alcohol
GBZ/T 300.31-2017 Determination of toxic substances in workplace air—Part 31: Zinc and its compounds
GBZ/T 300.82-2017 Determination of toxic substances in workplace air—Part 82: Benzyl chloride and p-chlorotoluene
GBZ/T 300.99-2017 Determination of toxic substances in workplace air—Part 99: Formaldehyde, acetaldehyde and butyraldehyde
GBZ/T 300.127-2017 Determination of toxic substances in workplace air―Part 127: Acrylates
GBZ/T 300.140-2017 Determination of toxic substances in workplace air―Part 140: Hydrazine, methyl hydrazine and 1,1-dimethylhydrazine
GBZ/T 300.66-2017 Determination of toxic substances in workplace air—Part 66: Benzene, toluene, xylene and ethyl benzene
GBZ/T 300.7-2017 Determination of toxic substances in workplace air―Part 7: Calcium and its compounds
GBZ/T 300.78-2017 Determination of toxic substances in workplace air—Part 78: Vinyl chloride, dichloroethene,trichloroethene and tetrachloroethene
GBZ/T 300.143-2017 Determination of toxic substances in workplace air—Part 143: p-Nitroaniline
GBZ/T 300.48-2017 Determination of toxic substances in workplace air—Part 48: Ozone and hydrogen peroxide
GBZ/T 300.17-2017 Determination of toxic substances in workplace air—Part 17: Manganese and its compounds
GBZ/T 300.136-2017 Determination of toxic substances in workplace air—Part 136: Trimethylamine, diethylamine and triethylamine
GBZ/T 300.53-2017 Determination of toxic substances in workplace air—Part 53: Selenium and its compounds
GBZ/T 300.43-2017 Determination of toxic substances in workplace air—Part 43: Hydrazoic acid and sodium azide
GBZ/T 300.110-2017 Determination of toxic substances in workplace air―Part 110: Hydroquinone and resorcinol
GBZ/T 300.103-2017 Determination of toxic substances in workplace air―Part 103: Acetone, methyl ethyl ketone and methyl isobutyl ketone
GBZ/T 300.159-2017 Determination of toxic substances in workplace air―Part 159: Nitroglycerine,nitroglycerine, cyclotetramethylene tetranitramine and cyclotrimethylenetrinitramine
GBZ/T 300.85-2017 etermination of toxic substances in workplace air—Part 85: Butyl alcohol,amyl alcohol and allyl alcohol
GBZ/T 300.15-2017 Determination of toxic substances in workplace air—Part 15: Lead and its compounds
GBZ/T 300.3-2017 Determination of toxic substances in workplace air―Part 3: Barium and its compounds
GBZ/T 300.2-2017 Determination of toxic substances in workplace air—Part 2: Antimony and its compounds
GBZ/T 300.122-2017 Determination of toxic substances in workplace air― Part 122: Methyl formate and ethyl formate
GBZ/T 300.59-2017 Determination of toxic substances in workplace air—Part 59: Volatile organic compounds
GBZ/T 300.61-2017 Determination of toxic substances in workplace air—Part 61: Butylene, 1,3-butadiene and dicyclopentadiene

Professional Standard - China Metal Association

CSM 01010101-2006 Specification for Uncertainty Evaluation of Titration Measurement Results
CSM　01　01　01　01-2006 Specification for Uncertainty Evaluation of Titration Measurement Results
CSM 01 01 01 01-2006 CSM 01 01 01 01-2006 Uncertainty assessment specification of titration measurement result
CSM 01 01 01 07-2006 CSM 01 01 01 07-2006 Uncertainty assessment specification of measurement result of determination of carbon by gas-volumetric method
CSM 01010107-2006 Specification for Uncertainty Evaluation of Measurement Result of Determination of Carbon Quantity by Gas Volumetric Method

Tianjin Provincial Standard of the People's Republic of China

DB12/T 799-2018 Determination of arsine in workplace air by atomic fluorescence method

Hunan Provincial Standard of the People's Republic of China

DB43/T 2428-2022 Technical specification for water conservancy project management and protection scope delineation
DB43/T 2066-2021 Technical regulations for the delineation of river and lake management scope

Occupational Health Standard of the People's Republic of China

GBZ/T 300.137-2017 Determination of toxic substances in workplace air―Part 137: Ethylamine,ethylenediamine and cyclohexylamine
GBZ/T 300.9-2017 Determination of toxic substances in workplace air―Part 9: Chromium and its compounds
GBZ/T 300.18-2017 Determination of toxic substances in workplace air—Part 18: Mercury and its compounds
GBZ/T 300.33-2017 Determination of toxic substances in workplace air—Part 33: Metals and their compounds
GBZ/T 300.81-2017 Determination of toxic substances in workplace air—Part 81: Chlorobenzene, dichlorobenzene and trichlorobenzene
GBZ/T 300.73-2017 Determination of toxic substances in workplace air—Part 73: Methyl chloride, dichloromethane, chloroform and carbon tetrachloride
GBZ/T 300.47-2017 Determination of toxic substances in workplace air—Part 47: Arsenic and its inorganic compounds
GBZ/T 300.114-2017 Determination of toxic substances in workplace air―Part 114: Oxalic acid and phthalic acid
GBZ/T 300.112-2017 Determination of toxic substances in workplace air―Part 112: Formic acid and acetic acid

National Metrological Technical Specifications of the People's Republic of China

JJF 1738-2019 Calibration Specification for the Upper Limit of Dynamic Range of High Sound Pressure Measuring Microphones
JJF 1088-2002 Calibration Specification for Micrometers with Measuring Range from 500mm to 3000mm

Professional Standard - Commodity Inspection

SN/T 2003.5-2006 Determination of lead, mercury, chromium, cadmium and bromine in electrical and electrical and electronic equipment. Part 5: Qualitative screening by energy dispersive X-ray fluorescence spectrometric method
SN/T 2427-2010 Determination of melting temperature and melting temperature range of chemicals for import and export by differential scanning calorimetry

Professional Standard - Judicatory

SF/Z JD0103005-2014 Implementation Specification for Forensic Identification of Peripheral Nerve Injury

Hubei Provincial Standard of the People's Republic of China

DB4202/T 15-2021 Determination of Procymidone Residues in Wine by Gas Chromatography

Shandong Provincial Standard of the People's Republic of China

DB37/T 4481.1-2021 Determination of pesticides residues in soil—Liquid chromatography-mass spectrometry—Part 1:Determination of 9 triazole fungicides residues
DB37/T 4481.2-2021 Determination of pesticides residues in soil—Liquid chromatography-mass spectrometry—Part 2:Determination of 6 herbicides

Anhui Provincial Standard of the People's Republic of China

DB34/T 4534-2023 Determination of cyhalofop-methyl and its metabolite residues in plant-derived products
DB34/T 2560-2015 PSP-qPCR Absolute Quantitative Method for Rapid Quantitative Determination of Microbial Community Structure in Pit Mud

Professional Standard - Energy and Power Planning

DL/T 5376-2007 Specifications for drawing-up of boundary line of land requisition and treatment of hydroelectric project

Professional Standard - Energy

NB/T 10338-2019 Code for Defining Land Requisition Treatment Scope of Hydropower Projects

Beijing Provincial Standard of the People's Republic of China

DB11/T 2228-2024 Guidelines for delineating the protection scope of cultural relics protection units

International Organization for Standardization (ISO)

ISO/PRF 12141:2024 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
ISO/DIS 12141:2023 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
ISO 12141:2024 Stationary source emissions — Determination of low range mass concentration of dust — Manual gravimetric method
ISO 16703:2004 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
ISO 16811:2025 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
ISO 6299:1998 Petroleum products - Determination of dropping point of lubricating greases (wide temperature range)
ISO/R 1906:1971 Cresolic acid and xylenol industrial use determination of distillation range
ISO 9378:1993 Photography; vesicular microfilm; determination of ISO speed and ISO range
ISO 3924:2010 Petroleum products - Determination of boiling range distribution - Gas chromatography method
ISO 3924:2016 Petroleum products - Determination of boiling range distribution - Gas chromatography method
ISO 3924:1977 Petroleum products; Determination of boiling range distribution; Gas chromatography method
ISO 9378 Photography - Vesicular microfilm - Determination of ISO speed and ISO range
EN ISO 16703:2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
ISO 5636-6:2015 Paper and board - Determination of air permeance (medium range) - Part 6: Oken method
ISO 8654:1987 Colours of gold alloys; Definition, range of colours and designation

British Standards Institution (BSI)

BS EN 13284-1:2017 Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method
BS EN 13284-2:2017 Stationary source emissions. Determination of low range mass concentration of dust. Quality assurance of automated measuring systems
23/30464141 DC BS ISO 12141. Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method
BS ISO 16703:2004 Soil quality. Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
BS 4633 and 4634:1970 Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range
BS EN ISO 16703:2011 Soil quality. Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
BS EN ISO 16811:2025 Non-destructive testing. Ultrasonic testing. Sensitivity and range setting
BS 658:1962 Specification for apparatus for the determination of distillation range (including flasks and receivers)
BS 658:1989(2007) Specification for Apparatus for the determination of distillation range (including flasks and receivers)
BS EN ISO 17201-1:2005 Acoustics - Noise from shooting ranges - Part 1:Determination of muzzle blast by measurement
BS EN 14039:2004 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
BS ISO 5636-6:2015 Paper and board. Determination of air permeance (medium range). Oken method
BS ISO 9022-1:2016 Optics and photonics. Environmental test methods. Definitions, extent of testing
PD IEC/TR 62935:2016 Measurement methods. High dynamic range video
BS EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles
BS PD IEC/TR 62935:2016 Measurement methods. High dynamic range video
BS 4591:1971 Method for the determination of distillation characteristics (distillation range and distillation yield)
BS ISO 5636-4:2005 Paper and board. Determination of air permeance (medium range)-Sheffield method
BS ISO 5636-4:2013 Paper and board. Determination of air permeance (medium range). Sheffield method
24/30482441 DC BS EN ISO 16703 Environmental Solid Matrices. Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
BS IEC 63175:2021 Fixed energy high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV

German Institute for Standardization

DIN 67519:1970 Actinity in the field of optics; definition, measurement, application
DIN 50472:1981-03 Testing of permanent magnets; determination of the magnetic flux values in the working range
DIN EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems; German version EN 13284-2:2004
DIN EN 13284-1:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2017
DIN EN 13284-2 E:2016 Draft Document - Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems; German and English version prEN 13284-2:2016
DIN EN 13284-2:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems; German version EN 13284-2:2017 / Note: Applies in conjunction with DIN EN 14181 (2015-02).
DIN EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
DIN 50472:1981 Testing of permanent magnets; determination of the magnetic flux values in the working range
DIN EN 13284-1 E:2015 Draft Document - Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German and English version prEN 13284-1:2015
DIN 54200:1974 Testing of textiles; quantitative analysis of fibre mixtures by means of solvent method, basis and field of application
DIN EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2001
DIN EN 13284-2 E:2016-04 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
DIN ISO 16703 E:2002-03 Soil quality - Determination of content of hydrocarbon in the range C<(Index)10> to C<(Index)40> by gas chromatography
DIN EN 13284-2 E:2003-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
DIN EN 13284-1 E:2015-12 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
DIN 51751:1996 Testing of liquid mineral oil hydrocarbons to determine the distillation range
DIN EN 14039:2005 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography; German version EN 14039:2004
DIN ISO 16703:2005 Soil quality - Determination of content of hydrocarbon in the range C<(Index)10> to C<(Index)40> by gas chromatography (ISO 16703:2004);English version of DIN ISO 16703:2005
DIN EN 14039:2005-01 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography; German version EN 14039:2004
DIN 51790-3:1978-04 Testing of Liquid Fuels; Determination of Vanadium Content; Vanadium Content in the Range of 0.4 to 4.0 mg/kg; Determination by Flameless Atomic Absorption Spectroscopy after Incineration
DIN 55437-2:1992 Testing of board; testing of creasings; determination of creasing range by visual assessment of creasings
DIN 51790-3:1978 Testing of Liquid Fuels; Determination of Vanadium Content; Vanadium Content in the Range of 0.4 to 4.0 mg/kg; Determination by Flameless Atomic Absorption Spectroscopy after Incineration
DIN 51435:1989 Testing of petroleum products; determination of boiling range distribution; gas chromatography method
DIN 55437-2 E:2021-02 Testing of board - Creasings - Part 2: Determination of creasing range by visual assessment of creasings
DIN 55437-2:2008 Testing of board - Creasings - Part 2: Determination of creasing range by visual assessment of creasings
DIN 32736:2000-08 Building Management - Definitions and scope of services
DIN 19204:1976 Flow measurement; ranges, divisions and inscriptions of scales for flow indicators
DIN EN 13284-1:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2017
DIN 51435:2010 Testing of petroleum products - Determination of boiling range distribution - Gas chromatography method
DIN ISO 16703:2005-12 Soil quality - Determination of content of hydrocarbon in the range C<(Index)10> to C<(Index)40> by gas chromatography (ISO 16703:2004)
DIN EN ISO 16703:2011-09 Soil quality - Determination of content of hydrocarbon in the range C<(Index)10> to C<(Index)40> by gas chromatography (ISO 16703:2004); German version EN ISO 16703:2011
DIN 51855-1:2011-09 Testing of gaseous fuels and other gases - Determination of the content of sulphur compounds - Part 1: Field of application, terms
DIN 51855-1:1999-05 Testing of gaseous fuels and other gases - Determination of the content of sulphur compounds - Part 1: Field of application, terms
DIN EN 481:1993-09 Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993
DIN IEC 63175:2023-01*VDE 0412-40:2023-01 Fixed energy high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV
DIN 32736:2000 Building Management - Definitions and scope of services
DIN 32736 Building Management - Definitions and scope of services
DIN ISO 9022-1:1999-05 Optics and photonics - Environmental test methods - Part 1: Definitions, extent of testing
DIN 4844-1 Berichtigung 1:2003-04 Safety signs Part 1: Measurement and identification range
DIN EN ISO 3924 E:2017-07 Determination of boiling point range distribution of petroleum products by gas chromatography (draft)
DIN EN ISO 16703:2024 Environmental solid matrices - Determination of hydrocarbon content in the range of C to C by gas chromatography (ISO/DIS 16703:2024); German and English version prEN ISO 16703:2024
DIN 53120-1:1998-06 Determination of medium-range air permeance of paper and board by the Bendtsen method
DIN 4002-5:2010 Properties and their scopes for product data exchange - Part 5: Units for quantitative properties
DIN EN ISO 3924 E:2015-07 Determination of boiling point range distribution of petroleum products by gas chromatography (draft)
DIN EN ISO 16811 E:2024-02 Draft Document - Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO/DIS 16811:2024); German and English version prEN ISO 16811:2024

NL-NEN

NEN 1765-1984 Paper and board - Determmation of bursting strength (measuring range 70-1100 kPa)
NEN 3057-1970 Plastics. Determlnation of temperature of deflectlon under load and deflection temperature range

Ente Nazionale Italiano di Unificazione

UNI SPERIMENTALE 10127-1:1992 Guide for the definition of measuring instruments calibration intervals. General criteria.
UNI 10526:1997 Filter paper. Determination of air permeance (high range). Constant differential pressure method.
UNI SPERIMENTALE 10127-2:1992 Guide for the definition of measuring instruments calibration intervals. Advised interval for measuring instrument used for geometrical, angular and linear dimensions.
UNI EN 28654:1994 Colours of gold alloys. Definition, range of colours and designation.
UNI 7629-4:1986 Paper and board. Determination of air permeance (medium range). Gurley method.
UNI CEN/TS 15447:2006 Mounting and fixing in reaction to fire tests under the Construction Products Directive
UNI ISO 5636-5:2014 Paper and board - Determination of air permeance (medium range) - Part 5: Gurley method

GCC Standardization Organization

BH GSO OIML D12:2024 Fields of use of measuring instruments subject to verification
GSO ASTM D4810:2024 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
GSO ISO 16703:2014 Soil quality -- Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
GSO ISO 6299:2015 Petroleum products -- Determination of dropping point of lubricating greases (wide temperature range)
GSO ISO 5636-5:2015 Paper and board -- Determination of air permeance (medium range) -- Part 5: Gurley method
GSO ISO 3432:2015 Cheese -- Determination of fat content -- Butyrometer for Van Gulik method
GSO ISO 21550:2013 Photography -- Electronic scanners for photographic images -- Dynamic range measurements

Spanish Association for Standardization (UNE)

UNE-EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
UNE-EN 13284-1:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
AENOR UNE-EN 13284-1:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
UNE-EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
UNE 16300:1975 DEFINITION, DESIGNATION AND MEASURES AND PROFILES RANGE OF AGLOMERATED ABRASIVE PRODUCTS.
AENOR UNE-EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
UNE-EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust- Part 1: Manual gravimetric method.
UNE-EN ISO 16703:2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography (ISO 16703:2004) (Endorsed by AENOR in February of 2012.)
UNE 7 045 Determination of a range of porosity
UNE 109001:1992 CHEMICALS STORAGE. DANGEROUS RANGE: DEFINITIONS.
UNE 7 016 Determination of a range retraction limit
UNE 81582:1991 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF CHLORINATED HYDROCARBONS IN AIR
UNE-EN 14039:2005 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
UNE 81588:1991 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF VYNIL CHLORIDE IN AIR
UNE-EN 481:1995 WORKPLACE ATMOSPHERES. SIZE FRACTION DEFINITIONS FOR MEASUREMENT OF AIRBORNE PARTICLES.
UNE 22-580-1990 Open pit mine power installation. Scope and definition
UNE-ISO 5636-3:2015 Paper and board. Determination of air permeance (medium range). Part 3: Bendtsen method
UNE-ISO 5636-5:2015 Paper and board. Determination of air permeance (medium range). Part 5: Gurley method

Standards Norway

NS-EN 13284-2:2004 Stationary source emissions — Determination of low range mass concentration of dust — Part 2: Automated measuring systems
NS-EN 13284-1:2001 Stationary source emissions — Determination of low range mass concentration of dust — Part 1: Manual gravimetric method
NS-EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
NS-EN 13284-2:2017 Stationary source emissions — Determination of low range mass concentration of dust — Part 2: Quality assurance of automated measuring systems
NS 848:1954 Area and volumes of buildings — Rules for measurement
NS-EN 14039:2004 Characterization of waste — Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
NS-EN ISO 16703:2011 Soil quality — Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography (ISO 16703:2004)
NS 8152:1985 Woodworking machines - Measurement of noise - Determination of sound pressure level at the operator's and other specified positions around the machine

Lithuanian Standards Office

LST EN 13284-2-2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
LST EN 13284-1-2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
LST EN ISO 16703:2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography (ISO 16703:2004)
LST EN 14039-2004 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography

Danish Standards Foundation

DS/EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
DANSK DS/EN 13284-1:2017 Stationary source emissions – Determination of low range mass concentration of dust – Part 1: Manual gravimetric method
DS/EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
DANSK DS/EN 13284-2:2017 Stationary source emissions – Determination of low range mass concentration of dust – Part 2: Quality assurance of automated measuring systems
DANSK DS/EN ISO 16703:2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
DS/EN ISO 16703:2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
DANSK DS/EN 14039:2005 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
DANSK DS/IEC TR 62935:2016 Measurement methods – High dynamic range video
DS/EN 14039:2005 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
DANSK DS/EN 583-2:2001 Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting

Association Francaise de Normalisation

NF X43-333-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : automated measuring systems.
NF X43-333-1*NF EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : Manual gravimetric method
NF X43-333-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : manual gravimetric method.
NF X31-431*NF EN ISO 16703:2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
NF X30-301:1998 Environmental management. Life cycle assessment. Goal and scope definition and inventory analysis.
NF X30-405*NF EN 14039:2005 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
NF C97-905:1994 Ultrasonic power measurement in liquids in the frequency range 0,5 MHzto 25 MHz.
NF M60-520:1989 Dosimetry of X and gamma reference radiations for radiation protection over the energy range from 8 kev to 1,3 mev.
NF ISO 8559-3:2019 Designation of clothing sizes - Part 3: methodology for creating body measurement scales and intervals
NF C97-905/A1:2005 Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz.
NF EN 13402-3:2017 Clothing size designation - Part 3: size labeling based on body measurements and intervals
NF T60-632*NF ISO 6299:2006 Petroleum products - Determination of dropping point of lubricating greases (wide temperature range)
NF EN 14039:2005 Characterization of waste - Determination of hydrocarbon content by gas chromatography in the range C10 to C40
NF C97-909:2008 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz.
NF EN IEC 63180:2020 Measuring methods and qualification of detector detection range - Passive infrared detectors for detecting high and low amplitude movements
NF S10-030-1*NF ISO 9022-1:2016 Optics and photonics - Environmental test methods - Part 1 : definitions, extent of testing
NF T51-435:1985 Plastics. Solid phenolic resins. Determination of melting range by the capillary tube method.
NF ISO 5636-3:2014 Paper and cardboard - Determination of air permeability (range of average values) - Part 3: Bendtsen method
NF ISO 5636-5:2014 Paper and cardboard - Determination of air permeability (average value range) - Part 5: Gurley method
NF E11-107:2002 Geometrical Product Specification (GPS) - Spheres for metrology

Gosstandart of Russia

GOST 8.357-1979 State system for ensuring the uniformity of measurements. Laser radiation measuring instruments. Energy, spectral and time renges
GOST 8.503-1984 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring length within the range of 24-75000 m
GOST 8.061-1980 State system for ensuring the uniformity of measurements. Verification schedules. Scope and layont
GOST 8.564-1998 State system for ensuring the uniformity of measurement. State verification scheme for means of measuring electrical capacity in frequency range from 1 to 100 MHz
GOST 16863-1971 Measuring generators for frequency range 0,1-35 MHz. Methods and means of verification
GOST 32322-2013 Lubricating greases. Determination of dropping point over wide temperature range
GOST R 8.643-2008 State system for ensuring the uniformity of measurements. Reflectometers for extreme ultraviolet in region 10 - 30 nm. Verification procedure
GOST 8.560-1994 State system for ensuring the uniformity of measurements. State verification shedule for measure of electric field intensity measuring within freguency range 0.0003-1000 MGz
GOST 32326-2013 Lubricating greases. Determination of evaporation loss over wide-temperature range
GOST 8.144-1997 State system for ensuring the uniformity of measurements. State verification schedule for measuring means of magnetic induction of state magnetic fields within the range from 0,05 TO 2 T
GOST 34616-2019 Food products, food raw materials. Determination of polycyclic aromatic hydrocarbons mass range by high-performance liquid chromatography with fluorometric detection
GOST 2706.13-1974 Benzene hydrocarbons and allied products. Method of determination of boiling range
GOST R ISO 10473-2007 Ambient air. Measurement of the mass of particulate matter on a filter medium. Beta-ray absorption method
GOST R 56510-2015 Metrological assurance in the field of non-destructive testing
GOST 8.223-1976 State system for ensuring the uniformity of measurements. State special standard and all-union verification for means measuring absolute pressure within the range of 2,7·10 in 2 degree to 4000·10 in 2 degree Pa
GOST 9865-1976 Ultrasonic installations. Range of nominal electric powers
GOST 8.144-1975 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means, measuring magnetic induction within the range of 0,05 to 2T
GOST 33454-2015 Testing of chemicals of environmental hazard. Determination of the melting point/melting range
GOST 1164-1986 Knitted headwear and scarves. Determination of grades
GOST R 8.797-2012 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring the heat flux surface density in the range from 1 to 10000 W/m2
GOST 8.145-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of liquids within the range of 3·10 in minus 6 degree up to 10 m3/sec
GOST R 54291-2010 Crude petroleum. Gas chromatography method for determination of components boiling temperature range distribution
GOST R 54291-2010(2019) Crude petroleum. Gas chromatography method for determination of components boiling temperature range distribution
GOST 8.038-1994 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the airborne sound pressure in the frequencys range 2 Hr -100 kHr
GOST 8.410-1981 State system for ensuring the uniformity of measurements. State verification schedule for means measuring plasma temperature of 10000-15000 K in the visible and ultraviolet
GOST 30114-1995 Paper and board. Determination of air permeance (medium range). General requirements for methods

Magyar Szabványügyi Testület

MSZ 5105-1961 Comprehensive testing of steel, pig iron and cast iron. Phosphorus content range setting
MSZ 5104-1961 Comprehensive testing of steel, pig iron and cast iron. sulfur content range setting

YU-JUS

JUS H.B8.256-1983 Methanol for industrial use. Determination of distillation range
JUS M.C2.204-1989 Parallel pins, hardened (dovvel pins), tolerance zone rr>6

South African Bureau of Standard

R 50-04 Estimation of the Uncertainty of Measurement by Calibration Laboratories and Specification of Calibration and Measurement Capability on Scopes of Accreditation

European Committee for Standardization (CEN)

EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
EN 13284-1:2001 Stationary Source Emissions - Determination of Low Range Mass Concentration of Dust - Part 1: Manual Gravimetric Method
EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 14039:2004 Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
prEN ISO 16703 Environmental Solid Matrices - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography (ISO/DIS 16703:2024)
EN ISO 8654:2018 Jewellery - Colours of gold alloys - Definition@ range of colours and designation
EN ISO 4037-2:2021 Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,

VN-TCVN

TCVN 3188-1979 Rating current range
TCVN 4382-1986 Measuring equipments.Verification schedule.Scope and layout
TCVN 5543-1991 Colour of gold alloys.Definitions,range of colours and desinstion

Korean Agency for Technology and Standards (KATS)

KS I ISO 16703:2005 Soil quality－Determination of content of hydrocarbon in the rangeC10 to C40 by gas chromatography
KS A ISO 11929-7:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 7：Fundamentals and general applications
KS A ISO 11929-7:2008 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 7:Fundamentals and general applications
KS A ISO 11929-6:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 6：Fundamentals and applications to measurements by use of transient mode
KS A ISO 11929-6:2008 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 6:Fundamentals and applications to measurements by use of transient mode
KS M 3007-1980(2001) DETERMINATION OF THE RESISTANCE OF PLASTICS TO CHEMICAL SUBSTANCES
KS M 3007-1980 DETERMINATION OF THE RESISTANCE OF PLASTICS TO CHEMICAL SUBSTANCES
KS I ISO 16703-2021 Soil quality — Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
KS I ISO 16703:2021 Soil quality — Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
KS I ISO 16703-2005(2015) Soil quality－Determination of content of hydrocarbon in the rangeC10 to C40 by gas chromatography
KS A ISO 11929-8:2008 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 8:Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment
KS A ISO 11929-1:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 1:Fundamentals and application to counting measurements without the influence of sample treatment
KS A ISO 11929-8:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 8：Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment
KS B ISO 16811-2024 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
KS A ISO 11929-1:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 1：Fundamentals and application to counting measurements without the influence of sample treatment
KS P ISO 7176-4:2012 Wheelchairs-Part 4:Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range
KS A ISO 11929-2:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 2：Fundamentals and application to counting measurements with the influence of sample treatment
KS A ISO 11929-2:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 2:Fundamentals and application to counting measurements with the influence of sample treatment
KS A ISO 6846:2004 Photography－Black-and-white continuous-tone papers－Determination of ISO speed and ISO range for printing
KS M ISO 6299:2003 Petroleum products－Determination of dropping point of lubricating greases(wide temperature range)
KS A ISO 11929-5:2008 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 5:Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
KS A ISO 11929-5:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 5：Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
KS M ISO 3924:2013 Petroleum products ?; Determination of boiling range distribution ?; Gas chromatography method
KS M ISO 3924:2021 Petroleum products — Determination of boiling range distribution —Gas chromatography method
KS M ISO 3924-2021 Petroleum products — Determination of boiling range distribution —Gas chromatography method
KS M ISO 3924:2003 Petroleum products-Determination of boiling range distribution-Gas chromatography method
KS A ISO 11929-3:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry without the influence of sample treatment
KS A ISO 11929-3:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry without the influence of sample treatment
KS B ISO 9022-1-2018 Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
KS B ISO 9022-1:2018 Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
KS M ISO 4626-2002(2017) Volatile organic liquid－Determination of boiling range of organic solvents used as raw material
KS A ISO 11929-4:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 4：Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
KS D ISO 8654-2003(2018) Colours of gold alloys－Definition, range of colours and designation
KS A ISO 11929-4:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 4:Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
KS M ISO 5636-2:2008 Paper and board－Determination of air permeance(medium range)－Part 2：Schopper method
KS M ISO 5636-2:2007 Paper and board－Determination of air permeance(medium range)－Part 2：Schopper method
KS M ISO 5636-2-2007 Paper and board－Determination of air permeance(medium range)－Part 2：Schopper method
KS M ISO 5636-5-2022 Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method

CZ-CSN

CSN 65 0312-1986 Organic chemical products etermination of distilling range
CSN 80 0063-1964 Determination of the range of seleotion of samples of textile raw materials and yarns
CSN 25 1442-1974 Micrometer depth for measuring ranges 0 to 100 mm

Defense Logistics Agency

DLA MIL-DTL-52701 C-2009 INDICATOR SOLUTION, pH DETERMINATION (RANGE 3.0 TO 11.0)
DLA MIL-I-52701 B-1991 INDICATOR SOLUTION, PH DETERMINATION (RANGE 3.0 TO 11.0)
DLA MIL-I-52701 B VALID NOTICE 2-2004 INDICATOR SOLUTION, PH DETERMINATION (RANGE 3.0 TO 11.0)
DLA MIL-I-52701 B NOTICE 1-1998 INDICATOR SOLUTION, PH DETERMINATION (RANGE 3.0 TO 11.0)

PL-PKN

PN C81549-01-1986 Paints and varnishes Determination of toxic metals content General, scope of the standard
PN A74042-01-1993 Cereals and cereal products Determination of wet gluten by mechanical means General principles and scope of standard
PN C04547 ArkusZ00-1974 Wa?er and was?e water Test* for carbon dioxide In?roduc?ion and scope of the standard
PN C99465 ArkusZ00-1974 Methods for determination of photo- graphic values of light sensitive ma- terials Introduction and scope of the standard

SE-SIS

SIS 65 00 71-1963 Textilen. Determination of rope circumference
SIS SS 3477-1983 Woodworking machines - Measurement of noise - Determination of sound pressure level at the operator's and other specified positions around the machine

American Society for Testing and Materials (ASTM)

ASTM E1895-07 Standard Guide for Determining Uses and Limitations of Deterministic Fire Models
ASTM F2682-07 Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
ASTM F2682-07(2012)e1 Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
ASTM E1895-97 Standard Guide for Determining Uses and Limitations of Deterministic Fire Models
ASTM E1895-04e1 Standard Guide for Determining Uses and Limitations of Deterministic Fire Models
ASTM E1895-04 Standard Guide for Determining Uses and Limitations of Deterministic Fire Models
ASTM D1826-94(2003) Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
ASTM D6620-06(2010) Standard Practice for Asbestos Detection Limit Based on Counts
ASTM F418-77(2002) Standard Practice for Preparation of Samples of the Constant Composition Region of Epitaxial Gallium Arsenide Phosphide for Hall Effect Measurements
ASTM D1519-95(2014) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM C1068-15 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM D1826-94(2017) Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
ASTM D4891-89(1994)e1 Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
ASTM D1826-94(2010) Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
ASTM D1826-77 Standard Test Method for Calorific Value Of Gases In Natural Gas Range By Continuous Recording Calorimeter
ASTM D1519-95(2023) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM E2938-15(2023) Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range
ASTM D1519-95(2019) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D2977-14 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D2977-71(1998) Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D6240/D6240M-24 Standard Tables of Body Measurements for Adult Male, Chest Size Range 34 – 52 Short, Regular, and Tall
ASTM D2977-22 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D7398-07 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615C by Gas Chromatography
ASTM E2938-15 Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range
ASTM RR-D02-1645 2008 D7170-Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel OilsFixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM F875-94(2003) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(1998) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(2003)e1 Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-09 Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM D7382-08 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

ETSI - European Telecommunications Standards Institute

ETR 171-1995 Methods for Testing and Specification (MTS); Proforma for Scoping Reports

Military Standards (MIL-STD)

MIL MIL-DTL-52701C-2009 Indicator Solution, Ph Determination (Range 3.0 to 11.0)
MIL MIL-I-52701B-1991 INDICATOR SOLUTION, PH DETERMINATION (RANGE 3.0 TO 11.0) (SUPERSEDING MIL-I-52701A)

FI-SFS

SFS 4283-1979 Building area measurement. Small range basic measurement
SFS 5517-1989 Air conditioning device. Determination of the acceptable range of air conditioning systems. Noise measurement

ETSI

ETSI ETR 171 ed.1 (1995-02)-1995 Methods for Testing and Specification (MTS); Proforma for scoping reports

Swedish Institute for Standards

SS-ISO 16703:2005 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography (ISO 16703:2004, IDT)
SS-EN ISO 16811:2025 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting (ISO 16811:2025, IDT)
SS-EN ISO 16703:2011 Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography (ISO 16703:2004)

International Electrotechnical Commission (IEC)

IEC 60302:1969 Standard definitions and methods of measurement for piezoelectric vibrators operating over the frequency range up to 30 MHz
IEC TR 62935:2016 Measurement methods - High dynamic range video
IEC 63175:2021 Fixed energy high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV
CISPR 4:1967 CISPR measuring set specification for the frequency range 300 MHz to 1 000 MHz

Japanese Industrial Standards Committee (JISC)

JIS Z 4324:2009 Area monitors for X and Gamma rays
JIS D 1301:2001 Electric vehicle -- Measurement for driving range and energy consumption

Society of Automotive Engineers (SAE)

SAE J317-1967 The Range of Anthropometric Measurements for Asian Populations
SAE J317_196711 The Range of Anthropometric Measurements for Asian Populations

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

REPORT SM.2155-2009 Man-made noise measurements in the HF range
INFORME SM.2155 SPANISH-2009 Man-made noise measurements in the HF range

International Telecommunication Union (ITU)

ITU-R INFORME SM.2155 SPANISH-2009 Man-made noise measurements in the HF range
ITU-R REPORT SM.2155-2009 Man-made noise measurements in the HF range
ITU-T B.15-1988 Nomenclature of the frequency and wavelength bands used in telecommunications
ITU-T O.82 FRENCH-1988 GROUP-DELAY MEASURING EQUIPMENT FOR THE RANGE 5 TO 600 kHz

AT-ON

ONORM S 5280-1-1998 Radon - Measuring methods and their r?nge of applications

American National Standards Institute （ANSI)

ANSI/EIA 535BAAC-A:1998 Fixed Tantalum Chip Capacitor Style 1 Protected – Standard Capacitance Range
ANSI PH2.2-1984 Photography (Sensitometry) - Black-and-White Continuous-Tone Papers - Determination of ISO Speed and Range for Printing
ANSI/ASTM D7398:2007 Test Method for the Boiling Range Distribution of Fatty Acid Methyl Esters (fame) in the Boiling Range from 100 to 615 C by Gas Chromatography

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 6299:2016 Petroleum products -- Determination of dropping point of lubricating greases (wide temperature range)
BH GSO ISO 5636-5:2016 Paper and board -- Determination of air permeance (medium range) -- Part 5: Gurley method

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 6299:2015 Petroleum products -- Determination of dropping point of lubricating greases (wide temperature range)

Electronic Components, Assemblies and Materials Association

ECA 535BAAA-1987 Fixed Tantalum Chip Capacitor Style 1 Protected-Standard Capacitance Range
ECA 535BAAB-1987 Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range

Association of German Mechanical Engineers

VDI/VDE 3511 BLATT 4.3-2005 Technical temperature measurements — Radiation thermometry — Standard test methods for radiation thermometers with a wavelength range

US-CFR-file

CFR 11-100.1-2014 Federal elections. Part100:Scope and definitions (52 U.S.C. 30101). SubpartA:General definitions. Section100.1:Scope.
CFR 11-100.110-2014 Federal elections. Part100:Scope and definitions (52 U.S.C. 30101). SubpartD:Definition of expenditure (52 U.S.C. 30101(9)). Section100.110:Scope.

Standard Association of Australia （SAA）

TR 2961-2007 Telehealth standards scoping study

International Laboratory Accreditation Cooperation

ILAC G28:07/2018 Guideline for the Formulation of Scopes of Accreditation for Inspection Bodies

TR-TSE

TS 1957-1975 CRESYLIC ACID AND XYLENOLS FOR INDUSTRIAL USE DETERMINATION OF DISTILLATION RANGE

The American Road & Transportation Builders Association

AASHTO PP 97-2019(2023) Standard Practice for Determination of Constant Mass
AASHTO PG07-1-2007 DEFINING THE PURPOSE AND NEED AND DETERMINING THE RANGE OF ALTERNATIVES FOR TRANSPORTATION PROJECTS

Bureau of Indian Standards

IS/ISO 5636-3-1992 Paper and Board â€” Determination of Air Permeance (Medium range), Part 3 Bendtsen Method

American Petroleum Institute (API)

API 4060- FORMULATION OF A PROGRAM FOR THE DETERMINATION OF THE RANGE OF CARBOXYHEMOGLOBIN IN THE U.S.

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI)

ARI 575-1994 Method of Measuring Machinery Sound Within an Equipment Space

Universal Oil Products Company (UOP)

UOP 1-1987 DISTILLATION RANGE OF HEAVY PETROLEUM OILS AND DETERMINATION OF COKE RESIDUE

International Truck and Engine Corporation (ITEC)

INTERN CEMS BT-40-2009 Determination Of Equilibrium Boiling Range And High Boiling Impurities in Air Conditioner Refrigerant