DC withstand voltage test

DC withstand voltage test, Total:310 items.

The international standard classification for "DC withstand voltage test" includes: Electrical insulation in general , Power stations in general , Transformers. Reactors , Other equipment related to power transmission and distribution networks , Rectifiers. Convertors. Stabilized power supply , Nuclear energy engineering , Electrical wires and cables , Power transmission and distribution networks in general , Electrical and electronic testing , Measurement of electrical and magnetic quantities , Power capacitors , Electrical engineering in general , Wastes , Electricity. Magnetism. Electrical and magnetic measurements .

The Chinese standard classification for "DC withstand voltage test" includes: Electric transmission and transformation equipment in general , Electric power testing technique , Transformer , Power semiconductor device and parts , Nuclear instrument and detector in general , Cable and its accessory , Electrical instrument and meter in general , AC/DC electrical instrument recording instrument , Power capacitor , Extensive magnitude and exchanger , Basic standards and general methods , Digital display instrument , Electric power system , AC/DC supply units , Technical Management , Electrical parametric test and power supply unit , Environmental protection equipment , Electromagnetic Measurement .

Professional Standard - Energy and Power Planning

DL/T 1669-2016 Guidelines for the implementation of on-site DC voltage withstand test for ±800kV DC equipment
DL/T 1399.4-2020 Electric power testing and measuring vehicles-Part 4:Testing vehicle for AC withstand voltage on switchgear
DL/T 1513-2016(英文版) Electrical test of voltage source converter valve for flexible DC transmission
DL/T 1301-2012 Guidelines for DC voltage withstand test of submarine oil-filled cables
DL/T 1301-2013 Guideline of DC Withstand Test for Submarine Oil-filled Power Cable
DL/T 1799-2018 The method of ability to withstand DC bias test for power transformers
DL/T 1513-2016 Voltage Sourced Converter (VSC) Valves for VSC-HVDC Transmission—Electrical Testing
DL/T 1999-2019 Method of on-site DC partial discharge test for converter transformer
DL/T 2503-2022 Guidelines for DC bias magnetic testing of transformers under single-pole geodetic loop operation mode of DC transmission systems
DL/T 1015-2019 Guide for application of voltage measuring system in DC&AC high voltage tests on site
DL/T 1015-2006 Guide for application of voltage measuring system in DC&AC high voltage tests on site
DL/T 1130-2009 System Test Satandard for HVDC Project
DL/T 2038-2019 Measurement method of DC magnetic field from high voltage DC transmission project
DL/T 2225-2021 Guide for DC demagnetization test on power transformers
DL/T 1323-2014 Guidance for Measurement of Voltage in On-site Wide Frequency AC Voltage Withstand Test
DL/T 2184-2020 Test guide for transient behaviour of DC voltage transformers for DC transmission system

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25308-2010 D.C. Filters for HVDC transmission system
GB/T 26216.1-2019 DC current measuring device for HVDC transmission system—Part 1:Electronic DC current measuring device
GB/T 26216.1-2010 DC current measuring device for HVDC transmission system—Part 1:Electronic DC current measuring device
GB/T 30553-2014 High-voltage Direct Current Power Transmission Using Voltage Sourced Converters
GB/T 20993-2007 DC filter capacitors for HVDC transmission systems
GB/T 26217-2019 DC voltage measuring device for HVDC transmission system
GB/T 3928-1983 D.C.resistive volt ratio boxes
GB/T 43534-2023 Design and testing methods for AC side impedance of voltage source converter based high voltage direct current（VSC-HVDC） transmission
GB/T 32192-2015 Withstanding voltage tester
GB/T 43534-2023(英文版) Design and Testing Method of AC Side Impedance for Voltage Source Converters in High Voltage Direct Current Transmission
GB/T 10261-1988 Test procedures for stabilized d.c high/low voltage power for nuclear instruments
GB/T 3928-2008 D．C．resistive volt ratio boxes
GB/T 30553-2023 High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC)
GB/T 35727-2017 Guideline for standard voltages of medium and low voltage DC distribution system
GB/T 26217-2010 DC voltage measuring device for HVDC transmission system
GB/T 14913-1994 Digital electronic d.c.voltmeters and d.c.electronic analogue-to-digital convertors
GB/T 32130-2015 DC PLC filter capacitors for HVDC transmission systems
GB/T 14913-2008 Digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital convertors
GB/T 13498-2007 Terminology for high-voltage direct current(HVDC)transmission
GB/T 10261-2008 Stabilized d.c power supply for nuclear radiation detectors
GB/T 35711-2017 Analysis, restrain and measurement of harmonics of DC side of high voltage direct current (HVDC) transimission system
GB/T 16896.3-2024 Instruments and software used for measurements in high-voltage and high-current tests—Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
GB/T 21560.6-2008 Low-voltage power supplies d.c. output - Part 6: Requirements for low-voltage power supplies assessed performance
GB/T 26216.2-2019 DC current measuring device for HVDC transmission system—Part 2:Electromagnetic DC current measuring device
GB/T 33348-2024 Voltage sourced converter valves for high-voltage direct current power transmission—Electrical testing
GB/T 3048.14-1992 Electric cables and wires-Method for D.C.voltage test
GB/T 25308-2022 DC filters for high voltage direct current (HVDC) transmission system
GB/T 26216.2-2010 DC current measuring device for HVDC transmission system—Part 2:Electromagnetic DC current measuring device
GB/T 33348-2016 Voltage sourced converter valves for high一voltage direct current power transmission一Electrical testing

Professional Standard - Electron

SJ 449-1973 Methods of measurement for voltage with standing test for high-voltage rectifier tubes
SJ 2315-1983 Methods of measurement for d.c. digital voltmeters

Group Standards of the People's Republic of China

T/CSEE 0213-2021 Test methods for low-voltage three-level AC/DC, DC/DC bidirectional converters
T/CEC 107-2016 DC distribution voltage
T/MBJX 0006-2021 Test method for electrical parameters of DC high voltage generator
T/CEC 374-2020 Test procedures for flexible DC negative pressure coupled high-voltage DC circuit breakers
T/JSEE 016-2020 UHV DC Protection Field Test Guidelines

State Grid Corporation of China

Q/GDW 499-2010 Guide for codition-based maintenance strategy of HVDC DC measurement device
Q/GDW 533-2010 Specifications for maintenance of high-voltage direct current transmission direct current measuring devices
Q/GDW 500-2010 Guide for condition evaluation of HVDC DC measurement device
Q/GDW 111-2004 Handover test procedures for high-voltage DC electrical equipment in DC converter stations

Professional Standard - Energy

NB/T 10457-2028 AC-DC switching power supply cooling fan air volume and pressure test method
NB/T 42039-2014 Wide voltage input and regulated output isolated DC?DC model power supply
NB/T 10457-2020 AC-DC switching power supply-Air flow and wind pressure for cooling fan-Test methods
DL/T 2835-2024 Direct Current Transformer Electrical Test Guide
NB/T 10450-2020 Insulating liquids-determination of the breakdown voltage at direct current field
NB/T 10285-2019 Fixed voltage input and unregulated output isolated DC-DC model power supply

Professional Standard - Nuclear Industry

EJ/T 634-1992 DC high voltage regulated power supply for nuclear detectors

Professional Standard - Machinery

JB/T 7585-2013 Tester for direct current low-resistence
JB/T 7585-1994 D.C. Low Resistance Tester
JB/T 9303-1999 d.c. stabilized supply apparatus for measurement
JB/T 11074-2011 HVDC current source power supply for electrostatic precipitator

Professional Standard - Education

JY 16-1988 DC high voltage power supply

Professional Standard - Aerospace

QJ 192-1975 Series of Voltage and Current for Low-voltage Small-power DC Stabilized Power Supply

National Metrological Verification Regulations of the People's Republic of China

JJG 445-1986 DC Standard Voltage Source
JJG 795-2016 Withstanding Voltage Testers
JJG 315-1983 Verification Regulation of DC Digital Voltmeter
JJG 795-2004 Verification Regulation of Withstanding Voltage Testers
JJG 531-2003 The DC Resistive Volt Ratio Box
JJG 1156-2018 Verification Regulation of DC Voltage Transformers

National Metrological Technical Specifications of the People's Republic of China

JJF(机械)1040-2020 Calibration specification for DC high voltage measurement system
JJF(机械) 1040-2020 Calibration specification for DC high voltage measurement system

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0481-356-2003*DIN EN 50356:2003 Method for spark testing of cables; German version EN 50356:2002
VDE 0472-510 DIN VDE 0472-510-1984*DIN 57472-510:1984 Testing of cables, wires and flexible cords; Resistance to direct current
VDE 0432-12-2018 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (IEC 42/351/CDV:2017); German version prEN 61083-3:2017
VDE 0553-975 E*DIN IEC 61975:2008-10 System tests for high-voltage direct current (HVDC) installations

Gosstandart of Russia

GOST 26130-1984 Electrical insulating paper. Methods for determination of electrical strength at alternating (frequency of 50 Hz) and constant voltage
GOST 18986.3-1973 Semiconductor diodes. Method of measuring of direct forward voltage and direct forward current
GOST 26033-1991 Metering amplifiers of direct current and its voltage. General technical requirements and methods of tests
GOST 20214-1974 Electrical conductive plastics. Test method for determination of specific volume electrical resistance at d.c. voltage
GOST 26033-1983 Metering amplifiers of direct current and its voltage. General specifications
GOST R 59030-2020 High-voltage direct current systems. Types and test methods
GOST 23366-1978 Series of rated voltages of direct and alternating current

British Standards Institution (BSI)

BS EN 62501:2009 Voltage sourced converter (VSC) valves for high-voltage direct current (H VDC) power transmission. Electrical testing
BS PD IEC TS 63471:2023 DC voltages for HVDC grids
BS EN 62501:2009+A1:2014 Voltage sourced converter (VSC) valves for high-voltage direct current ( HVDC) power transmission. Electrical testing
BS EN IEC 62501:2024 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission. Electrical testing
BS EN 62501:2009+A2:2017 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission. Electrical testing
BS EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests. Requirements for hardware for tests with alternating and direct voltages and currents
07/30158043 DC BS EN 62501. Electrical testing of voltage source converter (VSC) valves for high-voltage direct current (HVDC) power transmission
22/30447595 DC BS EN 62501. Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission. Electrical testing
11/30229950 DC BS EN 61083-4. Instruments and software used for measurements in high-voltage and high-current tests. Part 4. Requirements for software for tests with alternating and direct currents and voltages
BS EN 61975:2010+A1:2017 High-voltage direct current (HVDC) installations. System tests
BS EN 61975:2010+A2:2022 High-voltage direct current (HVDC) installations. System tests
BS EN 61975:2010 High-voltage direct current (HVDC) installations. System tests
BS EN 60700-1:1999 Thyristor valves for high voltage direct current (HVDC) power transmission. Electrical testing
PD IEC TS 63471:2023 DC voltages for HVDC grids
BS EN 60524:1993 Direct-current resistive volt ratio boxes
BS EN 61621:1997 Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges
BS EN 60524:1979 Direct-current resistive volt ratio boxes
BS EN 60243-2:2001 Methods of test for electric strength of solid insulating materials - Additional requirements for tests using direct voltage
BS 5704:1979 Method for specifying the performance of digital electronic d. c. voltmeters and d.c. electronic analogue-to-digital convertors
BS PD IEC TR 63179-1:2020 Guideline for planning of HVDC systems-HVDC systems with line-commutated converters
BS 3026:1958 Specification. Voltages for high-voltage d.c. transmission systems

German Institute for Standardization

DIN IEC/TS 63471:2024-10*VDE V 0676-115-3471:2024-10 DC voltages for HVDC grids
DIN EN 62501:2010 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 62501:2009); German version EN 62501:2009
DIN IEC /TS 63471:2024 DC voltages for HVDC grids (IEC TS 63471:2023)
DIN IEC /TS 63471:2024-10 DC voltages for HVDC grids (IEC TS 63471:2023)
DIN VDE 0303-5:1990-07 Testing of electrical insulating materials; low voltage; high current arc resisting test
DIN EN 61083-3 E:2018-01 Draft Document - Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (IEC 42/351/CDV:2017); German version prEN 61083-3:2017
DIN EN 61083-3 E:2018 Draft Document - Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (IEC 42/351/CDV:2017); German version prEN 61083-3:2017
DIN EN 62501:2018 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 62501:2009 + A1:2014 + A2:2017); German version EN 62501:2009 + A1:2014 + A2:2017
DIN EN IEC 62501 E:2022 Draft Document - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 22F/687/CD:2022); Text in German and English
DIN EN 62501/A2 E:2016 Draft Document - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 22F/422/CD:2016)
DIN EN IEC 62501 E:2022-10 Draft Document - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 22F/687/CD:2022); Text in German and English
DIN EN 62501/A1 E:2012 Draft Document - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 22F/271/CD:2012)
DIN IEC 62501 E:2008-01 Draft Document - Electrical testing of voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission (IEC 22F/141/CD:2007)
DIN IEC 62895:2019-02*VDE 0276-2895:2019-02 High voltage direct current (HVDC) power transmission
DIN EN 62501/A2 E:2016-12 Draft Document - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 22F/422/CD:2016)
DIN EN 62501/A1 E:2012-05 Draft Document - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 22F/271/CD:2012)
DIN EN IEC 61557-5:2022-12*VDE 0413-5:2022-12 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures
DIN EN IEC 62501:2025-05 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 62501:2024); German version EN IEC 62501:2024
DIN IEC 62501 E:2008 Draft Document - Electrical testing of voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission (IEC 22F/141/CD:2007)
DIN EN 60524:1994 Direct-current resistive volt ratio boxes (IEC 60524:1975 + A1:1981); German version EN 60524:1993
DIN EN IEC 61557-2:2022-12*VDE 0413-2:2022-12 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures
DIN EN IEC 61557-7:2024-10*VDE 0413-7:2024-10 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures
DIN EN IEC 61557-11:2022-12*VDE 0413-11:2022-12 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures
DIN EN IEC 61557-12:2023-09*VDE 0413-12:2023-09 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures
DIN EN IEC 61557-3:2022-12*VDE 0413-3:2022-12 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures
DIN EN IEC 61557-4:2022-12*VDE 0413-4:2022-12 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures
DIN EN IEC 61557-17:2022-12*VDE 0413-17:2022-12 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures
DIN EN IEC 61557-1:2022-12*VDE 0413-1:2022-12 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures
DIN 41747-1:1976 Stabilized power supplies; measuring methods, power supplies with d.e. output

Bureau of Indian Standards

IS 19053-2024 DC Voltages for HVDC Grids
IS 16076-2013 High Voltage Direct Current (HDVC) Installations - Systems Tests
IS 16075-2013 Voltage Sourced Converter (VSC) Valves for High-Voltage Direct Current (HDVC) Power Transmission - Electrical Testing
IS 15638-3-2022 Instruments and Software Used for Measurement in High-Voltage and High-Current Tests Part 3 Requirements for Hardware for Tests with Alternating and Direct Voltages and Currents
IS 6767-1-1972 Direct Reading Pointer Indicator Type Ac/Dc Electronic Voltmeter - Part 1 : Methods of Measurements
IS 9320-1979 Direct Current (DC) Motor Testing Guide
IS 11212-1985 Direct current resistive volt ratio boxes

International Electrotechnical Commission (IEC)

IEC 62501:2014 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
IEC 62501:2009 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
IEC 62501:2024 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
IEC 62501:2024 CMV Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
IEC 62501/AMD1:2009 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission – Electrical testing (Edition 1.0)
IEC 62501:2009+AMD1:2014+AMD2:2017 CSV Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
IEC 61975:2010 High-voltage direct current (HVDC) installations - System tests
IEC 61975:2016 High-voltage direct current (HVDC) installations - System tests
IEC 62501:2009/AMD1:2014 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
IEC 62501:2009+AMD1:2014 CSV Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
IEC 62501:2017 Valves à convertisseur de source de tension (VSC) pour le transport d’énergie en courant continu à haute tension (CCHT) – Essais électriques (Edition 1.2; Consolidated Reprint)
IEC 61083-3:2020 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
IEC 60700-1:2015 RLV Thyristor valves for high voltage direct current (HVDC) power transmission — Part 1: Electrical testing
IEC TS 63471:2023 DC voltages for HVDC grids
IEC 60060-2:2025 RLV Measuring systems for electrical quantities - Part 2: Measurement of direct voltage, alternating voltage and lightning impulse voltages
IEC 60524:1975+AMD1:1981 CSV Direct-current resistive volt ratio boxes
IEC 60700-1:1998/AMD2:2008 Thyristor valves for high-voltage direct current (HVDC) power transmission - Part 1: Electrical testing
IEC 62501:2009/AMD2:2017 Amendment 1 - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
IEC 60700-1:2021 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
IEC 60485:1974 Digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital converters
IEC 60700-1:2008 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
IEC 61975:2022 High-voltage direct current (HVDC) installations - System tests CONSOLIDATED EDITION

Spanish Association for Standardization (UNE)

UNE-EN 62501:2009/A1:2014 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (Endorsed by AENOR in November of 2014.)
UNE-EN 62501:2009 Voltage sourced converter (VSC) valves for high-voltage direct curent (HVDC) power transmission - Electrical testing (Endorsed by AENOR in December of 2009.)
UNE-EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN 61975:2010/A2:2022 High-voltage direct current (HVDC) installations - System tests (Endorsed by Asociación Española de Normalización in January of 2023.)
UNE-EN 61975:2010 High-voltage direct current (HVDC) installations - System tests (Endorsed by AENOR in January of 2012.)
UNE-EN 60700-1:2015/A1:2021 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (Endorsed by Asociación Española de Normalización in December of 2021.)
UNE-EN 60524:1996 DIRECT-CURRENT RESISTIVE VOLT RATIO BOXES.
UNE-EN 60700-1:2015/AC:2017-02:2017 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (Endorsed by Asociación Española de Normalización in March of 2017.)
UNE-EN 60524/A2:1999 DIRECT-CURRENT RESISTIVE VOLT RATIO BOXES

Association Francaise de Normalisation

NF EN 62501:2009 Voltage Source Converter (VSC) Valves for High Voltage Direct Current (HVDC) Power Transmission - Electrical Testing
NF EN 62501/A1:2015 Voltage Source Converter (VSC) Valves for High Voltage Direct Current (HVDC) Power Transmission - Electrical Testing
NF C26-227:1992 METHODS OF TEST FOR ELECTRIC STRENGTH OF SOLID INSULATING MATERIALS. PART 2 : ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE.
NF EN 62501/A2:2017 Voltage Source Converter (VSC) Valves for High Voltage Direct Current (HVDC) Power Transmission - Electrical Testing
NF C53-701*NF EN IEC 62501:2024 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
NF EN IEC 62501:2024 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
NF C41-083-3:2021 Instruments and software used for measurement in high-voltage and high current tests - Part 3 : requirements for hardware for tests with alternating and direct voltages and currents
NF C53-975/A2*NF EN IEC 61975/A2:2022 High-voltage direct current (HVDC) installations - System tests
NF C53-225:1985 Testing of semiconductor valves for high-voltage D.C. Power transmission.
NF C53-701/A2*NF EN 62501/A2:2017 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
NF EN 61975/A1:2017 High Voltage Direct Current (HVDC) Installations - System Testing
NF C53-975/A1*NF EN 61975/A1:2017 High-voltage direct current (HVDC) installations - System tests
NF EN IEC 61083-3:2021 Equipment and software used for measurements during high voltage and high current tests - Part 3: Equipment requirements during tests with alternating and direct voltages and currents
NF EN 61975:2013 High Voltage Direct Current (HVDC) Installations - System Testing
NF EN IEC 61975/A2:2022 High Voltage Direct Current (HVDC) Installations - System Testing
NF C53-243*NF EN 61803:2000 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters
NF C53-243*NF EN IEC 61803:2020 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters
NF EN 61621:1998 Dry Solid Insulating Materials - High Voltage, Low Current Arc Discharge Resistance Test
NF C53-701*NF EN 62501:2009 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
NF EN 60700-1:2015 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical tests
NF C53-701/A1*NF EN 62501/A1:2015 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
NF C13-936-2*NF EN IEC 61936-2:2023 Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2 : DC
NF C53-700-1/A1*NF EN 60700-1/A1:2021 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1 : electrical testing
NF EN 60700-1/A1:2021 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical tests
NF C53-700-1*NF EN 60700-1:2015 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1 : electrical testing
NF C53-700-1/A2:2009 Thyristor valves for high-voltage direct current (HVDC) power transmission - Part 1 : electrical testing.
NF EN IEC 61936-2:2023 Electrical installations with voltages greater than 1 kV in alternating current and 1.5 kV in direct current - Part 2: direct current
NF C42-161*NF EN 60524:1993 Direct-current resistive volt ratio boxes.

Danish Standards Foundation

DANSK DS/EN 62501:2009 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
DANSK DS/EN 62501/A2:2009 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
DANSK DS/EN IEC 62501:2024 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission – Electrical testing
DANSK DS/EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests – Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
DS/EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests – Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
DS/EN 62501:2009 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
DS/EN 61975:2010 High-voltage direct current (HVDC) installations - System tests
DANSK DS/EN 61975/A2:2010 High-voltage direct current (HVDC) installations - System tests
DANSK DS/EN 61975:2010 High-voltage direct current (HVDC) installations - System tests
DS/EN 60524+A2:1998 Direct-current resistive volt ratio boxes
DS/EN 60700-1/A1:2003 Thyristor valves for high-voltage direct current (HVDC) power transmission - Part 1: Electrical testing
DS/EN 60700-1:2021 Thyristor valves for high voltage direct current (HVDC) power transmission – Part 1: Electrical testing
DS/EN 60700-1/A2:2009 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
DS/EN 60700-1:1999 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

European Committee for Electrotechnical Standardization（CENELEC）

EN 62501:2009 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (Incorporates Amendment A1: 2014)
EN IEC 62501:2024 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
EN 61975:2010/A1:2017 High-voltage direct current (HVDC) installations - System tests
EN 61975:2010 High-voltage direct current (HVDC) installations - System tests
EN IEC 61462:2023 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V - Definitions, test methods, acceptance criteria and design recomme...

Comitato Elettrotecnico Italiano

CEI EN 62501:2010 Voltage sourced converter (VSC) valves for high-voltage direct curent (HVDC) power transmission - Electrical testing
CEI EN 62501/A2:2010 Voltage sourced converter (VSC) valves for high-voltage direct curent (HVDC) power transmission - Electrical testing
CEI EN IEC 62501:2024 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
CEI EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and highcurrent tests Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
CEI EN 61975:2013 High-voltage direct current (HVDC) installations - System tests
CEI EN 61975/A2:2013 High-voltage direct current (HVDC) installations - System tests
CEI EN 60700-1/A1:2016 Thyristor valves for high voltage direct current (HVDC) power transmission Part 1: Electrical testing
CEI EN 60700-1:2016 Thyristor valves for high voltage direct current (HVDC) power transmission Part 1: Electrical testing
CEI EN 61621:1998 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
CEI EN IEC 61936-2:2024 Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC

Swedish Institute for Standards

SS-EN IEC 62501:2025 CMV:2025 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission – Electrical testing
SS-EN 62501:2010 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
SS-EN IEC 62501:2025 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission – Electrical testing
SS-EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
SIS SS IEC 700:1984 Power electronics — Semiconductor valves for high-voltage d.c. power transmission — Testing
SS-EN 61975:2011 High-voltage direct current (HVDC) installations - System tests
SIS SS IEC 524:1982 Electrical measuring instruments — Direct current resistive volt ratio boxes
SIS SS IEC 523:1982 Electrical measuring instruments — Direct current potentiometers
SIS SS 428 91 06-1982 Portable two-pole voltage testers for 110-440 V a.c. and de. - Design and testing
SS-EN 60700-1:2015 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
SS-EN 60524:1998 Direct-current resistive volt ratio boxes

Yugoslav Association for Standardization

JUS N.C0.041-1984 Testing ofcables and flexible cords. Resistance to direct voltage

Korean Agency for Technology and Standards (KATS)

KS C IEC 62501:2020 Voltage sourced converter(VSC) valves for high-voltage direct current(HVDC) power transmission — Electrical testing
KS C IEC 62501-2020 Voltage sourced converter(VSC) valves for high-voltage direct current(HVDC) power transmission — Electrical testing
KS C IEC 62501-2020(2025) Voltage sourced converter(VSC) valves for high-voltage direct current(HVDC) power transmission — Electrical testing
KS C IEC 61083-3-2025 Instruments and software used for measurement in high-voltage and high‑current tests — Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
KS A 4031-1995 Stabilized D.C.high voltage suppliers for radiation detection instruments
KS C IEC 60524-2023 Direct-current resistive volt ratio boxes
KS C IEC 60524:2013 Direct-current resistive volt ratio boxes
KS C IEC 60524-2013(2018) Direct-current resistive volt ratio boxes

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 61083-3:2023 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
BH GSO IEC 60700-1:2024 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
BH GSO IEC 61621:2016 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges

GCC Standardization Organization

GSO IEC 61083-3:2023 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
GSO IEC 61621:2015 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
GSO IEC 60700-1:2024 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

Czech Standards Institute (UNMZ)

CSN 35 8744-1964 Transistore. Measurement of d. c. currents and voltages
CSN 34 6467-1986 Test method for determination of resistance of insulating materials to low-voltage, high-current d.c. arc
CSN 50 0452-1988 Condenser páper. Determination of breakdown voltage at alternating (50 Hz) and direct voltage
CSN 35 8735-1964 Semiconductor diodes. Measurement of d. c. currents and voltages
CSN 35 0101-1987 Electric rotating machines. Test code for direct current machines

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 400-1980 Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the Field
IEEE 400.5-2021 IEEE Guide for Field Testing of DC Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Test Voltages
IEEE Std 400.5-2021 IEEE Guide for Field Testing of DC Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Test Voltages
IEEE P400.5/D15, April 2021 IEEE Draft Guide for Field Testing of Shielded DC Power Cable Systems Using High Voltage Direct Current (HVDC)
IEEE P400.5/D16, September 2021 IEEE Draft Guide for Field Testing of Shielded DC Power Cable Systems Using High Voltage Direct Current (HVDC)
IEEE P400.5/D17, September 2021 IEEE Approved Draft Guide for Field Testing of Shielded DC Power Cable Systems Using High Voltage Direct Current (HVDC)
IEEE Std 95-2002 IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage
IEEE Std 95-2002(R2007) IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage
AIEE Std No. 802 Proposed Test Code for Direct-Current Carbon-Pile Voltage Regulators for Aircraft
ANSI/IEEE Std 95-1977 IEEE Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Direct Voltage
ANSI/IEEE Std 400-1980 IEEE Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the Field
IEEE Std 113-1985 Testing DC Motors Procedure Guide
IEEE 400-1991 Guide for making high-direct-voltage tests on power cable systems in the field

Canadian Standards Association (CSA)

CAN/CSA-C381.1-2008(R2013) Test method for calculating the energy efficiency of single-voltage external ac-dc and ac-ac power supplies
CSA C381.1-08-2008 Test method for calculating the energy efficiency of single-voltage external ac-dc and ac-ac power supplies First Edition

Polski Komitet Normalizacyjny (PKN)

PN-EN IEC 61083-3-2021-08 E Instruments and software used for measurement in high-voltage and high-current tests -- Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (IEC 61083-3:2020)
PN E06204-1993 Test methods for direct arc furnaces
PN E06512-1989 D.c.volt resistive ratio boxes General requirements and tests

United States Navy

NAVY MS18098-1963 VOLT-AMMETER, DUAL POINTER, DIRECT CURRENT
NAVY MS18098 VALID NOTICE 1-1988 VOLT-AMMETER, DUAL POINTER, DIRECT CURRENT
NAVY MS18098 NOTICE 2-1996 VOLT-AMMETER, DUAL POINTER, DIRECT CURRENT
NAVY MIL-V-5622 A NOTICE 1-1996 VOLT-AMMETER: DUAL POINTER DIRECT CURRENT
NAVY MIL-V-5622 A-1963 VOLT-AMMETER: DUAL POINTER DIRECT CURRENT
NAVY MIL-A-6752 A REINST NOTICE 2-1978 AMMETERS, VOLTMETERS, AND LOADMETERS; DIRECT CURRENT
NAVY MIL-A-6752 A-1953 AMMETERS, VOLTMETERS, AND LOADMETERS; DIRECT CURRENT
NAVY MIL-A-6752 A (3)-1958 AMMETERS, VOLTMETERS, AND LOADMETERS; DIRECT CURRENT
NAVY QPL-6752-2011 Ammeters, Voltmeters, and Loadmeters; Direct Current
NAVY QPL-6752-2012 Ammeters, Voltmeters, and Loadmeters; Direct Current

Lithuanian Standards Office

LST EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (IEC 61083-3:2020)
LST EN 62501-2009 Voltage sourced converter (VSC) valves for high-voltage direct curent (HVDC) power transmission - Electrical testing (IEC 62501:2009)
LST EN 61975-2011 High-voltage direct current (HVDC) installations - System tests (IEC 61975:2010)

Indonesia Standards

SNI IEC 61975:2012 High-voltage direct current (HVDC) installation - System test

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 61975:2014 High-voltage direct current (HVDC) installations - System tests

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.6.26A-2014 DC Current Induced Thermal Cycling Test

Magyar Szabványügyi Testület

MSZ 4822/5-1973 Power stability testing of high-voltage equipment. DC voltage detection
MNOSZ 4-1953 Railway DC voltage

U.S. Air Force

AIR FORCE A-A-59930-2013 VOLTAGE STANDARD, DC

The Institution of Engineering and Technology (IET)

HGIH VOLT DIR CURR TRANS-1998 High Voltage Direct Current Transmission

Ente Nazionale Italiano di Unificazione

UNI EN 1267:2001 Valves - Test of flow resistance using water as test fluid

European Committee for Standardization (CEN)

HD 614 S1-1992 Direct-current resistive volt ratio boxes (IEC 524:1975 + A1:1981)
prEN 60524-1992 Direct-current resistive volt ratio boxes (IEC 524:1975 + A1:1981)

National Standardisation Body (ASRO)

STAS 3184/2-1985 PLUGS, SOCKET-OUTLETS'AND COU- PLERS FOR ELECTRIC WIRINGS UP TO 380 V ALTERNAT1NG CURRENT, AND 250 V DIRECT CURRENT AND UP TO 25 A Rules and test methods

South African Bureau of Standard

SANS 61204-6:2000 Low-voltage power supplies, d.c. output Part 6: Requirements for low-voltage power supplies of assessed performance

Defense Logistics Agency

DLA MIL-DTL-26126 C-2002 RELAYS, ELECTRICAL, OVERVOLTAGE, DC, GENERAL SPECIFICATION FOR

Belgian Standards Institute

NBN-EN 60524-1994 Direct-current resistive volt ratio boxes

Others: DC voltage drop test,Test method for breakdown voltage,DC withstand voltage test