Gas composition analysis method
Gas composition analysis method, Total:436 items.
The international standard classification for "Gas composition analysis method" includes: Chemical analysis , Extraction and processing of petroleum and natural gas , Aromatic hydrocarbons , Gases for industrial application , Analytical chemistry in general , Natural gas , Ferroalloys , Aluminium and aluminium alloys , Gaseous fuels , Metalliferous minerals , Analytical chemistry , Ferrous metals , Measurement of electrical and magnetic quantities , Measurement of volume, mass, density, viscosity , Fishing and fish breeding , Other equipment for petroleum and natural gas industries , Petroleum products in general , Ignitability and burning behaviour of materials and products , Cement. Gypsum. Lime. Mortar , Other standards related to analytical chemistry , Farming and forestry , Iron and steel products , Physicochemical methods of analysis .
The Chinese standard classification for "Gas composition analysis method" includes: Industrial gas and chemical gas , Natural gas , General organic chemicals , Electrochemical, thermochemistry and optical profile type analyzer , Petroleum development , Heat supply, air supply, air conditioning and refrigerating engineering in general , Steel and iron alloy analysis method , Light metals and their alloys analysis method , Special electronic technology material , Iron ore , Material composition analysis instrument and environment detection instrument in general , Optical instrument in general , Petroleum exploration, development, gathering and transportation engineering in general , Petroleum products in general , Petroleum and natural gas in general , Fire-fighting in general , Binding material , Electrician alloy parts , Basic standard and general method on forestry , Mass spectrometer, liquid spectrometer, energy spectrometer and combined devices of them , Technical Management , Spacecraft power system .
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
- GB/T 35212.1-2017 Analysis and evaluation methods of gas and solution and desulfurization decarbonization and sulfur recovery for natural gas treating plant-Part 1:Gas and solution analysis
- GB/T 35212.2-2017 Analysis and evaluation methods of gas and solution and desulfurization decarbonization and sulfur recovery for natural gas treating plant―Part 2:Analysis of alkanolamine desulfurization decarbonization solvent
- GB/T 33360-2016 Gas analysis―Guidelines for purification of gases for trace analysis instrument
- GB/T 33347-2016 Reciprocating internal combustion gas generating set- Classification and constituent analysis of gas fuels
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB 6730.50-1986 Methods for chemical analysis of iron ores - The gas volumetric method for the determination of total carbon content
- GB/T 10248-2005 Gas analysis—Preparation of calibration gas mixtures—Static volumetric methods
- GB/T 25924-2010 Test methods of on-line gas analyzers
- GB/T 5275-2005 Gas analysis-Preparation of calibration gas mixtures-Permeation method
- GB/T 26981-2011 Test method for reservoir fluid physical properties
- GB/T 43362-2023 Gas analysis—Gas chromatography with micro-cell thermal conductivity detector
- GB/T 5274-2008 Gas analysis - Preparation of calibration gas mixture - Gravimetric method
- GB/T 25930-2010 Test method of infrared gas analyzers
- GB/T 10410.1-1989 Analysis of manufactured gas composition by gas chromatography
- GB/T 10628-2008 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- GB/T 3169.6-1982 Chemical analysis of aluminum powder--The gasometric method for determination of grease
- GB 10628-1989 Gas analysis-Determination of composition of calibration gas mixtures?Comparison methods
- GB/T 8705.2-1988 Methods for chemical analysis of ferrophosphorus--The gasometric method for the determination of carbon content
- GB/T 5275-1985 Gas analysis--Preparation of calibration gas mixtures--Permeation method
- GB/T 13610-2014 Analysis of natural gas by gas chromatography
- GB/T 10248-1988 Gas analysis--Preparation of calibration gas mixtures--Static volumetric methods
- GB/T 10628-1989 Gas analysis--Determination of composition of calibration gas mixtures—Comparison methods
- GB/T 28726-2012 Gas analysis—Gas chromatograph with helium ionization detector
- GB/T 5686.6-1988 Methods for chemical analysis of silicomanganese alloy; The gasometric method for the determination of carbon content
- GB/T 3169.1-1982 Chemical analysis of aluminum powder--The gasometric method for determination of active aluminum
- GB/T 3653.2-1983 Methods for chemical analysis of ferroboron--The gasometric method for the determination of carbon content
- GB/T 5275.8-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 8:Diffusion method
- GB/T 14850-1993 Gas analysis-Vocabulary
- GB/T 13610-2003 Analysis of natural gas by gas chromatography
- GB/T 6730.50-1986 Methods for chemical analysis of iron ores--The gas volumetric method for the determination of total carbon content
- GB/T 5274-1985 Gas analysis--Preparation of calibration gas mixtures--Weighing methods
- GB/T 10410-2008 Analysis of manufactured gas and liquefied petroleum gas normal composition by gas chromatography
- GB/T 5275.9-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 9:Saturation method
- GB/T 13610-2014(俄语版) Compositional Analysis of Natural Gas by Gas Chromatography
- GB/T 10410.2-1989 Analysis of natural gas normal composition by gas chromatography
- GB/T 28901-2012 Analysis of coke-oven gas composition by gas chromatography
- GB/T 14850-2008 Gas analysis - Vocabulary
- GB/T 13610-2014e Analysis of natural gas composition—Gas chromatography
- GB/T 14070-1993 analysis-Preparation of calibration gas mixtures - Manometric method
- GB/T 5275.10-2009 Gas analysis—Preparation of calibration gas mixtures using dynamic volumetric methods—Part 10:Permeation method
- GB/T 10410.3-1989 Analysis of liquefied petroleum gas composition by gas chromatography
- GB/T 12205-1990 Chemical analysis method for main composition of manufactured fuel gas
- GB/T 5275.4-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 4:Continuous syringe injection method
- GB/T 25494-2010 Test methods for composition analysis of getters
- GB/T 32757-2016 Molluscs karyotype analysis
- GB/T 5275.1-2014 Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 1:Methods of calibration
国家能源局
- SY/T 7315-2016 Comprehensive two-dimensional gas chromatography component analysis method for condensate oil
- SY/T 7361-2017 Quadrupole mass spectrometry for rare gas separation and component content analysis
- SY/T 6679.4-2016 Calibration method of mud-logging unit-Part 4:Infrared gas analyzer
Professional Standard - Petroleum
- SY/T 6537-2016 Analysis methods of gas and solution for natural gas treating plant
- SY/T 6434-2000 Analysis for natural gas reservoir fluids physical properties
- SY/T 5523-2000 Analysis for oil and gas field water
- SY/T 0542-2008 Components of natural gasoline analysis-Gas chromatography method
- SY/T 5542-2009 Test method for reservoir fluid physical properties
- SY/T 6537-2002 Analysis methods of gas and solution for natural gas treating plant
- SY 0542-2008 Gas Chromatography for Analysis of Young Stable Light Hydrocarbon Components
- SY/T 5543-2002 Analytical method for condensate gas properties
- SY/T 5119-1995 Tomographic Analysis Method of Rock Soluble Organisms and Crude Group Components
- SY/T 0529-1993 Component analysis for C1~C12 in oil field gas - Relevant unification - Gas chromatography method
- SY/T 0542-1994 Gas Chromatography for the Analysis of Stable Light Hydrocarbon Components
能源
- NB/T 10020-2015 Method of sampling and component analysis on coalbed methane
- NB/T 10019-2015 Experimental method of multicomponent gas isothermal adsorption on coal
国家市场监督管理总局、中国国家标准化管理委员会
- GB/T 38309-2019 Toxicity testing of fire effluents -- Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
- GB/T 36141-2018 Methods for phase composition analysis of calcined gypsum
- GB/T 37182-2018 Gas analysis--Gas chromatograph with plasma emission detector
- GB/T 39540-2020 Fast determination of shale gas composition—Laser Raman spectroscopy
- GB/T 37847-2019 General rules for isotope composition analysis by mass spectrometry
- GB/T 26981-2020 Analysis method for reservoir fluid physical properties
- GB/T 40870-2021 Gas analysis—Conversion of gas mixture composition data
- GB/T 13610-2020 Analysis of natural gas composition—Gas chromatography
- GB/T 14850-2020 Gas analysis—Vocabulary
Professional Standard - Machinery
- JB/T 9359.2-1999 Test method of infrared gas analyzers
- JB/T 8279-1999 Test method of industry gas analyzers
- JB/T 9548.2-1999 Methods for chemical analysis of iron-chromium-aluminium alloys The gas-volumetric method for the determination of carbon content
Sichuan Provincial Standard of the People's Republic of China
- DB51/T 1926-2014 On-site detection method for natural gas component analysis
国家林业和草原局
- LY/T 3157-2019 Test methods of oleoresin
Professional Standard - Education
- JY/T 018-1996 General rules for liquid scintillation analysis
- JY/T 0574-2020 General rules of analytical methods for gas chromatography
Professional Standard - Ferrous Metallurgy
- YB/T 5340-2006 Methods for chemical analysis of ferrophorus The gasometric method for the determination of carbon content
Professional Standard - Electron
- SJ 3239-1989 General requirement for gas chromatography analysis method
Group Standards of the People's Republic of China
- T/CEC 552-2021 Spectral detection method of sulfur hexafluoride gas components
- T/HNNMIA 52-2023 Chemical analysis methods of aluminium ash - Determination of aluminium content - Gas volumetric method
Professional Standard - Electricity
- DL/T 1359-2014 The Method for Analysis and Judgement of SF6 Mal-function Gas in Electrical Equipment
中国石油天然气总公司
- SY/T 6015-1994 Oil and gas display analyzer rock pyrolysis analysis method
Taiwan Provincial Standard of the People's Republic of China
- CNS 14949-2005 Method of test for the determination of individual components in spark ignition engine fuels by 100 metre capillary (with precolumn) high-resolution gas chromatography
Professional Standard - Aviation
- HB 5220.2-2008 Methods for Chemical Analysis of Superalloys - Part 2: Determination of Carbon Content by Gasometric Method
- HB 5220.2-1995 Method for Chemical Analysis of Superalloys - Determination of Carbon Content by Gas Volumetric Method
Professional Standard - Aerospace
- QJ 2838.2-1996 Analysis Method for Methyl Hydrazine Purity and Water - Gas Chromatography Method for Water Analysis (External Standard Method)
Professional Standard - Geology
- DZ 50-1987 Analysis methods of crude oil and organic extracts
Professional Standard - Building Materials
- JC/T 2149-2012 Method for constitution analysis of high purity silicon carbide
Association Francaise de Normalisation
- NF X20-377:1980 Gas Analysis - Methods for analyzing oxygen based on the paramagnetic properties of this gas
- NF X20-350:1979 Gas analysis. Sulfur dioxide analysis. Guide for the choice of the analysis methods.
- NF X20-380:1979 Gas analysis. Carbon dioxide analysis. Guide for the choice of the analysis methods.
- NF X20-378:1979 Gas analysis. Oxygen analysis. Electrochemical method with solid electrolyte.
- NF B54-173:1995 Plywood. Forlamdehyde release classes determined by the gas analysis method.
- NF X70-100-1:2006 Fire behavior tests - Analysis of gaseous effluents - Part 1: methods of analysis of gases originating from thermal degradation
- NF X20-303:1974 GAS ANALYSIS BY MEANS OF GAS CHROMATOGRAPHY.
- NF X20-207*NF EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- NF X20-307:1977 Gas analysis by colorimetry.
- NF EN ISO 6143:2006 Gas analysis - Comparative methods for determining and verifying the composition of gas mixtures for calibration
- NF X20-212:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 1 : methods of calibration.
- NF X20-205-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1 : methods of calibration.
- NF X20-501:1985 Gas analysis. Analysis of natural gas without condensate. Method by gas chromatography.
- NF X20-379:1979 Gas analysis. Oxygen analysis. Electrochemical methods with liquid or gelled electrolyte.
- NF V09-022:1995 Sensory analysis. Methodology. Texture profile.
- X20-377:1980 Gas analysis. METHODS2OF analysis of oxygen based on the paramagnetic properties of this gas.
- NF X20-207:1982 Gas analysis. Determination of composition of calibration gas mixtures. Comparison methods.
- NF X20-304:1974 GAS ANALYSIS BY A CONTINUOUS COULOMETRIC METHOD.
- NF EN ISO 6145-1:2019 Gas analysis - Preparation of gas mixtures for calibration using dynamic methods - Part 1: general aspects
- NF X20-202:1979 Gas analysis. Preparation of calibration gas mixtures. Gravimetric methods.
- NF X20-208:1979 GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. SATURATION METHOD.
- NF X20-205-6*NF EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6 : critical flow orifices
- NF ISO 12963:2017 Gas analysis - Comparison methods for determining the composition of gas mixtures based on one or two calibration points
- NF X65-040-2*NF ISO 12828-2:2020 Validation method for fire gas analysis - Part 2 : Intralaboratory validation of quantification methods
- NF X43-640*NF ISO 7504:2015 Gas analysis - Vocabulary
- NF X20-105*NF ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
- NF X43-640:2002 Gas analysis - Vocabulary.
- NF X20-204:1974 Gas analysis. Method for the dynamic preparation of gas mixtures for calibration by proportioning piston pumps.
- NF X20-209:1979 Gas analysis. Preparation of calibration gas mixtures. Permeation method.
- NF X20-542:2006 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method.
- NF EN ISO 6142-1:2015 Gas analysis - Preparation of gas mixtures for calibration - Part 1: gravimetric method for Class I mixtures
- NF X20-101:1984 Gas analysis. Vocabulary.
- NF ISO 7504:2015 Analyse des gaz - Vocabulaire
- NF X20-251:1982 Analysis of gases. Devices for the sampling of gases and their transfer to an analytical unit.
- NF X20-363:1978 GAS ANALYSIS. DETERMINATION OF CARBON MONOXIDE BY MEANS OF GAS CHROMATOGRAPHY.
- NF EN ISO 12460-3:2020 Wood-based panels - Determination of formaldehyde release - Part 3: gas analysis method
- NF ISO 6142-2:2024 Gas analysis - Preparation of gas mixtures for calibration - Part 2: gravimetric method for Class II mixtures
- NF X20-305:1975 Gas analysis by electrical conductimetry.
- NF X20-206:1979 GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. MANOMETRIC METHOD.
- NF X20-105/A1*NF ISO 12963/A1:2021 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - AMENDMENT 1 : correction to Formula 5
- NF X20-203*NF EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method.
- NF C46-251-7*NF EN 61207-7:2014 Expression of performance of gas analyzers - Part 7 : tunable semiconductor laser gas analyzers
TR-TSE
- TS 2281-1976 NATUBAL GAS ANALYSI? (GAS CHROMATOGRAPHY METHOD)
SCC
- BS 3156-11.1.2:1997 Analysis of fuel gases. Methods for non-manufactured gases. Hydrocarbons and inert gases. Extended analysis by gas chromatographic method
- BS 3156-3:1968 Methods for the analysis of fuel gases.-Combustion characteristics
- BS 3156:1959 Methods for the sampling and analysis of fuel gases
- AENOR UNE 77241:2001 Gas analysis. Verification of calibration gas mixtures by a comparison method.
- DANSK DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- BS ISO 6143:2001 Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
- DIN 6146 E:2017 Draft Document - Gas analysis - Preparation of calibration gas mixtures - Manometric method
- BS 3156-5:1969 Analysis of fuel gases-Techniques for high pressure gases
- NS-EN ISO 6142:2006 Gas analysis — Preparation of calibration gas mixtures — Gravimetric method (ISO 6142:2001)
- DANSK DS/ISO 6145-1:2019 Gas analysis – Preparation of calibration gas mixtures using dynamic methods – Part 1: General aspects
- BS 1756-4:1965 Methods for sampling and analysis of flue gases. Miscellaneous analyses
- BS ISO 6145-1:2003 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
- DANSK DS/ISO 7404-3:2009 Methods for the petrographic analysis of coals - Part 3: Method of determining maceral group composition
- BS 3156-4:1969 Analysis of fuel gases-Gas chromatographic analysis
- BS 1756-2:1963 Methods for the sampling and analysis of flue gases. Analysis by the Orsat apparatus
- DIN 51894 E:2011 Draft Document - Gas analysis - Gas chromatographic method for fuel gases/natural gas and other gas mixtures
- BS 1756-5:1963 Methods for sampling and analysis of flue gases. Semi-routine analyses
- NS-EN ISO 6143:2006 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
- BS 3156-1:1968 Analysis of fuel gases-General analysis
- BS 1756-5:1971 Methods for sampling and analysis of flue gases-Semi-routine analyses
- BS 1756-2:1971 Methods for the sampling and analysis of flue gases-Analysis by the Orsat apparatus
- DIN EN ISO 6142-1 E:2014 Draft Document - Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO/DIS 6142:2014); German version prEN ISO 6142:2014
- BS 1756-3:1971 Methods for the sampling and analysis of flue gases-Analysis by the Haldane apparatus
- BS 3156-11.2.2:1986 Analysis of fuel gases. Methods for non-manufactured gases. Determination of potential hydrocarbon liquid content-Weighing method
- BS 1756-1:1963 Methods for the sampling and analysis of flue gases. Methods of sampling
- VDI 3490 BLATT 4-1980 Measuring gases; test gases; production using gravimetric methods
- DANSK DS/EN ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
- BS ISO 7504:2001 Gas analysis. Vocabulary
- SN-CEN/TR 17421:2019 Animal feeding stuffs: Methods of sampling and analysis — Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis
- DANSK DS/EN ISO 6145-1:2019 Gas analysis – Preparation of calibration gas mixtures using dynamic methods – Part 1: General aspects (ISO 6145-1:2019)
- AENOR UNE 77242:2004 Gas analysis. Vocabulary.
- DANSK DS/CEN/TR 17421:2019 Animal feeding stuffs: Methods of sampling and analysis – Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis
- NS-EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
- AENOR UNE-ISO 7504:2016 Gas analysis. Vocabulary.
- BS ISO 6142:2001 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
- DANSK DS/IEC/TR 62725:2013 Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems
- BS 1756-1:1971 Methods for the sampling and analysis of flue gases-Methods of sampling
- BS 3156-11.1.2:1987 Analysis of fuel gases. Methods for non-manufactured gases. Hydrocarbons and inert gases-Determination of hydrocarbons from butane (C<sub>4</sub>) to hexadecane (C<sub>16</sub>) by gas chromatography
- DIN EN ISO 6143 E:2023 Draft Document - Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO/DIS 6143:2023); German and English version prEN ISO 6143:2023
- DANSK DS/ISO 12460-3:2020 Wood-based panels – Determination of formaldehyde release – Part 3: Gas analysis method
- VDI 3822 BLATT 2.2.10-2019 Damage analysis - Important instrumental analysis methods for damage analysis on elastomer products
- BS 3156-11.4.1:1994 Analysis of fuel gases. Methods for non-manufactured gases. Determination of sulfur compounds in natural gas-Introduction
- AENOR UNE 77248:2003 Gas analysis. Preparation of gas mixtures for calibration. Saturation method.
- BS 7276:1990 Method for gas chromatographic analysis of liquefied petroleum gas
- DIN 51893 E:2012 Draft Document - Gas analysis - Requirements for specifications of analysers/analytical equipment
- AWS F1.5-1996 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
- AENOR UNE 77238:1999 Gas analysis. Preparation of gas mixtures for calibration. Permeation method.
- DANSK DS/ISO 12828-1:2012 Validation method for fire gas analysis - Part 1: Limits of detection and quantification
- CEI EN 61207-7:2014 Expression of performance of gas analyzers Part 7: Tunable semiconductor laser gas analyzers
Korean Agency for Technology and Standards (KATS)
- KS I ISO 6143-2015(2020) Gas analysis-Comparison methods for determining and checking the composition of calibration gas mixtures
- KS I 2219-2020 General rules for calibration method of gas analyzer
- KS I 2219-2015 General rules for calibration method of gas analyzer
- KS I 2219-2009 General rules for calibration method of gas analyzer
- KS B 0824-1974 METHOD OF GASEOUS CORROSION TEST FOR CHEMICAL ANALYSIS
- KS I ISO 24094-2010(2016) Analysis of natural gas-Validation methods for gaseous reference materials
- KS I 2219-2015(2020) General rules for calibration method of gas analyzer
- KS I ISO 24094-2010(2021) Analysis of natural gas-Validation methods for gaseous reference materials
- KS I ISO 6143-2020 Gas analysis-Comparison methods for determining and checking the composition of calibration gas mixtures
- KS I ISO 6143:2008 Gas analysis-Comparison methods for determining and checking the composition of calibration gas mixtures
- KS I ISO 6145-1:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 1:Methods of calibration
- KS I ISO 6143:2015 Gas analysis-Comparison methods for determining and checking the composition of calibration gas mixtures
- KS M 3047-2023 Methods for the analysis of evolved gases concentration by burning of plastics
- KS I ISO 6145-1:2015 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 1:Methods of calibration
- KS I ISO 6145-1-2020 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 1:Methods of calibration
- KS I ISO 6145-1-2015(2020) Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 1:Methods of calibration
- KS M 2098-2004(2009) Methods for determination of ammonia in exhaust gas
- KS M ISO 6147:2008 Gas analysis-Preparation of calibration gas mixtures-Saturation method
- KS I 2210-2011 Methods for determination of bromine in exhaust gas
- KS M ISO 6147:2003 Gas analysis-Preparation of calibration gas mixtures-Saturation method
- KS I ISO 6142-2015(2020) Gas analysis-Preparation of calibration gas mixtures-Gravimetric method
- KS Q ISO 11036:2003 Sensory analysis-Methodology-Texture profile
- KS I 2214-2011 Methods for determination of mercury in stack gas
- KS I ISO 7504:2008 Gas analysis-Vocabulary
- KS M ISO 6147-2008 Gas analysis-Preparation of calibration gas mixtures-Saturation method
- KS I 2201-2011 Methods for determination of pyridine in exhaust gas
- KS I 2211-2011 Methods for determination of benzene in flue gas
- KS I ISO 7504-2015(2020) Gas analysis-Vocabulary
- KS I ISO 6142:2015 Gas analysis-Preparation of calibration gas mixtures-Gravimetric method
- KS I ISO 6142-2020 Gas analysis-Preparation of calibration gas mixtures-Gravimetric method
- KS I ISO 7504-2020 Gas analysis-Vocabulary
- KS I ISO 6142:2008 Gas analysis-Preparation of calibration gas mixtures-Gravimetric method
- KS M 2103-2004(2009) Analytical methods for determination of hydrogen sulfide in exhaust gas
- KS M 2103-1980 Analytical methods for determination of hydrogen sulfide in exhaust gas
- KS I 2205-2011 Methods for determination of mercaptan in exhaust gas
- KS I 2213-2010 Method for determination of metals in flue gas
- KS C IEC/TR 62725-2022 Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems
- KS C IEC/TR 62725:2017 Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems
- KS I ISO 6144-2015(2020) Gas analysis-Preparation of calibration gas mixtures-Static volumetric method
- KS E ISO 7404-3-2023 Methods for the petrographic analysis of bituminous coal and anthracite Part 3: Method of determining maceral group composition
- KS A ISO 7589:2007 Photography-Illuminants for sensitometry-Specifications for daylight, incandescent tungsten and printer
- KS I ISO 6145-10:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
- KS M 1995-2009 Determination of organic compounds emitted from plastics-Gas chromatographic method
- KS I ISO 6145-9:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
- KS M 1810-2008 Analysis method for determination of lead and cadmium in resistance
International Organization for Standardization (ISO)
- ISO/CD TS 12828-3:2024 Validation method for fire gas analysis
- ISO 6143:1981 Gas analysis; Determination of composition of calibration gas mixtures; Comparison methods
- ISO/CD 6143 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
- ISO 6145-1:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
- ISO 6143:2001 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- ISO/DIS 6143:2023 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
- ISO 6142:2001/Amd 1:2009 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method; Amendment 1: Liquid introduction
- ISO 6145-1:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 1 : Methods of calibration
- ISO 6142:1981/Add 1:1983 Gas analysis — Preparation of calibration gas mixtures — Weighing methods — Addendum 1
- ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
- ISO 12460-3:2020 Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method
- ISO 11036:1994 Sensor analysis - Methodology - Texture profile
- ISO/FDIS 6142-2:2023 Gas analysis — Preparation of calibration gas mixtures — Part 2: Gravimetric method for Class II mixtures
- ISO 6142-2:2023 Gas analysis — Preparation of calibration gas mixtures — Part 2: Gravimetric method for Class II mixtures
- ISO 6142:1981 Gas analysis; Preparation of calibration gas mixtures; Weighing methods
- ISO 6142:2001 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
- ISO 7504:2001 Gas analysis - Vocabulary
- ISO 6146:1979 Gas analysis — Preparation of calibration gas mixtures — Manometric method
- ISO 6142-2:2024 Gas analysis — Preparation of calibration gas mixtures — Part 2: Gravimetric method for Class II mixtures
- ISO 6147:1979 Gas analysis; Preparation of calibration gas mixtures; Saturation method
- ISO 6711:1981 Gas analysis — Checking of calibration gas mixtures by a comparison method
- ISO/FDIS 12460-3:2023 Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method
- ISO 6349:1979 Gas analysis — Preparation of calibration gas mixtures — Permeation method
- ISO 7504:2015 Gas analysis - Vocabulary
- ISO 7589:2002 Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer
- ISO 12460-3:2023 Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method
- ISO 6712:1982 Gas analysis — Sampling and transfer equipment for gases supplying an analytical unit
- ISO 12828-2:2016 Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods
- ISO/CD 14912 Gas analysis — Conversion of gas mixture composition data
- ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
BE-NBN
- NBN T 97-109-1984 Gas analysis - Determination of composition of calibration gas mixtures -Comparison methods
- NBN T 97-203-1982 Natural gas - Simple analysis by gas chromatography
British Standards Institution (BSI)
- BS 1756-4:1977 Methods for sampling and analysis of flue gases - Miscellaneous analyses
- BS EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Methods of calibration
- BS EN ISO 6145-1:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
- BS EN ISO 6143:2006(2007) Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
- BS EN ISO 6145-1:2019 Gas analysis. Preparation of calibration gas mixtures using dynamic methods - General aspects
- BS ISO 12963:2017+A1:2020 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
- BS ISO 12963:2017 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
- BS 3156-11.5:1996 Analysis of fuel gases - Methods for non-manufactured gases - Performance evaluation for on-line analytical systems
- BS ISO 6142-2:2024 Gas analysis. Preparation of calibration gas mixtures - Gravimetric method for Class II mixtures
- BS EN ISO 6142-1:2015 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method for Class I mixtures
- BS ISO 6142-1:2015+A1:2020 Gas analysis. Preparation of calibration gas mixtures - Gravimetric method for Class I mixtures
- 23/30464018 DC BS EN ISO 6143. Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
- BS ISO 12828-1:2011 Validation method for fire gas analysis. Limits of detection and quantification
- BS EN ISO 6142:2006 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
- BS ISO 7504:2015 Gas analysis. Vocabulary
- BS EN ISO 6142:2001 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
- BS EN 61207-7:2014 Expression of performance of gas analyzers. Tuneable semiconductor laser gas analyzers
- BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Critical flow orifices
- BS EN 61207-7:2013 Expression of performance of gas analyzers. Tuneable semiconductor laser gas analyzers
- BS EN 61207-7:2013(2015) Expression of performance of gas analyzers Part 7 : Tuneable semiconductor laser gas analyzers
- BS EN ISO 14912:2006 Gas analysis - Conversion of gas mixture composition data
- BS 3156-11.2.3:1986 Analysis of fuel gases. Methods for non-manufactured gases. Determination of potential hydrocarbon liquid content. Volumetric method
- BS ISO 14912:2003 Gas ananlysis - Conversion of gas mixture composition data
Japanese Industrial Standards Committee (JISC)
- JIS K 0055:1986 General rules for calibration method of gas analyzer
- JIS K 0055:2002 General rules for calibration method of gas analyzer
- JIS K 2301:2008 Fuel gases and natural gas -- Methods for chemical analysis and testing
- JIS K 2301:2011 Fuel gases and natural gas -- Methods for chemical analysis and testing
- JIS K 0108:1983 Analytical methods for determination of hydrogen sulfide in exhaust gas
- JIS K 7217:1983 Analytical method for determining gases evolved from burning plastics
- JIS K 0225:2002 Testing methods for determination of trace components in diluent gas and zero gas
- JIS K 2301 AMD 1:2009 Fuel gases and natural gas -- Methods for chemical analysis and testing (Amendment 1)
- JIS K 2301 AMD 1:2022 Fuel gases and natural gas -- Methods for chemical analysis and testing (Amendment 1)
- JIS K 0114:1993 General rules for gas chromatographic analysis
American Society for Testing and Materials (ASTM)
- ASTM RR-D05-2000 2020 D8339-Test Method for The Analysis of Flue Gas Desulfurization Solids by Macro Thermogravimetric Analysis
- ASTM D8339-20 Standard Test Method for The Analysis of Flue Gas Desulfurization Solids by Macro Thermogravimetric Analysis
- ASTM D3612-02 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
- ASTM UOP373-83 Composition of C2 Through C5 Hydrocarbon Gas Mixtures by Gas Chromatography
- ASTM D7607/D7607M-19 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
- ASTM E1863-07 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
- ASTM D7607-11 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
- ASTM RR-D27-1016 2003 D3612-Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
- ASTM F1396-93(2012) Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
- ASTM D3612-02(2017) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
- ASTM D3612-02(2009) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
- ASTM D3612-02e1 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
- ASTM D3612-01 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
- ASTM D3612-96 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
- ASTM D3270-91(1995)e1 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
- ASTM D1137-53 Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer
German Institute for Standardization
- DIN ISO 16820 E:2020-07 Sensory analysis - Methodology - Sequential analysis
- DIN EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003); English version of DIN EN ISO 6145-1:2008-11
- DIN EN ISO 6143:2006-11 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006
- DIN EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); English version of DIN EN ISO 6145-8:2008-11
- DIN EN ISO 6145-1:2020-02 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019); German version EN ISO 6145-1:2019
- DIN ISO 16820:2009 Sensory analysis - Methodology - Sequential analysis (ISO 16820:2004)
- DIN ISO 16820:2021 Sensory analysis - Methodology - Sequential analysis (ISO 16820:2019)
- DIN EN ISO 6145-1 E:2018-09 Gas Analysis Preparation of Calibration Gas Mixtures Using Dynamic Methods Part 1: General Aspects (Draft)
- DIN EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); English version of DIN EN ISO 6143:2006-11
- DIN EN ISO 6143:2023 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO/DIS 6143:2023); German and English version prEN ISO 6143:2023
- DIN 51893 E:2012-07 Gas analysis - Requirements for specifications of analysers/analytical equipment
- DIN 6146:2018 Gas analysis - Preparation of calibration gas mixtures - Manometric method
- DIN EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
- DIN EN ISO 6142-1:2015-12 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015); German version EN ISO 6142-1:2015
- DIN EN ISO 12460-3:2023-06 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO/FDIS 12460-3:2023); German and English version prEN ISO 12460-3:2023 / Note: Date of issue 2023-05-05*Intended as replacement for DIN EN ISO 12460-3 (2021-02).
- DIN CEN/TR 17421:2020-06 Animal feeding stuffs: Methods of sampling and analysis - Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis; German version CEN/TR 17421:2019
- DIN EN ISO 12460-3:2021-02 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020); German version EN ISO 12460-3:2020 / Note: To be amended by DIN EN ISO 12460-3/A1 (2022-10).
- DIN 6146 E:2017-10 Gas analysis - Preparation of calibration gas mixtures - Manometric method
- DIN 6146:2018-10 Gas analysis - Preparation of calibration gas mixtures - Manometric method
- DIN 51893:2013-12 Gas analysis - Requirements for specifications of analysers/analytical equipment
- DIN 51893:2013 Gas analysis - Requirements for specifications of analysers/analytical equipment
- DIN 51872-5:1996 Testing of gaseous fuels and other gases - Determination of the components - Part 5: Capillary gaschromatographic procedure
- DIN 51898-1 E:2011-01 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM
- DIN 38407-9:1991 German standard methods for the examination of water, waste water and sludge; substance group analysis (group F); determination of benzene and some of its derivatives by gas chromatography (F 9)
- DIN 51898-1:2014 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM
- DIN 51898-1 E:2013-04 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM
- DIN 51894:2012 Gas analysis - Gas chromatographic method for fuel gases/natural gas and other gas mixtures
- DIN 51898-1:2014-05 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM / Note: CD-ROM enclosed
- DIN 51894:2012-09 Gas analysis - Gas chromatographic method for fuel gases/natural gas and other gas mixtures
Spanish Association for Standardization (UNE)
- UNE 77246:2003 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method.
- UNE 77247:2003 Gas analysis -- Comparison methods for determining and checking the composition of calibration gas mixtures.
- UNE-EN ISO 6142:2007 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method (ISO 6142:2001)
- UNE-EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
- UNE 77243-1:2001 Gas analysis.Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 1: Methods of calibration.
- UNE-EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
- UNE 32302:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MACERAL GROUP COMPOSITION.
- UNE-EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
- UNE-ISO 7504:2016 Gas analysis. Vocabulary
- UNE 77242:2004 Gas analysis - Vocabulary
- UNE-CEN/TR 17421:2019 Animal feeding stuffs: Methods of sampling and analysis - Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis (Endorsed by Asociación Española de Normalización in November of 2019.)
- UNE-EN ISO 12460-3:2021 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
- UNE 77238:1999 GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. PERMEATION METHOD.
- UNE 77248:2003 Gas analysis -- Preparation of calibration gas mixtures -- Saturation method.
- UNE-EN ISO 6142-1:2016 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015)
- UNE 77241:2001 Gas analysis. Cheking of calibration gas mixtures by a comparision method.
- UNE-ISO 6145-1:2006 Gas analysis -- Preparation of calibration gas mixtures using dynamic volumetric methods -- Part 1: Methods of calibration (ISO 6145-1:2003)
- UNE-EN ISO 6145-6:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
- UNE-EN 61207-7:2013 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers (Endorsed by AENOR in January of 2014.)
- UNE-EN 61207-7:2013/AC:2015 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers (Endorsed by AENOR in September of 2015.)
- UNE 77243-4:2001 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 4: Continuous injection method.
KR-KS
- KS I ISO TR 24094-2023 Analysis of natural gas — Validation methods for gaseous reference materials
- KS M 3047-2018(2023) Methods for the analysis of evolved gases concentration by burning of plastics
- KS M ISO 6147-2003 Gas analysis-Preparation of calibration gas mixtures-Saturation method
- KS C IEC/TR 62725-2017 Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems
- KS I ISO 6145-10-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
- KS I ISO 6145-9-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
European Committee for Standardization (CEN)
- CEN ISO/TR 24094:2007 Analysis of natural gas - Validation methods for gaseous reference materials
- EN ISO/TR 24094:2007 Analysis of natural gas - Validation methods for gaseous reference materials
- EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
- EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
- EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
- prEN ISO 6143 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO/DIS 6143:2023)
- EN ISO 6142:2006 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
- EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
GSO
- BH GSO ISO 6143:2016 Gas analysis -- Comparison methods for determining and checking the composition of calibration gas mixtures
- GSO ISO 6143:2013 Gas analysis -- Comparison methods for determining and checking the composition of calibration gas mixtures
- GSO ISO 6145-1:2023 Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 1: General aspects
- BH GSO ISO 6145-1:2023 Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 1: General aspects
- GSO ISO 12828-2:2021 Validation method for fire gas analysis — Part 2: Intralaboratory validation of quantification methods
- GSO ISO 6142-1:2021 Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method for Class I mixtures
- BH GSO ISO 6142-1:2022 Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method for Class I mixtures
- BH GSO ISO 12828-2:2022 Validation method for fire gas analysis — Part 2: Intralaboratory validation of quantification methods
- GSO ISO 7504:2016 Gas analysis -- Vocabulary
- BH GSO ISO 12460-3:2017 Wood-based panels -- Determination of formaldehyde release -- Part 3: Gas analysis method
- GSO IEC/TR 62725:2017 Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems
- GSO ISO 12460-3:2015 Wood-based panels -- Determination of formaldehyde release -- Part 3: Gas analysis method
- GSO ISO 6144:2008 Gas analysis - Preparation of Calibration gas mixtures - Static Volumetric method
- GSO ISO 12828-1:2015 Validation method for fire gas analysis -- Part 1: Limits of detection and quantification
- BH GSO ISO 19702:2016 Toxicity testing of fire effluents -- Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
- OS GSO ISO 19702:2013 Toxicity testing of fire effluents -- Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
- OS GSO ISO 12828-1:2015 Validation method for fire gas analysis -- Part 1: Limits of detection and quantification
RU-GOST R
- GOST R 57851.1-2017 Gas-condensate mixture. Part 1. Separation gas. Compositional analysis by gas chromatography method
- GOST 23481-1979 Poultry meat. Method of hystological analysis
- GOST 14920-1979 Dry gas. Method for determination of component composition
- GOST 21533-1976 Wood chemical products. Method of test by gas chromatography
- GOST R 8.729-2010 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
- GOST 31931-2012 Poultry meat. Method of histologicaland microscopic analysis
- GOST 5439-1976 Natural and synthetic combustion gases. Method for determination of volume fraction of components using a set of gas analysers (SGA)
- GOST 24032-1980 Mine instruments for gas analysis. General technical requirements. Testing methods
- GOST R IEC 61207-6-2010 Gas analyzers. Expression of performance. Part 6. Photometric gas analyzers
- GOST R ISO 6142-2008 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
- GOST R ISO 15859-1-2010 Space systems. Fluid characteristics, sampling and methods of analysis. Part 1. Oxygen
GOST
- GOST R ISO 21087-2023 Gas analysis. Hydrogen fuel analytical methods for proton exchange membrane fuel cell
- GOST R 70753-2023 Concrete. Method of microscopic quantitative analysis of the structure of air pores
- GOST 31610.29-4-2023 Explosive atmospheres. Part 29-4. Gas detectors. General technical requirements and test methods of open path detectors for flammable gases
Danish Standards Foundation
- DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- DS/EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
- DS/ISO 7404-3:2009 Methods for the petrographic analysis of coals - Part 3: Method of determining maceral group composition
- DS/EN ISO 6142:2007 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
- DS/EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
- DS/IEC/TR 62725:2013 Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems
CZ-CSN
- CSN ISO 6145-1:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods
- CSN ISO 7504:1993 Gas analysis. Terminology
- CSN ISO 6349:1993 Gas analysis. Preparation of calibration gas mixtures. Permeation method
- CSN ISO 6147:1993 Gas analysis. Preparation of calibration gas mixtures. Saturation method
- CSN ISO 6712:1993 Gas analysis. Sampling and transfer equipment for gases supplying an analytical unit
PL-PKN
- PN G04529-1992 Hard coal Method for the petrographic analysis Determination of contents of maceral groups and minera? matter
IN-BIS
- IS 10593-1983 Methods for evaluation of gas analysis in in-service oil-filled electrical equipment
International Electrotechnical Commission (IEC)
- IEC 61207-3:1998 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
- IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
- IEC 61207-7:2013 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers
Natural Gas Processor's Association (NGPA)
- GPA STD 2261-2000 Analysis for Natural Gas and Similar Gaseous Mixtures by Gas Chromatography
- GPA STD 2166-2005 Obtaining Natural Gas Samples for Analysis by Gas Chromatography
Lithuanian Standards Office
- LST EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
- LST EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
European Committee for Electrotechnical Standardization(CENELEC)
- EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers
Australian/New Zealand Standard (AU-AS/NZS)
- AS/NZS 3580.2.2:2016 Methods for sampling and analysis of ambient air, Method 2.2: Preparation of reference test atmospheres — Compressed gas method
- AS/NZS 3580.2.2:2009 Methods for sampling and analyzing ambient air refer to the method for preparing compressed gases for test atmospheres
AWS - American Welding Society
- F1.5-1996 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
- F1.5-1987 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
- F1.5M-2003 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
YU-JUS
- JUS H.F8.402-1990 Gas analysis. Deteralnation of composition of calibration gas mixtures. Comparlstm methods
- JUS H.F8.403-1990 Gas analysis. Preparat ion of callbration gas mixtures. Manometric method
- JUS H.F8.401-1990 Gas analysis. Preparation of calibration gas mixtures. Pnrmeaticm metbod
- JUS H.F8.404-1990 Gas analysis. Preparat ion of calibration gas mixtures. Meighing methods
- JUS H.F8.102-1987 Gas analysis. Sampling the liguedgases
Standard Association of Australia (SAA)
- AS 3580.3.1:1990 Methods for sampling and analysis of ambient air - Determination of acid gases - Titrimetric method
- AS 3580.2.2:1990 Methods for sampling and analysis of ambient air - Preparation of reference test atmospheres - Compressed gas method
DIN
- DIN CEN/TR 17421:2020 Animal feeding stuffs: Methods of sampling and analysis - Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis
Gas Isotope Analysis Methods,Gas composition analysis,gas composition method,Gas analysis method,Gas detection analysis method,Gas composition analysis method,How to use the gas analyzer,Gas composition analysis,Gas Composition Analysis Methods,Methods for Analyzing Gas Composition,Laboratory Gas Analysis Methods,Gas Composition Determination Method,Gas impurity analysis method,Analysis of Gas Organic Components,Component Quantitative Analysis Method,Gas composition analysis method,Gas composition analysis method,Gas composition analysis method,Gas Analyzer Method,Dissolved gas component content analysis