Acceptance personnel

Acceptance personnel, Total:282 items.

The international standard classification for "Acceptance personnel" includes: Aerospace electric equipment and systems , Medical Sciences and health care facilities in general , Applications of information technology , Protection against crime , Transfusion, infusion and injection equipment , Sensory analysis , Soil quality. Pedology , Landscaping and silviculture , Wind turbine systems and other alternative sources of energy , Occupational safety. Industrial hygiene , Rubber and plastics products in general , Services in general , Industrial robots. Manipulators , Burners. Boilers , Product and company certification. Conformity assessment , Pressure vessels, gas cylinders , Fluid storage devices , Meat and meat products , Power stations in general .

The Chinese standard classification for "Acceptance personnel" includes: Electronic components , Health quarantine , Traffic information management , Guard and alarm system , Traffic safety detecting equipment , Mapping in general , Basic standards and general methods , Water and soil conservation , Mine and coal engineering , Civil air defense works , Forest conservation , Wind energy , Freshwater aquaculture and product , Labor safety technology in general , Latex products , Commerce, Trade and Contract , Automatic logistics equipment , Boiler and its auxiliary equipment , Standardization and Quality Management , Safety and health skill assessment , Pressure vessel , Internal combustion engine and auxiliary equipment , Technical management , Power plant and electric power system operating maintenance , , Water power engineering .

Hubei Provincial Standard of the People's Republic of China

DB42/T 837-2012 Safety acceptance specification for installation of stair lifts for people with reduced mobility

Group Standards of the People's Republic of China

T/CEC 315-2020 Specification for training and examination of high voltage test technicians
T/SDIOT 012-2020 Constructive guidelines of smart access control system for assembly occupancies
T/CAQI 383-2024 Guide to the evaluation of laboratory personnel's ability
T/CCPITCSC 27-2019 Requirements for occupational competence of hotel revenue management professional
T/HNZL 0001-2021 Specifications for construction and acceptance of cold storage in agricultural product origin
T/CMA SB 005-2014 Remote Wire Transmission Water Meter Auto Reading System Installation & Acceptance Technical Specification
T/CASMES 178-2023 Professional skills service standards for non-performing asset recovery practitioners
T/CMA SB040-2019 NB-IoT water meter automatic meter reading system on-site installation, acceptance and use technical guide
T/HEEIA 0001-2022 Specifications for acceptance of classroom lighting in primary and secondary schools and kindergartens
T/CIQA 2-2019 Code of practice for inspection and survey personnel
T/CGCPU 024-2022 Specification for training management of practitioners in clinical trial institution
T/JJX 021.2-2022 Requirements for practitioners of motor vehicle inspection agencies
T/ZSVA 001-2021 Standard for construction and acceptance of sports venues
T/GSWX 003-2023 Work Requirements and Professional Ethics Standards for Toll Collectors in Residential Areas
T/CGCPU 024-2023 Specification for training management of practitioners in clinical trial institution
T/SHZSAQS 00089-2022 Odor inspectors regularly compare technical regulations
T/SHPPA 029-2024 Technical specification for human experience data collection
T/CALAS 1-2016 Laboratory animal - Requirement for laboratory animal practitioner
T/HENANPA 006-2022 Specifications for acceptance of Chinese herbal medicines
T/SXS 095-2024 Specification for ability requirements ofmotor vehicle inspectors
T/CAS 291-2017 The specification for expressway toll collector serving
T/FWCA 004-2022 Professional Skills Level Certification Personnel Management Standards
T/CCAA 60-2023 Inspection and Testing Personnel Supervision and Monitoring Implementation Guide

Henan Provincial Standard of the People's Republic of China

DB4103/T 150-2024 Quality management and acceptance specifications for high-standard farmland construction projects
DB41/T 610-2016 Operating specifications for expressway toll personnel
DB41/T 610-2024 Highway toll collectors' operating specifications

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1502-2021 Electric Vehicle Charging Station (Pile) Acceptance Specification
DB61/T 1076-2017 Service specification for expressway toll personnel

Hunan Provincial Standard of the People's Republic of China

DB43/T 1807-2020 Specification for acceptance of installation of vertical lift platforms for persons with reduced mobility
DB43/T 2299-2022 Specifications for quality acceptance of mine ecological protection and restoration projects
DB43/T 1806-2020 Specifications for installation and acceptance of stair lifts for people with reduced mobility

Professional Standard - Aerospace

QJ 1511A-1998 Semiconductor Discrete Devices - Specifications for Acceptance
QJ 1995A-1998 Specification for Acceptance of Integrated Circuit
QJ 1908A-1998 Acceptance Uncovering Check Method of Semiconductor Devices
QJ 3065.3-1998 Management Requirements for Device Manufacturing and Acceptance

Zhejiang Provincial Standard of the People's Republic of China

DB3304/T 100-2023 Standards for digital archiving and exchange of mobile personnel personnel files

Yunnan Provincial Standard of the People's Republic of China

DB53/T 207.35-2007 Yongsheng Flue-cured Tobacco Production and Acquisition Personnel Management Regulations

Anhui Provincial Standard of the People's Republic of China

DB34/T 4072-2021 Acceptance specification for smart intravenous drug dispensing center
DB34/T 2158-2014 Specification for on-site acceptance of water turbines for industrial cooling towers
DB34/T 1835-2013 Smile Service Specifications for Expressway Toll Collectors
DB3403/T 01-2018 Government Procurement Contract Performance Quality Acceptance Specifications
DB34/T 3059-2017 Informatization project acceptance specification
DB34/T 3697-2020 Specifications for acceptance of safety precautions in banking business premises
DB34/T 1835-2022 Smile Service Specifications for Expressway Toll Collectors
DB34/T 3791-2021 Smart Pharmacy Acceptance Specifications
DB34/T 4068-2021 Acceptance Specifications for Smart Pharmacy
DB34/T 4527-2023 Specifications for acceptance of new energy electric vehicle battery swap stations
DB34/T 4243-2022 Smart hospital medical consumables SPD acceptance specification

Shandong Provincial Standard of the People's Republic of China

DB37/T 3913-2020 Acceptance Specifications for Assembled Swimming Pools
DB37/T 4075-2020 Guidelines for the Construction of Intelligent Information System for Epidemic Prevention and Control in Crowded Places
DB37/T 2400-2013 Smile Service Specifications for Expressway Toll Collectors
DB3704/T 0050-2024 Integrity requirements for food inspection agency practitioners
DB37/T 3400-2018 Specification for inspection and acceptance of artificial turf surface for sports
DB37/T 3912-2020 Cage soccer field acceptance specification

Shanxi Provincial Standard of the People's Republic of China

DB1410/T 138-2024 School canteen food distribution and acceptance management specifications
DB14/T 2498-2022 Guidelines for the Management of Technical Files of Inspection and Testing Institutions
DB14/T 3012-2024 Acceptance specifications for metal cultural relics protection and restoration projects
DB1404/T 14-2021 Management requirements for foreign personnel of inspection and testing institutions
DB14/T 2534-2022 Universal testing machine acceptance specification
DB1404/T 10-2021 Reagent acceptance management requirements for inspection and testing institutions

Professional Standard - Civil Aviation

AC-65-01-1993 Maintenance personnel license, inspection personnel license training, examination and certification
AP-65-01-1993 Maintenance personnel license, inspection personnel license training, examination and certification

Military Standard of the People's Republic of China-General Armament Department

GJB 5715-2006 Procedures for inspection and acceptance of imported equipments

未注明发布机构

NB 20502-2018 Technical regulations for the installation and acceptance of personnel gates and equipment gates in pressurized water reactor nuclear power plants

国家能源局

NB/T 10939-2022 Rules for receiving acceptance of materials for boiler construction
NB/T 20502-2018 Technical specification for installation and acceptance of personnel airlock and equipment hatch in PWR nuclear power plant

Hebei Provincial Standard of the People's Republic of China

DB1303/T 352-2023 Technical specification for food rapid testing product acceptance
DB13/T 2670-2018 Requirements for courier post

Professional Standard - Commodity Inspection

SN/T 2752.4-2011 Specifications of Personal-protection for Health Quarantine Staff - Part 4: Laboratory Staff
SN/T 1344-2003 Codes of health and quarantine inspection for persons entering or leaving the territory
SN/T 2097-2008 Codes for examination of monkeypox at entry-exit port
SN/T 3900-2014 Review specifications for laboratories of entry-exit inspection and quarantine
SN/T 4234-2015 Rules of inspection and quarantine for articles carried by arriving passengers

Tianjin Provincial Standard of the People's Republic of China

DB12/T 824-2018 Service Requirements for Clothes Collectors in the Front Desk of the Laundry and Dyeing Industry
DB12/ 402-2008 Estimation and Inspection of Blood Alcohol Content of Vehicle Personnel

Professional Standard - Public Safety Standards

GA 1766-2021 Specifications for acceptance of video and image information system for public security
GA/T 1030.2-2012 Acceptance specifications for driving test fields and driving test systems—Part 2:Test systems
GA/T 1030.1-2012 Acceptance specifications for driving test fields and driving test systems—Part 1:Test fields
GA/T 1147-2014 Labortory specifications for examination of ethanol concentration in drivers blood

Professional Standard - Surveying and Mapping

CH 1002-1995 Specifications for inspection and acceptance of surveying and mapping products

Shanghai Provincial Standard of the People's Republic of China

DB31/T 1158-2019 Completion acceptance specification for occupational disease protection facilities of construction projects

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 10060-1993 Code for Acceptance of Elevator Installation
GB 50300-2013 Unified Acceptance Standard for Building Construction Quality
GB 50840-2012 Code for construction and acceptance of slurry pipeline engineering
GB/T 15773-1995 Regulation of acceptance for comprehensive control of soil erosion
GB/T 18337.4-2008 Non-commercial forest construction - Verification regulation
GB/T 23470.1-2009 Sensory analysis—General guidance for the staff of a sensory evaluation laboratory—Part 1:Staff responsibilities
GBJ 134-1990 Specifications for construction and acceptance of civil air defence construction
GB/T 15773-2008 Comprehensive control of soil and water conservation―Regulation of acceptance

Guangxi Provincial Standard of the People's Republic of China

DB45/T 2619-2022 Specifications for pre-acceptance of urban rail transit electric passenger cars

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 4337-2022 Code for safety acceptance of combustible dust removal system
DB32/T 3953-2020 Wind turbine generator systems—Specification for first article acceptance of projects under construction

Professional Standard - Nuclear Industry

EJ/T 769-1993 Code for acceptance of computer software in nuclear industry
EJ/T 516-1990 Qualifications of nuclear power plant inspection, inspection and test personnel

Professional Standard - Aquaculture

SC/T 1017-1995 Acceptance Rules for Pond Pisciculture

Professional Standard-Safe Production

AQ/T 4127-2018 Technical Specification on Occupational Health Management for the Steel Rolling Industry

Professional Standard - Agriculture

NY/T 3350-2018 Requirement for meat quality inspector
SB/T 10359-2003 Skill requirements for meat quality inspectors
NY/T 1038-2006 Material for primary processing - Natural coagulate rubber - Method of check and accept
NY/T 1717-2009 Technical regulation on agricultural construction project acceptance

中华全国供销合作总社

GH/T 1323-2021 Specification for e-commerce agricultural product acceptance
GH/T 1301-2020 Specification for e-commerce fruits acceptance

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 3598-2023 Hemp Inspection and Testing Laboratory Personnel Competency Requirements
DB23/T 3095-2022 Technical Standards for Receiving and Accepting Physical Geological Data
DB23/T 2320-2019 Technical procedures for acceptance and acceptance of original geological data
DB23/T 3209-2022 Government Service Platform Project Acceptance Specifications

Professional Standard - Machinery

JB/T 3375-2002 Rules for receiving acceptance of materials for boiler construction
JB/T 8896-1999 Industrial robot - Acceptance rules

国家认证认可监督管理委员会

RB/T 150-2018 Guidance for staff supervision of food test body

Jilin Provincial Standard of the People's Republic of China

DB22/T 2492-2016 Code of Conduct for Inspection and Testing Institutions

Professional Standard - Special Equipment Specification

TSG Z8001-2013 Examination rules for special equipment non-destructive testing inspectors
TSG Z8002-2013 Examination Rules for Special Equipment Inspectors
TSG D6001-2006 Examination Requirements for Safety Administrator and Operator of Pressure Pipe
TSG R6001-2008 Examination Requirements for Safety Administrator and Operator of Pressure Vessel
TSG G6001-2009 Examination Requirements for Safety Administrator and Operator of Boiler
TSG R6001-2011 Examination Requirements for Safety Administrator and Operator of Pressure Vessel
TSG T6001-2007 examination requirements for safety administrator and operators of elevator

农业农村部

NY/T 3440-2019 Acceptance specification of biogas septic tanks for domestic sewage treatment

Professional Standard - Traffic

JT/T 27.54-1993 Technical level standards for workers in the transportation industry Road transport and road maintenance Vehicle toll collectors (manual toll collection)

Professional Standard - Railway

TB/T 2746-2002 Series tests and acceptance conditions for diesel engines of motive power units

Professional Standard - Energy

NB/T 20122-2012 Checking-and-acceptance Management Provision for the Quality and the Hand-over of Nuclear Power Engineering Construction

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1252-2011 Quality acceptance specification for government procurement of teaching instruments and equipment

Beijing Provincial Standard of the People's Republic of China

DB11/ 1070-2014 Municipal infrastructure engineering quality inspection and acceptance standards
DB11/T 1882-2021 Construction quality acceptance criteria for urban rail transit stations

Professional Standard - Business

SB/T 10359-2011 Requirement for meat quality inspector

Professional Standard - Petroleum

SY/T 5548.5-1992 General provisions on inspection and acceptance of commonly used chemical products in the petroleum industry
SY/T 5548.3-1992 General provisions on inspection and acceptance of mechanical and electrical products commonly used in petroleum industry
SY/T 5548.6-1992 General regulations on inspection and acceptance of commonly used building materials in petroleum industry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 27203-2016 Conformity assessment-Vocabulary related to competence of persons used for certification of persons

Taiwan Provincial Standard of the People's Republic of China

CNS 13588-2006 Qualification and certification of non-destructive testing personnel

Professional Standard - Electricity

DL/T 1113-2009 The inspection code of pipe hangers and supports for power plants
DL/T 931-2017 The rules for examination of physical-chemical inspectors in electric power industry
DL/T 931-2005 The rule of physico-chemical personnel qualification in electric power industry
DL/T 1279-2013 Specification of Acceptance for Submarine Power Cable Line At A Rated Voltage up to 110kV
DL/T 2027-2019 Guideline of order and acceptance for drain valves in thermal power plant
DL/T 490-2011 Rule for installation and accepting test regulation of the generator excitation system

Guizhou Provincial Standard of the People's Republic of China

DB52/T 944-2015 Code for acceptance of boiler energy-saving retrofit

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 1268A-2004 Military Software Acceptance Requirements

Professional Standard - Aviation

HB 5357-1990 Qualification and certification of aviation non-destructive testing personnel

Professional Standard - Water Conservancy

SL 223-2008 Specification of construction acceptance on water resources and hydroelectric development

工业和信息化部

YD/T 5132-2021 Acceptance Specifications of Structure Engineer for Mobile Communication Steel Tower and Mast

American Society of Mechanical Engineers (ASME)

ASME N45.2.6-1978 Qualifications of inspection, examination, and testing personnel for nuclear power plants
ASME QEI-1b Addenda-2003 Standard for the qualification of elevator inspectors; Addenda
ASME QRO-1-1994 Standard for the qualification and certification of resource recovery facility operators
ASME B31 Q-2010 Pipeline Personnel Qualification
ASME B30.23-2016 Personnel Lifting Systems
ASME B30.23-2022 Personnel Lifting Systems
ASME B31Q-2014 Pipeline Personnel Qualification
ASME B31Q-2006 Pipeline Personnel Qualification
ASME B30.23-2011 Personnel Lifting Systems

IX-ICAO

ICAO 9375 BOOK 1-1993 Dangerous Goods Training Programme Book 1 Shippers, Cargo Agents and Operators?Cargo Acceptance Staff Third Edition

RU-GOST R

GOST 24782-1990 Army uniforms. Acceptance inspection of quality
GOST 26053-1984 Industrial robots. Acceptance rules. Methods of test
GOST 25451-1982 Artificial and synthetic leather. Acceptance rules
GOST R ISO 20807-2015 Non-destructive testing. Qualification of personnel for limited applications of non-destructive testing

American Industrial Hygiene Association （AIHA)

ASSE 6000 SERIES-2004 Professional Qualifications Standard for Medical Gas Systems Installers, Inspectors, Verifiers, Maintenance Personnel and Instructors
ASSE SERIES 5000-1998 Professional Qualification Standards for Backflow Prevention Assembly Testers, Repairers and Surveyors

SCC

MIL MIL-M-70778-1988 MINE, ANTI-PERSONNEL, M86 ACCEPTOR LEAD ASSEMBLY FOR
AWWA ACE90043 Banking of Retirees' Experience
SN-CWA 17974:2023 Basic CBRN training curriculum for first responders and medical staff including first receivers
SAA/SNZ MP76:1997 Pressure equipment - Inspection bodies and personnel
MIL MIL-DTL-3476/43-1997 BRASSARD, PERSONNEL ASSISTANCE POINTS, TOTAL ARMY PERSONNEL COMMAND
BS PD CEN ISO/TS 24283-1:2022 Geotechnical investigation and testing. Qualification criteria and assessment-Qualified technician and qualified operator
BS CWA 13620-3:1999 ESCROWGUIDE. Guidelines for acquirers, developers, escrow agents and quality assessors. A developer's guide to taking part in source code escrow
DANSK DS/ISO/IEC 25041:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation guide for developers, acquirers and independent evaluators
12/30237483 DC BS ISO 5721-1. Agricultural tractors. Requirements, test procedures and acceptance criteria for the operator's field of vision. Field of vision to the front
CAN/CGSB-38.101-1993 Hospital Ward Orderly and Maintenance Staff Trousers - Dimensions
CAN3-B601-1984 Qualification code for chimney sweep technicians, installers and inspectors of solid fuel heating systems
CAN2-38.101-1978 Trousers, Ward Orderly and Hospital Maintenance Staff - Dimensions
CAN 2-38.7-M79-1979 Cotton coats for men (doctors and laboratory technicians)
AWWA WQTC57027 A Novel Approach to Career Advancement for Laboratory Staff
VDI 4062-2016 Emergency evacuation of people
VDI 2168-2007 Lifts — Qualification of personnel
AWWA ACE94044 Rate Relief Through the Eyes of Commission Staff
ASME B31Q-2010 Pipeline Personnel Qualification
DANSK DS 439:2009 Norm for vandinstallationer

US-HUD

HUD 24 CFR PART 135-2011 ECONOMIC OPPORTUNITIES FOR LOW- AND VERY LOW-INCOME PERSONS

BE-NBN

NBN-EN 355-1993 Personal protective equipment against falls from a height. Energy absorbers
NBN-EN 360-1993 Personal protective equipment against falls from a height. Retractable type fall arresters
NBN-EN 364-1993 Personal protective equipment against falls from a height. Test methods

American National Standards Institute （ANSI)

ANSI/ASSE Series8000-2011 Professional Qualifications Standard for Self Contained Breathing Apparatus Replenishment Systems Installers, Inspectors and Verifiers
ANSI/NETA ETT-2010 Certification of Electrical Testing Technicians (ETT)
ANSI/AIHA Z88.6-2006 Respirator Use - Physical Qualifications for Personnel
ANSI/ASME QRO-1-2005 Qualification and Certification of Resource Recovery Facility Operators
ANSI/ASSE Z359.14-2012 Safety Requirements for Self-Retracting Devices for Personal Fall Arrest and Rescue Systems
ANSI/ASME B30.23-2011 Personnel Lifting Systems
ANSI/JCSEE PersonnelEvaluation-2008 The Personnel Evaluation Standard

European Committee for Standardization (CEN)

EN 355:1992 Personal protective equipment against falls from a height; energy absorbers
EN 355:2002 Personal protective equipment against falls from a height - Energy absorbers
EN 360:2002 Personal Protective Equipment Against Falls from a Height - Retractable Type Fall Arresters
EN 364:1992 Personal Protective Equipment Against Falls from a Height - Test Methods
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
EN 473:1993 Qualification and certification of NDT personnel; general principles

Association Francaise de Normalisation

CWA 13620-3:1999 Source Code Escrow - Guidelines for Acquirers, Developers, Escrow Agents and Quality Assessors - Part 3 : A developer's guide to taking part in source code escrow
NF ISO 13300-1:2006 Analyse sensorielle - Guide général à l'attention du personnel des laboratoires d'analyse sensorielle - Partie 1 : responsabilités du personnel
NF EN ISO 16021:2001 Urine absorption aids - Basic principles for the evaluation of adult incontinent aids by users and caregivers
NF E58-058:1999 Earth-moving machinery. Human physical dimensions of operators and minimum operator space envelope.

GB-REG

REG NASA-LLIS-0468-1993 Lessons Learned - Operation Training for KSC Personnel
REG NASA-LLIS-1295-2002 Lessons Learned ?Key Personnel Retention After Launch
REG NASA-LLIS-1192-2001 Lessons Learned ?Exposure of Personnel to Electrocution Hazard
REG NASA-LLIS-1502-2003 Lessons Learned - Orbital Space Plane Crew Survival and Human Rating
REG NASA-LLIS-1570--2005 Lessons Learned ?In-House vs. Out-of-House Staffing Mix
REG 46 CFR PART 13-2011 Certification Of Tanker men

British Standards Institution (BSI)

BS PD CEN/TR 15628:2007 Maintenance — Qualification of Maintenance personnel
BS EN 355:2002 Personal protective equipment against falls from a height - Energy absorbers
BS EN 473:2000 Non-destructive testing - Qualification and certification of NDT personne l. General principles

International Organization for Standardization (ISO)

ISO 18490:2015 Non-destructive testing - Evaluation of vision acuity of NDT personnel
ISO/TR 25108:2006 Non-destructive testing - Guidelines for NDT personnel training organizations
ISO 20807:2004 Non-destructive testing - Qualification of personnel for limited application of non-destructive testing

NZS

SAA/SNZ MP 76:1997 Pressure equipment - Inspection bodies and personnel

Danish Standards Foundation

DS 2322.3:1986 Personal eye-protectors. Optical test methods
DS 2322.4:1986 Personal eye-protectors. Mechanical test methods (Non-optical test methods)
DS/EN ISO 16021:2001 Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers
DS/ISO/IEC 25041:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation guide for developers, acquirers and independent evaluators
DS/EN 61032/Corr.1:2006 Protection of persons and equipment by enclosures - Probes for verification
DS/EN 61032:1998 Protection of persons and equipment by enclosures - Probes for verification
DS/INF 32:1989 Certidication of personnel in weldshops

Association of German Mechanical Engineers

DVS-EWF 1178 Beiblatt 2-1997 DVS-EWF Course - Welding Inspector Level 1 to Level 4 - Technical Inspection Training Laboratory Facilities; Personnel Requirements
VDI 4068 Blatt 1-2009 Competent Persons - Qualification criteria, selection of Competent Persons and training
DVS-EWF 1178-1997 DVS-EWF Course-Welding Inspector Level 1 to Level 4

CN-GJB-H

GJB 7107-2011 Gode for acceptance of logistics system in military automated storage and retrieval system

South African Bureau of Standard

SANS 50355:2003 Personal protective equipment against falls from a height - Energy absorbers

US-FCR

FCR NAV MO-312.2-1991 RECEIPT AND INSPECTION OF TREATED WOOD PRODUCTS BY INSTALLATION PERSONNEL
FCR NAV DM-36.1 CHANGE 1-1982 UNACCOMPANIED PERSONNEL HOUSING
FCR NAV DM-36.1-1981 UNACCOMPANIED PERSONNEL HOUSING
FCR COE ER 600-1-8-1980 RESEARCH ASSOCIATES WITH THE LAWRENCE LIVERMORE LABORATORY
FCR DOE 5480.15-1987 DEPARTMENT OF ENERGY LABORATORY ACCREDITATION PROGRAM FOR PERSONNEL DOSIMETRY
FCR FED H-08-4 VOL 1 13A-1992 PERSONNEL SHOWER (SINGLE USE AREA)
FCR DOE 472.1B-1997 PERSONNEL SECURITY ACTIVITIES

PL-PKN

PN P06748-1990 Man-made filament yarns Acceptance tests

API - American Petroleum Institute

API RP T-7-1995 Training of Personnel in Rescue of Persons in Water (Second Edition)

American Welding Society (AWS)

AWS WI CH 16-2000 Qualification of Nondestructive Examination Personnel(Welding Inspection)

US-DOT

DOT 49 CFR PART 1185-2010 INTERLOCKING OFFICERS
DOT 49 CFR PART 1246-2010 NUMBER OF RAILROAD EMPLOYEES

Standard Association of Australia （SAA）

AS 1298:1980 Levelling staffs
AS 3998:2006 Non-destructive testing - Qualification and certification of personnel
AS IEC 61032:2023 Protection of persons and equipment by enclosures — Probes for verification
AS 4635:2004 Non-destructive testing - Qualification of personnel for limited applications of non-destructive testing
AS 3669:2006 Non-destructive testing - Qualification and approval of personnel - Aerospace

German Institute for Standardization

DIN 18703:2021-06 Levelling staffs
DIN-Fachbericht 150:2007 Qualification of personnel for destructive testing
DIN EN ISO 12402-9:2006 Personal flotation devices - Part 9: Test methods (ISO 12402-9:2006); English version of DIN EN ISO 12402-9:2006-12
DIN EN 363:2008 Personal fall protection equipment - Personal fall protection systems; English version of DIN EN 363:2008-05
DIN EN ISO 16021:2001-02 Urine absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers (ISO 16021:2000); German version EN ISO 16021:2000
DIN 18703:2021 Levelling staffs

U.S. Air Force

AIR FORCE JSSG-2010-3 CONT. DIST.-1998 CREW SYSTEMS COCKPIT/CREW STATION/CABIN HANDBOOK

US-CFR-file

CFR 20-416.1015-2013 Employees' benefits. Part416:Supplemental security income for the aged, blind, and disabled. Section416.1015:Making disability determinations.
CFR 46-15.1113-2013 Shipping. Part15:Manning requirements. Section15.1113:Security personnel.

Korean Agency for Technology and Standards (KATS)

KS Q ISO 13300-1-2007(2012) Sensory analysis－General guidance for the staff of a sensory evaluation laboratory－Part 1：Staff responsibilities
KS Q ISO 13300-1-2007(2021) Sensory analysis－General guidance for the staff of a sensory evaluation laboratory－Part 1：Staff responsibilities
KS V ISO 12402-9:2012 Personal flotation devices－Part 9：Test methods
KS B ISO 20807:2005 Non-destructive testing－Qualification of personnel for limited application of non-destructive testing

American Petroleum Institute (API)

API RP T-7-1995(2013) Training of Personnel in Rescue of Persons in Water Second Edition

Society of Automotive Engineers (SAE)

SAE ARP9162-2005 Aerospace Operator Self-Verification Programs
SAE ARP583K-2022 Cabin Crew Stations
SAE 1010A-2023 Standard Practice for Manpower and Personnel
SAE SAE1010A-2023 Standard Practice for Manpower and Personnel

Japanese Industrial Standards Committee (JISC)

JIS Z 2305:2001 Non-destructive testing -- Qualification and certification of personnel

AASHTO - American Association of State Highway and Transportation Officials

RB-2003 AASHTO Reference Book - Member Department Personnel and Committees
RB-2004 AASHTO Reference Book; Member Department Personnel and Committees
RB-2007 AASHTO Reference Book; Member Department Personnel and Committees
RB-2006 AASHTO Reference Book; Member Department Personnel and Committees
RB-2005 AASHTO Reference Book; Member Department Personnel and Committees

U.S. Military Regulations and Norms

ARMY MIL-T-44372 A-1991 TROUSERS, AIRCREW, COMBAT

GSO

BH GSO ISO 13300-1:2016 Sensory analysis -- General guidance for the staff of a sensory evaluation laboratory -- Part 1: Staff responsibilities
OS GSO OIML R40:2005 STANDARD GRADUATED PIPETTES FOR VERIFICATION OFFICERS
OS GSO ISO 16021:2015 Urine-absorbing aids -- Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers
BH GSO ISO 16021:2017 Urine-absorbing aids -- Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers

National Aeronautics and Space Administration (NASA)

NASA NPR 3335.1 REV H-2010 INTERNAL PLACEMENT OF NASA EMPLOYEES

Canadian General Standards Board （CGSB)

CGSB 133.1-2008-CAN/CGSB CORR 1-2008 Security Guards and Security Guard Supervisors

SAE - SAE International

SAE ARP583J-2017 Cabin Crew Stations

American Society for Testing and Materials (ASTM)

ASTM D3276-05 Standard Guide for Painting Inspectors (Metal Substrates)
ASTM D3276-07 Standard Guide for Painting Inspectors (Metal Substrates)
ASTM D3276-00 Standard Guide for Painting Inspectors (Metal Substrates)
ASTM E1188-95 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator

AT-ON

ONORM M 3041-2002 Training of personnel carrying out non-destructive testing (NDT personnel)

Spanish Association for Standardization (UNE)

UNE-EN 61032:1998 PROTECTION OF PERSONS AND EQUIPEMENT BY ENCLOSURES. PROBES FOR VERIFICATION.
UNE-EN ISO 16021:2001 Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers. (ISO 16021:2000)

VDI - Verein Deutscher Ingenieure

VDI 4068 Blatt 1-2008 Competent persons - Qualification criteria@ selection of competent persons and training
VDI 2168-2006 Lifts - Personnel qualification

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS ISO/IEC 25041:2013 Systems and Software Engineering Systems and Software Quality Requirements and Evaluation (SQuaRE) Evaluation Guide for Developers, Acquirers and Independent Evaluators