Main methods for measuring protoplast viability

Main methods for measuring protoplast viability, Total:439 items.

The international standard classification for "Main methods for measuring protoplast viability" includes: Farming and forestry in general , Biology. Botany. Zoology , Surface active agents , Solid fuels , Coals , Other non-ferrous metals and their alloys , Optoelectronics. Laser equipment , Farming and forestry , Magnetic components , Tractive stock , Implants for surgery, prosthetics and orthotics , Examination of water for chemical substances , Petroleum products and natural gas handling equipment .

The Chinese standard classification for "Main methods for measuring protoplast viability" includes: Basic standard and general method on forestry , Environmental Condition and General Test Method , Basic standards and general methods for surface active agent , Charcoal , Coal analysis methods , Rare scattered metals and their alloys , Laser device , Coal for coking, chemical and building materials , Magnetic component , Locomotives in general , Sampling methods for solid waste, soil and other environmental elements , Orthopedic devices , Basic standards and general methods for water treatment agent , Petroleum and gas gathering and transportation .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 5550-2016 Surface active agents--Determination of dispersing power
GB/T 36055-2018 Method for analysis of forestry biomass—Determination of moisture content
GB/T 35818-2018 Standard method for analysis of forestry biomass―Determination of structural polysaccharides and lignin
GB/T 35905-2018 Test methods for biomass—Determination of total solids in biomass
GB/T 36056-2018 Method for analysis of forestry biomass—Determination of soluble saccharides content
GB/T 34800-2017 Detection method of activity and impurity of proteinase K
GB/T 35808-2018 Method for analysis of forestry biomass-Determination of cellulase activity
GB/T 35811-2018 Method for analysis of forestry biomass—Determination of starch content
GB/T 36057-2018 Method for analysis of forestry biomass—Determination of ash content
GB/T 35812-2018 Method for analysis of forestry biomass—Determination of insoluble solids following pretreatment
GB/T 35816-2018 Standard method for analysis of forestry biomass—Determination of extractives content
GB/T 35809-2018 Method for analysis of forestry biomass—Determination of protein content

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 2060-2017 Rapid Determination Method of Leymus chinensis Seed Viability

Shanghai Provincial Standard of the People's Republic of China

DB31/T 391-2007 Main domestic water quotas and calculation methods for schools, hospitals and hotels

Professional Standard - Agriculture

284药典三部-2015 Biological Activity-Potency Determination Method 3502 Hepatitis A Inactivated Vaccine Relative Potency Test Method in Vitro General Rules 120
161药典四部-2015 1200 Biological activity assay 1206 Cytochrome C activity assay
297药典四部-2015 3600 Specific biological raw materials-animals 3601 Specific pathogen-free chicken embryo quality testing requirements
239药典四部-2020 3400 Bioassay 3410 Anticomplement Activity Assay
159药典四部-2015 1200 Biological activity assay 1202 Penicillinase and its activity assay
333药典三部-2020 Biological activity-potency assay 3522 human erythropoin biological activity assay in vivo
285药典四部-2015 3500 Biological activity-potency assay 3522 Recombinant human erythropoin in vivo biological activity assay
292药典四部-2020 3500 Biological Activity-Potency Determination Method 3534 Sabin Strain Poliomyelitis Inactivated Vaccine Potency Test
289药典三部-2020 Bioassay 3409 Prokallikrein Activator Assay
245药典四部-2015 3400 Bioassay 3409 Prokallikrein Activator Assay
147药典四部-2020 1200 Biological activity assay 1202 Penicillinase and its activity assay
238药典四部-2020 3400 Bioassay 3409 Prokallikrein Activator Assay
316药典三部-2015 Specific Biological Raw Materials-Animals 3601 Specific Pathogen Free Chicken Embryo Quality Inspection Requirements General Rules 141
149药典四部-2020 1200 Biological activity assay 1206 Cytochrome C activity assay
346药典三部-2020 Specific Biological Raw Materials-Animals 3601 Specific Pathogen Free Chicken Embryo Quality Inspection Requirements General Rules 141
860兽药典一部-2015 Appendix Contents 1200 Biological activity assay 1202 Penicillinase and its activity assay
265药典三部-2015 Bioassays 3410 Anticomplement Activity Assays General 110
160药典四部-2020 1200 Bioactivity Assay 1217 Luteinizing Hormone Bioassay
264药典三部-2015 Bioassay 3409 Prokallikrein Activator Assay General 109
358药典四部-2020 9000 Guidelines 9401 Guidelines for the Validation of Bioactivity/Potency Determination Methods for Biological Products
265药典四部-2015 3500 Biological Activity-Potency Determination Method 3502 Hepatitis A Inactivated Vaccine Relative Potency Test Method in Vitro
303药典三部-2020 Bioassay 3423 Activated coagulation factor activity assay
172药典四部-2015 1200 Bioactivity Assay 1217 Luteinizing Hormone Bioassay
260药典四部-2020 3500 Biological Activity-Potency Determination Method 3502 Hepatitis A Inactivated Vaccine Relative Potency Test Method in Vitro
304药典三部-2015 Biological Activity - Potency Assay 3522 General Rules for In vivo Biological Activity Assay of Recombinant Human Erythropoin 132
280药典四部-2020 3500 Biological activity-potency assay 3522 Recombinant human erythropoin in vivo biological activity assay
246药典四部-2015 3400 Bioassay 3410 Anticomplement Activity Assay
364药典三部-2020 Guiding Principle 9401 Guiding Principles for Validation of Bioactivity/Potency Assay Methods for Biological Products
344药典三部-2020 Biological Activity-Potency Determination Method Efficacy Test of 3534 Sabin Strain Inactivated Poliomyelitis Vaccine
290药典三部-2020 Bioassay 3410 Anticomplement Activity Assay
313药典三部-2020 Biological Activity-Potency Determination Method 3502 Hepatitis A Inactivated Vaccine Relative Potency Test Method in Vitro

Professional Standard - Forestry

LY/T 2615-2016 Test method of wooden activated carbon. Determination of lead content. Atomic absorption spectrometry

Ningxia Provincial Standard of the People's Republic of China

DB64/T 1008-2014 Main Blood Biochemical Indexes and Determination Methods of Tan Sheep
DB64/T 884-2013 Main Blood Biochemical Indexes and Determination Methods of Holstein Dairy Cows

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7181-2000 Measurement of mechanical active substances in railway locomotives
GB/T 12496.1-1999 Test methods of wooden activated carbon-Determination of apparent density
GB/T 12496.14-1999 Test methods of wooden activated carbon-Determination of cyanide
GB/T 43220-2023 Determination of arsenic in solid biofuels
GB/T 7702.1-1997 Determination of moisture in granular activated carbon from coal
GB/T 12496.18-1999 Test methods of wooden activated carbon-Determination of acid-soluble substance
GB/T 36058-2018 Method for analysis of forestry biomas—Determination of insoluble saccharides content
GB/T 23523-2009 Determination of germanium content in germanium renewable raw materials
GB/T 7702.2-1997 Standard test method for particle size distribution of granular activated carbon from coal
GB/T 7702.16-1997 Standard test method for granular activated carbon from coal - Determination of pH value
GB/T 12496.8-2015 Test methods of wooden activated carbon―Determination of iodine number
GB/T 12496.20-1999 Test methods of wooden activated carbon-Determination of zine content
GB/T 12496.16-1999 Test methods of wooden activated carbon-Determination of chloride content
GB/T 12496.17-1999 Test methods of wooden activated carbon-Determination of sulphate
GB/T 28732-2012 Determination of total sulfur in solid biofuels
GB/T 12496.19-1999 Test methods of wooden activated carbon--Determination of iron content
GB/T 15175-1994 Measurement methods for main parameter of solid - State lasers
GB/T 12496.8-1999 Test methods of wooden activated carbon-Determination of iodine number
GB/T 7702.3-1997 Standard test method for hardness of granular activated carbon from coal
GB/T 28734-2012 Determination of carbon and hydrogen in solid biofuels
GB/T 30728-2014 Determination of nitrogen in solid biofuels
GB/T 12496.15-1999 Test methods of wooden activated carbon - Determination of sulphide
GB/T 12496.6-1999 Test methods of wooden activated carbon-Determination of abrasion resistance
GB/T 12496.5-1999 Test methods of wooden activated carbon-Determination of carbon tetrechloride activity
GB/T 30725-2014 Determination of ash composition in solid biofuels
GB/T 12496.22-1999 Test methods of wooden activated carbon-Determination of heavy metals
GB/T 7702.15-1997 Standard test method for granular activated carbon from coal-Determination of ash content
GB/T 12496.4-1999 Test methods of wooden activated carbon-Determination of moisture content
GB/T 12496.21-1999 Test methods of wooden activated carbon-Determination of calcium and magnesium content
GB/T 30726-2014 Determination of ash fusibility of solid biofuels
GB/T 12496.19-2015 Test methods of wooden activated carbon―Determination of iron content
GB/T 5550-1998 Surface active agents--Determination of dispersing power
GB/T 30727-2014 Determination of calorific value for solid biofuels
GB/T 19404-2003 Microwave ferrite components—Measuring methods for major properties
GB/T 12496.2-1999 Test methods of wooden activated carbon-Determination of particle size distribution
GB/T 12496.13-1999 Test methods of wooden activated carbon - Determination of uncarbonized substances
GB/T 15175-2012 Measurement methods for main parameter of solid state lasers
GB/T 11985-1989 Surface active agents--Determination of interfacial tension--Drop volume method
GB/T 12496.7-1999 Test methods of wooden activated carbon-Determination of pH
GB/T 7702.3-2008 Test method for granular activated carbon from coal - Determination of hardness
GB/T 12496.3-1999 Test methods of wooden activated carbon-Determination of ash content
GB/T 28733-2012 Determination of total moisture for solid biofuels
GB/T 30729-2014 Determination of chlorine in solid biofuels

Group Standards of the People's Republic of China

T/CSBM 0026-2022 In vitro mineralization test method of bioactive glass
T/SDAA 025-2021 Rapid detection method of main pathogenic microorganisms in feed-Micro Biology Survey（MBS）
T/QGCML 2993-2024 Determination of water quality biochemical oxygen demand (BOD) in situ microbial film online method
T/CNIA 0116-2021 Determination of impurity content in activated carbon for purification of tail gas from polysilicon production by inductively coupled plasma atomic emission spectrometry

Tianjin Provincial Standard of the People's Republic of China

DB12/T 1212-2023 Quality monitoring method of life service industry

Gansu Provincial Standard of the People's Republic of China

DB62/T 2631-2015 Grass Seed Viability Determination Biochemical (Tetrazolium) Method

Professional Standard - Coal

MT/T 1014-2006 Determination of major and miner elements in coal ash by Inductively Coupled Plasma-Atomic emission spectrometry

Professional Standard - Urban Construction

CJ/T 98-1999 Municipal domestic refuse―Determination of mercury―Cold atomic absorption spectrophotometric method
CJ/T 3018.3-1993 Leachate.Determination of total solids
CJ/T 101-1999 Municipal domestic refuse.Determination of lead.Atomic absorption spectrophotometric method
CJ/T 96-1999 Municipal domestic refuse - Determination of organic matter - Ignition method
CJ/T 100-1999 Municipal domestic refuse―Determination of cadmium―Atomic absorption spectrophotometric method

未注明发布机构

DIN ISO 17155 E:2011-06 Soil quality - Determination of abundance and activity of soil microflora using respiration curves
ISO 13168:2015/Amd 1:2016 Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting
DIN EN ISO 21644 E:2020-02 Method for determination of biomass content of solid recycled fuels (draft)
DIN EN ISO 9698 E:2015-03 Method for determination of sulfur activity concentration in water quality: liquid scintillation counting method (draft)
DIN ISO 17155:2003-06 Soil quality - Determination of abundance and activity of soil microflora using respiration curves

Zhejiang Provincial Standard of the People's Republic of China

DB33/T 2462-2022 Rice Seed Vitality Determination Method

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 2385-2013 Determination of main flavor quality of pear fruit——HPLC method

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1387-2011 Method for determination of calorific value of solid biomass fuel

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37103-2018 Assessment of self-care abilities in daily life for persons with disability
GB/T 39306-2020 Reclaimed water quality—Determination of total arsenic—Atomic fluorescence spectrometry

Professional Standard - Commodity Inspection

SN/T 3447-2012 Detection and identification of strawberry multiplier phytoplasma
SN/T 1599-2005 Determination for major elements in coal ash by ICP-AES
SN/T 2398-2010 Identification of Candidatus Phytoplasma Mali

Professional Standard - Petroleum

SY/T 6472-2000 Method of stipulation of principal energy consumption norm for production of oil field
SY 6472-2010 Compilation Method of Main Energy Consumption Quota for Oilfield Production
SY/T 6472-2010 Method of Stipulation of Principal Energy Consumption Norm for Production of Oil Field

国家能源局

NB/T 10766-2021 Determination of moisture in lignocellulosic feedstocks-Near-infrared method
NB/T 13005-2016 Cellulase evaluation methods for biofuel ethanol preparation
NB/T 10765-2021 Determination of calorific value in lignocellulosic feedstocks-Near-infrared method
NB/T 10764-2021 Determination of ash in lignocellulosic feedstocks-Near-infrared method

Anhui Provincial Standard of the People's Republic of China

DB34/T 3069-2017 Method for Determination of Hydrocarbons in Solid Biomass Fuels-Electrogravimetric Method

Professional Standard - Electricity

DL/T 323-2010 Measurement method for activity of quicklime used in dry flue gas desulfurization
DL/T 2149-2020 Determination of ash fusibility of biomass
DL/T 2147-2020 Determination of clinkering property of biomass
DL/T 2148-2020 Determination of ignition temperature of biomass

Professional Standard - Water Conservancy

SL 354-2006 Water quality.determination of primary productivity."black and white bottle"dissolved oxygen method

Professional Standard - Radio Television Film

GY/T 188-2003 Method for determination of main characteristics of film projection screens

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2984-2018 Method for Determination of Vitality of Maize Hybrid Seeds

Shandong Provincial Standard of the People's Republic of China

DB37/T 4494-2022 Determination of major heavy metals in marine organism—Inductively coupled plasma atomic emission spectrometry method

Professional Standard - Railway

TB/T 3165-2007 Measurement of Mechanical Active Substances in Railway Locomotives

RU-GOST R

GOST R 50595-1993 Surface active agents. Method for determination of biodegradability in aquaous medium
GOST R 54213-2015 Solid biofuels. Determination of major elements
GOST R 54213-2010 Solid biofuels. Determination of major elements
GOST R 54213-2015(2019) Solid biofuels. Determination of major elements
GOST 13056.7-1993 Seed of trees and shrubs. Methods for determination of viability
GOST 13056.7-1968 Seeds of forest and shrub species. Methods for determination of viability
GOST 851.12-1993 Primary magnesium. Method for determination of lead
GOST 851.13-1993 Primary magnesium. Method for determination of zinc
GOST 851.11-1993 Primary magnesium. Method for determination of tin
GOST R 55119-2012 Solid recovered fuels. Methods for the determination of biomass content
GOST R 55130-2012 Solid recovered fuels. Determination of the content of major elements
GOST 30828-2002 Anionic surface-active agents. Methods for determination of active matter
GOST R 55129-2012 Solid recovered fuels-14C-based methods for the determination of the biomass content
GOST 12039-1982 Seed of farm crops. Methods for determination of viability
GOST 33771-2016 Food common salt. Calculation method for determination (measurement) of the principal substance by saline composition
GOST 26028-1983 Dark-coloured raw material for surfactants. Method of determination of an acid value
GOST 33587-2015 Activated carbon. Standard method for determination of adsorptive capacity for adsorbates at trace concentrations
GOST R 54751-2011 Food common salt. Calculation method for determination (measurement) of the principal substance by saline composition
GOST R 51621-2000 The alcohol production and raw material for it producing. Methods for determination of titrating acids
GOST R 54580-2011 Air transport. Requirements and procedures for measuring mass of the aircraft in the operational process. Main principles
GOST R 54580-2011(2019) Air transport. Requirements and procedures for measuring mass of the aircraft in the operational process. Main principles
GOST R 51653-2000 The alcohol production and raw material for it producing. Method of ethyl aicohol determination
GOST 33588-2015 Activated carbon. Standard method for determination of adsorptive capacity
GOST R 50097-1992 Surface active agents. Determination of interfacial tension. Drop volume method
GOST R 51107-1997 Stereophonic broadcasting systems. Main parameters. Methods of measurements
GOST 28607-1990 Essential oil floral-herbal raw material. Methods of impurity determination
GOST 32114-2013 The alcohol production and raw material for it producing. Methods for determination of titrating acids

Korean Agency for Technology and Standards (KATS)

KS C 6563-1996 Principal measuring methods for semiconductor pressure sensor elements
KS C 6563-1996(2021) Principal measuring methods for semiconductor pressure sensor elements
KS C 6563-1996(2016) Principal measuring methods for semiconductor pressure sensor elements
KS C 6563-2021 Principal measuring methods for semiconductor pressure sensor elements
KS M ISO 2071-2002(2012) Aluminium oxide primarily used for the production of aluminium－Determination of zinc content－Flame atomic absorption method
KS M ISO 2069-2002(2012) Aluminium oxide primarily used for the production of aluminium－Determination of calcium content－Flame atomic absorption method
KS I ISO 9698:2008 Water quality-Determination of tritium activity concentration-Liquid scintillation counting method
KS M ISO 2069-2013 Aluminium oxide primarily used for the production of aluminium－Determination of calcium content－Flame atomic absorption method
KS M ISO 3390:2022 Aluminium oxide primarily used for the production of aluminium — Determination of manganese content — Flame atomic absorption method
KS M ISO 2071-2013 Aluminium oxide primarily used for the production of aluminium－Determination of zinc content－Flame atomic absorption method
KS I 3219-2007 Water quality－Determination of surfactants
KS M ISO 697-2023 Surface active agents－Washing powders－Determination of apparent density－Method by measuring the mass of a given volume
KS M ISO 2829-2002(2012) Aluminium oxide primarily used for the production of aluminium－Determination of phosphorus content－Reduced phosphomolybdate spectrophotometric method
KS M ISO 3430-2007(2012) Sodium fluoride primarily used for the production of aluminium－Determination of silica content－Reduced molybdosilicate spectrophotometric method
KS M ISO 9101:2013 Surface active agents－Determination of interfacial tension－Drop volume method
KS M ISO 9101:2007 Surface active agents-Determination of interfacial tension-Drop volume method
KS M ISO 2829-2013 Aluminium oxide primarily used for the production of aluminium－Determination of phosphorus content－Reduced phosphomolybdate spectrophotometric method
KS M 7045-2000(2005) TESTING METHOD FOR LIGNIN IN RAW MATERIALS FOR PULP
KS M ISO 9101-2007(2008) Surface active agents－Determination of interfacial tension－Drop volume method
KS I ISO 9698:2019 Water quality — Determination of tritium activity concentration — Liquid scintillation counting method
KS M ISO 806-2003(2008) Aluminium oxide primarily used for the production of aluminium－Determination of loss of mass at 1 000℃ and 1 200℃
KS M ISO 3430-2013 Sodium fluoride primarily used for the production of aluminium－Determination of silica content－Reduced molybdosilicate spectrophotometric method

AR-IRAM

IRAM 25 583-1957 Method for determination of foam generating power of surfactants
IRAM 25582-1957 Method for determination of wetting power of surfactants

CEN - European Committee for Standardization

PD CEN/TS 15290:2006 Solid Biofuels - Determination of major elements
PD CEN/TS 15440:2006 Solid recovered fuels - Method for the determination of biomass content
PD CEN/TS 15747:2008 Solid recovered fuels - 14C-based methods for the determination of the biomass content
PREN 17035-2018 Surface Active Agents - Bio-based surfactants - Requirements and test methods
EN ISO 9698:2019 Water quality - Tritium - Test method using liquid scintillation counting

SCC

DIN CEN/TS 15290:2006 Solid biofuels - Determination of major elements; German version CEN/TS 15290:2006
SN-CEN/TS 15290:2006 Solid Biofuels — Determination of major elements
AWWA WQTC65824 Methods for Detecting, Identifying and Quantitating Free-Living Amebae in Water
13/30275858 DC BS EN ISO 16967. Solid biofuels. Determination of major elements
DANSK DS/ISO 21644:2021 Solid recovered fuels – Methods for the determination of biomass content
DIN CEN/TS 15440:2007 Solid recovered fuels - Method for the determination of biomass content; German version CEN/TS 15440:2006
NS-EN 15440:2011 Solid recovered fuels — Methods for the determination of biomass content
SN-CEN/TS 15440:2006 Solid recovered fuels — Method for the determination of biomass content
BS 6068-2-2.38:1990 Water quality. Physical, chemical and biochemical methods-Methods for the determination of total chromium by atomic absorption spectrometry
BS 6068-2.45:1993 Water quality. Physical, chemical and biochemical methods-Determination of selenium by atomic absorption spectrometry
BS 6068-45:1993 Water quality. Physical, chemical and biochemical methodsDetermination of selenium by atomic absorption spectrometry
DANSK DS/EN 15440:2011 Solid recovered fuels – Methods for the determination of biomass content
AS 1792:1976 Method for determining the biodegradability of surfactants
BS 6068-5-5.1:1990 Water quality. Biological methods-Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea)
DIN CEN/TS 15148:2006 Solid biofuels - Method for the determination of the content of volatile matter; German version CEN/TS 15148:2005
DIN EN 15440 E:2009 Draft Document - Solid recovered fuels - Method for the determination of biomass content; German version prEN 15440:2009
DANSK DS/EN 61830:1998 Microwave ferrite components - Measuring methods for major properties
NS 3090:1970 Portlandcement — Methods for determination of the main constituents
CEI EN 61830:1998 Microwave ferrite components - Measuring methods for major properties
BS 6068-2-2.23:1986 Water quality. Physical, chemical and biochemical methods-Method for the determination of anionic surfactants by the methylene blue spectrometric method
BS 6829-1.5:1990 Analysis of surface active agents (raw materials). General methods-Methods for determination of water content
BS EN ISO 9698:2015 Water quality. Determination of tritium activity concentration. Liquid scintillation counting method
BS 6829-5-5.1:1987 Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates.-Method for determination of total active matter content
NS 4708:1971 Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 1000 ºC and 1200 ºC
SN-CEN/TS 15747:2008 Solid recovered fuels — 14C-based methods for the determination of the biomass content
DANSK DS/EN ISO 21644:2021 Solid recovered fuels – Methods for the determination of biomass content (ISO 21644:2021)
BS 6829-1-1.4:1989 Analysis of surface active agents (raw materials). General methods-Method for determination of the pH of an aqueous solution
DANSK DS/CEN/TS 17035:2017 Surface Active Agents – Bio-based surfactants – Requirements and test methods
SN-CEN/TS 17035:2017 Surface Active Agents - Bio-based surfactants - Requirements and test methods
BS PD CEN/TS 17035:2017 Surface Active Agents. Bio-based surfactants. Requirements and test methods
BS 6829-3-3.1:1987 Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates.-Method for determination of mean relative molecular mass
DANSK DS/EN ISO 10075-3:2004 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
BS 6068-2-2.21:1985 Water quality. Physical, chemical and biochemical methods-Determination of cadmium: flame atomic absorption spectrometric methods
DIN 58924 E:2021 Draft Document – Haemostaseology – Reference method for the determination of the collagen binding acitvity of the VWF; Text in German and English
DANSK DS/ISO/TS 17379-2:2013 Water quality - Determination of selenium - Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS)
DANSK DS/ISO/TS 17379-1:2013 Water quality - Determination of selenium - Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
BS 6188:1982 Method for determination of cold filter plugging point of diesel and domestic heating fuels

German Institute for Standardization

DIN 58924:2009 Haemostaseology - Reference method for the determination of the collagen binding acitvity of the VWF; Text in German and English
DIN EN 61830:1998 Microwave ferrite components - Measuring methods for major properties (IEC 61830:1997); German version EN 61830:1998
DIN EN 61830:1998-10 Microwave ferrite components - Measuring methods for major properties (IEC 61830:1997); German version EN 61830:1998
DIN EN ISO 9698:2015-12 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010); German version EN ISO 9698:2015 / Note: To be replaced by DIN EN ISO 9698 (2017-04).
DIN EN ISO 6341:2010 Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO/DIS 6341:2010); German version prEN ISO 6341:2010
DIN ISO 697:1984-01 Surface active agents: washing powders; determination of apparent density; method by measuring the mass of a given volume
DIN EN 17035:2018 Surface Active Agents - Bio-based surfactants - Requirements and test methods; German and English version prEN 17035:2018
DIN EN 17035:2021-12 Surface active agents - Bio-based surfactants - Requirements and test methods; German version EN 17035:2021
DIN 58924:2022 Haemostaseology - Reference method for the determination of the collagen binding acitvity of the VWF; Text in German and English
DIN 58924:2021 Haemostaseology - Reference method for the determination of the collagen binding acitvity of the VWF; Text in German and English

TR-TSE

TS 2930-1978 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM - DETERMINATION OF MANGANESE CONTENT - FLAME ATOMIC METHOD
TS 3617-1981 SODIUM FLUORIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — DETERMINATION OF SILICA CONTENT — REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD
TS 1147-1973 AL.UMINTUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM DETERMINATION OF SILICA CONTENT SPECTROPHOTOMETRIC METHOD AS THE REDUCED SILICOMOLYBDATE COMPLEX
TS 1870-1975 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM-DETERMINATION OF LOSS OF MASS AT 1000 °C AND 1200 °C

KR-KS

KS M ISO 3390-2017 Aluminium oxide primarily used for the production of aluminiumDetermination of manganese content-Flame atomic absorption method
KS M ISO 3390-2022 Aluminium oxide primarily used for the production of aluminium — Determination of manganese content — Flame atomic absorption method
KS I ISO 9698-2019 Water quality — Determination of tritium activity concentration — Liquid scintillation counting method

British Standards Institution (BSI)

BS DD CEN/TS 15290:2006 Solid biofuels - Determination of major elements
BS EN 61830:1998 Microwave ferrite components. Measuring methods for major properties
BS ISO 18843:2015 Aluminium oxide primarily used for the production of aluminium. Method for the determination of flow time
BS DD CEN/TS 15747:2008 Solid recovered fuels - 1 4C-based methods for the determination of the biomass content
BS DD CEN/TS 15747:2009 Solid recovered fuels. 1 4C-based methods for the determination of the biomass content
BS EN 15440:2011(2012) Solid recovered fuels — Methods for the determination of biomass content
BS DD CEN/TS 15410:2006 Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
BS ISO 10094-2:2021 Pneumatic fluid power. Electro-pneumatic pressure control valves. Test methods to determine main characteristics to include in the supplier's literature
BS 6068-2.42:1993 Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of sodium by atomic absorption spectrometry
BS 6068-2.43:1993 Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of potassium by atomic absorption spectrometry
BS EN ISO 13162:2015 Water quality. Determination of carbon 14 activity. Liquid scintillation counting method
PD ISO/TS 17379-2:2013 Water quality. Determination of selenium. Method using hydride generation atomic absorption spectrometry (HGAAS)
BS 6068-5.25:1999 Water quality. Biological methods. Determination of the inhibitory effect of water constituents on the growth of activated sludge microorganisms. Section 5.25 Determination of the inhibitory effect of water constituents on the growth of activated sludg...
PD ISO/TS 17379-1:2013 Water quality. Determination of selenium. Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
BS ISO 9698:2010 Water quality. Determination of tritium activity concentration. Liquid scintillation counting method
BS 6829-1.3:1988 Analysis of surface active agents (raw materials). General methods. Method for determination of alkalinity
BS ISO 13168:2023 Water quality. Simultaneous determination of tritium and carbon 14 activities. Test method using liquid scintillation counting
BS ISO 13168:2015(2018) Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting
BS ISO 11271:2002 Soil quality - Determination of redox potential - Field method
BS ISO 13168:2015 Water quality. Simultaneous determination of tritium and carbon 14 activities. Test method using liquid scintillation counting
BS ISO 5782-2:1998 Pnuematic fluid power - Compressed air filters - Test methods to determine the main characteristics to be included in supplier's literature
BS ISO 6301-2:1998 Pneumatic fluid power. Compressed air lubricators. Test methods to determine the main characteristics to be included in supplier's literature
BS 6829-5.1:1990 Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for determination of total active matter content
BS ISO 6301-2:1997 Pneumatic fluid power - Compressed air lubricators - Test methods to determine the main characteristics to be included in supplier's literature
BS EN 17035:2021 Surface active agents. Bio-based surfactants. Requirements and test methods
BS 6829-1.6:1991 Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water
BS EN ISO 17296-3:2016 Additive manufacturing. General principles. Main characteristics and corresponding test methods
BS EN ISO/ASTM 52927:2024 Additive manufacturing. General principles. Main characteristics and corresponding test methods
BS ISO 18842:2015 Aluminium oxide primarily used for the production of aluminium. Method for the determination of tapped and untapped density
BS ISO 10041-2:2010 Pneumatic fluid power. Electro-pneumatic continuous flow control valves. Test methods to determine main characteristics to include in the supplier's literature
BS ISO 6301-2:2018 Pneumatic fluid power. Compressed-air lubricators. Test methods to determine the main characteristics to be included in supplier's literature
BS ISO 22863-8:2021 Fireworks. Test methods for determination of specific chemical substances. Arsenic content by hydride generation atomic fluorescence spectrometry
BS ISO 17378-2:2014 Water quality. Determination of arsenic and antimony. Method using hydride generation atomic absorption spectrometry (HG-AAS)
BS ISO 22863-9:2021 Fireworks. Test methods for determination of specific chemical substances. Mercury content by hydride generation atomic fluorescence spectrometry
BS 6829-3.1:1989 Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates. Method for determination of mean relative molecular mass
BS ISO 5782-2:1997 Pnuematic fluid power. Compressed air filters. Test methods to determine the main characteristics to be included in supplier's literature
BS ISO 10094-2:2010 Pneumatic fluid power. Electro-pneumatic pressure control valves. Test methods to determine main characteristics to include in the supplier's literature
BS ISO 17378-1:2014 Water quality. Determination of arsenic and antimony. Method using hydride generation atomic fluorescence spectrometry (HG-AFS)

Association Francaise de Normalisation

NF X34-120:2011 Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti.
NF X34-120*NF EN ISO 16967:2015 Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
NF ISO 11271:2003 Soil quality - Determination of redox potential - Field method
NF ISO 13168:2015 Water quality - Simultaneous determination of the volume activities of tritium and carbon 14 - Method by counting scintillations in a liquid medium
NF X34-205:2021 Solid recovered fuels - Methods for the determination of biomass content
NF EN ISO 21644:2021 Solid recovered fuels - Method for determining biomass content
NF X34-205:2011 Solid recovered fuels - Methods for the determination of biomass content.
NF M60-826:2012 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method.
NF ISO 9101:1988 Surfactants - Determination of interfacial tension - Drop volume method
NF EN ISO 9697:2019 Water quality - Overall beta activity - Thick source test method
XP CEN/TS 16660:2015 Characterization of waste - Characterization of waste - Leaching behavior tests - Determination of reducing properties and reduction capacity - Determination of reducing properties and reduction capacity...
NF C93-350*NF EN 61830:2000 Microwave ferrite components - Measuring methods for major properties
NF ISO 11465:1994 Soil quality - Determination of dry matter and water weight content - Gravimetric method
NF EN 61830:2000 Ferrite components for microwaves - Methods for measuring the main properties
NF EN 17035:2021 Surfactants - Bio-based surfactants - Requirements and test methods
NF T73-430*NF EN 17035:2021 Surface active agents - Bio-based surfactants - Requirements and test methods

International Organization for Standardization (ISO)

ISO 9698:2010 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
ISO 2069:1976 Aluminium oxide primarily used for the production of aluminium; Determination of calcium content; Flame atomic absorption method
ISO 2071:1976 Aluminium oxide primarily used for the production of aluminium; Determination of zinc content; Flame atomic absorption method
ISO 3390:1976 Aluminium oxide primarily used for the production of aluminium — Determination of manganese content — Flame atomic absorption method
ISO 18843:2015 Aluminium oxide primarily used for the production of aluminium - Method for the determination of flow time
ISO 18142:2014 Carbonaceous materials for the production of primary aluminium - Baked carbon bodies - Determination of the dynamic elasticity modulus by the resonance method
ISO 2829:1973 Aluminium oxide primarily used for the production of aluminium; Determination of phosphorus content; Reduced phosphomolybdate spectrophotometric method
ISO 9101:1987 Surface active agents; Determination of interfacial tension; Drop volume method
ISO 9698:1989 Water quality; determination of tritium activity concentration; liquid scintillation counting method
ISO/ASTM FDIS 52927:2023 Additive manufacturing — General principles — Main characteristics and corresponding test methods
ISO/ASTM 52927:2024 Additive manufacturing — General principles — Main characteristics and corresponding test methods
ISO/FDIS 13168:2023 Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting
ISO 13168:2015 Water quality - Simultaneous determination of tritium and carbon 14 activities - Test method using liquid scintillation counting
ISO 13162:2011 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method
ISO/TS 17379-2:2013 Water quality.Determination of selenium.Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS)
ISO 13162:2021 Water quality - Carbon 14 - Test method using liquid scintillation counting
ISO/TS 17379-1:2013 Water quality.Determination of selenium.Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
ISO/DIS 13168 Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting
ISO 18842:2015 Aluminium oxide primarily used for the production of aluminium - Method for the determination of tapped and untapped density
ISO 3430:1976 Sodium fluoride primarily used for the production of aluminium; Determination of silica content; Reduced molybdosilicate spectrophotometric method
ISO 806:1976 Aluminium oxide primarily used for the production of aluminium; Determination of loss of mass at 1 000 degrees C and 1 200 degrees C
ISO 806:2004 Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300 °C and 1000 °C

HU-MSZT

MSZ 7558-1967 Qualitative requirements for individual elements and their main detection methods

YU-JUS

JUS H.B8.607-1979 Akiminium oxide primarily med for the production of aluminium. Determination of calcium content. Flame atomic absorption method
JUS H.B8.608-1979 Ahiminium oxide primarily used for the production of ahiminium. Determination of zine content. Flame atomic apsorption method
JUS H.B8.614-1979 Aluminium oxide primarily used for the production of aiuminium. Determination ofmanganese content. Flame atomic absorption method
JUS H.B8.613-1979 Aluminium oxide primarily used for the production of aluminium. Determination of sodium content. Flame atomic absorption method
JUS H.B8.611-1979 Ahiminium oxide primarily used for the production of aluminium. Determination of phosphorus content - Reduced phosphomofybdate spectrophotometric method
JUS U.N5.100-1988 Vitreous china sanitary vare. Definition, quality reguirements and methods of test
JUS H.B8.604-1979 Ahiminium oxide primarily used for the production of aluminium. Determination of silicon content. Reduced molybdosilicate spectrophotometric method

BE-NBN

NBN T 03-413-1983 Aluminium oxide primarily used for the production of aluminium - Determination of calcium content - Flame atomic absorption method
NBN T 03-424-1983 Aluminium oxide primarily used for the production of aluminium - Determination of manganese content - Flame atomic absorption method
NBN T 03-415-1983 Aluminium oxide primarily used for the production of aluminium - Determination of zinc content - Flame atomic absorption method
NBN T 03-419-1983 Aluminium oxide primarily used for the production of aluminium - Determination of phosphorus content - Reduced phosphomolybdate spectrophotometric method
NBN T 03-410-1983 Aluminium oxide primarily used for the production of aluminium - Determination oi silica content - Reduced molybdosilicate spectrophotometric method
NBN T 03-466-1983 Sodium fluoride primarily used for the production of aluminium - Determination of silica content - Reduced molybdosilicate spectrophotometric method
NBN T 03-468-1983 Sodium fluoride primarily used for the production of aluminium - Determination of chlorides content - Turbidimetric method
NBN T 03-416-1983 Aluminium oxid primarily used for the production of aluminium - Determination of zinc content - PAN photometric method
NBN T 03-414-1983 Aluminium oxide primarily used for the production of aluminium - Determination of calcium content - Naphthalhydroxamic acid spectrophotometric method

GSO

GSO ISO 3390:2013 Aluminium oxide primarily used for the production of aluminium -- Determination of manganese content -- Flame atomic absorption method
GSO ISO 17994:2015 Water quality -- Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
BH GSO ISO 3390:2016 Aluminium oxide primarily used for the production of aluminium -- Determination of manganese content -- Flame atomic absorption method
OS GSO ISO 3390:2013 Aluminium oxide primarily used for the production of aluminium -- Determination of manganese content -- Flame atomic absorption method
OS GSO ISO 697:2015 Surface active agents -- Washing powders -- Determination of apparent density -- Method by measuring the mass of a given volume
GSO ISO 8655-6:2009 Piston-operated volumetric apparatus - Part 6 : Gravimetric methods for the determination of measurement error
BH GSO ISO 9101:2016 Surface active agents - Determination of interfacial tension - Drop volume method
GSO ISO 697:2015 Surface active agents -- Washing powders -- Determination of apparent density -- Method by measuring the mass of a given volume
OS GSO ISO 13162:2013 Water quality -- Determination of carbon 14 activity -- Liquid scintillation counting method
OS GSO ISO 2829:2013 Aluminium oxide primarily used for the production of aluminium -- Determination of phosphorus content -- Reduced phosphomolybdate spectrophotometric method
GSO ISO 13162:2013 Water quality -- Determination of carbon 14 activity -- Liquid scintillation counting method
BH GSO ISO 2829:2016 Aluminium oxide primarily used for the production of aluminium -- Determination of phosphorus content -- Reduced phosphomolybdate spectrophotometric method
OS GSO ISO 9101:2013 Surface active agents - Determination of interfacial tension - Drop volume method
BH GSO ISO 13162:2016 Water quality -- Determination of carbon 14 activity -- Liquid scintillation counting method
GSO ISO 806:2013 Aluminium oxide primarily used for the production of aluminium -- Determination of loss of mass at 300 degrees C and 1 000 degrees C
GSO ISO 4749:2013 Copper alloys -- Determination of lead content -- Flame atomic absorption spectrometric method
GSO ASTM D4952:2021 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
GSO ISO 9698:2013 Water quality -- Determination of tritium activity concentration -- Liquid scintillation counting method
GSO ISO 10704:2013 Water quality -- Measurement of gross alpha and gross beta activity in non-saline water -- Thin source deposit method
GSO ISO 18842:2021 Aluminium oxide primarily used for the production of aluminium — Method for the determination of tapped and untapped density
BH GSO ISO 9698:2016 Water quality -- Determination of tritium activity concentration -- Liquid scintillation counting method
BH GSO ASTM D4952:2022 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
BH GSO ISO 18842:2022 Aluminium oxide primarily used for the production of aluminium — Method for the determination of tapped and untapped density
OS GSO ISO 3430:2013 Sodium fluoride primarily used for the production of aluminium -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
BH GSO ISO 3430:2016 Sodium fluoride primarily used for the production of aluminium -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
OS GSO ISO/TS 17379-1:2015 Water quality -- Determination of selenium -- Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
GSO ISO/TS 17379-1:2015 Water quality -- Determination of selenium -- Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
BH GSO ISO/TS 17379-2:2017 Water quality -- Determination of selenium -- Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS)
GSO ISO/TS 17379-2:2015 Water quality -- Determination of selenium -- Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS)

American Society for Testing and Materials (ASTM)

ASTM D7427-08 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex
ASTM D7427-16(2021) Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
ASTM D7427-16 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
ASTM E1756-24 Standard Test Method for Determination of Total Solids in Biomass
ASTM D6349-00 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma8212;Atomic Emission Spectrometry
ASTM D6349-01 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma8212;Atomic Emission Spectrometry
ASTM D7483-13 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7483-08 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM D7483-13a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
ASTM E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08 Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08(2015) Standard Test Method for Determination of Total Solids in Biomass
ASTM ISO/ASTM52927-24 Additive manufacturing — General principles — Main characteristics and corresponding test methods
ASTM D6349-13 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasmamdash;Atomic Emission Spectrometry
ASTM D4251-89(1995)e1 Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
ASTM D4251-89(2016) Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration

International Telecommunication Union (ITU)

ITU-T P.80-1993 (WITHDRAWN) Methods for Subjective Determination of Transmission Quality - Telephone Transmission Quality - Subjective Opinion Tests Study Group XII; 24 pp; Cancelled
ITU-T P.911 CORR 1-1999 Subjective Audiovisual Quality Assessment Methods for Multimedia Applications - Corrigendum 1 - Series P: Telephone Transmission Quality Telephone Installations Local Line Networks - Audiovisual Quality in Multimedia Services Study Group 12; 7 pp
ITU-T P.911-1998 Subjective Audiovisual Quality Assessment Methods for Multimedia Applications - Series P: Telephone Transmission Quality Telephone Installations Local Line Networks Audiovisual Quality in Multimedia Services Study Group 12; 27 pp
ITU-T P.910-1999 Subjective Video Quality Assessment Methods for Multimedia Applications - Series P: Telephone Transmission Quality, Telephone Installations, Local Line Networks - Audiovisual Quality in Multimedia Services Study Group 12; 36 pp
ITU-R BT.1788 SPANISH-2006 Methodology for the subjective assessment of video quality in multimedia applications
ITU-R BT.1788 FRENCH-2007 Methodology for the subjective assessment of video quality in multimedia applications
ITU-R BT.1788-2007 Methodology for the subjective assessment of video quality in multimedia applications
ITU-T P.800-1996 Methods for Subjective Determination of Transmission Quality - Series P: Telephone Transmission Quality; Methods for Objective and Subjective Assessment of Quality Study Group 12; 38 pp [Superseded: ITU-T P.80 ITU-T P.80]
ITU-T P.78-1996 Subjective Testing Method for Determination of Loudness Ratings in Accordance with Recommendation P.76 - Telephone Transmission Quality Measurements Related to Speech Loudness Study Group 12; 21 pp

GOSTR

GOST 9679.2-1971 Raw cotton. Method of determining impurities
GOST 34623-2019 Foods for special dietary uses, food biologically active additives. Method for determination of proanthocyanidins
GOST 33815-2016 Wine products and raw materials for it’s production. Method for determination of mass concentration of total and the reduced extract

AT-ON

ONORM ISO 697:1986 Surface active agents; washing powders; determination ofapparent density; method by measuring the mass ofa given volume
OENORM S 2021-2021 Growing media - Quality requirements and test methods

Danish Standards Foundation

DS/ISO 21644:2021 Solid recovered fuels – Methods for the determination of biomass content
DS/EN 15440/AC:2012 Solid recovered fuels - Methods for the determination of biomass content
DS/EN 15440:2011 Solid recovered fuels - Methods for the determination of biomass content
DS/ISO 13162:2012 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method
DS/ISO 9698:2011 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
DS/EN ISO 21644:2021 Solid recovered fuels – Methods for the determination of biomass content (ISO 21644:2021)
DS/EN 12130:1999 Feather and down - Test methods - Determination of the filling power (massic volume)
DS/EN 61830:1998 Microwave ferrite components - Measuring methods for major properties

IT-UNI

UNI EN ISO 21644:2021 Solid recovered fuels - Methods for the determination of biomass content
UNI EN 17035-2021 Surface active agents - Bio-based surfactants - Requirements and test methods

ES-UNE

UNE-EN ISO 21644:2022 Solid recovered fuels - Methods for the determination of biomass content (ISO 21644:2021, Corrected version 2021-03)
UNE-EN ISO 13162:2016 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method (ISO 13162:2011)
UNE-EN 61830:1998 MICROWAVE FERRITE COMPONENTS. MEASURING METHODS FOR MAJOR PROPERTIES. (Endorsed by AENOR in June of 1998.)
UNE-EN 17035:2022 Surface Active Agents - Bio-based surfactants - Requirements and test methods

Lithuanian Standards Office

LST EN 15440-2011/AC-2011 Solid recovered fuels - Methods for the determination of biomass content
LST EN 15440-2011 Solid recovered fuels - Methods for the determination of biomass content
LST EN 12130-2002 Feather and down - Test methods - Determination of the filling power (massic volume)

AENOR

UNE-EN 15440:2012 Solid recovered fuels - Methods for the determination of biomass content
UNE-EN 12130:1999 FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE FILLING POWER (MASSIC VOLUME)
UNE 55516:1989 SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF APPARENT DENSITY. METHOD BY MEASURING THE MASS OF A GIVEN VOLUME.

CZ-CSN

CSN 68 4122-1980 Chelatometric determinations f main substance
CSN 35 8850 Cast.1-1984 Semiconductor radiators. Main parameters of measuring methods
CSN 35 8850 Cast.2-1984 Semiconductor radiation detectors. Main parameters of measuring methods

RO-ASRO

STAS SR ISO 1232:1995 Aluminium oxide primarily used for the production of aluminium -Determination of silica content - Reduced molybdosilicate spectrophotometric method
SR 110-5-1995 Sugar. Methods of analysis. Determination of reducing substances

BELST

STB 1931-2009 Wine production and wine raw material. Methods for determination a mass concentration of titrating acids
STB GOST R 51107-2000 Stereophonic broadcasting systems. Main parameters. Methods of measurements

European Committee for Standardization (CEN)

EN 15440:2011 Solid recovered fuels - Methods for the determination of biomass content (Incorporating corrigendum October 2011)
EN ISO 13162:2021 Water quality - Carbon 14 - Test method using liquid scintillation counting (ISO 13162:2021)
EN 17035:2021 Surface active agents - Bio-based surfactants - Requirements and test methods

IN-BIS

IS 4394-1988 Method for determination of intensity of homogeneous vat dyes
IS 10404-1982 Determination method of cooking quality of raw polished rice

International Electrotechnical Commission (IEC)

IEC 61830:1997 Microwave ferrite components - Measuring methods for major properties

GOST

GOST 34845-2022 Specialized food products, dietary supplements. Method for determining the mass fraction of ash

VN-TCVN

TCVN 6830-2016 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
TCVN 2370-1987 Raw silk.Method for determination of standard mass
TCVN 5565-1991 Beer.Method for determination of original soluble substance
TCVN 5256-2009 Soil quality.Method for the determination of bio-available phosphorus
TCVN 5255-2009 Soil quality.Method for the determination of bio-available nitrogen

BSI

DANSK DS/ISO/ASTM 52927:2024 Additive manufacturing – General principles – Main characteristics and corresponding test methods

PL-PKN

PN-EN ISO 21644-2021-07 E Solid recovered fuels -- Methods for the determination of biomass content (ISO 21644:2021)
PN A74855-06-1987 Sugar Test methods Determination of reducing substances content

Standard Association of Australia （SAA）

AS 4351.1:1996 Biodegradability - Organic compounds in an aqueous medium - Method for determining and reporting biodegradability

CH-SNV

SN EN 17035-2021 Surface active agents - Bio-based surfactants - Requirements and test methods

Others: