Monitor voltage test method

Monitor voltage test method, Total:285 items.

The international standard classification for "Monitor voltage test method" includes: Electricity. Magnetism. Electrical and magnetic measurements , Measurement of electrical and magnetic quantities , Nuclear energy engineering , Radiation protection , Geology. Meteorology. Hydrology , Radiation measurements , Refractories , Environmental testing , Electromagnetic compatibility(EMC) , Electrical accessories , Extraction and processing of petroleum and natural gas , Equipment for petroleum and natural gas industries , Mining and quarrying , Coals , Other standards related to farming and forestry , Occupational safety. Industrial hygiene , Data storage devices in general , Radiographic equipment .

The Chinese standard classification for "Monitor voltage test method" includes: Electromagnetic Measurement , Ionizating Radiation Measurement , Electrical instrument and meter in general , Nuclear instrument and detector in general , Radiation protection instrument , Engineering investigation and geotechnical engineering in general , Nuclear instrument for exploration mining and technological detection , Fireproof material in general , Material composition analysis instrument and environment detection instrument in general , Electromagnetic compatibility , Other electronic instrument and equipment , Technical Management , Technical management , Hydrology and water conservancy instrument , Electrical logging simulation indicating instrument , Petroleum drilling , Petroleum exploration, development, gathering and transportation equipment in general , Solid fuel ore in general , Daily use glass, ceramic, enamel and plastic products in general , Energy in general , Meteorology , Iron ore , Radiological sanitation protection , Magnetic recording material , Medical ultrasound, laser, high-frequency instrument and equipment .

National Metrological Verification Regulations of the People's Republic of China

JJG 795-2016 Withstanding Voltage Testers
JJG 1112-2015 Verification Regulation of Relay Protection Testers
JJG 795-1992 Verification Regulation of Withstanding Voltage Tester
JJG 393-2003 Verification Regulation of X and Gamma Radiation Dose Equivalent (Rate) Meters and Monitors Used in Radiation Protection
JJG 795-2004 Verification Regulation of Withstanding Voltage Testers

Group Standards of the People's Republic of China

T/ITS 0081-2018 Technical requirements and test methods of tire pressure monitoring system for Bus
T/SHNA 0004-2023 Invasive arterial blood pressure monitoring methods
T/ZMDS 10011-2021 Method of measuring the parameters of near-infrared cerebral tissue oximeter
T/ZNZ 044-2020 Method for antibacterial resistance surveillance in livestock and poultry breeding
T/CNTAC 63-2020 Test method for heat resistance of thermal protective fabrics
T/GZJL 1-2023 Calibration method for environmental corrosion monitoring instrument using resistance method
T/HBJLXH 006-2023 Ball pressure tester calibration method
T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
T/QGCML 159-2021 Calibration method of helmet splash resistance molten metal splash tester
T/SDIOT 038-2024 IoT Gas Pressure Monitor
T/HNAEPI 003-2021 Specifications and test procedures for on-line monitoring of thallium for surface water

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 4835-1984 Portable X or gamma radiation doserate meters and monitors for use in radiation protection
GB/T 25003-2010 Electromagnetic environment protection requirements and measurement methods for VHF/UHF band radio monitoring station
GB/T 5202-2008 Radiation protection instrumentation - Alpha beta and alpha/beta (beta energy>60 keV) contamination meters and monitors
GB/T 30150-2013 Radiation Protection Instrumentation - Equipment for Monitoring Airborne Tritium
GB/T 11606.10-1989 The method of environmental test for analytical instruments--Low air pressure test
GB/T 9434-1988 Methods of measurement of gas discharge tubes for overvoltage protection
GB/T 21440.3-2008 Instrument for dam monitoring - Settlement gauge - Part 3：Hydraulic pressure type settlement gauge
GB/T 5072-2023 Refractory products—Determination of cold compressive strength
GB/T 29788-2013 Radiation protection instrumentation—Portable photon contamination meters and monitors
GB/T 5072-2008 Refractories - Determination of cold compressive strength
GB/T 32192-2015 Withstanding voltage tester
GB/T 10261-1988 Test procedures for stabilized d.c high/low voltage power for nuclear instruments

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 1018-2018 Calibration specification for winding turn-to-turn withstand voltage tester
JJF(机械)1018-2018 Calibration specification for winding turn-to-turn withstand voltage tester
JJF 1693-2018 Calibration Specification for Intracranial Pressure Monitors
JJF 1378-2012 Program of Pattern Evaluation of Withstanding Voltage Testers

Professional Standard - Electron

SJ 449-1973 Methods of measurement for voltage with standing test for high-voltage rectifier tubes
SJ/T 11384-2008 General specification of withstanding voltage tester
SJ/T 10298-1991 Test methods for LCR measuring instruments
SJ/T 10300-1991 Test methods for capacitance measuring instruments

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB/J 5415-2005 Verfication regulation for withstanding voltage tester

Professional Standard - Environmental Protection

HJ 762-2015 Specifications and Tast Procedures for Automatic/On-line Monitoring of Lead in Water
HJ/T 10.2-1996 Guideline on management of radioactive environmental Protection electromagnetic radiation monitoring Instruments and Methods
HJ 763-2015 Specifications ans Test Procedures for Automatic/On-line Monitoring of Cadmium in Water
HJ 926-2017 Specifications and test procedures for automatic on-line monitoring of mercury in water
HJ 764-2015 Specifications ans Test Procedures for Automatic/On-line Monitoring of Arsenic in Water
HJ/T 175-2005 Specifications and test procedures for automatic rainfall monitor

Professional Standard - Electricity

DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester
DL 500-1992 Technical conditions for ordering voltage monitors
DL/T 846.13-2020 General technical specifications for high voltage test equipments -Part 13: Arrester monitor tester
DL/T 500-2017 Specification of voltage monitor
DL/T 2350-2021 Technical specification for verification equipment of voltage monitor
DL/T 500-2009 Specification of voltage monitor for order
DL/T 2115-2020 Testing technical specification for voltage monitor

国家能源局

NB/T 42125-2017 Specification for voltage monitor

未注明发布机构

ASTM RR-C16-1013 1988 C0868-Test Method for Chemical Resistance of Protective Linings
ASTM RR-D02-1901 2018 D8184-Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids using a Particle Quantifier (PQ) Instrument
ASTM RR-E37-1050 2010 E2744-Standard Test Method for Pressure Calibration of Thermal Analyzers
DIN EN 530 Berichtigung 1:1995 Abrasion resistance of protective clothing material — test method
SEMI F33-0708-2008 TEST METHOD FOR CALIBRATION OF ATMOSPHERIC PRESSURE IONIZATION MASS SPECTROMETER (APIMS)
ASTM RR-B07-1002 2010 B0648-Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM RR-F23-1011 2019 F2878- Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
ASTM RR-D01-1135 2007 D4060-Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

Professional Standard - Petroleum

SY/T 5623-2009 Prediction and detection methods of formation pressure
SY 6865-2012 Calibration method of pressure filtration loss tester in drilling fluid
SY/T 7074-2016 Calibration method of HTHP drilling fluid filter press
SY/T 6865-2012 Calibration Method of Mid-pressure Drilling Fluid Filter Press
SY 7074-2016 Calibration method of high temperature and high pressure fluid loss tester for drilling fluid

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 25217.4-2019 Methods for test, monitoring and prevention of rock burst—Part 4: Monitoring method of microseismicity
GB/T 25217.8-2021 Methods for test，monitoring and prevention of rock burst-Part 8:Monitoring method of electromagnetic radiation
GB/T 25217.6-2019 Methods for test, monitoring and prevention of rock burst—Part 6: Monitoring method of drilling bits
GB/T 25217.7-2019 Methods for test,monitoring and prevention of rock burst—Part 7:Monitoring method of mining-induced stress
GB/T 25217.5-2019 Methods for test, monitoring and prevention of rock burst—Part 5: Monitoring method of earth-sound
GB/T 25217.12-2019 Methods for test,monitoring and prevention of rock burst—Part 12:Prevention method of protective seam mining

Taiwan Provincial Standard of the People's Republic of China

CNS 14256-1998 Method of test for withstand voltage of personal protective equipment and insulation devices

Professional Standard - Light Industry

QB/T 3724-1999 Inner containers of the vacuum flask--Resistance to vertical load--Test method

Hubei Provincial Standard of the People's Republic of China

DB42/T 401-2006 Verification Criterion Of Voltage Quality Monitoring Meter

工业和信息化部

WJ/T 751-2014 Test method for solvent resistance of glue for optical instruments

Professional Standard - Military and Civilian Products

WJ 751-1994 Test method for solvent resistance of adhesives for optical instruments

Professional Standard - Machinery

JB/T 7480-1994 Current instrument test method
JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
JB/T 7481-1994 Wave Instrument Test Methods

Professional Standard - Forestry

LY/T1287-2012 Monitor and testing method of energy conservation for wood-based panel hot press
LY/T 1287-2012 Monitor and testing method of energy conservation for wood-based panel hot press
LY/T 1287-1998 Monitoring and testing method of energy conservation for wood-based panel hot press

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33693-2017 Test method for ultrasonic anemometer
GB/T 34218-2017 Refractory products--Determination of compressive strength at elevated temperature
GB/T 33691-2017 Test method for cup anemometer

Professional Standard - Ocean

HY/T 269-2018 Testing method of ocean pressure measuring instrument

Occupational Health Standard of the People's Republic of China

GBZ 137-2002 Specifications of radiological protection monitoring for gauges containing sealed radioactive source

Professional Standard - Chemical Industry

HG/T 2353.5-1992 Filter Element for Magnetic Paint Filtration - Method of Test for Compressive Strength
HG/T 4089～4093-2022 Plastic lining equipment hydrostatic test method, electric spark test method, temperature resistance test method, thermal expansion and contraction test method and lining negative pressure test method (2022)

Professional Standard - Medicine

YY/T 1142-2003 Methods of measuring frequency of medical diagnostic and monitoring ultrasonic equipment

Military Standard of the People's Republic of China-General Armament Department

GJB 570.7-1988 Typical test methods for meteorological instruments - barometric pressure measurement sensors
GJB 360.27-1987 Test methods for electronic and electrical components Dielectric withstand voltage test

Professional Standard - Agriculture

QB/T 5993-2024 Insulated containers - test method for pressure resistance performance of glass bottles

Professional Standard - Pharmaceutical Packaging

YBB 0017(03)-2003 Internal Pressure Resistance Determination Method (Trial)

Professional Standard - Aviation

HBm 66.48-1990 Mini-truck - Test Method for Dust Proof and Dust Resistance of Instrument

Professional Standard - Hygiene

WS/T 185-1999 Specifications of radiological protection monitoring for gauges containing sealed radioactive source

Hunan Provincial Standard of the People's Republic of China

DB43/T 2129-2021 Test method for trace carbon residual detector

Korean Agency for Technology and Standards (KATS)

KS B 4092-2014 Hot presses — Test and inspection methods
KS B 4092-1980 Hot presses — Test and inspection methods
KS B 4092-2012 Hot presses-Test and inspection methods
KS B 4092-1987 Hot presses — Test and inspection methods
KS C IEC 61256:2005 Radiation protection instrumentation－Installed monitors for the detection of radioactive contamination of laundry
KS F 2296-1999 Windows and doorsets - Wind resistance test
KS K 0650-1-2022 Test method for color fastness to rubbing : Crock meter method
KS F 2298-2000 Flame retardant testing method for vertical protection mesh
KS C IEC 62303:2014 Radiation protection instrumentation — Equipment for monitoring airborne tritium
KS W 6062-1990 WEATHERABILITY Test methods for aeronautical instrument
KS P 8010-2023 Testing method for withstand voltage of personal protective equipment and insulating devices
KS C IEC 61196-1-106-2014(2019) Coaxial communication cables — Part 1-106: Electrical test methods — Test for withstand voltage of cable sheath
KS L 2325-1996 GLASS CONTAINERS - Internal pressure resistance－Test methods
KS K ISO 13506-2019 Protective clothing against heat and flame－Test method for complete garments－Prediction of burn injury using an instrumented manikin
KS C IEC 62303-2019 Radiation protection instrumentation — Equipment for monitoring airborne tritium
KS A IEC 60325-2022 Radiation protection instrumentation－Alpha, beta and alpha/beta(beta energy＞60 keV) contamination meters and monitors
KS P 8010-2018 Testing method for withstand voltage of personal protective equipment and insulating devices
KS C IEC 62303-2014(2019) Radiation protection instrumentation — Equipment for monitoring airborne tritium
KS A 4523-2000 METHOD OF CALIBRATION FOR CONTINUOUS ENVIRONMENTAL R-RAY MONITORS
KS L 3115-2-2012 Testing method for cold compressive strength of refractory bricks-Part 2:Test with packing
KS L 3115-1-2015 Testing method for cold compressive strength of refractory bricks — Part 1: Test without packing
KS L 3115-1-2010 Testing method for cold compressive strength of refractory bricks-Part 1:Test without packing
KS B 5648-2022 Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS P 8010-1987 Testing method for withstand voltage of personal protective equipment and insulating devices
KS P 8010-2007 Testing method for withstand voltage of personal protective equipment and insulating devices
KS L 3305-2012 Testing method for compressive strength of insulating fire bricks
KS B 5550-2013 Testing method of patable speed measuring instrument
KS L 3305-1982 Testing method for compressive strength of insulating fire bricks
KS L 3305-1987 Testing method for compressive strength of insulating fire bricks
KS C IEC 61172-2020 Radiation protection instrumentation－Monitoring equipment－Radioactive aerosols in the environment
KS C IEC 61171-2020 Radiation protection instrumentation－Monitoring equipment－Atmospheric radioactive iodines in the environment
KS T 1322-2017 Testing method for pressure sensitive adhesive resistance of processed papers for packaging

SE-SIS

SIS SS IEC 650:1981 Nuclear instrumentation - Analogue counting ratemeters - Characteristics and test methods

American National Standards Institute （ANSI)

ANSI N323C-2009 Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments

US-FCR

FCR FED HANDBOOK 51-1957 RADIOLOGICAL MONITORING METHODS AND INSTRUMENTS
FCR COE ER 1110-2-1942-1998 INSPECTION, MONITORING AND MAINTENANCE OF RELIEF WELLS

European Committee for Standardization (CEN)

EN 530:2010 Abrasion resistance of protective clothing material - Test methods
EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
EN 13087-10:2012 Protective helmets - Test methods - Part 10: Resistance to radiant heat

International Electrotechnical Commission (IEC)

IEC 61256:1996 Radiation protection instrumentation - Installed monitors for the detection of radioactive contamination of laundry
IEC 61098:2023 Radiation protection instrumentation - Installed personnel surface contamination monitors
IEC 60325:2002 Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy 60 keV) contamination meters and monitors
IEC 61098:2003 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies
IEC 62303:2008 Radiation protection instrumentation - Equipment for monitoring of airborne tritium

American Society for Testing and Materials (ASTM)

ASTM D4622-86(1993) Standard Test Method for Rock Mass Monitoring Using Inclinometers
ASTM D6230-98 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM E408-71(2002) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E408-71(1996)e1 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM D6230-13 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM F1342-91(1996)e2 Standard Test Method for Protective Clothing Material Resistance to Puncture
ASTM E408-71(2008) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM F1052-20 Standard Test Method for Pressure Testing Vapor Protective Suits
ASTM E408-13 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E1005-10 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
ASTM F1458-15 Standard Test Method for Measurement of Cut Resistance to Chainsaw of Foot Protective Devices
ASTM E1005-15 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
ASTM F1458-04 Standard Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices
ASTM D2670-95(2004) Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

German Institute for Standardization

DIN 19430:2021-05 Protective clothing - Clothing against high-pressure water jets - Requirements and test methods
DIN EN ISO 7458:2004-05 Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004); German version EN ISO 7458:2004
DIN EN 6059-501:2011-06 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test; German and English version EN 6059-501:2010 / Note: Applies in conjunction with DIN EN 6059-100 (2012-03).
DIN EN 863:1995-11 Protective clothing - Mechanical properties - Test method: Puncture resistance; German version EN 863:1995
DIN EN 530:2010-12 Abrasion resistance of protective clothing material - Test methods; German version EN 530:2010
DIN EN 61098:2008 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies (IEC 61098:2003, modified); German version EN 61098:2007

Japanese Industrial Standards Committee (JISC)

JIS P 8114:1994 Testing method for folding endurance of paper and paperboard by schopper tester
JIS B 7996:2018 Performance evaluation test method of automated concentration monitoring instrument of dust in flue gas
JIS T 8010:2001 Testing method for withstand voltage of personal protective equipment and insulating devices
JIS T 8010:1979 Testing method for withstand voltage of personal protective equipment and insulating devices
JIS T 8010:2017 Testing method for withstand voltage of personal protective equipment and insulating devices
JIS R 2658:1995 Testing method for compressive creep of refractory bricks
JIS R 2206:1991 Testing method for cold crushing strength of refractory bricks
JIS A 1515:1994 Test method for wind resistance of windows and doors

CN-STDBOOK

图书 A-4743 Detection technology and application of withstand voltage tester

SCC

DANSK DS/EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test
DIN EN 6059-501 E:2010 Draft Document - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test; German and English version EN 6059-501:2010
BS EN 13087-10:2000 Protective helmets. Test methods-Resistance to radiant heat
CEI IEC 62303:2019 Radiation protection instrumentation - Equipment for monitoring airborne tritium
DIN 19430 E:2020 Draft Document - Protective clothing - Clothing against high-pressure water jets - Requirements and test methods
05/30119049 DC IEC 62363. Radiation protection instrumentation. Portable photon contamination meters and monitors
AS 1635.17.1:1974 Methods of testing pressure sensitive adhesive tape - Resistance to solvent
CAN/CGSB 4.2 No.11.1-1994(R2013) Textile testing methods - Bursting resistance - Membrane burst meter test (Confirmed 2013)
DIN EN 530 E:2008 Draft Document - Abrasion resistance of protective clothing material - Test methods; German version prEN 530:2008
AENOR UNE-EN 863:1996 Protective clothing - Mechanical properties - Test method: Puncture resistance
AWWA ACE95202 Triple Validation Turbidimeter: A New Approach to VLT Monitoring
BS EN 2591-B7:1994 Elements of electrical and optical connection. Test methods-Voltage proof test
AS 2925.5:1987 Methods of testing thermosetting laminated sheet, Method 5: Method for determining resistance to dry heat
DIN VDE 0493-100 E:2008 Draft Document - Radiation protection instrumentation - Periodic testing of portable contamination monitoring assemblies
BS IEC 60325:2002 Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors
BS IEC /IEEE 62582-2:2022 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods-Indenter measurements
UNE-EN 13087-10:2001 PROTECTIVE HELMETS. TEST METHODS. PART 10: RESISTANCE TO RADIANT HEAT.
AS 1580.483.1:1973 Paints and related materials - Methods of test, Method 483.1: Resistance to artificial weathering (carbon-arc type instruments)
AASHTO T 254-1980(2004) Standard Method of Test for Installing, Monitoring, and Processing Data of the Traveling Type Slope Inclinometer
AS 2925.3:1987 Methods of testing thermosetting laminated sheet, Method 3: Method for determining resistance to surface wear
AS 1774.1:1991 Refractories and refractory materials - Physical test methods, Method 1: Determination of cold compressive strength
NS-EN 530:1994 Abrasion resistance of protective clothing material — Test methods
AS 1635.15.1:1974 Methods of testing pressure sensitive adhesive tape - Dielectric breakdown and proof voltage
AS 1774.1:1981 Refractories and refractory materials - Physical test methods, Method 1: The determination of cold compressive strength
NS-EN ISO 7458:2004 Glass containers — Internal pressure resistance — Test methods (ISO/FDIS 7458:2004)
AS 2925.4:1987 Methods of testing thermosetting laminated sheet, Method 4: Method for determining resistance to immersion in boiling water
AS 1774.1:1976 Methods for physical testing of refractories and refractory materials, Method 1: The determination of cold compressive strength
AS Z24.17.1:1968 Methods of test for pressure sensitive adhesive tapes, Method 17.1: Resistance to solvents - Resistance to solvent
CSA R101-2022 Automated hydrometeorological monitoring stations: Site selection, instrument installation, and instrument maintenance
NS-EN 369:1993 Protective clothing — Protection against liquid chemicals — Test method: Resistance of materials to permeation by liquids
AENOR UNE-EN 530:2011 Abrasion resistance of protective clothing material - Test methods
NS-EN 530:2010 Abrasion resistance of protective clothing material — Test methods
DANSK DS/EN 530:2010 Abrasion resistance of protective clothing material - Test methods
DANSK DS/EN 60325:2004 Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy less than 60 keV) contamination meters and monitors
AS Z24.17.1:1970 Methods of test for pressure sensitive adhesive tapes, Method 17.1: Resistance to solvents - Resistance to solvent
AS 2925.11:1987 Methods of testing thermosetting laminated sheet, Method 11: Method for determining resistance to cigarette burns

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std N323C-2009 (New Standard) American National Standard for Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments
IEEE Std N323C-2009 American National Standard for Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments
IEEE N323C-2009 American National Standard Radiation Protection Instrumentation Test and Calibration Air Monitoring Instruments

Standard Association of Australia （SAA）

AS 1774.1:2000 Refractories and refractory materials - Physical test methods - Determination of cold compressive strength
AS/NZS ISO 16900.10:2022 Respiratory protective devices — Methods of test and test equipment, Part 10: Resistance to ignition, flame, radiant heat and heat
AS/NZS 4503.2:1997 Protective clothing - Protection against liquid chemicals - Test method: Determination of resistance to penetration by a jet of liquid (Jet test)

GSO

GSO ISO 7458:2011 Glass containers – internal pressure resistance - test methods
OS GSO ISO 7458:2011 Glass containers – internal pressure resistance - test methods
DL/T 500-1992 Voltage monitor ordering technical conditions
GSO ISO 17491-1:2017 Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 1: Determination of resistance to outward leakage of gases (internal pressure test)
OS GSO ISO 17491-1:2017 Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 1: Determination of resistance to outward leakage of gases (internal pressure test)
GSO ISO 15025:2008 Protective clothing -- Protection against heat and flame -- Method of test for limited flame spread
GSO OIML R145-2:2021 Ophthalmic instruments – Impression and applanation tonometers – Part 2 – Test methods
BH GSO OIML R145-2:2022 Ophthalmic instruments – Impression and applanation tonometers – Part 2 – Test methods

Association Francaise de Normalisation

NF EN ISO 7458:2004 Glass containers - Resistance to internal pressure - Test methods
NF EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protective sheaths - Test methods - Part 501: voltage withstand
NF EN 863:1996 Protective clothing - Mechanical properties - Test method: puncture resistance
NF ISO 17491-1:2012 Protective clothing - Test methods for clothing providing protection against chemicals - Part 1: determination of resistance to external gas leakage (internal pressure test)
NF C19-100*NF EN 60325:2004 Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors
NF EN 530:2010 Abrasion resistance of protective clothing material - Test methods
NF S74-505:1993 Protective clothing. Protection against heat and flames. Test method : determination of the heat transmission on exposure to flame.
NF EN IEC 61098:2024 Instrumentation for radiation protection - Fixed monitors for monitoring personnel surface contamination

ES-UNE

UNE-EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test (Endorsed by AENOR in May of 2010.)

KR-KS

KS P 8010-2018(2023) Testing method for withstand voltage of personal protective equipment and insulating devices

RO-ASRO

STAS SR ISO 7458:1995 Glass containers - Internai pressure resistance - Test methods
STAS 12912-1990 Radiation detectors for the instrumentation and protection of nuclear reactors. Characteristics and test methods

British Standards Institution (BSI)

BS EN IEC 61098:2024 Radiation protection instrumentation. Installed personnel surface contamination monitors
BS EN 863:1996(1999) Protective clothing — Mechanical properties — Test method : puncture resistance
BS EN 60325:2004 Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy 60 keV) contamination meters and monitors
BS EN 13274-3:2001 Respiratory protective devices - Methods of test - Determination of breathing resistance
BS EN 13087-7:2000(2002) Protective helmets. Test methods. Flame resistance
BS ISO 11073-90101:2008 Health informatics - Point-of-care medical device communication - Analytical instruments - Point-of-care test
BS EN 13087-7:2000 Protective helmets. Test methods. Flame resistance
BS EN 50980-1:2019 Remote alcohol monitoring devices. Test methods and performance requirements - Instruments for assessment programmes
BS EN 13087-10:2012 Protective helmets. Test methods. Resistance to radiant heat
BS ISO 15025:2000 Protective clothing - Protection against heat and flame - Method of test for limited flame spread
BS EN 369:1993(1999) Protective clothing — Protection against liquid chemicals — Test method : Resistance ofmaterials to permeation by liquids
BS IEC/IEEE 62582-2:2022 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Indenter measurements
BS EN 60846-1:2014 Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation. Portable workplace and environmental meters and monitors
BS ISO 16900-14:2020 Respiratory protective devices. Methods of test and test equipment - Measurement of sound pressure level

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 61098:2024 Radiation protection instrumentation - Installed personnel surface contamination monitors
EN 62363:2011 Radiation protection instrumentation - Portable photon contamination meters and monitors

VDI - Verein Deutscher Ingenieure

VDI 3489 Blatt 7-1995 Particulate matter measurement - Methods for characterizing and monitoring test aerosols - Inertial spectrometer
VDI 3489 Blatt 7-1994 Particulate matter measurement - Methods for characterization and monitoring of test aerosols - Inertial spectrometer
VDI 3489 Blatt 4-1994 Particulate matter measurement - Methods for characterization and monitoring of test aerosols - Electrical aerosol analyzer
VDI 3489 Blatt 8-1995 Particulate matter measurement - Methods for characterization and monitoring of test aerosols - Time of flight spectrometer

Canadian General Standards Board （CGSB)

CAN/CGSB-4.2 NO.26.5-M89-1989 Textile Test Methods Water Resistance - High-Pressure Penetration Test
CGSB 4.2 NO 26.3-2010-CAN/CGSB-2010 Methods for testing textile fabrics - Determination of resistance to water penetration - Hydrostatic pressure testing

GOST

GOST R 50241-2021 Wood protective substances. Express method of tests for washing out

Lithuanian Standards Office

LST EN 863-1999 Protective clothing - Mechanical properties - Test method: Puncture resistance
LST EN 1534-2011 Wood flooring - Determination of resistance to indentation - Test method
LST EN ISO 7458:2004 Glass containers - Internal pressure resistance - Test methods (ISO/FDIS 7458:2004)
LST EN 530-2010 Abrasion resistance of protective clothing material - Test methods

Danish Standards Foundation

DS/EN 863:1996 Protective clothing - Mechanical properties - Test method: Puncture resistance
DS/EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method
DS/EN 62363:2011 Radiation protection instrumentation - Portable photon contamination meters and monitors
DS/EN 530:2010 Abrasion resistance of protective clothing material - Test methods

AENOR

UNE-EN 863:1996 Protective clothing - Mechanical properties - Test method: Puncture resistance
UNE-EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method
UNE-EN ISO 7458:2004 Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004)
UNE-EN 530:2011 Abrasion resistance of protective clothing material - Test methods
UNE 103602:1996 TEST METHOD FOR ONE-DIMENSIONAL SWELL PRESSURE OF A SOIL IN CONSOLIDOMETER.

PL-PKN

PN G04026-1987 Liquids applied in hydraulik systems of mining machinery and equipment Tesi methods and fire resistant evaluation
PN E04063-11-1987 On-load tap-changers Test methods Mechanical endurance test

Electronic Industrial Alliance (U.S.)

EIA RS-186-4E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC CQMPONENT PARTS METHOD 4: DIELECTRIC TEST (WITHSTAND VOLTAGE)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 6059-501-2009 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 501: Voltage proof test (Edition P 1)

RU-GOST R

GOST ISO 13402-2011 Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure. Test methods
GOST 30630.1.8-2002 Test methods for resistance to environmental factors of machines, instruments and other articles. Time-history vibration tests

NZ-SNZ

AS/NZS 1580.403.2:1994 Paints and Related Materials - Methods of Test Method 403.2: Abrasion Resistance - Taber Abraser

Electronic Components, Assemblies and Materials Association

ECA 186-4E-1978 Passive Electronic Component Parts, Test Methods for; Method 4: Dielectric Test (Withstanding Voltage)

HU-MSZT

MSZ KGST 2566-1980 General industrial requirements and test methods for differential pressure measuring instruments

Association of German Mechanical Engineers

VDI 3489 Blatt 8-1996 Particulate matter measurement - Methods for characterizing and monitoring test aerosols - Time-of-flight spectrometer

AASHTO - American Association of State Highway and Transportation Officials

T 254-1980 Standard Method of Test for Installing@ Monitoring@ and Processing Data of the Traveling Type Slope Inclinometer

Indonesia Standards

SNI 19-6463-2000 Method for calibration of bourdon manometers by dead weight tester

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0493-2-4-2012 Radiation protection instrumentation - Portable photon contamination meters and monitors (IEC 62363:2008@ modified); German version EN 62363:2011
VDE 0493-100-2010 Strahlenschutz-Messgeraete - Teil 100: Wiederkehrende Pruefung von tragbaren Kontaminationsmonitoren

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO TP-06002-2007 TPMS(Tire Pressure Monitoring System)実車試験方法の検討

PT-IPQ

NP EN 530-2000 Abrasion resistance of protective clothing material Test methods

SG-SPRING SG

SS 78 Pt.A16-1987 Testing Concrete Part A16 : Method For Determination Of Compressive Strength

Others: Insulation withstand voltage test method