Internal and external inspection

Internal and external inspection, Total:154 items.

The international standard classification for "Internal and external inspection" includes: Pipeline components and pipelines in general , Non-destructive testing , Welded joints , Plain bearings , Temperature-measuring instruments , Petroleum products and natural gas handling equipment , Identification cards and related devices , Power stations in general , Equipment for the chemical industry , Protection of and in buildings in general , Internal combustion engines .

The Chinese standard classification for "Internal and external inspection" includes: X ray, magnetic powder, fluorescent light and other defectoscope , Basic standards and general methods , Length Measurement , Chemical Measurement , Metal nondestructive testing method , Welding and cutting , Sliding bearing , Temperature and pressure instrument , Oil and gas gathering and transportation equipment , Petroleum exploration, development, gathering and transportation engineering in general , Data medium , Electric power testing technique , Machinery for rubber and plastic , Architectural physics , Piston type internal combustion engine and other power equipment in general .

Group Standards of the People's Republic of China

T/CAQI 143-2020 Indoor environment comfort detector
T/CECS 698-2020 Indoor PM2.5 detection equipment performance inspection standard
T/CQTAH 001-2022 On-the-spot inspection and testing standard for pullout resistance of anchor bolts used for external wall insulation
T/CASMES 46-2022 Automatic detection system of appearance defects for tubular yarn
T/CIPR 082-2023 Automatic test tube inner wall cleaning machine
T/GDCKCJH 094-2024 Internal surface testing - UV ultraviolet fluorescence endoscope method
T/QGCML 1057-2023 Design specifications for automobile interior and exterior trim inspection tools
T/LZZLXH 063-2021 Internal Calibration Specifications for Inspection and Testing Laboratories
T/CAB 0276-2023 Smart indoor environmental sensing device
T/GDNB 225-2024 Non-destructive testing of pomelo internal quality by visible/near-infrared spectroscopy
T/CASME 849-2023 Technical requirements for indoor air detection
T/CAQI 176-2021 Guidelines for Internal Verification of Inspection and Testing Institutions Fulfilling Informed Commitments
T/CASEI 021-2023 Test and evaluation for In-line inspection tool of oil & gas pipeline— Part 2: Magnetic flux leakage detector
T/CSTM 00424-2023 Non-destructive testing -- Steel products-Characterization and verification ofautomatic infrared thermography flaw detector

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34350-2017 External inspection methodology for internal corrosion of liquid petroleum pipelines
GB/T 33886-2017 Non-destructive testing instruments--Industrial electronic endoscopic detector
GB/T 33887-2017 Non-destructive testing instruments--Industrial optical fiber endoscope detector
GB/T 33207-2016 Non-destructive testing--Test method for the accumulation of oxide scale in the metal tube in service by magnetic testing
GB/T 31768.2-2015 Non-destructive testing―Infrared flash thermography―Part 2:Practice
GB/T 34349-2017 External inspection methodology for internal corrosion of natural gas pipelines

National Metrological Verification Regulations of the People's Republic of China

JJG 471-2003 Verification Regulation of Bearing Inside and Outside Diameter Testers
JJG 871-1994 Verification Regulation of Far Infra Conditioned Instrument for Inspecting Moisure of Rew Silk
JJG(机械) 195-1997 Verification rules for extra large bearing inner and outer diameter inspection tools
JJG(建材) 133-1999 Appearance quality inspection device

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12604.9-1996 Terminology for nondestructive testing-Infrared testing
GB/T 29711-2023 Non-destructive testing of welds—Ultrasonic testing—Characterization of discontinuities in welds
GB/T 41856.1-2022 Non-destructive testing—Industrial endoscopy visual testing—Part 1：Method
GB/T 31768.4-2015 Non-destructive testing―Infrared flash thermography―Part 4:System
GB/T 19870-2005 Idustrial inspecting thermal imagers
GB/T 43413-2023 Non-destructive testing—Infrared thermographic testing—General principles for thermoelastic stress measuring method
GB/T 12613.2-2002 Plain bearings--Wrapped bushes--Part 2:Test data for outside and inside diameter
GB/T 41856.1-2022(英文版) Non-destructive testing. Visual inspection by industrial endoscope. Part 1: Method
GB/T 27699-2011 Steel pipeline in-line inspection technical specification
GB/T 41856.2-2022 Non-destructive testing—Industrial endoscopy visual testing—Part 2: Atlas
GB/T 28706-2012 Non-destructive testing—Test method for mechanical and electrical equipment with infrared thermography
GB/T 12613.2-2011 Plain bearings—Wrapped bushes—Part 2:Test data for outside and inside diameters
GB/T 27699-2023 Technical specification for in-line inspection of steel pipeline
GB/T 12604.9-2008 Non-destructive testing - Terminology - Terms used in infrared testing

Professional Standard - Petroleum

SY/T 6889-2012 In-line Inspection of Pipelines
SY/T 6825-2011 In-line Inspection Systems Qualification
SY/T 6597-2004 Technical standard of intelligent pigging on steel pipeline
SY/T 6597-2014 Specification of in-line inspection for oil and gas pipeline

Beijing Provincial Standard of the People's Republic of China

DB11/T 2325-2024 Technical regulations for inspection and testing of building exterior wall insulation projects

Military Standard of the People's Republic of China-General Armament Department

GJB 9374-2018 Ceramic shell appearance inspection method

Shanxi Provincial Standard of the People's Republic of China

DB1404/T 15-2021 Management Requirements for Inspection and Testing Institutions Opening to the Outside World
DB1404/T 14-2021 Management requirements for foreign personnel of inspection and testing institutions

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38883-2020 Non-destructive testing一Active thermographic testing method
GB/T 19870-2018 Industrial inspecting thermal imagers
GB/T 12604.9-2021 Non-destructive testing—Terminology—Infrared thermography

Professional Standard - Electron

SJ 1550-1979 Method of inspection for silicon epitaxial wafers

Professional Standard - Labor and Labor Safety

LD/T 6001.3-2023 Test specifications for social security card-Part 3: Test of the universality of data structure and key loading
LD/T 6001.2-2023 Test specifications for social security card-Part 2: Test of card operation system

Professional Standard - Traffic

JT/T 1012-2015 Detecting Instrument for Contour Dimensions of Vehicle

Professional Standard - Electricity

DL/T 2465-2021 Test specification of indoor rail-based inspection robot system in substation
DL/T 907―2004 Guidelines for Infrared Detection of Thermal Equipment
DL/T 907-2004 Guide for infrared inspection of thermal power equipments

Professional Standard - Chemical Industry

HG/T 3231-2003 Testing and measuring methods for tube curing press

未注明发布机构

JEDEC JESD400-5A.01-2023 DDR5 Serial Presence Detect (SPD) Contents

Professional Standard - Construction Industry

JG/T 269-2010 Building infrared thermographic inspection requirement

Professional Standard - Machinery

JB/T 9744-2010 Internal combustion engines - Magnetic particle inspection for parts and commponents

Taiwan Provincial Standard of the People's Republic of China

CNS 973-1996 Method of Test for Canned Food-Inspection for Interior of Can
CNS 969-1996 Method of Test for Canned Food-Appearance of Can
CNS 8214-1983 Testing Method of Outside and Inside Diameters Wrapped Bushes for Plain Bearing

国家质量监督检验检疫总局

SN/T 4906-2017 Determination of alkylphenol disulfide in rubber - High performance liquid chromatography-ultraviolet detection method

Yunnan Provincial Standard of the People's Republic of China

DB53/T 681-2015 Testing Laboratory Internal Calibration Specifications

国家能源局

SY/T 6597-2018 Specification for in-line inspection of oil & gas pipeline

工业和信息化部

JB/T 13464-2018 Non-destructive testing-Infrared flash thermography-Testing for honeycomb sandwich structure

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1327.13-2023 Qualification Certification of Inspection and Testing Institutions Part 13: Internal Calibration Requirements
DB61/T 1327.7-2020 Part 7 Internal Audit Requirements for Qualification Accreditation of Inspection and Testing Institutions

European Committee for Standardization (CEN)

EN 970:1997 Non-Destructive Examination of Fusion Welds - Visual Examination
EN 1330-10:2003 Non-destructive testing - Terminology - Part 10: Terms used in visual testing

Society of Automotive Engineers (SAE)

SAE J359-1991 Infrared Testing
SAE J1589-1998 Internal Combustion Engines Piston Rings Inspection Measuring Principles

SAE - SAE International

SAE J359-2018 Infrared Testing
SAE J1589-2008 Internal Combustion Engines - Piston Rings - Inspection Measuring Principles
SAE J1589-1990 INTERNAL COMBUSTION ENGINES - PISTON RINGS - INSPECTION MEASURING PRINCIPLES

HU-MSZT

MSZ 13555/2-1970 Fuse detection method. Shape inspection
MSZ 15803/1-1982 Chemical testing of enameled wire. Content detection
MSZ 9697-4.lap-1960 Fruit detection shape; size; weight detection
MSZ 3227/16-1981 Wool detection method internal structure detection
MSZ KGST 1031-1978 Wooden door detection detection mode. Content content definition
MSZ 14043/8-1981 Land machinery inspection. Land shape change detection
MSZ 9611/3-1982 Asphalt testing. Sample preparation and external feature detection
MSZ 18289/7-1980 Durability testing of construction stones. UV and IR inspection
MSZ 14800/5-1988 Combustion detection. Door and interior glass surface burn range detection
MSZ 7482/5-1981 Fading detection under UV irradiation to test adhesives
MSZ 12050/8.lap-1968 Definition and testing content of latex
MSZ 5185-1971 Excavation equipment. Check the lining inspection of threaded pipes on the formwork
MSZ KGST 301-1976 Shape and fixed product content detection
MSZ 11433/10.lap-1968 Definition of cosmetic cream testing content

Military Standards (MIL-STD)

DOD A-A-54620-1992 ARTHROSCOPIC SYSTEM, SURGICAL, 4 MM
DOD A-A-54252-1990 SURGICAL PACK, DISPOSABLE (ARTHROSCOPIC)

Association Francaise de Normalisation

NF E03-164:1986 Pipe threads. Checking of parallel pipe threads with limit gauges. Plain gauges for external and internal screw threads.
NF C48-226:1987 Intrusion detection - Active infra-red detectors - Specific standard.
NF C48-231:1988 Intrusion detection - Motion detectors,passive infrared - Specific standard
NF A89-540:1997 Non-destructive examination of fusion welds. Visual examination.
NF A04-307:1981 IRON AND STEEL. ULTRASONIC INTERNAL DEFECT DETECTION IN LONG PRODUCTS EXCLUDING BEAMS,RAILS AND SIMILAR SECTION (MANUAL INSPECTION).
NF D14-505:1987 Sanitary appliances. Aspect checking of enamelled surfaces. Test method.
NF A09-050/A1:2004 Non-destructive testing - Visual testing - General principles.
NF C96-500-2*NF EN 165000-2:1996 Film and hybrid integrated circuits - Part 2 : internal visual inspection and special tests

German Institute for Standardization

DIN 68872:1976 Plastic Chair Shells for Indoor Use; Requirements, Testing
DIN EN 1330-10:2003 Non-destructive testing - Terminology - Part 10: Terms used in visual testing; Trilingual version EN 1330-10:2003
DIN 54018-1:2023-12 Non-destructive testing - Eddy current testing for testing of heat exchanger tubes from the inside - Part 1: General principles
DIN-Fachbericht 74:1999 FZG gear pretension testing machine internal gear liquid grease inspection
DIN 54018-1:2023-06 Non-destructive testing - Eddy current testing for inspection of heat exchanger tubes from the inside - Part 1: General principles / Note: Date of issue 2023-05-19

Korean Agency for Technology and Standards (KATS)

KS B ISO 10880:2020 Non-destructive testing — Infrared thermographic testing — General principles
KS P ISO 9583-2009(2019) Implants for surgery－Non-destructive testing－Liquid penetrant inspection of metallic surgical implants
KS P ISO 16256:2017 Clinical laboratory testing and in vitro diagnostic test systems ─ Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
KS P ISO 9584-2009(2019) Implants for surgery－Non-destructive testing－Radiographic examination of cast metallic surgical implants
KS B ISO 10878:2020 Non-destructive testing — Infrared thermography — Vocabulary
KS C 3802-1985 Permissible limits of visual defects for insulating porcelains
KS C 3802-1977 Permissible limits of visual defects for insulating porcelains

KR-KS

KS B ISO 10880-2020 Non-destructive testing — Infrared thermographic testing — General principles
KS B ISO 3547-6-2018(2023) Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter
KS P ISO 16256-2017 Clinical laboratory testing and in vitro diagnostic test systems ─ Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
KS B ISO 10878-2020 Non-destructive testing — Infrared thermography — Vocabulary

GSO

GSO ISO 10880:2021 Non-destructive testing — Infrared thermographic testing — General principles
BH GSO ISO 10880:2022 Non-destructive testing — Infrared thermographic testing — General principles
NB/T 47013.16-2024 Nondestructive testing of pressure equipment Part 16: Infrared thermal imaging testing

International Organization for Standardization (ISO)

ISO 10880:2017 Non-destructive testing - Infrared thermographic testing - General principles
ISO 21195:2020 Ships and marine technology — Systems for the detection of persons while going overboard from ships (man overboard detection)
ISO/DIS 9584.2 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants

Association of German Mechanical Engineers

DVS 2303-2-1995 Non-destructive testing of thermal spray coatings - internal feature detection
DVS 2303-2-2003 Non-destructive testing of thermal spray coatings - internal feature detection
DVS 2303-2-2011 Non-destructive testing of thermal spray coatings - internal feature detection

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 63180:2020 Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection

YU-JUS

JUS B.B8.103-1982 Testing of mineral filler. The determination of external appearance
JUS E.L8.006-1980 Determiriation ofethanol by enzymatic method (UV-test)
JUS E.L8.013-1980 Determination of starch by enzymatic method (UV -test)

SCC

BS 3889-1A:1965 Methods for non-destructive testing of pipes and tubes. Ultrasonic testing of ferrous pipes (excluding cast)
DANSK DS/ISO 9583:2015 Implants for surgery - Non-destructive testing - Liquid penetrant inspection of metallic surgical implants
DIN 54018-1 E:2023 Draft Document - Non-destructive testing - Eddy current testing for inspection of heat exchanger tubes from the inside - Part 1: General principles
VDI 4300 BLATT 10-2008 Measuring indoor air pollution — measurement strategies for detecting mold in indoor spaces
DIN 54018-1:2023 Non-destructive testing - Eddy current testing for testing of heat exchanger tubes from the inside - Part 1: General principles

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-B101A-2004 External Visual

Lithuanian Standards Office

LST EN IEC 63180:2020 Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection (IEC 63180:2020)
LST EN 165000-2-2001 Film and hybrid integrated circuits. Part 2: Internal visual inspection and special tests

Japanese Industrial Standards Committee (JISC)

JIS Z 3090:2022 Visual testing method of fusion-welded joints

SE-SIS

SIS SS-IEC 1032:1992 Testprobes to verify protection by enclosures

CZ-CSN

CSN 73 2035 Z1-1993 Detecting construction content through impact

American Society for Testing and Materials (ASTM)

ASTM E493/E493M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM RR-D02-1231 1988 D1552-Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM E493/E493M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM RR-D02-1838 2016 D1552-Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM RR-D02-2048 2023 D1552-Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM D1552-23 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)

British Standards Institution (BSI)

BS EN 16729-2:2020 Railway applications. Infrastructure. Non-destructive testing on rails in track - Eddy current testing of rails in track
BS EN ISO 10893-2:2011+A1:2020 Non-destructive testing of steel tubes - Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BS EN ISO 29701:2010 Nanotechnologies. Endotoxin test on nanomaterial samples for in vitro systems. Limulus amebocyte lysate (LAL) test

CN-STDBOOK

图书 3-8543 Industrial endoscope visual inspection map

Indonesia Standards

SNI 16-7060-2004 The measurement of ultraviolet ray radiation at work places

BR-ABNT

ABNT NBR 14658-2001 Internal bonding tester detects internal fiber viscosity

Danish Standards Foundation

DS/EN 165000-2:1997 Film and hybrid integrated circuits - Part 2: Internal visual inspection and special tests

VDI - Verein Deutscher Ingenieure

VDI/VDE/DGQ 2618 Blatt 9.1-2005 Inspection of measuring and test equipment - Test instruction for callipers for external@ internal and depth dimensions

Others: Indoor and outdoor environment detection,X fluorescence detection at home and abroad,Natural rubber inspection and testing,First inspection, middle inspection,Food safety testing at home and abroad,Indoor and outdoor multi-component gas detection,Internal and external inspection,Pesticide residue detection at home and abroad,China Inspection and Testing,Internal and external inspection,Indoor detection system at home and abroad,China Inspection and Testing,Internal and external inspection of samples,What does the oil smoke test check?,Exosome detection at home and abroad,Food testing at home and abroad,Internal and external inspection of samples,Indoor and outdoor infrared detectors,Chip testing at home and abroad,Special equipment testing at home and abroad