Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)

Thorium catalyst

Thorium catalyst, Total:491 items.

The international standard classification for "Thorium catalyst" includes: Wastes in general , Other products of the chemical industry , Surface active agents , Other organic chemicals , Products of the chemical industry in general , Thermoplastic materials , Other non-ferrous metals and their alloys , food products in general , Salts , Cadmium, cobalt and their alloys , Other equipment for the chemical industry , Medicaments .

The Chinese standard classification for "Thorium catalyst" includes: Basic standards and general methods for chemical additive , Basic standards and general methods for catalyst , Standardization and quality management , Catalyst , Chemical additive , Rare metals and their alloys , Foods fermentation and brewing in general , Rare metals and their alloys analysis method , Petroleum products in general , Precious metals and their alloys , Rare refractory metals and their compounds , Hygiene, safety and labor protection .


Military Standard of the People's Republic of China-General Armament Department

Professional Standard - Energy

  • NB/SH/T 0950-2017 Standard test method for determination of lanthanum oxide and cerium oxide in catalytic cracking catalysts by X-ray fluorescence spectrometry(XRF)
  • NB/SH/T 0960-2017 Sampling method of catalytic cracldng catalyst , additive and adsorbent
  • NB/SH/T 0952-2017 Standard test method for the microactivity index of catalytic cracking catalyst
  • NB/SH/T 0953-2017 Standard test method for the loss on ignition of fluid catalytic cracking catalyst
  • NB/SH/T 0958-2017 Standard test method for mechanically tapped packing density of formed catalyst and catalyst carriers
  • NB/SH/T 6075-2023 Dynamic Image Method for Determination of Catalyst Morphology in Catalytic Cracking
  • NB/SH/T 0954-2017 Standard test method for apparent bulk density of catalytic cracking catalysts
  • NB/SH/T 6068-2022 Equilibrium catalysts applied to catalytic cracking unit start-up or make-up
  • NB/SH/T 0963-2017 Determination of iron oxide content of catalytic cracking catalyst by of o-phenanthroline spectrophotometric method
  • NB/SH/T 0951-2017 Standard test method for particle size distribution of catalytic crackng catalyst by laser light scattering
  • NB/SH/T 0962-2017 Determination of sodium oxide content of catalytic cracking catalyst by flame photometry
  • NB/SH/T 0961-2017 Determination of alumina content of catalytic craclong catalyst by EDTA volumetric method
  • NB/SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalyst by static volumetric method of nitrogen adsorption
  • NB/SH/T 0863-2013 Guideline for Determination of Chemical Element in Fluid Catalytic Cracking Accelerant with X-ray Fluorescence Spectrometric Methods
  • NB/SH/T 0964-2017 Standard test method for attrition index of catalytic cracking catalysts by tube method
  • NB/SH/T 0955-2017 Standard test method for pore volume of catalytic cracking catalysts by water titration

Professional Standard - Petrochemical Industry

  • SH/T 0950-2017 Determination of lanthanum oxide and cerium oxide content in catalytic cracking catalysts by X-ray fluorescence spectrometry
  • SH/T 0960-2017 Sampling method for catalytic cracking catalysts, auxiliaries and adsorbents
  • SH/T 0953-2017 Determination of loss on ignition of catalytic cracking catalyst
  • SH/T 0954-2017 Determination of apparent bulk density of catalytic cracking catalysts
  • SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts Static nitrogen adsorption capacity method
  • SH/T 0961-2017 Determination of alumina content in catalytic cracking catalyst EDTA volumetric method
  • SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst carriers by mechanical tapping
  • SH/T 0570-1993 Determination method for platinum content in reforming catalyst
  • SH/T 0955-2017 Water droplet method for determination of pore volume of catalytic cracking catalysts
  • SH/T 0964-2017 Determination of catalytic cracking catalyst wear index straight tube method
  • SH/T 0341-1992 Determination method for aluminum oxide content in catalyst carrier
  • SH/T 0571-1993 Determination method for zeolite surface area in catalyst
  • SH/T 0963-2017 Determination of iron oxide content in catalytic cracking catalyst - phenanthroline spectrophotometry
  • SH/T 0666-1998 Petroleum Refining Catalyst Classification
  • SH/T 0342-1992 Determination method for iron content in reforming catalyst
  • SH/T 0951-2017 Determination of particle size distribution of catalytic cracking catalysts by laser scattering method
  • SH/T 0962-2017 Determination of sodium oxide content in catalytic cracking catalysts by flame photometry
  • SH/T 0952-2017 Determination method of microreactivity index of catalytic cracking catalyst

Group Standards of the People's Republic of China

Professional Standard - Chemical Industry

  • HG 2086-2004 The catalyst oxidizing sulphuric dioxide into sulphuric acid
  • HG/T 2271-2014 The platinum catalyst Oxidizing ammonia into nitric acid
  • HG/T 5035-2016 Test method of catalytic performance in the catalyst for nitrobenzene hydrogenation to aniline
  • HG/T 2511-2013 Analytical Method of Chemical Composition in Methanation Catalyst
  • HG 2271.1-1992 Platinum catalyst for S201 nitric acid production
  • HG/T 3554-2013 Analytical Method of Chemical Composition in Ammonia Synthesis Catalyst
  • HG/T 5029~5030-2016 Analytical method of chemical composition for cobalt molybdenum curing uses catalyst
  • HG/T 5314-2018 Rare earth containing catalytic cracking additive for heavy oil with high distillate yields
  • HG/T 3550-2004 Ammonia synthesis catalyst
  • HG/T 5313~5314-2018 Special Catalyst for Catalytic Cracking to Increase Production of Isoparaffins and Propylene Production and Rare Earth Containing High Liquid Yield Heavy Oil Catalytic Cracking Cocatalyst (2018)
  • HG/T 4107-2016 Methanol synthesis catalysts
  • HG/T 3546-2011 High temperature carbon monoxide shift catalysts
  • HG/T 2779-2009 Sulfur-tolerant carbon monoxide shift catalysts(low pressure part)
  • HG/T 5704-2021 Test method for nickel in waste catalysts
  • HG/T 3542-2005 Analytical method of micro - Sulphur in fertilizer catalyst
  • HG/T 3550-2013 Ammonia Synthesis Catalyst
  • HG/T 3545-2014 Test method of activity for ammonia synthesis catalyst
  • HG/T 2273.1~2273.3-2013 Natural gas conversion catalyst, thermal protection agent (2013)
  • HG/T 6227-2023 Analysis method of chemical composition of catalytic cracking catalyst X-ray fluorescence spectrometry
  • HG/T 2273.1-2013 The Natural Gas Catalyst for Primary Reforming
  • HG/T 2976-1999 Determination for attrition and abrasion of fertilizer catalyst
  • HG/T 5189~5193-2017 Analytical method of chemical composition for organic sulfur conversion absorption catalysts at room temperature
  • HG/T 5526-2019 Aluminum-nickel alloy hydrogenation catalyst activity test method
  • HG/T 6055-2022 Ruthenium-based catalyst for ammonia synthesis
  • HG/T 2510-1993 Methanation Catalyst Test Method
  • HG/T 2273.2-2013 The Natural Gas Catalyst for Secondary Reforming
  • HG/T 4349-2012 Carbonyl sulfide hydrolyzed catalysts at room temperature
  • HG/T 4348-2012 est method of naphtha steam reforming catalysts
  • HG/T 5596~5597-2019 Medium and high pressure sulfur-resistant shift catalyst for carbon monoxide and activity test method for high-precision removal of hydrogen sulfide and sulfur oxide carbon purification catalyst (2019)
  • HG/T 6367-2025 Test method of catalytic performance of silver catalyst for ethylene oxidation to ethylene oxide
  • HG/T 2782-1996 Determination of resistance to crushing of fertilizer catalyst particles
  • HG/T 4107-2009 Methanol synthesis catalysts
  • HG/T 5038~5040-2016 Analytical method of chemical compositionin pre-reduced ammonia synthesis catalysts
  • HG/T 5768-2020 Catalyst for coating production-Dibutyltin oxide
  • HG/T 4556-2013 The catalyst for cyclohexanol dehydrogenation
  • HG/T 5581-2019 Test method of activity for polyethylene oxide catalysts
  • HG/T 3556-2012 Low Temperature Carbon Monoxide Shift Catalysts
  • HG/T 5584-2019 Terephthalic acid hydrotreating catalysts
  • HG/T 5759~5762-2020 Normal temperature iron oxide desulfurizer, dimethyl ether carbonylation to methyl acetate catalyst, dimethyl ether carbonylation to methyl acetate catalyst catalytic performance test method and chromium-based ethylene polymerization catalyst chemical com
  • HG/T 5405~5407-2018 Test methods for catalytic performance of ethylene polymerization catalysts, test methods for sulfur capacity of inorganic sulfur catalysts in deliquefied gas, and test methods for activity of sweetening catalysts at room temperature (2018)
  • HG/T 3543-2014 Analytical method of chemical composition in natural gas reforming catalyst
  • HG/T 2086-2004 The catalyst oxidizing sulphuric dioxide into sulphuric acid
  • HG/T 6139-2023 Regenerated antimony pentachloride catalyst
  • HG/T 3543-2006 Analytical method of chemical composition in natural gas reforming catalyst
  • HG 3546-2002 High temperature carbon monoxide shift catalysts
  • HG/T 5195-2017 Test method for catalytic performance of octenal gas phase hydrogenation to 2-ethylhexanol catalyst
  • HG/T 5764~5767-2020 Determination of pore structure of petroleum refining catalysts, determination of metal elements in catalytic cracking catalysts, test methods for catalyst activity of supported rosin disproportionation and catalysts for cobalt and molybdenum sulfide (202
  • HG/T 5027-2016 Test method of catalytic performance for butyraldehyde vapor phase hydrogenation of butanol catalyst
  • HG/T 2086-2013 The Catalyst Oxidizing Sulphuric Dioxide Into Sulphuric Acid
  • HG/T 5204-2017 Butyraldehyde vapor phase hydrogenation system butanol catalysts
  • HG/T 6225-2023 Chromium-based ethylene polymerization catalyst
  • HG/T 4675-2014 Precipitated iron catalyst for Fischer-Tropsch synthesis
  • HG/T 3545-2006 Test method of actavity for ammonia synthesis catalyst
  • HG/T 2273.2-2004 The natural gas catalyst for secondary reforming
  • HG/T 2782-2024 Determination of crushing resistance of chemical catalyst particles
  • HG/T 5038-2016 Analytical method of chemical composition for Raney nickel catalyst
  • HG/T 3555-1984 Analytical method of chemical components in light oil reforming catalyst
  • HG/T 5757-2020 Analytical method of chemical compositionfor aluminum based hydrogenation catalyst
  • HG/T 4680-2014 Test method for single pellet crush strength of fertilizer catalysts
  • HG/T 4860-2015 Methanol to light olefins catalysts
  • HG/T 2976-1983 Fertilizer Catalyst Wear Rate Determination
  • HG/T 2779-1996 Carbon Monoxide Sulfur Tolerant Shift Catalyst
  • HG/T 2510-2014 Test method of activity for methanation catalyst
  • HG/T 2514-1993 Test method for organosulfur hydrogenation catalyst
  • HG/T 5030-2016 Analytical method of chemical composition for cobalt molybdenum curing uses catalyst
  • HG/T 5756~5758-2020 Analytical methods for chemical composition of catalysts for selective hydrogenation of benzene to cyclohexene, analytical methods for chemical composition of aluminum-based hydrogenation catalysts, and determination of reduction degree of catalysts for a
  • HG/T 4555-2013 Analytical Method of Micro-chlorine in Fertilizer Catalyst
  • HG/T 5584~5587-2019 Terephthalic acid hydrorefining catalyst, activity test method of ruthenium-based ammonia synthesis catalyst, chemical composition analysis method of supported ammonia synthesis catalyst, and chemical composition analysis method of catalyst for hydrogenat
  • HG/T 4387-2012 Butylene Hydration Resistance High-temperature Resin Catalyst
  • HG/T 2273.1-2004 The natural gas catalyst for primary reforming
  • HG 2088-1991 S107, S108 vanadium catalysts for sulfuric acid production
  • HG/T 5408~5411-2018 Analytical method for chemical composition of ruthenium carbon catalyst for hydrogenation of pyridine to piperidine, analytical method for chemical composition of inorganic sulfur catalyst in deliquefied gas, analytical method for chemical composition of
  • HG/T 5405-2018 Test method of catalytic performance for ethylene polymerization catalyst
  • HG 2506-1993 S107-1H type vanadium catalyst for sulfuric acid production
  • HG/T 2782-2011 Test method for single pellet crush strength of fertilizer catalysts
  • HG/T 5194-2017 Alkylation catalyst activity test method
  • HG/T 5767-2020 Catalysts for cobalt and molybdenum sulfide
  • HG/T 5761-2020 Catalytic performance test methods of dimethyI ether carbonylation catalyst for methyl acetate synthesis
  • HG/T 4863-2015 High palladium catalyst for ammonia oxidation in nitric acid production
  • HG/T 3542-1986 Analytical Method for Trace Sulfur in Fertilizer Catalysts
  • HG/T 2976-2011 Test method for attrition and abrasion of fertilizer catalysts
  • HG 2559-1994 Fertilizer catalyst product classification model and name
  • HG/T 5204~5205-2017 Butyraldehyde vapor phase hydrogenation system butanol catalysts
  • HG/T 3542-2013 Analytical Method of Micro - Sulphur in Fertilizer Catalyst
  • HG/T 5205-2017 Nickel series gas phase benzene hydrogenation catalysts
  • HG/T 5029-2016 Test method of activity for cobalt molybdenum curing uses catalyst
  • HG/T 5416-2018 Prereduced ammonia synthesis catalyst
  • HG/T 3545-1990 Determination of ammonia aynthesis catalyst
  • HG/T 5770-2020 Ammonia decomposition hydrogen production catalysts
  • HG 2086-1991 S101 type vanadium catalyst for sulfuric acid production
  • HG/T 2273.4-2006 Test method of natural gas reforming catalyst for primary and secondary reformer
  • HG/T 5579~5583-2019 Test methods for activity of terephthalic acid hydrotreating catalysts, chemical composition analysis methods and activity test methods for polyethylene oxide catalysts, test methods for activity test methods for n-olefin to isobutylene catalysts in lique
  • HG/T 4557-2013 The Catalyst for Nitrobenzene Hydrogenation to Aniline
  • HG/T 2271-2007 The platinum catalyst Oxidizing ammonia into nitric acid
  • HG/T 3543-1988 Analytical method of chemical composition for natural gas reforming catalysts
  • HG/T 5035~5037-2016 Catalytic Performance Test of Nitrobenzene Hydrogenation to Aniline Catalyst and Normal Temperature Organic Sulfur Conversion and Absorption Catalyst and Activity Test Method of Methanol Hydrogen Production Catalyst (2016)
  • HG 2505-2004 Organic sulphur hydrogenation catalyst
  • HG/T 6282-2024 Determination of Carbon Monoxide Index of Catalytic Cracking Catalyst
  • HG 3556-2004 Low temperature carbon monoxide shift catalyst
  • HG/T 5313-2018 Special catalysts for FCC MIP process for promoting isoparaffin and propylene
  • HG/T 5760-2020 Dimethyl ether carbonylation catalyst for methyl acetate synthesis
  • HG/T 4853-2015 Cesium catalyst of sulfuric acid production use
  • HG/T 5529-2019 Methanol hydrogen production catalysts
  • HG/T 5758-2020 Determination of ammonia synthesis catalyst reduction degree
  • HG/T 2509-2004 Methanation catalyst
  • HG 2509-1993 methanation catalyst
  • HG/T 5909~5910-2021 Analytical methods for the chemical composition of meropenem synthesis catalysts and bimetallic supported polyether polyol synthesis catalysts (2021)
  • HG/T 5955-2021 Petrochemical waste catalyst-Molybdenum determination method
  • HG/T 2559-2011 Classification type and nomenclature for fertilizer catalyst products
  • HG/T 2780-1996 Test method for carbon monoxide sulfur tolerant shift catalysts
  • HG/T 3554-2005 Analytical method of chemical composition in ammonia synthesis catalyst
  • HG 2507-1993 S109 Type Vanadium Catalyst for Sulfuric Acid Production
  • HG/T 2779-2016 Sulfur-tolerant carbon monoxide shift catalysts
  • HG/T 4617-2014 Ester resin catalyst
  • HG/T 3554-1981 Analytical Method for Chemical Components of Ammonia Synthesis Catalyst
  • HG/T 3555-2016 Analytical method of chemical components in light oil reforming catalyst
  • HG/T 5193-2017 Analytical method of chemical compositionfor methanol hydrogen production catalysts
  • HG/T 3555-2006 Analytical method of chemical components in light oil reforming catalyst
  • HG/T 5036-2016 Test method of catalytic performance for organic sulfur conversion absorption catalysts at room temperature
  • HG/T 6283-2024 Catalytic cracking of light olefins promoter
  • HG/T 2511-1993 Analytical method for chemical composition of methanation catalyst
  • HG/T 4347-2012 Naphtha steam reforming catalysts
  • HG/T 2509-2012 Methanation Catalysts
  • HG/T 2273.4-1992 Test methods for catalysts for primary and secondary reforming of natural gas
  • HG/T 4227-2011 isobutylene etherification resin catalyst
  • HG/T 3544-1989 The determinatino of high temperature carbon monoxide shift catalyst
  • HG/T 2505-2012 Organic Sulphur Hydrogenation Catalysts
  • HG/T 5525-2019 Al-Ni alloy hydrogenation catalyst
  • HG/T 5588-2019 Test method for cobalt in waste petrochemical catalysts
  • HG/T 4198-2011 Analytical method of chemical composition in methanol synthesis catalyst
  • HG/T 5765-2020 Determination method of metallic elements in catalytic cracking catalysts
  • HG/T 2511-2005 Analytical method of chemical composition in Methanation catalyst
  • HG/T 2510-2006 Test method of activity for methanation catalyst
  • HG/T 5596-2019 Sulfur-tolerant carbon monoxide shift catalysts in medium-high pressure
  • HG/T 5315-2018 Alkylation catalyst used for purification process
  • HG 2505-1993 Organic Sulfur Hydrogenation Catalyst
  • HG/T 5580-2019 Analytical method of chemical composition in polyoxyethylene catalyst
  • HG/T 2505-2004 Organic sulphur hydrogenation catalyst

Professional Standard - Machinery

  • JB/T 14798-2024 Diesel Ammonia Oxidation Catalyst
  • JB/T 14799-2024 Gasoline particulate filter catalyst
  • JB/T 15139-2025 Diesel engines—Particulate filter catalyst
  • JB/T 11880.10-2024 Diesel engine selective catalytic reduction (SCR) systems Part 10: Extruded SCR catalysts
  • JB/T 11880.9-2016 Diesel engines.Selective catalytic reduction (SCR) systems.Part 9: Catalysts
  • JB/T 11880.13-2024 Diesel engine selective catalytic reduction (SCR) systems Part 13: Molecular sieves for catalysts
  • JB/T 15140-2025 Diesel engines―Coated zeolite catalyst for selective catalytic reduction (SCR) system

Jilin Provincial Standard of the People's Republic of China

Hebei Provincial Standard of the People's Republic of China

  • DB13/T 5511-2022 Coal Catalytic Gasification Catalyst Recovery Process Technical Regulations
  • DB13/T 5528-2022 Technical specification for catalytic coal gasification without recovery catalyst

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

Professional Standard - Electron

  • SJ/T 10379-1993 Method for the determination of thorium dioxide in thorium tungsten alloys

Professional Standard - Rare Earth

  • XB/T 505-2003 Substrate of catalyst for petrol vehicle emission purification
  • XB/T 506-2007 Oxidation catalyst for diesel vehicle exhaust purification
  • XB/T 505-2011 Substrate of catalyst for gasoline vehicle emission purification
  • XB/T 503-1993 Gasoline vehicle exhaust purification spherical rare earth catalyst

Taiwan Provincial Standard of the People's Republic of China

Anhui Provincial Standard of the People's Republic of China

Professional Standard - Non-ferrous Metal

  • YS/T 210-1994 Pelleted catalyst of platinum for diesel engine exhaust gases purification
  • YS/T 1662-2023 Specification for packaging of precious metals waste catalyst
  • YS/T 501-2013 Determination of Thorium Dioxide Content in Thorium - Tungsten Alloys Gravimetric Method
  • YS/T 501-2006 Determination of thorium dioxide in thorium-tungsten alloys -- weight method
  • YS/T 210-2009 Pelleted catalyst of platinum for diesel engine exhaust gases purification

Shandong Provincial Standard of the People's Republic of China

  • DB37/T 2603-2014 Technical Requirements for Selective Catalytic Reduction (SCR) Denitrification Catalysts in Shandong Province

未注明发布机构

Professional Standard - Agriculture

  • ZB G 75003-1986 Analytical method for loss on ignition of fertilizer catalyst

Professional Standard - Coal

  • MT 869-2000 Carbon monoxide oxidative for filter self-rescuers

Professional Standard - Energy and Power Planning

Polski Komitet Normalizacyjny (PKN)

Magyar Szabványügyi Testület

GM North America

General Motors Corporation (GM)

American Society for Testing and Materials (ASTM)

  • ASTM D3766-86(2007) Standard Terminology Relating to Catalysts and Catalysis
  • ASTM D3766-86(2002) Standard Terminology Relating to Catalysts and Catalysis
  • ASTM D3663-03 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
  • ASTM D3663-20 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
  • ASTM RR-D32-1003 1982 D4058-Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
  • ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
  • ASTM D3663-03(2015) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
  • ASTM UOP333-07 Fines in Catalysts and Catalyst Supports by Sieve Analysis
  • ASTM D3766-08 Standard Terminology Relating to Catalysts and Catalysis
  • ASTM D3766-24a Standard Terminology Relating to Catalysts and Catalysis
  • ASTM D3766-86(1997) Standard Terminology Relating to Catalysts and Catalysis
  • ASTM D3766-08(2013) Standard Terminology Relating to Catalysts and Catalysis
  • ASTM UOP333-10 Fines in Catalysts and Catalyst Supports by Sieve Analysis
  • ASTM D6761-22a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
  • ASTM D4058-96(2015) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
  • ASTM D6761-02 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
  • ASTM D6761-22 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
  • ASTM UOP896-93 Platinum in Spent Catalyst
  • ASTM D6761-07(2012) Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
  • ASTM D6761-17 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
  • ASTM RR-D32-1039 2002 D6761-Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
  • ASTM D3766-08(2018) Standard Terminology Relating to Catalysts and Catalysis
  • ASTM D4058-25 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
  • ASTM D6761-07 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
  • ASTM UOP954-03 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
  • ASTM D4058-96(2020) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
  • ASTM D5153-91(1997) Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
  • ASTM D7084-23 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
  • ASTM RR-D32-1040 2004 D7084-Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
  • ASTM D7206/D7206M-19 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
  • ASTM D4179-11 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
  • ASTM UOP954-11 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
  • ASTM D7206/D7206M-06(2012)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
  • ASTM D7206/D7206M-06(2013)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
  • ASTM UOP602-12 Soxhlet Extraction of Catalyst
  • ASTM D6761-04 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
  • ASTM D4179-22 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
  • ASTM D7084-18 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
  • ASTM D7084-04(2009) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
  • ASTM D7084-04 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
  • ASTM D6175-03(2008) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
  • ASTM D4164-03 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM D6175-03(2013) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
  • ASTM RR-D32-1024 1988 D4179-Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
  • ASTM UOP602-89 Soxhlet Extraction of Catalyst
  • ASTM UOP410-14 Sodium in Catalysts by AAS
  • ASTM D4180-03 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
  • ASTM D4180-13 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
  • ASTM D4164-24 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM D7964/D7964M-25 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
  • ASTM UOP254-14 Apparent Bulk Density of Fluid Cracking Catalyst
  • ASTM D4180-03(2008) Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
  • ASTM D7084-04(2017) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
  • ASTM D4164-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM D6175-24 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
  • ASTM D6175-03 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
  • ASTM RR-D32-1017 1986 D4164-Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM D7964/D7964M-14 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
  • ASTM D6761-04a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
  • ASTM RR-D32-1018 1986 D4180-Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
  • ASTM D4179-11(2017) Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
  • ASTM UOP815-87 Acid Insolubles in Catalysts
  • ASTM D8393-21 Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water Adsorption
  • ASTM D6175-03(2019) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
  • ASTM D4699-03(2018)e1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
  • ASTM D4699-03(2018) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
  • ASTM D4164-13(2018) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM UOP629-90 Analysis of Hydrogen Fluoride Alkylation Catalysts and Regenerator Bottoms
  • ASTM D3907/D3907M-19 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
  • ASTM D4164-13 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM RR-D32-1042 2014 D7964-Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
  • ASTM UOP878-87 Potassium in Catalysts by Atomic Absorption
  • ASTM RR-D32-1022 1987 D4699-Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
  • ASTM UOP254-87 Apparent Bulk Density of Fluid Cracking Catalyst
  • ASTM D4781-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM D4781-03(2013) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM D4438-13(2018)e1 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
  • ASTM D4699-23 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
  • ASTM D4438-24 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
  • ASTM D7964/D7964M-19 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
  • ASTM UOP894-91 Mercury in Catalysts by GF-AAS
  • ASTM D3907-03(2008) Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
  • ASTM D4284-12 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
  • ASTM D4699-03(2013) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
  • ASTM D4699-03 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
  • ASTM D7206/D7206M-25 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
  • ASTM UOP715-85 Rhenium Catalysts by Spectrophotometry
  • ASTM UOP879-87 Aluminum in Catalysts by Atomic Absorption
  • ASTM UOP294-93 Apparent Bulk Density of Catalyst Particles
  • ASTM RR-D32-1011 1984 D4438-Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
  • ASTM D4180-23 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
  • ASTM UOP303-07 Impurities in Catalysts by ICP-OES
  • ASTM D4781-24 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM D3907-03 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
  • ASTM D4641-17 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
  • ASTM UOP778-07 Packed Apparent Bulk Density (ABD) of Extruded Catalyst
  • ASTM UOP602-15 Soxhlet Extraction of Catalyst
  • ASTM D4164-99 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM D4780-12(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
  • ASTM RR-D32-1005 1985 D4512-Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM D4438-13 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
  • ASTM D4780-23 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
  • ASTM UOP909-98 Loss on Ignition of Catalyst at 700°C
  • ASTM UOP294-14 Apparent Bulk Density of Catalyst Particles
  • ASTM UOP412-87 Loss on Ignition of Catalysts at 500°C
  • ASTM UOP973-01 Automated Crush Strength of Extruded Catalysts
  • ASTM UOP967-00 Automated Crush Strength of Spherical Catalysts
  • ASTM UOP944-96 Surface Area of Fresh and Regenerated Catalyst
  • ASTM RR-D32-1016 1985 D3907-Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
  • ASTM D7085-10 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
  • ASTM D4512-03 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM D4512-03(2008) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM RR-D32-1026 1988 D4781-Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM D3907/D3907M-13 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
  • ASTM UOP275-98 Loss on Ignition of Catalyst at 900°C
  • ASTM D4180-13(2018) Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
  • ASTM D4284-12(2017)e1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
  • ASTM D3908-03 Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method
  • ASTM D3907-92 Standard Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test (Withdrawn 2001)
  • ASTM D4641-12 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
  • ASTM D4781-03 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM D7085-04e1 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
  • ASTM UOP629-08 Analysis of Hydrogen Fluoride Alkylation Catalysts and Regenerator Bottoms
  • ASTM UOP778-81 Apparent Bulk Density of Extruded Catalyst
  • ASTM D7085-04(2010)e1 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
  • ASTM D7085-25 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)

Universal Oil Products Company (UOP)

  • UOP 333-2010 Fines in Catalysts and Catalyst Supports by Sieve Analysis
  • UOP 602-2015 Soxhlet Extraction of Catalyst
  • UOP 954-2011 Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
  • UOP 410-2014 Sodium in Catalysts by AAS
  • UOP 254-2014 Apparent Bulk Density of Fluid Cracking Catalyst
  • UOP 878-1987 Potassium in Catalysts by Atomic Absorption
  • UOP 879-1987 Determination of Aluminum in Catalysts by Atomic Absorption
  • UOP 303-2007 IMPURITIES IN CATALYSTS BY ICP-AES
  • UOP 896-1993 Determination of Platinum in Spent Catalyst
  • UOP 436-1987 Silica in Catalysts by Gravimetric Procedure
  • UOP 294-2014 Apparent Bulk Density of Catalyst Particles
  • UOP 973-2001 AUTOMATED CRUSH STRENGTH OF EXTRUDED CATALYSTS

Korean Agency for Technology and Standards (KATS)

Bureau of Indian Standards

  • IS 17539-2021 SILVER CATALYST - SPECIFICATION
  • IS 6018-1993 Platinum, platinum rhodium catalyst gauges
  • IS 8325-1983 Specification for nickel formate for nickel catalysts
  • IS 6018-1971 Specification for platinum and platinum-rhodium catalyst wire mesh

Japanese Industrial Standards Committee (JISC)

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

GM Europe

  • GME4667-2004 Test of Coating Adherence in Catalytic Converters English/German; Includes Appendix A
  • GME L 000 0953-2003 Ordinary topcoat catalyst (Germany)
  • GME8282-2002 Absolutbeurteilung der Haftfestigkeit von Katalysatorbeschichtungen Catalytic Converter - Washcoat Loss Evaluation English/German; Includes Appendix A-C

Institute of Electrical and Electronics Engineers (IEEE)

GM Holden Ltd

United States Navy

Gosstandart of Russia

German Institute for Standardization

  • DIN 16945:1989 Testing of resins, hardeners and accelerators, and catalyzed resins
  • DIN 43532:1986 Lead-acid storage batteries; vent plug with catalyst
  • DIN 16945 Testing of resins, hardeners and accelerators, and catalyzed resins
  • DIN 16945:1976 Testing of resins, hardeners and accelerators, and catalyzed resins
  • DIN 16945:1989-03 Testing of resins, hardeners and accelerators, and catalyzed resins

Military Standards (MIL-STD)

British Standards Institution (BSI)

  • ASTM D3907/D3907M-25 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

Indonesia Standards

  • SNI 06-4170-1996 Specification of calcium chloride for speeding up concrete hardening

Ente Nazionale Italiano di Unificazione

  • UNI 11259:2016 Photocatalysis - Determination of the photocatalytic activity of hidraulic binders - Rodammina test method

American Petroleum Institute (API)

International Organization for Standardization (ISO)

American National Standards Institute (ANSI)

  • Q/CHD 28-2019 Technical specification for detection of flue gas denitrification catalyst by selective catalytic reduction method for thermal power units