Core hardness

Core hardness, Total:443 items.

The international standard classification for "Core hardness" includes: Thermal and sound insulating materials , Plastics , Bolts, screws, studs , Mechanical testing of metals , Cereals, pulses and derived products , Mechanical testing , Internal combustion engines , Other rubber and plastics products , Miscellaneous domestic and commercial equipment , Rings, bushes, sleeves, collars , Rubber , Fasteners in general , Aluminium products , Equipment for the chemical industry , Rubber and plastics products .

The Chinese standard classification for "Core hardness" includes: Cement and cement product equipment , Heat insulation, sound absorption, light fireproof material , Basic standards and general methods for synthetic resin and plastic , Fastener , Metal mechanical property test method , Cereal crop and forage crop in general , Rubber products in general , Metal material testing machine , Engine body and moving parts , Other rubber products , Pipeline fittings , Technical management , Light metals and their alloys , Special chemical instrument and meter .

Hebei Provincial Standard of the People's Republic of China

DB13/T 5591-2022 Rockwell hardness test method for forged (rolled) steel ball hardness

Professional Standard - Building Materials

JC/T 1061-2007 Aluminum-foil faced rigid polyurethane foam sandwich panels
JC/T 878.5-2010 Case-hardend Reducer Used In Cement Industry Part 5:Reducer For Rolling Press
JC/T 1051-2007 Aluminum foil faced phenolic foam sandwich panels
JC/T 878.2-2010 Case - hardend Reducer Used In Cement Industry Part 2 : Reducer For Side Drive Tube Mill
JC/T 868-2000 Metal skinned rigid polyurethane foam sandwich panels

Military Standard of the People's Republic of China-General Armament Department

GJB 9585-2018 Specification for carbide cores
GJB 5076-2001 Specification for carbide cores

未注明发布机构

DIN 61200 Felts; hardness
ASTM RR-E28-1005 1985 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
DIN EN ISO 6507-4 E:2016-08 Vickers hardness test of metallic materials Part 4: Hardness value table (draft)
ASTM RR-E28-1003 1984 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
DIN ISO 48-3 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
DIN EN ISO 6507-3 Bei 1:1998 Metallic materials – Hardness test according to Vickers – Part 3: Calibration of hardness reference plates
ASTM RR-E28-1044 2012 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
DIN ISO 48-4 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
AS 1816.4:2007(R2017) Metallic materials - Brinell hardness test - Table of hardness values
DIN EN ISO 6506-4 E:2013-03 Fabric hardness test of metallic materials Part 4: Hardness value table (draft)
DIN EN ISO 4545-4 E:2015-05 Hardness Testing of Metallic Materials Part 4: Hardness Value Table (Draft)
DIN EN 12390-7 Berichtigung 1:2006 Testing of hardened concrete – Part 7: Density of hardened concrete
ASTM RR-E28-1001 1982 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3098.5-2000 Mechanical properties of fasteners - Tapping screws
GB/T 231.2-2022 Metallic materials—Brinell hardness test—Part 2: Verification and calibration of testing machines
GB/T 3098.21-2008 Mechanical properties of fasteners - Part 21:Tapping screws of stainless-steel
GB/T 4340.3-2012 Metallic Vickers hardness test - Part 3 : Calibration of hardness
GB/T 18449.4-2009 GB/T 18449.4-2009
GB/Z 41117-2021 Fasteners—Fundamentals of hydrogen embrittlement in steel fasteners
GB/T 3098.3-2016 Mechanical properties of fasteners-Set screws
GB/T 230.3-2022 Metallic materials—Rockwell hardness test—Part 3:Calibration of reference blocks
GB/T 17394.2-2022 Metallic materials—Leeb hardness test—Part 2: Verification and calibration of hardness testers
GB/T 39011.3-2020 Mechanical pencils for technical drawings—Part 3:Black leads—Bending strengths of HB leads
GB/T 21304-2007 Determination of wheat hardness—Hardness index method
GB/T 39693.7-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 7:Apparent hardness of rubber-covered rollers by Shore-type durometer method
GB/T 2411-2008 Plastics and ebonite - Determination of indentation hardness by means of a duronmeter(shore hardness)
GB/T 3098.7-2000 Mechanical properties of fasteners-Thread rolling screws
GB/T 231.3-2012 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks
GB/T 32660.3-2016 Metallic materials—Webster hardness test—Part 3: Calibration of reference blocks
GB/T 18449.3-2001 Metallic knoop hardness test - Part 3: Calibration of hardness reference blocks
GB/T 531-1999 Rubber-Determination of indentation hardness by means of pocket hardness meters
GB/T 39693.8-2022 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 8:Apparent hardness of rubber-covered rollers by Pusey and Jones method
GB/T 3098.11-2002 Mechanical properties of fasteners - Drilling screws with taping screw thread
GB/T 17394.3-2022 Metallic materials—Leeb hardness test—Part 3: Calibration of reference test blocks
GB/T 531.1-2008 Rubber vulcanized or thermoplastic - Determination of indentation hardness - Part 1：Duromerer method （Shore hardness）
GB/T 16939-1997 High strength bolts for joints of space grid structures
GB/T 17394.2-2012 Metallic materials—Leeb hardness test—Part 2:Verification and calibration of hardness testers
GB/T 231.3-2022 Metallic materials—Brinell hardness test—Part 3:Calibration of reference blocks
GB/T 4340.2-1999 Metallic Vickers hardness test - Part 2 : Verification of hardness testers
GB/T 16939-2016 High strength bolts for joints of space grid structures
GB/T 231.2-2002 Metallic Brinell hardness test - Part 2: Verification and calibration of hardness testers
GB/T 3398.2-2008 Plastics - Determination of hardness - Part 2: Rockwell hardness
GB/T 4340.4-2009 Metallic materials—Vickers hardness test—Part 4:Tables of hardness values
GB/T 17394.4-2014 Metallic materials―Leeb hardness test―Part 4:Tables of hardness values conversation
GB/T 43432.3-2023 Metallic materials—Barcol hardness test—Part 3: Calibration of reference blocks
GB/T 32660.2-2016 Metallic materials—Webster hardness test—Part 2: Verification and calibration of hardness testers
GB/T 18449.2-2012 Metallic materials—Knoop hardness test—Part 2:Verification and calibration of testing machines
GB/T 3765-1983 Specification for bite type tube fittings
GB/T 18449.3-2012 Metallic materials - Knoop hardness test - Part 3：Calibration of reference blocks
GB/T 39542.3-2020 Mechanical pencils for technical drawings—Part 3:Black leads—Bending strengths of HB leads
GB/T 231.4-2009 Metallic materials—Brinell hardness test—Part 4:Tables of hardness values
GB/T 231.3-2002 Metalic Brinell hardness test - Part 3: Calibration of hardness reference blocks
GB/T 18449.2-2001 Metallic knoop hardness test - Part 2 : Verification of hardness testers
GB/T 4340.3-1999 Metallic Vickers hardness test - Part 3 : Calibration of hardness reference blocks
GB/T 4340.2-2012 Metallic materials - Vickers hardness test - Part 2：Verification and calibration of testing machines
GB/T 1698-2003 Ebonite--Determination of hardness by means of a durometer
GB/T 43432.2-2023 Metallic materials—Barcol hardness test—Part 2:Verification and calibration of hardness testers
GB/T 17394.3-2012 Metallic materials - Leeb hardness test - Part 3: Calibration of reference blocks
GB/T 231.2-2012 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
GB/T 25361.1-2022 Internal combustion engines—Piston pins—Part 1: General specifications

Group Standards of the People's Republic of China

T/ZZB 0873-2018 Screw of full hard for plastics machinery
T/ZZB 1669-2020 High-strength fillister head hub bolts for automotive wheels
T/ZZB 1299-2019 Blade with beard lifting and cutting function for electric shaver
T/ZZB 1558-2020 General utility small gasoline engine—Split type crankshaft connecting rod assembly
T/ZZB 2603-2021 Cross-recessed countersunk（flat） head tapping screws
T/CSCS -TC01-01-2018 Technical specifications for self-locking one-way high-strength bolt connections for steel structures
T/ZZB 2635-2022 Dry wall screws
T/CEEIA 432-2020 High-elongation hard-drawn aluminium stranded conductors composite core supported/reinforced
T/ZZB 2089-2021 Thread rolling screws for house electrical appliances
T/ZZB 2664-2022 Snow chains for commercial vehicles

Professional Standard - Electron

SJ 2819-1987 Tapping screws of heat treated steel - Mechanical properties
SJ 2833-1987 Specification for cross rcessed thread forming screws

Taiwan Provincial Standard of the People's Republic of China

CNS 14589-2001 Coextruded polyvinyl chloride （ＰＶＣ）plastic pipe with a cellular core
CNS 8763-1983 Method of Test for Micro Hardness Testing Machines for Vickers and Knoop Hardness
CNS 8762-1982 Micro Hardness Testing Machines for Vickers and Knoop Hardness
CNS 10047-1983 Standard Hardness Blocks of Rockwell Tester and Rockwell Superficial Hardness Tester

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 4340.4-2022 Metallic materials—Vickers hardness test—Part 4：Tables of hardness values
GB/T 18449.4-2022 Metallic materials—Knoop hardness test—Part 4: Tables of hardness values
GB/T 39693.3-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 4341.2-2016 Metallic materials―Shore hardness test―Part 2:Verification of hardness testers
GB/T 4341.3-2016 Metallic materials—Shore hardness test—Part 3: Calibration of reference blocks

Professional Standard - Non-ferrous Metal

YS/T 849-2012 Coated Aluminium Foils for Rigid Phenolic Foam Sandwich Panel

Professional Standard - Chemical Industry

HG/T 2116-1991 Conventional international rubber hardness machine with high hardness
HG 2117-1991 Conventional International Rubber Hardometer - Medium Hardness
HG/T 2117-1991 Medium hardness of conventional international rubber hardness machine
HG/T 2118-1991 Conventional international rubber hardness machine with low hardness
HG 2116-1991 Conventional International Rubber Hardometer - High Hardness
HG/T 2413.2-1992 Rubber-covered Rollers - Determination of Apparent Hardness: Shore Hardness Tester Method
HG/T 3846-2008 Ebonite-Determination of hardness by means of a durometer
HG 2118-1991 Conventional International Rubber Hardometer - Low Hardness

Professional Standard - Geology

DZ 1.3-1984 Tungsten carbide, steel grain core drilling pipe thread

Professional Standard - Aviation

HB 7389-1996 Rockwell hardness HRG and Brinell hardness HBS conversion value

United States Navy

NAVY MIL-P-24705 A-1992 PENETRATORS, MULTIPLE CABLE, FOR ELECTRIC CABLES, GENERAL SPECIFICATION FOR
NAVY MIL-DTL-24231/2 E-2013 CONNECTOR, PLUG, TYPE I, 90-DEGREE, MOLDED, THREE-, FOUR-, AND FIVE-CONDUCTOR
NAVY ZZ-R-710 A-1967 RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS

British Standards Institution (BSI)

BS EN 14951:2006 Solid hardwood paneling and cladding - Machined profiles elements
17/30335305 DC BS ISO 7619-1. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method (Shore hardness). Part 1: Durometer method (Shore hardness)
BS EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS EN ISO 2039-2:1992 Determination of Rockwell hardness. Rockwell hardness. Rockwell hardness
BS ISO 19979:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS EN ISO 2039-2:2000 Determination of Rockwell hardness - Rockwell hardness - Rockwell hardness
BS ISO 48-4:2018 Rubber, vulcanized or thermoplastic. Determination of hardness. Indentation hardness by durometer method (Shore hardness)
BS EN 1303:2015 Building hardware. Cylinders for locks. Requirements and test methods
BS 903-A57:1997 Physical testing of rubber - Determination of indentation hardness by means of pocket hardness meters
BS EN ISO 6506-4:2014 Metallic materials. Brinell hardness test. Table of hardness values
BS EN ISO 6507-4:2018 Metallic materials. Vickers hardness test. Tables of hardness values
BS EN 23878:1993 Hardmetals. Vickers hardness test
BS EN ISO 4545-4:2018 Metallic materials. Knoop hardness test. Table of hardness values
BS EN ISO 4545-4:2006 Metallic materials - Knoop hardness test - Tables of hardness values
BS EN 2428:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS EN 2430:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD
BS EN ISO 6506-4:2005 Metallic materials - Brinell hardness test - Table of hardness values
BS EN 2431:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD
BS EN 2261:1995 Silicone rubber (VMQ) - Hardness 70 IRHD
BS EN 2432:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD
BS EN 2429:1995 Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD
BS EN 2260:1995 Silicone rubber (VMQ) - Hardness 60 IRHD

European Committee for Standardization (CEN)

EN 14951:2006 Solid hardwood panelling and cladding - Machined profiles elements
EN ISO 2039-2:1999 Plastics - Determination of Hardness - Part 2: Rockwell Hardness
EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
EN ISO 4545-4:2018 Metallic materials - Knoop hardness test - Part 4: Table of hardness values
EN ISO 868:1997 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) ISO 868: 1985
prEN 667-1992 Rubber floor coverings; determination of indentation hardness by means of a durometer (Shore A hardness)
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN ISO 6507-4:2005 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO 6507-4:2005)
EN ISO 6507-2:2005 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005)
EN ISO 4545-4:2005 Metallic materials - Knoop hardness test - Part 4: Table of hardness values
EN ISO 6506-4:2014 Metallic materials - Brinell hardness test - Part 4: Table of hardness values
EN ISO 15236-4:2004 Steel cord conveyor belts - Part 4: Vulcanized belt joints
EN ISO 6506-4:2005 Metallic materials - Brinell hardness test - Part 4: Table of hardness values ISO 6506-4:2005
EN 10003-2:1994 Metallic Materials - Brinell Hardness Test - Part 2: Verification of Brinell Hardness Testing Machines
EN 12390-7:2009 Testing hardened concrete - Part 7: Density of hardened concrete

Japanese Industrial Standards Committee (JISC)

JIS Z 3326:1991 Arc welding flux cored wires for hardfacing
JIS K 7202-2:2001 Plastics -- Determination of hardness -- Part 2: Rockwell hardness
JIS Z 2251-2:2020 Knoop hardness test-- Part 2: Table of hardness values
JIS Z 2243-2:2018 Brinell hardness test -- Part 2: Table of hardness values
JIS Z 2244-2:2020 Vickers hardness test -- Part 2: Tables of hardness values
JIS K 7215:1986 Testing methods for durometer hardness of plastics
JIS K 6253-3:2012 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method
JIS K 6253-3:2023 Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method

German Institute for Standardization

DIN ISO 48-4:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN EN ISO 2039-2:2000 Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987); German version EN ISO 2039-2:1999
DIN EN ISO 15236-4:2004 Steel cord conveyor belts - Part 4: Vulcanized belt joints (ISO 15236-4:2004); German Version EN ISO 15236-4:2004
DIN EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN ISO 48-4:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018)
DIN EN ISO 868:2003-10 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN EN ISO 4545-4:2018-05 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017); German version EN ISO 4545-4:2018
DIN EN ISO 6506-4:2015-02 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014); German version EN ISO 6506-4:2014
DIN EN 2429:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD; German version EN 2429:1995
DIN ISO 48-3:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN EN ISO 6507-4:2018-07 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018); German version EN ISO 6507-4:2018
DIN EN ISO 2039-2:2000-01 Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987); German version EN ISO 2039-2:1999
DIN EN 2430:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD; German version EN 2430:1995
DIN EN 14951:2006 Solid hardwood panelling and cladding - Machined profiles elements English version of DIN EN 14951:2006-06
DIN EN 2431:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD; German version EN 2431:1995
DIN ISO 7619-1:2012 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)
DIN ISO 48-3:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 48-3:2018)
DIN 61200:1985 Felts; hardness
DIN EN 60424-2:1998 Guidance on the limits of surface irregularities of ferrite cores - Part 2: RM-cores (IEC 60424-2:1997); German version EN 60424-2:1997
DIN 50190-4:1999 Hardness depth of heat-treated parts - Part 4: Determination of the fusion hardening depth and the fusion depth

American Society for Testing and Materials (ASTM)

ASTM E140-97e2 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-12b Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-97e3 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-12be1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-02e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-05e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-05 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-02 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-07 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM F1957-99(2017) Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM F1957-99 Standard Test Method for Composite Foam Hardness-Durometer Hardness

SCC

DANSK DS/EN ISO 2039-2:1999 Plastics - Determination of hardness - Part 2: Rockwell hardness
DANSK DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
HOLDEN HN 0163-1978 Determination of Indentation Hardness Durometer
NS 9507:1985 Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
CEI EN 60424-3:2016 Ferrite cores - Guidelines on the limits of surface irregularities Part 3: ETD-cores, EER-cores, EC-cores and E-cores
HOLDEN HN 0163-2013 Determination of Indentation Hardness Durometer
DANSK DS/EN 60424-3:2016 Ferrite cores – Guidelines on the limits of surface irregularities – Part 3: ETD-cores, EER-cores, EC-cores and E-cores
AENOR UNE-EN ISO 2039-2:2000 PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS (ISO 2039-2:1987)
BS EN ISO 868:1998 Plastics and ebonite. Determination of indentation hardness by means of a a durometer (Shore hardness)
DANSK DS/EN ISO 6506-4:2014 Metallic materials – Brinell hardness test – Part 4: Table of hardness values
NS-EN ISO 2039-2:1999 Plastics — Determination of hardness — Part 2: Rockwell hardness (ISO 2039-2:1987)
NS-EN ISO 868:1997 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985)
NS-EN ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
AENOR UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
UNE 57163-5:1992 PAPER AND BOARD CORES. PART 5: DETERMINATION OF THE FLAT CRUSH RESISTANCE.
NS 9511:1985 Plastics — Determination of hardness by the ball indentation method - Part 2: Rockwell hardness
BS 240-2:1929 The hardness of steel balls for brinell hardness testing
09/30193391 DC BS ISO 7619-1. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method (Shore hardness)
12/30273364 DC BS EN 2713-012. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between — 55 degreesC and 200 degreesC Part 012. MNA (1 core) MNB (pair), MNC(3 cores), MND (4 cores), cables family. Silver plated...
AS 1012.14:1973 Methods of testing concrete, Part 14: Method for securing and testing cores from hardened concrete for compressive strength or indirect tensile strength
MIL MIL-DTL-24231/2E-2013 Connector, Plug, Type 1, 90-Degree, Molded, Three-,Four-, and Five-Conductor
DANSK DS/EN ISO 6507-4:2018 Metallic materials – Vickers hardness test – Part 4: Tables of hardness values (ISO 6507-4:2018)
AENOR UNE-EN ISO 4545-4:2018 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017)
NS-EN ISO 4545-4:2018 Metallic materials — Knoop hardness test — Part 4: Table of hardness values (ISO 4545-4:2017)
NS-EN ISO 4545-4:2005 Metallic materials — Knoop hardness test — Part 4: Table of hardness values (ISO 4545-4:2005)
DIN ISO 7619-1 E:2011 Draft Document - Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)
BS 215:1930 Hard drawn aluminium and steel cored aluminium conductors for overhead power transmission purposes
DANSK DS/EN ISO 4545-4:2018 Metallic materials – Knoop hardness test – Part 4: Table of hardness values (ISO 4545-4:2017)
NS-EN ISO 6506-4:2014 Metallic materials — Brinell hardness test — Part 4: Table of hardness values (ISO 6506-4:2014)
AS A105:1968 Method for securing and testing cores from hardened Portland cement concrete for compressive strength or indirect tensile strength
AENOR UNE 57163-7:2004 Paper and cardboard cores. Part 7: Determination of flexural strength using the three-point method.
NS-EN ISO 6507-4:2018 Metallic materials — Vickers hardness test — Part 4: Tables of hardness values (ISO 6507-4:2018)
UNE-EN ISO 6506-4:2007 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2005)
AENOR UNE-EN ISO 6506-4:2015 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014)
BS 2782-3 METHOD 365B:1981 Methods of testing plastics. Mechanical properties-Determination of indentation hardness by means of a durometer (Shore hardness)
AENOR UNE-EN ISO 6507-4:2018 Metal materials. Vickers hardness test. Part 4: Table of hardness values. (ISO 6507-4:2018).
13/30263779 DC BS ISO 6506-4. Metallic materials. Brinell hardness test. Part 4. Table of hardness values
NS-EN ISO 6506-4:2005 Metallic materials — Brinell hardness test — Part 4: Table of hardness values (ISO 6506-4:2005)
DIN ISO 48-4 E:2020 Draft Document - Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness) (ISO 48-4:2018); Text in German and English
DANSK DS/EN 60424-8:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8: PQ-cores
BS EN ISO 4545-4:2005 Metallic materials. Knoop hardness test-Tables of hardness values
UNE 53549:1991 RUBBER. DETERMINATION OF HARDNESS IN (IRHD) INTERNATIONAL RUBBER HARDNESS DEGREES
DIN EN 1303 E:2013 Draft Document - Building hardware - Cylinders for locks - Requirements and test methods; German version prEN 1303:2013
BS ISO 7619-1:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS EN ISO 6507-4:2005 Metallic materials. Vickers hardness test-Tables of hardness values
BS ISO 7619-1:2004+A1:2008 Rubber, vulcanized or thermoplastic. Determination of indentation hardness-Durometer method (Shore hardness)
NS-EN ISO 6507-4:2005 Metallic materials — Vickers hardness test — Part 4: Tables and hardness values (ISO 6507-4:2005)
NS-EN 101:1991 Ceramic tiles — Determination of scratch hardness of surface according to Mohs

International Organization for Standardization (ISO)

ISO 6507-1:1982 Metallic materials; Hardness test; Vickers test; Part 1 : HV 5 to HV 100
ISO 2039-2:1987 Plastics; Determination of hardness; Part 2 : Rockwell hardness
ISO 6507-2:1983 Metallic materials; Hardness test; Vickers test; Part 2 : HV 0,2 to less than HV 5
ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 2783:1975 Ebonite — Determination of hardness by means of a durometer
ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 868:1978 Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 4545-4:2017 Metallic materials - Knoop hardness test - Part 4: Table of hardness values
ISO 868:1985 Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 6506-4:2005 Metallic materials — Brinell hardness testPart 4:Table of hardness values
ISO 4545-4:2005 Metallic materials — Knoop hardness test — Part 4: Table of hardness values
ISO 6507-4:2005 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
ISO 6506-4:2014 Metallic materials - Brinell hardness test - Part 4: Table of hardness values
ISO 2039-2:1981 Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
ISO 7619-1:2004 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 9177-3:1994 Mechanical pencils - Part 3: Black leads - Bending strengths of HB leads
ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD); Determination of hardness
ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD); Determination of hardness
ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
ISO 48:1979 Vulcanized rubbers; Determination of hardness (Hardness between 30 and 85 IRHD)
ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Indentation hardness by IRHD pocket meter method
ISO 3738:1976 Hardmetals — Rockwell hardness test (Scale A)
ISO 7267-1:1997 Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method
ISO 146:1984 Metallic materials; Hardness test; Verification of Vickers hardness testing machines HV 0,2 to HV 100
ISO 22394:2010 Hardmetals - Knoop hardness test
ISO 7619:1986 Rubber; Determination of indentation hardness by means of pocket hardness meters
ISO 7267-2:1986 Rubber-covered rollers; Determination of apparent hardness; Part 2 : Shore-type durometer method
ISO 7619:1997 Rubber - Determination of indentation hardness by means of pocket hardness meters
ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2: Shore-type durometer method
ISO 6506:1981 Metallic materials; Hardness test; Brinell test
ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method

KR-KS

KS M ISO 2039-2-2008(2023) Plastics－Determination of hardness－Part 2：Rockwell hardness
KS B ISO 1651-2012 Hardmetal(carbide) core tube drawing plugs－Dimension
KS M ISO 868-2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 7619-1-2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)

Association Francaise de Normalisation

NF T51-024-2:1994 PLASTICS. DETERMINATION OF HARDNESS. PART 2 : ROCKWELL HARDNESS.
NF ISO 48-4:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 4: penetration hardness by the durometer method (Shore hardness)
NF T46-003-4*NF ISO 48-4:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4 : indentation hardness by durometer method (Shore hardness)
NF EN ISO 2039-2:1999 Plastics - Determination of hardness - Part 2: Rockwell hardness
NF T51-024-2*NF EN ISO 2039-2:1999 Plastics. Determination of hardness. Part 2 : Rockwell hardness.
NF EN ISO 868:2003 Plastics and ebonite - Determination of penetration hardness using a durometer (Shore hardness)
NF A03-152-4:2006 Metallic materials - Brinell hardness test - Part 4 : table of hardness values.
NF A03-154-4*NF EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4 : tables of hardness values
NF A03-154-4:2006 Metallic materials - Vickers hardness test - Part 4 : tables of hardness values.
NF A03-150-4:2006 Metallic materials - Knoop hardness test - Part 4 : tables of hardness values.
NF A03-150-4*NF EN ISO 4545-4:2018 Metallic materials - Knoop hardness test - Part 4 : table of hardness values
NF A03-152-4*NF EN ISO 6506-4:2014 Metallic materials - Brinell hardness test - Part 4 : table of hardness values
NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
NF T51-174:1998 Plastics and ebonite. Determination of identation hardness by means of a durometer (Shore hardness).
NF T46-003-5*NF ISO 48-5:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5 : indentation hardness by IRHD pocket meter method
NF T46-052-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1 : durometer method (Shore hardness).
NF T46-029:1976 Vulcanized rubbers of high hardness (85 to 100 irhd). Determination of hardness.
NF T46-028:1976 Vulcanized rubbers of low hardness (10 to 35 irhd). Determination of hardness.
NF ISO 48-3:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 3: hardness under constant load using the very low hardness (VLRH) scale
NF T46-003-3*NF ISO 48-3:2018 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 3 : dead-load hardness using the very low rubber hardness (VLRH) scale
NF T47-404-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2 : Shore-type durometer method.
NF ISO 48-5:2018 Vulcanized or thermoplastic rubber - Determination of hardness - Part 5: penetration hardness by the pocket durometer method calibrated in DIDC
NF T47-404-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1 : IRHD method.
NF EN ISO 6769:2022 Vitrified enamels - Determination of surface hardness according to the Mohs scale
NF ISO 2804:1997 Drawing and drawing dies - Raw hard metal carbide cores - Dimensions
NF B53-674*NF EN 14951:2006 Solid hardwood panelling and cladding - Machined profiles elements

Korean Agency for Technology and Standards (KATS)

KS M ISO 2039-2-2008(2018) Plastics－Determination of hardness－Part 2：Rockwell hardness
KS M ISO 2039-2:2008 Plastics－Determination of hardness－Part 2：Rockwell hardness
KS M ISO 2039-2-2023 Plastics－Determination of hardness－Part 2：Rockwell hardness
KS M ISO 868-2021 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 868-2016(2021) Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS A ISO 9177-3-2007 Mechanical pencils－Part 3：Black leads－Bending strengths of HB leads
KS B 5538-1993 Micro hardness testing machines for vickers and knoop hardness
KS M ISO 7619-1:2011 Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 1:Durometer method(Shore hardness)
KS M ISO 868:2011 Plastics and ebonite-Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 868:2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 7619-1:2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS B ISO 1651:2013 Hardmetal(carbide) core tube drawing plugs－Dimension
KS B ISO 1651:2012 Industrial automation systems and integration - Product data representation and exchange - Part 1651: Application module: Basic curve
KS B 5538-1993(2003) MICRO HARDNESS TESTING MACHINES FOR VICKERS AND KNOOP HARDNESS
KS M ISO 7619-1-2021 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 7619-1-2016(2021) Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 1：Durometer method(Shore hardness)
KS M ISO 7267-2-2010(2015) Rubber-covered rollers－Determination of apparent hardness－Part 2：Shore-type durometer method
KS G ISO 9177-3:2014 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS M ISO 7267-2-2021 Rubber-covered rollers－Determination of apparent hardness－Part 2：Shore-type durometer method
KS G ISO 9177-3:2017 Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads
KS G ISO 9177-3:2002 Mechanical pencils-Part 3:Black leads-Bending strengths of HB leads
KS C IEC 60424-3-2022 Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
KS M 7077-2006 BOARD-DETERMINATION OF STIFFNESS BY TABER STIFFNESS TESTER
KS D ISO 3738-1-2002(2012) Hardmetal－Rockwell hardness test(scale A)－Part 1：Test method
KS B ISO 4547:2003 Metallic materials－Hardness test－Calibration of standardized blocks to be used for Knoop hardness testing machines
KS M ISO 7267-2:2010 Rubber-covered rollers－Determination of apparent hardness－Part 2：Shore-type durometer method
KS C IEC 60424-2-2022 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS M ISO 7267-1:2010 Rubber-covered rollers－Determination of apparent hardness－Part 1：IRHD method
KS B 5538-2004 MICRO HARDNESS TESTING MACHINES FOR VICKERS AND KNOOP HARDNESS
KS C IEC 60424-4-2022 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores

GSO

GSO ISO 2039-2:2021 Plastics — Determination of hardness — Part 2: Rockwell hardness
BH GSO ISO 2039-2:2022 Plastics — Determination of hardness — Part 2: Rockwell hardness
GSO ISO 4545-4:2013 Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values
BH GSO ISO 868:2016 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
GSO ISO 7619-1:2014 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
OS GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
OS GSO ISO 7619-1:2014 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
GSO ISO 6506-4:2013 Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values
OS GSO ISO 6506-4:2013 Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values
BH GSO ISO 6507-4:2023 Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
GSO ISO 6507-4:2022 Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
GSO ISO 7267-2:2015 Rubber-covered rollers -- Determination of apparent hardness -- Part 2: Shore-type durometer method
BH GSO ISO 7267-2:2016 Rubber-covered rollers -- Determination of apparent hardness -- Part 2: Shore-type durometer method
OS GSO IEC 60424-3:2014 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores
GSO 1466:2002 Metals hardness values tabels: test of tensile and hardness
OS GSO 1466:2002 Metals hardness values tabels: test of tensile and hardness
BH GSO IEC 60424-2:2016 Guidance of the limits of surface irregularities of ferrite cores - Part 2: RM-cores
BH GSO ISO 9177-3:2017 Mechanical pencils -- Part 3: Black leads -- Bending strengths of HB leads
OS GSO IEC 60424-2:2014 Guidance of the limits of surface irregularities of ferrite cores - Part 2: RM-cores

Danish Standards Foundation

DS/EN ISO 2039-2:1999 Plastics - Determination of hardness - Part 2: Rockwell hardness
DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DS/EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
DS/EN ISO 6506-4:2006 Metallic materials - Brinell hardness test - Part 4: Table of hardness values
DS/EN ISO 4545-4:2006 Metallic materials - Knoop hardness test - Part 4: Table of hardness values
DS/ISO 1818:1979 Vulcanized rubber of low hardness (10 to 35 IRHD). Determination of hardness
DS/ISO 1400:1979 Vulcanized rubbers of high hardness (85 to 100 IRHD). Determination of hardness
DS/ISO 48:1989 Vulcanized rubbers. Determination of hardness (Hardness between 30 and 85 IRHD)
DS/EN ISO 3738-1:2010 Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method
DS/ISO 7619:1989 Rubber. Determination of indentation hardness by means of pocket hardness meters
DS/EN 60424-2:1998 Guidance of the limits of surface irregularities of ferrite cores - Part 2: RM-cores
DS/ISO 7267/1:1987 Rubber covered rollers. Determination of apparent hardness. Part 1: IRHD method

Indonesia Standards

SNI ISO 2039-2:2011 Plastics - Determination of hardness - Part 2: Rockwell hardness
SNI 06-4999-1999 Determination of hardness of vulcanized rubber by shore durometer

RU-GOST R

GOST R ISO 7619-1-2009 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method of measurement (Shore hardness)
GOST 24621-2015 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST R ISO 4545-4-2015 Metallic materials. Knoop hardness test. Part 4. Table of hardness values
GOST 24621-1991 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 16240-1970 Chill moulds. Clearances between guides of metal cores and chill mould
GOST 24622-1991 Plastics. Determination of hardness. Rockwell hardness
GOST 24672-1981 Gauges for taper thread. Specifications

IECQ - IEC: Quality Assessment System for Electronic Components

PQC 38-1984 Magnetic Cores of Magnetically Hard Ferrites Generic Specification

ZA-SANS

SANS 6507-4:2008 Metallic materials - Vickers hardness test Part 4: Tables of hardness values
SANS 6506-4:2008 Metallic materials - Brinell hardness test Part 4: Table of hardness values
SANS 7619-1:2009 Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 1: Durometer method (Shore hardness)
SANS 5870:2008 Hardness of vulcanized rubbers of hardness 30-95 IRH degrees
SANS 5870:1976 Hardness of vulcanized rubbers of hardness 30-95 IRH degrees
SANS 10048:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)

CEN - European Committee for Standardization

EN ISO 6507-2:1997 Metallic Materials - Vickers Hardness Test - Part 2: Verification of Testing Machines
EN ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines

YU-JUS

JUS G.S2.525-1984 Plastics. Determination of indentation hardness by means of a durometer (Shore hardness)
JUS G.S2.125-1986 Rubber. Determination of Indentation hardness of a durometer (hardness Shore A and D)
JUS C.A4.040-1986 Mechanical testing of metals. Hardness test. Vickers test (HV 0,2 to less than HV 5)
JUS B.D8.064-1983 Ceramic tiles. Determination of hardness (by Mohs)

TR-TSE

TS 2611-1977 EBON?TE - DETERMINATION OF HARDNESS BY MEANS OF A DUROMETER

VN-TCVN

TCVN 4502-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer (Shore hardness)
TCVN 258-4-2007 Metallic materials.Vickers hardness test.Part 4:Tables of hardness values
TCVN 256-4-2007 Metallic materials.Brinell hardness test.Part 4:Table of hardness values
TCVN 5887-4-2008 Metallic materials.Knoop hardness test.Part 4: Table of hardness values
TCVN 258-3-2007 Metallic materials.Vickers hardness test.Part 3:Calibration of reference blocks
TCVN 256-3-2006 Metallic materials.Brinell hardness test.Part 3:Calibration of reference blocles
TCVN 258-2-2007 Metallic materials.Vickers hardness test.Part 2:Test merhod

TH-TISI

TIS 2245-2005 Plastics and ebonite.determination of indentation hardness by means of a durometer (shore hardness)
TIS 2169.3-2004 Vickers hardness test for metallic materials.part 3: cakubration of reference blocks
TIS 2170.3-2004 Brinell hardness test for metallic materials.part 3: calibration of reference blocks

RO-ASRO

STAS SR ISO 868:1995 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
STAS 7156/1-1971 FIBRE BUILDING BOARDS MEDIUM-HARD, HARD AND EXTRA-HARD BOARDS. Determination of water absorption and swelling in thickness after total immersion in water.
STAS 6720-1973 Wooden packages HARDWOOD GOMPONENTS Thicknesses and widths
STAS 11333-1979 THERMOSETTING PLASTICS Hardness determination by Barcol durometer
STAS 8643-1970 PLASTICS Determination of identation hardness by means of a dnrometer Shore
STAS 7855/2-1978 CHIPBOARDS Determination of Brinell hardness
STAS SR ISO 3878:1992 Hardmetals - Vickers hardness test

FI-SFS

SFS-ISO 868 E:1986 This standard is approved in English

ES-UNE

UNE-EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018)
UNE-EN ISO 4545-4:2018 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017)
UNE-EN IEC 63182-3:2022 Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: E-cores (Endorsed by Asociación Española de Normalización in March of 2022.)

SE-SIS

SIS SS 16 13 53-1984 Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
SIS SS 11 25 10-1982 Metallic materials — Hardness test — Brinell test
SIS SS 11 25 10-1980 Metallic materials — Hardness test — Brinell test
SIS MNC 1101-1980 Meta I lic materials — Hardness test — Calculation of Brinell hardness values

CZ-CSN

CSN 62 1431-1993 Rubber, plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
CSN 99 4442-1989 Indenters for hardness testing machines Methods of verification
CSN 62 1433-1981 Vulcanized rubbers. Determination of hardness. (Hardness between 30 and 85 IRHD)
CSN ISO 6506:1993 Metallic materials. Hardness test. Brinell test

GM North America

GM GM9053P-1989 Hardness Test and Hardness Number Conversions

AENOR

UNE-ISO 7619-1:2011 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
UNE-EN ISO 2039-2:2000 PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS (ISO 2039-2:1987)
UNE-EN ISO 4545-4:2006 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2005)
UNE-EN ISO 6506-4:2015 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014)
UNE-EN ISO 6507-4:2007 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO 6507-4:2005)

Society of Automotive Engineers (SAE)

SAE J417-1983 Hardness Tests and Hardness Number Conversions
SAE AMS3725B-2012 Core, Polyurethane Foam (Polyether), Rigid, Cellular
SAE AMS3725A-1984 Core, Polyurethane Foam (Polyether), Rigid, Cellular

BE-NBN

NBN 748-21-1971 Surface hardness measurement. Hardness index
NBN 432-1956 Hardness determination

Lithuanian Standards Office

LST EN ISO 2039-2:2002 Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987)
LST EN ISO 868:2004 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
LST EN ISO 4545-4:2006 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2005)
LST EN ISO 6506-4:2015 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014)
LST EN ISO 6506-4:2006 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2005)
LST EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO 6507-4:2005)
LST EN 60424-3-2002 Ferrite cores. Guide on the limits of surface irregularities. Part 3: ETD-cores and E-cores (IEC 60424-3:1999)

SAE - SAE International

SAE J417-2018 Hardness Tests and Hardness Number Conversions

DIN

DIN 50190-4:1996 Hardness Depth of Heat-Treated Parts - Part 4: Determination of the Fusion Hardening Depth - GERMAN ONLY

IT-UNI

UNI 7479-1975 Machinery for hardness testing. Vickers hardness. test
UNI 7476-1975 Machinery for hardness testing. Cloth hardness. test

HU-MSZT

MSZ KGST 2003-1979 Hardness measurement of powder metallurgy hard metal Rockwell hardness tester
MNOSZ 22302-1955 Hardness testing, artificial hardness testing, Bolti hammer

IN-BIS

IS 7096-1981 Hardness test method for metal materials hardness tester
IS 7172-1984 Calibration method of hardness tester
IS 13360 Pt.5/Sec.11-1992 Plastics—Test Methods Part 5 Mechanical Properties Section 11: Determination of Indentation Hardness (Shore Hardness) of Plastics by Durometer
IS 11524-1986 Specification for carbide mandrels for pipe drawing dies

BSI

BS 215:1926 Hard drawn aluminium and steel cored aluminium conductors for overhead power transmission purposes

ES-AENOR

UNE 7-423 Pt.2-1986 metallic material. Hardness test. Vickers hardness test. Part 2: HV0.2 to HV5

GM Europe

GME B 040 0098-1995 hardness oil

Standard Association of Australia （SAA）

AS 1816.4:2007 Metallic materials - Brinell hardness test - Table of hardness values

PT-IPQ

NP ISO 7619:2001 Rubber Determination od indentation hardness by means of packet hardness meters

American National Standards Institute （ANSI)

ANSI/TAPPI T834 om-2012 Determination of containerboard roll hardness

International Truck and Engine Corporation (ITEC)

INTERN CEMS GT-4D-2009 Hardness Of Paint

European Committee for Electrotechnical Standardization（CENELEC）

EN 60424-2:1997 Guidance of the Limits of Surface Irregularities of Ferrite Cores - Part 2: RM-Cores

Others: Film Core Hardness,ISO 16859-1-2015 Leeb hardness test for metallic materials - Part 1 Test method,Core Rockwell Hardness Tester,carbon core hardness,Rockwell Hardness Part 2,Rockwell hardness test for metallic materials - Part 1: Test method