Products and test pieces

Products and test pieces, Total:476 items.

The international standard classification for "Products and test pieces" includes: Films and sheets , Petroleum products in general , Printed circuits and boards , Braking systems , Rubber , Other products of the textile industry , Testing of metals , Enamels , Textile floor coverings , Concrete and concrete products , Motorcycles and mopeds .

The Chinese standard classification for "Products and test pieces" includes: Plastic profile , Petroleum products in general , Basic standards and general methods for synthetic resin and plastic , Printed circuit , Other non-metal mine product , Rubber products in general , Other textile articles , Powder metallurgy material and product , Daily use enamel products , Basic standards and general methods , General examination instrument , Cast stone , Transmission and braking system .

Taiwan Provincial Standard of the People's Republic of China

CNS 13402-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates─ Rating of test specimens and manufactured articles subjected to corrosion tests
CNS 14502-2001 Steel and steel products-Location and preparation of samples and test pieces for mechanical testing
CNS 13566-1995 Practice for Operational Procedures /Inspection and Quality Control of First-Generation,Silver Microform of Documents

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22311-2008 Road vehicles - Brake linings - Compressive strain test method
GB/T 5096-1985 Petroleum products--Corrosiveness to copper--Copper strip test
GB/T 26736-2011 Road vehicles - Brake linings - Test method for resistance to water, saline solution, oil and brake fluid
GB/T 33016-2016 Test methods for bongding sheet for multilayer printed boards
GB/T 17783-1999 Rubber, vulcanized - Preparation of samples and test pieces - Chemical tests
GB/T 6884-1986 Hardmetal products-Sampling and testing
GB/T 22311-2023 Road vehicles—Brake linings—Compressive strain test method
GB/T 38092-2019 Vitreous and porcelain enamels—Determination of fluidity behaviour—Fusion flow test
GB/T 5096-2017 Test method for corrosiveness to copper from petroleum products by copper strip test
GB/T 38168-2019 Vitreous and porcelain enamel finishes—Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
GB/T 1038.1-2022 Plastics—Film and sheeting—Determination of gas-transmission rate—Part 1:Differential-pressure methods
GB/T 43446-2023 Hair products—Testing method for drapability
GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
GB/T 11049-1989 Textile floor coverings; Burning behavior; Tablet test at ambient temperature
GB 5096-1985 Petroleum products; Corrosiveness to copper; Copper strip test
GB/T 1038.2-2022 Plastics—Film and sheeting—Determination of gas-transmission rate—Part 2:Equal-pressure methods

Professional Standard - Petrochemical Industry

SH/T 0218-1993 Anti-rust oil test piece preparation method
SH/T 0218-1992 Anti-rust oil test piece preparation method

Professional Standard - Commodity Inspection

SN/T 5161-2019 Dangerous goods-Fragment impact test method of division 1.6 article

Group Standards of the People's Republic of China

T/CIQA 107-2025 Qualitative test for Staphylococcus aureus in milk and dairy products - Petrifilm test strip method
T/HNSPXH 012-2021 Jujube products

Professional Standard - Building Materials

JC/T 260-1993 Test methods for properties of cast stone products - abrasion resistance test
JC/T 259-1993 Performance test method for cast stone products - Impact toughness test
JC/T 2267-2014 Anti-noise brake pads shims: T-pull test
JC/T 2271-2014 Road vehicles. Brake lining assemblies. Inertia dynamometer test method
JC/T 260-2001 Testing methods for the properties of cast stone products Resistance-to-abrasion test
JC/T 263-1993 Performance test method for cast stone products - Bending strength test

Professional Standard - Machinery

JB 3937-1985 Automobile brake lining density test method

Professional Standard - Automobile

QC/T 227.1-2009 Test methods of the friction perfamance of brake lining for motorcycles and mopeds
QC/T 227.1-1997 Test methods of the friction performance of brake lining for motorcycles and mopeds
QC/T 583-1999 Test Methods for Lining Apparent Porosity of Automotive Brake
QC/T 472-1999 Motor Vehicles - Brake Linings Resistance to Water, Saline Solution, Oil and Brake Fluid - Test Procedure

Professional Standard - Speciality

ZB/T T24006-1989 Test method for apparent porosity of automobile brake lining

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2080-2013 Preparation of polyethylene molded test pieces and test specimens

National Metrological Technical Specifications of the People's Republic of China

JJF(建材) 181-2021 Brake lining compression and thermal expansion testing machine calibration specification
JJF(建材) 192-2023 Brake lining shear strength test machine calibration specification

Professional Standard - Agriculture

JB/T 51217.2-1994 Test methods for product quality classification of movable blades and fixed blades of agricultural machinery cutters

Ente Nazionale Italiano di Unificazione

UNI EN ISO 377:1999 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
UNI EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
UNI ISO 4661-2:1990 Rubber, vulcanized. Preparation of samples and test pieces. Chemical tests.
UNI EN ISO 5269-2:2003 Pulps - Preparation of laboratory sheets for physical testing - Rapid-Köthen method
UNI EN ISO 5269-1:2002 Pulps - Preparation of laboratory sheets for physical testing - Conventional sheet-former method
UNI EN 993-3:1999 Methods of test for dense shaped refractory products - Test methods for carbon-containing refractories
UNI EN ISO 2160:1997 Petroleum products. Corrosiveness to copper. Copper strip test.
UNI EN 1183:1999 Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance.
UNI EN 1217:1999 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
UNI EN ISO 1461:1999 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods
UNI ISO 6310:1991 Road vehicles. Brake linings. Compressibility. Test procedure.
UNI ISO 4661-1:1990 Rubber, vulcanized. Preparation of samples and test pieces. Physical tests.
UNI EN 10218-1:1995 Steel wiire and wire products. General. Test methods.
UNI EN 350:2016 Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials
UNI EN 1184:1999 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
UNI EN ISO 4044:2008 Leather - Chemical tests - Preparation of chemical test samples
UNI EN 12600:2004 Glass in building - Pendulum test - Impact test method and classification for flat glass
UNI EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
UNI EN ISO 4044:2017 Leather - Chemical tests - Preparation of chemical test samples
UNI ISO 6311:1991 Road vehicles. Brake linings. Internal shear strength of lining material. Test procedure.
UNI ENV 1094-7:1997 Insulating refractory products. Methods of test for ceramic fibre products.
UNI EN ISO 661:2005 Animal and vegetable fats and oils - Preparation of test sample
UNI EN ISO 2419:2012 Leather - Physical and mechanical tests - Sample preparation and conditioning

Swedish Institute for Standards

SS-EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
SS-EN ISO 15792-1:2020 Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
SS-EN ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2013, Corrected version 2015-06-01)
SS 251215:1981 Textiles - Preparation of laboratory test samplesand test specimens for chemical testing
SS-EN 1067:1997 Adhesives - Examination and preparation of samples for testing
SS-EN 326-1:1994 Woodbased-panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
SS-ISO 6312:2010 Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies (ISO 6312:2010, IDT)
SS-EN 1184:1997 Materials and articles in contact with foodstuffs- Test methods for translucency of ceramic articles
SS-ISO 4661-2:2018 Rubber, vulcanized - Preparation of samples and test pieces - Part 2: Chemical tests (ISO 4661-2:2018, IDT)
SS-EN ISO 1513:1995 Paints and varnishes - Examination and preparation of samples for testing (ISO 1513:1992)
SS-ISO 6310:2001 Road vehicles - Brake linings - Compressive strain test method
SS-ISO 21993:2020 Paper and pulp - Deinkability test for printed paper products (ISO 21993:2020, IDT)
SS-ISO 6311:1981 Road vehicles - Brake linings - Internal shear strength of lining material - Test procedure
SS-EN ISO 2160:1998 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)

German Institute for Standardization

DIN 16906:2007-10 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN EN 14474:2005-03 Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods; German version EN 14474:2004
DIN ISO 6313:1981 Road vehicles; brake linings; effects of heat on dimensions and form of disc brake pads; test procedure
DIN EN 14474 E:2002-07 Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods
DIN EN ISO 377 E:2017-03 Positioning and preparation of specimens and specimens for mechanical testing of steel and steel products (draft)
DIN EN ISO 377 E:2012-04 Positioning and preparation of specimens and specimens for mechanical testing of steel and steel products (draft)
DIN 16906:2015-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
DIN EN ISO 2160:1999 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998); German version EN ISO 2160:1998
DIN EN 1217:1998-01 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles; German version EN 1217:1998
DIN EN 1184:1997-08 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles; German version EN 1184:1997
DIN 86076:2007 Gasket sheets for ship building - Requirements and tests
DIN 10355:1991 Milled cereal products; requirements, types and testing
DIN EN 993-3:1997 Methods of test for dense shaped refractory products - Part 3: Test methods for carbon-containing refractories; German version EN 993-3:1997
DIN EN 13258:2003-07 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles; German version EN 13258:2003
DIN EN 492 A2 E:2017-05 Product specifications and test methods for fiber cement tiles and related components
DIN EN ISO 5089:2016-09 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977); German version EN ISO 5089:2016
DIN 12851:1974-12 Laboratory porcelain; requirements, methods of test
DIN 53281:2006 Testing of adhesively bonded joints - Preparation of test specimens

Korean Agency for Technology and Standards (KATS)

KS R 1072-2008(2023) Method of hardness test for brake linings,pads and clutch facings of automobiles
KS M ISO 23559-2019(2024) Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS R 0079-2013(2023) Wear test procedure on inertia dynamometer-brake lining and pad
KS R 1099-2005 Test procedure of specific gravity for brake linings and pads of automobiles
KS R 1100-2005(2020) Test procedure of porosity for brake linings andpads of automobiles
KS R 1100-2005 Test procedure of porosity for brake linings andpads of automobiles
KS R 1101-2005 Test procedure of rusting at materialinterfaces for disc brake pads of automobiles
KS R 1098-2005 Test procedure of thermal expansion for brake linings and pads of automobiles
KS R ISO 6312-2014(2024) Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies
KS R 1072-2008 Method of hardness test for brake linings,pads and clutch facings of automobiles
KS R ISO 6312-2019 Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies
KS R ISO 7629-2015(2020) Road vehicles－Brake linings－Disc brake pads－Evaluation of surface and material flaws after testing
KS D ISO 377:2002 Steel and steel products-Location and preparation of samples and test pieces for mechanical testing
KS R 1072-1988 Method of hardness test for brake linings,pads and clutch facings of automobiles
KS D ISO 377:2013 Steel and steel products－Location and preparation of samples and test pieces for mechanical testing
KS M ISO 4661-2:2009 Rubber, vulcanized-Preparation of samples and test pieces-Part 2:Chemical tests
KS R 1072-2008(2018) Method of hardness test for brake linings,pads and clutch facings of automobiles
KS R 1089-1999 Test procedure of seizure to ferrous matingsurface due to corrosion forbrake linings and pads of automobiles
KS R ISO 6312:2014 Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies
KS R ISO 6313-2003(2023) Road vehicles－Brake linings－Effects of heat on dimensionsand form of disc brake pads－Test procedure
KS R ISO 6313-2003(2018) Road vehicles－Brake linings－Effects of heat on dimensionsand form of disc brake pads－Test procedure
KS R ISO 6312:2008 Road vehicles-Brake linings-Shear test procedure for disc brake pad and drum brake shoe assemblies
KS R 1104-1991 Shear strength test procedure for drum brake shoe assemblies and pads of automobiles
KS D ISO 4739:2013 Wrought copper and copper alloy products－Selection and preparation of specimens and test pieces for mechanical testing
KS D ISO 4739:2012 Wrought copper and copper alloy products-Selection and preparation of specimens and test pieces for mechanical testing
KS M ISO 1513:2012 Paints and varnishes－Examination and preparation of test samples
KS R 1098-2013 Test procedure of thermal expansion for brake linings and pads of automobiles
KS K 0820-2008 Test methods for feather and down
KS K ISO 5089:2014 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
KS X ISO 8514-1:2002 Micrographics-Alphanumeric computer output microforms-Quality control-Part 1:Characteristics of the slide and test data
KS R 1102-2013 TEST PROCEDURE OF DETERIORATION BY WATER, SALT WATER, OIL AND BRAKE FLUID FOR BRAKE LININGS AND PADS OF AUTOMOBILES
KS X ISO 8514-1:2013 Micrographics － Alphanumeric computer output microforms － Quality control － Part 1: Characteristics of the slide and test data
KS M ISO 2160-2012(2017) Petroleum products－Corrosiveness to copper－Copper strip test
KS K ISO 5089:2007 Textiles-Preparation of laboratory test samples and test specimens for chemical testing
KS K 0820-1993 Test methods for feather and down
KS D ISO 4739-2013 Wrought copper and copper alloy products－Selection and preparation of specimens and test pieces for mechanical testing
KS R 9241-2005 Method of performance test and inspection methodsfor cast iron brake shoes of railway rolling stock
KS M ISO 5269-1:2016 Pulps － Preparation of laboratory sheets for physical testing － Part 1: Conventional sheet-former method
KS M ISO 5269-1:2021 Pulps — Preparation of laboratory sheets for physical testing —Part 1: Conventional sheet-former method
KS R 0079-2023 Wear test procedure on inertia dynamometer-brake lining and pad
KS L 3002-2013 Vitreous and porcelain enamels — Quality test methods of enamelled products
KS B 4104-2014(2020) Veneer slicers — Test and inspection methods
KS B 4104-2020 Veneer slicers — Test and inspection methods
KS M ISO 5269-1-2016 Pulps － Preparation of laboratory sheets for physical testing － Part 1: Conventional sheet-former method
KS M ISO 5269-1-2021 Pulps — Preparation of laboratory sheets for physical testing —Part 1: Conventional sheet-former method
KS I 4051-2023 Test methods for remanufactured vane pump of industrial machines
KS R 1102-2001(2011) TEST PROCEDURE OF DETERIORATION BY WATER, SALT WATER, OIL AND BRAKE FLUID FOR BRAKE LININGS AND PADS OF AUTOMOBILES
KS H ISO 3402:2013 Tobacco and tobacco products－Atmosphere for conditioning and testing
KS C 6505-1987 test records
KS D ISO 4739-2012 Wrought copper and copper alloy products－Selection and preparation of specimens and test pieces for mechanical testing
KS H ISO 3402-2013(2018) Tobacco and tobacco products－Atmosphere for conditioning and testing
KS H ISO 3402-2013(2023) Tobacco and tobacco products－Atmosphere for conditioning and testing
KS L 4009-2013(2023) Testing method for moisture expansion of fired whiteware products and ceramic tiles
KS H ISO 3402-2024 Tobacco and tobacco products — Atmosphere for conditioning and testing
KS R ISO 6310-2024 Road vehicles — Brake linings — Compressive strain test methods
KS L 4009-2023 Testing method for moisture expansion of fired whiteware products and ceramic tiles
KS R ISO 6311-2022 Road vehicles－Brake linings－Internal shear strength of lining material－ Test procedure
KS R ISO 6312-2014(2019) Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies
KS H ISO 3402:2008 Tobacco and tobacco products-Atmosphere for conditioning and testing
KS R ISO 6311-2017(2022) Road vehicles－Brake linings－Internal shear strength of lining material－ Test procedure
KS M ISO 4044:2007 Leather－Preparation of chemical test samples
KS R ISO 6310-2019 Road vehicles — Brake linings — Compressive strain test methods
KS R ISO 6310:2008 Road vehicles-Brake linings-Compressive strain test method
KS R ISO 6310-2014(2024) Road vehicles — Brake linings — Compressive strain test methods
KS R ISO 6310:2014 Road vehicles — Brake linings — Compressive strain test methods
KS M ISO 2418-2024 Leather — Chemical, physical, mechanical and fastness tests — Position and preparation of specimens for testing

The Directorate General of Specifications and Metrology (DGSM)

OS GSO 1792:2007 methods of test for three piece steel round cans used for canning food stuffs
OS GSO 1795:2007 methods of test for two -piece steel round cans used in canning food -stuffs
OS GSO ISO 6312:2007 Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies
OS GSO ISO 4739:2013 Wrought copper and copper alloy products -- Selection and preparation of specimens and test pieces for mechanical testing
OS GSO ISO 10635:2014 Refractory products -- Methods of test for ceramic fibre products
OS GSO 1796:2007 Methods of test for two pieces aluminum round cans used for canning food (Beverages & stuffs
OS GSO ISO 5089:2009 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
OS GSO ISO 6310:2010 Road vehicles - Brake linings – Compressive strain test method
OS GSO ISO 10060:2014 Dense, shaped refractory products -- Test methods for products containing carbon

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO 1792:2013 methods of test for three piece steel round cans used for canning food stuffs
BH GSO 1795:2013 methods of test for two -piece steel round cans used in canning food -stuffs
BH GSO ISO 10635:2016 Refractory products -- Methods of test for ceramic fibre products
BH GSO 1796:2013 Methods of test for two pieces aluminum round cans used for canning food (Beverages & stuffs
BH GSO ISO 6310:2011 Road vehicles - Brake linings – Compressive strain test method

American Society for Testing and Materials (ASTM)

ASTM D6287-98 Standard Practice for Cutting Film and Sheeting Test Specimens
ASTM D6287-09 Standard Practice for Cutting Film and Sheeting Test Specimens
ASTM D3183-02 Standard Practice for Rubber8212;Preparation of Pieces for Test Purposes from Products
ASTM D6287-05 Standard Practice for Cutting Film and Sheeting Test Specimens
ASTM D3183-09 Standard Practice for Rubber x2014; Preparation of Pieces for Test Purposes from Products
ASTM D3183-10(2015) Standard Practice for Rubber&x2014Preparation of Pieces for Test Purposes from Products
ASTM D3183-07 Standard Practice for Rubber8212;Preparation of Product Pieces for Test Purposes from Products
ASTM F434-93(1997) Standard Test Method for Blow-Out Testing of Preformed Gaskets
ASTM F434-93(2003) Standard Test Method for Blow-Out Testing of Preformed Gaskets
ASTM F434-93(2017) Standard Test Method for Blow-Out Testing of Preformed Gaskets
ASTM D3183-10 Standard Practice for Rubber x2014; Preparation of Pieces for Test Purposes from Products
ASTM A370-01 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM RR-A01-1001 2008 A0370-Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-03 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-07a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-06 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-22 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-05 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-02e1 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-07b Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A1058M-09 Standard Test Methods for Mechanical Testing of Steel Products-Metric
ASTM A370-11a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-03a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-07 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-09ae1 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM B557M-02a Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
ASTM A370-15 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-16 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM D1610-18(2023) Standard Practice for Conditioning Leather and Leather Products for Testing
ASTM RR-D13-1125 2009 D7076-Test Method for Measurement of Shives in Retted Flax
ASTM A370-17 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM B557M-14 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM A1058-09 Standard Test Methods for Mechanical Testing of Steel Products x2014; Metric
ASTM B557M-15 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM A370-13 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370-11 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

European Committee for Standardization (CEN)

EN ISO 377:2017/prA1 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing - Amendment 1 (ISO 377:2017/DAM 1:2024)
EN ISO 14729:2001 Ophthalmic Optics - Contact Lens Care Products - Microbiological Requirements and Test Methods for Products and Regimens for Hygienic Management of Contact Lenses ISO 14729:2001
EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
EN ISO 1927-5:2012 Monolithic (unshaped) refractory products - Part 5: Preparation and treatment of test pieces (ISO 1927-5:2012)
EN ISO 2160:1998 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
EN ISO 14729:2001/A1:2010 Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses - Amendment 1 (ISO 14729:2001/Amd 1:2010)
DD ENV 13258-1998 Materials and Articles in Contact with Foodstuffs - Test Methods for Crazing Resistance of Ceramic Articles
EN 10218-1:2012 Steel wire and wire products - General - Part 1: Test methods
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
EN 21513:1991 Paints and varnishes; examination and preparation of samples for testing (ISO 1513:1980)
EN ISO 1513:1994 Paints and Varnishes - Examination and Preparation of Samples for Testing (ISO 1513:1992)
EN ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing

Standards Norway

NS-EN 14474:2004 Precast concrete products — Concrete with wood-chips as aggregate — Requirements and test methods
NS-EN 13258:2003 Materials and articles in contact with foodstuffs — Test methods for crazing resistance of ceramic articles
NS-EN 1217:1997 Materials and articles in contact with foodstuffs — Test methods for water absorption of ceramic articles
NS-EN 1184:1997 Materials and articles in contact with foodstuffs — Test methods for translucency of ceramic articles

Japanese Industrial Standards Committee (JISC)

JIS K 6250:2006 Rubber -- General procedures for preparing and conditioning test pieces for physical test methods
JIS K 6250:2019 Rubber -- General procedures for preparing and conditioning test pieces for physical test methods
JIS D 4415:1996 Test procedure of shear strength for brake linings and pads of automobiles
JIS D 4416:1996 Test procedure of thermal expansion for brake linings and pads of automobiles
JIS G 0416:1999 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
JIS G 0416:2006 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
JIS G 0416:2014 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
JIS D 4414:1996 Test procedure of seizure to ferrous mating surface due to corrosion for brake linings and pads of automobiles
JIS D 4417:1986 Test procedure of specific gravity for brake linings and pads of automobiles
JSA JIS D 4415 Motor vehicle parts - Brake pads and disc brake linings - Shear strength test method
JIS D 4419:1986 Test procedure of rusting at material interfaces for disc brake pads of automobiles
JIS D 4413:2005 Automotive parts -- Brake linings and brake pads -- Compressive strain test method
JIS D 4421:1996 Method of hardness test for brake linings, pads and clutch facings of automobiles
JIS D 4420:1986 Test procedure of deterioration by water , salt water, oil and brake fluid for brake linings and pads of automobiles
JSA JIS D 4422 Shear test procedure for automotive brake shoe assemblies and brake disc pads
JIS H 8661:1994 Test methods for zinc sprayed coatings
JIS H 8662:1961 Testing methods for lead spray products
JIS B 6599:1991 Veneer slicers -- Test and inspection methods
JIS H 8663:1994 Test methods for aluminium sprayed coatings

International Organization for Standardization (ISO)

ISO 4661-1:1993 Rubber, vulcanized or thermoplastic; preparation of samples and test pieces; part 1: physical tests
ISO 5089:1977 Textiles; Preparation of laboratory test samples and test specimens for chemical testing
ISO 4661-2:2018 Rubber, vulcanized - Preparation of samples and test pieces - Part 2: Chemical tests
ISO 4661-2:1987 Rubber, vulcanized; Preparation of samples and test pieces; Part 2 : Chemical tests
ISO 5089 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
ISO 6312:2010 Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies
ISO 5022 Shaped refractory products - Sampling and acceptance testing
ISO 5022:1979 Shaped refractory products; Sampling and acceptance testing
ISO 1513:1992 Paints and varnishes; examination and preparation of samples for testing
ISO 1116:1975 Microcopying; 16 mm and 35 mm microfilms, spools and reels
ISO 1513:1973 Title missing - Legacy paper document
ISO 2160:1985 Petroleum products; Corrosiveness to copper; Copper strip test
ISO 8514-1:1992 Micrographics; alphanumeric computer output microforms; quality control; part 1: characteristics of the test slide and test data
ISO 10059-2:2003 Dense, shaped refractory products - Determination of cold compressive strength - Part 2: Test with packing
ISO 2160:1972 Petroleum products — Corrosiveness to copper — Copper strip test
ISO 8261:2001 Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination
ISO 5269-1:1979 Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method
ISO 1920-3:2004 Testing of concrete - Part 3: Making and curing test specimens
ISO 2160:1998 Petroleum products - Corrosiveness to copper - Copper strip test
ISO 3402:1999 Tobacco and tobacco products - Atmosphere for conditioning and testing
ISO 377:1997 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
ISO 6311:1980 Road vehicles; Brake linings; Internal shear strength of lining material; Test procedure
ISO 10059-1:1992 Dense, shaped refractory products; determination of cold compressive strength; part 1: referee test without packing
ISO/TR 21828:2010 Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
ISO 10635:1999 Refractory products - Methods of test for ceramic fibre products
ISO 4044:2017 | IULTCS/IUC 3 Leather — Chemical tests — Preparation of chemical test samples
ISO 3402:1978 Tobacco and tobacco products — Atmospheres for conditioning and testing
ISO 6310:2001 Road vehicles - Brake linings - Compressive strain test method
ISO 6312:2001 Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies
ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
ISO 2418:2023 Leather — Chemical, physical, mechanical and fastness tests — Position and preparation of specimens for testing
ISO 2419:2002 | IULTCS/IUP 1 ET IULTCS/IUP 3 Leather — Physical and mechanical tests — Sample preparation and conditioning
ISO 8261:1989 Milk and milk products — Preparation of test samples and dilutions for microbiological examination
ISO 6310:2009 Road vehicles - Brake linings - Compressive strain test methods

Bureau of Indian Standards

IS 15478-2-2004 Meat and Meat Products - Sampling and Preparation of Test Samples - Part 2 : Preparation of Test Samples for Microbiological Examination
IS 15279-2003 Sugar and Sugar Products - Methods of Test
IS 2742-7-2018 Automotive Vehicles —— Brake Linings Part 7 Shear Test Procedure for Disc Brake Pad and Drum Brake Shoe Assemblies
IS 2742-3-1994 Automotive vehicles - Brake linings Part 3 Methods of test
IS 1448-15-2004 Methods of Test for Petroleum and Its Products - Part 15: Petroleum Products - Corrosiveness to Copper - Copper Strip Test
IS 11852-7-2001 Automotive Vehicles - Brakes and Braking Systems - Part 7 : Inertia Dynamometer Test Method for Brake Lining
IS 1448-51-2023 Methods Of Test For Petroleum And Its Products Part 51 Copper Strip Corrosion Test For Lubricating Greases
IS 8543-3-2-1978 Methods of Testing Plastics - Part III : Preparation of Test Specimens - Section 2 : Injection Moulded Test Specimens

Society of Automotive Engineers (SAE)

SAE J840_201711 Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining Assemblies
SAE J840B_196801 Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining Assemblies
SAE J840C_197105 Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining Assemblies
SAE J840_198208 Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining Assemblies
SAE J840_200708 Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining Assemblies
SAE J661_199702 Brake Lining Quality Control Test Procedure
SAE J661-1997 Brake Lining Quality Control Test Procedure
SAE J661_198708 Brake Lining Quality Control Test Procedure
SAE J840_199806 Test Procedures for Brake Shoe and Lining Bonds
SAE J840_196211 Test Procedures for Brake Shoe and Lining Bonds
SAE J661_201211 Brake Lining Quality Test Procedure
SAE J661A_196704 Brake Lining Quality Test Procedure
SAE J661A_197109 Brake Lining Quality Test Procedure
SAE J661_202110 Brake Lining Quality Test Procedure
SAE J2468_199904 Road Vehicles-Brake Linings-Compressibility Test Procedure
SAE J2468-2006 Road Vehicles Brake Lingings Compressibility Test Procedure

Gosstandart of Russia

GOST 13.1.120-1999 Reprography. Micrography. Microforms with vesicular films. General technical requirements and methods of control
GOST 4288-1976 Culinary products and half-finished products of minced meat. Rules of acceptance and test methods
GOST ISO 6310-2014 Brake linings. Compressive strain test methods
GOST R ISO 5089-1999 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
GOST R ISO 1182-2014 Fire tests for construction materials and products. Non-combustibility test
GOST 314-1972 Felt, felt parts, felt piece goods. Acceptance rules and test methods
GOST 30364.0-1997 Egg products. Methods of sampling and organoleptic analysis
GOST ISO 356-2014 Essential oils. Preparation of test samples
GOST ISO 4044-2014 Leather. Chemical tests. Preparation of chemical test samples
GOST 28741-1990 Potato food products. Acceptance, sample preparation and test methods
GOST R 54495-2011 Glass and glass products. Fire resistance test method
GOST ISO 6312-2014 Brake linings. Shear test method for disc brake pad and drum brake shoe assemblies
GOST 938.30-1978 Leather. Test methods for brittleness and fragility
GOST 25552-1982 Twisted and plaited goods. Methods of tests
GOST 8179-1998 Refractory products. Sampling and acceptance testing
GOST 33088-2014 Glass and glass products. Humidity resistance test method
GOST 32080-2013 Liqueur-vodka products. Acceptance rules and test methods
GOST EN 13541-2013 Glass and glass products. Explosion resistance test method
GOST 33000-2014 Glass and glass products. Fire resistance test method
GOST 8179-1985 Refractory products. Acceptance rules
GOST 32999-2014 Glass and glass products. Salt spray resistance test method
GOST 32293-2013 Testing of chemicals of environmental hazard. Alga and Cyanobacteria, Growth Inhibition Test

Association Francaise de Normalisation

NF EN 14474:2005 Precast concrete products - Concrete using wood chips as aggregate - Requirements and test methods
NF R12-614:1988 ROAD VEHICLES. BRAKE LININGS. SHEAR STRENGTH OF DISC BRAKE PAD AND DRUM BRAKE SHOE ASSEMBLIES. TEST PROCEDURE.
NF T76-201:1982 Adhesives. Preparation of metallic substrates for testpieces intended for laboratory tests.
NF A03-112*NF EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
NF G07-158:1986 Textiles. Feather and fly items. Making of test pieces.
NF G06-001*NF EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
NF EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption by ceramic articles
NF A03-112:1997 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing.
NF EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for resistance to cracking of ceramic articles
NF P98-049:1994 Products in manufactured concrete. Precast concrete burial vaults. Characteristics and performances. Tests, marking, basis for acceptance.
NF T51-196:1980 Plastics. Guide to cold and dry heat tests.
NF T54-504:1976 Light plastics products. Bending test.
NF G52-221:2008 Leather - Chemical tests - Preparation of chemical test samples.
NF R12-612:1988 ROAD VEHICLES. BRAKE LININGS. COMPRESSIBILITY. TEST PROCEDURE.
NF V04-417:1999 Meat and meat products - Preparation of a histological section - Paraffin technique
NF G52-221*NF EN ISO 4044:2017 Leather - Chemical tests - Preparation of chemical test samples
NF EN 1184:1997 Materials and articles in contact with foodstuffs - Test methods to determine the translucency of ceramic articles
NF V18-091:1982 Animal feeding stuffs. Preparation of test samples.

Spanish Association for Standardization (UNE)

AENOR UNE-EN 14474:2006 Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods
UNE-EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles.

British Standards Institution (BSI)

BS AU 142:1968 Methods of test for brake linings materials
BS 4658:1970 Methods of test for textiles - preparation of laboratory test samples and test specimens for chemical testing
BS AU 142:1968(2000) Methods of test for Brake linings materials
BS ISO 4661-2:2018 Rubber, vulcanized. Preparation of samples and test pieces. Chemical tests
BS EN ISO 5089:2016 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
BS ISO 6312:2010 Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies
BS ISO 8514-1:2000 Micrographics - Alphanumeric computer output microforms - Quality control - Characteristics of the test slide and test data
BS EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
BS EN ISO 1513:1995 Paints and varnishes - Examination and preparation of samples for testing
BS EN ISO 2160:1995 Petroleum products. Corrosiveness to copper. Copper strip test
BS DD ENV 13258:1999 Materials and articles in contact with foodstuffs. Test methods for crazing resistance of ceramic articles
BS EN ISO 377:1997 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
BS EN 16256-5:2012 Pyrotechnic articles. Theatrical pyrotechnic articles. Test methods
BS EN 10218-1:1994 Steel wire and wire products. General.-Test methods
BS EN 16263-4:2015 Pyrotechnic articles. Other pyrotechnic articles. Test methods
BS 903-A36:1995 Physical testing of rubber-Method for preparation of samples and test pieces
BS F 153:2006(2011) Properties of oil resistant silicone rubber sheet, moulding and extrusions – Specification
BS PD ISO/TS 15791-2:2022 Plastics. Development and use of intermediate-scale fire tests for plastics products-Use of intermediate-scale tests for semi-finished and finished products
BS EN 1067:1998 Adhesives. Examination and preparation of samples for testing
BS EN 10218-1:2012 Steel wire and wire products. General. Test methods
BS 2000-1:1982 Methods of test for petroleum and its products-Acidity of petroleum products and lubricants (neutralization value)
BS ISO 10635:2000 Refractory products - Methods of test for ceramic fibre products
BS DD ENV 1094-7:1994 Insulating refractory products-Methods of test for ceramic fibre products
BS EN 12390-2:2000 Testing hardened concrete - Making and curing specimens for strength tests
BS EN ISO 2419:2002 Leather. Physical and mechanical tests. Sample preparation and conditioning
BS EN ISO 14451-2:2013 Pyrotechnic articles. Pyrotechnic articles for vehicles Test methods
BS 2064-3:1990 Diamond abrasive products-Dimensions of steel blades for segmented saws for cutting of stone and masonry

ET-QSAE

ES 539-2000 Drugs—Isoniazid Tablets Dissolution Test
ES 540-2000 Dissolution test of chloroquine phosphate tablets

Danish Standards Foundation

DS 423.21:1984 Testing of concrete, Making and curing of moulded test specimens for strength tests
DS/EN ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
DS/ISO 4661-2:1990 Rubber, vulcanized. Preparations of samples and test pieces. Part 2: Chemical tests
DS/ISO 4661-1:1989 Rubber, vulcanized. Preparation of samples and test pieces. Part 1: Physical tests
DANSK DS/ISO 6313:1981 Road vehicles - Brake linings - Effects of heat on dimensions and form of disc brake pads - Test procedure
DS/ISO 1513:1984 Paints and varnishes. Examination and preparation of samples for testing
DS/EN ISO 2160:1999 Petroleum products - Corrosiveness to copper - Copper strip test
DANSK DS/EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
DS/EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
DS/EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
DANSK DS/EN 1184:1997 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
DANSK DS/EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
DS/EN 1184:1998 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
DS/EN ISO 4044:2008 Leather - Chemical tests - Preparation of chemical test samples

GCC Standardization Organization

BH GSO ISO 7629:2024 Road vehicles - Brake linings - Disc brake pads – Evaluation of surface and material flaws after testing
BH GSO ISO 2160:2024 Petroleum products - Corrosiveness to copper - Copper strip test
GSO ISO 6310:2010 Road vehicles - Brake linings – Compressive strain test method
OS GSO ISO 1920-3:2024 Testing of concrete — Part 3: Making and curing test specimens
BH GSO ISO 6314:2024 Road vehicles - Brake linings – Resistance to water, saline solution, oil and brake fluid - Test procedure
GSO ISO 10635:2014 Refractory products -- Methods of test for ceramic fibre products
GSO 1792:2007 methods of test for three piece steel round cans used for canning food stuffs
GSO ISO 5089:2009 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
GSO ISO 2419:2015 Leather -- Physical and mechanical tests -- Sample preparation and conditioning
GSO ISO 10060:2014 Dense, shaped refractory products -- Test methods for products containing carbon

VN-TCVN

TCVN 4398-2001 Steel and steel products.Location and preparation of samples and test pieces for mechanical testing
TCVN 5669-2013 Paints and varnishes.Examination and preparation of test samples

South African Bureau of Standard

SANS 4661-2:2003 Rubber, vulcanized - Preparation of samples and test pieces Part 2: Chemical tests
SANS 5861-3:2006 Concrete tests - Making and curing of test specimens
SANS 174:1992 Paints and varnishes - Examination and preparation of samples for testing

NL-NEN

NEN 2701-1970 Testing of vitreous enamel and enamelled products
NEN 1960-1967 Testing of pulp. Sampling and preparation of sample
NEN 2702-1972 Testing of vitreous enamel and enamelled products, part 2

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC JEDEC-9707-AM1-2018 Printed Wiring Board Strain Gage Test Guideline
IPC-A-600J-2016 Printed Wiring Board Strain Gage Test Guideline
IPC-D-330-1992 Printed Wiring Board Strain Gage Test Guideline
IPC JEDEC-9703-2009 CHN Printed Wiring Board Strain Gage Test Guideline
IPC JEDEC-9702 Printed circuit board strain gauge testing guidelines
IPC-1753-2013 A1-2018 Printed Wiring Board Strain Gage Test Guideline
IPC JEDEC-9703-2009 Printed Wiring Board Strain Gage Test Guideline
IPC JEDEC-9704-2005 Printed Wiring Board Strain Gage Test Guideline
IPC JEDEC-9707 Printed circuit board strain gauge testing guidelines

SE-SIS

SIS SS 25 12 15-1981 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
SIS SS-ISO 5089:1990 Textiles — Preparation of laboratory test samples and test specimens for chemical testing.
SIS SMS 1681-1974 Screwdriver blades. Test torque of blades
SIS SS 3165-1988 Drafting film - Polyester based drafting film with mat surface - Testing

European Association of Aerospace Industries

AECMA PREN 2070-2-1984 Aluminium and Aluminium Alloy Wrought Products - Technical Specification - Part 2 - Sheet, Strip Formed Profiles and Plate Aerospace Series Edition 1

PT-IPQ

NP 27-1989 Paper and board Conditioning of samples

PL-PKN

PN P50137-1973 Paper products Torsion test
PN S47042-1992 Road vehicles. Brake linings. Effects of heat on dimensions and form of disc brake pads. Test procedure
PN P50160-1985 Paper products Determination of shives
PN S47040-1992 Road vehicles Brake linings Compressibility Test procedur?
PN R64810-1963 Starch products Povdered of flakes

RO-ASRO

SR ISO 5089:1996 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
STAS SR ISO 8261:1996 Milk and milk products - Preparation of test samples and dilutions for microbiological examination
SR 5047-1998 Leathers - Flexing test
STAS 8267-1968 Metal powder products. Stiffness test
STAS 7200-1973 PLASTICS Dotermination of thicknc;,s of films and sheets
STAS 6349/2-1980 MILK AND MILK PRODUC DUCTS Retuctase test for milk
SR ISO 4044:1996 Leather - Preparation of chemical test samples

GM North America

GM GM9215P-1988 Test for Mildew Resistance of Paper and Wood Products

BR-ABNT

ABNT NBR 15134-2020 Tissue paper and tissue products - Test method

Magyar Szabványügyi Testület

MSZ 1018-1966 Copy of test methods for paper products
MSZ 871/27-1970 Test methods for footwear products
MSZ 871/16.lap-1966 Shrinkage test method for finished leather products
MSZ 6582-1965 How to make test supplies

Lithuanian Standards Office

LST ISO 5089:1996 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
LST EN 1217-2000 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
LST EN 13258-2004 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
LST EN 1184-2000 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles

FI-SFS

NORDEST NT FIRE 018-1983 TEXTILE FLOOR COVERINGS:BURNIN6 BEHAVIOUR - TABLET TEST

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0318-1 DIN VDE 0318-1-1975*DIN 7735-1:1975 Test methods for laminated products as paper base laminates, fabric base laminates and glass-mat base laminates

Standard Association of Australia （SAA）

AS 1301.P1S:1979 Methods of test for pulp and paper (metric units) - Basic density of wood chips

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE 56-1996 Motion-Picture Film - Nomenclature for Studios and Processing Laboratories
SMPTE ST 56-2005 Motion-Picture Film - Nomenclature for Studios and Processing Laboratories
SMPTE RP 45-1972 Use and Care of Sound Test Films

The American Road & Transportation Builders Association

AASHTO T 244-2014 Standard Method of Test for Mechanical Testing of Steel Products
AASHTO T 244-2012 Standard Method of Test for Mechanical Testing of Steel Products
AASHTO T 244-2010 Standard Method of Test for Mechanical Testing of Steel Products
AASHTO T 244-2013 Standard Method of Test for Mechanical Testing of Steel Products

IT-UNI

UNI 1753-1754-1941 Elastic gasket*. regulations and tests

Military Standards (MIL-STD)

DOD A-A-53428-1988 CONTROL STRIP, REAGENT SUITABILITY

BE-NBN

NBN-EN ISO 1513:1995 Paints and varnishes - Examination and preparation of samples for testing (ISO 1513:1992)
NBN 117.05-1963 Metallurgical products. MACROGRAPHIQUE Bowman test
NBN 52.077-1960 Corrosion of copper by petroleum products (copper sheet test). Method NBN 52.077

IN-BIS

IS 5643-1989 Tobacco and tobacco products—Tobacco test methods

YU-JUS

JUS B.F8.103-1990 Road vehicles. Brake linings. Interval chear stength of lining material. Test procedure

AASHTO - American Association of State Highway and Transportation Officials

T 244-2008 Standard Method of Test for Mechanical Testing of Steel Products
T 244-2009 Standard Method of Test for Mechanical Testing of Steel Products
T 244-2006 Standard Method of Test for Mechanical Testing of Steel Products
T 244-2018 Standard Method of Test for Mechanical Testing of Steel Products
T 244-2014 Standard Method of Test for Mechanical Testing of Steel Products
T 244-2010 Standard Method of Test for Mechanical Testing of Steel Products
T 244-2013 Standard Method of Test for Mechanical Testing of Steel Products

CZ-CSN

CSN ISO 5089:1994 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
CSN 42 0891 Cast.3-1982 Hardness test for sintered products

TR-TSE

TS 3068-1978 Making And Curing Concrete Test Specimens In The Laboratory

AT-ON

ONORM EN 21513-1992 Paints and varnishes — Examination and preparation of samples for testing

American National Standards Institute （ANSI)

ANSI Z80.18-2003 Contact Lens Care Products: Vocabulary, Performance, Specifications and Test Methodology

Indonesia Standards

SNI ISO 2419:2012 Leather - Physical and mechanical tests - Sample preparation and conditioning

Others: milk and dairy products,Products and test pieces,Milk and Dairy Products - Alkaline Phosphatase,Electrically conductive and antistatic products made of soft polymeric materials,Plastics - films and sheets - tear strength,Tissue paper and tissue products iso,iso tissue paper and tissue products,Chemical and physical test methods for the dairy industry,Porcelain, glass-ceramic and glass tableware that come into contact with food,Bulk Food and Dairy Products,Cigarettes and Products,Pesticide products. Copper acetate. Acetic acid and copper content,food and food products,Leather and Leather Goods,Metal materials and articles for food contact,Food contact paper and paperboard materials and products,Tea and Tea Products,Plastic and Rubber Products,meat and meat products,Wire and wire products for fencing