Denaturing conditions Non-denaturing conditions

Denaturing conditions Non-denaturing conditions, Total:281 items.

The international standard classification for "Denaturing conditions Non-denaturing conditions" includes: Measurement of electrical and magnetic quantities , Power stations in general , Transformers. Reactors , Mechanical testing , Agricultural machines, implements and equipment , Agricultural tractors and trailed vehicles , Motion picture equipment , Dividing and tool-workpiece holding devices , Other equipment related to power transmission and distribution networks , Earth-moving machinery , Winding machines and equipment , Road transport , Motors , Aluminium and aluminium alloys , Fluid power systems , Electrical equipment of ships and of marine structures , Power transmission and distribution networks , Other rubber and plastics products , Optics and optical measurements , Welding equipment , Reinforced plastics , Internal combustion engines , Electric traction equipment , Transmissions, suspensions , Aerospace electric equipment and systems , Implants for surgery, prosthetics and orthotics .

The Chinese standard classification for "Denaturing conditions Non-denaturing conditions" includes: Electronic components , Electrical instrument and meter in general , Others , Transformer , Metal material testing machine , Transmission system , Welding and cutting equipment , Tractor , Lens , Machine tool assistive device and accessory , Architectural engineering construction machinery , Relay protection and automatic device , Spinning machinery and apparatus , Solid fuel ore in general , Highway transportation in general , Highway vehicle utilization, maintenance and service , Micro machine , Forging and pressing , Coupling, brake and speed variator , Power generation, transformation and distribution equipment for vessel , Other rubber products , Optical Measurement , Fibre reinforced composites , Electric drive control equipment , Internal combustion engine and auxiliary equipment , Traction substation , Signal equipment , Technical management , Technical management , Orthopedic devices .

Professional Standard - Aviation

HBm 84-1989 Specifications for motorcycle engine transmission
HB 6110-1986 General Technical Specifications for Sine-cosine Resolvers
HB 6109-1986 General Technical Specifications for Linear Resolvers
HB 5962-1986 General specifications for aircraft static converters
HB 5839-1983 General technical conditions for variable hydraulic pumps

Professional Standard - Energy and Power Planning

DL/T 1401-2015 Steel Pipe Manufacturing Technical Requirements for Steel Structures of Substation and Transmission Line
DL/T 1305-2013 General Technical Specification for Transformer Oils Dissipation Factor Tester
DL/T 527-2002 Technical condition for power supply at static state protection equipment
DL/T 272-2022 Technical specification of 220kV～750kV oil immersed power transformer
DL/T 1628-2016 Specification for excitation transformers of hydro turbine generator
DL/T 2283-2021 General technical requirements for mobile substation
DL/T 1267-2013 Technical Conditions of Use By Pad-mounted Transformer
DL/T 1442-2015 Technical Conditions for Intelligent Distribution Transformer Terminal
DL/T 1610-2016 General technical specification for the robot inspection system in substation
DL/T 339-2010 Specification for low voltage speed control device with variable frequency
DL/T 963-2005 General technical specifications of the transformation ratio tester
DL/T 1951-2018 General technical specification for winding deformation tester of power transformers
DL/T 1819-2018 Specification of static frequency converter for pumped storage power plant
DL/T 646-2006 Manufacturing technical requirements for transmission and substation and steel tubular structures
DL/T 646-2012 Manufacturing Technical Requirements for Steel Tubular Structures of Substation and Transmission Line
DL/T 527-1993 Technical condition for power supply at static state protection equipment
DL/T 770-2012 General specifications for transformer protection equipment
DL/T 537-1993 Specification of 6~35kV Cubical Substation for Order
DL/T 646-2021 Manufacturing technical requirements for steel tubular structures of transmission line and substation
DL/T 272-2012 Technical specification of 220 kV-750 kV oil immersed power transformer
DL/T 770-2001 General specifications for microprocessor-based transformer protection equipment
DL/T 857-2004 Specification of rectification inversion equipment for battery of power plant and substation
DL/T 1350-2014 General Specification for Fault Separation Equipment of Substation
DL/T 1617-2016 Technical Specification of Corrosive Sulphur Process Equipment of Transformer Oil

Professional Standard - Machinery

JB/T 8845-2000 Wheel loaders — Transmission control valves — Technical specifications
JB/T 5378-1991 16mm film projection anamorphic attachment lens technical conditions
JB/T 5378-2017 Anamorphic attachment for 16 mm motion-picture projection lenses. Technical specifications
JB/T 7143.1-1993 Specifications for inverters for wind turbines
JB/T 7064-1993 General Specifications for Semiconductor Inverters
JB/T 13701-2019 Sintered rotor、 guide sealing ring automotive variable pump-Specifications
JB/T 5378-2007 Technical specification of anamorphic attachment for 16mm film projection lens
JB/T 8657-2008 Specifications for transportation derived from walking tractors
JB/T 9373-1999 Specifications for the tensile-creep testing machines
JB/T 5782-1991 Simplex Winding Linear Rotating Transformer. General Technical Specifications
JB/T 6261-1992 Specification for Resistance Strain Gauge
JB/T 9940.2-1999 Self-locking Taper Reducing Sleeve of Toolholder - Technical Specification
JB/T 5340-1991 Special technical requirement for solder resistant transformers for multiple spot welding machines
JB/T 10635-2006 General specification for current & voltage transducer with small power
JB 5179-1991 Tractor transmission fork technical conditions
JB 5782-1991 General technical conditions for single winding linear resolver
JB/T 9712-2014 Torque Converters - Casting Technical Specifications for Blade Wheels
JB/T 9712-2001 Casting technical specifications for hydrdynamic torquc converterblade wheels
JB/T 13701-2019 Sintered rotor、 guide sealing ring automotive variable pump-Specifications
JB/T 8548-1997 Power Gearshift Transmission for Engineering Machinery - Technical Conditions
JB/T 7824-1995 Technical specification for inverter arc welding rectifiers
JB/T 9408-2010 Technical specification of anamorphic attachment for 35mm film projection
JB/T 7708-1995 Specifications for protective lubricants for thermal deformation of metals
JB/T 8318-1996 Specifications for insulating moldings for transformers
JB/T 4276-1999 Technical specifications for converter packing
JB/T 8318-2007 Technical specifications of insulation-shaping components for transformer
JB/T 5179-2000 Tractor shifting fork requirements
JB/T 9373-2014 Tensile-creep Testing Machines - Specification
JB/T 8657-1997 General technical requirements for walk-behind transport aircraft
JB/T 13277-2017 Composite precision forgings of automobile transmission shift gear. Technical specifications
JB/T 9529-1999 General specifications for transformers of resistance welding machines

Professional Standard - Hydroelectric Power

SD 320-1989 Technical specifications for box-type substations

Professional Standard - Education

JY 15-1985 Small transformer technical conditions

Professional Standard - Textile

FZ/T 93056-1999 Specification of tubes for textured yarns

Professional Standard - Coal

MT 225-1990 Under the condition of uniaxial compression of coal and rock creep measuring method
MT/T 225-1990 Method for determination of creep properties of coal and rock under unidirectional compression conditions

Professional Standard - Energy

DL/T 2828-2024 Technical requirements for converter transformer sound insulation enclosure
NB/T 11460-2023 Technical requirements for transient electromagnetic advance detectors for mines
NB/T 10189-2019 Power transmission and transformation equipment. Atmospheric environmental conditions. Monitoring methods
NB/T 10279-2019 Warm-damp environmental conditions for power transmission and transformation equipments
DL/T 1442-2024 Smart Transformer Terminal Technical Conditions

Professional Standard - Traffic

JT/T 108-1991 Technical requirements for automobile transmission being overhauled
JT/T 431-2000 Specification for light-emitting diode changeable message signs of expressway
JT/T 720-2008 Currency technical request for the maintenance and repair of motor automatic transmission
JT 432-2000 Specification for light-emitting diode changeable speed limit signs of expressway

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10241-2020 General specification for electrical resolver
GB/T 43117-2023 Glass-reinforced thermosetting plastics(GRP)pipes—Determination of the ring creep properties under wet or dry conditions
GB/T 14548-1993 specification for marine semiconductor conver - Tors
GB/T 12669-1990 General specification for cascade speed control assembly with semiconductor converter
GB/T 25301-2021 Resistance welding equipment - Transformers - General specifications applicable to all transformers
GB/T 22452-2008 General technical condition of non-linear optical borate crystal devices
GB/T 31996-2015 General specification for variable reluctance multipolar resolvers?
GB/T 10856-2006 Double turbine torque converter―Specification
GB/T 11875-1989 General specifications of marine rate-of-turn indicators
GB/T 12669-2012 General specification for cascade speed control assembly with semiconductor converter
GB/T 24651-2009 Specifications—Tractor shifting forks
GB/T 10856-1989 General specifications of double turbine torque converter
GB/T 10241-2007 Resolver electrical General specification for
GB/T 36283-2018 General technical specifications for secondary cabin of smart substation
GB/T 26549-2011 Turbocharger variable nozzle ring - General specifications
GB/T 34359-2017 Deformed aluminum alloy precision forgings - General specifications
GB/T 42267-2022 Flexible cellular polymeric materials—Determination of compression set under humid conditions
GB/T 14548-2025 General specification for marine semiconductor convertors
GB/T 34859-2017 General specification for brushless resolver
GB/T 32901-2016 General specifications for relay protection of intelligent substation
GB/T 10241-1988 Resolver, electrical ,General specification for

Group Standards of the People's Republic of China

T/CEEIA 492-2021 Specifications for static variable frequency power supply system for tests of electrical machines
T/CSEE 0215-2021 General technical specifications for electrical quantity transmission devices in power plants
T/CSEE 0094-2019 Technical conditions of complete set of equipment for generator neutral point grounding through transformer
T/CSEE 0121-2019 General technical specification for neutral point DC current isolation device of capacitive transformer
T/GHDQ 26-2018 Technical conditions for electric vehicle DC/DC converter in frigid regions
T/CEEIA 240-2016 Specifications for electrical steel strips for large transformers
T/SXJD 13-2020 Technical specification for 110kV prefabricated substation
T/CSEE 0177-2021 Technical requirements of built-in sound insulation board for oil immersed transformer
T/CECS 10190-2022 Technical conditions of low creep concrete for bridges
T/JMBX 0233-2022 Technical requirements for DC/DC converters for electric bicycles
T/HEBQIA 371-2025 Technical requirements for motor-driven transmissions
T/CEC 111-2016 Technical conditions for complete sets of integrated equipment for transformers on poles
T/CEC 225-2019 Technical conditions for DC/DC converter of DC distribution grid
T/QGCML 1208-2023 Manufacturing technical conditions for power transmission and distribution transformer accessories

Professional Standard - Railway

TB/T 2281-1991 Techinical Conditions for the Differential Protection of Rectifier Transformer of Traction Substation
TB 1524-1984 Variable truss support technical conditions
TB/T 1651-1996 Calculation Condition and Method for Transformer Capacity of Traction Substation
TB/T 3159-2007 Technical specification of traction transformer for AC electrified railways
TB/T 1869-1990 General specification for railway signal transformers
TB/T 3028-2002 Technical Specification for BE Series Choke Transformer
TB/T 2219-1991 Specifications for transistor inverters for fluorescent lamps
TB/T 2437-1993 Specifications for locomotive semi-conductor converters
TB 1523-1984 Adjustable Angle Adjustable Steel Formwork Specifications

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 2879-2008 General engineering factor for zhe non fermentable Bean poroducts
DB65/T 3568-2014 Distributed photovoltaic inverter technical conditions

Professional Standard - Automobile

QC/T 1009-2015 Specifications of passenger car automatic transmission filters
QC/T 463-1999 Motor vehicles. Hydrodynamic torque converter. The specifications
QC/T 29063-1992 Specifications for auto manual transmission assembly

Hubei Provincial Standard of the People's Republic of China

DB42/T 862-2012 Grid-connected photovoltaic inverter technical conditions

Professional Standard - Aerospace

QJ 987-1986 电源
QJ 765-1982 Technical Specifications for Low Frequency Transformer and Choking Coil
QJ 2158-1991 General technical conditions for strain gauge thrust sensors

Professional Standard - Electron

SJ 2329-1983 Generic specification for temperature change test chambers
SJ 2665-1986 Generic specification for variable plastic film dielectric tuning capacitors
SJ 2605-1985 General specification for constant voltage transformers for use in electronic equipment

Liaoning Provincial Standard of the People's Republic of China

DB21/T 3144-2019 Test procedure for autogenous volume deformation of hydraulic concrete under variable temperature conditions

Anhui Provincial Standard of the People's Republic of China

DB34/ 322-2003 Tractor variant transport aircraft safety technical requirements
DB34/T 2314-2015 Inspection Conditions and Evaluation of Thermal Deformation of CNC Machining Center

Hebei Provincial Standard of the People's Republic of China

DB13/T 1475-2011 Technical specifications for electronically controlled hydraulic automatic transmission assembly

Professional Standard - Medicine

YY/T 1736-2020 Standard test method for evaluating tibial insert endurance and deformation under high flexion

Professional Standard - Petroleum

SY/T 5716.9-1995 Technical Conditions for Overhaul of Oil Drilling Rig Hydraulic Torque Converter

Professional Standard - Public Safety Standards

GA/T 1697-2019 Forensic science writing condition change handwriting inspection protocol

American Society for Testing and Materials (ASTM)

ASTM E1145-87(1992)e1 Standard Specification for Denatured Ethyl Alcohol, Formula 3A
ASTM D1042-01a Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM D1042-01 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM D1042-93 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM C1681-14 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
ASTM C1681-18 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

Association of German Mechanical Engineers

VDI VDE 2635 Blatt 1-2015 Characteristics and testing conditions for metallic bonded resistance strain gauges
VDI VDE GESA 2635 Blatt 1-2007 Characteristics and test conditions for metallic bonded strain gauges - Part 1: Description of characteristics
VDI/VDE 2635 Blatt 1-1974 Bonded electric resistance strain gauges; characteristics and testing conditions
VDI VDE 2635 Blatt-1 E:2023-03 Experimental structure analysis – Metallic bonded resistance strain gauges – Characteristics and testing conditions
VDI/VDE/GESA 2635 Blatt 1-2007 Experimental structure analysis - Metallic bonded resistance strain gages - Characteristics and testing conditions
VDI/VDE/GESA 2635 Blatt 1-2005 Experimental structure analysis - Metallic bonded resistance strain gages - Characteristics and testing conditions
VDI/VDE 2635 Blatt 1-2014 Experimental structure analysis - Metallic bonded resistance strain gages - Characteristics and testing conditions
VDI/VDE 2635 BLATT 1-2015 Experimental structural analysis — strain gauges with metallic measuring grid — characteristics and test conditions

Gosstandart of Russia

GOST 24237-1984 Variable non-wire-wound resistors. General specifications
GOST 8733-1974 Seamless cold and warm deformed pipes. Specifications
GOST 30222-1995 Cone variable speed drives. General specifications
GOST 26546-1985 Chain variators. General specifications
GOST 24874-1991 Electrical insulating paper for transformers. Specifications
GOST 1131-1976 Strained aluminium alloys in pigs. Technical requirements
GOST 24376-1991 Semiconductor inverters. General specifications
GOST 24239-1984 Variable wire-wound resistors. General specifications
GOST 24607-1988 Semiconductor frequency converters. General technical requirements
GOST R ISO 2477-2011 Insulating refractory products. Determination of permanent change in dimensions on heating
GOST 17221-1991 Transformer hermetic centrifugal electric pumps. Types. Basic parameters and dimensions
GOST 32482-2025 Gold-rolled grain-oriented electrical steel sheet and strip for transformer. Specifications
GOST 16313-1997 Electric motor frequency convertors with rated power up to 200 kW and frequency to 20000 Hz. General specifications
GOST 15077-1978 Force-measuring strain gauge sensors GSP. General technical conditions
GOST 26957-1986 Variatore with wide angle beit pylleys. General specifications
GOST R 57783-2017 Fiberglass-reinforced thermosetting plastic pipes. Determination of creep factor under dry condition
GOST 26957-1997 Variators with wideangle belt pulleys. General specifications
GOST 22501-1985 Triacetate thread in bobbins. Specifications
GOST 8042-1993 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8. Special requirements for accessories
GOST R EN 986-2011 Textile floor coverings. Tiles. Determination of dimensional changes due the effects of varied water and heat conditions and distortion out of plane
GOST R 55453-2022 feeding stuffs for nonproductive animals. General specifications
GOST 8042-1978 Measuring converters. Instrument shunts. Specifications
GOST 19294-1984 General-purpose low-power transformers. General specifications
GOST 24240-1984 Fixed and variable vacuum capacitors. General specifications

Japanese Industrial Standards Committee (JISC)

JIS K 6254:2003 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties at low deformation
JIS Z 8719:1996 ERRATUM 1:2000 Metamerism index -- Evaluation method of degree of metamerism for change in illuminant (Erratum 1)

German Institute for Standardization

DIN 17245:1967 Quality specifications for cast iron creep resistant at elevated temperatures;
DIN 5483-1:1983-06 Time-dependent quantities; terms for the time-dependency
DIN 740-1:1986-08 Power transmission engineering; flexible shaft couplings; technical delivery conditions
DIN 6172 E:2013-11 Special metamerism-index for pairs of samples at change in illuminant
DIN 6172:1993 Special metamerism-index for pairs of samples at change in illuminant
DIN 6172:2014 Special metamerism-index for pairs of samples at change in illuminant
DIN EN 10164:2005 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions; German version EN 10164:2004
DIN EN 10164 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
DIN EN 10164 E:2016-04 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
DIN EN 761:1994 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions; German version EN 761:1994
DIN 7863:1983-04 Non cellular elastomer glazing and panel gaskets; technical delivery conditions
DIN TS 35220 E:2021-04 Adaptation to the impacts of climate change Prerequisites and implementation
DIN 7863:1983 Non cellular elastomer glazing and panel gaskets; technical delivery conditions
DIN 7863-1 E:2011-02 Draft Document - Elastomor glazing and panael gaskets for windows and claddings - Technical delivery conditions - Part 1: Non celluar elastomer glazing and panel gaskets

Association Francaise de Normalisation

NF P20-513*NF EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
NF P20-513:1985 METHODS OF TESTING DOORS. BEHAVIOUR UNDER HUMIDITY VARIATIONS OF DOOR LEAVES PLACED IN SUCCESSIVE UNIFOR CLIMATES. (EUROPEAN STANDARD EN 43).
NF A36-202:2005 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions.
NF A36-202:1993 Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions.
NF B41-210-4*NF EN 820-4:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4 : determination of flexural creep deformation at elevated temperatures
NF EN ISO 10468:2023 Glass-reinforced thermosetting plastic (GRP) tubes - Determination of annular creep properties under wet or dry conditions
NF T57-212*NF EN 761:1994 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor dry conditions.
NF G35-048:1995 Textile floor coverings. Tiles. Determination of dimensional changes due to the effects of varied water and heat conditions and distorsion out of plane.

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4380-2000 Air Filter Performance under Variable Air Volume Conditions (RP-675)

Korean Agency for Technology and Standards (KATS)

KS C IEC 60044-6-2003(2018) Instrument transformers - Part 6: Requirements for transient performance of protective current transformers
KS A IEC 61709:2006 Electronic components－Reliability－Reference conditions for failure rates and stress models for conversion
KS M ISO 10468-2019(2024) Glass-reinforced thermosetting plastics(GRP) pipes — Determination of the ring creep properties under wet or dry conditions
KS M ISO 7616-2020 Cellular plastics, rigid－Determination of compressive creep under specified load and temperature conditions
KS B 4213-1986 Test conditions for milling machines with table of variable height － Testing of accuracy － Part 3: Machines with vertical spindle
KS B 4213-2006 Test conditions for milling machines with table of variable height － Testing of accuracy － Part 3: Machines with vertical spindle
KS B 6952-2007 Hot rolled products of non alloy structural steels-Technical delivery conditions

Polski Komitet Normalizacyjny (PKN)

PN C89211-1989 Thermoplastic pipes Determination change of length of pipes as result of heating
PN D04251-1988 Plywood Determination of linear diamensions changes after conditioning humid air

International Electrotechnical Commission (IEC)

IEC 60695-2-4-1:1991/AMD1:1994 General technical requirements for smart substations
IEC TR 60919-1:2010+AMD1:2013 CSV Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions
IEC TR 60919-3:2009+AMD1:2016 CSV Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 3: Dynamic conditions
IEC TR 60919-1:2005 Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions

British Standards Institution (BSI)

BS 2782-7 METHOD 732A:1991 Methods of testing plastics. Rheological properties-Determination of viscosity number:general conditions
BS EN ISO 10468:2023 Glass - reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
BS ISO 10468:2018 Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the ring creep properties under wet or dry conditions
BS EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
BS ISO 815-2:2009 Rubber, vulcanized or thermoplastic. Determination of compression set. At low temperatures
BS ISO 815-2:2014 Rubber, vulcanized or thermoplastic. Determination of compression set. At low temperatures
BS ISO 10791-10:2022 Test conditions for machining centres. Evaluation of thermal distortions
BS ISO 815-2:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - At low temperatures
BS EN 820-4:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4:Determination of flexural creep deformation at elevated temperatures
DD ENV 820-4-2002 Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of flexural creep deformation at elevated temperatures
22/30447027 DC BS ISO 10468. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the ring creep properties under wet or dry conditions

Ente Nazionale Italiano di Unificazione

UNI 7969-1979 Mechanical testing of metal materials. Determination of toughness under plane deformation conditions
UNI EN ISO 9047:1999 Building construction - Sealants - Determination of adhesion/cohesion properties at variable temperatures
UNI EN 10164:2018 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
UNI 6063:1986 Plastics. Determination of change of properties upon exposure under glass to daylight.
UNI EN 10164:2005 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
UNI 7969:1979 Mechanical testing of metallic materials. Determination of plane- strain fracture toughness.
UNI EN 1108:2006 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes
UNI EN ISO 10468:2023 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions
UNI EN ISO 13938-2:2001 Textiles - Bursting properties of fabrics - Pneumatic method for determination of bursting strength and bursting distension

Yugoslav Association for Standardization

JUS N.R8.151-1982 Cores for inductors and transformers for telecommunications. Apparartus for magnetic conditioning
JUS G.S2.819-1990 Cellular plastics, rigid. Determination of compressive creep under specified load and temperature conditions
JUS C.K6.033-1982 Prestressing steels. Testing of geometrical properties vvires ban and strands

National Standardisation Body (ASRO)

STAS 8294-1969 Transformer automation methods. General conditions
STAS 12043/2-1981 RUBBER O RINGS Determination of permanent compression strain under constant strain
STAS 10942-1984 TRANSFORMERS FOR RESISTANCE WELDING MACHINES General technical requirements
STAS SR EN 10164-1995 Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions

GCC Standardization Organization

BH GSO ISO 6444:2024 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
GSO ISO 10468:2021 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
GSO ISO 5826:2015 Resistance welding equipment -- Transformers -- General specifications applicable to all transformers
GSO IEC TR 60919-1:2014 Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions

Swedish Institute for Standards

SS-EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
SS-EN 10164:2005 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
SS-ISO 13362:2003 Flexible cellular polymeric materials - Determination of compression set under humid conditions
SIS SS-ISO 1701:1992 Test conditions for milling machines with table of variable height, with horizontal or vertical splndle — Testing of accuracy
SIS SS 3278-1978 Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy
SS-EN 10164:2018 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions

Austrian Standards

ONORM EN 10164-1993 Steel products with improved deformation properties perpendicular lo the surface of the product - Technical dehvery conditions
ONORM EN 43-1986 Methods of testing doors; behavlour under humidity variations of door leaves placed in successive uniform climates

International Organization for Standardization (ISO)

ISO 10468:2023 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
ISO/PRF 10468:2023 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
ISO 13362 Flexible cellular polymeric materials - Determination of compression set under humid conditions
ISO 10468:2003/Amd 1:2010 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor — Amendment 1
ISO/DIS 10468 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
ISO 10952:2008 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack for the inside of a section in a deflected condition

Society of Automotive Engineers (SAE)

SAE AS19692 Pumps Hydraulic Variable Flow General Specifications

Netherlands Institute for Standardization

NEN-EN 10164-1993 Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions

Belgian Standards Institute

NBN-EN 10164-1993 Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions

European Committee for Standardization (CEN)

EN 10164:1993 Steel Products with Improved Deformation Properties Perpendicular to the Surface of the Product - Technical Delivery Conditions
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN 79:1985 Methods of testing doors; behaviour of door leaves placed between two different climates
EN 79:1977 Methods of Testing Doors Behaviour of Door Leaves Placed Between Two Different Climates Superseded by EN 1121:2000
prEN 10164-1992 Steel products with improved deformation properties perpendicular to the surface of the product; technical delivery conditions
EN 43:1985 Methods of Testing Doors: Behaviour Under Humidity Variations of Door Leaves Placed in Successive Uniform Climates
EN 761:1994 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions

GM Holden Ltd

HOLDEN HN 0217-2013 Determination of Tension Set Under Constant Elongation

American Water Works Association (AWWA)

AWWA CSC92031 Explicit Calculation of Pipe Network Parameters for Time Varying Conditions

Argentine Institute of Standardization

IRAM 2099-1953 Transformers for current conduction and shunting and standard transformers (general conditions)

Danish Standards Foundation

DANSK DS/ISO 10468:2018 Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the ring creep properties under wet or dry conditions
DS/EN 10164:2011 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions

Spanish Association for Standardization (UNE)

UNE-EN 10164:2007 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions

Lithuanian Standards Office

LST EN 10164-2005 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions

Czech Standards Institute (UNMZ)

CSN ON 35 1360-1966 Instrument transformers are used in areas with severe climatic conditions

National Aeronautics and Space Administration (NASA)

NASA NACA-RM-L51A19-1951 The torsional deflections of several propellers under operating conditions

American Gear Manufacturers Association

AGMA 2000FTM10 Bending Fatigue Investigation under Variable Load Conditions on Case Carburized Gears

Standards Norway

NS-EN ISO 10468:2023 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
NS-EN 10164:1993 Steel products with improved deformation properties perpendicular to the surface of the product — Technical delivery conditions
NS-EN 10164:2018 Steel products with improved deformation properties perpendicular to the surface of the product — Technical delivery conditions

Others: Native conditions,Denaturing conditions Non-denaturing conditions