calorific value of plastic

calorific value of plastic, Total:491 items.

The international standard classification for "calorific value of plastic" includes: Thermoplastic materials , Thermosetting materials , Plastics in general , Plastics pipes, fittings and valves , Exploratory and extraction equipment .

The Chinese standard classification for "calorific value of plastic" includes: Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic , Plastic profile , Petroleum drilling & production equipment and instrument , Hot processing technology , Basic standards and general methods .

Professional Standard - Commodity Inspection

SN/T 4112-2015 Determination of the heat of combustion of polypropylene plastics - Bomb calorimeter method
SN/T 4375-2015 Determination of the peroxide value of the plastic resin
SN/T 3101-2012 Estimation of net and gross heat of combustion of burner and diesel fuels

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17037.3-2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
GB/T 384-1981 Determination of calorific value of petroleum products
GB/T 44317-2024 Thermoplastics lined tubing
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4:Determination of moulding shrinkage
GB/T 28494-2012 Globe valves of thermoplastics materials
GB/T 9352-2008 Plastic - Compression moulding of test specimens of thermoplastic materials
GB/T 2895-2008 Plastics polyester resin - Determination of partial acid value and total acid value
GB/T 9647-2015 Thermoplastics pipes―Determination of ring stiffness
GB/T 5471-2008 Plastics - Compression moulding of test specimens of thermosetting materials
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
GB/T 44578-2024 Diaphragm valves of thermoplastics materials
GB/T 32364-2015 Plastics—Phenolic resins—Determination of pH
GB/T 27725-2011 Butterfly valves of thermoplastics materials

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39822-2021 Plastics—Determination of yellowness index and change in yellowness index
GB/T 38008-2019 Gate valves of thermoplastics materials
GB/T 39818-2021 Plastics—Thermosetting moulding materials—Determination of shrinkage
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
GB/T 37842-2019 Ball valves of thermoplastics materials
GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars

Guangdong Provincial Standard of the People's Republic of China

DB44/T 927-2011 Thermoplastic Tableware

Professional Standard - Aviation

HB/Z 349-2001 Heat resistance thermoplastic injection molding process

Professional Standard - Railway

TB/T 2981-2000 Determination of Maximum Heat Value for Material Combustion

国家质量监督检验检疫总局

SN/T 4942-2017 Determination of the heat of combustion of Biofuel-homb calorimeter method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material

Association of German Mechanical Engineers

DVS 2205-1-1974 Calculation of containers and apparatuses of thermoplastics; characteristic values
DVS 2205-1-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values
DVS 2205-1-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values
DVS 2205-1-2015 Calculated property values for containers and equipment made of thermoplastics
DVS 2205-1-2014 Calculated property values for containers and equipment made of thermoplastics
DVS 2205-1 Beiblatt 2-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polypropylene material group
DVS 2205-1 Beiblatt 2-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polypropylene material group
DVS 2205-1-1987 Design calculations for containers and apparatus made from thermoplastics - Characteristic values
DVS 2205-1-2002 Design calculations for containers and apparatus made from thermoplastics - Characteristic Values
DVS 2205-1 Beiblatt 3-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyvinyl chloride material group
DVS 2205-1 Beiblatt 1-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyethylene material group
DVS 2205-1 Beiblatt 6-2008 Calculation of containers and equipment made of thermoplastics Characteristic values of the material group polyethylene
DVS 2205-1 Beiblatt 3-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyvinyl chloride material group
DVS 2205-1 Beiblatt 4-2012 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the fluoropolymer material group
DVS 2205-1 Beiblatt 4-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the fluoropolymer material group
DVS 2205-1 Beiblatt 4-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the fluoropolymer material group
DVS 2204-1-2010 Bonding of thermoplastics
DVS 2204-1-2011 Adhesive bonding of thermoplastics
DVS 2204-3-1981 Glueing of thermoplastics; polystyrene and allied plastics
DVS 2243-2003 Laser beam welding of thermoplastics
DVS 2243-2013 Laser beam welding of thermoplastics
DVS 2243-2005 Laser beam welding of thermoplastics
DVS 2204-4-1981 Glueing of thermoplastics; polyamides
DVS 2243-2014 Laser beam welding of thermoplastics
DVS 2215-1-1999 Hot plate welding of mouldings made from thermoplastics in volume production

International Organization for Standardization (ISO)

ISO 8328:1989 Plastics; amorphous thermoplastic moulding materials; determination of maximum reversion
ISO 294:1975 Plastics; Injection moulding test specimens of thermoplastic materials
ISO 13229:2010 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value
ISO 294:1995 Plastics - Injection moulding of test specimens of thermoplastic materials
ISO 1628-4:1986 Plastics; Determination of viscosity number and limiting viscosity number; Part 4 : Polycarbonate (PC) moulding and extrusion materials
ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
ISO 8975:1989 Plastics; phenolic resins; determination of pH
ISO 307:1984 Plastics; Polyamides; Determination of viscosity number
ISO 307:2003 Plastics - Polyamides - Determination of viscosity number
ISO 307:2007 Plastics - Polyamides - Determination of viscosity number
ISO 307:1994 Plastics - Polyamides - Determination of viscosity number
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
ISO 306:1987 Plastics; Thermoplastic materials; Determination of Vicat softening temperature
ISO 306:1974 Plastics — Determination of the Vicat softening temperature of thermoplastics
ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
ISO 295:1991 Plastics; compression moulding of test specimens of thermosetting materials
ISO 18125:2017 Solid biofuels - Determination of calorific value
ISO 2577:1984 Plastics; Thermosetting moulding materials; Determination of shrinkage
ISO 295:1974 Plastics; Compression moulding test specimens of thermosetting materials
ISO 21654:2021 Solid recovered fuels - Determination of calorific value
ISO 8233:2024 Thermoplastics valves
ISO 2114:1996 Plastics - Unsaturated polyester resins - Determination of partial acid value and total acid value
ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
ISO 294-4:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
ISO 2577:2007 Plastics - Thermosetting moulding materials - Determination of shrinkage
ISO 23559:2011 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 2114:1974 Plastics; Unsaturated polyester resins; Determination of acid value
ISO 16790:2021 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
ISO 1928:1976 Solid mineral fuels — Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value
ISO 294-3:2002 Plastics - Injection moulding of test specimens of thermoplastics materials - Part 3: Small plates
ISO 7808:1992 Plastics; thermosetting moulding materials; determination of transfer flow
ISO 306:1994 Plastics - Thermoplastic materials - Determination of Vicat Softening Temperature (VST)
ISO 9967:1994 Thermoplastics pipes; determination of creep ratio
ISO 13967:1998 Thermoplastics fittings - Determination of ring stiffness
ISO 2554:1974 Plastics; Unsaturated polyester resins; Determination of hydroxyl value
ISO 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value

SCC

NS-EN 1778:1999 Characteristic values for welded thermoplastics constructions — Determination of allowable stresses and moduli for design of thermoplastics equipment
DANSK DS/EN 1778:1999 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
BS 526:1961 Definitions of the calorific value of fuels
09/30198190 DC BS ISO 13229. Thermoplastics piping systems for non-pressure applications. Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings. Determination of the viscosity number and K-value
DANSK DS/EN ISO 307/A1:2007 Plastics – Polyamides – Determination of viscosity number
DANSK DS/EN ISO 8975:1995 Plastics - Phenolic resins - Determination of pH
BS EN ISO 307:1998 Plastics. Polyamides. Determination of viscosity number
DANSK DS/CEN/TS 16892:2016 Plastics - Welding of thermoplastics - Specification of welding procedures
SN-CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
BS EN ISO 3994:2001 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
AENOR UNE 53026:1955 PLASTIC MATERIALS. DETERMINATION OF HEAT DEFORMATION OF MOLDED PLASTIC MATERIALS
AENOR UNE 53031:1974 Plastic materials. Determination of the surface electrical resistance of thermostable plastic materials.
AENOR UNE 53089:2001 Plastics. Determination of the permanent effect of heat on plastics.
DANSK DS/ISO 293:2023 Plastics – Compression moulding of test specimens of thermoplastic materials
BS 2782-1 METHODS 120A TO 120E:1976 Methods of testing plastics. Thermal properties-Determination of the Vicat softening temperature of thermoplastics
NS-EN 15400:2011 Solid recovered fuels — Determination of calorific value
BS 4379:1969 Method for determination of calorific value of liqued fuel
DANSK DS/ISO 21654:2021 Solid recovered fuels – Determination of calorific value
AENOR UNE 53027:1955 PLASTIC MATERIALS. DETERMINATION OF HEAT RESISTANCE
DIN 35230 E:2016 Draft Document - Plastics - Welding of thermoplastics - Specification of welding procedures
DANSK DS/EN 15400:2011 Solid recovered fuels – Determination of calorific value
DANSK DS/EN 14918:2010 Solid biofuels – Determination of calorific value
AENOR UNE-EN 14918:2011 Solid biofuels. Determination of calorific value.
NS-EN 12107:1997 Plastics piping systems — Injection-moulded thermoplastics fittings, valves and ancillary equipment — Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
NS-EN 14918:2009 Solid biofuels — Determination of calorific value
HOLDEN HN 2447-2013 ThermoplElastomer - Engineering Thermoplastic ETP Bondable Thermoplastic Vulcanizate TPV
BS 2782-11 METHOD 1104A:1983 Methods of testing plastics. Thermoplastics pipes, fittings and valves-Measurement of opacity of thermoplastics pipes and fittings
DANSK DS/ISO 307:2019 Plastics – Polyamides – Determination of viscosity number (ISO 307:2019)
AENOR UNE-EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number (ISO 307:2007)
AENOR UNE-EN ISO 307/A1:2007 Plastics - Polyamides - Determination of viscosity number (ISO 307:2007)
DANSK DS/EN ISO 2554:1998 Plastics - Unsaturated polyester resins - Determination of hydroxyl value
NS-EN ISO 307:1997 Plastics — Polyamides — Determination of viscosity number (ISO 307:1994)
DANSK DS/EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
NS-EN ISO 307:2003 Plastics — Polyamides — Determination of viscosity number (ISO 307:2003)
DANSK DS/ISO 1928:2009 Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
NS-EN ISO 8975:1995 Plastics — Phenolic resins — Determination of pH (ISO 8975:1989)
DIN 51900:2023 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value
BS 2782-1 METHOD 120C:1990 Methods of testing plastics. Thermal properties-Determination of the 1/10 Vicat softening temperature of thermoplastics
DANSK DS/EN ISO 293:2005 Plastics – Compression moulding of test specimens of thermoplastic materials
AENOR UNE-EN ISO 8975:1996 PLASTICS. PHENOLIC RESINS. DETERMINATION OF PH (ISO 8975:1989).
NS-EN ISO 307:2007 Plastics — Polyamides — Determination of viscosity number (ISO 307:2007)
DANSK DS/EN ISO 307:2019 Plastics – Polyamides – Determination of viscosity number (ISO 307:2019)
BS EN ISO 293:2003 Plastics. Compression moulding test specimens of thermoplastic materials
05/30130718 DC EN ISO 307. Plastics. Polyamides. Determination of viscosity number
NS-EN ISO 307:2019 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019)
DANSK DS/EN ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value
BS 5955-8:1990 Plastics pipework (thermoplastics materials)-Specification for the installation of thermoplastics pipes and associated fittings for use in domestic hot and cold water services and heating systems
DANSK DS/EN ISO 580:2005 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
BS ISO 13229:2010 Thermoplastics piping systems for non-pressure applications. Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings. Determination of the viscosity number and K-value
DANSK DS/EN ISO 7808:1998 Plastics - Thermosetting moulding materials - Determination of transfer flow
BS EN ISO 293:2005 Plastics. Compression moulding of test specimens of thermoplastic materials
DANSK DS/EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness
BS EN ISO 9969:2007 Thermoplastics pipes. Determination of ring stiffness
BS EN ISO 9967:2007 Thermoplastics pipes. Determination of creep ratio
BS 6728-1:1986 Thermoplastics hot water bottles-Specification for hot water bottles manufactured from PVC compounds
05/30129842 DC BS EN 15170. Characterization of sludges. Calorific value (determination of gross and net calorific values)
BS 5955-7:1983 Plastics pipework (thermoplastics materials)-Recommendations for methods of thermal fusion jointing
BS 526:1933 Definitions of cross and net calorific value
DANSK DS/EN ISO 306:2013 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
BS EN ISO 306:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 306:2004 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
NS-EN ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
DANSK DS/EN ISO 2114/AC:2005 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value

Spanish Association for Standardization (UNE)

UNE-EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
UNE-EN ISO 13229:2012 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
UNE-EN ISO 307:2020 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019)
UNE 53089:2001 PLASTICS. DETERMINATION OF PERMANENT EFFECT OF HEAT ON PLASTICS.
UNE-EN ISO 18125:2018 Solid biofuels - Determination of calorific value (ISO 18125:2017)
UNE-EN 14918:2011 Solid biofuels - Determination of calorific value
UNE 53031:1974 PLASTICS MATERIALS. DETERMINATION OF SUPERFICIAL RESISTANCE OF THERMOSETTING PLASTICS MATERIALS
UNE-EN ISO 3994:2001 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification. (ISO 3994:1998)
UNE-EN 15400:2011 Solid recovered fuels - Determination of calorific value
UNE 53 027 Determination of heat resistance of plastics
UNE-EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
UNE-EN ISO 8975:1996 PLASTICS. PHENOLIC RESINS. DETERMINATION OF PH (ISO 8975:1989).
UNE-EN ISO 307:2004 Plastics - Polyamides - Determination of viscosity number (ISO 307:2003)
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
UNE 53951:2004 Plastics. Raw materials test for polyurethane. Polyols. Determination of pH
UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
UNE-EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)

Lithuanian Standards Office

LST EN 1778-2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
LST EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
LST EN 14918-2010 Solid biofuels - Determination of calorific value
LST EN 15400-2011 Solid recovered fuels - Determination of calorific value
LST EN ISO 8975:2001 Plastics - Phenolic resins - Determination of pH (ISO 8975:1989)
LST EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2007)
LST EN 13655-2002 Plastics - Mulching thermoplastic films for use in agriculture and horticulture

Danish Standards Foundation

DS/EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
DS/EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value
DS/EN ISO 8975:1996 Plastics - Phenolic resins - Determination of pH
DS/ISO 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
DS/ISO 21654:2021 Solid recovered fuels – Determination of calorific value
DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
DS/EN 14918:2010 Solid biofuels - Determination of calorific value
DS/EN 15400:2011 Solid recovered fuels - Determination of calorific value
DS/EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials
DS/EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
DS/EN ISO 2554:1999 Plastics - Unsaturated polyester resins - Determination of hydroxyl value
DS/EN 13655:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture
DS/EN ISO 580:2005 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings – Methods for visually assessing the effects of heating

Society of Automotive Engineers (SAE)

SAE AMS3609E-2011 Methyl Methacrylate Plastic, Sheet Heat Resistant
SAE J1498-1998 Heating Value of Fuels
SAE J1498-2011 Heating Value of Fuels

BE-NBN

NBN T 42-003-1989 Thermoplastic pipes - General definitions, nominal values and tolerances
NBN T 40-101-1988 Plastics - Determination of the melt flow rate of thermoplastics
NBN T 52-095-1978 Aviation fuels - Estimation of net heat of combustion
NBN T 52-095-1985 Aviation fuels - Estimation of net heat of combustion

Association Francaise de Normalisation

NF T54-412*NF EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment
NF EN 1778:2000 Characteristic values of welded thermoplastic constructions - Determination of admissible stresses and moduli for the design of thermoplastic material
NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
NF T58-003*NF EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
NF T51-173:2007 Plastics - Polyamides - Determination of viscosity number.
NF EN 1704:1997 Plastic piping systems - Thermoplastic valves - Test method for verifying a valve after thermal cycles under bending
NF T52-113:1985 Plastics. Basic materials for polyurethanes. Polyesters. Determination of the hydroxyl value.
NF T52-112:1985 Plastics. Basics materiels for polyurethanes. Polyethers. Determination of the hydroxyl value.
NF T58-005*NF EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
NF T52-118:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determining of the conventionnal pH value.
NF T51-433*NF EN ISO 8975:1995 Plastics. Phenolic resins. Determination of ph.
NF X34-104*NF EN ISO 18125:2017 Solid biofuels - Determination of calorific value
NF EN ISO 18125:2017 Biocombustibles solides - Détermination du pouvoir calorifique
NF M07-030:1996 Combustibles liquides pétroliers - Détermination du pouvoir calorifique
NF X34-208:2011 Solid recovered fuels - Determination of calorific value.
NF EN ISO 8975:1995 Plastiques - Résines phénoliques - Détermination du pH.
NF X34-208*NF EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value
NF EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value
NF EN 13206+A1:2020 Plastics - Thermoplastic covering films for use in agriculture and horticulture
NF T58-003:1994 Plastics. Compression moulding test specimens of thermoplastic materials.
NF T54-082:1988 Plastics. Thermoplastic and thermosetting valves. Test of resistance to pressure.
NF EN ISO 2554:1998 Plastics - Unsaturated polyester resins - Determination of the hydroxyl number
NF T51-566:2006 Plastics - Determination of drawing characteristics of thermoplastics in the molten state.
NF T54-911*NF EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF T51-173:1998 Plastics. Polyamides. Determination of viscosity number.
NF T54-911:2008 Thermoplastics pipes - Determination of creep ratio.
NF T54-202:2002 Silage thermoplastic films.
NF T51-021*NF EN ISO 306:2014 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
NF T54-912:2008 Thermoplastics pipes - Determination of ring stiffness.
NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
NF M03-005:2011 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value.

GSO

GSO ISO 2578:2015 Plastics -- Determination of time-temperature limits after prolonged exposure to heat
OS GSO ISO 8975:2013 Plastics - Phenolic resins - Determination of pH
BH GSO ISO 3994:2016 Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials -- Specification
OS GSO ISO 2577:2015 Plastics -- Thermosetting moulding materials -- Determination of shrinkage
BH GSO ISO 2577:2017 Plastics -- Thermosetting moulding materials -- Determination of shrinkage
OS GSO ISO 16790:2013 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
GSO ISO 16790:2013 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
BH GSO ISO 1928:2016 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
GSO ISO 2114:2015 Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value
GSO ISO 1928:2013 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
OS GSO ISO 3994:2015 Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials -- Specification
BH GSO ISO 7808:2016 Plastics - Thermosetting moulding materials - Determination of transfer flow
BH GSO ISO 293:2015 Plastics – compression moulding of test specimens of thermoplastic materials
GSO ISO 2554:2015 Plastics -- Unsaturated polyester resins -- Determination of hydroxyl value
OS GSO ISO 2114:2015 Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value
OS GSO ISO 1928:2013 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
OS GSO ISO 580:2013 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
BH GSO ISO 16790:2016 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
OS GSO ISO 7808:2013 Plastics - Thermosetting moulding materials - Determination of transfer flow
BH GSO ISO 580:2016 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
GSO ISO 9967:2013 Thermoplastics pipes - Determination of creep ratio
GSO ISO 9969:2013 Thermoplastics pipes - Determination of ring stiffness
OS GSO ISO 9967:2013 Thermoplastics pipes - Determination of creep ratio
OS GSO ISO 306:2015 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)

German Institute for Standardization

DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
DIN EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
DIN EN ISO 307:2019-11 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019); German version EN ISO 307:2019
DIN ISO 8975:1992 Plastics; phenolic resins; determination of pH; identical with ISO 8975:1989
DIN 53498:1967 Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials
DIN 35230:2016-09 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
DIN EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 16135 Berichtigung 1:2008 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006, Corrigenda to DIN EN ISO 16135:2006-06
DIN EN ISO 307 E:2018-01 Determination of viscosity values of plastic polyamides (draft)
DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
DIN 51900:2022-06 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value / Note: Date of issue 2022-05-06*Intended as replacement for DIN 51900-1 (2000-04), DIN 51900-1 Berichtigung 1 (20...
DIN 51900:2023-12 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value
DIN EN ISO 2114:2002-06 Plastics (polyester resins) and paints varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); German version EN ISO 2114:2000
DIN EN 1778:1999-12 Characteristic values for welded thermoplastic constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment; German version EN 1778:1999
DIN EN ISO 3994:2015-11 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014); German version EN ISO 3994:2014
DIN EN ISO 16138 Berichtigung 1:2008 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006, Corrigenda to DIN EN ISO 16138:2006-06
DIN EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007); English version of DIN EN ISO 9967:2008-02
DIN 35230 E:2016-02 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
DIN EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number (ISO 307:2007); English version of DIN EN ISO 307:2007-08
DIN EN ISO 2554:1998-10 Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997); German version EN ISO 2554:1998
DIN EN 1778:1999 Characteristic values for welded thermoplastic constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment; German version EN 1778:1999
DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN ISO 9969:2016-06 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016); German version EN ISO 9969:2016
DIN EN ISO 2114 Berichtigung 1:2006-11 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); German version EN ISO 2114:2000, Corrigenda to DIN EN ISO 2114:2002-06; German version EN ISO 2114:2000/AC:2005
DIN EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002); German version EN ISO 294-3:2003
DIN EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007); English version of DIN EN ISO 9969:2008-03
DIN EN ISO 13967:2010-04 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009); German version EN ISO 13967:2009
DIN EN ISO 306 E:2012-01 Vicat Softening Temperature of Plastic Thermoplastics (Draft)
DIN EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003
DIN EN ISO 20028-1 E:2018-09 Plastic thermoplastic polyester (draft)
DIN EN ISO 2554:1998 Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997); German version EN ISO 2554:1998
DIN EN ISO 20028-1 E:2015-08 Plastic thermoplastic polyester (draft)
DIN EN ISO 7808:1998 Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998

South African Bureau of Standard

SANS 5852:1976 Plastic limit and plasticity index of fines in aggregates for base-courses
SANS 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value
SANS 1655:2004 Welding of thermoplastics - Welding rods, fillers and solvents
SANS 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorific method, and calculation of net calorific value

HU-MSZT

MSZ 7587-1965 Single numerical representation of plastic materials
MSZ 10071-1966 Tools for the production of thermoplastic objects
MSZ 7756-1961 Dimensional tolerances of thermoplastic injection molded parts
MSZ 7253-1968 Checking plastic by how much it shrinks after heating

SAE - SAE International

SAE J1498-1987 Heating Value of Fuels
SAE J1498-1988 Heating Value of Fuels
SAE J1498-1990 Heating Value of Fuels@ Information Report
SAE J1498-2017 Heating Value of Fuels
SAE J1498-2005 Heating Value of Fuels

PL-PKN

PN C96002-1986 Gas fuels Messuring of gross and net calorific values with an calorimeter
PN C89418-1990 Plastics Determination of volatile matter in thermoplastics
PN C89012-1988 Plastics Recommended practice for injection moulding test specirnens of thermoplastic materials
PN C89024-1993 Plastics. Thermoplastic materials. Determination of Vicat softening temperature

FI-SFS

SFS 4238 E-1979 In the event of any differences in interpretation of this standard the Finnish version shall take precedence over this translation.
SFS 4386-1979 plastic. Hard foam plastic. Determination of thermal conductors
SFS 3257-1976 MUOVIT. KESTOMUOVISET RUISKUPURISTETUT KOEKAPPALEET

Japanese Industrial Standards Committee (JISC)

JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
JIS K 6933:1999 Plastics -- Polyamides -- Determination of viscosity number
JIS K 6933:2013 Plastics.Polyamides.Determination of viscosity number
JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
JIS A 1480:2002 Thermal insulating materials and products for buildings -- Procedures for determining declared and design thermal values
JIS A 5709:1979 Thermoplastic bathtubs
JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
JIS K 7206:1999 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7206:2016 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
JIS K 6814:2008 Thermoplastics pipes -- Thermal reversion test method

Korean Agency for Technology and Standards (KATS)

KS M 3071-2004(2019) Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M 3071-2019 Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M ISO 8975-2020 Plastics－Phenolic resins－Determination of pH
KS M ISO 8975-2010(2020) Plastics－Phenolic resins－Determination of pH
KS M ISO 8975:2010 Plastics－Phenolic resins－Determination of pH
KS M ISO 2578:2007 Plastics－Determination of time－temperature limits after prolonged exposure to heat
KS M ISO 306:2015 Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 306:2012 Plastics-Thermoplastic materials-Determination of Vicat softening temperature(VST)
KS M ISO 295-2010(2020) Plastics－Compression moulding of test specimens of thermosetting materials
KS M ISO 295:2010 Plastics-Compression moulding of test specimens of thermosetting materials
KS C 2006-1998 Testing method for ball pressure of thermoplastics
KS M ISO 18125:2021 Solid biofuels — Determination of calorific value
KS C 2006-1998(2018) Ball Pressure Test Method for Thermoplastics
KS M ISO 9969-2016(2021) Thermoplastics pipes－Determination of ring stiffness
KS C 2006-2023 Testing method for ball pressure of thermoplastics
KS M ISO 2114:2010 Plastics(polyester resins) and paints and varnishes(binders)－Determination of partial acid value and total acid value
KS M ISO 2554-2020 Plastics－Unsaturated polyester resins－Determination of hydroxyl value
KS M ISO 2114-2020 Plastics(polyester resins) and paints and varnishes(binders)－Determination of partial acid value and total acid value
KS M ISO 9967-2016(2021) Thermoplastics pipes－Determination of creep ratio
KS E ISO 1928-2020 Solid mineral fuels — Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
KS M ISO 2554-2010(2020) Plastics－Unsaturated polyester resins－Determination of hydroxyl value
KS E ISO 1928-2015(2020) Solid mineral fuels — Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
KS M ISO 306-2015(2020) Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)
KS M ISO 2554:2010 Plastics－Unsaturated polyester resins－Determination of hydroxyl value
KS M ISO 306-2020 Plastics－Thermoplastic materials－Determination of Vicat softening temperature(VST)

British Standards Institution (BSI)

BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS EN ISO 8975:1995 Plastics. Phenolic resins. Determination of pH
BS EN ISO 307:2007+A1:2013 Plastics - Polyamides - Determination of viscosity number
BS EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number
BS EN ISO 2578:1993 Plastics - Determination of the time-temperature limits after prolonged exposure to heat
BS PD CEN/TS 16892:2015 Plastics. Welding of thermoplastics. Specification of welding procedures
BS EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
BS EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
BS EN ISO 7808:1993 Plastics. Thermosetting moulding materials. Determination of transfer flow
BS EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Designation
BS EN ISO 21654:2021 Solid recovered fuels. Determination of calorific value
BS EN ISO 8975:1995(1999) Method 451K Plastics — Phenolic resins — Determination ofpH
BS ISO 16790:2021 Plastics. Determination of drawing characteristics of thermoplastics in the molten state
BS ISO 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
BS EN ISO 2554:1999 Plastics. Unsaturated polyester resins. Determination of hydroxyl value
BS EN ISO 293:2023 Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 2114:2000(2002)*BS 2782-4-Method 432B:2000 Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value and total acid value
BS EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio
BS ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
BS 89100:2017 Plastics. Joining of thermoplastic moulded components. Specification of variables for thermal joining processes
BS 5955-8:2001 Plastics pipework (thermoplastics materials). Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings
BS EN ISO 9969:1995 Thermoplastics pipes - Determination of ring stiffness
BS EN ISO 9967:2016 Thermoplastics pipes. Determination of creep ratio
BS EN 638:1995 Plastics piping and ducting systems - Thermoplastics pipes - Determination of tensile properties
BS EN ISO 306:2022 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)

RU-GOST R

GOST 147-2013 Solid mineral fuel. Determination of gross calorific value and calculation of net calorific value
GOST R 54261-2010 Resources saving. Waste management and energy production. Standard test method for gross calorific and ash value of waste materials
GOST 33108-2014 Solid recovered fuel. Determination of calorific value
GOST 33106-2014 Solid biofuel. Determination of calorific value
GOST R ISO 306-2012 Plastics. Thermoplastic materials. Determination of Vicat softening temperature
GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics
GOST R 50490-1993 Plastics. Unsaturated polyester resins. Determination of hydroxyl value
GOST R 50490-2015 Plastics. Unsaturated polyester resins. Determination of hydroxyl value
GOST 27319-1987 Thermoplastic materials. Method of determination of thermal bonding strength
GOST R ISO 580-2008 Plastics piping systems. Injection-moulded thermoplastics fittings. Methods for determination of fittings appearance alteration after heating
GOST 11645-1973 Plastics. Determination of flow index of thermoplastics melt by extrusion plastometer

YU-JUS

JUS G.S2.605-1980 Plastics Compression moulding test specimens of thermosetting materials
JUS G.S1.756-1991 Plastics.Phenolic resins.Determination of PH
JUS G.S2.601-1991 Plastics.Determaination of the melt flow rate of thermoplastic
JUS G.S2.607-1980 Plastics. Recommended practice for injection moulding of thermoplastic specimens
JUS G.S2.641-1991 Pastics.Thermoplastic materials.Determination of Vicat softening temperature
JUS G.S1.801-1990 Plastics. Unsaturate? polvester resins. Determination of acid value
JUS G.S1.802-1990 Plastics. Unsaturate? polvester resins. Determination of hvdroxvl value
JUS G.S2.741-1996 Plastics - Optical properties of thermoplastic films - Determination of clarity of transparent plastic films
JUS G.S2.740-1996 Plastics - Optical properties of thermoplastic films - Determination of specular gloss of plastic films
JUS G.S2.742-1996 Plastics - Optical properties of thermoplastic films - Determination of haze of transparent plastic films

GM Europe

GME 14012-2008 Thermoplastic Tubing for Hot Diesel Fuel Lines (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14587.)

CZ-CSN

CSN 64 0861-1979 Plastios. Determination of melt flow index of thermoplastics
CSN 64 0521-1984 Plastics. Determination of the Vicat oftening temperature of thermo- lastics
CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials
CSN ISO 8975:1994 Plastics. Phenolic resins. Determination of pH
CSN 44 1352-1980 Solid fuels. Determination of calorific values
CSN 34 6501 Cast.8-1989 Thermal endurance of plastic films
CSN 64 0210-1987 Injection moulding of test specimens of hermoplastics
CSN 64 0626-1989 Plastics. Determination of tensile trenght of thermoplastics pipes on n annular test piece
CSN 64 0321-1963 Testing of polystyrene hermoplastics

United States Navy

NAVY QPL-24519-2010 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-31 NOTICE 1-2008 Molding Plastics, Electrical, Thermoplastic
NAVY QPL-24519-2013 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-31-2005 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC
NAVY QPL-24519-QPD-2010 Molding Plastics, Electrical, Thermoplastic

TR-TSE

TS 1149-1978 PLASTICS - INJECTION MOULDING TEST SPECIMENS OF TERMOPLASTIC MATERIALS
TS 1408-1978 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
TS 1825-1975 PLASTICS DETERMINATION OF THE VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS
TS 986-1971 PLASTICS DETERMINATION OF INCANDESCENCE RESISTANCE OF RIGID SELFEXTINGUISHING THERMOSETTING PLASTICS
TS 859-1970 THERMOPLASTIC INSULATION TAPE
TS 1148-1978 PLASTICS-COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
TS 1800-1975 POLYETHYLENE THERMOPLASTIC MATERIALS — DESIGNATION —
TS 2403-1976 PLASTICS — UNSATURATED POLYESTER RESINS DETERMINATION OF HYDROXYL VALUE

European Committee for Standardization (CEN)

EN ISO 307:2003 Plastics - Polyamides - Determination of viscosity number ISO 307: 2003
EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
EN ISO 307:1997 Plastics - Polyamides - Determination of Viscosity Number ISO 307: 1994
EN ISO 307:2019 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019)
EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number (ISO 307:2007)
CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994
EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
PD CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
EN ISO 295:1998 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials ISO 295:1991
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials ISO 16137:2006
EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
EN 1778:1999 Characteristic values for welded thermoplastic constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment
EN 15400:2011 Solid recovered fuels - Determination of calorific value
EN ISO 21654:2021 Solid recovered fuels - Determination of calorific value (ISO 21654:2021)
EN ISO 3994:2000 Plastics Hoses - Helical-Thermoplastic-Reinforced Thermoplastics Hoses for Suction and Discharge of Aqueous Materials - Specification
EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
EN ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
EN ISO 8975:1995 Plastics - Phenolic Resins - Determination of pH (ISO 8975 : 1989)
EN ISO 9967:1995 Plastics Pipes - Determination of Creep Ratio (ISO 9967 : 1994)

VDI - Verein Deutscher Ingenieure

VDI 2006-1979 Shaping of injection mouldings made from thermoplastics
VDI 2006-1970 Gestalten von Spritzgussteilen aus thermoplastischen Kunststoffen
VDI 2545-1981 Gear wheels made from thermoplastics

SE-SIS

SIS SS 18 71 72-1984 Biofuels - Determination of gross calorific value by calorimeter and calculation of net calorific value
SIS SS 18 71 82-1990 Solid fuels — Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value
SIS SS-ISO 4589:1988 Plastics — Determination of flammability by oxygen index

CEN - European Committee for Standardization

EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics
EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
EN ISO 18125:2017 Solid biofuels - Determination of calorific value
EN ISO 7808:1998 Plastics - Thermosetting moulding materials- Determination of transfer flow
EN ISO 9969:2007 Thermoplastics pipes - Determination of ring stiffness

RO-ASRO

STAS 12155-1982 PLASTICIZERS FOR PLASTICS Ester content and saponification value determination
STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics
STAS 6127-1968 plastic. Determination of tear resistance of thermoplastic materials
STAS SR ISO 8975:1989 Plastics - Phenolic resins-Determination of pH
STAS 5887-1968 plastic. Generation of heat-reactive plastic specimens
STAS 7801-1986 PLASTICS FOLYVINYL CHLGRIDE Determination of pH of aqueous extract
STAS 6129-1980 PLASTICS Determination of frost brittle point of foils and plates of thermosetting materials
STAS SR ISO 1928:1995 Solid mineral fuels Determination of gross calorific value by the calorimeter bomb method and calculation of net calorific value
STAS E 12194-1984 PLASTICS Shrinkage determination of thermoplastic materials used lor injection moulding
STAS 12321-1985 PLASTICS. COMBUSTIBILITY DETERMINATION BY OXYGEN INDEX METHOD

CH-SNV

VSM 15158-1971 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres)
SNV 93100-1966 Plastic (organic plastic) material testing. Complies with Vicat’s thermoplastic softening temperature regulations
VSM 11855-1974 plastic. Thermosetting molding materials. Determination of shrinkage
SN 234 352-1978 Shell end mills with tenon drive

NL-NEN

NEN 1884-1980 Liquid fueis - Determination of the gross calorie value with an adiabatic calorimeter and derivation of the net calorific value

CU-NC

NC 15-74-1987 Thermotechnics. Material Thermal Conductivity Values

AGMA - American Gear Manufacturers Association

P149.03-1983 Prediction of the Peak Temperature on the Surface of Thermoplastic Gear Teeth

American Society for Testing and Materials (ASTM)

ASTM D5468-02 Standard Test Method for Gross Calorific and Ash Value of Waste Materials
ASTM F409-17 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
ASTM D4868-00(2010) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 281-1947 Tubing - Thermoplastic (Rev. 1)

GOST

GOST 11645-2021 Plastics. Methods for determination of flow index of thermoplastics melt

CO-ICONTEC

ICONTEC 1493-1979 Measurement methods for floor types, plastic limits and plasticity values
ICONTEC 1551-1980 plastic. PVC resin, pH measurement of liquid extracts

KR-KS

KS M ISO 18125-2021 Solid biofuels — Determination of calorific value
KS M ISO 9967-2016 Thermoplastics pipes－Determination of creep ratio
KS M ISO 9969-2016 Thermoplastics pipes－Determination of ring stiffness

CL-INN

INDITECNOR 55-17d-1962 Thermoplastics in Circuit Conductor Covers:

ECIA - Electronic Components Industry Association

230-1959 Color Marking of Thermoplastic Covered Wire

Standard Association of Australia （SAA）

AS 1368:2000 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

AR-IRAM

IRAM 13 349-1963 Plastic conduit dimensions and standard pressure values

(U.S.) Ford Automotive Standards

FORD WD 954-2012 Material and Performance Requirements for Screws Used in Thermoplastics Materials
FORD WD954-2015 Material and Performance Requirements for Screws Used in Thermoplastics Materials

National Sanitation Foundation (NSF)

NSF 21-2015 Thermoplastic refuse containers

International Federation of Trucks and Engines

NAVISTAR CEMS DT-11-2001 Heat Stability of Thermoplastic Trim Materials
NAVISTAR MPAPS L-6040-2016 Thermoplastic Elastomer Molding Compounds

Indonesia Standards

SNI 06-4595-1998 Plastics - Injections moulding test specimens of thermo plastic materials

American National Standards Institute （ANSI)

ANSI/ASHRAE Standard 41.13-2023 Standard Methods for Fuel Higher Heating Value Measurement
ANSI/NSF 21-1996 Thermoplastic Refuse Containers

Others: Calorific value of plastic,Calorific value of plastic,calorific value of plastic,Calorific value of combustion plastic,calorific value of plastic,Calorific value of propane,Calorific value of combustion of plastic,calorific value of plastic,Calorific value of plastic,calorific value of plastic,Calorific value of polypropylene,Calorific value of plastic products,Calorific value of oxygen,Plastic specific heat value,calorific value of coal,Calorific value of polypropylene plastic,How much calorie is the calorific value of plastic,Calorific value measurement,Calorific value of plastic