Mechanical behavior

Mechanical behavior, Total:209 items.

The international standard classification for "Mechanical behavior" includes: Bolts, screws, studs , Washers, locking elements , Rivets , Nuts , Insulators , Protective clothing , Footwear , Ropes , Accessories for lifting equipment , Electrical wires and cables in general , Fiber and cables , Radiation protection , Fasteners in general , Ophthalmic equipment , Fasteners , Magnetic storage devices in general , Aerials , Products of the textile industry , Other products of the textile industry , Textiles in general , Seals, glands , Medical equipment .

The Chinese standard classification for "Mechanical behavior" includes: Fastener , Special electronic technology material , Insulator , Articles for labor protection , Footgear , Tools for aquatic product and fishery , Basic standards and general methods , Hoisting machinery , Wire with insulation layer , Optical communication equipment , Radiation protection instrument , Medical optical instrument and endoscope , Data medium , Technical management , Technical management , Antenna and its feeder , Basic standards and general methods , Threads, straps and ropes , Chemical fibre in general , Sealing and sealing device .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15972.3-1998 Generic specification for optical fibres―Part 3:Measuring methods for mechanical characteristics
GB/T 4074.3-2008 Winding wires - Test methods - Part 3: Mechanical properties
GB/T 20654-2006 Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials
GB/T 3098.23-2020 Mechanical properties of fasteners—M42～M72 bolts, screws and studs
GB/T 2649-1989 Methods of sampling for mechanical properties tests of welded joint
GB/T 3098.1-2000 Mechanical Properties of Fasteners - Bolts, Screws and Studs
GB/T 3098.20-2004 Mechanical properties of fasteners - Wing nuts with specified proof torque
GB/T 3098.16-2014 Mechanical properties of fasteners―Stainless steel set screws
GB/T 3098.14-2000 Mechanical properties of fasteners - Widening test on nuts
GB/T 3098.2-2000 Mechanical properties of fasteners—Nuts—Coarse thread
GB/T 3098.4-2000 Mechanical properties of fasteners-Nuts-Fine pitch thread
GB/T 8834-2006 Ropes - Determination of certain physical and mechanical properties
GB/T 2309-1980 Mechanical properties of interchangeable magnetic six-disk pack
GB/T 3098.15-2014 Mechanecal properties of fasteners-Nuts made of stainless-steel
GB/T 25496-2010 Test methods for the mechanical properties of getters
GB/T 3098.21-2014 Mechanical properties of fasteners. Stainless steel tapping screws
GB/T 3098.8-2010 ~Mechanical Properties of Fasteners - Parts for Bolted Connections for Use at Temperatures from-200℃~+700℃
GB/T 4074.3-1999 Test methods for winding wires-Part 3:Mechanical properties
GB/T 3098.15-2023 Mechanical properties of fasteners—Stainless steel nuts
GB/T 3098.9-2020 Mechanical properties of fasteners—Prevailing torque type steel nuts
GB/T 3098.12-1996 Mechanical properties of fasteners —Cone proof load test on nuts
GB/T 3098.21-2008 Mechanical properties of fasteners - Part 21:Tapping screws of stainless-steel
GB/T 34138-2017 Radiation protection instrumentation-Environmental，electromagnetic and mechanical performance requirements
GB/T 3098.10-1993 Mechanical properties of fasteners - Bolts, scrows, studs and nuts made of non-ferrous metals
GB/T 3098.6-2014 Mechanical Properties of fasteners- Stainless steel bolts, screws and studs
GB/T 3098.3-2016 Mechanical properties of fasteners-Set screws
GB/T 8834-2016 Fibre ropes—Determination of certain physical and mechanical properties
GB/T 41937-2022 Rubber- or plastics-coated fabrics—Physical and mechanical tests—Determination of flex resistance by the flexometer method
GB/T 3098.13-1996 Mechanical properties of fasteners—Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
GB/T 3098.6-2000 Mechanical properties of corrosion-resistant stainless-steel fasteners-Part 1:Bolts,screws and studs
GB/T 3903.27-2008 Footwear—Test methods for stiffeners and toepuffs—Mechanical characteristics
GB/T 3098.16-2000 Mechanical properties of fasteners-Set screws made of stainless-steel
GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs
GB/T 3098.5-2000 Mechanical properties of fasteners - Tapping screws
GB/T 3098.24-2020 Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications
GB/T 3098.5-2016 Mechanical properties of fasteners - Tapping screws
GB/T 3098.8-1992 Mechanical properties of fasteners―Components for blted connections made mainly from materials with a high temperature strength
GB/T 3098.11-2002 Mechanical properties of fasteners - Drilling screws with taping screw thread
GB/T 22708-2008 Thermal-mechanical performance test and mechanical performance test on string insulator units
GB/T 3098.15-2000 Mechanecal properties of fasteners - Nuts made of stainless-steel
GB/T 3098.6-2023 Mechanical properties of fasteners—Stainless steel bolts，screws and studs
GB/T 3098.7-2000 Mechanical properties of fasteners-Thread rolling screws
GB/T 11417.6-2012 Ophthalmic Optics - Contact Lenses - Part 6: Mechanical Properties Test Methods
GB/T 8834-1988 Ropes; Determination of certain physical and mechanical properties
GB/T 3098.3-2000 Mechanical properties of fateners - Set screws
GB/T 3098.26-2021 Mechanical properties of fasteners—Flat washers
GB/T 3098.25-2020 Mechanical properties of fasteners—Guidance for the selection of stainless steels and nickel alloys for fasteners
GB/T 10051.1-1988 Lifting hooks Mechanical properties,lifting capaciti-es,stresses and materials
GB/T 3098.17-2000 Mechanical properties of fasteners-Preloading test for the detection of hydrogen embrittlement-Parallel bearing surface method
GB/T 3098.19-2004 Mechanical properties of fasteners - Blind rivets with break pull mandrel
GB/T 3098.2-2015 Mechanical properties of fasteners—Nuts
GB/T 20655-2006 Protective clothing - Mechanical properties - Determination of theresistance to puncture
GB/T 39254-2020 Additive manufacturing—Evaluation guideline for mechanical properties of metal parts
GB/T 3098.9-2002 Mechanical properties of fasteners--Prevailing torque type steel hexagon unts
GB/T 3098.18-2004 Mechanical properties of fasteners - Blind rivets testing

Professional Standard - Electron

SJ 2496-1984 Tapping screws of heat treated steel-Mechanical properties
SJ 2819-1987 Tapping screws of heat treated steel - Mechanical properties
SJ/T 11322-2006 Measurement method for reflector antenna and servo gear system mechanical performance
SJ/Z 9118.4-1987 Magnetic tape sound recording and reproducing systems - Part 4: Mechanical magnetic tape properties

Professional Standard - Textile

FZ 65001-1995 Special mechanical fabric - physical and mechanical property test methods
FZ 65003-1995 Special industrial strand - physical and mechanical property test methods
FZ 65002-1995 Special industrial drawstrings and cords - physical and mechanical property test methods
FZ/T 60021-2021 Test method for physical properties of belt
FZ/T 60021-1996 Test Method for Physical Properties of Belt

Professional Standard - Machinery

JB/T 3568-1999 Thermal-mechanical performance test on string insulator units
JB/T 6370-2011 Test method for physical mechanical performance of flexible graphite ring
JB/T 6370-1992 Physical and mechanical properties of flexible graphite packing rings Test method

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3597-2019 Guidelines for Testing Methods of Mechanical Properties of Additively Manufactured Metal Materials

Group Standards of the People's Republic of China

T/CAEPI 12.5-2017 Technical requirements of diesel vehicle exhaust after-treatment devices Part 5: Mechanical performance
T/HDSC 001-2022 Huidong Ladies Shoes Guidelines for physical and mechanical properties of high quality shoes materials
T/CPPC 1109-2025 Mechanical properties of metal parts: nuts

Henan Provincial Standard of the People's Republic of China

DB41/T 1684-2018 General technical requirements for mechanical properties of garbage compression and transfer equipment

Professional Standard - Medicine

YY 0290.3-2018 Ophthalmic optics—Intraocular lenses—Part 3:Mechanical properties and test methods
YY 0068.2-2008 Medical endoscopes—Rigid endoscope—Part 2:Mechanical properties and test methods

Society of Automotive Engineers (SAE)

SAE J1397_198812 Estimated Mechanical Properties and Machinability of Steel Bars
SAE J1397_199205 Estimated Mechanical Properties and Machinability of Steel Bars
SAE J1397_198207 Estimated Mechanical Properties and Machinability of Steel Bars
SAE J1397_202403 Estimated Mechanical Properties and Machinability of Steel Bars
SAE J413B_197811 Mechanical Properties of Heat Treated Wrought Steels
SAE J413_200202 Mechanical Properties of Heat Treated Wrought Steels
SAE J413_202412 Mechanical Properties of Heat Treated Wrought Steels
SAE J413_201110 Mechanical Properties of Heat Treated Wrought Steels
SAE J413_199006 Mechanical Properties of Heat Treated Wrought Steels
SAE J413-1932 Mechanical Properties of Heat Treated Wrought Steels
SAE J413-1990 Mechanical Properties of Heat Treated Wrought Steels (June 1990)
SAE J413B-1978 MECHANICAL PROPERTIES OF HEAT TREATED WROUGHT STEELS
SAE J82-2013 Mechanical and Quality Requirements for Machine Screws
SAE J413-2002 Mechanical Properties of Heat Treated Wrought Steels

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60575:1997 Thermal - mechanical performance test and mechanical performance test on string insulator units.
OS GSO ISO 2702:2015 Heat-treated steel tapping screws -- Mechanical properties
OS GSO ISO 13996:2013 Protective clothing -- Mechanical properties -- Determination of resistance to puncture

German Institute for Standardization

DIN 1746-1:1968 Aluminum tube mechanical properties
DIN SPEC 91064:2015-02 Mechanical properties test methods
DIN 1747-1:1968 Bar, rod and wire of aluminium - Mechanical properties
DIN 17672-1:1969 Mechanical properties of rods and wires
DIN 66208-1:1974-04 Instrumentation tape; mechanical properties and designation
DIN 17671-1:1969 Mechanical properties of copper and copper alloy tubes
DIN 51175:2021 Vitreous and porcelain enamels - Determination of thermomechanical properties

Indonesia Standards

SNI IEC 60575:2009 Uji Kinerja Termal Mekanis dan Uji Kinerja Mekanis pada Unit Insulator Renteng

International Electrotechnical Commission (IEC)

IEC 60851-3:1997 Winding wires - Test methods - Part 3: Mechanical properties
IEC TR 60575:1977 Thermal-mechanical performance test and mechanical performance test on string insulator units

Bureau of Indian Standards

IS/IEC TR 60575-1977 Thermal-Mechanical Performance Test and Mechanical Performance Test on String Insulator Units
IS 1595-1967 Enamelled round copper wire with high mechanical properties

Czech Standards Institute (UNMZ)

CSN 42 4080 Cast.8-1985 Aluminium profiles. Mechanical properties
CSN 72 1175-1989 Determination of mechanical proper- ties of aggregates
CSN 42 4280 Cast.8-1985 Aluminium alloys profiles. Mechanical properties
CSN 42 4480 Cast.8-1985 Aluminium alloys profiles. Mechanical properties
CSN 42 3080 Cast.1-1986 Copper sheets, bands and strips. Mechanical and technological properties
CSN 42 4080 Cast.4-1986 Aluminium extruded and cold drawn rods. Mechanical properties
CSN 36 8445-1985 Magnetic tapes. Methods of measurements of physical-machanical properties

Korean Agency for Technology and Standards (KATS)

KS B 0234-2020 Mechanical properties of steel nuts
KS B 0234-1986 Mechanical properties of steel nuts
KS B 0234-2004 Mechanical properties of steel nuts
KS B 0234-2009(2020) Mechanical properties of steel nuts
KS B 0240-1986 Mechanical properties of steel set screws
KS B 0240-2021 Mechanical properties of steel set screws
KS B 0240-2016 Mechanical properties of steel set screws
KS B 0233-2020 Mechanical properties of steel bolts and screws
KS B 0145-2021 Mechanical properties of non-ferrous metal fasteners
KS B 0233-2005(2020) Mechanical properties of steel bolts and screws
KS B 0145-2016(2021) Mechanical properties of non-ferrous metal fasteners
KS B 0233-1986 Mechanical properties of steel bolts and screws
KS B 0233-2005(2020)(英文版) Mechanical properties of steel bolts and screws
KS B 0145-2016 Mechanical properties of non-ferrous metal fasteners

GCC Standardization Organization

GSO IEC TR 60575:1997 Thermal - mechanical performance test and mechanical performance test on string insulator units.
GSO ASTM D4485:2010 Standard Specifications for Performance of Engine Oils
GSO ISO 2702:2015 Heat-treated steel tapping screws -- Mechanical properties
GSO ISO 13996:2013 Protective clothing -- Mechanical properties -- Determination of resistance to puncture

American Society for Testing and Materials (ASTM)

ASTM STP 1413-2001 Mechanical properties structural films
ASTM STP 1173-1994 Biomaterials' Mechanical Properties
ASTM STP 1173-94 Biomaterials' Mechanical Properties
ASTM RR-B06-1000 1977 Aluminum casting mechanical properties test report
ASTM D4092-07(2013) Standard Terminology for Plastics: Dynamic Mechanical Properties
ASTM A344-68(1972) Methods of Electrical and Mechanical Properties of Magnetic Materials

Association Francaise de Normalisation

NF G91-006:1984 Slide fasteners. Classification. Mechanical properties.
NF E25-650-1:1994 Heat-treated steel tapping screws. Mechanical properties.

Japanese Industrial Standards Committee (JISC)

JIS B 1055:1995 Tapping screws -- Mechanical properties
JIS B 1052:1991 Mechanical properties of steel nuts
JIS B 1052:1998 Mechanical properties of steel nuts
JIS B 1053:1995 Mechanical properties of steel set screws
JIS B 1057:2001 Mechanical properties of non-ferrous metal fasteners
JIS B 1057:1994 Mechanical properties of non-ferrous metal fasteners

Netherlands Institute for Standardization

NEN 3662-1988 Windows and doors - Mechanical properties - Requirements
NEN 3519-1969 Plywood. Determination of mechanical properties
NEN 3217-1967 Partiele board Physical and mechanical tests

International Organization for Standardization (ISO)

ISO/CD 13061-15:2024 Physical and mechanical properties of wood
ISO/PRF 13061-13:2023 Physical and mechanical properties of wood
ISO/CD 13061-16:2024 Physical and mechanical properties of wood
ISO/PRF 13061-14:2023 Physical and mechanical properties of wood
ISO 1640:1974 Wrought copper alloys; Forgings; Mechanical properties
ISO 2702:1992 Heat-treated steel tapping screws; mechanical properties
ISO 1338:1977 Cast copper alloys — Composition and mechanical properties
ISO 1639:1974 Wrought copper alloys; Extruded sections; Mechanical properties
ISO/R 829:1968 Mechanical property limits for aluminium alloy forgings
ISO 2702:1974 Heat-treated steel tapping screws — Mechanical properties

British Standards Institution (BSI)

BS 3415:1961 Specification for mechanical performance of venetian blinds
BS EN 683-2:1997 Aluminium and aluminium alloys. Finstock-Mechanical properties
BS 6811-2-2.3:1992 Winding wires. Methods of test-Mechanical properties
BS EN 683-2:2024 Aluminium and aluminium alloys. Finstock - Mechanical properties
BS EN 71-1:2005+A6:2008 Safety of toys — Part 1: Mechanical and physical properties
BS EN 603-2:1997 Aluminium and aluminium alloys - Wrought forging stock - Mechanical properties
BS 2782-3:1957 Methods of testing plastics Mechanical properties
BS EN 60851-3:2009+A1:2013 Winding wires. Test methods. Mechanical properties
BS 6811-2-2.3:1987 Winding wires. Methods of test.-Mechanical properties
BS EN 60851-3:1998 Methods of test for winding wires-Mechanical properties
BS EN ISO 2702:1995 Heat-treated steel tapping screws. Mechanical properties
BS EN 60851-3:2009 Winding wires. Test methods. Mechanical properties
BS EN 60851-3:2009+A2:2019 Winding wires. Test methods - Mechanical properties
BS EN IEC 60851-3:2023 Winding wires. Test methods - Mechanical properties
BS EN 546-2:2007 Aluminium and aluminium alloys - Foil - Mechanical properties
BS EN ISO 2702:2011 Heat-treated steel tapping screws. Mechanical properties
BS EN 546-2:1997 Specification for aluminium and aluminium alloys - Foil - Mechanical properties

South African Bureau of Standard

SANS 613:2009 Fenestration products - Mechanical performance criteria

Ente Nazionale Italiano di Unificazione

UNI EN 546-2:1998 Aluminium and aluminium alloys - Foil - Mechanical properties.
UNI 11842:2021 Determination of the physical and mechanical properties of bamboo culms
UNI EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties

Türk Standardları Enstitüsü

TS 3221-1981 ENAMELLED ROUND COPPER WIRES WITH HIGH MECHANICAL PROPERTIES

Spanish Association for Standardization (UNE)

UNE 38035:1981 MECHANICAL CHARACTERISTICS OF MAGNESIUM ALLOYS SHEET AND PLATE
UNE 38038:1980 MECHANICAL CHARACTERISTICS OF MAGNESIUM ALLOYS FORGINGS

American Petroleum Institute (API)

API TR 10TR7-2017 Mechanical Behavior of Cement (FIRST EDITION)

American Concrete Institute

ACI SP-156 Mechanical properties of the interface transition zone

Associação Brasileira de Normas Técnicas

ABNT PB-581-1979 Mechanical properties of stainless steel flat rolled products

Standards Norway

NS 1867:1969 Mechanical properties and testing of steel screws
NS 1868:1969 Mechanical properties and testing of steel nuts
NS 1844-1973 Heat-treated steel tapping screws - Mechanical properties
NS 1844:1973 Heat-treated steel tapping screws — Mechanical properties

GM Daewoo

GMKOREA EDS-G-1112-2012 Mechanical Properties of Steel Bolts and Screws

Swedish Institute for Standards

SS 818131:1981 Windows - Mechanical property - Requirements and test
SIS SS 81 81 31-1981 Windows - Mechanical property - Requirements and test
SS-EN 683-2:2024 Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
MNC 335-1980 Metallic materials — Determination of various mechanical properties
MNC 335-1983 Metallic materials — Determination of various mechanical properties
MNC 335-1981 Metallic materials — D eterm i nation of various mechanical properties

Danish Standards Foundation

DS/EN ISO 2702:1994 Heat-treated steel tapping screws - Mechanical properties
DS/EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties
DANSK DS/EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties

Gosstandart of Russia

GOST R IEC 851-3-1994 Methods of test for winding wires. Mechanical properties
GOST 6966-1966 Welded joints. Methods of mechanical properties determination
GOST ISO 2702-2015 Heat-treated steel tapping screws. Mechanical properties

American Welding Society (AWS)

WRC 340:1989 Interpretive Report On The Mechanical Properties Of Brazed Joints

Austrian Standards

ONORM M 3413 Teil.1-1976 Drop forgings of wrought copper and copper alloys; mechanical properties
ONORM M 3416 Teil.1-1980 Wires ofwrought copper and copper alloys; mechanical properties
ONORM M 3411 Teil.1-1976 Tubes of wrought copper and copper alloys; mechanical properties

Magyar Szabványügyi Testület

MSZ 770/2-1979 Mechanical properties of brass steel plates and bars

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 13996:2016 Protective clothing -- Mechanical properties -- Determination of resistance to puncture
BH GSO ISO 2702:2017 Heat-treated steel tapping screws -- Mechanical properties

National Electrical Manufacturers Association（NEMA)

NEMA MP 6-2019 Guide for Application Considerations—Mechanical Properties

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4412:2015 Mechanical properties of heat-treated steel self-tapping screws
AS/NZS 4412:1996 Heat-treated steel tapping screws - Mechanical properties