Voltage and conductance

Voltage and conductance, Total:400 items.

The international standard classification for "Voltage and conductance" includes: Thermoplastic materials , Power stations in general , Transformers. Reactors , Insulating oils , Electrical engineering in general , Power transmission and distribution networks in general , Integrated circuits. Microelectronics , Conduits for electrical purposes , Telecommunications in general , Aluminium products , Telecontrol. Telemetering , Environmental testing , Power transmission and distribution networks , Wires , Rectifiers. Convertors. Stabilized power supply , Analytical chemistry in general , Plastics and rubber insulating materials , Wind turbine systems and other alternative sources of energy , Cables , Aerospace fluid systems and components , Ropes .

The Chinese standard classification for "Voltage and conductance" includes: Synthetic resin and plastic , Transformer , Power transmission and transformation engineering , Electric power testing technique , , Codification , Electric power system , Insulating oil , Basic standards and general methods , Hygiene, safety and labor protection , Semiconductor integrated circuit , Relay protection and automatic device , Low voltage apparatus in general , Basic standards and general methods , Telephone communication equipment , Light metals and their alloys , Radar, navigation, remote control, remote measuring and antenna synthesis , Electronic and electrical equipment , Fuel oil , Power semiconductor device and parts , Electrochemical, thermochemistry and optical profile type analyzer , Electrical system and equipment , Pipe fittings, clamps and seals , Cable and its accessory , Electrical insulating material and its products , Wind energy , Technical management , Locomotives in general , Threads, straps and ropes .

Group Standards of the People's Republic of China

T/CEEIA 610-2022 Semi-conductive tapes for buffer layer of power cables of rated voltages 110 kV and above
T/CEC 556-2021 Guidelines for installation, commissioning, operation and maintenance of high-voltage AC cable on-line monitoring device
T/CSEE 0132-2019 Technical Guidelines for Automatic Voltage Control of Wind Farms and Photovoltaic Power Stations
T/CSEE 0157-2020 Guidelines for Operation and Maintenance of 1000kV Transformers in Power Plants
T/GDWCA 0132-2023 ACSR conductor aerial insulated cables for rated voltages of 1 kV
T/QGCML 188-2021 High-voltage transmission line conductor connection method
T/CECA-G 0020-2019 Technical Guidelines for Industrial Parks Participating in Power Demand Response
T/CEEIA 756-2023 Technical guide for high precision lightning detection in medium and low voltage distribution networks distributed photovoltaic
T/CEEIA 757-2023 Lightning overvoltage monitoring and calculation guide for medium and low voltage distribution networks
T/JPALPDM 0008-2024 Selection and installation guide for low voltage surge protectors in energy stations
T/SHPTA 014.2-2021 Modified polypropylene compounds for power cables of rated voltages from 6 kV up to 35 kV―Part 2:Semi-conductive shielding compounds
T/CPSS 1004-2022 Guidelines for risk assessment of voltage sag sensitive users accessing power grid
T/CEEIA 705-2023 Guidelines on seismic test for power transformers
T/CSEE 0063-2017 Technical guidelines for voltage source converters on user side of distribution network
T/SHPTA 089-2024 Semi-conductive shielding compound for crosslinked polyethylene insulated cable of rated voltage form 66kV up to 500kV
T/CEC 550-2021 Guidelines for the operation and maintenance of electric desalinated water treatment devices in thermal power plants
T/CAS 256-2016 Rated Voltage 0.6/1 kV Aluminum Alloy Conductor Extruded Insulation Frequency Changer Power Cable
T/CEEIA 301-2018 The selection and use of guidelines of low-voltage device for isolation and fuses
T/CSEE 0209-2021 Guidelines for testing low-voltage power emergency power supply equipment
T/CSEE /Z0028-2017 Guidelines for the detection and location of discharge points in substations based on antenna arrays
T/CSEE 0222-2021 Technical guidelines for UHF detection and separation of multiple partial discharge sources in oil-immersed transformers (reactors)
T/CEC 325-2020 Guidelines for testing power electronic transformers for AC and DC distribution networks
T/CEC 505-2021 Guidelines for insulation tests of dry-type high-frequency transformers for power electronic transformers
T/SDAS 243-2021 Semi-conductive shielding material for extruded insulated cables with rated voltage 35kV and below
T/CEC 135-2017 Guidelines for the Measurement and Verification of Power Savings in Waste Heat and Pressure Power Generation Projects
T/CCIAC 002-2022 Technical Guide for low-voltage reactive power compensation of calcium carbide furnace
T/GDWCA 0133-2023 ACSR conductor aerial insulated cables for rated voltages of 10 kV
T/JDLXH 001-2023 Rated Voltage 10kV Steel Core Aluminum Stranded Conductor Overhead Insulated Cable

Professional Standard - Electricity

DL/T 884-2019 Power plant metallography inspection and assessment guideline
DL/T 884-2004 Power plant metallography inspection and assessment guideline
DL/T 363-2010 Technical guide of equipment manufacturing supervision of EHV and UHV power transformers (reactors)
DL/T 2000-2019 Guide for on-site united partial discharge measurement for 1000kV main transformer with voltage regulating and compensating transformer
DL/T 2184-2020 Test guide for transient behaviour of DC voltage transformers for DC transmission system
DL/T 2305-2021 Guidelines for altitude correction of HVDC air gap flashover voltage
DL/T 2071-2019 Technical guidelines for voltage quality control of distribution network
DL/T 2223-2021 Guide for long wave-front time impulse voltage test technology
DL/T 1111-2009 Guide for energy saving by variable speed drive of high voltage induction motors in thermal power plant
DL/T 1419-2015 Guidelines for Transformer Oil Regeneration and Use
DL/T 363-2018 Technical guide of equipment manufacturing supervision of EHV and UHV power transformers and reactors
DL/T 573-2010 Maintenance Guide for Power Transformers
DL/T 573-1995 Guiding principle for examining and repairing power transformers
DL/T 1860-2018 Technical Guidelines for Automatic Voltage Control Test
DL/T 2492-2022 Guideline of order and acceptance for turbine bypass valve for power station
DL/T 1773-2017 Technical guide for electric power system voltage and reactive compensation
DL/T 1807-2018 Oil-immersed power transformer, reactor partial discharge ultrasonic detection and location guidelines
DL/T 1957-2018 Guide for risk assessment and active defense of dc bias of power grids
DL/T 5131-2001 The rural electric network construct and reconstruct technical guide
DL/T 2602-2023 Selection and test guidelines for protective apparatus of electric DC power system
DL/T 5131-2015 The rural electric network construction and reconstruct technical guide
DL/T 537-2002 High-voltage/low-voltage prefabricated cubical substation
DL/T 298-2011 Guide for detection and evaluation of corona defects on stator winding overhangs of generator
DL/Z 1812-2018 The guide for choice of low power capacitor voltage transformers
DL/T 2230-2021 Guide for monitoring of lightening intruding surge overvoltage in AC power system
DL/T 1958-2018 Guide for condition maintenance of electronic voltage transformers
DL/T 1208-2013 Technical Guide for Power Quality Assessment - Deviation of Supply Voltage
DL/T 1543-2016 Guidelines of Selection of Electronic Voltage Transformer
DL/T 2490-2022 Guide of order and acceptance for globe valves and gate valves for power station
DL/T 1959-2018 Guide for condition evaluation of electronic voltage transformers
DL/T 2641-2023 Guide for selection of wide bandwidth voltage measuring device
DL/T 1724-2017 Technical Guidelines for Power Quality Assessment Voltage Fluctuation and Flicker
DL/T 2269-2021 Guide to determining of replacement and reuse for distribution transformer
DL/T 331-2010 Guide of the key parameter coordination for planning and design of generator and power network
DL/T 298-2023 Guide for detection and evaluation of corona defects on stator winding overhangs of generator
DL/T 1172-2013 The Guide of Power System Voltage Stability Evaluation
DL/T 5253-2010(英文版) Design and construction regulations for low-voltage distribution lines with overhead parallel bundled insulated conductors
DL/T 2483-2022 Technical guidelines for generator voltage transformer
DL/T 1375-2014 Technical Guide for Power Quality Assessment — Three-phase Voltage Unblance
DL/T 401-2017 Guide to the selection of high-voltage cables
DL/T 401-2002 Guide to the selection of high-voltage cables
DL/T 2581-2022 Commissioning guide for electrochemical energy storage system of power plant providing frequency regulation ancillary service
DL/T 700-2017 Guide for classification and coding of power materials
DL/T 5253-2010 Design technique and construction regulations for low-voltage distribution network based on the overhead bundled insulated conductors
DL/T 1812-2018 Guidelines for Selection of Low Power Consumption Capacitive Voltage Transformers
DL/T 1539-2016 Guidelines of Selection of High Pressure Casing for Power Transformer (Reactor)
DL/T 1707-2017 Guide on automatic voltage control for power grid
DL/T 1387-2014 Selection Guidelines for Winding Wire in Power Transformer
DL/T 5131-2001(条文说明) The rural electric network construct and reconstruct technical guide(explanation)
DL/T 1438-2015 The Guide for Choice Single-phase Distribution Transformer
DL/T 2495-2022 Selection guidelines for pressure reducing and desuperheating stations
DL/T 1154-2012 Guide for Dielectric Dissipation Factor Test on Rating Voltage of High Voltage Electrical Equipment
DL/T 1531-2016 Over Voltage Protection and Insulation Coordination of 20 kV Distribution Network
DL/T 1808-2018 Guidelines for field test of inter-turn overvoltage of dry-type air-core reactor
DL/T 1388-2014 Selection Guide to the Electrical Steel Strip for Power Transformer
DL/T 1560-2016 Guidelines of onsite assembly and test for disassembly transportation power transformer
DL/T 2044-2019 Guide of calculating resonant overvoltage caused by harmonics in transmission system
DL 511-1993 Guiding principle for classification and coding of spare accessories for power station equipment
DL/T 1563-2016 Guidelines for reliability assessment of medium voltage distribution networks
DL/T 2327-2021 Guide for condition evaluation of inductive voltage transformer
DL/T 866-2004 The guide for selection and calculation of current transformers and voltage transformers
DL/T 1095-2008 Guide to on-site determination of electrostatic charging tendency of transformer oil
DL/T 684-1999 Guide of calculating settings of relay protection for large generator and transformer
DL/T 1769-2017 Guidelines for Operation and Maintenance of Enclosed Busbars in Power Plants
DL/T 1415-2015 Guide for the Protection of High Voltage Shunt Capacitor Installations
DL/T 684-2012 Guide of calculating settings of relay protection for large generator and transformer
DL/T 2328-2021 Guide for condition-based maintenance of electromagnetic voltage transformer
DL/T 312-2010 Guide for AC 1000kV capacitor voltage transformer maintenance
DL/T 1323-2014 Guidance for Measurement of Voltage in On-site Wide Frequency AC Voltage Withstand Test
DL 401-1991 Guidelines for Selection of High Voltage Cables
DL/T 599-2016 Technical guide for the improvement of medium and low voltage distribution network
DL/T 2657-2023 Guidelines for the control of corrosion and scaling in heating networks of power plants

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35711-2017 Analysis, restrain and measurement of harmonics of DC side of high voltage direct current (HVDC) transimission system
GB/T 35007-2018 Semiconductor integrated circuits—Measuring method of low voltage differential signaling circuitry
GB/T 35727-2017 Guideline for standard voltages of medium and low voltage DC distribution system
GB/T 33587-2017 Safety guide for charging electrical system and equipments
GB/T 35710-2017 Rated power evaluation guide for 35 kV and below power transformers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments
GB/T 14114-1993 principles of measuring methods of V/F and F/V converters for semiconductor integrated circuits
GB/T 32898-2016 Configuration guide of relay protection for pump-storage generator and transformer unit
GB/T 17468-1998 The guide for choice power transformers
GB/T 33228-2016 Aluminum alloy extruded tubes for high-frenquency electric transformer
GB/T 17211-1998 Loading guide for dry-type power transformers
GB/T 14733.2-1993 Terminology for telecommunications－Transmission lines and waveguides
GB/T 10236-1988 Guide for evaluation of interference effects and compatibility technology between semiconductor convertors and power supply systen
GB/T 30137-2013 Power Quality - Voltage Dips and Short Interruptions
GB/T 26800-2011 Conduction electrodes
GB/T 13499-2002 Power transformers--Application guide
GB/T 4797.2-1986 Environmental conditions for electric and electronic products appearing in nature--Altitude and air pressure,deepness and water pressure
GB/T 6539-1997 STANDARD test methods for electrical conductivity of aviation and distillate fuels
GB/T 28442-2012 Data classification and coding for navigation electronic map
GB/Z 24847-2009 guide on 1 000 kV AC system voltage and reactive power
GB/T 31367-2015 Technical guide for energy efficiency evaluation of medium and low voltage power distribution networks
GB/T 17468-2008 The Guide for Choice Power Transformers
GB/T 18487.2-2001 Electric vehicle conductive charging system - Electric vehicles requirements for conductive connection to an A.C/D.C.supply
GB/T 28548-2012(英文版) Guideline of nuclear power plant primary circuit hydraulic tests
GB/T 24975-2023 Guideline of environmentally conscious design for low-voltage apparatus
GB/T 5169.47-2022 Fire hazard testing for electric and electronic products—Part 47: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products
GB/T 10236-2006 Guide for compatibility and protection of interference effects between semiconductor convertors and power supply system
GB/T 4377-2018 Semiconductor integrated circuits—Measuring method of voltage regulators
GB/T 4376-1994 Series and products of voltage regulators for semiconductor integrated circuits
GB/T 15164-1994 Loading guide for oil-immersed power transformers
GB/T 17194-1997 Conduits for electrical purposes - Outside diameters of conduits for electrical installations and threads of conduits and fittings
GB/T 1094.7-2008 Power transformers - Part 7: Loading guide for oil-immersed power transformers
GB/T 21545-2008 Principles of protection against overvoltages and overcurrents
GB/T 1094.4-2005 Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors
GB/T 32127-2024 Directives for monitoring and evaluation of power demand response
GB/T 1094.12-2013 Power transformers―Part 12: Loading guide for dry-type power transformers
GB 35007-2018 Semiconductor integrated circuit low voltage differential signal circuit testing method
GB/Z 25843-2010 Specifications for control and protection equipment of ±800kV ultra high voltage direct current transmission
GB/T 4797.2-2005 Environmental conditions for electric ans electronic products appearing in nature - Part 2: Altitude and air pressure, deepness and water pressure

Professional Standard - Aviation

HB 8093-2002 Clamp connecting conduit and conduit for high temperature and high pressure in air system
HB 6-15-1983 pressure welding between conductor joint and wire
HB 6-15-1976 Crimping of wire splices and wires

Professional Standard - Machinery

JB/T 9562-1999 Voltage Relay and Voltage Protection Equipment
JB/T 5357-2002 Test guide for voltage transformers test
JB/T 8996-1999 Guide to the Selection of High-voltage Cables
JB/T 6234-1992 Stamping process guidelines for stamping parts of electric tools
JB/T 10738-2007 Semi-conductive shielding compound for power cables of rated voltages up to and including 35kV
JB/T 501-1991 Guidelines for Testing Power Transformers
JB/T 501-2006 Test guide for power transformers
JB/T 8996-2014 Guide to the Selection of High-voltage Cables
JB/T 7063-1993 Rated Voltage and Current of Power Semiconductor Devices

未注明发布机构

NB/T 31055-2014 The theory of wind farm capacity and abandon the wind power assessment guideline

Professional Standard - Energy

DL/T 2323-2021 Guide for insulation technical supervision of high voltage electric equipment of thermal power plant
NB/T 20718-2024 Maintenance and Overhaul Guidelines for Explosion Valves Used in Nuclear Power Plants
NB/T 20583-2021 Technical guideline for loss of control power test of PWR nuclear power plants
NB/T 11072-2023 Guide to the interpretation of test voltage measuring systems
NB/T 10932-2022 Guidelines of motor operation maintenence and overhaul test for nuclear power plant
NB/T 25103-2019 Guideline for commissioning generator cooling system of nuclear power plant（PWR）
NB/T 25045-2015 Performance assessment and management guideline of fire protection features for nuclear power plant
NB/T 32013-2013 Testing Code for Voltage and Frequency Response of Photovoltaic Power Station
NB/T 20469-2023 Technical Guidelines for Testing of Pressurized Water Reactor Nuclear Power Plants Loss of Off-site Power Supply
DL/T 2324-2021 Technical guide for partial discharge live test of high voltage cables using high frequency current method
NB/T 31045-2013 Guide for Wind Farm Operation Index and Evaluation
NB/T 20692-2023 Guidelines for the establishment and application of maintenance rules for nuclear power plants
NB/T 31055-2022 Guide on wind farm theoretical energy production andwind energy curtailment evaluation

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 17468-2019 Guide for choice power transformers
GB/T 40427-2021 Technical guidelines for power system voltage and reactive power
GB/T 24847-2021 Technical guide on 1000kV AC system voltage and reactive power
GB/T 41141-2021 Guide for risk assessment of HV submarine cable
GB/T 40615-2021 Guides of power system voltage stability evaluation

Professional Standard - Nuclear Industry

EJ/T 1167-2004 PWR fuel assembly metallographic examination for resistance spot weld of guide thimble to grid
EJ/T 1167-2018 Metallographic examination of resistance spot weld of guide thimble to grid for pressurized water reactor fuel assembly

Professional Standard - Electron

SJ 50597/23-1994 Semiconductor integrated circuits-Detail specification for type JJ710 voltage comparator
SJ/T 11127-1997 Overvoltage protection for photovoltaic(PV)power generating systems.Guide
SJ/T 11743.3-2019 Piezoelectric and dielectric devices for frequency control and selection Terminology Part 3: Piezoelectric and dielectric oscillators
SJ/T 11743.2-2019 Piezoelectric and dielectric devices for frequency control and selection Terminology Part 2: Piezoelectric and dielectric filters
SJ/T 11743.1-2019 Piezoelectric and dielectric devices for frequency control and selection Terminology Part 1: Piezoelectric and dielectric resonators
SJ/T 10623-1995 Series of filament voltage and heater voltage for electron tubes

工业和信息化部

SJ/T 10805-2018 Semiconductor integrated circuits Measuring methods for voltage comparators
JB/T 501-2021 Test guide for power transformers
YD/T 3554-2019 Technical requirements for protective measures against electromagnetic disturbances when internet data centre is co-sited with high-voltage substation

国家能源局

NB/T 20469-2017 Technical Guideline for loss offsite power test of PWR nuclear power plant
NB/T 33029-2018 Technical guide for synergistic dispatch of electric vehicles charging with intermittent power integrated
NB/T 42154-2018 Guide to the interpretation of high-voltage/low-voltage prefabricated substation

Military Standard of the People's Republic of China-General Armament Department

GJB 9240-2017 Specification for electro-hydraulic steering gear for anti-aircraft missiles
GJB 597/2A-1994 Detailed specifications for semiconductor integrated circuit CMOS AND gates and NAND gates
GJB 9793-2020 Specification for surface-coated core-shell powders for conductive and electromagnetic shielding purposes
GJB 597/3-1990 Detailed specification for voltage comparators for semiconductor integrated circuits
GJB 10248-2021 Electrical interface requirements for air defense and anti-missile missiles and launch control systems

Hubei Provincial Standard of the People's Republic of China

DB4201/T 538-2018 Guidelines for power configuration and electrical operation in important event venues

Professional Standard - Railway

TB 1126-1999 Standard Voltage for Locomotive Control and Light Circuit

Professional Standard - Aerospace

QJ 940-1985 Types and Dimensions for Two-way Pilot-operated Type Electric Check Valve
QJ 3297-2008 General Specification for Distributors of Missle and Launch Vehicle
QJ 3092-1999 Detailed Specifications for Semiconductor Integrated Circuit HCT or Gate or Not Gate

Professional Standard - Hydroelectric Power

SD 325-1989 Guideline of power system voltage and reactive power technology

Taiwan Provincial Standard of the People's Republic of China

CNS 11794-1986 Minimum Length Between the Cable Entrances and the Terminals of Electric Machinery and Equipment for Marine Use
CNS 11816-1987 Markings and Arrangements of Mainconnections and Small-Wiring for Marine Use

Professional Standard - Textile

FZ/T 63041-2018 Polyethylene and conductive wire twisted wire rope

ZA-SANS

PIESA 1020-2004 Electricity distribution - Cable ties for use with low-voltage aerial bundled conductors
NRS 020-2002 Electricity distribution - Cable ties for use with low voltage aerial bundled conductors
SANS 1713:2004 Electric cables - Medium-voltage aerial bundled conductors for voltages from 3,8/6,6 kV to 19/33 kV
SANS 6101:2007 Adherence of dielectric to conductor of supporting cores of aerial bundled conductors

HU-MSZT

MNOSZ 9249-1956 Voltage guide channel
MSZ 1174-1958 Voltage requirements for non-conductive aluminum tubes, 750v

PL-PKN

PN E06400-03-1991 Equiptnent for overhead lines and substations Equipment for high voltage substations with pipe conductors

RU-GOST R

GOST 18986.3-1973 Semiconductor diodes. Method of measuring of direct forward voltage and direct forward current
GOST 20214-1974 Electrical conductive plastics. Test method for determination of specific volume electrical resistance at d.c. voltage
GOST 29210-1991 Semiconductor devices. Discrete devices. Part 3. Signal (including switching) and regulator diodes
GOST 18986.13-1974 Semiconductor tunnel diodes. Methods for measuring peak point current, valley point current, peak point voltage, valley point voltage, projected peak point voltage
GOST 18986.15-1975 Reference diodes. Method of measuring stabilization voltage
GOST 25024.3-1983 Signal produce displays. Measuring methods of current and voltage
GOST 8.429-1981 State system for ensuring the uniformity of measurements. Electronic analogue pulse voltmeters. Methods and means for verification
GOST 8.402-1980 State system for ensuring the uniformity of measurements. Direct current electronic analogue voltmeters. Methods and means of calibration

CN-STDBOOK

图书 3-9846 Understanding and Implementation of GB/T 35710-2017 "Guidelines for Capacity Evaluation of Power Transformers with Voltage Levels 35kV and Below"

IET - Institution of Engineering and Technology

ELECTRO WAVGUD-1991 Electromagnetic Waveguides: theory and applications
INTRO ELECTRO WARF MDL SIMUL-2006 Introduction to Electronic Warfare Modeling and Simulation

Association Francaise de Normalisation

NF C32-018:1993 Conductors for wires and cables with small cross-sectional areas
NF L53-410*NF EN 2242:2012 Aerospace series - Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
NF UTE C15-106:2003 Low-voltage and high-voltage electrical installations - Practical guide - Sections of protective conductors, earthing conductors and equipotential bonding conductors
NF C31-888-4*NF EN 61788-4:2016 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
NF C32-080-2*NF EN 50565-2:2014 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2 : specific guidance related to EN 50525 cable types
NF C18-405:1996 Conductive clothing for live working at a nominal voltage up to 800 kV a.c.
NF C32-081:1993 Insulated cables and flexible cords for installations. Identification and use of cores of flexible cables.
NF C53-225:1985 Testing of semiconductor valves for high-voltage D.C. Power transmission.
NF EN 62237:2005 Travaux sous tension - Conduits flexibles isolants avec raccords utilisés avec les outils et matériels hydrauliques

British Standards Institution (BSI)

BS 7870-3.40:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors
BS 7870-3.40:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors
BS 7870-3.21:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split concentric cables with copper or aluminium conductors
BS 7870-3.20:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors
BS 7870-3.21:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors
BS 5655-9:1985 Lifts and service lifts - Specification for guide rails
BS 7870-1:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. General
BS 7870-1:1996 LV and MV polymeric insulated cables for use by distribution and generation utilities - General
BS EN 61788-4:2016 Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
BS EN 50565-2:2014 Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U). Specific guidance related to EN 50525 cable types
BS EN 2242:2012 Aerospace series. Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
BS 7870-3.10:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium condu
BS 7870-3.11:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conduc
BS 2562:1979 Specification for cable boxes for transformers and reactors
BS 7870-3.11:2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium cond
BS 3288-1:1997 Insulator and conductor fittings for overhead power lines - Performance and general requirements
BS 7808:1995 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
BS EN 60895:2003 Live working - Conductive clothing for use at a nominal voltage up to 800 kV a.c. and <+OR-> 600 kV d.c
BS 3288-1:2014 Insulator and conductor fittings for overhead power lines. Performance and general requirements
24/30438356 DC BS EN IEC 61851-21-1 Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply
DD CLC/TS 50457-2:2008 Conductive charging for electric vehicles. Communication protocol between off-board charger and electric vehicle
BS 1432:1987(2000) Specification for Copper for electrical purposes : high conductivity copper rectangular conductors with drawn or rolled edges
BS DD IEC/TS 61251:2008 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction

SE-SIS

SIS SS 424 02 69-1990 House wiring cables and flexible cords — Single conductor cable for luminaires with tubular discharge lamps of non-preheated types supplied by high frequency voltage
SIS SS IEC 700:1984 Power electronics — Semiconductor valves for high-voltage d.c. power transmission — Testing
SIS SS IEC 895:1989 Equipment for live working — Conductive clothing for live working at nominal voltage up to 800 kV a.c.

YU-JUS

JUS N.C0.048-1985 Electrical power and lighting. Testing of insulated conductors and cables. Separability of cores of flat twin insulated conductors
JUS IEC 905:1992 Power transformers. Loading guide for dry-type power transformers
JUS N.H1.014-1985 Power transformers. Tappings and connections

AR-IRAM

IRAM 2069-1948 Non-conductivity test at breaking voltage
IRAM 2104-1950 Transformers for current conduction and shunting and regulating transformers

BR-ABNT

ABNT PB-99-1979 Pole and Platform Distribution Transformers

Korean Agency for Technology and Standards (KATS)

KS C IEC 60183:2013 Guide to the selection of high-voltage cables
KS C IEC 60183:2004 Guide to the selection of high-voltage cables
KS C IEC 61173-2002(2012) Overvoltage protection for photovoltaic(PV) power generating systems－Guide
KS C IEC 60895:2015 Live working — Conductive clothing for use at nominal voltage up to 800 kV AC and ±600 kV DC
KS C IEC 60076-12-2013(2018) Power transformers－Part 12：Loading guide for dry-type power transformers
KS C IEC 60905-2002(2012) Loading guide for dry－type power transformer
KS C IEC 60905:2002 Loading guide for dry-type power transformer
KS C IEC 60905:2013 Loading guide for dry－type power transformer
KS C IEC 60076-7-2008(2018) Power transformers－Part 7：Loading guide for oil-immersed power transformers
KS C 0272-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASURMENT TECHNIQUES-VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TEST
KS R IEC 61851-21-2:2019 Electric vehicle conductive charging system — Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply — EMC requirements for off-board electric vehicle charging systems
KS C IEC 60895:2003 Conductive clothing for live working at a nominal voltage up to 800 kV a.c.
KS C IEC 61788-16:2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
KS C IEC 60895-2015(2020) Live working — Conductive clothing for use at nominal voltage up to 800 kV AC and ±600 kV DC
KS V IEC 62065:2006 Maritime navigation and radiocommunication equipment and systems－ Track control systems－Operational and performance requirements,methods of testing and required test results
KS C 0243-2001 Environmental testing Part 2：Tests－Test Ec： Drop and topple, primarily for equipment－type specimens

GSO

DL/T 401-1991 Guidelines for the selection of high voltage cables
DL/T 511-1993 Guidelines for classification and coding of spare parts for power station equipment
GSO 1647:2002 Methods of testing and verification for Clinical electrical thermometers with maximum device

Society of Automotive Engineers (SAE)

SAE AMS3397-2002 Ignition-Cable, High Tension Copper Conductor, Low Capacitance
SAE AMS3392-2002 IGNITION CABLE, HIGH TENSION Copper Conductor
SAE AMS3390-2002 Ignition-Cable, High Tension Copper Conductor

Indonesia Standards

SNI 04-6271-2000 Test methods for power cables with extruded insulation for rated voltage above 30 kV (Um=36 kV) up to 150 kV (Um=170 kV)
SNI 05-3047-1992 Conveyor belts, Specification and electric conductivity
SNI 04-3855-1995 Earthing for low voltage network and low voltage installation
SNI 04-3580-1994 Requirements of copper and alumunium conductor for electric cable insulation
SNI IEC 60076-7:2009 Power transformers - Part 7: Loading guide for oil-immersed power transformers

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Collection 2022 IEEE Power, Distribution & Regulating Transformers
IEEE 82-2002 Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
IEEE 82-1994 Test procedure for impulse voltage tests on insulated conductors
ANSI/IEEE Std 404-1986 IEEE Standard for Cable Joints for Use with Extruded Dielectric Cable Rated 5000 V through 46 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2500 V Through 500 000 V

BE-NBN

NBN C 32-001-1992 Instructions for using unified low voltage cables
NBN C 32-131-1987 Installation of insulated wires and cables, rubber insulated cables and conductors, specified for voltages between 450/750 V
NBN C 32-131-1983 Installation of insulated wires and cables, rubber insulated cables and conductors, nominal voltage between 450/750 V
NBN C 32-123-1976 Insulated cables for conductors and conductive equipment, polyvinyl chloride insulated cables with a rated voltage of 450/750 V or less
NBN C 32-131-1976 Installation of insulated wires and cables, rubber insulated cables and conductors, nominal voltage Uo/U between 450/750 V
NBN C 32-131 ADD 1-1978 Installation of insulated wires and cables, rubber insulated cables and conductors, nominal voltage Uo/U between 450/750 V
NBN C 32-123 ADD 1-1988 Installation insulated wires and cables, polyvinyl chloride insulated cables and conductors, nominal voltage between 450/750 V
NBN C 32-123-1987 Installation insulated wires and cables, polyvinyl chloride insulated cables and conductors, nominal voltage between 450/750 V
NBN C 32-131 ERRATUM-1976 Installation of insulated wires and cables, rubber insulated cables and conductors, nominal voltage Uo/U between 450/750 V
NBN C 32-123-1984 Installation insulated wires and cables, polyvinyl chloride insulated cables and conductors, nominal voltage between 450/750 V
NBN C 32-124 ADD 9-1997 Installation insulated wires and cables, rubber insulated cables and conductors, nominal voltage Uo/U between 600/1000 V
NBN C 32-123-1983 Installation insulated wires and cables, polyvinyl chloride insulated cables and conductors, nominal voltage between 450/750 V

Danish Standards Foundation

DS/IEC 606:1979 Application guide for power transformers
DS/EN 2242:2012 Aerospace series - Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
DS/IEC 895:1990 Conductive clothing for live working at a nominal voltage up to 800 kV a.c.
DS/ENV 50275-2-1:2005 Conductive charging for electric vehicles -- Part 2-1: Connection of an electric vehicle to an a.c./d.c. supply

SCC

MIL MIL-T-47326-1990 TAPE, PRESSURE-SENSITIVE ADHESIVE, ALUMINUM-BACKED, ELECTRICALLY CONDUCTIVE
12/30256211 DC BS EN 50565-2. Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. Specific guidance related to EN 50525 cable types
DANSK DS/EN 61851-21:2002 Electric vehicle conductive charging system – Part 21: Electric vehicles requirements for conductive connection to an A.C./D.C. supply
CEI EN 61851-21:2003 Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply
DANSK DS/CLC/TS 50549-2:2015 Requirements for generating plants to be connected in parallel with distribution networks – Part 2: Connection to a MV distribution network
CSA C22.2 No.241-1997(R2005) IEEE Standard for Cable Joints for Use With Extruded Dielectric Cable Rated 5000-138 000 V and Cable Joints for Use With Laminated Dielectric Cable Rated 2500-500 000 V.
IEC 60227:1967/AMD2:1973 Amendment 2 - Polyvinyl chloride insulated flexibles cables and cord with circular conductors and a rated voltage not exceeding 750 V conductors and rated voltage not exceeding 750 V
CEI EN 61851-21-1:2018 Electric vehicle conductive charging system Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply
AENOR UNE 20058:1970 Prefabricated electrical conduits, for low voltage. Elements and accessories.
CEI CLC/TS 50549-2:2015 Requirements for the connection of a generating plant to a distribution system Part 2: Connection to a MV distribution system
BS EN 60895:1997 Conductive clothing for live working at a nominal voltage up to 800 kV a.c.
BS 1432:1987 Specification for copper for electrical purposes: high conductivity copper rectangular conductors with drawn or rolled edges
CAN/CSA-C22.2 No.241-M91-1991 IEEE Standard for Cable Joints for Use with Extruded Dielectric Cable Rated 5000 V Through 46 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2500 V Through 500 000 v
DIN CLC/TS 50549-2 E:2014 Draft Document - Requirements for the connection of a generating plant to a distribution system - Part 2: Connection to a MV distribution system; German version CLC/FprTS 50549-2:2014

Standard Association of Australia （SAA）

AS 2374.8:2000 Power transformers - Application guide
AS 2374.7:1997 Power transformers - Loading guide for oil-immersed power transformers
AS 3953:1996 Loading guide for dry-type power transformers

German Institute for Standardization

DIN 46211:1965-03 Stamped Cable Sockets for Copper Conductors
DIN 41745:1971 Stabilized power supplies; terms and definitions
DIN IEC 60483:1988 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling; identical with IEC 60483, edition 1976
DIN EN 60895:2004 Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ˝ 600 kV d.c. (IEC 60895:2002 + Corrigendum 2003, modified); German version EN 60895:2003
DIN 46211:1965 Stamped Cable Sockets for Copper Conductors
DIN 49019-1:1972 Conduits for electrical installation; flexible plain and non inflammable conduits of insulating material for middle and light pressure load

International Organization for Standardization (ISO)

ISO/FDIS 4789 Guidelines for wastewater treatment and reuse in thermal power plants
ISO 4789 Guidelines for wastewater treatment and reuse in thermal power plants
ISO 18095:2018 Condition monitoring and diagnostics of power transformers

International Electrotechnical Commission (IEC)

IEC TR3 60827:1985 Supporting and explanatory guide to voltage fluctuations limits for household appliances
IEC 60895:2002 Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ˝600 kV d.c.
IEC TS 61251:2008 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
IEC 60700:1981 Testing of semiconductor valves for high-voltage d.c. power transmission
IEC 60895:2002/COR1:2003 Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ˝600 kV d.c.
IEC 60354:1991 Loading guide for oil-immersed power transformers

US-FCR

FCR VA 26 05 21-2010 LOW-VOLTAGE ELECTRICAL POWER CONDUCTORS AND CABLES (600 VOLTS AND BELOW)

CN-QIYE

Q/GDW 286-2009 1000kV System Voltage and Reactive Power Technical Guidelines
Q/GDW 457-2010 Guidelines for Condition Maintenance of Electromagnetic Voltage Transformer
Q/GDW 458-2010 Guidelines for state evaluation of electromagnetic voltage transformers
Q/GDW125-2005 Technical Guidelines for Construction and Transformation of County Power Grids
Q/GDW 125-2005 Technical guidelines for county power grid construction and renovation
Q/GDW 459-2010 Guidelines for Condition Maintenance of Capacitive Voltage Transformers and Coupling Capacitors
Q/GDW 193-2008 Guidelines for Construction Technology of 1000kV Power Transformer and Oil-immersed Reactor

CZ-CSN

CSN 35 8733-1975 Semiconductor devices. Diodes. Measurement of reverse voltago (working voltago)
CSN 34 7659-5F ZZ1-2000 Cable distribution system rated voltage 0.6/1 kV, 5F: Cable shield with concentric small non-isolated conductors (type 5F)
CSN 34 7171-1965 Breakdown voltage test. Wires. Conductors for winding
CSN 35 8735-1964 Semiconductor diodes. Measurement of d. c. currents and voltages
CSN 34 7470-9 Z1-1999 Rubber cables and wires. Rated voltage is within 450/750 volts. Part 9: Single conductors with fixed connections and low emissions of smoke and corrosive gases
CSN 35 8760-1973 Seraiconductors. Stabilizing diodes. Measurement of voltage temperature coefficient
CSN 35 1106-1984 Loading guide for oil-immersed power transformers

Lithuanian Standards Office

LST EN 2242-2012 Aerospace series - Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
LST EN 50565-2-2014 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2: Specific guidance related to EN 50525 cable types

NL-NEN

NPR 10905-1992 Power transformers. Loading guide for dry-type transformers (IEC 905:1987)
NEN 2764-1983 Power transformers Tappings and connections

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C57.120-2017 Guide for Loss Evaluation of Distribution and Power Transformers and Reactors
IEEE 1050 INT 1-2001 Guide for Instrumentation and Control Equipment Grounding in Generating Stations
IEEE C37.10-1995 Guide for Diagnostics and Failure Investigation of Power Circuit Breakers
IEEE 1727-2013 Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage
IEEE 1050-1989 GUIDE FOR INSTRUMENTATION AND CONTROL EQUIPMENT GROUNDING IN GENERATING STATIONS
IEEE 1727 CORR-2015 Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage Corrigendum 1
IEEE C37.245-2018 Guide for the Application of Protective Relaying for Phase-Shifting Transformers

IN-BIS

IS 13771-1993 Conductive Clothing for Live Working at a Nominal Voltage Up to 800 kV AC

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0298-565-2-2015 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U ₀ /U) - Part 2: Specific guidance related to EN 50525 cable types; German version EN 50565-2:2014
VDE V 0435-6-2014 Requirements for the connection of a generating plant to a distribution system - Part 2: Connection to a MV distribution system; German version CLC/FprTS 50549-2:2014
VDE V 0124-549-2-2016 Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network; German version CLC/TS 50549-2:2015

CENELEC - European Committee for Electrotechnical Standardization

EN 60895:1996 Conductive Clothing for Live Working at a Nominal Voltage Up to 800 kV a.c.

Aerospace Industries Association

AIA NAS 4122-1996 Heat Sink, Electrical- Electronic Component, Semiconductor Devices, Extruded
AIA NAS 4119-1996 Heat Sink, Electrical- Electronic Component, Semiconductor Devices, Press-On Type

American National Standards Institute （ANSI)

ANSI C119.5-2009 Insulation Piercing Connector Systems, rated 600 volts or less (low voltage aerial bundled cables and insulated and non-insulated line wires)
ANSI C119.5-2018 Insulation Piercing Connector Systems, rated 600 volts or less (low voltage aerial bundled cables and insulated and non-insulated line wires)

AIA/NAS - Aerospace Industries Association of America Inc.

NAS4122-1996 Heat Sink@ Electrical- Electronic Component@ Semiconductor Devices@ Extruded
NAS4119-1996 Heat Sink@ Electrical- Electronic Component@ Semiconductor Devices@ Press-On Type

KR-KS

KS R IEC 61851-21-2-2019 Electric vehicle conductive charging system — Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply — EMC requirements for off-board electric vehicle charging systems
KS C IEC 61788-16-2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies

National Electrical Manufacturers Association（NEMA)

NEMA C119.5-2009 Electric Connectors- Insulation Piercing Connector Systems, Rated 600 Volts or Less (Low-Voltage Aerial Bundled Cables and Insulated and Non-Insulated Line Wires)

CO-ICONTEC

ICONTEC 2166-1986 Electronics. Overvoltage load reducer (lightning rod or conductor)

GOSTR

GOST 34695.21-2-2020 Electric vehicle conductive charging system. Part 21-2. Requirements for conductive connection to an AC/DC supply. EMC requirements for off board charging systems

IX-SA

AS 607:1972 Hydraulic electronic computing and data processing

Defense Logistics Agency

DLA MIL-DTL-13486/13 D-2010 CABLE, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, MULTIPLE CONDUCTORS, SHIELDED
DLA MIL-DTL-13486/2 D-2010 CABLE, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, SINGLE CONDUCTOR, SHIELDED
DLA SMD-5962-97534 REV B-2001 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, QUADRUPLE 2-INPUT POSITIVE-AND GATE, MONOLITHIC SILICON
DLA SMD-5962-97533 REV C-2003 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, QUADRUPLE 2-INPUT POSITIVE NAND GATE, MONOLITHIC SILICON
DLA MIL-DTL-13486/10 C-2010 CABLE, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, MULTIPLE CONDUCTORS, UNSHIELDED
DLA MIL-DTL-13486/12 C-2010 CABLE, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, MULTIPLE CONDUCTORS, UNSHIELDED
DLA MIL-DTL-13486/9 C-2010 CABLE, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, MULTIPLE CONDUCTORS, UNSHIELDED
DLA MIL-DTL-13486/15 C-2010 CABLE, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, SINGLE CONDUCTOR, UNSHIELDED
DLA MIL-DTL-13486/1 D-2010 CABLE, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, SINGLE CONDUCTOR, UNSHIELDED
DLA MIL-DTL-13486/5 C-2010 CABLE, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION, HEAVY-DUTY, MULTIPLE CONDUCTORS, UNSHIELDED

TR-TSE

TS 3215-1978 Loading Guide For Oil-Immersed Transformers

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 4122-1996 Heat Sink, Electrical- Electronic Component, Semiconductor Devices, Extruded
AIA/NAS NAS 4119-1996 Heat Sink, Electrical- Electronic Component, Semiconductor Devices, Press-On Type

European Committee for Electrotechnical Standardization（CENELEC）

EN 61173:1994 Overvoltage Protection for Photovoltaic (PV) Power Generating Systems - Guide

(U.S.) Ford Automotive Standards

FORD WSA-M1L130-A-2003 CABLE, LOW TENSION, CROSSLINKED ETFE INSULATED, TINNED SINGLE AND MULTIPLE CONDUCTOR ***TO BE USED WITH FORD WSS-M99P1111-A***

Malaysia Standards

MS 1540-2002 Specification for materials, markings and dimensions for crimp-type cable lugs for use with copper conductors in low-voltage applications