gb plastic

gb plastic, Total:343 items.

The international standard classification for "gb plastic" includes: Thermoplastic materials , Films and sheets , Plastics in general , Rubber and plastics products in general , Environmental management , Thermosetting materials , Barrels. Drums. Canisters , Cellular materials , Central heating systems , Plastics pipes, fittings and valves , Drainage systems , Packaging machinery , Rubber and plastics products , Reinforced plastics , Domestic safety , Safety of machinery , Other rubber and plastics products , Cables , Postal services , Adhesives , Binders. Sealing materials , Plastics , Plastics pipes , Nuclear energy engineering , Equipment for the chemical industry , Moulding equipment , Stationary containers and tanks , Aliphatic hydrocarbons , Protection against dangerous goods , Doors and windows , General purpose pallets , Electrical engineering in general , Filters, seals and contamination of fluids , Furniture , Plastics and rubber insulating materials , Bolts, screws, studs , food products in general , Raw materials for rubber and plastics in general , Integrated Services Digital Network(ISDN) , Animal feeding stuffs , Tool steels , Quality management and quality assurance , Steels pipes and tubes for specific use , Industrial automation systems , Packaging and distribution of goods in general , Rubber compounding ingredients .

The Chinese standard classification for "gb plastic" includes: Synthetic resin and plastic , Plastic profile , Basic standards and general methods for synthetic resin and plastic , Daily use plastic products , Basic standards and general methods , Processing technology in general , Outdoor water supply and draining engineering , Storage equipment and handling machinery , Hygiene, safety and labor protection , Cable and its accessory , Postal packaging , Basic standards and general methods for adhesives , Plastic components and accessorie , Nuclear detector , Machinery for rubber and plastic , Basic standards and general methods , Mould , Pressure vessel , Electrical insulating material and its products , Marking, packaging, transport and storage in general , Container, tray and pallet , Hydraulic and pneumatic device , Furniture in general , Synthetic materials in general , Other light industry machinery , Fastener , Standardization and quality management , Fibre reinforced composites , General and microsurgical devices , Standardization, quality management , Non-metal chemical machinery equipment , Steel sheet and strip , Standardization and Quality Management , Steel tube and cast iron pipe , Packaging material and container .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41003.2-2021 General technical specification for plastic foam mats—Part 2: Indoor polyvinyl chloride foam mats
GB/T 10457-2021 General requirement of plastic self-cling wrap film for keeping food fresh
GB/T 16422.4-2022 Plastics—Methods of exposure to laboratory light sources—Part 4: Open-flame carbon-arc lamps
GB/T 40402-2021 Pre-insulated composite plastic pipes with polyethylene casing
GB/T 37194.1-2018 Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 1:Designation system and basis for specifications
GB/T 22271.2-2021 Plastics—Polyoxymethylene(POM) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 39714.1-2020 Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 1:Requirements and designation
GB/T 39818-2021 Plastics—Thermosetting moulding materials—Determination of shrinkage
GB/T 40553-2021 Plastics—Specifications for plastics suitable for home composting
GB/T 41220-2021 Laminated lidding film for food packaging
GB/T 40006.7-2021 Plastics—Recycled plastics—Part 7: Polycarbonate(PC) materials
GB/T 39715.1-2021 Plastics—Biobased content—Part 1: General principles
GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
GB/T 41010-2021 Degradability and identification requirements of biodegradable plastics and products
GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test
GB/T 18743.2-2022 Thermoplastics pipes—Determination of pendulum impact strength by the Charpy method—Part 2: Test condition for pipes of various materials
GB/T 39822-2021 Plastics—Determination of yellowness index and change in yellowness index
GB/T 39328-2020 Additive manufacturing—Specification for material extrusion process of plastic materials
GB/T 39821-2021 Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel
GB/T 16422.2-2022 Plastics—Methods of exposure to laboratory light sources—Part 2: Xenon-arc lamps
GB/T 15593-2020 Plasticized poly(vinyl chloride) compounds for transfusion (infusion) equipment
GB/T 41345-2022 General technical requirements for compression mould for plastic closure
GB/T 1845.2-2021 Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 41666.3-2022 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks—Part 3:Lining with close-fit pipes
GB/T 17037.1-2019 Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens
GB/T 40911.2-2021 Plastics—Poly(methyl methacrylate)sheets—Types,dimensions and characteristics—Part 2:Extruded sheets
GB/T 39199-2020 Characterization and testing methods of recycled polyethylene (PE)
GB/T 18252-2020 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
GB/T 39110-2020 Consumer product—Plastics—Rapid screening of phthalates
GB/T 41488-2022 Plastics—Prepregs—Definitions of terms and symbols for designations
GB/T 39937-2021 Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods
GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
GB/T 16422.1-2019 Plastics -- Methods of exposure to laboratory light sources -- Part 1: General guidance
GB/T 40006.5-2021 Plastics—Recycled plastics—Part 5：Acrylonitrile-butadiene-styrene (ABS) materials
GB/T 39936-2021 Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods
GB/T 40006.6-2021 Plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
GB/T 37547-2019 Classification and code of waste plastics
GB/T 40266-2021 Quality general rules of oxides barrier transparent plastics laminated films and pouches for food packaging
GB/T 37199.1-2021 Plastics—Polybutene(PB) moulding and extrusion materials—Part 1：Designation system and basis for specifications
GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
GB/T 39289-2020 Determination of the adhesion strength—Plastic and metal
GB/T 41048-2021 Technical requirements for plastics inspection chamber and manhole for urban drainage
GB/T 39714.2-2020 Plastics—Polytetrafluoroethylene(PTFE)semi-finished products—Part 2:Preparation of test specimens and determination of properties
GB/T 18743.1-2022 Thermoplastics pipes—Determination of pendulum impact strength by the Charpy method—Part 1:General test method
GB/T 38082-2019 Biodegradable plastic shopping bags
GB/T 38727-2020 Biodegradable plastic films and bags for express logistics transportation and delivery
GB/T 16422.3-2022 Plastics—Methods of exposure to laboratory light sources—Part 3: Fluorescent UV lamps
GB/T 22271.1-2021 Plastics—Polyoxymethylene(POM) moulding and extrusion materials—Part 1:Designation system and basis for specification
GB/T 39997-2021 Thermoplastic pipework for underground installation at petrol filling stations
GB/T 39691-2020 Plastics—Determination of refractive index
GB/T 40006.2-2021 Plastics—Recycled plastics—Part 2:Polyethylene(PE) materials
GB/T 24451-2020 Low resilience flexible polyurethane cellular plastics
GB/T 3681.1-2021 Plastics—Methods of exposure to solar radiation—Part 1: General guidance
GB/T 40006.1-2021 Plastics—Recycled plastic—Part 1:General rules
GB/T 20674.1-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 1:Butt fusion
GB/T 40224-2021 Plastics boxes used for rainwater infiltration,attenuation and storage
GB/T 41378-2022 Plastics—Blow-moulded polypropylene containers for packaging of liquid food stuffs
GB/T 40006.3-2021 Plastics—Recycled plastics—Part 3:Polypropylene(PP) materials
GB/T 41501-2022 Fibre-reinforced plastic composites—Determination of interlaminar strength and modulus by double beam shear test
GB/T 39395-2020 Test method for buckling resistance of the thermoplastics inspection chamber bases
GB/T 38725.1-2022 Spoolable reinforced plastic pipe—Part 1: General
GB/T 40937-2021 Plastic piping systems—Determination of long-term strength for plastic composite pipes and fittings
GB/T 40006.8-2021 Plastics—Recycled plastics—Part 8: Polyamide (PA) materials
GB/T 35081-2018 Safety of machinery—Relationship of GB/T 16855.1 to GB/T 15706
GB/T 9330-2020 Plastic insulated control cables
GB/T 40006.9-2021 Plastics—Recycled plastics—Part 9:Poly(ethylene terephthalate) (PET) materials
GB/T 40916-2021 High strength polyurethane foam for storage and transport of liquefied gas
GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials
GB/T 41168-2021 Plastics and aluminum foil laminated retort film and pouch for food packaging
GB/T 21661-2020 Plastic shopping bags
GB/T 10801.1-2021 Moulded polystyrene foam for thermal insulation（EPS）

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materials - Part 1: General principles and moulding of multipurpose and bar test specimens
GB/T 2918-2018 Plastics--Standard atmospheres for conditioning and testing
GB/T 12555.12-1990 Injection mould for plastic large-size mould bases -Guide bushes with head
GB/T 4169.21-2006 Components of injection moulds for plastics - Part 21: Rectangular locating element
GB/T 1636-2008 Plastics - Determination of apparent density material that can be poured from a specified funnel
GB/T 11547-1989 Plastics-Determination of the effects of liquid chemicals,including water
GB/T 4169.1-2006 Components of injection moulds for plastics - Part 1: Ejector pin
GB/T 28897-2012 Steel pipes of complex plastic
GB/T 4169.4-2006 Components of injection moulds for plastics - Part 4: Headed guide pillar
GB 10457-2009 Plastic cling wrap film for keeping fresh of food
GB/T 6671-2001 Thermoplastics pipes - Determination of longitudinal reversion
GB/T 9330.1-2008 Plastic Insulated Control Cables - Part 1: General Requirements
GB/T 9647-2003 Thermoplastics pipes--Determination of ring stiffness
GB/T 14486-2008 Dimensional tolerances for moulded plastic parts
GB/T 15568-2008 Sheet molding compound(SMC) for general purposes
GB 28481-2012 Limit of harmful substances of plastic furniture
GB/T 4169.22-2006 Components of injection moulds for plastics - Part 22: Round mould opening delayer
GB/T 1404.1-2008 Plastics - Phenolic powder moulding compounds - Part 1: Designation system and basis for specifications
GB/T 4169.11-2006 Components of injection moulds for plastics - Part 11: Round locating element
GB/T 4169.14-2006 Components of injection moulds for plastics - Part 14: Ejector guide pillar
GB/T 22314-2008 Plastics - Epoxide resins - Determination of viscosity
GB/T 1842-2008 Plastics - Test method for environmental stress-cracking of polyethylene
GB/T 13578-2010 Rubber and plastics calendar
GB/T 23241-2009 Plastics pipes and fittings used for irrigation basic parameters and technical requirements
GB/T 8802-2001 Thermoplastics pipes and fitting - Determination of vicat softening temperature
GB/T 8324-2008 Plastics - Determination of bulk factor of moulding materials
GB/T 41929-2022 Plastics—Epoxy resins—Test methods
GB/T 28206-2011 Specification for compostable plastic
GB/T 16420-1996 Plastics-Determination of impact properties by use of small specimens
GB/T 14485-1993 STANDARD methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball(falling ball)
GB/T 15047-1994 Test method for stiffness proporties in torsion of plastics
GB/T 9647-2015 Thermoplastics pipes―Determination of ring stiffness
GB/T 11546.1-2008 Plastic - Determination of creep behaviour - Part 1: Tensile creep
GB/T 12555.9-1990 Injection mould for plastic large-size mould bases -Guide pillars with shoulder
GB/T 14572-1993 Rules for inspecting, marking, packing, storing and transporting of thermoplastic materials
GB/T 17037.3-2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
GB/T 12555-2006 Injection mould bases for plastics
GB/T 1033.2-2010 Plastics—Methods for determining the density of non-cellular plastics—Part 2:Density gradient column method
GB/T 1043.1-2008 Plastics - Determination of charpy impact properties - Part 1: Non - instrumented impact test
GB/T 24454-2009 Plastic refuse sack
GB/T 13454.2-2013 Plastics―Melamine-formaldehyde powder moulding compounds(MF-PMCs)―Part 2:Preparation of test specimens and determination of properties
GB/T 5470-1985 Test method for brittleness temperature of plastics by impact
GB/T 4169.23-2006 Components of injection moulds for plastics - Part 23: Rectangular mould opening delayer
GB/T 29645-2013 Plastics—Recycled polystyrene compound
GB/T 16577-2010 Plastics - Tetrahydroxy polyether polyols
GB/T 15065-2009 Black polyethylene compounds for wire and cable
GB/T 7141-1992 Plastics-Methods of exposure to thermal air
GB/T 3807-1994 Polyvinyl chloride cellular plastic slippers
GB/T 13022-1991 Plastics--Determination of tensile properties of films
GB/T 18964.1-2008 Plastics － Impact - Resistant Polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications
GB/T 1844.3-2008 Plastics - Symbols and abbrebiated terms - Part 3: Plasticizers
GB/T 1630.1-2008 Plastics - Epoxy resins - Part 1: Designation
GB/T 4169.12-2006 Components of injection moulds for plastics - Part 12: Ejector guide bush
GB/T 5471-2008 Plastics - Compression moulding of test specimens of thermosetting materials
GB/T 12555.8-1990 Injection mould for plastic large-size mould bases -Guide pillars with head
GB/T 41873-2022 Plastics—Polyetheretherketone(PEEK) resin
GB/T 41638.2-2023 Plastics—Carbon and environmental footprint of biobased plastics—Part 2:Material carbon footprint—Amount (mass) of CO2 removed from the air and incorporated into polymer molecule
GB/T 5478-2008 Plastics - Test method for wear by rolling
GB/T 8806-2008 Plastics piping systems - Plastics components - Determination of dimensions
GB/T 30102-2013 Plastics - Guidelines for the Recovery and Recycling of Plastics Waste
GB/T 29646-2013 Modified biodegradable polyester used for blown film
GB/T 19470-2004 Geosythetic - Plastic geonet
GB/T 12010.5-2010 Plastic—Poly(vinyl alcohol) (PVAL) materials—Part 5:Determination for average polymerization degree
GB/T 8807-1988 Test method for specular gloss of plastics
GB/T 12010.8-2010 Plastic—Poly (vinyl alcohol)(PVAL) materials—Part 8:Determination for transparency
GB/T 11793.2-1989 Technical requirements on mechanical and weathering properties for PVC windows
GB/T 4169.5-2006 Components of injection moulds for plastics - Part 5: Shouldered guide pillar
GB/T 12001.2-2008 Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 2: Preparation of test specimens and determination of properties
GB/T 2547-2008 Plastic resins - Sampling
GB/T 19467.1-2004 Plastics - Acquisition and presentation of comparable single-point data - Part 1:Moulding materials
GB/T 12555.6-1990 Injection mould for plastic large-size mould bases -Ejector plates
GB/T 1843-2008 Plastics - Determination of izod impact strength
GB/T 12000-2003 Ddtermination of the effects of exposure to damp heat,water spray and salt mist for plastics
GB/T 12001.1-2008 Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 1: Designation system and basis for specifications
GB/T 29640-2013 Plastics—Glass fiber reinforced poly(decamethylene terephthalamide)compound
GB/T 16419-1996 Plastics―Determination of flexural properties by use of small specimens
GB/T 41878-2022 Plastics—Determination of scratch properties
GB 1404-1995 Phenolic moulding materials
GB/T 32364-2015 Plastics—Phenolic resins—Determination of pH
GB/T 4169.20-2006 Components of injection moulds for plastics - Part 20: Limit pin
GB/T 23653-2009 Plastics - PVC resins for general use - Determination of hot plasticizer absorption
GB/T 29288-2012 General requirement for thermoformable rigid polyurethane cellular plastics
GB/T 24150-2009 Plastics—Flame retardant impact-resistant polystyrene compound
GB/T 4169.16-2006 Components of injection moulds for plastics - Part 16: Shouldered ejector pin
GB/T 18252-2008 Plastics piping and ducting systems - Determination of the long - term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
GB/T 4169.7-2006 Components of injection moulds for plastics - Part 7: Ejector plate
GB/T 30923-2014 Plastics―Polypropylene materials for meltblown
GB/T 30924.2-2014 Plastics—Ethylene-vinyl acetate(EVAC) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 16421-1996 Plastics―Determination of tensile propeties by use of small specimens
GB/T 41791-2022 Plastics—Film and sheeting—Non-oriented poly(ethylene terephthalate) (PET) sheets
GB/T 26501-2011 General technical specification for pressure vessels lined with fluoroplastics
GB/T 10802-2023 General flexible polyurethane cellular plastics
GB/T 41935-2022 Plastics—Artificial weathering including acidic deposition
GB/T 27797.10-2011 Fibre-reinforced plastics—Methods of producing test plates—Part 10:Injection moulding of BMC and other long-fibre moulding compounds—General principles and moulding of multipurpose test specimens
GB/T 41974.1-2022 Plastics—Color masterbatch—Part 1: Designation system and basis for specifications
GB/T 33061.11-2022 Plastics—Determination of dynamic mechanical properties—Part 11: Glass transition temperature
GB/T 15585-1995 Determination of shrinkage for injection moulding thermoplastics
GB/T 8804.1-2003 Thermoplastic pipes - Determination of tensile properties - Party 1: General test method
GB/T 20417.2-2006 Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
GB/Z 23738-2009 Guidance on the application of GB/T 22000-2006 in feed industry
GB/T 30402-2013 Plastic Brushes
GB/T 15597.2-2010 Plastics—Poly(methyl methacrylate)(PMMA)moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 3403.2-2013 Plastics―Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds(UF- and UF/MF-PMCs)―Part 2:Preparation of test specimens and determination of properties
GB/T 8809-2015 Pendulum impact resistance of plastic film
GB/T 12555.4-1990 Injection mould for plastic large-size mould bases--Mould plates
GB/T 12555.7-1990 Injection mould for plastic large-size mould bases -Spacer plates
GB/T 22236-2008 Testing of plastics—Size reduction of plastic products for test purposes
GB/T 24127-2009 Testing method for determining algal resistance of plastics
GB/T 19532-2004 Packaging materials - Volatile corrosion inhibiting film
GB/T 10801.1-2002 polystyrene foam board for thermal insulation
GB/T 1844.2-2022 Plastics—Symbols and abbreviated terms—Part 2: Fillers and reinforcing materials
GB/T 4169.18-2006 Components of injection moulds for plastics - Part 18: Locating ring
GB/T 24151-2009 Plastics—Glass fiber reinforced and flame retardant poly(butylenes terephthalate)compound
GB/T 1040.1-2006 Plastics - Determination of tensile properties - Part 1: General principles
GB/T 41874-2022 Plastics—Poly(phenylene ether) resin
GB/T 19080-2003 Guidielines on the application of GB/T 19001-2000 for the food and drink industry
GB/T 12554-1990 Specification of injection mould for plastics
GB/T 9341-2008 Plastics - Determination of flexural properties
GB/T 15597.1-2009 Plastics - Poly (methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications
GB/T 15234-1994 Plastics flat pallets
GB/T 41933-2022 Plastics—Determination of tension-tension fatigue crack propagation—Linear elastic fracture mechanics (LEFM) approach
GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading
GB/T 840-1988 Plastic diamond knurlhead screws
GB/T 41758.2-2022 Plastics—Polyketone (PK) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 11997-2008 Plastic - Multipurpose test specimens
GB/T 29365-2012 Wood-Plastic Composite (WPC)—Test methods of artificial weathering
GB/T 12010.7-2010 Plastics—Poly(vinyl alcohol) (PVAL) materials—Part 7:Determination for sodium hydroxide contents
GB/T 1043-1993 Plastics Determination of charpy impact strength of rigid materials
GB/T 15594-2010 Plastics—Octahydroxy polyether polyols
GB/T 5478-1985 Test method for wear of plastics by rolling
GB/T 9352-2008 Plastic - Compression moulding of test specimens of thermoplastic materials
GB/T 12010.6-2010 Plastic—Poly(vinyl alcohol) (PVAL) materials—Part 6:Determination for particle size
GB/T 4617-2009 Plastics—Phenolic mouldings—Determination of acetone-soluble matter
GB/T 30401-2013 Plastic Storage Container
GB/T 12555.1-1990 Injection mould for plastic large-size mould bases --Standard mould bases
GB/T 6594.2-2003 Plastics--Polystyren(PS) moulding and extrusion materials--Part 2:Preparation of test specimens and determination of properties
GB/T 5470-2008 Plastics - Determination of the brittleness temperature by impact
GB1404.3-2008 Plastics-Phenolic powder moulding compounds-Part 3:Requirements for selectes moulding compounds
GB/T 10004-2008 Plastic Laminated Films and Pouches for Packaging - Dry Lamination and Extrusion Lamination
GB/T 4169.17-2006 Components of injection moulds for plastics - Part 17: Ejector sleeve
GB/T 8946-2013 General technical requirements of plastic woven sack
GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
GB/T 41877.1-2022 Plastics—Ethylene-vinyl alcohol (EVOH) copolymer moulding and extrusion materials—Part 1：Designation system and basis for specifications
GB/T 20295-2006 Application of GB/T4728.12 and GB/T4728.13 standards
GB/T 2408-2008 Plastics - Determination of burning characteristics - Horizontal and vertical test
GB 1404.3-2008 Plastics - Phenolic powder moulding compounds - Part 3: Requirements for selectes moulding compounds
GB/T 3398-1982 Test for hardness of plastics by the ball indentation
GB/T 3403.1-2008 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds（UF-and UF/MF-PMCs）- Part 1: Designation system and basis for specifications
GB/T 2546.1-2022 Plastics—Polypropylene (PP) moulding and extrusion materials—Part 1:Designation system and basis for specifications
GB/T 20417.1-2008 Plastics － Acrylonitrile-butadiene-Styrene(ABS) moulding and extrusion materials － Part 1: Designation system and basis for specifications
GB/T 15597-1995 Polymethyl methacrylate (PMMA) moulding materials
GB/T 4169.15-2006 Components of injection moulds for plastics - Part 15: Flat ejector pin
GB/T 2407-2008 Plastics - Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
GB/T 1844.3-2022 Plastics—Symbols and abbreviated terms—Part 3:Plasticizers
GB/T 1033.1-2008 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method liquid pyknometer method and titration method
GB/T 41932-2022 Plastics—Determination of fracture toughness (GIC and KIC)—Linear elastic fracture mechanics (LEFM) approach
GB/T 13454.3-2013 Plastics―Melamine-formaldehyde powder moulding compounds(MF-PMCs)―Part 3:Requirements for selected moulding compounds
GB/T 27726-2011 Thermoplastics valves - Pressure test methods and requirements
GB/T 17603-1998 Method for outdoor exposure testing of photodegradable plastics
GB/T 2546.2-2022 Plastics—Polypropylene(PP) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 13525-1992 Test method for tensile-impact property of plastics
GB/T 12010.1-2008 Plastics - Poly(vinyl alcohol)(PVAL) materials - Part 1: Designation system and basis for specifications
GB/T 1034-1998 Plastics―Determination of water absorption
GB/T 8946-1998 Plastic woven sack
GB/T 19467.2-2004 Plastics - Acquistion and presentation of comparable single-point data - Part 2:Long-fibre-reinforced plastics
GB/T 14486-1993 Dimensional tolerances for plastic engineering moulded plastic pats
GB/T 17689-1999 Geosynthetics--Plastic geogrid
GB/T 4169.3-2006 Components of injection moulds for plastics - Part 3: Headed guide bush
GB/T 4169.10-2006 Components of injection moulds for plastics - Part 10: Support pillar
GB/T 4610-2008 Plastics - Determination of ignition temperature using a hot-air furnace
GB 9330.1-1988 Plastic insulated control cables-General
GB/T 3398.1-2008 Plastics - Determination of hardness - Part 1: Ball indentation method
GB/T 27915-2011 Assembled plastic pallet
GB/T 19000.2-1998 Quality management and quality assurance standards--Part 2: Generic guidelines for the application of GB/T 19001, GB/T 19002 and GB/T 19003
GB/T 2412-2008 Plastics - Polypropylene(PP)and propylene copolymer thermoplastics- Determination of isotactic index
GB 15065-1994 Black polyethylene compounds for wire and cable
GB/T 41879-2022 Plastics—Burning behaviour—Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
GB/T 4169.19-2006 Components of injection moulds for plastics - Part 19: Sprue bush
GB/T 22271.1-2008 Plastics - Polyoxymethylene(POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications
GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
GB/T 16288-2008 Marking of plastics products
GB/T 41638.3-2023 Plastics—Carbon and environmental footprint of biobased plastics—Part 3:Process carbon footprint—Requirements and guidelines for quantification
GB/T 24148.2-2009 Plastics—Unsaturated-polyester resins (UP-R)Part 2:Preparation of test specimens and determination of properties
GB/T 19812.2-2005 Plastic equipment for water saving irrigation--Part 2:Pressure compensating emitter and emitting pipe
GB/T 21989-2008 Plastics - Poly(vinyl chloride)pastes - Determination of apparent viscosity using the severs rheometer
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics
GB/T 4169.13-2006 Components of injection moulds for plastics ― Part 13: Return pin
GB/T 14216-1993 Plastics－Film and sheeting－Test method for wetting tension
GB/T 16276-1996 Test method for blocking of plastic film
GB/T 41638.1-2022 Plastics—Carbon and environmental footprint of biobased plastics—Part 1:General principles
GB/T 8333-2022 Plastic—Test method for flammability of rigid cellular plastic—Virtical burning method
GB/T 2410-2008 Determination of the luminous transmittance and haze of transparent plastics
GB/T 12554-2006 Specifiication of injection moulds for plastics
GB/Z 37839-2019 Information model covering the contents of GB/T 5094.1 and GB/T 5094.2,GB/T 16679, GB/T 18656 and GB/T 16901.3
GB/T 28018-2011 Biodegradable plastic refuse sack
GB/T 6343-1995 Cellular plastics and rubbers―Determination of apparent (bulk) density
GB/T 21460.1-2008 Plastics － Styrene-acrylonitrile (SAN) moulding and extrusion materials － Part 1: Designation system and basis for specifications
GB/T 14484-2008 Plastics - Determination of bearing strength
GB/T 21460.2-2008 Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
GB/T 1034-2008 Plastics - Determination of water absorption
GB/T 12002-1989 Sealing strips for plastic doors and windows
GB/T 3403-1982 The designation of aminoplastic moulding compounds
GB/T 28494-2012 Globe valves of thermoplastics materials
GB/T 8324-1987 Test method for bulk factor of moulding materials
GB/T 12010.3-2010 Plastic—Poly(vinyl alcohol)(PVAL) materials—Part 3:Specification
GB/T 4217-2008 Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures
GB/T 32363.1-2015 Plastics―Polyamide(PA)moulding and extrusion materials―Part 1:Designation system and basis for specification
GB/T 4616-2008 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
GB/T 11997-1989 Plastics--Preparation and use of multipurpose test specimens
GB/T 11016.1-2009 Plastic or rubber insulated telephone cords - Part 1: General
GB/T 19812.6-2022 Plastic equipment for water saving irrigation—Part 6: Polyethylene (PE) pipes for water supply
GB/T 3402.2-2010 Plastics—Homopolymer and copolymer resins of vinyl chloride—Part 2:Preparation of test samples and determination of properties
GB/T 14694-1993 Plastics. Determination of compressive elastic modulus
GB/T 12555.5-1990 Injection mould for plastic large-size mould bases--Support plates
GB/T 13376-2008 Plastic scintillators
GB/T 12010.4-2010 Plastic—Poly(vinyl alcohol)(PVAL) materials—Part 4:Determination for pH value
GB/T 8947-1998 Composite plastic woven sack
GB/T 31134-2014 Fiber reinforced epoxy powder moulding compounds(EP-PMC) for electrical purposes
GB/T 12006.2-2009 Plastics—Polyamides—Part 2:Determination of water content
GB/T 41927-2022 Plastics—Thermosetting moulding materials—Evaluation of short-term performance at elevated temperatures
GB 12002-1989 Sealing strips for plastic doors and windows
GB/T 7141-2008 Plastics - Methods of heat aging
GB/T 4169.8-2006 Components of injection moulds for plastics ― Part 8:Mould plate
GB/T 31729-2015 Test method for mass per unit area of plastic film
GB/T 1634.2-2004 Plastics—Determination of temperature of deflection under load—Part 2:Plastics,ebonite and long-fibre-reinforced composites
GB/T 11998-1989 Determination of glass transition temperature of plastics--Thermomechanical analysis
GB/T 41936.1-2022 Plastics—Determination of stiffness in torsion of flexible materials—Part 1: General method
GB/T 16288-1996 Marking for plastic packing products recycling
GB/T 12556-2006 Specification of injection mould bases for plastics
GB/T 27725-2011 Butterfly valves of thermoplastics materials
GB/T 25941-2010 Plastic vacuum forming machine
GB/T 41758.1-2022 Plastics―Polyketone (PK) moulding and extrusion materials―Part 1:Designation system and basis for specifications
GB/T 19274-2003 Geosynthetics - Plastic geocell
GB/T 4170-2006 Specification of components of injection moulds for plastics
GB/T 17690-1999 Geosynthetics--Plastic woven film yarn geotextile
GB/T 24149.1-2009 Plastics—Polypropylene(PP)compound for automobile—Part 1:Bumper
GB/T 1041-1992 Plastics--Determination of compressive properties
GB/T 21333-2008 Rigid cellular plastics - Test methods for self-skinned high-density materials
GB/T 12555.11-1990 Injection mould for plastic large-size mould bases -Stralght guide bushes
GB/T 3398.2-2008 Plastics - Determination of hardness - Part 2: Rockwell hardness
GB/T 1844.1-2022 Plastics—Symbols and abbreviated terms—Part 1:Basic polymers and their special characteristics
GB/T 8846-1988 Terminology of mould for plastics
GB/T 41936.2-2022 Plastics—Determination of stiffness in torsion of flexible materials—Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
GB/T 2546.2-2003 Plastics - Polypropylene(PP) moulding and extrusion materials - Part 2 : Preparation of test speciments and determination of properties
GB/T 13578-1992 Rubber and plactics calender
GB/T 14154-1993 doors - Vertical load test
GB/T 1040-1992 Plastics-Determination of tensile properties
GB/T 1039-1992 Plastics-General rules for the test method of mechanical properties
GB/T 19603-2004 Test method for drop-proof properties of drop-proof plastic films
GB 21660-2008 General requirement for environmental protection,safety,identification and marking of plastic shopping bags
GB/T 14216-2008 Plastics - Film and sheeting - Determination of wetting tension
GB/T 30923-2022 Plastics—Polypropylene（PP） materials for meltblown
GB/T 35840.4-2020 Steels for plastic mould—Part 4: Pre-hardenging steel plate
GB/T 25197-2010 Welded static non-pressurized thermoplastic tanks
GB/T 18744-2002 Geosynthetics--Plastic three dimensional erosion control mat
GB/T 9345.1-2008 Plastics - Determination of ash - Part 1: Generalmethods
GB/T 41877.2-2022 Plastics—Ethylene-vinyl alcohol (EVOH) copolymer moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties
GB/T 3403.3-2013 Plastics―Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds(UF-and UF/MF-PMCs)―Part 3:Requirements for selected moulding compounds
GB/T 12008.2-2010 Plastics—Polyether polyols—Part 2:Specification
GB/T 1036-2008 Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer
GB/T 1036-1989 Determination for coefficient of linear expansion of plastics
GB/T 12556.2-1990 Injection mould for plastic Specifications for medium size and small size mould bases
GB/T 30768-2014 Paper and plastics laminated films and pouches for food packaging
GB/T 4169.6-2006 Components of injection moulds for plastics - Part 6: Spacer block
GB/T 21283.6-2015 Rotary shaft lip-type seals incorporating thermoplastic sealing elements―Part 6:Properties requirements for the thermoplastic and elastic material
GB/T 4169.9-2006 Components of injection moulds for plastics - Part 9: Stop pin

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 3960-2016 Plastics―Test method for friction and wear by sliding
GB/T 24149.2-2017 Plastics-Polypropylene(PP) compound for automobile-Part 2:Instrument panel
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method
GB/T 24149.3-2017 Plastics-Polypropylene(PP) compound for automobile-Part 3:Door panel

未注明发布机构

GB/T 30842:2014